Merge branch 'mkp-fixes' into fixes
diff --git a/MAINTAINERS b/MAINTAINERS
index e9caa4b..8174cc2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9411,8 +9411,10 @@
SCSI SUBSYSTEM
M: "James E.J. Bottomley" <JBottomley@odin.com>
-L: linux-scsi@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git
+M: "Martin K. Petersen" <martin.petersen@oracle.com>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
+L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/
F: include/scsi/
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 7d8f129..dd49735 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -91,7 +91,8 @@
lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
lim->virt_boundary_mask = 0;
lim->max_segment_size = BLK_MAX_SEGMENT_SIZE;
- lim->max_sectors = lim->max_hw_sectors = BLK_SAFE_MAX_SECTORS;
+ lim->max_sectors = lim->max_dev_sectors = lim->max_hw_sectors =
+ BLK_SAFE_MAX_SECTORS;
lim->chunk_sectors = 0;
lim->max_write_same_sectors = 0;
lim->max_discard_sectors = 0;
@@ -127,6 +128,7 @@
lim->max_hw_sectors = UINT_MAX;
lim->max_segment_size = UINT_MAX;
lim->max_sectors = UINT_MAX;
+ lim->max_dev_sectors = UINT_MAX;
lim->max_write_same_sectors = UINT_MAX;
}
EXPORT_SYMBOL(blk_set_stacking_limits);
@@ -214,8 +216,8 @@
EXPORT_SYMBOL(blk_queue_bounce_limit);
/**
- * blk_limits_max_hw_sectors - set hard and soft limit of max sectors for request
- * @limits: the queue limits
+ * blk_queue_max_hw_sectors - set max sectors for a request for this queue
+ * @q: the request queue for the device
* @max_hw_sectors: max hardware sectors in the usual 512b unit
*
* Description:
@@ -224,13 +226,19 @@
* the device driver based upon the capabilities of the I/O
* controller.
*
+ * max_dev_sectors is a hard limit imposed by the storage device for
+ * READ/WRITE requests. It is set by the disk driver.
+ *
* max_sectors is a soft limit imposed by the block layer for
* filesystem type requests. This value can be overridden on a
* per-device basis in /sys/block/<device>/queue/max_sectors_kb.
* The soft limit can not exceed max_hw_sectors.
**/
-void blk_limits_max_hw_sectors(struct queue_limits *limits, unsigned int max_hw_sectors)
+void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
{
+ struct queue_limits *limits = &q->limits;
+ unsigned int max_sectors;
+
if ((max_hw_sectors << 9) < PAGE_CACHE_SIZE) {
max_hw_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
printk(KERN_INFO "%s: set to minimum %d\n",
@@ -238,22 +246,9 @@
}
limits->max_hw_sectors = max_hw_sectors;
- limits->max_sectors = min_t(unsigned int, max_hw_sectors,
- BLK_DEF_MAX_SECTORS);
-}
-EXPORT_SYMBOL(blk_limits_max_hw_sectors);
-
-/**
- * blk_queue_max_hw_sectors - set max sectors for a request for this queue
- * @q: the request queue for the device
- * @max_hw_sectors: max hardware sectors in the usual 512b unit
- *
- * Description:
- * See description for blk_limits_max_hw_sectors().
- **/
-void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
-{
- blk_limits_max_hw_sectors(&q->limits, max_hw_sectors);
+ max_sectors = min_not_zero(max_hw_sectors, limits->max_dev_sectors);
+ max_sectors = min_t(unsigned int, max_sectors, BLK_DEF_MAX_SECTORS);
+ limits->max_sectors = max_sectors;
}
EXPORT_SYMBOL(blk_queue_max_hw_sectors);
@@ -527,6 +522,7 @@
t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
+ t->max_dev_sectors = min_not_zero(t->max_dev_sectors, b->max_dev_sectors);
t->max_write_same_sectors = min(t->max_write_same_sectors,
b->max_write_same_sectors);
t->bounce_pfn = min_not_zero(t->bounce_pfn, b->bounce_pfn);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 565b8da..e140cc4 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -205,6 +205,9 @@
if (ret < 0)
return ret;
+ max_hw_sectors_kb = min_not_zero(max_hw_sectors_kb, (unsigned long)
+ q->limits.max_dev_sectors >> 1);
+
if (max_sectors_kb > max_hw_sectors_kb || max_sectors_kb < page_kb)
return -EINVAL;
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 5f692ae..64eed87 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -364,6 +364,7 @@
tristate "HP Smart Array SCSI driver"
depends on PCI && SCSI
select CHECK_SIGNATURE
+ select SCSI_SAS_ATTRS
help
This driver supports HP Smart Array Controllers (circa 2009).
