ARM: plat-iop: move the GPIO driver to drivers/gpio
Move the IOP GPIO driver to live with its siblings in the
GPIO subsystem.
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b6ed304..cc30426 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -320,6 +320,15 @@
If unsure, say N.
+config GPIO_IOP
+ tristate "Intel IOP GPIO"
+ depends on ARM && (ARCH_IOP32X || ARCH_IOP33X)
+ help
+ Say yes here to support the GPIO functionality of a number of Intel
+ IOP32X or IOP33X.
+
+ If unsure, say N.
+
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
depends on PCI
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 98e23eb..06e5662 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -28,6 +28,7 @@
obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
+obj-$(CONFIG_GPIO_IOP) += gpio-iop.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
diff --git a/drivers/gpio/gpio-iop.c b/drivers/gpio/gpio-iop.c
new file mode 100644
index 0000000..697de6d
--- /dev/null
+++ b/drivers/gpio/gpio-iop.c
@@ -0,0 +1,93 @@
+/*
+ * arch/arm/plat-iop/gpio.c
+ * GPIO handling for Intel IOP3xx processors.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/export.h>
+#include <asm/hardware/iop3xx.h>
+#include <mach/gpio.h>
+
+void gpio_line_config(int line, int direction)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (direction == GPIO_IN) {
+ *IOP3XX_GPOE |= 1 << line;
+ } else if (direction == GPIO_OUT) {
+ *IOP3XX_GPOE &= ~(1 << line);
+ }
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_config);
+
+int gpio_line_get(int line)
+{
+ return !!(*IOP3XX_GPID & (1 << line));
+}
+EXPORT_SYMBOL(gpio_line_get);
+
+void gpio_line_set(int line, int value)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (value == GPIO_LOW) {
+ *IOP3XX_GPOD &= ~(1 << line);
+ } else if (value == GPIO_HIGH) {
+ *IOP3XX_GPOD |= 1 << line;
+ }
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_set);
+
+static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ gpio_line_config(gpio, GPIO_IN);
+ return 0;
+}
+
+static int iop3xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
+{
+ gpio_line_set(gpio, level);
+ gpio_line_config(gpio, GPIO_OUT);
+ return 0;
+}
+
+static int iop3xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ return gpio_line_get(gpio);
+}
+
+static void iop3xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ gpio_line_set(gpio, value);
+}
+
+static struct gpio_chip iop3xx_chip = {
+ .label = "iop3xx",
+ .direction_input = iop3xx_gpio_direction_input,
+ .get = iop3xx_gpio_get_value,
+ .direction_output = iop3xx_gpio_direction_output,
+ .set = iop3xx_gpio_set_value,
+ .base = 0,
+ .ngpio = IOP3XX_N_GPIOS,
+};
+
+static int __init iop3xx_gpio_setup(void)
+{
+ return gpiochip_add(&iop3xx_chip);
+}
+arch_initcall(iop3xx_gpio_setup);