[PATCH] s3c2410fb: Platform support for ARM S3C2410 framebuffer driver
This patch add the plateform specific stuff needed to configure and use the
driver.
Signed-Off-By: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ben Dooks <ben@trinity.fluff.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index ea4fb1a..6ff1889 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -45,6 +45,9 @@
//#include <asm/debug-ll.h>
#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/fb.h>
#include <linux/serial_core.h>
@@ -88,6 +91,48 @@
+/**
+ * Set lcd on or off
+ **/
+static struct s3c2410fb_mach_info h1940_lcdcfg __initdata = {
+ .fixed_syncs= 1,
+ .regs={
+ .lcdcon1= S3C2410_LCDCON1_TFT16BPP | \
+ S3C2410_LCDCON1_TFT | \
+ S3C2410_LCDCON1_CLKVAL(0x0C),
+
+ .lcdcon2= S3C2410_LCDCON2_VBPD(7) | \
+ S3C2410_LCDCON2_LINEVAL(319) | \
+ S3C2410_LCDCON2_VFPD(6) | \
+ S3C2410_LCDCON2_VSPW(0),
+
+ .lcdcon3= S3C2410_LCDCON3_HBPD(19) | \
+ S3C2410_LCDCON3_HOZVAL(239) | \
+ S3C2410_LCDCON3_HFPD(7),
+
+ .lcdcon4= S3C2410_LCDCON4_MVAL(0) | \
+ S3C2410_LCDCON4_HSPW(3),
+
+ .lcdcon5= S3C2410_LCDCON5_FRM565 | \
+ S3C2410_LCDCON5_INVVLINE | \
+ S3C2410_LCDCON5_HWSWP,
+ },
+ .lpcsel= 0x02,
+ .gpccon= 0xaa940659,
+ .gpccon_mask= 0xffffffff,
+ .gpcup= 0x0000ffff,
+ .gpcup_mask= 0xffffffff,
+ .gpdcon= 0xaa84aaa0,
+ .gpdcon_mask= 0xffffffff,
+ .gpdup= 0x0000faff,
+ .gpdup_mask= 0xffffffff,
+
+ .width= 240,
+ .height= 320,
+ .xres= {240,240,240},
+ .yres= {320,320,320},
+ .bpp= {16,16,16},
+};
static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_usb,
@@ -116,6 +161,11 @@
}
+void __init h1940_init(void)
+{
+ set_s3c2410fb_info(&h1940_lcdcfg);
+}
+
MACHINE_START(H1940, "IPAQ-H1940")
/* Maintainer: Ben Dooks <ben@fluff.org> */
.phys_ram = S3C2410_SDRAM_PA,
@@ -124,5 +174,6 @@
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = h1940_map_io,
.init_irq = h1940_init_irq,
+ .init_machine = h1940_init,
.timer = &s3c24xx_timer,
MACHINE_END