It is a SCSI alternative to the cciss driver, which is a block
@@ -499,6 +500,7 @@
tristate "AdvanSys SCSI support"
depends on SCSI
depends on ISA || EISA || PCI
+ depends on ISA_DMA_API || !ISA
help
This is a driver for all SCSI host adapters manufactured by
AdvanSys. It is documented in the kernel source in
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 519f9a4..febbd83 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -7803,7 +7803,7 @@
return ASC_BUSY;
}
scsiqp->sense_addr = cpu_to_le32(sense_addr);
- scsiqp->sense_len = cpu_to_le32(SCSI_SENSE_BUFFERSIZE);
+ scsiqp->sense_len = SCSI_SENSE_BUFFERSIZE;
/* Build ADV_SCSI_REQ_Q */
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 323982f..82ac1cd 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -333,6 +333,17 @@
kfree(queuedata);
}
+ if (shost->shost_state == SHOST_CREATED) {
+ /*
+ * Free the shost_dev device name here if scsi_host_alloc()
+ * and scsi_host_put() have been called but neither
+ * scsi_host_add() nor scsi_host_remove() has been called.
+ * This avoids that the memory allocated for the shost_dev
+ * name is leaked.
+ */
+ kfree(dev_name(&shost->shost_dev));
+ }
+
scsi_destroy_command_freelist(shost);
if (shost_use_blk_mq(shost)) {
if (shost->tag_set.tags)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 6a8f958..a386036 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -8671,7 +8671,7 @@
if ((rc != 0) || (c->err_info->CommandStatus != 0))
goto errout;
- if (*options && HPSA_DIAG_OPTS_DISABLE_RLD_CACHING)
+ if (*options & HPSA_DIAG_OPTS_DISABLE_RLD_CACHING)
goto out;
errout:
diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig
index 2906146..b736dbc 100644
--- a/drivers/scsi/mpt3sas/Kconfig
+++ b/drivers/scsi/mpt3sas/Kconfig
@@ -71,3 +71,12 @@
MAX_PHYS_SEGMENTS in most kernels. However in SuSE kernels this
can be 256. However, it may decreased down to 16. Decreasing this
parameter will reduce memory requirements on a per controller instance.
+
+config SCSI_MPT2SAS
+ tristate "Legacy MPT2SAS config option"
+ default n
+ select SCSI_MPT3SAS
+ depends on PCI && SCSI
+ ---help---
+ Dummy config option for backwards compatiblity: configure the MPT3SAS
+ driver instead.
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index d95206b..9ab77b0 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3905,8 +3905,7 @@
* We do not expose raid functionality to upper layer for warpdrive.
*/
if (!ioc->is_warpdrive && !scsih_is_raid(&scmd->device->sdev_gendev)
- && (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
- scmd->cmd_len != 32)
+ && sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
smid = mpt3sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 90fdf0e..675e7fa 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -758,7 +758,7 @@
struct device_attribute *attr,
const char *buffer, size_t size)
{
- int val = 0;
+ unsigned int val = 0;
struct mvs_info *mvi = NULL;
struct Scsi_Host *shost = class_to_shost(cdev);
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
@@ -766,7 +766,7 @@
if (buffer == NULL)
return size;
- if (sscanf(buffer, "%d", &val) != 1)
+ if (sscanf(buffer, "%u", &val) != 1)
return -EINVAL;
if (val >= 0x10000) {
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index eb0cc54..b6b4cfd 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -433,7 +433,7 @@
if (off_in < QLA82XX_PCI_CRBSPACE)
return -1;
- *off_out = (void __iomem *)(off_in - QLA82XX_PCI_CRBSPACE);
+ off_in -= QLA82XX_PCI_CRBSPACE;
/* Try direct map */
m = &crb_128M_2M_map[CRB_BLK(off_in)].sub_block[CRB_SUBBLK(off_in)];
@@ -443,6 +443,7 @@
return 0;
}
/* Not in direct map, use crb window */
+ *off_out = (void __iomem *)off_in;
return 1;
}
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index dfcc45b..d09d602 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -465,8 +465,9 @@
0} },
{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* MAINT OUT */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
- {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* VERIFY */
- {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0x2f, 0, F_D_OUT_MAYBE | FF_DIRECT_IO, NULL, NULL, /* VERIFY(10) */
+ {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc7,
+ 0, 0, 0, 0, 0, 0} },
{1, 0x7f, 0x9, F_SA_HIGH | F_D_IN | FF_DIRECT_IO, resp_read_dt0,
vl_iarr, {32, 0xc7, 0, 0, 0, 0, 0x1f, 0x18, 0x0, 0x9, 0xfe, 0,
0xff, 0xff, 0xff, 0xff} },/* VARIABLE LENGTH, READ(32) */
@@ -477,8 +478,8 @@
{10, 0x13, 0xff, 0xff, 0, 0, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0,
0} },
/* 20 */
- {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* ALLOW REMOVAL */
- {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0x1e, 0, 0, NULL, NULL, /* ALLOW REMOVAL */
+ {6, 0, 0, 0, 0x3, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0x1, 0, 0, resp_start_stop, NULL, /* REWIND ?? */
{6, 0x1, 0, 0, 0, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* ATA_PT */
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 8324539..054923e 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -701,9 +701,12 @@
* strings.
