diff --git a/Documentation/hwmon/lm95245 b/Documentation/hwmon/lm95245
index 77eaf28..d755901 100644
--- a/Documentation/hwmon/lm95245
+++ b/Documentation/hwmon/lm95245
@@ -2,10 +2,14 @@
 ==================
 
 Supported chips:
-  * National Semiconductor LM95245
+  * TI LM95235
+    Addresses scanned: I2C 0x18, 0x29, 0x4c
+    Datasheet: Publicly available at the TI website
+               http://www.ti.com/lit/ds/symlink/lm95235.pdf
+  * TI / National Semiconductor LM95245
     Addresses scanned: I2C 0x18, 0x19, 0x29, 0x4c, 0x4d
-    Datasheet: Publicly available at the National Semiconductor website
-               http://www.national.com/mpf/LM/LM95245.html
+    Datasheet: Publicly available at the TI website
+               http://www.ti.com/lit/ds/symlink/lm95245.pdf
 
 
 Author: Alexander Stein <alexander.stein@systec-electronic.com>
@@ -13,10 +17,10 @@
 Description
 -----------
 
-The LM95245 is an 11-bit digital temperature sensor with a 2-wire System
+LM95235 and LM95245 are 11-bit digital temperature sensors with a 2-wire System
 Management Bus (SMBus) interface and TruTherm technology that can monitor
 the temperature of a remote diode as well as its own temperature.
-The LM95245 can be used to very accurately monitor the temperature of
+The chips can be used to very accurately monitor the temperature of
 external devices such as microprocessors.
 
 All temperature values are given in millidegrees Celsius. Local temperature
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index fcca19b..085f5a8 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1048,10 +1048,11 @@
 	  will be called lm95241.
 
 config SENSORS_LM95245
-	tristate "National Semiconductor LM95245 sensor chip"
+	tristate "National Semiconductor LM95245 and compatibles"
 	depends on I2C
 	help
-	  If you say yes here you get support for LM95245 sensor chip.
+	  If you say yes here you get support for LM95235 and LM95245
+	  temperature sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm95245.
diff --git a/drivers/hwmon/lm95245.c b/drivers/hwmon/lm95245.c
index 0ae0dfd..e7aef45 100644
--- a/drivers/hwmon/lm95245.c
+++ b/drivers/hwmon/lm95245.c
@@ -1,10 +1,8 @@
 /*
  * Copyright (C) 2011 Alexander Stein <alexander.stein@systec-electronic.com>
  *
- * The LM95245 is a sensor chip made by National Semiconductors.
+ * The LM95245 is a sensor chip made by TI / National Semiconductor.
  * It reports up to two temperatures (its own plus an external one).
- * Complete datasheet can be obtained from National's website at:
- *   http://www.national.com/ds.cgi/LM/LM95245.pdf
  *
  * This driver is based on lm95241.c
  *
@@ -34,8 +32,6 @@
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
 
-#define DEVNAME "lm95245"
-
 static const unsigned short normal_i2c[] = {
 	0x18, 0x19, 0x29, 0x4c, 0x4d, I2C_CLIENT_END };
 
@@ -98,7 +94,8 @@
 #define STATUS1_LOC		0x01
 
 #define MANUFACTURER_ID		0x01
-#define DEFAULT_REVISION	0xB3
+#define LM95235_REVISION	0xB1
+#define LM95245_REVISION	0xB3
 
 static const u8 lm95245_reg_address[] = {
 	LM95245_REG_R_LOCAL_TEMPH_S,
@@ -427,17 +424,32 @@
 			  struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = new_client->adapter;
+	int address = new_client->addr;
+	const char *name;
+	int rev, id;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	if (i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID)
-			!= MANUFACTURER_ID
-		|| i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID)
-			!= DEFAULT_REVISION)
+	id = i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID);
+	if (id != MANUFACTURER_ID)
 		return -ENODEV;
 
-	strlcpy(info->type, DEVNAME, I2C_NAME_SIZE);
+	rev = i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID);
+	switch (rev) {
+	case LM95235_REVISION:
+		if (address != 0x18 && address != 0x29 && address != 0x4c)
+			return -ENODEV;
+		name = "lm95235";
+		break;
+	case LM95245_REVISION:
+		name = "lm95245";
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	strlcpy(info->type, name, I2C_NAME_SIZE);
 	return 0;
 }
 
@@ -484,7 +496,8 @@
 
 /* Driver data (common to all clients) */
 static const struct i2c_device_id lm95245_id[] = {
-	{ DEVNAME, 0 },
+	{ "lm95235", 0 },
+	{ "lm95245", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm95245_id);
@@ -492,7 +505,7 @@
 static struct i2c_driver lm95245_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
-		.name	= DEVNAME,
+		.name	= "lm95245",
 	},
 	.probe		= lm95245_probe,
 	.id_table	= lm95245_id,
@@ -503,5 +516,5 @@
 module_i2c_driver(lm95245_driver);
 
 MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>");
-MODULE_DESCRIPTION("LM95245 sensor driver");
+MODULE_DESCRIPTION("LM95235/LM95245 sensor driver");
 MODULE_LICENSE("GPL");