ARM: tegra: pm: add platform suspend support
Adding suspend to RAM support for Tegra platform. There are three suspend
mode for Tegra. The difference were below.
* LP2: CPU voltage off
* LP1: CPU voltage off, DRAM in self-refresh
* LP0: CPU + Core voltage off, DRAM in self-refresh
After this patch, the LP2 suspend mode will be supported.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 5f5611f..3a3318a 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -22,6 +22,7 @@
#include <linux/cpumask.h>
#include <linux/delay.h>
#include <linux/cpu_pm.h>
+#include <linux/suspend.h>
#include <linux/err.h>
#include <linux/clk/tegra.h>
@@ -38,14 +39,10 @@
#include "fuse.h"
#include "pmc.h"
#include "sleep.h"
-
-#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */
-
-#define PMC_CTRL 0x0
+#include "pmc.h"
#ifdef CONFIG_PM_SLEEP
static DEFINE_SPINLOCK(tegra_lp2_lock);
-static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
void (*tegra_tear_down_cpu)(void);
/*
@@ -145,14 +142,7 @@
void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time)
{
- u32 mode;
-
- /* Only the last cpu down does the final suspend steps */
- mode = readl(pmc + PMC_CTRL);
- mode |= TEGRA_POWER_CPU_PWRREQ_OE;
- writel(mode, pmc + PMC_CTRL);
-
- set_power_timers(cpu_on_time, cpu_off_time);
+ tegra_pmc_pm_set(TEGRA_SUSPEND_LP2);
cpu_cluster_pm_enter();
suspend_cpu_complex();
@@ -162,4 +152,81 @@
restore_cpu_complex();
cpu_cluster_pm_exit();
}
+
+enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
+ enum tegra_suspend_mode mode)
+{
+ /* Tegra114 didn't support any suspending mode yet. */
+ if (tegra_chip_id == TEGRA114)
+ return TEGRA_SUSPEND_NONE;
+
+ /*
+ * The Tegra devices only support suspending to LP2 currently.
+ */
+ if (mode > TEGRA_SUSPEND_LP2)
+ return TEGRA_SUSPEND_LP2;
+
+ return mode;
+}
+
+static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = {
+ [TEGRA_SUSPEND_NONE] = "none",
+ [TEGRA_SUSPEND_LP2] = "LP2",
+ [TEGRA_SUSPEND_LP1] = "LP1",
+ [TEGRA_SUSPEND_LP0] = "LP0",
+};
+
+static int __cpuinit tegra_suspend_enter(suspend_state_t state)
+{
+ enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
+
+ if (WARN_ON(mode < TEGRA_SUSPEND_NONE ||
+ mode >= TEGRA_MAX_SUSPEND_MODE))
+ return -EINVAL;
+
+ pr_info("Entering suspend state %s\n", lp_state[mode]);
+
+ tegra_pmc_pm_set(mode);
+
+ local_fiq_disable();
+
+ suspend_cpu_complex();
+ switch (mode) {
+ case TEGRA_SUSPEND_LP2:
+ tegra_set_cpu_in_lp2(0);
+ break;
+ default:
+ break;
+ }
+
+ cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
+
+ switch (mode) {
+ case TEGRA_SUSPEND_LP2:
+ tegra_clear_cpu_in_lp2(0);
+ break;
+ default:
+ break;
+ }
+ restore_cpu_complex();
+
+ local_fiq_enable();
+
+ return 0;
+}
+
+static const struct platform_suspend_ops tegra_suspend_ops = {
+ .valid = suspend_valid_only_mem,
+ .enter = tegra_suspend_enter,
+};
+
+void __init tegra_init_suspend(void)
+{
+ if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NONE)
+ return;
+
+ tegra_pmc_suspend_init();
+
+ suspend_set_ops(&tegra_suspend_ops);
+}
#endif