pcmcia: use dev_printk and dev_dbg in yenta_socket
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 0ab1fb6..3ecd7c9 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -38,11 +38,7 @@
module_param(pwr_irqs_off, bool, 0644);
MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!");
-#if 0
-#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
-#else
-#define debug(x,args...)
-#endif
+#define debug(x, s, args...) dev_dbg(&s->dev->dev, x, ##args)
/* Don't ask.. */
#define to_cycles(ns) ((ns)/120)
@@ -69,13 +65,13 @@
static inline u32 cb_readl(struct yenta_socket *socket, unsigned reg)
{
u32 val = readl(socket->base + reg);
- debug("%p %04x %08x\n", socket, reg, val);
+ debug("%04x %08x\n", socket, reg, val);
return val;
}
static inline void cb_writel(struct yenta_socket *socket, unsigned reg, u32 val)
{
- debug("%p %04x %08x\n", socket, reg, val);
+ debug("%04x %08x\n", socket, reg, val);
writel(val, socket->base + reg);
readl(socket->base + reg); /* avoid problems with PCI write posting */
}
@@ -84,7 +80,7 @@
{
u8 val;
pci_read_config_byte(socket->dev, offset, &val);
- debug("%p %04x %02x\n", socket, offset, val);
+ debug("%04x %02x\n", socket, offset, val);
return val;
}
@@ -92,7 +88,7 @@
{
u16 val;
pci_read_config_word(socket->dev, offset, &val);
- debug("%p %04x %04x\n", socket, offset, val);
+ debug("%04x %04x\n", socket, offset, val);
return val;
}
@@ -100,32 +96,32 @@
{
u32 val;
pci_read_config_dword(socket->dev, offset, &val);
- debug("%p %04x %08x\n", socket, offset, val);
+ debug("%04x %08x\n", socket, offset, val);
return val;
}
static inline void config_writeb(struct yenta_socket *socket, unsigned offset, u8 val)
{
- debug("%p %04x %02x\n", socket, offset, val);
+ debug("%04x %02x\n", socket, offset, val);
pci_write_config_byte(socket->dev, offset, val);
}
static inline void config_writew(struct yenta_socket *socket, unsigned offset, u16 val)
{
- debug("%p %04x %04x\n", socket, offset, val);
+ debug("%04x %04x\n", socket, offset, val);
pci_write_config_word(socket->dev, offset, val);
}
static inline void config_writel(struct yenta_socket *socket, unsigned offset, u32 val)
{
- debug("%p %04x %08x\n", socket, offset, val);
+ debug("%04x %08x\n", socket, offset, val);
pci_write_config_dword(socket->dev, offset, val);
}
static inline u8 exca_readb(struct yenta_socket *socket, unsigned reg)
{
u8 val = readb(socket->base + 0x800 + reg);
- debug("%p %04x %02x\n", socket, reg, val);
+ debug("%04x %02x\n", socket, reg, val);
return val;
}
@@ -134,20 +130,20 @@
u16 val;
val = readb(socket->base + 0x800 + reg);
val |= readb(socket->base + 0x800 + reg + 1) << 8;
- debug("%p %04x %04x\n", socket, reg, val);
+ debug("%04x %04x\n", socket, reg, val);
return val;
}
static inline void exca_writeb(struct yenta_socket *socket, unsigned reg, u8 val)
{
- debug("%p %04x %02x\n", socket, reg, val);
+ debug("%04x %02x\n", socket, reg, val);
writeb(val, socket->base + 0x800 + reg);
readb(socket->base + 0x800 + reg); /* PCI write posting... */
}
static void exca_writew(struct yenta_socket *socket, unsigned reg, u16 val)
{
- debug("%p %04x %04x\n", socket, reg, val);
+ debug("%04x %04x\n", socket, reg, val);
writeb(val, socket->base + 0x800 + reg);
writeb(val >> 8, socket->base + 0x800 + reg + 1);
@@ -207,7 +203,7 @@
if (state & CB_CBCARD) {
- val |= SS_CARDBUS;
+ val |= SS_CARDBUS;
val |= (state & CB_CARDSTS) ? SS_STSCHG : 0;
val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? 0 : SS_DETECT;
val |= (state & CB_PWRCYCLE) ? SS_POWERON | SS_READY : 0;
@@ -650,8 +646,10 @@
root = pci_find_parent_resource(socket->dev, res);
if (root && (request_resource(root, res) == 0))
return 0;
- printk(KERN_INFO "yenta %s: Preassigned resource %d busy or not available, reconfiguring...\n",
- pci_name(socket->dev), nr);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Preassigned resource %d busy or not available, "
+ "reconfiguring...\n",
