Merge branch 'pm-cpufreq'
* pm-cpufreq:
cpufreq: Fix up cpufreq_boost_set_sw()
cpufreq: fix minor typo in struct cpufreq_driver doc comment
cpufreq: qoriq: Add platform dependencies
clk: qoriq: add cpufreq platform device
cpufreq: qoriq: convert to a platform driver
cpufreq: qcom: fix wrong compatible binding
cpufreq: imx-cpufreq-dt: support i.MX7ULP
cpufreq: dt: Add support for r8a7742
cpufreq: Add i.MX7ULP to cpufreq-dt-platdev blacklist
cpufreq: omap: Build driver by default for ARCH_OMAP2PLUS
cpufreq: intel_pstate: Use passive mode by default without HWP
diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst
index ad392f3..39d80bc 100644
--- a/Documentation/admin-guide/pm/intel_pstate.rst
+++ b/Documentation/admin-guide/pm/intel_pstate.rst
@@ -62,9 +62,10 @@
Active Mode
-----------
-This is the default operation mode of ``intel_pstate``. If it works in this
-mode, the ``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq``
-policies contains the string "intel_pstate".
+This is the default operation mode of ``intel_pstate`` for processors with
+hardware-managed P-states (HWP) support. If it works in this mode, the
+``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq`` policies
+contains the string "intel_pstate".
In this mode the driver bypasses the scaling governors layer of ``CPUFreq`` and
provides its own scaling algorithms for P-state selection. Those algorithms
@@ -138,12 +139,13 @@
Active Mode Without HWP
~~~~~~~~~~~~~~~~~~~~~~~
-This is the default operation mode for processors that do not support the HWP
-feature. It also is used by default with the ``intel_pstate=no_hwp`` argument
-in the kernel command line. However, in this mode ``intel_pstate`` may refuse
-to work with the given processor if it does not recognize it. [Note that
-``intel_pstate`` will never refuse to work with any processor with the HWP
-feature enabled.]
+This operation mode is optional for processors that do not support the HWP
+feature or when the ``intel_pstate=no_hwp`` argument is passed to the kernel in
+the command line. The active mode is used in those cases if the
+``intel_pstate=active`` argument is passed to the kernel in the command line.
+In this mode ``intel_pstate`` may refuse to work with processors that are not
+recognized by it. [Note that ``intel_pstate`` will never refuse to work with
+any processor with the HWP feature enabled.]
In this mode ``intel_pstate`` registers utilization update callbacks with the
CPU scheduler in order to run a P-state selection algorithm, either
@@ -188,10 +190,14 @@
Passive Mode
------------
-This mode is used if the ``intel_pstate=passive`` argument is passed to the
-kernel in the command line (it implies the ``intel_pstate=no_hwp`` setting too).
-Like in the active mode without HWP support, in this mode ``intel_pstate`` may
-refuse to work with the given processor if it does not recognize it.
+This is the default operation mode of ``intel_pstate`` for processors without
+hardware-managed P-states (HWP) support. It is always used if the
+``intel_pstate=passive`` argument is passed to the kernel in the command line
+regardless of whether or not the given processor supports HWP. [Note that the
+``intel_pstate=no_hwp`` setting implies ``intel_pstate=passive`` if it is used
+without ``intel_pstate=active``.] Like in the active mode without HWP support,
+in this mode ``intel_pstate`` may refuse to work with processors that are not
+recognized by it.
If the driver works in this mode, the ``scaling_driver`` policy attribute in
``sysfs`` for all ``CPUFreq`` policies contains the string "intel_cpufreq".
diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index d5946f7..374afca 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -95,6 +95,7 @@ struct clockgen {
};
static struct clockgen clockgen;
+static bool add_cpufreq_dev __initdata;
static void cg_out(struct clockgen *cg, u32 val, u32 __iomem *reg)
{
@@ -1019,7 +1020,7 @@ static void __init create_muxes(struct clockgen *cg)
}
}
-static void __init clockgen_init(struct device_node *np);
+static void __init _clockgen_init(struct device_node *np, bool legacy);
/*
* Legacy nodes may get probed before the parent clockgen node.
