ARM: dts: meson: organize devices in their corresponding busses
The Amlogic Meson SoCs have most of the internal peripherals organized
in busses. Use them to make the dts easier to read and to avoid
duplicated register (bus) offset definitions.
The bus information is taken from the vendor kernel:
#define IO_CBUS_PHY_BASE 0xc1100000 ///2M
#define IO_AOBUS_PHY_BASE 0xc8100000 ///1M
There are more internal busses (such as the abp bus which seems to
contain audio, HDMI and Mali registers), but since we don't have
drivers for them yet these are not added (yet).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[khilman: minor whitespace fix]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 8c77c87..8d9c369 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -65,100 +65,108 @@
#interrupt-cells = <3>;
};
- timer@c1109940 {
- compatible = "amlogic,meson6-timer";
- reg = <0xc1109940 0x18>;
- interrupts = <0 10 1>;
- };
-
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- wdt: watchdog@c1109900 {
- compatible = "amlogic,meson6-wdt";
- reg = <0xc1109900 0x8>;
- interrupts = <0 0 1>;
- };
-
- uart_AO: serial@c81004c0 {
- compatible = "amlogic,meson-uart";
- reg = <0xc81004c0 0x18>;
- interrupts = <0 90 1>;
- clocks = <&clk81>;
- status = "disabled";
- };
-
- uart_A: serial@c11084c0 {
- compatible = "amlogic,meson-uart";
- reg = <0xc11084c0 0x18>;
- interrupts = <0 26 1>;
- clocks = <&clk81>;
- status = "disabled";
- };
-
- uart_B: serial@c11084dc {
- compatible = "amlogic,meson-uart";
- reg = <0xc11084dc 0x18>;
- interrupts = <0 75 1>;
- clocks = <&clk81>;
- status = "disabled";
- };
-
- uart_C: serial@c1108700 {
- compatible = "amlogic,meson-uart";
- reg = <0xc1108700 0x18>;
- interrupts = <0 93 1>;
- clocks = <&clk81>;
- status = "disabled";
- };
-
- i2c_AO: i2c@c8100500 {
- compatible = "amlogic,meson6-i2c";
- reg = <0xc8100500 0x20>;
- interrupts = <0 92 1>;
- clocks = <&clk81>;
+ cbus: cbus@c1100000 {
+ compatible = "simple-bus";
+ reg = <0xc1100000 0x200000>;
#address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ #size-cells = <1>;
+ ranges = <0x0 0xc1100000 0x200000>;
+
+ uart_A: serial@84c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x84c0 0x18>;
+ interrupts = <0 26 1>;
+ status = "disabled";
+ };
+
+ uart_B: serial@84dc {
+ compatible = "amlogic,meson-uart";
+ reg = <0x84dc 0x18>;
+ interrupts = <0 75 1>;
+ status = "disabled";
+ };
+
+ i2c_A: i2c@8500 {
+ compatible = "amlogic,meson6-i2c";
+ reg = <0x8500 0x20>;
+ interrupts = <0 21 1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart_C: serial@8700 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x8700 0x18>;
+ interrupts = <0 93 1>;
+ status = "disabled";
+ };
+
+ i2c_B: i2c@87c0 {
+ compatible = "amlogic,meson6-i2c";
+ reg = <0x87c0 0x20>;
+ interrupts = <0 128 1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spifc: spi@8c80 {
+ compatible = "amlogic,meson6-spifc";
+ reg = <0x8c80 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ wdt: watchdog@9900 {
+ compatible = "amlogic,meson6-wdt";
+ reg = <0x9900 0x8>;
+ interrupts = <0 0 1>;
+ };
+
+ timer@9940 {
+ compatible = "amlogic,meson6-timer";
+ reg = <0x9940 0x18>;
+ interrupts = <0 10 1>;
+ };
};
- i2c_A: i2c@c1108500 {
- compatible = "amlogic,meson6-i2c";
- reg = <0xc1108500 0x20>;
- interrupts = <0 21 1>;
- clocks = <&clk81>;
+ aobus: aobus@c8100000 {
+ compatible = "simple-bus";
+ reg = <0xc8100000 0x100000>;
#address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
+ #size-cells = <1>;
+ ranges = <0x0 0xc8100000 0x100000>;
- i2c_B: i2c@c11087c0 {
- compatible = "amlogic,meson6-i2c";
- reg = <0xc11087c0 0x20>;
- interrupts = <0 128 1>;
- clocks = <&clk81>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
+ ir_receiver: ir-receiver@480 {
+ compatible= "amlogic,meson6-ir";
+ reg = <0x480 0x20>;
+ interrupts = <0 15 1>;
+ status = "disabled";
+ };
- ir_receiver: ir-receiver@c8100480 {
- compatible= "amlogic,meson6-ir";
- reg = <0xc8100480 0x20>;
- interrupts = <0 15 1>;
- status = "disabled";
- };
+ uart_AO: serial@4c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x4c0 0x18>;
+ interrupts = <0 90 1>;
+ status = "disabled";
+ };
- spifc: spi@c1108c80 {
- compatible = "amlogic,meson6-spifc";
- reg = <0xc1108c80 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clk81>;
- status = "disabled";
+ i2c_AO: i2c@500 {
+ compatible = "amlogic,meson6-i2c";
+ reg = <0x500 0x20>;
+ interrupts = <0 92 1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
ethmac: ethernet@c9410000 {
@@ -167,8 +175,6 @@
0xc1108108 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
- clocks = <&clk81>;
- clock-names = "stmmaceth";
status = "disabled";
};
};