arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
Add nodes for the onboard USB hub on trogdor devices. Remove the
'always-on' property from the hub regulator, since the regulator
is now managed by the onboard_usb_hub driver.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210609150159.v12.5.Ie0d2c1214b767bb5551dd4cad38398bd40e4466f@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
index 5c997cd..bae85f6 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
@@ -23,17 +23,6 @@ &charger_thermal {
status = "disabled";
};
-&pp3300_hub {
- /* pp3300_l7c is used to power the USB hub */
- /delete-property/regulator-always-on;
- /delete-property/regulator-boot-on;
-};
-
-&pp3300_l7c {
- regulator-always-on;
- regulator-boot-on;
-};
-
&sn65dsi86_out {
/*
* Lane 0 was incorrectly mapped on the cable, but we've now decided
@@ -42,3 +31,11 @@ &sn65dsi86_out {
*/
lane-polarities = <1 0>;
};
+
+&usb_hub_2_0 {
+ vdd-supply = <&pp3300_l7c>;
+};
+
+&usb_hub_3_0 {
+ vdd-supply = <&pp3300_l7c>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
index d9fbcc7..343ed45 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -23,13 +23,11 @@ &charger_thermal {
status = "disabled";
};
-&pp3300_hub {
- /* pp3300_l7c is used to power the USB hub */
- /delete-property/regulator-always-on;
- /delete-property/regulator-boot-on;
+
+&usb_hub_2_0 {
+ vdd-supply = <&pp3300_l7c>;
};
-&pp3300_l7c {
- regulator-always-on;
- regulator-boot-on;
+&usb_hub_3_0 {
+ vdd-supply = <&pp3300_l7c>;
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index 2b522f9..2f5263e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -42,17 +42,6 @@ &panel {
compatible = "auo,b116xa01";
};
-&pp3300_hub {
- /* pp3300_l7c is used to power the USB hub */
- /delete-property/regulator-always-on;
- /delete-property/regulator-boot-on;
-};
-
-&pp3300_l7c {
- regulator-always-on;
- regulator-boot-on;
-};
-
&sdhc_2 {
status = "okay";
};
@@ -61,6 +50,14 @@ &trackpad {
interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
};
+&usb_hub_2_0 {
+ vdd-supply = <&pp3300_l7c>;
+};
+
+&usb_hub_3_0 {
+ vdd-supply = <&pp3300_l7c>;
+};
+
/* PINCTRL - modifications to sc7180-trogdor.dtsi */
&trackpad_int_1v8_odl {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 24d293e..0436418 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -207,7 +207,6 @@ pp3300_hub: pp3300-hub {
pinctrl-names = "default";
pinctrl-0 = <&en_pp3300_hub>;
- regulator-always-on;
regulator-boot-on;
vin-supply = <&pp3300_a>;
@@ -906,6 +905,24 @@ &usb_1 {
&usb_1_dwc3 {
dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ usb_hub_2_0: hub@1 {
+ compatible = "usbbda,5411";
+ reg = <1>;
+ vdd-supply = <&pp3300_hub>;
+ companion-hub = <&usb_hub_3_0>;
+ };
+
+ /* 3.0 hub on port 2 */
+ usb_hub_3_0: hub@2 {
+ compatible = "usbbda,411";
+ reg = <2>;
+ vdd-supply = <&pp3300_hub>;
+ companion-hub = <&usb_hub_2_0>;
+ };
};
&usb_1_hsphy {