drm/i915/perf: per-gen timebase for checking sample freq
An oa_exponent_to_ns() utility and per-gen timebase constants where
recently removed when updating the tail pointer race condition WA, and
this restores those so we can update the _PROP_OA_EXPONENT validation
done in read_properties_unlocked() to not assume we have a 12.5MHz
timebase as we did for Haswell.
Accordingly the oa_sample_rate_hard_limit value that's referenced by
proc_dointvec_minmax defining the absolute limit for the OA sampling
frequency is now initialized to (timestamp_frequency / 2) instead of the
6.25MHz constant for Haswell.
v2:
Specify frequency of 19.2MHz for BXT (Ville)
Initialize oa_sample_rate_hard_limit per-gen too (Lionel)
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index a6af4d7..4d79698 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -288,10 +288,12 @@ static u32 i915_perf_stream_paranoid = true;
/* For sysctl proc_dointvec_minmax of i915_oa_max_sample_rate
*
- * 160ns is the smallest sampling period we can theoretically program the OA
- * unit with on Haswell, corresponding to 6.25MHz.
+ * The highest sampling frequency we can theoretically program the OA unit
+ * with is always half the timestamp frequency: E.g. 6.25Mhz for Haswell.
+ *
+ * Initialized just before we register the sysctl parameter.
*/
-static int oa_sample_rate_hard_limit = 6250000;
+static int oa_sample_rate_hard_limit;
/* Theoretically we can program the OA unit to sample every 160ns but don't
* allow that by default unless root...
@@ -2642,6 +2644,12 @@ i915_perf_open_ioctl_locked(struct drm_i915_private *dev_priv,
return ret;
}
+static u64 oa_exponent_to_ns(struct drm_i915_private *dev_priv, int exponent)
+{
+ return div_u64(1000000000ULL * (2ULL << exponent),
+ dev_priv->perf.oa.timestamp_frequency);
+}
+
/**
* read_properties_unlocked - validate + copy userspace stream open properties
* @dev_priv: i915 device instance
@@ -2738,16 +2746,13 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv,
}
/* Theoretically we can program the OA unit to sample
- * every 160ns but don't allow that by default unless
- * root.
- *
- * On Haswell the period is derived from the exponent
- * as:
- *
- * period = 80ns * 2^(exponent + 1)
+ * e.g. every 160ns for HSW, 167ns for BDW/SKL or 104ns
+ * for BXT. We don't allow such high sampling
+ * frequencies by default unless root.
*/
+
BUILD_BUG_ON(sizeof(oa_period) != 8);
- oa_period = 80ull * (2ull << value);
+ oa_period = oa_exponent_to_ns(dev_priv, value);
/* This check is primarily to ensure that oa_period <=
* UINT32_MAX (before passing to do_div which only
@@ -3003,6 +3008,8 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
dev_priv->perf.oa.ops.oa_hw_tail_read =
gen7_oa_hw_tail_read;
+ dev_priv->perf.oa.timestamp_frequency = 12500000;
+
dev_priv->perf.oa.oa_formats = hsw_oa_formats;
dev_priv->perf.oa.n_builtin_sets =
@@ -3018,6 +3025,9 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
if (IS_GEN8(dev_priv)) {
dev_priv->perf.oa.ctx_oactxctrl_offset = 0x120;
dev_priv->perf.oa.ctx_flexeu0_offset = 0x2ce;
+
+ dev_priv->perf.oa.timestamp_frequency = 12500000;
+
dev_priv->perf.oa.gen8_valid_ctx_bit = (1<<25);
if (IS_BROADWELL(dev_priv)) {
@@ -3034,6 +3044,9 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
} else if (IS_GEN9(dev_priv)) {
dev_priv->perf.oa.ctx_oactxctrl_offset = 0x128;
dev_priv->perf.oa.ctx_flexeu0_offset = 0x3de;
+
+ dev_priv->perf.oa.timestamp_frequency = 12000000;
+
dev_priv->perf.oa.gen8_valid_ctx_bit = (1<<16);
if (IS_SKL_GT2(dev_priv)) {
@@ -3052,6 +3065,8 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
dev_priv->perf.oa.ops.select_metric_set =
i915_oa_select_metric_set_sklgt4;
} else if (IS_BROXTON(dev_priv)) {
+ dev_priv->perf.oa.timestamp_frequency = 19200000;
+
dev_priv->perf.oa.n_builtin_sets =
i915_oa_n_builtin_metric_sets_bxt;
dev_priv->perf.oa.ops.select_metric_set =
@@ -3086,6 +3101,8 @@ void i915_perf_init(struct drm_i915_private *dev_priv)
spin_lock_init(&dev_priv->perf.hook_lock);
spin_lock_init(&dev_priv->perf.oa.oa_buffer.ptr_lock);
+ oa_sample_rate_hard_limit =
+ dev_priv->perf.oa.timestamp_frequency / 2;
dev_priv->perf.sysctl_header = register_sysctl_table(dev_root);
dev_priv->perf.initialized = true;