Merge branch 'v2.6.24-rc1-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep
* 'v2.6.24-rc1-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep:
lockdep: fix a typo in the __lock_acquire comment
sched: fix unconditional irq lock
lockdep: fixup irq tracing
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index a30dd44..681e2b3 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -464,8 +464,8 @@
Nuff said. If your code deviates too much from this, it is likely
to be rejected without further review, and without comment.
-Once significant exception is when moving code from one file to
-another in this case you should not modify the moved code at all in
+One significant exception is when moving code from one file to
+another -- in this case you should not modify the moved code at all in
the same patch which moves it. This clearly delineates the act of
moving the code and your changes. This greatly aids review of the
actual differences and allows tools to better track the history of
diff --git a/Documentation/i386/boot.txt b/Documentation/i386/boot.txt
index 2f75e75..fc49b79 100644
--- a/Documentation/i386/boot.txt
+++ b/Documentation/i386/boot.txt
@@ -785,3 +785,41 @@
After completing your hook, you should jump to the address
that was in this field before your boot loader overwrote it
(relocated, if appropriate.)
+
+
+**** 32-bit BOOT PROTOCOL
+
+For machine with some new BIOS other than legacy BIOS, such as EFI,
+LinuxBIOS, etc, and kexec, the 16-bit real mode setup code in kernel
+based on legacy BIOS can not be used, so a 32-bit boot protocol needs
+to be defined.
+
+In 32-bit boot protocol, the first step in loading a Linux kernel
+should be to setup the boot parameters (struct boot_params,
+traditionally known as "zero page"). The memory for struct boot_params
+should be allocated and initialized to all zero. Then the setup header
+from offset 0x01f1 of kernel image on should be loaded into struct
+boot_params and examined. The end of setup header can be calculated as
+follow:
+
+ 0x0202 + byte value at offset 0x0201
+
+In addition to read/modify/write the setup header of the struct
+boot_params as that of 16-bit boot protocol, the boot loader should
+also fill the additional fields of the struct boot_params as that
+described in zero-page.txt.
+
+After setupping the struct boot_params, the boot loader can load the
+32/64-bit kernel in the same way as that of 16-bit boot protocol.
+
+In 32-bit boot protocol, the kernel is started by jumping to the
+32-bit kernel entry point, which is the start address of loaded
+32/64-bit kernel.
+
+At entry, the CPU must be in 32-bit protected mode with paging
+disabled; a GDT must be loaded with the descriptors for selectors
+__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G flat
+segment; __BOOS_CS must have execute/read permission, and __BOOT_DS
+must have read/write permission; CS must be __BOOT_CS and DS, ES, SS
+must be __BOOT_DS; interrupt must be disabled; %esi must hold the base
+address of the struct boot_params; %ebp, %edi and %ebx must be zero.
diff --git a/Documentation/i386/zero-page.txt b/Documentation/i386/zero-page.txt
index 6c0817c..169ad42 100644
--- a/Documentation/i386/zero-page.txt
+++ b/Documentation/i386/zero-page.txt
@@ -1,99 +1,31 @@
----------------------------------------------------------------------------
-!!!!!!!!!!!!!!!WARNING!!!!!!!!
-The zero page is a kernel internal data structure, not a stable ABI. It might change
-without warning and the kernel has no way to detect old version of it.
-If you're writing some external code like a boot loader you should only use
-the stable versioned real mode boot protocol described in boot.txt. Otherwise the kernel
-might break you at any time.
-!!!!!!!!!!!!!WARNING!!!!!!!!!!!
-----------------------------------------------------------------------------
+The additional fields in struct boot_params as a part of 32-bit boot
+protocol of kernel. These should be filled by bootloader or 16-bit
+real-mode setup code of the kernel. References/settings to it mainly
+are in:
-Summary of boot_params layout (kernel point of view)
- ( collected by Hans Lermen and Martin Mares )
-
-The contents of boot_params are used to pass parameters from the
-16-bit realmode code of the kernel to the 32-bit part. References/settings
-to it mainly are in:
+ include/asm-x86/bootparam.h
- arch/i386/boot/setup.S
- arch/i386/boot/video.S
- arch/i386/kernel/head.S
- arch/i386/kernel/setup.c
-
-Offset Type Description
------- ---- -----------
- 0 32 bytes struct screen_info, SCREEN_INFO
- ATTENTION, overlaps the following !!!