*/
if (sdev->inquiry_len < 36) {
- sdev_printk(KERN_INFO, sdev,
- "scsi scan: INQUIRY result too short (%d),"
- " using 36\n", sdev->inquiry_len);
+ if (!sdev->host->short_inquiry) {
+ shost_printk(KERN_INFO, sdev->host,
+ "scsi scan: INQUIRY result too short (%d),"
+ " using 36\n", sdev->inquiry_len);
+ sdev->host->short_inquiry = 1;
+ }
sdev->inquiry_len = 36;
}
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index f5ace2b..21930c9 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1102,6 +1102,14 @@
{
struct device *dev = &sdev->sdev_gendev;
+ /*
+ * This cleanup path is not reentrant and while it is impossible
+ * to get a new reference with scsi_device_get() someone can still
+ * hold a previously acquired one.
+ */
+ if (sdev->sdev_state == SDEV_DEL)
+ return;
+
if (sdev->is_visible) {
if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
return;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 5451980..3d22fc3 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -638,11 +638,24 @@
unsigned int max_blocks = 0;
q->limits.discard_zeroes_data = 0;
- q->limits.discard_alignment = sdkp->unmap_alignment *
- logical_block_size;
- q->limits.discard_granularity =
- max(sdkp->physical_block_size,
- sdkp->unmap_granularity * logical_block_size);
+
+ /*
+ * When LBPRZ is reported, discard alignment and granularity
+ * must be fixed to the logical block size. Otherwise the block
+ * layer will drop misaligned portions of the request which can
+ * lead to data corruption. If LBPRZ is not set, we honor the
+ * device preference.
+ */
+ if (sdkp->lbprz) {
+ q->limits.discard_alignment = 0;
+ q->limits.discard_granularity = 1;
+ } else {
+ q->limits.discard_alignment = sdkp->unmap_alignment *
+ logical_block_size;
+ q->limits.discard_granularity =
+ max(sdkp->physical_block_size,
+ sdkp->unmap_granularity * logical_block_size);
+ }
sdkp->provisioning_mode = mode;
@@ -2321,11 +2334,8 @@
}
}
- if (sdkp->capacity > 0xffffffff) {
+ if (sdkp->capacity > 0xffffffff)
sdp->use_16_for_rw = 1;
- sdkp->max_xfer_blocks = SD_MAX_XFER_BLOCKS;
- } else
- sdkp->max_xfer_blocks = SD_DEF_XFER_BLOCKS;
/* Rescale capacity to 512-byte units */
if (sector_size == 4096)
@@ -2642,7 +2652,6 @@
{
unsigned int sector_sz = sdkp->device->sector_size;
const int vpd_len = 64;
- u32 max_xfer_length;
unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
if (!buffer ||
@@ -2650,14 +2659,11 @@
scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len))
goto out;
- max_xfer_length = get_unaligned_be32(&buffer[8]);
- if (max_xfer_length)
- sdkp->max_xfer_blocks = max_xfer_length;
-
blk_queue_io_min(sdkp->disk->queue,
get_unaligned_be16(&buffer[6]) * sector_sz);
- blk_queue_io_opt(sdkp->disk->queue,
- get_unaligned_be32(&buffer[12]) * sector_sz);
+
+ sdkp->max_xfer_blocks = get_unaligned_be32(&buffer[8]);
+ sdkp->opt_xfer_blocks = get_unaligned_be32(&buffer[12]);
if (buffer[3] == 0x3c) {
unsigned int lba_count, desc_count;
@@ -2806,6 +2812,11 @@
return 0;
}
+static inline u32 logical_to_sectors(struct scsi_device *sdev, u32 blocks)
+{
+ return blocks << (ilog2(sdev->sector_size) - 9);
+}
+
/**
* sd_revalidate_disk - called the first time a new disk is seen,
* performs disk spin up, read_capacity, etc.