@@ -1030,7 +1031,7 @@ static void __init clockgen_init(struct device_node *np);
static void __init legacy_init_clockgen(struct device_node *np)
{
if (!clockgen.node)
- clockgen_init(of_get_parent(np));
+ _clockgen_init(of_get_parent(np), true);
}
/* Legacy node */
@@ -1447,7 +1448,7 @@ static bool __init has_erratum_a4510(void)
}
#endif
-static void __init clockgen_init(struct device_node *np)
+static void __init _clockgen_init(struct device_node *np, bool legacy)
{
int i, ret;
bool is_old_ls1021a = false;
@@ -1516,12 +1517,35 @@ static void __init clockgen_init(struct device_node *np)
__func__, np, ret);
}
+ /* Don't create cpufreq device for legacy clockgen blocks */
+ add_cpufreq_dev = !legacy;
+
return;
err:
iounmap(clockgen.regs);
clockgen.regs = NULL;
}
+static void __init clockgen_init(struct device_node *np)
+{
+ _clockgen_init(np, false);
+}
+
+static int __init clockgen_cpufreq_init(void)
+{
+ struct platform_device *pdev;
+
+ if (add_cpufreq_dev) {
+ pdev = platform_device_register_simple("qoriq-cpufreq", -1,
+ NULL, 0);
+ if (IS_ERR(pdev))
+ pr_err("Couldn't register qoriq-cpufreq err=%ld\n",
+ PTR_ERR(pdev));
+ }
+ return 0;
+}
+device_initcall(clockgen_cpufreq_init);
+
CLK_OF_DECLARE(qoriq_clockgen_1, "fsl,qoriq-clockgen-1.0", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_b4420, "fsl,b4420-clockgen", clockgen_init);
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index c3e6bd5..e917501 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -323,7 +323,8 @@
config QORIQ_CPUFREQ
tristate "CPU frequency scaling driver for Freescale QorIQ SoCs"
- depends on OF && COMMON_CLK && (PPC_E500MC || ARM || ARM64)
+ depends on OF && COMMON_CLK
+ depends on PPC_E500MC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
select CLK_QORIQ
help
This adds the CPUFreq driver support for Freescale QorIQ SoCs
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 15c1a12..9481292 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -317,6 +317,7 @@
config ARM_TI_CPUFREQ
bool "Texas Instruments CPUFreq support"
depends on ARCH_OMAP2PLUS
+ default ARCH_OMAP2PLUS
help
This driver enables valid OPPs on the running platform based on
values contained within the SoC in use. Enable this in order to
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index cb9db16..e8e20fe 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -53,6 +53,7 @@ static const struct of_device_id whitelist[] __initconst = {
{ .compatible = "renesas,r7s72100", },
{ .compatible = "renesas,r8a73a4", },
{ .compatible = "renesas,r8a7740", },
+ { .compatible = "renesas,r8a7742", },
{ .compatible = "renesas,r8a7743", },
{ .compatible = "renesas,r8a7744", },
{ .compatible = "renesas,r8a7745", },
@@ -105,6 +106,7 @@ static const struct of_device_id blacklist[] __initconst = {
{ .compatible = "calxeda,highbank", },
{ .compatible = "calxeda,ecx-2000", },
+ { .compatible = "fsl,imx7ulp", },
{ .compatible = "fsl,imx7d", },
{ .compatible = "fsl,imx8mq", },
{ .compatible = "fsl,imx8mm", },
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 045f9fe..d03f250 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -2535,26 +2535,27 @@ EXPORT_SYMBOL_GPL(cpufreq_update_limits);
static int cpufreq_boost_set_sw(int state)
{
struct cpufreq_policy *policy;
- int ret = -EINVAL;
for_each_active_policy(policy) {
+ int ret;
+
if (!policy->freq_table)
- continue;
+ return -ENXIO;
ret = cpufreq_frequency_table_cpuinfo(policy,
policy->freq_table);
if (ret) {
pr_err("%s: Policy frequency update failed\n",
__func__);
- break;
+ return ret;
}
ret = freq_qos_update_request(policy->max_freq_req, policy->max);
if (ret < 0)
- break;
+ return ret;
}
- return ret;
+ return 0;
}
int cpufreq_boost_trigger_state(int state)
diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c
index de206d2..3fe9125 100644
--- a/drivers/cpufreq/imx-cpufreq-dt.c
+++ b/drivers/cpufreq/imx-cpufreq-dt.c
@@ -3,7 +3,9 @@
* Copyright 2019 NXP
*/
+#include <linux/clk.h>
#include <linux/cpu.h>
+#include <linux/cpufreq.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -12,8 +14,11 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
+#include <linux/regulator/consumer.h>
#include <linux/slab.h>
+#include "cpufreq-dt.h"
+
#define OCOTP_CFG3_SPEED_GRADE_SHIFT 8
#define OCOTP_CFG3_SPEED_GRADE_MASK (0x3 << 8)
