pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device
pcmcia_enable_device() now replaces pcmcia_request_configuration().
Instead of config_req_t, all necessary flags are either passed as
a parameter to pcmcia_enable_device(), or (in rare circumstances)
set in struct pcmcia_device -> flags.
With the last remaining user of include/pcmcia/cs.h gone, remove
all references.
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth)
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 4b670b3..8abce76 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -87,7 +87,6 @@
#include <linux/bitops.h>
#include <linux/mii.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
@@ -280,7 +279,7 @@
spin_lock_init(&lp->window_lock);
link->resource[0]->end = 32;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
- link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->config_flags |= CONF_ENABLE_IRQ;
link->config_index = 1;
dev->netdev_ops = &el3_netdev_ops;
@@ -351,7 +350,7 @@
if (ret)
goto failed;
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 6549e2c..34195c4 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -41,7 +41,6 @@
#include <linux/bitops.h>
#include <linux/jiffies.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
@@ -216,7 +215,7 @@
link->resource[0]->end = 16;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
- link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->config_flags |= CONF_ENABLE_IRQ;
link->config_index = 1;
dev->netdev_ops = &el3_netdev_ops;
@@ -293,7 +292,7 @@
if (ret)
goto failed;
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 2c273ce..f361d28 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -39,7 +39,6 @@
#include <linux/mii.h>
#include "../8390.h"
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
@@ -166,7 +165,7 @@
info = PRIV(dev);
info->p_dev = link;
link->priv = dev;
- link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->config_flags |= CONF_ENABLE_IRQ;
dev->netdev_ops = &axnet_netdev_ops;
@@ -332,11 +331,12 @@
if (!link->irq)
goto failed;
-
+
+ link->config_flags |= CONF_ENABLE_IRQ;
if (resource_size(link->resource[1]) == 8)
- link->conf.Attributes |= CONF_ENABLE_SPKR;
+ link->config_flags |= CONF_ENABLE_SPKR;
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index a58eafe..039731b 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -43,7 +43,6 @@
#include <linux/arcdevice.h>
#include <linux/com20020.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
@@ -160,7 +159,7 @@
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
p_dev->resource[0]->end = 16;
- p_dev->conf.Attributes = CONF_ENABLE_IRQ;
+ p_dev->config_flags |= CONF_ENABLE_IRQ;
info->dev = dev;
p_dev->priv = info;
@@ -281,7 +280,7 @@
dev->irq = link->irq;
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 23f5333..f6865ad 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -49,7 +49,6 @@
#include <linux/ioport.h>
#include <linux/crc32.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
@@ -252,7 +251,7 @@
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
/* General socket configuration */
- link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->config_flags |= CONF_ENABLE_IRQ;
dev->netdev_ops = &fjn_netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
@@ -431,7 +430,7 @@
ret = pcmcia_request_irq(link, fjn_interrupt);
if (ret)
goto failed;
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index feedeeb..b298a3d 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -57,7 +57,6 @@
#include <linux/trdevice.h>
#include <linux/ibmtr.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
@@ -152,7 +151,7 @@
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[0]->end = 4;
- link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->config_flags |= CONF_ENABLE_IRQ;
link->config_regs = PRESENT_OPTION;
info->dev = dev;
@@ -269,7 +268,7 @@
resource_size(link->resource[3]));
ti->sram_phys = link->resource[3]->start;
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 98c4a69..51bf76d 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -146,7 +146,6 @@
#include <linux/ioport.h>
#include <linux/bitops.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
@@ -460,7 +459,7 @@
spin_lock_init(&lp->bank_lock);
link->resource[0]->end = 32;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
- link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->config_flags |= CONF_ENABLE_IRQ;
link->config_index = 1;
link->config_regs = PRESENT_OPTION;
@@ -649,7 +648,7 @@
ret = pcmcia_request_exclusive_irq(link, mace_interrupt);
if (ret)
goto failed;
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 68c4675..4a3b6a4 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -42,7 +42,6 @@
