powerpc: Merge enough to start building in arch/powerpc.
This creates the directory structure under arch/powerpc and a bunch
of Kconfig files. It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.
For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes
to files in those directories and files outside arch/powerpc.
The boot directory is still not merged. That's going to be interesting.
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
new file mode 100644
index 0000000..af9ca0e
--- /dev/null
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -0,0 +1,237 @@
+/*
+ * Modifications by Kumar Gala (kumar.gala@freescale.com) to support
+ * E500 Book E processors.
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This file contains the routines for initializing the MMU
+ * on the 4xx series of chips.
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+
+extern void loadcam_entry(unsigned int index);
+unsigned int tlbcam_index;
+unsigned int num_tlbcam_entries;
+static unsigned long __cam0, __cam1, __cam2;
+extern unsigned long total_lowmem;
+extern unsigned long __max_low_memory;
+#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
+
+#define NUM_TLBCAMS (16)
+
+struct tlbcam {
+ u32 MAS0;
+ u32 MAS1;
+ u32 MAS2;
+ u32 MAS3;
+ u32 MAS7;
+} TLBCAM[NUM_TLBCAMS];
+
+struct tlbcamrange {
+ unsigned long start;
+ unsigned long limit;
+ phys_addr_t phys;
+} tlbcam_addrs[NUM_TLBCAMS];
+
+extern unsigned int tlbcam_index;
+
+/*
+ * Return PA for this VA if it is mapped by a CAM, or 0
+ */
+unsigned long v_mapped_by_tlbcam(unsigned long va)
+{
+ int b;
+ for (b = 0; b < tlbcam_index; ++b)
+ if (va >= tlbcam_addrs[b].start && va < tlbcam_addrs[b].limit)
+ return tlbcam_addrs[b].phys + (va - tlbcam_addrs[b].start);
+ return 0;
+}
+
+/*
+ * Return VA for a given PA or 0 if not mapped
+ */
+unsigned long p_mapped_by_tlbcam(unsigned long pa)
+{
+ int b;
+ for (b = 0; b < tlbcam_index; ++b)
+ if (pa >= tlbcam_addrs[b].phys
+ && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
+ +tlbcam_addrs[b].phys)
+ return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys);
+ return 0;
+}
+
+/*
+ * Set up one of the I/D BAT (block address translation) register pairs.
+ * The parameters are not checked; in particular size must be a power
+ * of 4 between 4k and 256M.
+ */
+void settlbcam(int index, unsigned long virt, phys_addr_t phys,
+ unsigned int size, int flags, unsigned int pid)
+{
+ unsigned int tsize, lz;
+
+ asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
+ tsize = (21 - lz) / 2;
+
+#ifdef CONFIG_SMP
+ if ((flags & _PAGE_NO_CACHE) == 0)
+ flags |= _PAGE_COHERENT;
+#endif
+
+ TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1);
+ TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid);
+ TLBCAM[index].MAS2 = virt & PAGE_MASK;
+
+ TLBCAM[index].MAS2 |= (flags & _PAGE_WRITETHRU) ? MAS2_W : 0;
+ TLBCAM[index].MAS2 |= (flags & _PAGE_NO_CACHE) ? MAS2_I : 0;
+ TLBCAM[index].MAS2 |= (flags & _PAGE_COHERENT) ? MAS2_M : 0;
+ TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0;
+ TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0;
+
+ TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR;
+ TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0);
+
+#ifndef CONFIG_KGDB /* want user access for breakpoints */
+ if (flags & _PAGE_USER) {
+ TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
+ TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
+ }
+#else
+ TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
+ TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
+#endif
+
+ tlbcam_addrs[index].start = virt;
+ tlbcam_addrs[index].limit = virt + size - 1;
+ tlbcam_addrs[index].phys = phys;
+
+ loadcam_entry(index);
+}
+
+void invalidate_tlbcam_entry(int index)
+{
+ TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index);
+ TLBCAM[index].MAS1 = ~MAS1_VALID;
+
+ loadcam_entry(index);
+}
+
+void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
+ unsigned long cam2)
+{
+ settlbcam(0, KERNELBASE, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
+ tlbcam_index++;
+ if (cam1) {
+ tlbcam_index++;
+ settlbcam(1, KERNELBASE+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
+ }
+ if (cam2) {
+ tlbcam_index++;
+ settlbcam(2, KERNELBASE+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
+ }
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+ flush_instruction_cache();
+}
+
+unsigned long __init mmu_mapin_ram(void)
+{
+ cam_mapin_ram(__cam0, __cam1, __cam2);
+
+ return __cam0 + __cam1 + __cam2;
+}
+
+
+void __init
+adjust_total_lowmem(void)
+{
+ unsigned long max_low_mem = MAX_LOW_MEM;
+ unsigned long cam_max = 0x10000000;
+ unsigned long ram;
+
+ /* adjust CAM size to max_low_mem */
+ if (max_low_mem < cam_max)
+ cam_max = max_low_mem;
+
+ /* adjust lowmem size to max_low_mem */
+ if (max_low_mem < total_lowmem)
+ ram = max_low_mem;
+ else
+ ram = total_lowmem;
+
+ /* Calculate CAM values */
+ __cam0 = 1UL << 2 * (__ilog2(ram) / 2);
+ if (__cam0 > cam_max)
+ __cam0 = cam_max;
+ ram -= __cam0;
+ if (ram) {
+ __cam1 = 1UL << 2 * (__ilog2(ram) / 2);
+ if (__cam1 > cam_max)
+ __cam1 = cam_max;
+ ram -= __cam1;
+ }
+ if (ram) {
+ __cam2 = 1UL << 2 * (__ilog2(ram) / 2);
+ if (__cam2 > cam_max)
+ __cam2 = cam_max;
+ ram -= __cam2;
+ }
+
+ printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb,"
+ " CAM2=%ldMb residual: %ldMb\n",
+ __cam0 >> 20, __cam1 >> 20, __cam2 >> 20,
+ (total_lowmem - __cam0 - __cam1 - __cam2) >> 20);
+ __max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2;
+}