DSA: Convert repeated msleep calls to timeouts
Convert DSA msleep calls to timeout/usleep_range calls
as reported by checkpatch.pl.
Signed-off-by: Barry Grussling <barry@grussling.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index 637373c..8548f8d 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -8,6 +8,8 @@
* (at your option) any later version.
*/
+#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdevice.h>
@@ -66,6 +68,7 @@
{
int i;
int ret;
+ unsigned long timeout;
/* Set all ports to the disabled state. */
for (i = 0; i < 6; i++) {
@@ -74,20 +77,21 @@
}
/* Wait for transmit queues to drain. */
- msleep(2);
+ usleep_range(2000, 4000);
/* Reset the switch. */
REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
/* Wait up to one second for reset to complete. */
- for (i = 0; i < 1000; i++) {
+ timeout = jiffies + 1 * HZ;
+ while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, 0x00);
if ((ret & 0x8000) == 0x0000)
break;
- msleep(1);
+ usleep_range(1000, 2000);
}
- if (i == 1000)
+ if (time_after(jiffies, timeout))
return -ETIMEDOUT;
return 0;
diff --git a/drivers/net/dsa/mv88e6123_61_65.c b/drivers/net/dsa/mv88e6123_61_65.c
index a644fc9..41ee5b6 100644
--- a/drivers/net/dsa/mv88e6123_61_65.c
+++ b/drivers/net/dsa/mv88e6123_61_65.c
@@ -8,6 +8,8 @@
* (at your option) any later version.
*/
+#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdevice.h>
@@ -50,6 +52,7 @@
{
int i;
int ret;
+ unsigned long timeout;
/* Set all ports to the disabled state. */
for (i = 0; i < 8; i++) {
@@ -58,20 +61,21 @@
}
/* Wait for transmit queues to drain. */
- msleep(2);
+ usleep_range(2000, 4000);
/* Reset the switch. */
REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
/* Wait up to one second for reset to complete. */
- for (i = 0; i < 1000; i++) {
+ timeout = jiffies + 1 * HZ;
+ while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, 0x00);
if ((ret & 0xc800) == 0xc800)
break;
- msleep(1);
+ usleep_range(1000, 2000);
}
- if (i == 1000)
+ if (time_after(jiffies, timeout))
return -ETIMEDOUT;
return 0;
diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
index b613818..dadfafb 100644
--- a/drivers/net/dsa/mv88e6131.c
+++ b/drivers/net/dsa/mv88e6131.c
@@ -8,6 +8,8 @@
* (at your option) any later version.
*/
+#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdevice.h>
@@ -42,6 +44,7 @@
{
int i;
int ret;
+ unsigned long timeout;
/* Set all ports to the disabled state. */
for (i = 0; i < 11; i++) {
@@ -50,20 +53,21 @@
}
/* Wait for transmit queues to drain. */
- msleep(2);
+ usleep_range(2000, 4000);
/* Reset the switch. */
REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
/* Wait up to one second for reset to complete. */
- for (i = 0; i < 1000; i++) {
+ timeout = jiffies + 1 * HZ;
+ while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, 0x00);
if ((ret & 0xc800) == 0xc800)
break;
- msleep(1);
+ usleep_range(1000, 2000);
}
- if (i == 1000)
+ if (time_after(jiffies, timeout))
return -ETIMEDOUT;
return 0;
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index d436668..afe7d80 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -8,6 +8,8 @@
* (at your option) any later version.
*/
+#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdevice.h>
@@ -196,14 +198,15 @@
static int mv88e6xxx_ppu_disable(struct dsa_switch *ds)
{
int ret;
- int i;
+ unsigned long timeout;
ret = REG_READ(REG_GLOBAL, 0x04);
REG_WRITE(REG_GLOBAL, 0x04, ret & ~0x4000);
- for (i = 0; i < 1000; i++) {
+ timeout = jiffies + 1 * HZ;
+ while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, 0x00);
- msleep(1);
+ usleep_range(1000, 2000);
if ((ret & 0xc000) != 0xc000)
return 0;
}
@@ -214,14 +217,15 @@
static int mv88e6xxx_ppu_enable(struct dsa_switch *ds)
{
int ret;
- int i;
+ unsigned long timeout;
ret = REG_READ(REG_GLOBAL, 0x04);
REG_WRITE(REG_GLOBAL, 0x04, ret | 0x4000);
- for (i = 0; i < 1000; i++) {
+ timeout = jiffies + 1 * HZ;
+ while (time_before(jiffies, timeout)) {
ret = REG_READ(REG_GLOBAL, 0x00);
- msleep(1);
+ usleep_range(1000, 2000);
if ((ret & 0xc000) == 0xc000)
return 0;
}