Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h
new file mode 100644
index 0000000..c201b52
--- /dev/null
+++ b/drivers/scsi/pcmcia/nsp_cs.h
@@ -0,0 +1,472 @@
+/*=======================================================/
+ Header file for nsp_cs.c
+ By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
+
+ Ver.1.0 : Cut unused lines.
+ Ver 0.1 : Initial version.
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License.
+
+=========================================================*/
+
+/* $Id: nsp_cs.h,v 1.19 2003/08/18 11:09:19 elca Exp $ */
+
+#ifndef __nsp_cs__
+#define __nsp_cs__
+
+/* for debugging */
+//#define NSP_DEBUG 9
+
+/*
+#define static
+#define inline
+*/
+
+/************************************
+ * Some useful macros...
+ */
+#define BIT(x) (1L << (x))
+
+/* SCSI initiator must be ID 7 */
+#define NSP_INITIATOR_ID 7
+
+#define NSP_SELTIMEOUT 200
+
+/***************************************************************************
+ * register definitions
+ ***************************************************************************/
+/*========================================================================
+ * base register
+ ========================================================================*/
+#define IRQCONTROL 0x00 /* R */
+# define IRQCONTROL_RESELECT_CLEAR BIT(0)
+# define IRQCONTROL_PHASE_CHANGE_CLEAR BIT(1)
+# define IRQCONTROL_TIMER_CLEAR BIT(2)
+# define IRQCONTROL_FIFO_CLEAR BIT(3)
+# define IRQCONTROL_ALLMASK 0xff
+# define IRQCONTROL_ALLCLEAR (IRQCONTROL_RESELECT_CLEAR | \
+ IRQCONTROL_PHASE_CHANGE_CLEAR | \
+ IRQCONTROL_TIMER_CLEAR | \
+ IRQCONTROL_FIFO_CLEAR )
+# define IRQCONTROL_IRQDISABLE 0xf0
+
+#define IRQSTATUS 0x00 /* W */
+# define IRQSTATUS_SCSI BIT(0)
+# define IRQSTATUS_TIMER BIT(2)
+# define IRQSTATUS_FIFO BIT(3)
+# define IRQSTATUS_MASK 0x0f
+
+#define IFSELECT 0x01 /* W */
+# define IF_IFSEL BIT(0)
+# define IF_REGSEL BIT(2)
+
+#define FIFOSTATUS 0x01 /* R */
+# define FIFOSTATUS_CHIP_REVISION_MASK 0x0f
+# define FIFOSTATUS_CHIP_ID_MASK 0x70
+# define FIFOSTATUS_FULL_EMPTY BIT(7)
+
+#define INDEXREG 0x02 /* R/W */
+#define DATAREG 0x03 /* R/W */
+#define FIFODATA 0x04 /* R/W */
+#define FIFODATA1 0x05 /* R/W */
+#define FIFODATA2 0x06 /* R/W */
+#define FIFODATA3 0x07 /* R/W */
+
+/*====================================================================
+ * indexed register
+ ====================================================================*/
+#define EXTBUSCTRL 0x10 /* R/W,deleted */
+
+#define CLOCKDIV 0x11 /* R/W */
+# define CLOCK_40M 0x02
+# define CLOCK_20M 0x01
+# define FAST_20 BIT(2)
+
+#define TERMPWRCTRL 0x13 /* R/W */
+# define POWER_ON BIT(0)
+
+#define SCSIIRQMODE 0x15 /* R/W */
+# define SCSI_PHASE_CHANGE_EI BIT(0)
+# define RESELECT_EI BIT(4)
+# define FIFO_IRQ_EI BIT(5)
+# define SCSI_RESET_IRQ_EI BIT(6)
+
+#define IRQPHASESENCE 0x16 /* R */
+# define LATCHED_MSG BIT(0)
+# define LATCHED_IO BIT(1)
+# define LATCHED_CD BIT(2)
+# define LATCHED_BUS_FREE BIT(3)
