net: ena: add support for traffic mirroring

Add support for traffic mirroring, where the hardware reads the
buffer from the instance memory directly.

Traffic Mirroring needs access to the rx buffers in the instance.
To have this access, this patch:
1. Changes the code to map and unmap the rx buffers bidirectionally.
2. Enables the relevant bit in driver_supported_features to indicate
   to the FW that this driver supports traffic mirroring.

Rx completion is not generated until mirroring is done to avoid
the situation where the driver changes the buffer before it is
mirrored.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/amazon/ena/ena_admin_defs.h b/drivers/net/ethernet/amazon/ena/ena_admin_defs.h
index 336742f..afe87ff 100644
--- a/drivers/net/ethernet/amazon/ena/ena_admin_defs.h
+++ b/drivers/net/ethernet/amazon/ena/ena_admin_defs.h
@@ -816,7 +816,8 @@ struct ena_admin_host_info {
 	/* 0 : reserved
 	 * 1 : rx_offset
 	 * 2 : interrupt_moderation
-	 * 31:3 : reserved
+	 * 3 : rx_buf_mirroring
+	 * 31:4 : reserved
 	 */
 	u32 driver_supported_features;
 };
@@ -1129,6 +1130,8 @@ struct ena_admin_ena_mmio_req_read_less_resp {
 #define ENA_ADMIN_HOST_INFO_RX_OFFSET_MASK                  BIT(1)
 #define ENA_ADMIN_HOST_INFO_INTERRUPT_MODERATION_SHIFT      2
 #define ENA_ADMIN_HOST_INFO_INTERRUPT_MODERATION_MASK       BIT(2)
+#define ENA_ADMIN_HOST_INFO_RX_BUF_MIRRORING_SHIFT          3
+#define ENA_ADMIN_HOST_INFO_RX_BUF_MIRRORING_MASK           BIT(3)
 
 /* aenq_common_desc */
 #define ENA_ADMIN_AENQ_COMMON_DESC_PHASE_MASK               BIT(0)
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index d3d2e39..0563cb3 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -959,8 +959,11 @@ static int ena_alloc_rx_page(struct ena_ring *rx_ring,
 		return -ENOMEM;
 	}
 
+	/* To enable NIC-side port-mirroring, AKA SPAN port,
+	 * we make the buffer readable from the nic as well
+	 */
 	dma = dma_map_page(rx_ring->dev, page, 0, ENA_PAGE_SIZE,
-			   DMA_FROM_DEVICE);
+			   DMA_BIDIRECTIONAL);
 	if (unlikely(dma_mapping_error(rx_ring->dev, dma))) {
 		u64_stats_update_begin(&rx_ring->syncp);
 		rx_ring->rx_stats.dma_mapping_err++;
@@ -993,10 +996,9 @@ static void ena_free_rx_page(struct ena_ring *rx_ring,
 		return;
 	}
 
-	dma_unmap_page(rx_ring->dev,
-		       ena_buf->paddr - rx_ring->rx_headroom,
+	dma_unmap_page(rx_ring->dev, ena_buf->paddr - rx_ring->rx_headroom,
 		       ENA_PAGE_SIZE,
-		       DMA_FROM_DEVICE);
+		       DMA_BIDIRECTIONAL);
 
 	__free_page(page);
 	rx_info->page = NULL;
@@ -1431,7 +1433,7 @@ static struct sk_buff *ena_rx_skb(struct ena_ring *rx_ring,
 	do {
 		dma_unmap_page(rx_ring->dev,
 			       dma_unmap_addr(&rx_info->ena_buf, paddr),
-			       ENA_PAGE_SIZE, DMA_FROM_DEVICE);
+			       ENA_PAGE_SIZE, DMA_BIDIRECTIONAL);
 
 		skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rx_info->page,
 				rx_info->page_offset, len, ENA_PAGE_SIZE);
@@ -3123,7 +3125,8 @@ static void ena_config_host_info(struct ena_com_dev *ena_dev, struct pci_dev *pd
 
 	host_info->driver_supported_features =
 		ENA_ADMIN_HOST_INFO_RX_OFFSET_MASK |
-		ENA_ADMIN_HOST_INFO_INTERRUPT_MODERATION_MASK;
+		ENA_ADMIN_HOST_INFO_INTERRUPT_MODERATION_MASK |
+		ENA_ADMIN_HOST_INFO_RX_BUF_MIRRORING_MASK;
 
 	rc = ena_com_set_host_attributes(ena_dev);
 	if (rc) {