hwmon: (via686a) Initialize fan_div values
Functions set_fan_min() and set_fan_div() assume that the fan_div
values have already been read from the register. The driver currently
doesn't initialize them at load time, they are only set when function
via686a_update_device() is called. This means that set_fan_min() and
set_fan_div() misbehave if, for example, "sensors -s" is called
before any monitoring application (e.g. "sensors") is has been run.
Fix the problem by always initializing the fan_div values at device
bind time.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 13e8d21..25e9166 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -689,6 +689,13 @@
return 0;
}
+static void via686a_update_fan_div(struct via686a_data *data)
+{
+ int reg = via686a_read_value(data, VIA686A_REG_FANDIV);
+ data->fan_div[0] = (reg >> 4) & 0x03;
+ data->fan_div[1] = reg >> 6;
+}
+
static void __devinit via686a_init_device(struct via686a_data *data)
{
u8 reg;
@@ -702,6 +709,9 @@
via686a_write_value(data, VIA686A_REG_TEMP_MODE,
(reg & ~VIA686A_TEMP_MODE_MASK)
| VIA686A_TEMP_MODE_CONTINUOUS);
+
+ /* Pre-read fan clock divisor values */
+ via686a_update_fan_div(data);
}
static struct via686a_data *via686a_update_device(struct device *dev)
@@ -753,9 +763,7 @@
(via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
0xc0) >> 6;
- i = via686a_read_value(data, VIA686A_REG_FANDIV);
- data->fan_div[0] = (i >> 4) & 0x03;
- data->fan_div[1] = i >> 6;
+ via686a_update_fan_div(data);
data->alarms =
via686a_read_value(data,
VIA686A_REG_ALARM1) |