- 2 unsigned short EXT_MEM_K, extended memory size in Kb (from int 0x15)
- 0x20 unsigned short CL_MAGIC, commandline magic number (=0xA33F)
- 0x22 unsigned short CL_OFFSET, commandline offset
- Address of commandline is calculated:
- 0x90000 + contents of CL_OFFSET
- (only taken, when CL_MAGIC = 0xA33F)
- 0x40 20 bytes struct apm_bios_info, APM_BIOS_INFO
- 0x60 16 bytes Intel SpeedStep (IST) BIOS support information
- 0x80 16 bytes hd0-disk-parameter from intvector 0x41
- 0x90 16 bytes hd1-disk-parameter from intvector 0x46
+Offset Proto Name Meaning
+/Size
- 0xa0 16 bytes System description table truncated to 16 bytes.
- ( struct sys_desc_table_struct )
- 0xb0 - 0x13f Free. Add more parameters here if you really need them.
- 0x140- 0x1be EDID_INFO Video mode setup
-
-0x1c4 unsigned long EFI system table pointer
-0x1c8 unsigned long EFI memory descriptor size
-0x1cc unsigned long EFI memory descriptor version
-0x1d0 unsigned long EFI memory descriptor map pointer
-0x1d4 unsigned long EFI memory descriptor map size
-0x1e0 unsigned long ALT_MEM_K, alternative mem check, in Kb
-0x1e4 unsigned long Scratch field for the kernel setup code
-0x1e8 char number of entries in E820MAP (below)
-0x1e9 unsigned char number of entries in EDDBUF (below)
-0x1ea unsigned char number of entries in EDD_MBR_SIG_BUFFER (below)
-0x1f1 char size of setup.S, number of sectors
-0x1f2 unsigned short MOUNT_ROOT_RDONLY (if !=0)
-0x1f4 unsigned short size of compressed kernel-part in the
- (b)zImage-file (in 16 byte units, rounded up)
-0x1f6 unsigned short swap_dev (unused AFAIK)
-0x1f8 unsigned short RAMDISK_FLAGS
-0x1fa unsigned short VGA-Mode (old one)
-0x1fc unsigned short ORIG_ROOT_DEV (high=Major, low=minor)
-0x1ff char AUX_DEVICE_INFO
-
-0x200 short jump to start of setup code aka "reserved" field.
-0x202 4 bytes Signature for SETUP-header, ="HdrS"
-0x206 unsigned short Version number of header format
- Current version is 0x0201...
-0x208 8 bytes (used by setup.S for communication with boot loaders,
- look there)
-0x210 char LOADER_TYPE, = 0, old one
- else it is set by the loader:
- 0xTV: T=0 for LILO
- 1 for Loadlin
- 2 for bootsect-loader
- 3 for SYSLINUX
- 4 for ETHERBOOT
- 5 for ELILO
- 7 for GRuB
- 8 for U-BOOT
- 9 for Xen
- V = version
-0x211 char loadflags:
- bit0 = 1: kernel is loaded high (bzImage)
- bit7 = 1: Heap and pointer (see below) set by boot
- loader.
-0x212 unsigned short (setup.S)
-0x214 unsigned long KERNEL_START, where the loader started the kernel
-0x218 unsigned long INITRD_START, address of loaded ramdisk image
-0x21c unsigned long INITRD_SIZE, size in bytes of ramdisk image
-0x220 4 bytes (setup.S)
-0x224 unsigned short setup.S heap end pointer
-0x226 unsigned short zero_pad
-0x228 unsigned long cmd_line_ptr
-0x22c unsigned long ramdisk_max
-0x230 16 bytes trampoline
-0x290 - 0x2cf EDD_MBR_SIG_BUFFER (edd.S)
-0x2d0 - 0xd00 E820MAP
-0xd00 - 0xeff EDDBUF (edd.S) for disk signature read sector
-0xd00 - 0xeeb EDDBUF (edd.S) for edd data
+000/040 ALL screen_info Text mode or frame buffer information
+ (struct screen_info)
+040/014 ALL apm_bios_info APM BIOS information (struct apm_bios_info)
+060/010 ALL ist_info Intel SpeedStep (IST) BIOS support information
+ (struct ist_info)
+080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!!
+090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!!
