ALSA: hda - Add multiple headphone support to ALC262 codec
This patch changes the alc262 auto-parser to allow multiple pins
assigned for a single purpose (line-out, headphone or speaker).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index ee59df7..26069e3 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -11824,7 +11824,7 @@
}
static int alc262_add_out_vol_ctl(struct alc_spec *spec, hda_nid_t nid,
- const char *pfx, int *vbits)
+ const char *pfx, int *vbits, int idx)
{
unsigned long val;
int vbit;
@@ -11839,11 +11839,11 @@
val = HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT);
else
val = HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT);
- return add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL, pfx, val);
+ return __add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL, pfx, idx, val);
}
static int alc262_add_out_sw_ctl(struct alc_spec *spec, hda_nid_t nid,
- const char *pfx)
+ const char *pfx, int idx)
{
unsigned long val;
@@ -11853,7 +11853,7 @@
val = HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT);
else
val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
- return add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx, val);
+ return __add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx, idx, val);
}
/* add playback controls from the parsed DAC table */
@@ -11862,7 +11862,7 @@
{
const char *pfx;
int vbits;
- int err;
+ int i, err;
spec->multiout.num_dacs = 1; /* only use one dac */
spec->multiout.dac_nids = spec->private_dac_nids;
@@ -11872,39 +11872,52 @@
pfx = "Master";
else if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
pfx = "Speaker";
+ else if (cfg->line_out_type == AUTO_PIN_HP_OUT)
+ pfx = "Headphone";
else
pfx = "Front";
- err = alc262_add_out_sw_ctl(spec, cfg->line_out_pins[0], pfx);
- if (err < 0)
- return err;
- err = alc262_add_out_sw_ctl(spec, cfg->speaker_pins[0], "Speaker");
- if (err < 0)
- return err;
- err = alc262_add_out_sw_ctl(spec, cfg->hp_pins[0], "Headphone");
- if (err < 0)
- return err;
+ for (i = 0; i < 2; i++) {
+ err = alc262_add_out_sw_ctl(spec, cfg->line_out_pins[i], pfx, i);
+ if (err < 0)
+ return err;
+ if (cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) {
+ err = alc262_add_out_sw_ctl(spec, cfg->speaker_pins[i],
+ "Speaker", i);
+ if (err < 0)
+ return err;
+ }
+ if (cfg->line_out_type != AUTO_PIN_HP_OUT) {
+ err = alc262_add_out_sw_ctl(spec, cfg->hp_pins[i],
+ "Headphone", i);
+ if (err < 0)
+ return err;
+ }
+ }
vbits = alc262_check_volbit(cfg->line_out_pins[0]) |
alc262_check_volbit(cfg->speaker_pins[0]) |
alc262_check_volbit(cfg->hp_pins[0]);
if (vbits == 1 || vbits == 2)
pfx = "Master"; /* only one mixer is used */
- else if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
- pfx = "Speaker";
- else
- pfx = "Front";
vbits = 0;
- err = alc262_add_out_vol_ctl(spec, cfg->line_out_pins[0], pfx, &vbits);
- if (err < 0)
- return err;
- err = alc262_add_out_vol_ctl(spec, cfg->speaker_pins[0], "Speaker",
- &vbits);
- if (err < 0)
- return err;
- err = alc262_add_out_vol_ctl(spec, cfg->hp_pins[0], "Headphone",
- &vbits);
- if (err < 0)
- return err;
+ for (i = 0; i < 2; i++) {
+ err = alc262_add_out_vol_ctl(spec, cfg->line_out_pins[i], pfx,
+ &vbits, i);
+ if (err < 0)
+ return err;
+ if (cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) {
+ err = alc262_add_out_vol_ctl(spec, cfg->speaker_pins[i],
+ "Speaker", &vbits, i);
+ if (err < 0)
+ return err;
+ }
+ if (cfg->line_out_type != AUTO_PIN_HP_OUT) {
+ err = alc262_add_out_vol_ctl(spec, cfg->hp_pins[i],
+ "Headphone", &vbits, i);
+ if (err < 0)
+ return err;
+ }
+ }
return 0;
}