+ nr);
}
if (type & IORESOURCE_IO) {
@@ -674,8 +672,9 @@
return 1;
}
- printk(KERN_INFO "yenta %s: no resource of type %x available, trying to continue...\n",
- pci_name(socket->dev), type);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "no resource of type %x available, trying to continue...\n",
+ type);
res->start = res->end = res->flags = 0;
return 0;
}
@@ -923,7 +922,8 @@
socket->probe_status = 0;
if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) {
- printk(KERN_WARNING "Yenta: request_irq() in yenta_probe_cb_irq() failed!\n");
+ dev_printk(KERN_WARNING, &socket->dev->dev,
+ "request_irq() in yenta_probe_cb_irq() failed!\n");
return -1;
}
@@ -960,8 +960,9 @@
else
socket->socket.irq_mask = 0;
- printk(KERN_INFO "Yenta: ISA IRQ mask 0x%04x, PCI irq %d\n",
- socket->socket.irq_mask, socket->cb_irq);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "ISA IRQ mask 0x%04x, PCI irq %d\n",
+ socket->socket.irq_mask, socket->cb_irq);
}
/*
@@ -1051,8 +1052,9 @@
/* Show that the wanted subordinate number is not possible: */
if (cardbus_bridge->subordinate > upper_limit)
- printk(KERN_WARNING "Yenta: Upper limit for fixing this "
- "bridge's parent bridge: #%02x\n", upper_limit);
+ dev_printk(KERN_WARNING, &cardbus_bridge->dev,
+ "Upper limit for fixing this "
+ "bridge's parent bridge: #%02x\n", upper_limit);
/* If we have room to increase the bridge's subordinate number, */
if (bridge_to_fix->subordinate < upper_limit) {
@@ -1061,10 +1063,11 @@
unsigned char subordinate_to_assign =
min(cardbus_bridge->subordinate, upper_limit);
- printk(KERN_INFO "Yenta: Raising subordinate bus# of parent "
- "bus (#%02x) from #%02x to #%02x\n",
- bridge_to_fix->number,
- bridge_to_fix->subordinate, subordinate_to_assign);
+ dev_printk(KERN_INFO, &bridge_to_fix->dev,
+ "Raising subordinate bus# of parent "
+ "bus (#%02x) from #%02x to #%02x\n",
+ bridge_to_fix->number,
+ bridge_to_fix->subordinate, subordinate_to_assign);
/* Save the new subordinate in the bus struct of the bridge */
bridge_to_fix->subordinate = subordinate_to_assign;
@@ -1091,8 +1094,8 @@
* Bail out if so.
*/
if (!dev->subordinate) {
- printk(KERN_ERR "Yenta: no bus associated with %s! "
- "(try 'pci=assign-busses')\n", pci_name(dev));
+ dev_printk(KERN_ERR, &dev->dev, "no bus associated! "
+ "(try 'pci=assign-busses')\n");
return -ENODEV;
}
@@ -1127,7 +1130,7 @@
goto disable;
if (!pci_resource_start(dev, 0)) {
- printk(KERN_ERR "No cardbus resource!\n");
+ dev_printk(KERN_ERR, &dev->dev, "No cardbus resource!\n");
ret = -ENODEV;
goto release;
}
@@ -1146,8 +1149,8 @@
* report the subsystem vendor and device for help debugging
* the irq stuff...
*/
- printk(KERN_INFO "Yenta: CardBus bridge found at %s [%04x:%04x]\n",
- pci_name(dev), dev->subsystem_vendor, dev->subsystem_device);
+ dev_printk(KERN_INFO, &dev->dev, "CardBus bridge found [%04x:%04x]\n",
+ dev->subsystem_vendor, dev->subsystem_device);
yenta_config_init(socket);
@@ -1179,8 +1182,12 @@
socket->poll_timer.data = (unsigned long)socket;
socket->poll_timer.expires = jiffies + HZ;
add_timer(&socket->poll_timer);
- printk(KERN_INFO "Yenta: no PCI IRQ, CardBus support disabled for this socket.\n"
- KERN_INFO "Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.\n");
+ dev_printk(KERN_INFO, &dev->dev,
+ "no PCI IRQ, CardBus support disabled for this "
+ "socket.\n");
+ dev_printk(KERN_INFO, &dev->dev,
+ "check your BIOS CardBus, BIOS IRQ or ACPI "
+ "settings.\n");
} else {
socket->socket.features |= SS_CAP_CARDBUS;
}
@@ -1188,7 +1195,8 @@
/* Figure out what the dang thing can do for the PCMCIA layer... */
yenta_interrogate(socket);
yenta_get_socket_capabilities(socket, isa_interrupts);
- printk(KERN_INFO "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+ dev_printk(KERN_INFO, &dev->dev,
+ "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
yenta_fixup_parent_bridge(dev->subordinate);