spi: spidev_test: Add support for Dual/Quad SPI Transfers
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c
index efd7385..3a2f9d5 100644
--- a/Documentation/spi/spidev_test.c
+++ b/Documentation/spi/spidev_test.c
@@ -30,7 +30,7 @@
}
static const char *device = "/dev/spidev1.1";
-static uint8_t mode;
+static uint32_t mode;
static uint8_t bits = 8;
static uint32_t speed = 500000;
static uint16_t delay;
@@ -57,6 +57,21 @@
.bits_per_word = bits,
};
+ if (mode & SPI_TX_QUAD)
+ tr.tx_nbits = 4;
+ else if (mode & SPI_TX_DUAL)
+ tr.tx_nbits = 2;
+ if (mode & SPI_RX_QUAD)
+ tr.rx_nbits = 4;
+ else if (mode & SPI_RX_DUAL)
+ tr.rx_nbits = 2;
+ if (!(mode & SPI_LOOP)) {
+ if (mode & (SPI_TX_QUAD | SPI_TX_DUAL))
+ tr.rx_buf = 0;
+ else if (mode & (SPI_RX_QUAD | SPI_RX_DUAL))
+ tr.tx_buf = 0;
+ }
+
ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
if (ret < 1)
pabort("can't send spi message");
@@ -83,7 +98,9 @@
" -C --cs-high chip select active high\n"
" -3 --3wire SI/SO signals shared\n"
" -N --no-cs no chip select\n"
- " -R --ready slave pulls low to pause\n");
+ " -R --ready slave pulls low to pause\n"
+ " -2 --dual dual transfer\n"
+ " -4 --quad quad transfer\n");
exit(1);
}
@@ -103,11 +120,13 @@
{ "3wire", 0, 0, '3' },
{ "no-cs", 0, 0, 'N' },
{ "ready", 0, 0, 'R' },
+ { "dual", 0, 0, '2' },
+ { "quad", 0, 0, '4' },
{ NULL, 0, 0, 0 },
};
int c;
- c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL);
+ c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24", lopts, NULL);
if (c == -1)
break;
@@ -149,11 +168,23 @@
case 'R':
mode |= SPI_READY;
break;
+ case '2':
+ mode |= SPI_TX_DUAL;
+ break;
+ case '4':
+ mode |= SPI_TX_QUAD;
+ break;
default:
print_usage(argv[0]);
break;
}
}
+ if (mode & SPI_LOOP) {
+ if (mode & SPI_TX_DUAL)
+ mode |= SPI_RX_DUAL;
+ if (mode & SPI_TX_QUAD)
+ mode |= SPI_RX_QUAD;
+ }
}
int main(int argc, char *argv[])
@@ -170,11 +201,11 @@
/*
* spi mode
*/
- ret = ioctl(fd, SPI_IOC_WR_MODE, &mode);
+ ret = ioctl(fd, SPI_IOC_WR_MODE32, &mode);
if (ret == -1)
pabort("can't set spi mode");
- ret = ioctl(fd, SPI_IOC_RD_MODE, &mode);
+ ret = ioctl(fd, SPI_IOC_RD_MODE32, &mode);
if (ret == -1)
pabort("can't get spi mode");
@@ -200,7 +231,7 @@
if (ret == -1)
pabort("can't get max speed hz");
- printf("spi mode: %d\n", mode);
+ printf("spi mode: 0x%x\n", mode);
printf("bits per word: %d\n", bits);
printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000);