gpio: samsung: add devicetree init for s3c24xx arches
Until now the EXYNOS-SoC was the only Samsung-SoC supporting the GPIOs
via the device tree. This patch implements dt-support for the
s3c24xx arches.
The controllers contain only 3 cells, as the underlying gpio controller
does not support controlling the drive strength on a gpio level.
Tested with the gpio-keys driver on a s3c2416 based machine.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
[kgene.kim@samsung.com: fixed build error]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index ba126cc..f4814a8 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -938,6 +938,67 @@
s3c_gpiolib_track(chip);
}
+#if defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF)
+static int s3c24xx_gpio_xlate(struct gpio_chip *gc,
+ const struct of_phandle_args *gpiospec, u32 *flags)
+{
+ unsigned int pin;
+
+ if (WARN_ON(gc->of_gpio_n_cells < 3))
+ return -EINVAL;
+
+ if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
+ return -EINVAL;
+
+ if (gpiospec->args[0] > gc->ngpio)
+ return -EINVAL;
+
+ pin = gc->base + gpiospec->args[0];
+
+ if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))
+ pr_warn("gpio_xlate: failed to set pin function\n");
+ if (s3c_gpio_setpull(pin, gpiospec->args[2] & 0xffff))
+ pr_warn("gpio_xlate: failed to set pin pull up/down\n");
+
+ if (flags)
+ *flags = gpiospec->args[2] >> 16;
+
+ return gpiospec->args[0];
+}
+
+static const struct of_device_id s3c24xx_gpio_dt_match[] __initdata = {
+ { .compatible = "samsung,s3c24xx-gpio", },
+ {}
+};
+
+static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
+{
+ struct gpio_chip *gc = &chip->chip;
+ u64 address;
+
+ if (!of_have_populated_dt())
+ return;
+
+ address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
+ gc->of_node = of_find_matching_node_by_address(NULL,
+ s3c24xx_gpio_dt_match, address);
+ if (!gc->of_node) {
+ pr_info("gpio: device tree node not found for gpio controller"
+ " with base address %08llx\n", address);
+ return;
+ }
+ gc->of_gpio_n_cells = 3;
+ gc->of_xlate = s3c24xx_gpio_xlate;
+}
+#else
+static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
+{
+ return;
+}
+#endif /* defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF) */
+
static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
int nr_chips, void __iomem *base)
{
@@ -962,6 +1023,8 @@
gc->direction_output = samsung_gpiolib_2bit_output;
samsung_gpiolib_add(chip);
+
+ s3c24xx_gpiolib_attach_ofnode(chip, S3C24XX_PA_GPIO, i * 0x10);
}
}