@@ -2815,8 +2826,9 @@
{
struct scsi_disk *sdkp = scsi_disk(disk);
struct scsi_device *sdp = sdkp->device;
+ struct request_queue *q = sdkp->disk->queue;
unsigned char *buffer;
- unsigned int max_xfer;
+ unsigned int dev_max, rw_max;
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
"sd_revalidate_disk\n"));
@@ -2864,11 +2876,26 @@
*/
sd_set_flush_flag(sdkp);
- max_xfer = sdkp->max_xfer_blocks;
- max_xfer <<= ilog2(sdp->sector_size) - 9;
+ /* Initial block count limit based on CDB TRANSFER LENGTH field size. */
+ dev_max = sdp->use_16_for_rw ? SD_MAX_XFER_BLOCKS : SD_DEF_XFER_BLOCKS;
- sdkp->disk->queue->limits.max_sectors =
- min_not_zero(queue_max_hw_sectors(sdkp->disk->queue), max_xfer);
+ /* Some devices report a maximum block count for READ/WRITE requests. */
+ dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks);
+ q->limits.max_dev_sectors = logical_to_sectors(sdp, dev_max);
+
+ /*
+ * Use the device's preferred I/O size for reads and writes
+ * unless the reported value is unreasonably large (or garbage).
+ */
+ if (sdkp->opt_xfer_blocks && sdkp->opt_xfer_blocks <= dev_max &&
+ sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS)
+ rw_max = q->limits.io_opt =
+ logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
+ else
+ rw_max = BLK_DEF_MAX_SECTORS;
+
+ /* Combine with controller limits */
+ q->limits.max_sectors = min(rw_max, queue_max_hw_sectors(q));
set_capacity(disk, sdkp->capacity);
sd_config_write_same(sdkp);
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 63ba5ca..5f2a84a 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -67,6 +67,7 @@
atomic_t openers;
sector_t capacity; /* size in 512-byte sectors */
u32 max_xfer_blocks;
+ u32 opt_xfer_blocks;
u32 max_ws_blocks;
u32 max_unmap_blocks;
u32 unmap_granularity;
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index e0a1e52..2e52295 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4083,6 +4083,7 @@
}
cdev->owner = THIS_MODULE;
cdev->ops = &st_fops;
+ STm->cdevs[rew] = cdev;
error = cdev_add(cdev, cdev_devno, 1);
if (error) {
@@ -4091,7 +4092,6 @@
pr_err("st%d: Device not attached.\n", dev_num);
goto out_free;
}
- STm->cdevs[rew] = cdev;
i = mode << (4 - ST_NBR_MODE_BITS);
snprintf(name, 10, "%s%s%s", rew ? "n" : "",
@@ -4110,8 +4110,9 @@
return 0;
out_free:
cdev_del(STm->cdevs[rew]);
- STm->cdevs[rew] = NULL;
out:
+ STm->cdevs[rew] = NULL;
+ STm->devs[rew] = NULL;
return error;
}
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 3fe27f8..a5f9643 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -254,6 +254,7 @@
unsigned long virt_boundary_mask;
unsigned int max_hw_sectors;
+ unsigned int max_dev_sectors;
unsigned int chunk_sectors;
unsigned int max_sectors;
unsigned int max_segment_size;
@@ -958,7 +959,6 @@
extern void blk_cleanup_queue(struct request_queue *);
extern void blk_queue_make_request(struct request_queue *, make_request_fn *);
extern void blk_queue_bounce_limit(struct request_queue *, u64);
-extern void blk_limits_max_hw_sectors(struct queue_limits *, unsigned int);
extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
extern void blk_queue_chunk_sectors(struct request_queue *, unsigned int);
extern void blk_queue_max_segments(struct request_queue *, unsigned short);
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index ed52712..fcfa3d7 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -668,6 +668,9 @@
unsigned use_blk_mq:1;
unsigned use_cmd_list:1;
+ /* Host responded with short (<36 bytes) INQUIRY result */
+ unsigned short_inquiry:1;
+
/*
* Optional work queue to be utilized by the transport
*/