[POWERPC] 83xx: Add MPC832x RDB board support.
Add support for the MPC8323E Reference Development Board (RDB). The board
is a mini-ITX reference board with 64M DDR2, 16M flash, USB, PCI,
10/100 ethernet, serial, and phone ports.
Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
new file mode 100644
index 0000000..b55bced
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -0,0 +1,291 @@
+/*
+ * MPC832x RDB Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "MPC8323ERDB";
+ compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8323@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 04000000>;
+ };
+
+ soc8323@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00000200>;
+ bus-frequency = <0>;
+
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <200 100>;
+ };
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <e 8>;
+ interrupt-parent = <&pic>;
+ dfsrr;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <0>;
+ interrupts = <9 8>;
+ interrupt-parent = <&pic>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>;
+ clock-frequency = <0>;
+ interrupts = <a 8>;
+ interrupt-parent = <&pic>;
+ };
+
+ crypto@30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <30000 7000>;
+ interrupts = <b 8>;
+ interrupt-parent = <&pic>;
+ /* Rev. 2.2 */
+ num-channels = <1>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <0000004c>;
+ descriptor-types-mask = <0122003f>;
+ };
+
+ pci@8500 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x10 AD16 (USB) */
+ 8000 0 0 1 &pic 11 8
+
+ /* IDSEL 0x11 AD17 (Mini1)*/
+ 8800 0 0 1 &pic 12 8
+ 8800 0 0 2 &pic 13 8
+ 8800 0 0 3 &pic 14 8
+ 8800 0 0 4 &pic 30 8
+
+ /* IDSEL 0x12 AD18 (PCI/Mini2) */
+ 9000 0 0 1 &pic 13 8
+ 9000 0 0 2 &pic 14 8
+ 9000 0 0 3 &pic 30 8
+ 9000 0 0 4 &pic 11 8>;
+
+ interrupt-parent = <&pic>;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <42000000 0 80000000 80000000 0 10000000
+ 02000000 0 90000000 90000000 0 10000000
+ 01000000 0 d0000000 d0000000 0 04000000>;
+ clock-frequency = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8500 100>;
+ compatible = "83xx";
+ device_type = "pci";
+ };
+
+ pic:pic@700 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <700 100>;
+ built-in;
+ device_type = "ipic";
+ };
+
+ par_io@1400 {
+ reg = <1400 100>;
+ device_type = "par_io";
+ num-ports = <7>;
+
+ ucc2pio:ucc_pin@02 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 3 4 3 0 2 0 /* MDIO */
+ 3 5 1 0 2 0 /* MDC */
+ 3 15 2 0 1 0 /* RX_CLK (CLK16) */
+ 3 17 2 0 1 0 /* TX_CLK (CLK3) */
+ 0 12 1 0 1 0 /* TxD0 */
+ 0 13 1 0 1 0 /* TxD1 */
+ 0 14 1 0 1 0 /* TxD2 */
+ 0 15 1 0 1 0 /* TxD3 */
+ 0 16 2 0 1 0 /* RxD0 */
+ 0 17 2 0 1 0 /* RxD1 */
+ 0 18 2 0 1 0 /* RxD2 */
+ 0 19 2 0 1 0 /* RxD3 */
+ 0 1a 2 0 1 0 /* RX_ER */
+ 0 1b 1 0 1 0 /* TX_ER */
+ 0 1c 2 0 1 0 /* RX_DV */
+ 0 1d 2 0 1 0 /* COL */
+ 0 1e 1 0 1 0 /* TX_EN */
+ 0 1f 2 0 1 0>; /* CRS */
+ };
+ ucc3pio:ucc_pin@03 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0 d 2 0 1 0 /* RX_CLK (CLK9) */
+ 3 18 2 0 1 0 /* TX_CLK (CLK10) */
+ 1 0 1 0 1 0 /* TxD0 */
+ 1 1 1 0 1 0 /* TxD1 */
+ 1 2 1 0 1 0 /* TxD2 */
+ 1 3 1 0 1 0 /* TxD3 */
+ 1 4 2 0 1 0 /* RxD0 */
+ 1 5 2 0 1 0 /* RxD1 */
+ 1 6 2 0 1 0 /* RxD2 */
+ 1 7 2 0 1 0 /* RxD3 */
+ 1 8 2 0 1 0 /* RX_ER */
+ 1 9 1 0 1 0 /* TX_ER */
+ 1 a 2 0 1 0 /* RX_DV */
+ 1 b 2 0 1 0 /* COL */
+ 1 c 1 0 1 0 /* TX_EN */
+ 1 d 2 0 1 0>; /* CRS */
+ };
+ };
+ };
+
+ qe@e0100000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ model = "QE";
+ ranges = <0 e0100000 00100000>;
+ reg = <e0100000 480>;
+ brg-frequency = <0>;
+ bus-frequency = <BCD3D80>;
+
+ muram@10000 {
+ device_type = "muram";
+ ranges = <0 00010000 00004000>;
+
+ data-only@0 {
+ reg = <0 4000>;
+ };
+ };
+
+ spi@4c0 {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <4c0 40>;
+ interrupts = <2>;
+ interrupt-parent = <&qeic>;
+ mode = "cpu";
+ };
+
+ spi@500 {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <500 40>;
+ interrupts = <1>;
+ interrupt-parent = <&qeic>;
+ mode = "cpu";
+ };
+
+ ucc@3000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <2>;
+ reg = <3000 200>;
+ interrupts = <21>;
+ interrupt-parent = <&qeic>;
+ mac-address = [ 00 04 9f ef 03 02 ];
+ rx-clock = <20>;
+ tx-clock = <13>;
+ phy-handle = <&phy00>;
+ pio-handle = <&ucc2pio>;
+ };
+
+ ucc@2200 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <3>;
+ reg = <2200 200>;
+ interrupts = <22>;
+ interrupt-parent = <&qeic>;
+ mac-address = [ 00 04 9f ef 03 01 ];
+ rx-clock = <19>;
+ tx-clock = <1a>;
+ phy-handle = <&phy04>;
+ pio-handle = <&ucc3pio>;
+ };
+
+ mdio@3120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3120 18>;
+ device_type = "mdio";
+ compatible = "ucc_geth_phy";
+
+ phy00:ethernet-phy@00 {
+ interrupt-parent = <&pic>;
+ interrupts = <0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ interface = <3>; //ENET_100_MII
+ };
+ phy04:ethernet-phy@04 {
+ interrupt-parent = <&pic>;
+ interrupts = <0>;
+ reg = <4>;
+ device_type = "ethernet-phy";
+ interface = <3>;
+ };
+ };
+
+ qeic:qeic@80 {
+ interrupt-controller;
+ device_type = "qeic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <80 80>;
+ built-in;
+ big-endian;
+ interrupts = <20 8 21 8>; //high:32 low:33
+ interrupt-parent = <&pic>;
+ };
+ };
+};