MMC: au1xmmc: Remove Alchemy CPU subtype dependencies
Replace all occurrences of CONFIG_SOC_AU1??? with runtime feature detection.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: linux-mmc@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2683/
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index ef72e87..56e7834 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -64,11 +64,8 @@
#define AU1XMMC_DESCRIPTOR_COUNT 1
/* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */
-#ifdef CONFIG_SOC_AU1100
-#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff
-#else /* Au1200 */
-#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff
-#endif
+#define AU1100_MMC_DESCRIPTOR_SIZE 0x0000ffff
+#define AU1200_MMC_DESCRIPTOR_SIZE 0x003fffff
#define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
@@ -127,6 +124,7 @@
#define HOST_F_XMIT 0x0001
#define HOST_F_RECV 0x0002
#define HOST_F_DMA 0x0010
+#define HOST_F_DBDMA 0x0020
#define HOST_F_ACTIVE 0x0100
#define HOST_F_STOP 0x1000
@@ -151,6 +149,16 @@
#define DMA_CHANNEL(h) \
(((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
+static inline int has_dbdma(void)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1200:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask)
{
u32 val = au_readl(HOST_CONFIG(host));
@@ -353,14 +361,12 @@
data->bytes_xfered = 0;
if (!data->error) {
- if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200 /* DBDMA */
+ if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) {
u32 chan = DMA_CHANNEL(host);
chan_tab_t *c = *((chan_tab_t **)chan);
au1x_dma_chan_t *cp = c->chan_ptr;
data->bytes_xfered = cp->ddma_bytecnt;
-#endif
} else
data->bytes_xfered =
(data->blocks * data->blksz) - host->pio.len;
@@ -570,11 +576,10 @@
host->status = HOST_S_DATA;
- if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200 /* DBDMA */
+ if ((host->flags & (HOST_F_DMA | HOST_F_DBDMA))) {
u32 channel = DMA_CHANNEL(host);
- /* Start the DMA as soon as the buffer gets something in it */
+ /* Start the DBDMA as soon as the buffer gets something in it */
if (host->flags & HOST_F_RECV) {
u32 mask = SD_STATUS_DB | SD_STATUS_NE;
@@ -584,7 +589,6 @@
}
au1xxx_dbdma_start(channel);
-#endif
}
}
@@ -633,8 +637,7 @@
au_writel(data->blksz - 1, HOST_BLKSIZE(host));
- if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200 /* DBDMA */
+ if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) {
int i;
u32 channel = DMA_CHANNEL(host);
@@ -663,7 +666,6 @@
datalen -= len;
}
-#endif
} else {
host->pio.index = 0;
host->pio.offset = 0;
@@ -838,7 +840,6 @@
return IRQ_HANDLED;
}
-#ifdef CONFIG_SOC_AU1200
/* 8bit memory DMA device */
static dbdev_tab_t au1xmmc_mem_dbdev = {
.dev_id = DSCR_CMD0_ALWAYS,
@@ -905,7 +906,7 @@
au1xxx_dbdma_ring_alloc(host->rx_chan, AU1XMMC_DESCRIPTOR_COUNT);
/* DBDMA is good to go */
- host->flags |= HOST_F_DMA;
+ host->flags |= HOST_F_DMA | HOST_F_DBDMA;
return 0;
}
@@ -918,7 +919,6 @@
au1xxx_dbdma_chan_free(host->rx_chan);
}
}
-#endif
static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en)
{
@@ -997,8 +997,16 @@
mmc->f_min = 450000;
mmc->f_max = 24000000;
- mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
- mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1100:
+ mmc->max_seg_size = AU1100_MMC_DESCRIPTOR_SIZE;
+ mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+ break;
+ case ALCHEMY_CPU_AU1200:
+ mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE;
+ mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+ break;
+ }
mmc->max_blk_size = 2048;
mmc->max_blk_count = 512;
@@ -1028,11 +1036,12 @@
tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
(unsigned long)host);
-#ifdef CONFIG_SOC_AU1200
- ret = au1xmmc_dbdma_init(host);
- if (ret)
- printk(KERN_INFO DRIVER_NAME ": DBDMA init failed; using PIO\n");
-#endif
+ if (has_dbdma()) {
+ ret = au1xmmc_dbdma_init(host);
+ if (ret)
+ printk(KERN_INFO DRIVER_NAME ": DBDMA init failed; "
+ "using PIO\n");
+ }
#ifdef CONFIG_LEDS_CLASS
if (host->platdata && host->platdata->led) {
@@ -1073,9 +1082,8 @@
au_writel(0, HOST_CONFIG2(host));
au_sync();
-#ifdef CONFIG_SOC_AU1200
- au1xmmc_dbdma_shutdown(host);
-#endif
+ if (host->flags & HOST_F_DBDMA)
+ au1xmmc_dbdma_shutdown(host);
tasklet_kill(&host->data_task);
tasklet_kill(&host->finish_task);
@@ -1120,9 +1128,9 @@
tasklet_kill(&host->data_task);
tasklet_kill(&host->finish_task);
-#ifdef CONFIG_SOC_AU1200
- au1xmmc_dbdma_shutdown(host);
-#endif
+ if (host->flags & HOST_F_DBDMA)
+ au1xmmc_dbdma_shutdown(host);
+
au1xmmc_set_power(host, 0);
free_irq(host->irq, host);
@@ -1181,24 +1189,23 @@
static int __init au1xmmc_init(void)
{
-#ifdef CONFIG_SOC_AU1200
- /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
- * of 8 bits. And since devices are shared, we need to create
- * our own to avoid freaking out other devices.
- */
- memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
- if (!memid)
- printk(KERN_ERR "au1xmmc: cannot add memory dbdma dev\n");
-#endif
+ if (has_dbdma()) {
+ /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
+ * of 8 bits. And since devices are shared, we need to create
+ * our own to avoid freaking out other devices.
+ */
+ memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
+ if (!memid)
+ printk(KERN_ERR "au1xmmc: cannot add memory dbdma\n");
+ }
return platform_driver_register(&au1xmmc_driver);
}
static void __exit au1xmmc_exit(void)
{
-#ifdef CONFIG_SOC_AU1200
- if (memid)
+ if (has_dbdma() && memid)
au1xxx_ddma_del_device(memid);
-#endif
+
platform_driver_unregister(&au1xmmc_driver);
}