[MIPS] TXx9: Make single kernel can support multiple boards
Make single kernel can be used on RBTX4927/37/38. Also make
some SoC-specific code independent from board-specific code.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index b8cdb19..b92a134 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -1,11 +1,89 @@
+config TOSHIBA_JMR3927
+ bool "Toshiba JMR-TX3927 board"
+ depends on MACH_TX39XX
+ select SOC_TX3927
+
+config TOSHIBA_RBTX4927
+ bool "Toshiba RBTX49[23]7 board"
+ depends on MACH_TX49XX
+ select SOC_TX4927
+ help
+ This Toshiba board is based on the TX4927 processor. Say Y here to
+ support this machine type
+
+config TOSHIBA_RBTX4938
+ bool "Toshiba RBTX4938 board"
+ depends on MACH_TX49XX
+ select SOC_TX4938
+ help
+ This Toshiba board is based on the TX4938 processor. Say Y here to
+ support this machine type
+
+config SOC_TX3927
+ bool
+ select CEVT_TXX9
+ select DMA_NONCOHERENT
+ select HAS_TXX9_SERIAL
+ select HW_HAS_PCI
+ select IRQ_TXX9
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_TX39XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select GPIO_TXX9
+
+config SOC_TX4927
+ bool
+ select CEVT_R4K
+ select CSRC_R4K
+ select CEVT_TXX9
+ select DMA_NONCOHERENT
+ select HAS_TXX9_SERIAL
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_TXX9
+ select PCI_TX4927
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_TX49XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_KGDB
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select GPIO_TXX9
+
+config SOC_TX4938
+ bool
+ select CEVT_R4K
+ select CSRC_R4K
+ select CEVT_TXX9
+ select DMA_NONCOHERENT
+ select HAS_TXX9_SERIAL
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_TXX9
+ select PCI_TX4927
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_TX49XX
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_KGDB
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select GPIO_TXX9
+
config TOSHIBA_FPCIB0
bool "FPCIB0 Backplane Support"
- depends on PCI && (SYS_HAS_CPU_TX49XX || SYS_HAS_CPU_TX39XX)
+ depends on PCI && (MACH_TX39XX || MACH_TX49XX)
select I8259
config PICMG_PCI_BACKPLANE_DEFAULT
bool "Support for PICMG PCI Backplane"
- depends on PCI && (SYS_HAS_CPU_TX49XX || SYS_HAS_CPU_TX39XX)
+ depends on PCI && (MACH_TX39XX || MACH_TX49XX)
default y if !TOSHIBA_FPCIB0
if TOSHIBA_RBTX4938