#define IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK (0xf << 8)
@@ -22,20 +27,92 @@
#define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_SHIFT 5
#define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_MASK (0x3 << 5)
+#define IMX7ULP_MAX_RUN_FREQ 528000
+
/* cpufreq-dt device registered by imx-cpufreq-dt */
static struct platform_device *cpufreq_dt_pdev;
static struct opp_table *cpufreq_opp_table;
+static struct device *cpu_dev;
+
+enum IMX7ULP_CPUFREQ_CLKS {
+ ARM,
+ CORE,
+ SCS_SEL,
+ HSRUN_CORE,
+ HSRUN_SCS_SEL,
+ FIRC,
+};
+
+static struct clk_bulk_data imx7ulp_clks[] = {
+ { .id = "arm" },
+ { .id = "core" },
+ { .id = "scs_sel" },
+ { .id = "hsrun_core" },
+ { .id = "hsrun_scs_sel" },
+ { .id = "firc" },
+};
+
+static unsigned int imx7ulp_get_intermediate(struct cpufreq_policy *policy,
+ unsigned int index)
+{
+ return clk_get_rate(imx7ulp_clks[FIRC].clk);
+}
+
+static int imx7ulp_target_intermediate(struct cpufreq_policy *policy,
+ unsigned int index)
+{
+ unsigned int newfreq = policy->freq_table[index].frequency;
+
+ clk_set_parent(imx7ulp_clks[SCS_SEL].clk, imx7ulp_clks[FIRC].clk);
+ clk_set_parent(imx7ulp_clks[HSRUN_SCS_SEL].clk, imx7ulp_clks[FIRC].clk);
+
+ if (newfreq > IMX7ULP_MAX_RUN_FREQ)
+ clk_set_parent(imx7ulp_clks[ARM].clk,
+ imx7ulp_clks[HSRUN_CORE].clk);
+ else
+ clk_set_parent(imx7ulp_clks[ARM].clk, imx7ulp_clks[CORE].clk);
+
+ return 0;
+}
+
+static struct cpufreq_dt_platform_data imx7ulp_data = {
+ .target_intermediate = imx7ulp_target_intermediate,
+ .get_intermediate = imx7ulp_get_intermediate,
+};
static int imx_cpufreq_dt_probe(struct platform_device *pdev)
{
- struct device *cpu_dev = get_cpu_device(0);
+ struct platform_device *dt_pdev;
u32 cell_value, supported_hw[2];
int speed_grade, mkt_segment;
int ret;
+ cpu_dev = get_cpu_device(0);
+
if (!of_find_property(cpu_dev->of_node, "cpu-supply", NULL))
return -ENODEV;
+ if (of_machine_is_compatible("fsl,imx7ulp")) {
+ ret = clk_bulk_get(cpu_dev, ARRAY_SIZE(imx7ulp_clks),
+ imx7ulp_clks);
+ if (ret)
+ return ret;
+
+ dt_pdev = platform_device_register_data(NULL, "cpufreq-dt",
+ -1, &imx7ulp_data,
+ sizeof(imx7ulp_data));
+ if (IS_ERR(dt_pdev)) {
+ clk_bulk_put(ARRAY_SIZE(imx7ulp_clks), imx7ulp_clks);
+ ret = PTR_ERR(dt_pdev);
+ dev_err(&pdev->dev, "Failed to register cpufreq-dt: %d\n", ret);
+ return ret;
+ }
+
+ cpufreq_dt_pdev = dt_pdev;
+
+ return 0;
+ }
+
ret = nvmem_cell_read_u32(cpu_dev, "speed_grade", &cell_value);
if (ret)
return ret;
@@ -98,7 +175,10 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev)
static int imx_cpufreq_dt_remove(struct platform_device *pdev)
{
platform_device_unregister(cpufreq_dt_pdev);
- dev_pm_opp_put_supported_hw(cpufreq_opp_table);
+ if (!of_machine_is_compatible("fsl,imx7ulp"))
+ dev_pm_opp_put_supported_hw(cpufreq_opp_table);
+ else
+ clk_bulk_put(ARRAY_SIZE(imx7ulp_clks), imx7ulp_clks);
return 0;
}
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 4d3429b..8e23a69 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -2771,6 +2771,8 @@ static int __init intel_pstate_init(void)
pr_info("Invalid MSRs\n");
return -ENODEV;
}
+ /* Without HWP start in the passive mode. */
+ default_driver = &intel_cpufreq;
hwp_cpu_matched:
/*
@@ -2816,7 +2818,6 @@ static int __init intel_pstate_setup(char *str)
if (!strcmp(str, "disable")) {
no_load = 1;
} else if (!strcmp(str, "passive")) {
- pr_info("Passive mode enabled\n");
default_driver = &intel_cpufreq;
no_hwp = 1;
}
diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index a1b8238..d06b378 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -277,7 +277,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
if (!np)
return -ENOENT;
- ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu");
+ ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
if (!ret) {
of_node_put(np);
return -ENOENT;
diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c
index 8e436dc..6b6b20d 100644
--- a/drivers/cpufreq/qoriq-cpufreq.c
+++ b/drivers/cpufreq/qoriq-cpufreq.c
@@ -18,6 +18,7 @@
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/smp.h>
+#include <linux/platform_device.h>
/**
* struct cpu_data
@@ -29,12 +30,6 @@ struct cpu_data {
struct cpufreq_frequency_table *table;
};
-/*
- * Don't use cpufreq on this SoC -- used when the SoC would have otherwise
- * matched a more generic compatible.
