Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/ppc64/kernel/pSeries_iommu.c b/arch/ppc64/kernel/pSeries_iommu.c
new file mode 100644
index 0000000..6913052
--- /dev/null
+++ b/arch/ppc64/kernel/pSeries_iommu.c
@@ -0,0 +1,570 @@
+/*
+ * arch/ppc64/kernel/pSeries_iommu.c
+ *
+ * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
+ *
+ * Rewrite, cleanup:
+ *
+ * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
+ *
+ * Dynamic DMA mapping support, pSeries-specific parts, both SMP and LPAR.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/ppcdebug.h>
+#include <asm/iommu.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/abs_addr.h>
+#include <asm/plpar_wrappers.h>
+#include <asm/pSeries_reconfig.h>
+#include <asm/systemcfg.h>
+#include "pci.h"
+
+#define DBG(fmt...)
+
+extern int is_python(struct device_node *);
+
+static void tce_build_pSeries(struct iommu_table *tbl, long index,
+ long npages, unsigned long uaddr,
+ enum dma_data_direction direction)
+{
+ union tce_entry t;
+ union tce_entry *tp;
+
+ t.te_word = 0;
+ t.te_rdwr = 1; // Read allowed
+
+ if (direction != DMA_TO_DEVICE)
+ t.te_pciwr = 1;
+
+ tp = ((union tce_entry *)tbl->it_base) + index;
+
+ while (npages--) {
+ /* can't move this out since we might cross LMB boundary */
+ t.te_rpn = (virt_to_abs(uaddr)) >> PAGE_SHIFT;
+
+ tp->te_word = t.te_word;
+
+ uaddr += PAGE_SIZE;
+ tp++;
+ }
+}
+
+
+static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
+{
+ union tce_entry t;
+ union tce_entry *tp;
+
+ t.te_word = 0;
+ tp = ((union tce_entry *)tbl->it_base) + index;
+
+ while (npages--) {
+ tp->te_word = t.te_word;
+
+ tp++;
+ }
+}
+
+
+static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
+ long npages, unsigned long uaddr,
+ enum dma_data_direction direction)
+{
+ u64 rc;
+ union tce_entry tce;
+
+ tce.te_word = 0;
+ tce.te_rpn = (virt_to_abs(uaddr)) >> PAGE_SHIFT;
+ tce.te_rdwr = 1;
+ if (direction != DMA_TO_DEVICE)
+ tce.te_pciwr = 1;
+
+ while (npages--) {
+ rc = plpar_tce_put((u64)tbl->it_index,
+ (u64)tcenum << 12,
+ tce.te_word );
+
+ if (rc && printk_ratelimit()) {
+ printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
+ printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
+ printk("\ttcenum = 0x%lx\n", (u64)tcenum);
+ printk("\ttce val = 0x%lx\n", tce.te_word );
+ show_stack(current, (unsigned long *)__get_SP());
+ }
+
+ tcenum++;
+ tce.te_rpn++;
+ }
+}
+
+static DEFINE_PER_CPU(void *, tce_page) = NULL;
+
+static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
+ long npages, unsigned long uaddr,
+ enum dma_data_direction direction)
+{
+ u64 rc;
+ union tce_entry tce, *tcep;
+ long l, limit;
+
+ if (npages == 1)
+ return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+ direction);
+
+ tcep = __get_cpu_var(tce_page);
+
+ /* This is safe to do since interrupts are off when we're called
+ * from iommu_alloc{,_sg}()
+ */
+ if (!tcep) {
+ tcep = (void *)__get_free_page(GFP_ATOMIC);
+ /* If allocation fails, fall back to the loop implementation */
+ if (!tcep)
+ return tce_build_pSeriesLP(tbl, tcenum, npages,
+ uaddr, direction);
+ __get_cpu_var(tce_page) = tcep;
+ }
+
+ tce.te_word = 0;
+ tce.te_rpn = (virt_to_abs(uaddr)) >> PAGE_SHIFT;
+ tce.te_rdwr = 1;
+ if (direction != DMA_TO_DEVICE)
+ tce.te_pciwr = 1;
+
+ /* We can map max one pageful of TCEs at a time */
+ do {
+ /*
+ * Set up the page with TCE data, looping through and setting
+ * the values.