+# define PHASE_CHANGE_IRQ BIT(4)
+# define RESELECT_IRQ BIT(5)
+# define FIFO_IRQ BIT(6)
+# define SCSI_RESET_IRQ BIT(7)
+
+#define TIMERCOUNT 0x17 /* R/W */
+
+#define SCSIBUSCTRL 0x18 /* R/W */
+# define SCSI_SEL BIT(0)
+# define SCSI_RST BIT(1)
+# define SCSI_DATAOUT_ENB BIT(2)
+# define SCSI_ATN BIT(3)
+# define SCSI_ACK BIT(4)
+# define SCSI_BSY BIT(5)
+# define AUTODIRECTION BIT(6)
+# define ACKENB BIT(7)
+
+#define SCSIBUSMON 0x19 /* R */
+
+#define SETARBIT 0x1A /* W */
+# define ARBIT_GO BIT(0)
+# define ARBIT_FLAG_CLEAR BIT(1)
+
+#define ARBITSTATUS 0x1A /* R */
+/*# define ARBIT_GO BIT(0)*/
+# define ARBIT_WIN BIT(1)
+# define ARBIT_FAIL BIT(2)
+# define RESELECT_FLAG BIT(3)
+
+#define PARITYCTRL 0x1B /* W */
+#define PARITYSTATUS 0x1B /* R */
+
+#define COMMANDCTRL 0x1C /* W */
+# define CLEAR_COMMAND_POINTER BIT(0)
+# define AUTO_COMMAND_GO BIT(1)
+
+#define RESELECTID 0x1C /* R */
+#define COMMANDDATA 0x1D /* R/W */
+
+#define POINTERCLR 0x1E /* W */
+# define POINTER_CLEAR BIT(0)
+# define ACK_COUNTER_CLEAR BIT(1)
+# define REQ_COUNTER_CLEAR BIT(2)
+# define HOST_COUNTER_CLEAR BIT(3)
+# define READ_SOURCE (BIT(4) | BIT(5))
+# define ACK_COUNTER (0)
+# define REQ_COUNTER (BIT(4))
+# define HOST_COUNTER (BIT(5))
+
+#define TRANSFERCOUNT 0x1E /* R */
+
+#define TRANSFERMODE 0x20 /* R/W */
+# define MODE_MEM8 BIT(0)
+# define MODE_MEM32 BIT(1)
+# define MODE_ADR24 BIT(2)
+# define MODE_ADR32 BIT(3)
+# define MODE_IO8 BIT(4)
+# define MODE_IO32 BIT(5)
+# define TRANSFER_GO BIT(6)
+# define BRAIND BIT(7)
+
+#define SYNCREG 0x21 /* R/W */
+# define SYNCREG_OFFSET_MASK 0x0f
+# define SYNCREG_PERIOD_MASK 0xf0
+# define SYNCREG_PERIOD_SHIFT 4
+
+#define SCSIDATALATCH 0x22 /* W */
+#define SCSIDATAIN 0x22 /* R */
+#define SCSIDATAWITHACK 0x23 /* R/W */
+#define SCAMCONTROL 0x24 /* W */
+#define SCAMSTATUS 0x24 /* R */
+#define SCAMDATA 0x25 /* R/W */
+
+#define OTHERCONTROL 0x26 /* R/W */
+# define TPL_ROM_WRITE_EN BIT(0)
+# define TPWR_OUT BIT(1)
+# define TPWR_SENSE BIT(2)
+# define RA8_CONTROL BIT(3)
+
+#define ACKWIDTH 0x27 /* R/W */
+#define CLRTESTPNT 0x28 /* W */
+#define ACKCNTLD 0x29 /* W */
+#define REQCNTLD 0x2A /* W */
+#define HSTCNTLD 0x2B /* W */
+#define CHECKSUM 0x2C /* R/W */
+
+/************************************************************************
+ * Input status bit definitions.
+ ************************************************************************/
+#define S_MESSAGE BIT(0) /* Message line from SCSI bus */
+#define S_IO BIT(1) /* Input/Output line from SCSI bus */
+#define S_CD BIT(2) /* Command/Data line from SCSI bus */
+#define S_BUSY BIT(3) /* Busy line from SCSI bus */
+#define S_ACK BIT(4) /* Acknowlege line from SCSI bus */
+#define S_REQUEST BIT(5) /* Request line from SCSI bus */
+#define S_SELECT BIT(6) /* */
+#define S_ATN BIT(7) /* */
+
+/***********************************************************************
+ * Useful Bus Monitor status combinations.
