libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask()
Reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask() and
while at it relocate the function below ata_acpi_gtm_xfermask().
New ata_acpi_cbl_80wire() implementation takes @gtm, in both pata_via
and pata_amd, use the initial GTM value. Both are trying to peek
initial BIOS configuration, so using initial caching value makes
sense. This fixes ACPI part of cable detection in pata_amd which
previously always returned 0 because configuring PIO0 during reset
clears DMA configuration.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index a6f1a6b..9e8ec19 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -490,38 +490,29 @@
/**
* ata_acpi_cbl_80wire - Check for 80 wire cable
* @ap: Port to check
+ * @gtm: GTM data to use
*
- * Return 1 if the ACPI mode data for this port indicates the BIOS selected
- * an 80wire mode.
+ * Return 1 if the @gtm indicates the BIOS selected an 80wire mode.
*/
-
-int ata_acpi_cbl_80wire(struct ata_port *ap)
+int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm)
{
- const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
- int valid = 0;
+ struct ata_device *dev;
- if (!gtm)
- return 0;
+ ata_link_for_each_dev(dev, &ap->link) {
+ unsigned long xfer_mask, udma_mask;
- /* Split timing, DMA enabled */
- if ((gtm->flags & 0x11) == 0x11 && gtm->drive[0].dma < 55)
- valid |= 1;
- if ((gtm->flags & 0x14) == 0x14 && gtm->drive[1].dma < 55)
- valid |= 2;
- /* Shared timing, DMA enabled */
- if ((gtm->flags & 0x11) == 0x01 && gtm->drive[0].dma < 55)
- valid |= 1;
- if ((gtm->flags & 0x14) == 0x04 && gtm->drive[0].dma < 55)
- valid |= 2;
+ if (!ata_dev_enabled(dev))
+ continue;
- /* Drive check */
- if ((valid & 1) && ata_dev_enabled(&ap->link.device[0]))
- return 1;
- if ((valid & 2) && ata_dev_enabled(&ap->link.device[1]))
- return 1;
+ xfer_mask = ata_acpi_gtm_xfermask(dev, gtm);
+ ata_unpack_xfermask(xfer_mask, NULL, NULL, &udma_mask);
+
+ if (udma_mask & ~ATA_UDMA_MASK_40C)
+ return 1;
+ }
+
return 0;
}
-
EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire);
static void ata_acpi_gtf_to_tf(struct ata_device *dev,