#include <linux/mii.h>
#include "../8390.h"
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
@@ -260,7 +259,7 @@
info->p_dev = link;
link->priv = dev;
- link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->config_flags |= CONF_ENABLE_IRQ;
dev->netdev_ops = &pcnet_netdev_ops;
@@ -560,13 +559,13 @@
return NULL;
if (resource_size(link->resource[1]) == 8)
- link->conf.Attributes |= CONF_ENABLE_SPKR;
+ link->config_flags |= CONF_ENABLE_SPKR;
if ((link->manf_id == MANFID_IBM) &&
(link->card_id == PRODID_IBM_HOME_AND_AWAY))
link->config_index |= 0x10;
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
return NULL;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 59f5034..8c16ba6 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -44,7 +44,6 @@
#include <linux/jiffies.h>
#include <linux/firmware.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
@@ -326,7 +325,7 @@
spin_lock_init(&smc->lock);
link->resource[0]->end = 16;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
- link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->config_flags |= CONF_ENABLE_IRQ;
/* The SMC91c92-specific entries in the device structure. */
dev->netdev_ops = &smc_netdev_ops;
@@ -444,7 +443,7 @@
unsigned int offset;
int i;
- link->conf.Attributes |= CONF_ENABLE_SPKR;
+ link->config_flags |= CONF_ENABLE_SPKR;
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[1]->end = 8;
@@ -637,7 +636,7 @@
static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
int i, j;
- link->conf.Attributes |= CONF_ENABLE_SPKR;
+ link->config_flags |= CONF_ENABLE_SPKR;
link->resource[0]->end = 64;
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[1]->end = 8;
@@ -862,7 +861,7 @@
i = pcmcia_request_irq(link, smc_interrupt);
if (i)
goto config_failed;
- i = pcmcia_request_configuration(link, &link->conf);
+ i = pcmcia_enable_device(link);
if (i)
goto config_failed;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 1c8ebf2d..7a4a99b 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -82,7 +82,6 @@
#include <linux/bitops.h>
#include <linux/mii.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
@@ -529,7 +528,7 @@
link->priv = dev;
/* General socket configuration */
- link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->config_flags |= CONF_ENABLE_IRQ;
link->config_index = 1;
/* Fill in card specific entries */
@@ -811,9 +810,6 @@
if (local->modem) {
int pass;
- if (do_sound)
- link->conf.Attributes |= CONF_ENABLE_SPKR;
-
link->resource[1]->end = 8;
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
if (local->dingo) {
@@ -863,7 +859,11 @@
* This actually configures the PCMCIA socket -- setting up
* the I/O windows and the interrupt mapping.
*/
- if ((err=pcmcia_request_configuration(link, &link->conf)))
+ link->config_flags |= CONF_ENABLE_IRQ;
+ if (do_sound)
+ link->config_flags |= CONF_ENABLE_SPKR;
+
+ if ((err = pcmcia_enable_device(link)))
goto config_error;
if (local->dingo) {
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 40f9ed7..5939d0c 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -32,7 +32,6 @@
#include <linux/timer.h>
#include <linux/netdevice.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
@@ -96,15 +95,6 @@
dev_dbg(&p_dev->dev, "airo_attach()\n");
- /*
- General socket configuration defaults can go here. In this
- client, we assume very little, and rely on the CIS for almost
- everything. In most clients, many details (i.e., number, sizes,
- and attributes of IO windows) are fixed by the nature of the
- device, and can be hard-wired here.
- */
- p_dev->conf.Attributes = 0;
-
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local) {
@@ -158,7 +148,7 @@
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO)
- p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->config_flags |= CONF_ENABLE_SPKR;
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
@@ -167,7 +157,7 @@
else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->config_flags |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
@@ -229,7 +219,7 @@
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
((local_info_t *)link->priv)->eth_dev =
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 8b75158..080266e 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -42,7 +42,6 @@
#include <linux/moduleparam.h>
#include <linux/device.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
@@ -106,15 +105,6 @@
dev_dbg(&p_dev->dev, "atmel_attach()\n");
- /*
- General socket configuration defaults can go here. In this
- client, we assume very little, and rely on the CIS for almost
- everything. In most clients, many details (i.e., number, sizes,
- and attributes of IO windows) are fixed by the nature of the
- device, and can be hard-wired here.
