ata: libata: drop ata_msg_drv()
Callers are already protected by ata_dev_print_info(), so no need
to have an additional configuration parameter here.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 80ca94e..9c29479 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2354,7 +2354,6 @@ static void ata_dev_config_trusted(struct ata_device *dev)
static int ata_dev_config_lba(struct ata_device *dev)
{
- struct ata_port *ap = dev->link->ap;
const u16 *id = dev->id;
const char *lba_desc;
char ncq_desc[24];
@@ -2376,7 +2375,7 @@ static int ata_dev_config_lba(struct ata_device *dev)
ret = ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
/* print device info to dmesg */
- if (ata_msg_drv(ap) && ata_dev_print_info(dev))
+ if (ata_dev_print_info(dev))
ata_dev_info(dev,
"%llu sectors, multi %u: %s %s\n",
(unsigned long long)dev->n_sectors,
@@ -2387,7 +2386,6 @@ static int ata_dev_config_lba(struct ata_device *dev)
static void ata_dev_config_chs(struct ata_device *dev)
{
- struct ata_port *ap = dev->link->ap;
const u16 *id = dev->id;
if (ata_id_current_chs_valid(id)) {
@@ -2403,7 +2401,7 @@ static void ata_dev_config_chs(struct ata_device *dev)
}
/* print device info to dmesg */
- if (ata_msg_drv(ap) && ata_dev_print_info(dev))
+ if (ata_dev_print_info(dev))
ata_dev_info(dev,
"%llu sectors, multi %u, CHS %u/%u/%u\n",
(unsigned long long)dev->n_sectors,
@@ -2644,7 +2642,7 @@ int ata_dev_configure(struct ata_device *dev)
}
/* print device info to dmesg */
- if (ata_msg_drv(ap) && print_info)
+ if (print_info)
ata_dev_info(dev, "%s: %s, %s, max %s\n",
revbuf, modelbuf, fwrevbuf,
ata_mode_string(xfer_mask));
@@ -2664,7 +2662,7 @@ int ata_dev_configure(struct ata_device *dev)
ata_dev_config_cpr(dev);
dev->cdb_len = 32;
- if (ata_msg_drv(ap) && print_info)
+ if (print_info)
ata_dev_print_features(dev);
}
@@ -2721,7 +2719,7 @@ int ata_dev_configure(struct ata_device *dev)
}
/* print device info to dmesg */
- if (ata_msg_drv(ap) && print_info)
+ if (print_info)
ata_dev_info(dev,
"ATAPI: %s, %s, max %s%s%s%s\n",
modelbuf, fwrevbuf,
@@ -2738,7 +2736,7 @@ int ata_dev_configure(struct ata_device *dev)
/* Limit PATA drive on SATA cable bridge transfers to udma5,
200 sectors */
if (ata_dev_knobble(dev)) {
- if (ata_msg_drv(ap) && print_info)
+ if (print_info)
ata_dev_info(dev, "applying bridge limits\n");
dev->udma_mask &= ATA_UDMA5;
dev->max_sectors = ATA_MAX_SECTORS;
@@ -5331,11 +5329,6 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
ap->host = host;
ap->dev = host->dev;
-#if defined(ATA_VERBOSE_DEBUG)
- /* turn on all debugging levels */
- ap->msg_enable = 0x0001;
-#endif
-
mutex_init(&ap->scsi_scan_mutex);
INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);