- */
-#define SOC_BLACKLIST 1
-
/**
* struct soc_data - SoC specific data
* @flags: SOC_xxx
@@ -264,64 +259,51 @@ static struct cpufreq_driver qoriq_cpufreq_driver = {
.attr = cpufreq_generic_attr,
};
-static const struct soc_data blacklist = {
- .flags = SOC_BLACKLIST,
-};
-
-static const struct of_device_id node_matches[] __initconst = {
+static const struct of_device_id qoriq_cpufreq_blacklist[] = {
/* e6500 cannot use cpufreq due to erratum A-008083 */
- { .compatible = "fsl,b4420-clockgen", &blacklist },
- { .compatible = "fsl,b4860-clockgen", &blacklist },
- { .compatible = "fsl,t2080-clockgen", &blacklist },
- { .compatible = "fsl,t4240-clockgen", &blacklist },
-
- { .compatible = "fsl,ls1012a-clockgen", },
- { .compatible = "fsl,ls1021a-clockgen", },
- { .compatible = "fsl,ls1028a-clockgen", },
- { .compatible = "fsl,ls1043a-clockgen", },
- { .compatible = "fsl,ls1046a-clockgen", },
- { .compatible = "fsl,ls1088a-clockgen", },
- { .compatible = "fsl,ls2080a-clockgen", },
- { .compatible = "fsl,lx2160a-clockgen", },
- { .compatible = "fsl,p4080-clockgen", },
- { .compatible = "fsl,qoriq-clockgen-1.0", },
- { .compatible = "fsl,qoriq-clockgen-2.0", },
+ { .compatible = "fsl,b4420-clockgen", },
+ { .compatible = "fsl,b4860-clockgen", },
+ { .compatible = "fsl,t2080-clockgen", },
+ { .compatible = "fsl,t4240-clockgen", },
{}
};
-static int __init qoriq_cpufreq_init(void)
+static int qoriq_cpufreq_probe(struct platform_device *pdev)
{
int ret;
- struct device_node *np;
- const struct of_device_id *match;
- const struct soc_data *data;
+ struct device_node *np;
- np = of_find_matching_node(NULL, node_matches);
- if (!np)
+ np = of_find_matching_node(NULL, qoriq_cpufreq_blacklist);
+ if (np) {
+ dev_info(&pdev->dev, "Disabling due to erratum A-008083");
return -ENODEV;
-
- match = of_match_node(node_matches, np);
- data = match->data;
-
- of_node_put(np);
-
- if (data && data->flags & SOC_BLACKLIST)
- return -ENODEV;
+ }
ret = cpufreq_register_driver(&qoriq_cpufreq_driver);
- if (!ret)
- pr_info("Freescale QorIQ CPU frequency scaling driver\n");
+ if (ret)
+ return ret;
- return ret;
+ dev_info(&pdev->dev, "Freescale QorIQ CPU frequency scaling driver\n");
+ return 0;
}
-module_init(qoriq_cpufreq_init);
-static void __exit qoriq_cpufreq_exit(void)
+static int qoriq_cpufreq_remove(struct platform_device *pdev)
{
cpufreq_unregister_driver(&qoriq_cpufreq_driver);
-}
-module_exit(qoriq_cpufreq_exit);
+ return 0;
+}
+
+static struct platform_driver qoriq_cpufreq_platform_driver = {
+ .driver = {
+ .name = "qoriq-cpufreq",
+ },
+ .probe = qoriq_cpufreq_probe,
+ .remove = qoriq_cpufreq_remove,
+};
+module_platform_driver(qoriq_cpufreq_platform_driver);
+
+MODULE_ALIAS("platform:qoriq-cpufreq");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>");
MODULE_DESCRIPTION("cpufreq driver for Freescale QorIQ series SoCs");
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index f724025..67d5950 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -330,7 +330,7 @@ struct cpufreq_driver {
*
* get_intermediate should return a stable intermediate frequency
* platform wants to switch to and target_intermediate() should set CPU
- * to to that frequency, before jumping to the frequency corresponding
+ * to that frequency, before jumping to the frequency corresponding
* to 'index'. Core will take care of sending notifications and driver
* doesn't have to handle them in target_intermediate() or
* target_index().