+ */
+ limit = min_t(long, npages, PAGE_SIZE/sizeof(union tce_entry));
+
+ for (l = 0; l < limit; l++) {
+ tcep[l] = tce;
+ tce.te_rpn++;
+ }
+
+ rc = plpar_tce_put_indirect((u64)tbl->it_index,
+ (u64)tcenum << 12,
+ (u64)virt_to_abs(tcep),
+ limit);
+
+ npages -= limit;
+ tcenum += limit;
+ } while (npages > 0 && !rc);
+
+ if (rc && printk_ratelimit()) {
+ printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
+ printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
+ printk("\tnpages = 0x%lx\n", (u64)npages);
+ printk("\ttce[0] val = 0x%lx\n", tcep[0].te_word);
+ show_stack(current, (unsigned long *)__get_SP());
+ }
+}
+
+static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
+{
+ u64 rc;
+ union tce_entry tce;
+
+ tce.te_word = 0;
+
+ while (npages--) {
+ rc = plpar_tce_put((u64)tbl->it_index,
+ (u64)tcenum << 12,
+ tce.te_word);
+
+ if (rc && printk_ratelimit()) {
+ printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
+ printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
+ printk("\ttcenum = 0x%lx\n", (u64)tcenum);
+ printk("\ttce val = 0x%lx\n", tce.te_word );
+ show_stack(current, (unsigned long *)__get_SP());
+ }
+
+ tcenum++;
+ }
+}
+
+
+static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
+{
+ u64 rc;
+ union tce_entry tce;
+
+ tce.te_word = 0;
+
+ rc = plpar_tce_stuff((u64)tbl->it_index,
+ (u64)tcenum << 12,
+ tce.te_word,
+ npages);
+
+ if (rc && printk_ratelimit()) {
+ printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n");
+ printk("\trc = %ld\n", rc);
+ printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
+ printk("\tnpages = 0x%lx\n", (u64)npages);
+ printk("\ttce val = 0x%lx\n", tce.te_word );
+ show_stack(current, (unsigned long *)__get_SP());
+ }
+}
+
+static void iommu_table_setparms(struct pci_controller *phb,
+ struct device_node *dn,
+ struct iommu_table *tbl)
+{
+ struct device_node *node;
+ unsigned long *basep;
+ unsigned int *sizep;
+
+ node = (struct device_node *)phb->arch_data;
+
+ basep = (unsigned long *)get_property(node, "linux,tce-base", NULL);
+ sizep = (unsigned int *)get_property(node, "linux,tce-size", NULL);
+ if (basep == NULL || sizep == NULL) {
+ printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %s has "
+ "missing tce entries !\n", dn->full_name);
+ return;
+ }
+
+ tbl->it_base = (unsigned long)__va(*basep);
+ memset((void *)tbl->it_base, 0, *sizep);
+
+ tbl->it_busno = phb->bus->number;
+
+ /* Units of tce entries */
+ tbl->it_offset = phb->dma_window_base_cur >> PAGE_SHIFT;
+
+ /* Test if we are going over 2GB of DMA space */
+ if (phb->dma_window_base_cur + phb->dma_window_size > (1L << 31))
+ panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
+
+ phb->dma_window_base_cur += phb->dma_window_size;
+
+ /* Set the tce table size - measured in entries */
+ tbl->it_size = phb->dma_window_size >> PAGE_SHIFT;
+
+ tbl->it_index = 0;
+ tbl->it_blocksize = 16;
+ tbl->it_type = TCE_PCI;
+}
+
+/*
+ * iommu_table_setparms_lpar
+ *
+ * Function: On pSeries LPAR systems, return TCE table info, given a pci bus.
+ *
+ * ToDo: properly interpret the ibm,dma-window property. The definition is:
+ * logical-bus-number (1 word)
+ * phys-address (#address-cells words)
+ * size (#cell-size words)
+ *
+ * Currently we hard code these sizes (more or less).
+ */
+static void iommu_table_setparms_lpar(struct pci_controller *phb,
+ struct device_node *dn,
+ struct iommu_table *tbl,
+ unsigned int *dma_window)
+{
+ tbl->it_busno = dn->bussubno;
+
+ /* TODO: Parse field size properties properly. */
+ tbl->it_size = (((unsigned long)dma_window[4] << 32) |
+ (unsigned long)dma_window[5]) >> PAGE_SHIFT;
+ tbl->it_offset = (((unsigned long)dma_window[2] << 32) |
+ (unsigned long)dma_window[3]) >> PAGE_SHIFT;
+ tbl->it_base = 0;
+ tbl->it_index = dma_window[0];
+ tbl->it_blocksize = 16;
+ tbl->it_type = TCE_PCI;
+}
+
+static void iommu_bus_setup_pSeries(struct pci_bus *bus)
+{
+ struct device_node *dn, *pdn;
+ struct iommu_table *tbl;
+
+ DBG("iommu_bus_setup_pSeries, bus %p, bus->self %p\n", bus, bus->self);
+
+ /* For each (root) bus, we carve up the available DMA space in 256MB
+ * pieces. Since each piece is used by one (sub) bus/device, that would
+ * give a maximum of 7 devices per PHB. In most cases, this is plenty.
