ARM: dts: Configure regulators for droid 4
With drivers/mfd/motorola-cpcap.c and drivers/regulator/cpcap-regulator.c
we can now configure proper regulators for droid 4.
Let's add regulator voltages and switch over MMC, eMMC and WLAN to use
the CPCAP regulators.
Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Tested-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index 2140be8..e5b56fc 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -7,6 +7,7 @@
#include <dt-bindings/input/input.h>
#include "omap443x.dtsi"
+#include "motorola-cpcap-mapphone.dtsi"
/ {
model = "Motorola Droid 4 XT894";
@@ -26,25 +27,7 @@
reg = <0x80000000 0x3fd00000>; /* 1021 MB */
};
- /* CPCAP really supports 1650000 to 3400000 range */
- vmmc: regulator-mmc {
- compatible = "regulator-fixed";
- regulator-name = "vmmc";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- /* CPCAP really supports 3000000 to 3100000 range */
- vemmc: regulator-emmc {
- compatible = "regulator-fixed";
- regulator-name = "vemmc";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- /* CPCAP really supports 1650000 to 1950000 range */
+ /* This is probably coming straight from the battery.. */
wl12xx_vmmc: regulator-wl12xx {
compatible = "regulator-fixed";
regulator-name = "vwl1271";
@@ -136,13 +119,13 @@
};
&mmc1 {
- vmmc-supply = <&vmmc>;
+ vmmc-supply = <&vsimcard>;
bus-width = <4>;
cd-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
};
&mmc2 {
- vmmc-supply = <&vemmc>;
+ vmmc-supply = <&vsdio>;
bus-width = <8>;
non-removable;
};