+ ***********************************************************************/
+#define BUSMON_SEL S_SELECT
+#define BUSMON_BSY S_BUSY
+#define BUSMON_REQ S_REQUEST
+#define BUSMON_IO S_IO
+#define BUSMON_ACK S_ACK
+#define BUSMON_BUS_FREE 0
+#define BUSMON_COMMAND ( S_BUSY | S_CD | S_REQUEST )
+#define BUSMON_MESSAGE_IN ( S_BUSY | S_CD | S_IO | S_MESSAGE | S_REQUEST )
+#define BUSMON_MESSAGE_OUT ( S_BUSY | S_CD | S_MESSAGE | S_REQUEST )
+#define BUSMON_DATA_IN ( S_BUSY | S_IO | S_REQUEST )
+#define BUSMON_DATA_OUT ( S_BUSY | S_REQUEST )
+#define BUSMON_STATUS ( S_BUSY | S_CD | S_IO | S_REQUEST )
+#define BUSMON_SELECT ( S_IO | S_SELECT )
+#define BUSMON_RESELECT ( S_IO | S_SELECT )
+#define BUSMON_PHASE_MASK ( S_CD | S_IO | S_MESSAGE | S_SELECT )
+
+#define BUSPHASE_SELECT ( BUSMON_SELECT & BUSMON_PHASE_MASK )
+#define BUSPHASE_COMMAND ( BUSMON_COMMAND & BUSMON_PHASE_MASK )
+#define BUSPHASE_MESSAGE_IN ( BUSMON_MESSAGE_IN & BUSMON_PHASE_MASK )
+#define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK )
+#define BUSPHASE_DATA_IN ( BUSMON_DATA_IN & BUSMON_PHASE_MASK )
+#define BUSPHASE_DATA_OUT ( BUSMON_DATA_OUT & BUSMON_PHASE_MASK )
+#define BUSPHASE_STATUS ( BUSMON_STATUS & BUSMON_PHASE_MASK )
+
+/*====================================================================*/
+
+typedef struct scsi_info_t {
+ dev_link_t link;
+ struct Scsi_Host *host;
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,74))
+ dev_node_t node;
+#else
+ int ndev;
+ dev_node_t node[8];
+ struct bus_operations *bus;
+#endif
+ int stop;
+} scsi_info_t;
+
+
+/* synchronous transfer negotiation data */
+typedef struct _sync_data {
+ unsigned int SyncNegotiation;
+#define SYNC_NOT_YET 0
+#define SYNC_OK 1
+#define SYNC_NG 2
+
+ unsigned int SyncPeriod;
+ unsigned int SyncOffset;
+ unsigned char SyncRegister;
+ unsigned char AckWidth;
+} sync_data;
+
+typedef struct _nsp_hw_data {
+ unsigned int BaseAddress;
+ unsigned int NumAddress;
+ unsigned int IrqNumber;
+
+ unsigned long MmioAddress;
+#define NSP_MMIO_OFFSET 0x0800
+ unsigned long MmioLength;
+
+ unsigned char ScsiClockDiv;
+
+ unsigned char TransferMode;
+
+ int TimerCount;
+ int SelectionTimeOut;
+ Scsi_Cmnd *CurrentSC;
+ //int CurrnetTarget;
+
+ int FifoCount;
+
+#define MSGBUF_SIZE 20
+ unsigned char MsgBuffer[MSGBUF_SIZE];
+ int MsgLen;
+
+#define N_TARGET 8
+ sync_data Sync[N_TARGET];
+
+ char nspinfo[110]; /* description */
+ spinlock_t Lock;
+
+ scsi_info_t *ScsiInfo; /* attach <-> detect glue */
+
+
+#ifdef NSP_DEBUG
+ int CmdId; /* Accepted command serial number.
+ Used for debugging. */
+#endif
+} nsp_hw_data;
+
+
+/****************************************************************************
+ *
+ */
+
+/* Card service functions */
+static dev_link_t *nsp_cs_attach (void);
+static void nsp_cs_detach (dev_link_t *link);
+static void nsp_cs_release(dev_link_t *link);
+static void nsp_cs_config (dev_link_t *link);
+static int nsp_cs_event (event_t event, int priority, event_callback_args_t *args);
+
+/* Linux SCSI subsystem specific functions */
+static struct Scsi_Host *nsp_detect (Scsi_Host_Template *sht);
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+static int nsp_detect_old (Scsi_Host_Template *sht);
+static int nsp_release_old(struct Scsi_Host *shpnt);
+#endif
+static const char *nsp_info (struct Scsi_Host *shpnt);
+static int nsp_proc_info (
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
+ struct Scsi_Host *host,
+#endif
+ char *buffer,
+ char **start,
+ off_t offset,
+ int length,
+#if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
+ int hostno,
+#endif
+ int inout);
+static int nsp_queuecommand(Scsi_Cmnd *SCpnt, void (* done)(Scsi_Cmnd *SCpnt));
+
+/* Error handler */
+/*static int nsp_eh_abort (Scsi_Cmnd *SCpnt);*/
+/*static int nsp_eh_device_reset(Scsi_Cmnd *SCpnt);*/