+ *
+ * The exception is on Python PHBs (pre-POWER4). Here we don't have EADS
+ * bridges below the PHB to allocate the sectioned tables to, so instead
+ * we allocate a 1GB table at the PHB level.
+ */
+
+ dn = pci_bus_to_OF_node(bus);
+
+ if (!bus->self) {
+ /* Root bus */
+ if (is_python(dn)) {
+ unsigned int *iohole;
+
+ DBG("Python root bus %s\n", bus->name);
+
+ iohole = (unsigned int *)get_property(dn, "io-hole", 0);
+
+ if (iohole) {
+ /* On first bus we need to leave room for the
+ * ISA address space. Just skip the first 256MB
+ * alltogether. This leaves 768MB for the window.
+ */
+ DBG("PHB has io-hole, reserving 256MB\n");
+ dn->phb->dma_window_size = 3 << 28;
+ dn->phb->dma_window_base_cur = 1 << 28;
+ } else {
+ /* 1GB window by default */
+ dn->phb->dma_window_size = 1 << 30;
+ dn->phb->dma_window_base_cur = 0;
+ }
+
+ tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
+
+ iommu_table_setparms(dn->phb, dn, tbl);
+ dn->iommu_table = iommu_init_table(tbl);
+ } else {
+ /* Do a 128MB table at root. This is used for the IDE
+ * controller on some SMP-mode POWER4 machines. It
+ * doesn't hurt to allocate it on other machines
+ * -- it'll just be unused since new tables are
+ * allocated on the EADS level.
+ *
+ * Allocate at offset 128MB to avoid having to deal
+ * with ISA holes; 128MB table for IDE is plenty.
+ */
+ dn->phb->dma_window_size = 1 << 27;
+ dn->phb->dma_window_base_cur = 1 << 27;
+
+ tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
+
+ iommu_table_setparms(dn->phb, dn, tbl);
+ dn->iommu_table = iommu_init_table(tbl);
+
+ /* All child buses have 256MB tables */
+ dn->phb->dma_window_size = 1 << 28;
+ }
+ } else {
+ pdn = pci_bus_to_OF_node(bus->parent);
+
+ if (!bus->parent->self && !is_python(pdn)) {
+ struct iommu_table *tbl;
+ /* First child and not python means this is the EADS
+ * level. Allocate new table for this slot with 256MB
+ * window.
+ */
+
+ tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
+
+ iommu_table_setparms(dn->phb, dn, tbl);
+
+ dn->iommu_table = iommu_init_table(tbl);
+ } else {
+ /* Lower than first child or under python, use parent table */
+ dn->iommu_table = pdn->iommu_table;
+ }
+ }
+}
+
+
+static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus)
+{
+ struct iommu_table *tbl;
+ struct device_node *dn, *pdn;
+ unsigned int *dma_window = NULL;
+
+ DBG("iommu_bus_setup_pSeriesLP, bus %p, bus->self %p\n", bus, bus->self);
+
+ dn = pci_bus_to_OF_node(bus);
+
+ /* Find nearest ibm,dma-window, walking up the device tree */
+ for (pdn = dn; pdn != NULL; pdn = pdn->parent) {
+ dma_window = (unsigned int *)get_property(pdn, "ibm,dma-window", NULL);
+ if (dma_window != NULL)
+ break;
+ }
+
+ if (dma_window == NULL) {
+ DBG("iommu_bus_setup_pSeriesLP: bus %s seems to have no ibm,dma-window property\n", dn->full_name);
+ return;
+ }
+
+ if (!pdn->iommu_table) {
+ /* Bussubno hasn't been copied yet.
+ * Do it now because iommu_table_setparms_lpar needs it.
+ */
+ pdn->bussubno = bus->number;
+
+ tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table),
+ GFP_KERNEL);
+
+ iommu_table_setparms_lpar(pdn->phb, pdn, tbl, dma_window);
+
+ pdn->iommu_table = iommu_init_table(tbl);
+ }
+
+ if (pdn != dn)
+ dn->iommu_table = pdn->iommu_table;
+}
+
+
+static void iommu_dev_setup_pSeries(struct pci_dev *dev)
+{
+ struct device_node *dn, *mydn;
+
+ DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, dev->pretty_name);
+ /* Now copy the iommu_table ptr from the bus device down to the
+ * pci device_node. This means get_iommu_table() won't need to search
+ * up the device tree to find it.