- */
- p_dev->conf.Attributes = 0;
-
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local) {
@@ -175,7 +165,7 @@
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO)
- p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->config_flags |= CONF_ENABLE_SPKR;
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
@@ -184,7 +174,7 @@
else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->config_flags |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
@@ -242,7 +232,7 @@
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 138b26f..61abab1 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -26,7 +26,6 @@
#include <linux/ssb/ssb.h>
#include <linux/slab.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
@@ -72,7 +71,7 @@
err = -ENODEV;
- dev->conf.Attributes = CONF_ENABLE_IRQ;
+ dev->config_flags |= CONF_ENABLE_IRQ;
dev->resource[2]->flags |= WIN_ENABLE | WIN_DATA_WIDTH_16 |
WIN_USE_WAIT;
@@ -89,7 +88,7 @@
if (!dev->irq)
goto err_disable;
- res = pcmcia_request_configuration(dev, &dev->conf);
+ res = pcmcia_enable_device(dev);
if (res != 0)
goto err_disable;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 5704d3f..5b0b582 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -12,7 +12,6 @@
#include <linux/wireless.h>
#include <net/iw_handler.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
@@ -484,7 +483,7 @@
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO)
- p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->config_flags |= CONF_ENABLE_SPKR;
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
@@ -510,7 +509,7 @@
p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->config_flags |= CONF_ENABLE_IRQ;
/* IO window settings */
PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
@@ -590,7 +589,7 @@
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed_unlock;
@@ -605,8 +604,7 @@
if (link->vpp)
printk(", Vpp %d.%d", link->vpp / 10,
link->vpp % 10);
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq);
+ printk(", irq %d", link->irq);
if (link->resource[0])
printk(" & %pR", link->resource[0]);
if (link->resource[1])
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 814b7fa..6020c19 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -28,7 +28,6 @@
#include <linux/firmware.h>
#include <linux/netdevice.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
@@ -806,7 +805,7 @@
p_dev->resource[0]->end = cfg->io.win[0].len;
/* Do we need to allocate an interrupt? */
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->config_flags |= CONF_ENABLE_IRQ;
/* IO window settings */
if (cfg->io.nwin != 1) {
@@ -835,14 +834,11 @@
card->p_dev = p_dev;
p_dev->priv = card;
- p_dev->conf.Attributes = 0;
-
if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
lbs_pr_err("error in pcmcia_loop_config\n");
goto out1;
}
-
/*
* Allocate an interrupt line. Note that this does not assign
* a handler to the interrupt, unless the 'Handler' member of
@@ -865,9 +861,9 @@
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
+ ret = pcmcia_enable_device(p_dev);
if (ret) {
- lbs_pr_err("error in pcmcia_request_configuration\n");
+ lbs_pr_err("error in pcmcia_enable_device\n");
goto out2;
}
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 1147d6b..00316a1 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -17,7 +17,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
@@ -117,13 +116,6 @@
card->p_dev = link;
link->priv = priv;
- /* General socket configuration defaults can go here. In this
- * client, we assume very little, and rely on the CIS for
- * almost everything. In most clients, many details (i.e.,
- * number, sizes, and attributes of IO windows) are fixed by
- * the nature of the device, and can be hard-wired here. */
- link->conf.Attributes = 0;
-
return orinoco_cs_config(link);
} /* orinoco_cs_attach */
@@ -187,7 +179,7 @@
dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->config_flags |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
@@ -266,7 +258,7 @@
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 20b08ab..ca2c6c0 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -25,7 +25,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
@@ -179,13 +178,6 @@
card->p_dev = link;
link->priv = priv;
- /* General socket configuration defaults can go here. In this
- * client, we assume very little, and rely on the CIS for
- * almost everything. In most clients, many details (i.e.,
- * number, sizes, and attributes of IO windows) are fixed by
- * the nature of the device, and can be hard-wired here. */
- link->conf.Attributes = 0;
-
return spectrum_cs_config(link);
} /* spectrum_cs_attach */
@@ -249,7 +241,7 @@
dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ p_dev->config_flags |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
@@ -329,7 +321,7 @@
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 7fb66cc..1457f34 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -46,7 +46,6 @@
#include <linux/ethtool.h>
#include <linux/ieee80211.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
@@ -318,7 +317,7 @@
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
/* General socket configuration */
- p_dev->conf.Attributes = CONF_ENABLE_IRQ;
+ p_dev->config_flags |= CONF_ENABLE_IRQ;
p_dev->config_index = 1;
p_dev->priv = dev;
@@ -413,7 +412,7 @@
/* This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping.
*/
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 3947cf8e6..101b6ff 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -48,7 +48,6 @@
#include <net/iw_handler.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
@@ -1888,7 +1887,7 @@
p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8;
/* General socket configuration */
- p_dev->conf.Attributes = CONF_ENABLE_IRQ;
+ p_dev->config_flags = CONF_ENABLE_IRQ;
p_dev->config_index = 1;
dev = alloc_etherdev(sizeof(struct wl3501_card));
@@ -1954,7 +1953,7 @@
/* This actually configures the PCMCIA socket -- setting up the I/O
* windows and the interrupt mapping. */
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;