ALSA: hda: digital pc-beep support hd-audio codecs
Added digital pc-beep support using linear tone generation for hd-codecs along
with initial support for several IDT codecs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index f3da621..6ee73ed 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -33,6 +33,7 @@
#include "hda_codec.h"
#include "hda_local.h"
#include "hda_patch.h"
+#include "hda_beep.h"
#define NUM_CONTROL_ALLOC 32
#define STAC_PWR_EVENT 0x20
@@ -164,6 +165,8 @@
unsigned int num_dmuxes;
hda_nid_t dig_in_nid;
hda_nid_t mono_nid;
+ hda_nid_t anabeep_nid;
+ hda_nid_t digbeep_nid;
/* pin widgets */
hda_nid_t *pin_nids;
@@ -690,6 +693,8 @@
static struct hda_verb stac927x_core_init[] = {
/* set master volume and direct control */
{ 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
+ /* enable analog pc beep path */
+ { 0x01, AC_VERB_SET_DIGI_CONVERT_2, 1 << 5},
{}
};
@@ -829,8 +834,11 @@
HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x1d, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_IDX("Capture Mux Volume", 0x1, 0x1b, 0x0, HDA_OUTPUT),
+ /* analog pc-beep replaced with digital beep support */
+ /*
HDA_CODEC_VOLUME("PC Beep Volume", 0x17, 0x2, HDA_INPUT),
HDA_CODEC_MUTE("PC Beep Switch", 0x17, 0x2, HDA_INPUT),
+ */
HDA_CODEC_MUTE("Analog Loopback 1", 0x17, 0x3, HDA_INPUT),
HDA_CODEC_MUTE("Analog Loopback 2", 0x17, 0x4, HDA_INPUT),
@@ -2609,6 +2617,34 @@
"Mono Mux", spec->mono_nid);
}
+/* create PC beep volume controls */
+static int stac92xx_auto_create_beep_ctls(struct hda_codec *codec,
+ hda_nid_t nid)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ u32 caps = query_amp_caps(codec, nid, HDA_OUTPUT);
+ int err;
+
+ /* check for mute support for the the amp */
+ if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
+ err = stac92xx_add_control(spec, STAC_CTL_WIDGET_MUTE,
+ "PC Beep Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT));
+ if (err < 0)
+ return err;
+ }
+
+ /* check to see if there is volume support for the amp */
+ if ((caps & AC_AMPCAP_NUM_STEPS) >> AC_AMPCAP_NUM_STEPS_SHIFT) {
+ err = stac92xx_add_control(spec, STAC_CTL_WIDGET_VOL,
+ "PC Beep Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT));
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
/* labels for dmic mux inputs */
static const char *stac92xx_dmic_labels[5] = {
"Analog Inputs", "Digital Mic 1", "Digital Mic 2",
@@ -2844,6 +2880,28 @@
if (err < 0)
return err;
+ /* setup analog beep controls */
+ if (spec->anabeep_nid > 0) {
+ err = stac92xx_auto_create_beep_ctls(codec,
+ spec->anabeep_nid);
+ if (err < 0)
+ return err;
+ }
+
+ /* setup digital beep controls and input device */
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
+ if (spec->digbeep_nid > 0) {
+ hda_nid_t nid = spec->digbeep_nid;
+
+ err = stac92xx_auto_create_beep_ctls(codec, nid);
+ if (err < 0)
+ return err;
+ err = snd_hda_attach_beep_device(codec, nid);
+ if (err < 0)
+ return err;
+ }
+#endif
+
if (hp_speaker_swap == 1) {
/* Restore the hp_outs and line_outs */
memcpy(spec->autocfg.hp_pins, spec->autocfg.line_out_pins,
@@ -3158,6 +3216,7 @@
kfree(spec->bios_pin_configs);
kfree(spec);
+ snd_hda_detach_beep_device(codec);
}
static void stac92xx_set_pinctl(struct hda_codec *codec, hda_nid_t nid,
@@ -3546,6 +3605,7 @@
spec->aloopback_mask = 0x01;
spec->aloopback_shift = 8;
+ spec->digbeep_nid = 0x1c;
spec->mux_nids = stac92hd73xx_mux_nids;
spec->adc_nids = stac92hd73xx_adc_nids;
spec->dmic_nids = stac92hd73xx_dmic_nids;
@@ -3680,6 +3740,7 @@
spec->gpio_dir = 0x01;
spec->gpio_data = 0x01;
+ spec->digbeep_nid = 0x26;
spec->mux_nids = stac92hd71bxx_mux_nids;
spec->adc_nids = stac92hd71bxx_adc_nids;
spec->dmic_nids = stac92hd71bxx_dmic_nids;
@@ -3854,6 +3915,7 @@
stac92xx_set_config_regs(codec);
}
+ spec->digbeep_nid = 0x23;
spec->adc_nids = stac927x_adc_nids;
spec->num_adcs = ARRAY_SIZE(stac927x_adc_nids);
spec->mux_nids = stac927x_mux_nids;
@@ -3974,6 +4036,7 @@
stac92xx_set_config_regs(codec);
}
+ spec->digbeep_nid = 0x23;
spec->adc_nids = stac9205_adc_nids;
spec->num_adcs = ARRAY_SIZE(stac9205_adc_nids);
spec->mux_nids = stac9205_mux_nids;