+ */
+ mydn = dn = pci_device_to_OF_node(dev);
+
+ while (dn && dn->iommu_table == NULL)
+ dn = dn->parent;
+
+ if (dn) {
+ mydn->iommu_table = dn->iommu_table;
+ } else {
+ DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, dev->pretty_name);
+ }
+}
+
+static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node)
+{
+ int err = NOTIFY_OK;
+ struct device_node *np = node;
+
+ switch (action) {
+ case PSERIES_RECONFIG_REMOVE:
+ if (np->iommu_table &&
+ get_property(np, "ibm,dma-window", NULL))
+ iommu_free_table(np);
+ break;
+ default:
+ err = NOTIFY_DONE;
+ break;
+ }
+ return err;
+}
+
+static struct notifier_block iommu_reconfig_nb = {
+ .notifier_call = iommu_reconfig_notifier,
+};
+
+static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev)
+{
+ struct device_node *pdn, *dn;
+ struct iommu_table *tbl;
+ int *dma_window = NULL;
+
+ DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, dev->pretty_name);
+
+ /* dev setup for LPAR is a little tricky, since the device tree might
+ * contain the dma-window properties per-device and not neccesarily
+ * for the bus. So we need to search upwards in the tree until we
+ * either hit a dma-window property, OR find a parent with a table
+ * already allocated.
+ */
+ dn = pci_device_to_OF_node(dev);
+
+ for (pdn = dn; pdn && !pdn->iommu_table; pdn = pdn->parent) {
+ dma_window = (unsigned int *)get_property(pdn, "ibm,dma-window", NULL);
+ if (dma_window)
+ break;
+ }
+
+ /* Check for parent == NULL so we don't try to setup the empty EADS
+ * slots on POWER4 machines.
+ */
+ if (dma_window == NULL || pdn->parent == NULL) {
+ /* Fall back to regular (non-LPAR) dev setup */
+ DBG("No dma window for device, falling back to regular setup\n");
+ iommu_dev_setup_pSeries(dev);
+ return;
+ } else {
+ DBG("Found DMA window, allocating table\n");
+ }
+
+ if (!pdn->iommu_table) {
+ /* iommu_table_setparms_lpar needs bussubno. */
+ pdn->bussubno = pdn->phb->bus->number;
+
+ tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table),
+ GFP_KERNEL);
+
+ iommu_table_setparms_lpar(pdn->phb, pdn, tbl, dma_window);
+
+ pdn->iommu_table = iommu_init_table(tbl);
+ }
+
+ if (pdn != dn)
+ dn->iommu_table = pdn->iommu_table;
+}
+
+static void iommu_bus_setup_null(struct pci_bus *b) { }
+static void iommu_dev_setup_null(struct pci_dev *d) { }
+
+/* These are called very early. */
+void iommu_init_early_pSeries(void)
+{
+ if (of_chosen && get_property(of_chosen, "linux,iommu-off", NULL)) {
+ /* Direct I/O, IOMMU off */
+ ppc_md.iommu_dev_setup = iommu_dev_setup_null;
+ ppc_md.iommu_bus_setup = iommu_bus_setup_null;
+ pci_direct_iommu_init();
+
+ return;
+ }
+
+ if (systemcfg->platform & PLATFORM_LPAR) {
+ if (cur_cpu_spec->firmware_features & FW_FEATURE_MULTITCE) {
+ ppc_md.tce_build = tce_buildmulti_pSeriesLP;
+ ppc_md.tce_free = tce_freemulti_pSeriesLP;
+ } else {
+ ppc_md.tce_build = tce_build_pSeriesLP;
+ ppc_md.tce_free = tce_free_pSeriesLP;
+ }
+ ppc_md.iommu_bus_setup = iommu_bus_setup_pSeriesLP;
+ ppc_md.iommu_dev_setup = iommu_dev_setup_pSeriesLP;
+ } else {
+ ppc_md.tce_build = tce_build_pSeries;
+ ppc_md.tce_free = tce_free_pSeries;
+ ppc_md.iommu_bus_setup = iommu_bus_setup_pSeries;
+ ppc_md.iommu_dev_setup = iommu_dev_setup_pSeries;
+ }
+
+
+ pSeries_reconfig_notifier_register(&iommu_reconfig_nb);
+
+ pci_iommu_init();
+}
+