mtd: gpio-nand: Ability to use driver for configurations without RDY-pin
In some configurations of "gpio-nand" RDY-pin may be not connected.
This patch allow to use driver for these configurations. In this case
we are assume that device always ready.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index bc73bc5..0b3c815 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -134,7 +134,11 @@
static int gpio_nand_devready(struct mtd_info *mtd)
{
struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
- return gpio_get_value(gpiomtd->plat.gpio_rdy);
+
+ if (gpio_is_valid(gpiomtd->plat.gpio_rdy))
+ return gpio_get_value(gpiomtd->plat.gpio_rdy);
+
+ return 1;
}
#ifdef CONFIG_OF
@@ -252,7 +256,8 @@
gpio_free(gpiomtd->plat.gpio_nce);
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
gpio_free(gpiomtd->plat.gpio_nwp);
- gpio_free(gpiomtd->plat.gpio_rdy);
+ if (gpio_is_valid(gpiomtd->plat.gpio_rdy))
+ gpio_free(gpiomtd->plat.gpio_rdy);
kfree(gpiomtd);
@@ -336,10 +341,12 @@
if (ret)
goto err_cle;
gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
- ret = gpio_request(gpiomtd->plat.gpio_rdy, "NAND RDY");
- if (ret)
- goto err_rdy;
- gpio_direction_input(gpiomtd->plat.gpio_rdy);
+ if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) {
+ ret = gpio_request(gpiomtd->plat.gpio_rdy, "NAND RDY");
+ if (ret)
+ goto err_rdy;
+ gpio_direction_input(gpiomtd->plat.gpio_rdy);
+ }
this->IO_ADDR_W = this->IO_ADDR_R;
@@ -386,7 +393,8 @@
err_wp:
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
- gpio_free(gpiomtd->plat.gpio_rdy);
+ if (gpio_is_valid(gpiomtd->plat.gpio_rdy))
+ gpio_free(gpiomtd->plat.gpio_rdy);
err_rdy:
gpio_free(gpiomtd->plat.gpio_cle);
err_cle: