iio:pressure:ms5611: oversampling rate support
Add support for setting and retrieving OverSampling Rate independently for
each of the temperature and pressure channels. This allows userspace to
fine tune hardware sampling process according to the following tradeoffs :
* the higher the OSR, the finer the resolution ;
* the higher the OSR, the lower the noise ;
BUT:
* the higher the OSR, the larger the drift ;
* the higher the OSR, the longer the response time, i.e. less samples per
unit of time.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
diff --git a/drivers/iio/pressure/ms5611.h b/drivers/iio/pressure/ms5611.h
index 8b08e4b..d725a307 100644
--- a/drivers/iio/pressure/ms5611.h
+++ b/drivers/iio/pressure/ms5611.h
@@ -19,12 +19,6 @@
#define MS5611_RESET 0x1e
#define MS5611_READ_ADC 0x00
#define MS5611_READ_PROM_WORD 0xA0
-#define MS5611_START_TEMP_CONV 0x58
-#define MS5611_START_PRESSURE_CONV 0x48
-
-#define MS5611_CONV_TIME_MIN 9040
-#define MS5611_CONV_TIME_MAX 10000
-
#define MS5611_PROM_WORDS_NB 8
enum {
@@ -39,10 +33,24 @@
s32 *temp, s32 *pressure);
};
+/*
+ * OverSampling Rate descriptor.
+ * Warning: cmd MUST be kept aligned on a word boundary (see
+ * m5611_spi_read_adc_temp_and_pressure in ms5611_spi.c).
+ */
+struct ms5611_osr {
+ unsigned long conv_usec;
+ u8 cmd;
+ unsigned short rate;
+};
+
struct ms5611_state {
void *client;
struct mutex lock;
+ const struct ms5611_osr *pressure_osr;
+ const struct ms5611_osr *temp_osr;
+
int (*reset)(struct device *dev);
int (*read_prom_word)(struct device *dev, int index, u16 *word);
int (*read_adc_temp_and_pressure)(struct device *dev,