ALSA: sound/atmel/ac97c.c: Add missing clock prepare
Clocks must be prepared before enabling them. Do this in one step.
Replace clk_enable with clk_prepare_enable and clk_disable with
clk_disable_unprepare. This fixes the following warning:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:895 __clk_enable+0x24/0x9c()
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.18.0-rc7+ #245
[<c000dce8>] (unwind_backtrace) from [<c000bcf0>] (show_stack+0x10/0x14)
[<c000bcf0>] (show_stack) from [<c001664c>] (warn_slowpath_common+0x60/0x80)
[<c001664c>] (warn_slowpath_common) from [<c00166fc>] (warn_slowpath_null+0x18/0x20)
[<c00166fc>] (warn_slowpath_null) from [<c02fd7ac>] (__clk_enable+0x24/0x9c)
[<c02fd7ac>] (__clk_enable) from [<c02fdbb4>] (clk_enable+0x18/0x2c)
[<c02fdbb4>] (clk_enable) from [<c0322688>] (atmel_ac97c_probe+0x154/0x694)
[<c0322688>] (atmel_ac97c_probe) from [<c0235e08>] (platform_drv_probe+0x48/0x94)
[<c0235e08>] (platform_drv_probe) from [<c02345f8>] (driver_probe_device+0x138/0x350)
[<c02345f8>] (driver_probe_device) from [<c02348bc>] (__driver_attach+0x68/0x8c)
[<c02348bc>] (__driver_attach) from [<c0232bd0>] (bus_for_each_dev+0x70/0x84)
[<c0232bd0>] (bus_for_each_dev) from [<c0233cd8>] (bus_add_driver+0xfc/0x1f8)
[<c0233cd8>] (bus_add_driver) from [<c0234f0c>] (driver_register+0x9c/0xe0)
[<c0234f0c>] (driver_register) from [<c0008ac4>] (do_one_initcall+0x110/0x1c8)
[<c0008ac4>] (do_one_initcall) from [<c053cd58>] (kernel_init_freeable+0xf8/0x1b8)
[<c053cd58>] (kernel_init_freeable) from [<c03c0414>] (kernel_init+0x8/0xe4)
[<c03c0414>] (kernel_init) from [<c00096d0>] (ret_from_fork+0x14/0x24)
---[ end trace cb88537fdc8fa201 ]---
atmel_ac97c fffa0000.sound: AC'97 0 does not respond - RESET
atmel_ac97c fffa0000.sound: AC'97 0 access is not valid [0xffffffff], removing mixer.
------------[ cut here ]------------
Signed-off-by: Alexander Stein <alexanders83@web.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c
index f1d1195..cb44c74 100644
--- a/sound/atmel/ac97c.c
+++ b/sound/atmel/ac97c.c
@@ -944,7 +944,7 @@
dev_dbg(&pdev->dev, "no peripheral clock\n");
return PTR_ERR(pclk);
}
- clk_enable(pclk);
+ clk_prepare_enable(pclk);
retval = snd_card_new(&pdev->dev, SNDRV_DEFAULT_IDX1,
SNDRV_DEFAULT_STR1, THIS_MODULE,
@@ -1122,7 +1122,7 @@
err_request_irq:
snd_card_free(card);
err_snd_card_new:
- clk_disable(pclk);
+ clk_disable_unprepare(pclk);
clk_put(pclk);
return retval;
}
@@ -1139,7 +1139,7 @@
if (test_bit(DMA_TX_READY, &chip->flags))
dw_dma_cyclic_stop(chip->dma.tx_chan);
}
- clk_disable(chip->pclk);
+ clk_disable_unprepare(chip->pclk);
return 0;
}
@@ -1149,7 +1149,7 @@
struct snd_card *card = dev_get_drvdata(pdev);
struct atmel_ac97c *chip = card->private_data;
- clk_enable(chip->pclk);
+ clk_prepare_enable(chip->pclk);
if (cpu_is_at32ap7000()) {
if (test_bit(DMA_RX_READY, &chip->flags))
dw_dma_cyclic_start(chip->dma.rx_chan);
@@ -1177,7 +1177,7 @@
ac97c_writel(chip, COMR, 0);
ac97c_writel(chip, MR, 0);
- clk_disable(chip->pclk);
+ clk_disable_unprepare(chip->pclk);
clk_put(chip->pclk);
iounmap(chip->regs);
free_irq(chip->irq, chip);