ALSA: hda - Improve naming rule for primary output
When the volume or mute control of the primary output is shared with
other (headphone or speaker) outputs, we shouldn't name it as a
specific output type but rather name it with the channel name or a
generic name like "PCM".
Also, this check should be performed individually for the volume and
the mute controls because some codecs may have shared volumes but
separate mute controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index f946714..ef4c04a 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -825,19 +825,27 @@
return add_sw_ctl(codec, pfx, cidx, chs, path);
}
+/* any ctl assigned to the path with the given index? */
+static bool path_has_mixer(struct hda_codec *codec, int path_idx, int ctl_type)
+{
+ struct nid_path *path = snd_hda_get_path_from_idx(codec, path_idx);
+ return path && path->ctls[ctl_type];
+}
+
static const char * const channel_name[4] = {
"Front", "Surround", "CLFE", "Side"
};
/* give some appropriate ctl name prefix for the given line out channel */
-static const char *get_line_out_pfx(struct hda_gen_spec *spec, int ch,
- bool can_be_master, int *index)
+static const char *get_line_out_pfx(struct hda_codec *codec, int ch,
+ int *index, int ctl_type)
{
+ struct hda_gen_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
*index = 0;
if (cfg->line_outs == 1 && !spec->multi_ios &&
- !cfg->hp_outs && !cfg->speaker_outs && can_be_master)
+ !cfg->hp_outs && !cfg->speaker_outs)
return spec->vmaster_mute.hook ? "PCM" : "Master";
/* if there is really a single DAC used in the whole output paths,
@@ -847,24 +855,41 @@
!spec->multiout.hp_out_nid[0] && !spec->multiout.extra_out_nid[0])
return spec->vmaster_mute.hook ? "PCM" : "Master";
+ /* multi-io channels */
+ if (ch >= cfg->line_outs)
+ return channel_name[ch];
+
switch (cfg->line_out_type) {
case AUTO_PIN_SPEAKER_OUT:
+ /* if the primary channel vol/mute is shared with HP volume,
+ * don't name it as Speaker
+ */
+ if (!ch && cfg->hp_outs &&
+ !path_has_mixer(codec, spec->hp_paths[0], ctl_type))
+ break;
if (cfg->line_outs == 1)
return "Speaker";
if (cfg->line_outs == 2)
return ch ? "Bass Speaker" : "Speaker";
break;
case AUTO_PIN_HP_OUT:
+ /* if the primary channel vol/mute is shared with spk volume,
+ * don't name it as Headphone
+ */
+ if (!ch && cfg->speaker_outs &&
+ !path_has_mixer(codec, spec->speaker_paths[0], ctl_type))
+ break;
/* for multi-io case, only the primary out */
if (ch && spec->multi_ios)
break;
*index = ch;
return "Headphone";
- default:
- if (cfg->line_outs == 1 && !spec->multi_ios)
- return "PCM";
- break;
}
+
+ /* for a single channel output, we don't have to name the channel */
+ if (cfg->line_outs == 1 && !spec->multi_ios)
+ return "PCM";
+
if (ch >= ARRAY_SIZE(channel_name)) {
snd_BUG();
return "PCM";
@@ -1626,16 +1651,11 @@
int index;
struct nid_path *path;
- if (i >= cfg->line_outs) {
- index = 0;
- name = channel_name[i];
- } else {
- name = get_line_out_pfx(spec, i, true, &index);
- }
-
path = snd_hda_get_path_from_idx(codec, spec->out_paths[i]);
if (!path)
continue;
+
+ name = get_line_out_pfx(codec, i, &index, NID_PATH_VOL_CTL);
if (!name || !strcmp(name, "CLFE")) {
/* Center/LFE */
err = add_vol_ctl(codec, "Center", 0, 1, path);
@@ -1644,6 +1664,14 @@
err = add_vol_ctl(codec, "LFE", 0, 2, path);
if (err < 0)
return err;
+ } else {
+ err = add_stereo_vol(codec, name, index, path);
+ if (err < 0)
+ return err;
+ }
+
+ name = get_line_out_pfx(codec, i, &index, NID_PATH_MUTE_CTL);
+ if (!name || !strcmp(name, "CLFE")) {
err = add_sw_ctl(codec, "Center", 0, 1, path);
if (err < 0)
return err;
@@ -1651,9 +1679,6 @@
if (err < 0)
return err;
} else {
- err = add_stereo_vol(codec, name, index, path);
- if (err < 0)
- return err;
err = add_stereo_sw(codec, name, index, path);
if (err < 0)
return err;