PCI: Add DMA alias quirk for Adaptec 3405
The Adaptec 3405 is actually an Intel 80333 I/O processor where the exposed
device at 0e.0 is actually the address translation unit of the I/O
processor and a hidden, private device at 01.0 masters the DMA for the
device. Create a fixed alias between the exposed and hidden devfn so we
can enable the IOMMU.
Scenarios like this are potentially likely for any device incorporating
this I/O processor, so this little bit of abstraction with the fixed alias
table should make future additions trivial.
Without this fix, booting a system with the Intel IOMMU enabled and an
Adaptec 3405 at 02:0e.0 results in a flood of errors like this:
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Write] Request device [02:01.0] fault addr ffbff000
DMAR:[fault reason 02] Present bit in context entry is clear
[bhelgaas: changelog, comment]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Adaptec OEM Raid Solutions <aacraid@adaptec.com>
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 3fb378aa..45bd870 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3563,6 +3563,44 @@
quirk_dma_func1_alias);
/*
+ * Some devices DMA with the wrong devfn, not just the wrong function.
+ * quirk_fixed_dma_alias() uses this table to create fixed aliases, where
+ * the alias is "fixed" and independent of the device devfn.
+ *
+ * For example, the Adaptec 3405 is a PCIe card with an Intel 80333 I/O
+ * processor. To software, this appears as a PCIe-to-PCI/X bridge with a
+ * single device on the secondary bus. In reality, the single exposed
+ * device at 0e.0 is the Address Translation Unit (ATU) of the controller
+ * that provides a bridge to the internal bus of the I/O processor. The
+ * controller supports private devices, which can be hidden from PCI config
+ * space. In the case of the Adaptec 3405, a private device at 01.0
+ * appears to be the DMA engine, which therefore needs to become a DMA
+ * alias for the device.
+ */
+static const struct pci_device_id fixed_dma_alias_tbl[] = {
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285,
+ PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */
+ .driver_data = PCI_DEVFN(1, 0) },
+ { 0 }
+};
+
+static void quirk_fixed_dma_alias(struct pci_dev *dev)
+{
+ const struct pci_device_id *id;
+
+ id = pci_match_id(fixed_dma_alias_tbl, dev);
+ if (id) {
+ dev->dma_alias_devfn = id->driver_data;
+ dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN;
+ dev_info(&dev->dev, "Enabling fixed DMA alias to %02x.%d\n",
+ PCI_SLOT(dev->dma_alias_devfn),
+ PCI_FUNC(dev->dma_alias_devfn));
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADAPTEC2, 0x0285, quirk_fixed_dma_alias);
+
+/*
* A few PCIe-to-PCI bridges fail to expose a PCIe capability, resulting in
* using the wrong DMA alias for the device. Some of these devices can be
* used as either forward or reverse bridges, so we need to test whether the