clk: meson: mpll: add rw operation
This patch adds new callbacks to the meson-mpll driver to control
and set the pll rate. For this, we also need to add the enable bit and
sdm enable bit. The corresponding parameters are added to mpll data
structure.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20170309104154.28295-6-jbrunet@baylibre.com
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 79e9313..79fb898 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -441,11 +441,21 @@ static struct meson_clk_mpll gxbb_mpll0 = {
.shift = 0,
.width = 14,
},
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 15,
+ .width = 1,
+ },
.n2 = {
.reg_off = HHI_MPLL_CNTL7,
.shift = 16,
.width = 9,
},
+ .en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 14,
+ .width = 1,
+ },
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll0",
@@ -461,11 +471,21 @@ static struct meson_clk_mpll gxbb_mpll1 = {
.shift = 0,
.width = 14,
},
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 15,
+ .width = 1,
+ },
.n2 = {
.reg_off = HHI_MPLL_CNTL8,
.shift = 16,
.width = 9,
},
+ .en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 14,
+ .width = 1,
+ },
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll1",
@@ -481,11 +501,21 @@ static struct meson_clk_mpll gxbb_mpll2 = {
.shift = 0,
.width = 14,
},
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 15,
+ .width = 1,
+ },
.n2 = {
.reg_off = HHI_MPLL_CNTL9,
.shift = 16,
.width = 9,
},
+ .en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 14,
+ .width = 1,
+ },
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll2",