mac80211: introduce capability flags for VHT EXT NSS support
Depending on whether or not rate control supports selecting
rates depending on the bandwidth, we can use VHT extended
NSS support. In essence, this is dot11VHTExtendedNSSBWCapable
from the spec, since depending on that we'll need to parse
the bandwidth.
If needed, also set/clear the VHT Capability Element bit for
this capability so that we don't advertise it erroneously or
don't advertise it when we actually use it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
index 964663f..fb45eb5 100644
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -216,6 +216,7 @@ static const char *hw_flag_names[] = {
FLAG(DEAUTH_NEED_MGD_TX_PREP),
FLAG(DOESNT_SUPPORT_QOS_NDP),
FLAG(BUFF_MMPDU_TXQ),
+ FLAG(SUPPORTS_VHT_EXT_NSS_BW),
#undef FLAG
};
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 348a52c..08da90a 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1199,6 +1199,9 @@ struct ieee80211_local {
/* number of RX chains the hardware has */
u8 rx_chains;
+ /* bitmap of which sbands were copied */
+ u8 sband_allocated;
+
int tx_headroom; /* required headroom for hardware/radiotap */
/* Tasklet and skb queue to process calls from IRQ mode. All frames
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 2d51eca..c78629f 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -4,6 +4,7 @@
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright (C) 2017 Intel Deutschland GmbH
+ * Copyright (C) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -1158,6 +1159,51 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
goto fail_rate;
}
+ if (local->rate_ctrl) {
+ clear_bit(IEEE80211_HW_SUPPORTS_VHT_EXT_NSS_BW, hw->flags);
+ if (local->rate_ctrl->ops->capa & RATE_CTRL_CAPA_VHT_EXT_NSS_BW)
+ ieee80211_hw_set(hw, SUPPORTS_VHT_EXT_NSS_BW);
+ }
+
+ /*
+ * If the VHT capabilities don't have IEEE80211_VHT_EXT_NSS_BW_CAPABLE,
+ * or have it when we don't, copy the sband structure and set/clear it.
+ * This is necessary because rate scaling algorithms could be switched
+ * and have different support values.
+ * Print a message so that in the common case the reallocation can be
+ * avoided.
+ */
+ BUILD_BUG_ON(NUM_NL80211_BANDS > 8 * sizeof(local->sband_allocated));
+ for (band = 0; band < NUM_NL80211_BANDS; band++) {
+ struct ieee80211_supported_band *sband;
+ bool local_cap, ie_cap;
+
+ local_cap = ieee80211_hw_check(hw, SUPPORTS_VHT_EXT_NSS_BW);
+
+ sband = local->hw.wiphy->bands[band];
+ if (!sband || !sband->vht_cap.vht_supported)
+ continue;
+
+ ie_cap = !!(sband->vht_cap.vht_mcs.tx_highest &
+ cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE));
+
+ if (local_cap == ie_cap)
+ continue;
+
+ sband = kmemdup(sband, sizeof(*sband), GFP_KERNEL);
+ if (!sband)
+ goto fail_rate;
+
+ wiphy_dbg(hw->wiphy, "copying sband (band %d) due to VHT EXT NSS BW flag\n",
+ band);
+
+ sband->vht_cap.vht_mcs.tx_highest ^=
+ cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE);
+
+ local->hw.wiphy->bands[band] = sband;
+ local->sband_allocated |= BIT(band);
+ }
+
/* add one default STA interface if supported */
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION) &&
!ieee80211_hw_check(hw, NO_AUTO_VIF)) {
@@ -1276,6 +1322,7 @@ static int ieee80211_free_ack_frame(int id, void *p, void *data)
void ieee80211_free_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
+ enum nl80211_band band;
mutex_destroy(&local->iflist_mtx);
mutex_destroy(&local->mtx);
@@ -1291,6 +1338,12 @@ void ieee80211_free_hw(struct ieee80211_hw *hw)
ieee80211_free_led_names(local);
+ for (band = 0; band < NUM_NL80211_BANDS; band++) {
+ if (!(local->sband_allocated & BIT(band)))
+ continue;
+ kfree(local->hw.wiphy->bands[band]);
+ }
+
wiphy_free(local->hw.wiphy);
}
EXPORT_SYMBOL(ieee80211_free_hw);