ath9k: Use standard #defines for PCIe Capability ASPM fields
Use the standard #defines for PCIe Capability ASPM fields.
Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but
these are defined for the Linux ASPM interfaces, e.g.,
pci_disable_link_state(), and only coincidentally match the actual register
bits. PCIE_LINK_STATE_CLKPM, also part of that interface, does not match
the register bit.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index f088f4b..71d8207 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -125,23 +125,23 @@
if ((ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) &&
(AR_SREV_9285(ah))) {
- /* Bluetooth coexistance requires disabling ASPM. */
+ /* Bluetooth coexistence requires disabling ASPM. */
pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL,
- PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
+ PCI_EXP_LNKCTL_ASPM_L0S | PCI_EXP_LNKCTL_ASPM_L1);
/*
* Both upstream and downstream PCIe components should
* have the same ASPM settings.
*/
pcie_capability_clear_word(parent, PCI_EXP_LNKCTL,
- PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
+ PCI_EXP_LNKCTL_ASPM_L0S | PCI_EXP_LNKCTL_ASPM_L1);
ath_info(common, "Disabling ASPM since BTCOEX is enabled\n");
return;
}
pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &aspm);
- if (aspm & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1)) {
+ if (aspm & (PCI_EXP_LNKCTL_ASPM_L0S | PCI_EXP_LNKCTL_ASPM_L1)) {
ah->aspm_enabled = true;
/* Initialize PCIe PM and SERDES registers. */
ath9k_hw_configpcipowersave(ah, false);