ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet reset
DW ethernet controller on axs10x hangs sometimes after SW reset.
Invoke the newly aded driver (reset-axs10x.c) by adding the DT bits.
With this in place, we don't need the open-coded quirk in platform
code, so get rid of it as well !
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index e114000..74d070c 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -16,6 +16,12 @@
ranges = <0x00000000 0x0 0xe0000000 0x10000000>;
interrupt-parent = <&mb_intc>;
+ creg_rst: reset-controller@11220 {
+ compatible = "snps,axs10x-reset";
+ #reset-cells = <1>;
+ reg = <0x11220 0x4>;
+ };
+
i2sclk: i2sclk@100a0 {
compatible = "snps,axs10x-i2s-pll-clock";
reg = <0x100a0 0x10>;
@@ -73,6 +79,8 @@
clocks = <&apbclk>;
clock-names = "stmmaceth";
max-speed = <100>;
+ resets = <&creg_rst 5>;
+ reset-names = "stmmaceth";
};
ehci@0x40000 {
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index cf14ebc..f1ac679 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -111,13 +111,6 @@ static void __init axs10x_early_init(void)
axs10x_enable_gpio_intc_wire();
- /*
- * Reset ethernet IP core.
- * TODO: get rid of this quirk after axs10x reset driver (or simple
- * reset driver) will be available in upstream.
- */
- iowrite32((1 << 5), (void __iomem *) CREG_MB_SW_RESET);
-
scnprintf(mb, 32, "MainBoard v%d", mb_rev);
axs10x_print_board_ver(CREG_MB_VER, mb);
}