Documentation: Update paths of Samsung S3C machine files
Documentation references Samsung S3C24xx and S3C64xx machine files in
multiple places but the files were traveling around the kernel multiple
times.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200911143343.498-1-krzk@kernel.org
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 526d65d..bd512b7 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2951,7 +2951,7 @@
mtdset= [ARM]
ARM/S3C2412 JIVE boot control
- See arch/arm/mach-s3c2412/mach-jive.c
+ See arch/arm/mach-s3c/mach-jive.c
mtouchusb.raw_coordinates=
[HW] Make the MicroTouch USB driver use raw coordinates
diff --git a/Documentation/arm/samsung-s3c24xx/gpio.rst b/Documentation/arm/samsung-s3c24xx/gpio.rst
index f7c3d7d..f4a8c80 100644
--- a/Documentation/arm/samsung-s3c24xx/gpio.rst
+++ b/Documentation/arm/samsung-s3c24xx/gpio.rst
@@ -29,7 +29,7 @@
The following functions now either have a `s3c_` specific variant
or are merged into gpiolib. See the definitions in
- arch/arm/plat-samsung/include/plat/gpio-cfg.h:
+ arch/arm/mach-s3c/gpio-cfg.h:
- s3c2410_gpio_setpin() gpio_set_value() or gpio_direction_output()
- s3c2410_gpio_getpin() gpio_get_value() or gpio_direction_input()
@@ -86,7 +86,7 @@
Headers
-------
- See arch/arm/mach-s3c24xx/include/mach/regs-gpio.h for the list
+ See arch/arm/mach-s3c/regs-gpio-s3c24xx.h for the list
of GPIO pins, and the configuration values for them. This
is included by using #include <mach/regs-gpio.h>
diff --git a/Documentation/arm/samsung-s3c24xx/overview.rst b/Documentation/arm/samsung-s3c24xx/overview.rst
index e9a1dc7..14535e5 100644
--- a/Documentation/arm/samsung-s3c24xx/overview.rst
+++ b/Documentation/arm/samsung-s3c24xx/overview.rst
@@ -18,7 +18,7 @@
versions.
The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
- included under the arch/arm/mach-s3c2416 directory. Note, while core
+ included under the arch/arm/mach-s3c directory. Note, while core
support for these SoCs is in, work on some of the extra peripherals
and extra interrupts is still ongoing.
@@ -37,19 +37,11 @@
Layout
------
- The core support files are located in the platform code contained in
- arch/arm/plat-s3c24xx with headers in include/asm-arm/plat-s3c24xx.
- This directory should be kept to items shared between the platform
- code (arch/arm/plat-s3c24xx) and the arch/arm/mach-s3c24* code.
+ The core support files, register, kernel and paltform data are located in the
+ platform code contained in arch/arm/mach-s3c with headers in
+ arch/arm/mach-s3c/include
- Each cpu has a directory with the support files for it, and the
- machines that carry the device. For example S3C2410 is contained
- in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440
-
- Register, kernel and platform data definitions are held in the
- arch/arm/mach-s3c2410 directory./include/mach
-
-arch/arm/plat-s3c24xx:
+arch/arm/mach-s3c:
Files in here are either common to all the s3c24xx family,
or are common to only some of them with names to indicate this
@@ -134,7 +126,7 @@
should keep this in mind before altering items outside of their own
machine files.
- Machine definitions should be kept in linux/arch/arm/mach-s3c2410,
+ Machine definitions should be kept in arch/arm/mach-s3c,
and there are a number of examples that can be looked at.
Read the kernel patch submission policies as well as the
@@ -293,7 +285,7 @@
}
Note, since the code is marked as __init, it should not be
- exported outside arch/arm/mach-s3c2410/, or exported to
+ exported outside arch/arm/mach-s3c/, or exported to
modules via EXPORT_SYMBOL() and related functions.
diff --git a/Documentation/arm/samsung-s3c24xx/usb-host.rst b/Documentation/arm/samsung-s3c24xx/usb-host.rst
index c84268b..7aaffac 100644
--- a/Documentation/arm/samsung-s3c24xx/usb-host.rst
+++ b/Documentation/arm/samsung-s3c24xx/usb-host.rst
@@ -36,7 +36,7 @@
-------------
The driver attaches to a platform device, which will need to be
- added by the board specific support file in linux/arch/arm/mach-s3c2410,
+ added by the board specific support file in arch/arm/mach-s3c,
such as mach-bast.c or mach-smdk2410.c
The platform device's platform_data field is only needed if the
@@ -51,9 +51,9 @@
Platform Data
-------------
- See arch/arm/mach-s3c2410/include/mach/usb-control.h for the
+ See include/linux/platform_data/usb-ohci-s3c2410.h for the
descriptions of the platform device data. An implementation
- can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c .
+ can be found in arch/arm/mach-s3c/simtec-usb.c .
The `struct s3c2410_hcd_info` contains a pair of functions
that get called to enable over-current detection, and to
diff --git a/Documentation/arm/samsung/gpio.rst b/Documentation/arm/samsung/gpio.rst
index 5f7cadd..f6e27b0 100644
--- a/Documentation/arm/samsung/gpio.rst
+++ b/Documentation/arm/samsung/gpio.rst
@@ -37,5 +37,4 @@
The s3c_gpio_cfgpin() and s3c_gpio_setpull() provide the means for a
driver or machine to change gpio configuration.
-See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information
-on these functions.
+See arch/arm/mach-s3c/gpio-cfg.h for more information on these functions.
diff --git a/Documentation/networking/device_drivers/ethernet/davicom/dm9000.rst b/Documentation/networking/device_drivers/ethernet/davicom/dm9000.rst
index d5458da..14eb0a4 100644
--- a/Documentation/networking/device_drivers/ethernet/davicom/dm9000.rst
+++ b/Documentation/networking/device_drivers/ethernet/davicom/dm9000.rst
@@ -34,7 +34,7 @@
two address regions is important (the driver expects these to be address
and then data).
-An example from arch/arm/mach-s3c2410/mach-bast.c is::
+An example from arch/arm/mach-s3c/mach-bast.c is::
static struct resource bast_dm9k_resource[] = {
[0] = {