[ALSA] sound/isa: kill pnp_resource_change
This removes the pnp_resource_change use from the ALSA ISAPnP drivers. In
2.4 these were useful in providing an easy path to setting the resources,
but in 2.6 they retain function as a layering violation only.
This makes for a nice cleanup (-550 lines) of ALSA but moreover, ALSA is the
only remaining user of pnp_init_resource_table(), pnp_resource_change() and
pnp_manual_config_dev() (and, in fact, of 'struct pnp_resource_table') in
the tree outide of drivers/pnp itself meaning it makes for more cleanup
potential inside the PnP layer.
Thomas Renninger acked their removal from that side, you did from the ALSA
side (CC list just copied from that thread).
Against current alsa-kernel HG. Many more potential cleanups in there, but
this _only_ removes the pnp_resource_change code. Compile tested against
current alsa-kernel HG and compile- and use-tested against 2.6.23.x (few
offsets).
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c
index 59af9ab7..125f699 100644
--- a/sound/isa/opl3sa2.c
+++ b/sound/isa/opl3sa2.c
@@ -610,39 +610,8 @@
static int __devinit snd_opl3sa2_pnp(int dev, struct snd_opl3sa2 *chip,
struct pnp_dev *pdev)
{
- struct pnp_resource_table * cfg;
- int err;
-
- cfg = kmalloc(sizeof(struct pnp_resource_table), GFP_KERNEL);
- if (!cfg) {
- snd_printk(KERN_ERR PFX "cannot allocate pnp cfg\n");
- return -ENOMEM;
- }
- /* PnP initialization */
- pnp_init_resource_table(cfg);
- if (sb_port[dev] != SNDRV_AUTO_PORT)
- pnp_resource_change(&cfg->port_resource[0], sb_port[dev], 16);
- if (wss_port[dev] != SNDRV_AUTO_PORT)
- pnp_resource_change(&cfg->port_resource[1], wss_port[dev], 8);
- if (fm_port[dev] != SNDRV_AUTO_PORT)
- pnp_resource_change(&cfg->port_resource[2], fm_port[dev], 4);
- if (midi_port[dev] != SNDRV_AUTO_PORT)
- pnp_resource_change(&cfg->port_resource[3], midi_port[dev], 2);
- if (port[dev] != SNDRV_AUTO_PORT)
- pnp_resource_change(&cfg->port_resource[4], port[dev], 2);
- if (dma1[dev] != SNDRV_AUTO_DMA)
- pnp_resource_change(&cfg->dma_resource[0], dma1[dev], 1);
- if (dma2[dev] != SNDRV_AUTO_DMA)
- pnp_resource_change(&cfg->dma_resource[1], dma2[dev], 1);
- if (irq[dev] != SNDRV_AUTO_IRQ)
- pnp_resource_change(&cfg->irq_resource[0], irq[dev], 1);
- err = pnp_manual_config_dev(pdev, cfg, 0);
- if (err < 0)
- snd_printk(KERN_WARNING "PnP manual resources are invalid, using auto config\n");
- err = pnp_activate_dev(pdev);
- if (err < 0) {
- kfree(cfg);
- snd_printk(KERN_ERR "PnP configure failure (out of resources?) err = %d\n", err);
+ if (pnp_activate_dev(pdev) < 0) {
+ snd_printk(KERN_ERR "PnP configure failure (out of resources?)\n");
return -EBUSY;
}
sb_port[dev] = pnp_port_start(pdev, 0);
@@ -657,7 +626,6 @@
pnp_device_is_pnpbios(pdev) ? "BIOS" : "ISA", sb_port[dev], wss_port[dev], fm_port[dev], midi_port[dev]);
snd_printdd("%sPnP OPL3-SA: control port=0x%lx, dma1=%i, dma2=%i, irq=%i\n",
pnp_device_is_pnpbios(pdev) ? "BIOS" : "ISA", port[dev], dma1[dev], dma2[dev], irq[dev]);
- kfree(cfg);
return 0;
}
#endif /* CONFIG_PNP */