commit bdf3092af601ccad765974652ab103162fbe14f4
author Vlad Yasevich <vladislav.yasevich@hp.com> Fri Mar 23 11:33:12 2007 -0700
committer David S. Miller <davem@sunset.davemloft.net> Wed Apr 25 22:28:02 2007 -0700
tree a34ac81649e9620b64317994c6fb5091b06fca47
parent 1ae4114dce35dd1d32ed847f60b599dbbdfd5829

[SCTP]: Honor flags when setting peer address parameters

Parameters only take effect when a corresponding flag bit is set
and a value is specified. This means we need to check the flags
in addition to checking for non-zero value.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sctp/socket.c

diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 1e787a2..dda2f67 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -2039,6 +2039,10 @@
  *                     SPP_HB_DEMAND - Request a user initiated heartbeat
  *                     to be made immediately.
  *
+ *                     SPP_HB_TIME_IS_ZERO - Specify's that the time for
+ *                     heartbeat delayis to be set to the value of 0
+ *                     milliseconds.
+ *
  *                     SPP_PMTUD_ENABLE - This field will enable PMTU
  *                     discovery upon the specified address. Note that
  *                     if the address feild is empty then all addresses
@@ -2081,13 +2085,30 @@
 			return error;
 	}
 
-	if (params->spp_hbinterval) {
-		if (trans) {
-			trans->hbinterval = msecs_to_jiffies(params->spp_hbinterval);
-		} else if (asoc) {
-			asoc->hbinterval = msecs_to_jiffies(params->spp_hbinterval);
-		} else {
-			sp->hbinterval = params->spp_hbinterval;
+	/* Note that unless the spp_flag is set to SPP_HB_ENABLE the value of
+	 * this field is ignored.  Note also that a value of zero indicates
+	 * the current setting should be left unchanged.
+	 */
+	if (params->spp_flags & SPP_HB_ENABLE) {
+
+		/* Re-zero the interval if the SPP_HB_TIME_IS_ZERO is
+		 * set.  This lets us use 0 value when this flag
+		 * is set.
+		 */
+		if (params->spp_flags & SPP_HB_TIME_IS_ZERO)
+			params->spp_hbinterval = 0;
+
+		if (params->spp_hbinterval ||
+		    (params->spp_flags & SPP_HB_TIME_IS_ZERO)) {
+			if (trans) {
+				trans->hbinterval =
+				    msecs_to_jiffies(params->spp_hbinterval);
+			} else if (asoc) {
+				asoc->hbinterval =
+				    msecs_to_jiffies(params->spp_hbinterval);
+			} else {
+				sp->hbinterval = params->spp_hbinterval;
+			}
 		}
 	}
 
@@ -2104,7 +2125,12 @@
 		}
 	}
 
-	if (params->spp_pathmtu) {
+	/* When Path MTU discovery is disabled the value specified here will
+	 * be the "fixed" path mtu (i.e. the value of the spp_flags field must
+	 * include the flag SPP_PMTUD_DISABLE for this field to have any
+	 * effect).
+	 */
+	if ((params->spp_flags & SPP_PMTUD_DISABLE) && params->spp_pathmtu) {
 		if (trans) {
 			trans->pathmtu = params->spp_pathmtu;
 			sctp_assoc_sync_pmtu(asoc);
@@ -2135,7 +2161,11 @@
 		}
 	}
 
-	if (params->spp_sackdelay) {
+	/* Note that unless the spp_flag is set to SPP_SACKDELAY_ENABLE the
+	 * value of this field is ignored.  Note also that a value of zero
+	 * indicates the current setting should be left unchanged.
+	 */
+	if ((params->spp_flags & SPP_SACKDELAY_ENABLE) && params->spp_sackdelay) {
 		if (trans) {
 			trans->sackdelay =
 				msecs_to_jiffies(params->spp_sackdelay);
@@ -2163,7 +2193,11 @@
 		}
 	}
 
-	if (params->spp_pathmaxrxt) {
+	/* Note that unless the spp_flag is set to SPP_PMTUD_ENABLE the value
+	 * of this field is ignored.  Note also that a value of zero
+	 * indicates the current setting should be left unchanged.
+	 */
+	if ((params->spp_flags & SPP_PMTUD_ENABLE) && params->spp_pathmaxrxt) {
 		if (trans) {
 			trans->pathmaxrxt = params->spp_pathmaxrxt;
 		} else if (asoc) {