+static int nsp_eh_bus_reset (Scsi_Cmnd *SCpnt);
+static int nsp_eh_host_reset (Scsi_Cmnd *SCpnt);
+static int nsp_bus_reset (nsp_hw_data *data);
+
+/* */
+static int nsphw_init (nsp_hw_data *data);
+static int nsphw_start_selection(Scsi_Cmnd *SCpnt);
+static void nsp_start_timer (Scsi_Cmnd *SCpnt, int time);
+static int nsp_fifo_count (Scsi_Cmnd *SCpnt);
+static void nsp_pio_read (Scsi_Cmnd *SCpnt);
+static void nsp_pio_write (Scsi_Cmnd *SCpnt);
+static int nsp_nexus (Scsi_Cmnd *SCpnt);
+static void nsp_scsi_done (Scsi_Cmnd *SCpnt);
+static int nsp_analyze_sdtr (Scsi_Cmnd *SCpnt);
+static int nsp_negate_signal (Scsi_Cmnd *SCpnt, unsigned char mask, char *str);
+static int nsp_expect_signal (Scsi_Cmnd *SCpnt, unsigned char current_phase, unsigned char mask);
+static int nsp_xfer (Scsi_Cmnd *SCpnt, int phase);
+static int nsp_dataphase_bypass (Scsi_Cmnd *SCpnt);
+static int nsp_reselected (Scsi_Cmnd *SCpnt);
+static struct Scsi_Host *nsp_detect(Scsi_Host_Template *sht);
+
+/* Interrupt handler */
+//static irqreturn_t nspintr(int irq, void *dev_id, struct pt_regs *regs);
+
+/* Module entry point*/
+static int __init nsp_cs_init(void);
+static void __exit nsp_cs_exit(void);
+
+
+/* Debug */
+#ifdef NSP_DEBUG
+static void show_command (Scsi_Cmnd *SCpnt);
+static void show_phase (Scsi_Cmnd *SCpnt);
+static void show_busphase(unsigned char stat);
+static void show_message (nsp_hw_data *data);
+#else
+# define show_command(ptr) /* */
+# define show_phase(SCpnt) /* */
+# define show_busphase(stat) /* */
+# define show_message(data) /* */
+#endif
+
+/*
+ * SCSI phase
+ */
+enum _scsi_phase {
+ PH_UNDETERMINED ,
+ PH_ARBSTART ,
+ PH_SELSTART ,
+ PH_SELECTED ,
+ PH_COMMAND ,
+ PH_DATA ,
+ PH_STATUS ,
+ PH_MSG_IN ,
+ PH_MSG_OUT ,
+ PH_DISCONNECT ,
+ PH_RESELECT ,
+ PH_ABORT ,
+ PH_RESET
+};
+
+enum _data_in_out {
+ IO_UNKNOWN,
+ IO_IN,
+ IO_OUT
+};
+
+enum _burst_mode {
+ BURST_IO8 = 0,
+ BURST_IO32 = 1,
+ BURST_MEM32 = 2,
+};
+
+
+/**************************************************************************
+ * SCSI messaage
+ */
+#define MSG_COMMAND_COMPLETE 0x00
+#define MSG_EXTENDED 0x01
+#define MSG_ABORT 0x06
+#define MSG_NO_OPERATION 0x08
+#define MSG_BUS_DEVICE_RESET 0x0c
+
+#define MSG_EXT_SDTR 0x01
+
+
+/**************************************************************************
+ * Compatibility functions
+ */
+
+/* for Kernel 2.4 */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
+# define scsi_register_host(template) scsi_register_module(MODULE_SCSI_HA, template)
+# define scsi_unregister_host(template) scsi_unregister_module(MODULE_SCSI_HA, template)
+# define scsi_host_put(host) scsi_unregister(host)
+
+typedef void irqreturn_t;
+# define IRQ_NONE /* */
+# define IRQ_HANDLED /* */
+# define IRQ_RETVAL(x) /* */
+
+/* This is ad-hoc version of scsi_host_get_next() */
+static inline struct Scsi_Host *scsi_host_get_next(struct Scsi_Host *host)
+{
+ if (host == NULL) {
+ return scsi_hostlist;
+ } else {
+ return host->next;
+ }
+}
+
+/* This is ad-hoc version of scsi_host_hn_get() */
+static inline struct Scsi_Host *scsi_host_hn_get(unsigned short hostno)
+{
+ struct Scsi_Host *host;
+
+ for (host = scsi_host_get_next(NULL); host != NULL;
+ host = scsi_host_get_next(host)) {
+ if (host->host_no == hostno) {
+ break;
+ }
+ }
+
+ return host;
+}
+
+static void cs_error(client_handle_t handle, int func, int ret)
+{
+ error_info_t err = { func, ret };
+ pcmcia_report_error(handle, &err);
+}
+
+/* scatter-gather table */
+# define BUFFER_ADDR (SCpnt->SCp.buffer->address)
+#endif
+
+/* for Kernel 2.6 */
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
+/* scatter-gather table */
+# define BUFFER_ADDR ((char *)((unsigned int)(SCpnt->SCp.buffer->page) + SCpnt->SCp.buffer->offset))
+#endif
+
+#endif /*__nsp_cs__*/
+/* end */