rtc: snvs: fix wakealarm by call enable_irq_wake earlier
When entering suspend while an wakeup alarm is set, enable_set_wake
should make sure that the RTC interrupt keep being enabled and the
.irq_set_wake for the RTC interrupt get called. However, since the
driver uses the suspend_noirq callback, the call to enable_irq_wake
has been made after disabling the interrupts. While .irq_set_wake
has been called properly, the interrupt remained disabled.
Use the suspend callback to call enable_irq_wake early enough to
ensure the RTC interrupt remains enabled.
Fixes: 7654e9d4fd8f ("drivers/rtc/rtc-snvs: fix suspend/resume")
Cc: <stable@vger.kernel.org> # 3.19
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
diff --git a/drivers/rtc/rtc-snvs.c b/drivers/rtc/rtc-snvs.c
index 0479e80..d87a85c 100644
--- a/drivers/rtc/rtc-snvs.c
+++ b/drivers/rtc/rtc-snvs.c
@@ -322,6 +322,13 @@
if (device_may_wakeup(dev))
enable_irq_wake(data->irq);
+ return 0;
+}
+
+static int snvs_rtc_suspend_noirq(struct device *dev)
+{
+ struct snvs_rtc_data *data = dev_get_drvdata(dev);
+
if (data->clk)
clk_disable_unprepare(data->clk);
@@ -331,23 +338,28 @@
static int snvs_rtc_resume(struct device *dev)
{
struct snvs_rtc_data *data = dev_get_drvdata(dev);
- int ret;
if (device_may_wakeup(dev))
- disable_irq_wake(data->irq);
+ return disable_irq_wake(data->irq);
- if (data->clk) {
- ret = clk_prepare_enable(data->clk);
- if (ret)
- return ret;
- }
+ return 0;
+}
+
+static int snvs_rtc_resume_noirq(struct device *dev)
+{
+ struct snvs_rtc_data *data = dev_get_drvdata(dev);
+
+ if (data->clk)
+ return clk_prepare_enable(data->clk);
return 0;
}
static const struct dev_pm_ops snvs_rtc_pm_ops = {
- .suspend_noirq = snvs_rtc_suspend,
- .resume_noirq = snvs_rtc_resume,
+ .suspend = snvs_rtc_suspend,
+ .suspend_noirq = snvs_rtc_suspend_noirq,
+ .resume = snvs_rtc_resume,
+ .resume_noirq = snvs_rtc_resume_noirq,
};
#define SNVS_RTC_PM_OPS (&snvs_rtc_pm_ops)