wan: Update to current logging forms
Use pr_fmt, pr_<level> and netdev_<level> as appropriate.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index 0806232..0e57690 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -36,6 +36,8 @@
* Synchronous mode without DMA is unlikely to pass about 2400 baud.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
@@ -365,7 +367,7 @@
c->count=0;
if(stat&Rx_OVR)
{
- printk(KERN_WARNING "%s: overrun\n", c->dev->name);
+ pr_warn("%s: overrun\n", c->dev->name);
c->rx_overrun++;
}
if(stat&CRC_ERR)
@@ -464,12 +466,12 @@
if (altered & chan->dcdcheck)
{
if (status & chan->dcdcheck) {
- printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
+ pr_info("%s: DCD raised\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3] | RxENABLE);
if (chan->netdevice)
netif_carrier_on(chan->netdevice);
} else {
- printk(KERN_INFO "%s: DCD lost\n", chan->dev->name);
+ pr_info("%s: DCD lost\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE);
z8530_flush_fifo(chan);
if (chan->netdevice)
@@ -538,12 +540,12 @@
{
if(!chan->dma_tx)
{
- printk(KERN_WARNING "Hey who turned the DMA off?\n");
+ pr_warn("Hey who turned the DMA off?\n");
z8530_tx(chan);
return;
}
/* This shouldn't occur in DMA mode */
- printk(KERN_ERR "DMA tx - bogus event!\n");
+ pr_err("DMA tx - bogus event!\n");
z8530_tx(chan);
}
@@ -585,12 +587,12 @@
if (altered & chan->dcdcheck)
{
if (status & chan->dcdcheck) {
- printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
+ pr_info("%s: DCD raised\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3] | RxENABLE);
if (chan->netdevice)
netif_carrier_on(chan->netdevice);
} else {
- printk(KERN_INFO "%s:DCD lost\n", chan->dev->name);
+ pr_info("%s: DCD lost\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE);
z8530_flush_fifo(chan);
if (chan->netdevice)
@@ -712,7 +714,7 @@
if(locker)
{
- printk(KERN_ERR "IRQ re-enter\n");
+ pr_err("IRQ re-enter\n");
return IRQ_NONE;
}
locker=1;
@@ -758,7 +760,8 @@
}
spin_unlock(&dev->lock);
if(work==5000)
- printk(KERN_ERR "%s: interrupt jammed - abort(0x%X)!\n", dev->name, intr);
+ pr_err("%s: interrupt jammed - abort(0x%X)!\n",
+ dev->name, intr);
/* Ok all done */
locker=0;
return IRQ_HANDLED;
@@ -1225,7 +1228,7 @@
void z8530_describe(struct z8530_dev *dev, char *mapping, unsigned long io)
{
- printk(KERN_INFO "%s: %s found at %s 0x%lX, IRQ %d.\n",
+ pr_info("%s: %s found at %s 0x%lX, IRQ %d\n",
dev->name,
z8530_type_name[dev->type],
mapping,
@@ -1621,8 +1624,7 @@
else
/* Can't occur as we dont reenable the DMA irq until
after the flip is done */
- printk(KERN_WARNING "%s: DMA flip overrun!\n",
- c->netdevice->name);
+ netdev_warn(c->netdevice, "DMA flip overrun!\n");
release_dma_lock(flags);
@@ -1637,8 +1639,7 @@
skb = dev_alloc_skb(ct);
if (skb == NULL) {
c->netdevice->stats.rx_dropped++;
- printk(KERN_WARNING "%s: Memory squeeze.\n",
- c->netdevice->name);
+ netdev_warn(c->netdevice, "Memory squeeze\n");
} else {
skb_put(skb, ct);
skb_copy_to_linear_data(skb, rxb, ct);
@@ -1678,8 +1679,7 @@
c->skb2 = dev_alloc_skb(c->mtu);
if (c->skb2 == NULL)
- printk(KERN_WARNING "%s: memory squeeze.\n",
- c->netdevice->name);
+ netdev_warn(c->netdevice, "memory squeeze\n");
else
skb_put(c->skb2, c->mtu);
c->netdevice->stats.rx_packets++;
@@ -1693,7 +1693,7 @@
c->rx_function(c, skb);
} else {
c->netdevice->stats.rx_dropped++;
- printk(KERN_ERR "%s: Lost a frame\n", c->netdevice->name);
+ netdev_err(c->netdevice, "Lost a frame\n");
}
}