drm/i915: Pull some watermarks state into a separate structure
There is a bunch of global state that needs to be considered when
checking watermarks for validity. Move most of that to a new
structure intel_wm_config, to avoid having to pass around so
many variables.
One notable thing left out is the DDB partitioning information,
since we often anyway need to check the same watermarks against
both 1/2 and 5/6 DDB partitioning layouts.
v2: s/pipes_active/num_pipes_active
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index a4c3c54..550f787 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2188,6 +2188,14 @@
bool enable_fbc_wm;
};
+/* used in computing the new watermarks state */
+struct intel_wm_config {
+ unsigned int num_pipes_active;
+ bool sprites_enabled;
+ bool sprites_scaled;
+ bool fbc_wm_enabled;
+};
+
/*
* For both WM_PIPE and WM_LP.
* mem_value must be in 0.1us units.
@@ -2281,8 +2289,7 @@
/* Calculate the maximum primary/sprite plane watermark */
static unsigned int ilk_plane_wm_max(const struct drm_device *dev,
int level,
- unsigned int num_pipes_active,
- bool sprite_enabled,
+ const struct intel_wm_config *config,
enum intel_ddb_partitioning ddb_partitioning,
bool is_sprite)
{
@@ -2290,11 +2297,11 @@
unsigned int max;
/* if sprites aren't enabled, sprites get nothing */
- if (is_sprite && !sprite_enabled)
+ if (is_sprite && !config->sprites_enabled)
return 0;
/* HSW allows LP1+ watermarks even with multiple pipes */
- if (level == 0 || num_pipes_active > 1) {
+ if (level == 0 || config->num_pipes_active > 1) {
fifo_size /= INTEL_INFO(dev)->num_pipes;
/*
@@ -2306,7 +2313,7 @@
fifo_size /= 2;
}
- if (sprite_enabled) {
+ if (config->sprites_enabled) {
/* level 0 is always calculated with 1:1 split */
if (level > 0 && ddb_partitioning == INTEL_DDB_PART_5_6) {
if (is_sprite)
@@ -2333,10 +2340,11 @@
/* Calculate the maximum cursor plane watermark */
static unsigned int ilk_cursor_wm_max(const struct drm_device *dev,
- int level, unsigned int num_pipes_active)
+ int level,
+ const struct intel_wm_config *config)
{
/* HSW LP1+ watermarks w/ multiple pipes */
- if (level > 0 && num_pipes_active > 1)
+ if (level > 0 && config->num_pipes_active > 1)
return 64;
/* otherwise just report max that registers can hold */
@@ -2355,16 +2363,13 @@
static void ilk_wm_max(struct drm_device *dev,
int level,
- unsigned int num_pipes_active,
- bool sprite_enabled,
+ const struct intel_wm_config *config,
enum intel_ddb_partitioning ddb_partitioning,
struct hsw_wm_maximums *max)
{
- max->pri = ilk_plane_wm_max(dev, level, num_pipes_active,
- sprite_enabled, ddb_partitioning, false);
- max->spr = ilk_plane_wm_max(dev, level, num_pipes_active,
- sprite_enabled, ddb_partitioning, true);
- max->cur = ilk_cursor_wm_max(dev, level, num_pipes_active);
+ max->pri = ilk_plane_wm_max(dev, level, config, ddb_partitioning, false);
+ max->spr = ilk_plane_wm_max(dev, level, config, ddb_partitioning, true);
+ max->cur = ilk_cursor_wm_max(dev, level, config);
max->fbc = ilk_fbc_wm_max();
}
@@ -2614,7 +2619,7 @@
struct drm_crtc *crtc;
struct drm_plane *plane;
enum pipe pipe;
- int pipes_active = 0, sprites_enabled = 0;
+ struct intel_wm_config config = {};
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
@@ -2627,7 +2632,7 @@
if (!p->active)
continue;
- pipes_active++;
+ config.num_pipes_active++;
p->pipe_htotal = intel_crtc->config.adjusted_mode.htotal;
p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc);
@@ -2649,17 +2654,14 @@
p->spr_bytes_per_pixel = intel_plane->wm.bytes_per_pixel;
p->spr_horiz_pixels = intel_plane->wm.horiz_pixels;
- if (p->sprite_enabled)
- sprites_enabled++;
+ config.sprites_enabled |= p->sprite_enabled;
}
- ilk_wm_max(dev, 1, pipes_active, sprites_enabled,
- INTEL_DDB_PART_1_2, lp_max_1_2);
+ ilk_wm_max(dev, 1, &config, INTEL_DDB_PART_1_2, lp_max_1_2);
/* 5/6 split only in single pipe config on IVB+ */
- if (INTEL_INFO(dev)->gen >= 7 && pipes_active <= 1)
- ilk_wm_max(dev, 1, pipes_active, sprites_enabled,
- INTEL_DDB_PART_5_6, lp_max_5_6);
+ if (INTEL_INFO(dev)->gen >= 7 && config.num_pipes_active <= 1)
+ ilk_wm_max(dev, 1, &config, INTEL_DDB_PART_5_6, lp_max_5_6);
else
*lp_max_5_6 = *lp_max_1_2;
}