drm/tinydrm: Add MIPI DBI support
Add support for MIPI DBI compatible controllers.
Interface type C option 1 and 3 are supported (SPI).
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Thierry Reding <treding@nvidia.com>
diff --git a/include/drm/tinydrm/mipi-dbi.h b/include/drm/tinydrm/mipi-dbi.h
new file mode 100644
index 0000000..d137b16e
--- /dev/null
+++ b/include/drm/tinydrm/mipi-dbi.h
@@ -0,0 +1,107 @@
+/*
+ * MIPI Display Bus Interface (DBI) LCD controller support
+ *
+ * Copyright 2016 Noralf Trønnes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_MIPI_DBI_H
+#define __LINUX_MIPI_DBI_H
+
+#include <drm/tinydrm/tinydrm.h>
+
+struct spi_device;
+struct gpio_desc;
+struct regulator;
+
+/**
+ * struct mipi_dbi - MIPI DBI controller
+ * @tinydrm: tinydrm base
+ * @spi: SPI device
+ * @enabled: Pipeline is enabled
+ * @cmdlock: Command lock
+ * @command: Bus specific callback executing commands.
+ * @read_commands: Array of read commands terminated by a zero entry.
+ * Reading is disabled if this is NULL.
+ * @dc: Optional D/C gpio.
+ * @tx_buf: Buffer used for transfer (copy clip rect area)
+ * @tx_buf9: Buffer used for Option 1 9-bit conversion
+ * @tx_buf9_len: Size of tx_buf9.
+ * @swap_bytes: Swap bytes in buffer before transfer
+ * @reset: Optional reset gpio
+ * @rotation: initial rotation in degrees Counter Clock Wise
+ * @backlight: backlight device (optional)
+ * @regulator: power regulator (optional)
+ */
+struct mipi_dbi {
+ struct tinydrm_device tinydrm;
+ struct spi_device *spi;
+ bool enabled;
+ struct mutex cmdlock;
+ int (*command)(struct mipi_dbi *mipi, u8 cmd, u8 *param, size_t num);
+ const u8 *read_commands;
+ struct gpio_desc *dc;
+ u16 *tx_buf;
+ void *tx_buf9;
+ size_t tx_buf9_len;
+ bool swap_bytes;
+ struct gpio_desc *reset;
+ unsigned int rotation;
+ struct backlight_device *backlight;
+ struct regulator *regulator;
+};
+
+static inline struct mipi_dbi *
+mipi_dbi_from_tinydrm(struct tinydrm_device *tdev)
+{
+ return container_of(tdev, struct mipi_dbi, tinydrm);
+}
+
+int mipi_dbi_spi_init(struct spi_device *spi, struct mipi_dbi *mipi,
+ struct gpio_desc *dc,
+ const struct drm_simple_display_pipe_funcs *pipe_funcs,
+ struct drm_driver *driver,
+ const struct drm_display_mode *mode,
+ unsigned int rotation);
+int mipi_dbi_init(struct device *dev, struct mipi_dbi *mipi,
+ const struct drm_simple_display_pipe_funcs *pipe_funcs,
+ struct drm_driver *driver,
+ const struct drm_display_mode *mode, unsigned int rotation);
+void mipi_dbi_pipe_enable(struct drm_simple_display_pipe *pipe,
+ struct drm_crtc_state *crtc_state);
+void mipi_dbi_pipe_disable(struct drm_simple_display_pipe *pipe);
+void mipi_dbi_hw_reset(struct mipi_dbi *mipi);
+bool mipi_dbi_display_is_on(struct mipi_dbi *mipi);
+
+int mipi_dbi_command_read(struct mipi_dbi *mipi, u8 cmd, u8 *val);
+int mipi_dbi_command_buf(struct mipi_dbi *mipi, u8 cmd, u8 *data, size_t len);
+
+/**
+ * mipi_dbi_command - MIPI DCS command with optional parameter(s)
+ * @mipi: MIPI structure
+ * @cmd: Command
+ * @seq...: Optional parameter(s)
+ *
+ * Send MIPI DCS command to the controller. Use mipi_dbi_command_read() for
+ * get/read.
+ *
+ * Returns:
+ * Zero on success, negative error code on failure.
+ */
+#define mipi_dbi_command(mipi, cmd, seq...) \
+({ \
+ u8 d[] = { seq }; \
+ mipi_dbi_command_buf(mipi, cmd, d, ARRAY_SIZE(d)); \
+})
+
+#ifdef CONFIG_DEBUG_FS
+int mipi_dbi_debugfs_init(struct drm_minor *minor);
+#else
+#define mipi_dbi_debugfs_init NULL
+#endif
+
+#endif /* __LINUX_MIPI_DBI_H */