hpsa: use workqueue to resubmit failed ioaccel commands
Instead of kicking the commands all the way back to the mid
layer, use a work queue. This enables having a mechanism for
the driver to be able to resubmit the commands down the "normal"
raid path without turning off the ioaccel feature entirely
whenever an error is encountered on the ioaccel path, and
prevent excessive rescanning of devices.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index cc3128f..dcacb29 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -248,6 +248,7 @@
static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
u8 *scsi3addr);
+static void hpsa_command_resubmit_worker(struct work_struct *work);
static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
{
@@ -1619,7 +1620,6 @@
struct hpsa_scsi_dev_t *dev)
{
struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
- int raid_retry = 0;
/* check for good status */
if (likely(c2->error_data.serv_response == 0 &&
@@ -1636,24 +1636,22 @@
if (is_logical_dev_addr_mode(dev->scsi3addr) &&
c2->error_data.serv_response ==
IOACCEL2_SERV_RESPONSE_FAILURE) {
- dev->offload_enabled = 0;
- cmd->result = DID_SOFT_ERROR << 16;
- cmd_free(h, c);
- cmd->scsi_done(cmd);
- return;
+ if (c2->error_data.status ==
+ IOACCEL2_STATUS_SR_IOACCEL_DISABLED)
+ dev->offload_enabled = 0;
+ goto retry_cmd;
}
- raid_retry = handle_ioaccel_mode2_error(h, c, cmd, c2);
- /* If error found, disable Smart Path,
- * force a retry on the standard path.
- */
- if (raid_retry) {
- dev_warn(&h->pdev->dev, "%s: Retrying on standard path.\n",
- "HP SSD Smart Path");
- dev->offload_enabled = 0; /* Disable Smart Path */
- cmd->result = DID_SOFT_ERROR << 16;
- }
+
+ if (handle_ioaccel_mode2_error(h, c, cmd, c2))
+ goto retry_cmd;
+
cmd_free(h, c);
cmd->scsi_done(cmd);
+ return;
+
+retry_cmd:
+ INIT_WORK(&c->work, hpsa_command_resubmit_worker);
+ queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work);
}
static void complete_scsi_command(struct CommandList *cp)
@@ -1723,9 +1721,9 @@
if (is_logical_dev_addr_mode(dev->scsi3addr)) {
if (ei->CommandStatus == CMD_IOACCEL_DISABLED)
dev->offload_enabled = 0;
- cmd->result = DID_SOFT_ERROR << 16;
- cmd_free(h, cp);
- cmd->scsi_done(cmd);
+ INIT_WORK(&cp->work, hpsa_command_resubmit_worker);
+ queue_work_on(raw_smp_processor_id(),
+ h->resubmit_wq, &cp->work);
return;
}
}
@@ -3873,6 +3871,31 @@
return 0;
}
+static void hpsa_command_resubmit_worker(struct work_struct *work)
+{
+ struct scsi_cmnd *cmd;
+ struct hpsa_scsi_dev_t *dev;
+ struct CommandList *c =
+ container_of(work, struct CommandList, work);
+
+ cmd = c->scsi_cmd;
+ dev = cmd->device->hostdata;
+ if (!dev) {
+ cmd->result = DID_NO_CONNECT << 16;
+ cmd->scsi_done(cmd);
+ return;
+ }
+ if (hpsa_ciss_submit(c->h, c, cmd, dev->scsi3addr)) {
+ /*
+ * If we get here, it means dma mapping failed. Try
+ * again via scsi mid layer, which will then get
+ * SCSI_MLQUEUE_HOST_BUSY.
+ */
+ cmd->result = DID_IMM_RETRY << 16;
+ cmd->scsi_done(cmd);
+ }
+}
+
/* Running in struct Scsi_Host->host_lock less mode */
static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
{
@@ -6396,6 +6419,7 @@
int i;
struct CommandList *c = NULL;
+ flush_workqueue(h->resubmit_wq); /* ensure all cmds are fully built */
for (i = 0; i < h->nr_cmds; i++) {
if (!test_bit(i & (BITS_PER_LONG - 1),
h->cmd_pool_bits + (i / BITS_PER_LONG)))
@@ -6631,6 +6655,12 @@
spin_lock_init(&h->scan_lock);
spin_lock_init(&h->passthru_count_lock);
+ h->resubmit_wq = alloc_workqueue("hpsa", WQ_MEM_RECLAIM, 0);
+ if (!h->resubmit_wq) {
+ dev_err(&h->pdev->dev, "Failed to allocate work queue\n");
+ rc = -ENOMEM;
+ goto clean1;
+ }
/* Allocate and clear per-cpu variable lockup_detected */
h->lockup_detected = alloc_percpu(u32);
if (!h->lockup_detected) {
@@ -6763,6 +6793,8 @@
hpsa_free_irqs(h);
clean2:
clean1:
+ if (h->resubmit_wq)
+ destroy_workqueue(h->resubmit_wq);
if (h->lockup_detected)
free_percpu(h->lockup_detected);
kfree(h);
@@ -6838,9 +6870,9 @@
h->remove_in_progress = 1;
cancel_delayed_work(&h->monitor_ctlr_work);
spin_unlock_irqrestore(&h->lock, flags);
-
hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */
hpsa_shutdown(pdev);
+ destroy_workqueue(h->resubmit_wq);
iounmap(h->vaddr);
iounmap(h->transtable);
iounmap(h->cfgtable);