+0A0/010 ALL sys_desc_table System description table (struct sys_desc_table)
+140/080 ALL edid_info Video mode setup (struct edid_info)
+1C0/020 ALL efi_info EFI 32 information (struct efi_info)
+1E0/004 ALL alk_mem_k Alternative mem check, in KB
+1E4/004 ALL scratch Scratch field for the kernel setup code
+1E8/001 ALL e820_entries Number of entries in e820_map (below)
+1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below)
+1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer
+ (below)
+290/040 ALL edd_mbr_sig_buffer EDD MBR signatures
+2D0/A00 ALL e820_map E820 memory map table
+ (array of struct e820entry)
+D00/1EC ALL eddbuf EDD data (array of struct edd_info)
diff --git a/Documentation/ja_JP/SubmittingPatches b/Documentation/ja_JP/SubmittingPatches
new file mode 100644
index 0000000..a9dc124
--- /dev/null
+++ b/Documentation/ja_JP/SubmittingPatches
@@ -0,0 +1,556 @@
+NOTE:
+This is a version of Documentation/SubmittingPatches into Japanese.
+This document is maintained by Keiichi KII <k-keiichi@bx.jp.nec.com>
+and the JF Project team <http://www.linux.or.jp/JF/>.
+If you find any difference between this document and the original file
+or a problem with the translation,
+please contact the maintainer of this file or JF project.
+
+Please also note that the purpose of this file is to be easier to read
+for non English (read: Japanese) speakers and is not intended as a
+fork. So if you have any comments or updates of this file, please try
+to update the original English file first.
+
+Last Updated: 2007/10/24
+==================================
+これは、
+linux-2.6.23/Documentation/SubmittingPatches の和訳
+です。
+翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
+翻訳日： 2007/10/17
+翻訳者： Keiichi Kii <k-keiichi at bx dot jp dot nec dot com>
+校正者： Masanari Kobayashi さん <zap03216 at nifty dot ne dot jp>
+ Matsukura さん <nbh--mats at nifty dot com>
+==================================
+
+ Linux カーネルに変更を加えるための Howto
+ 又は
+ かの Linus Torvalds の取り扱い説明書
+
+Linux カーネルに変更を加えたいと思っている個人又は会社にとって、パッ
+チの投稿に関連した仕組みに慣れていなければ、その過程は時々みなさんを
+おじけづかせることもあります。この文章はあなたの変更を大いに受け入れ
+てもらえやすくする提案を集めたものです。
+
+コードを投稿する前に、Documentation/SubmitChecklist の項目リストに目
+を通してチェックしてください。もしあなたがドライバーを投稿しようとし
+ているなら、Documentation/SubmittingDrivers にも目を通してください。
+
+--------------------------------------------
+セクション1 パッチの作り方と送り方
+--------------------------------------------
+
+1) 「 diff -up 」
+------------
+
+パッチの作成には「 diff -up 」又は「 diff -uprN 」を使ってください。
+
+Linux カーネルに対する全ての変更は diff(1) コマンドによるパッチの形式で
+生成してください。パッチを作成するときには、diff(1) コマンドに「 -u 」引
+数を指定して、unified 形式のパッチを作成することを確認してください。また、
+変更がどの C 関数で行われたのかを表示する「 -p 」引数を使ってください。
+この引数は生成した差分をずっと読みやすくしてくれます。パッチは Linux
+カーネルソースの中のサブディレクトリではなく Linux カーネルソースのルート
+ディレクトリを基準にしないといけません。
+
+1個のファイルについてのパッチを作成するためには、ほとんどの場合、
+以下の作業を行えば十分です。
+
+ SRCTREE= linux-2.6
+ MYFILE= drivers/net/mydriver.c
+
+ cd $SRCTREE
+ cp $MYFILE $MYFILE.orig
+ vi $MYFILE # make your change
+ cd ..
+ diff -up $SRCTREE/$MYFILE{.orig,} > /tmp/patch
+
+複数のファイルについてのパッチを作成するためには、素の( vanilla )、す
+なわち変更を加えてない Linux カーネルを展開し、自分の Linux カーネル
+ソースとの差分を生成しないといけません。例えば、
+
+ MYSRC= /devel/linux-2.6
+
+ tar xvfz linux-2.6.12.tar.gz
+ mv linux-2.6.12 linux-2.6.12-vanilla
+ diff -uprN -X linux-2.6.12-vanilla/Documentation/dontdiff \
+ linux-2.6.12-vanilla $MYSRC > /tmp/patch
+
+dontdiff ファイルには Linux カーネルのビルドプロセスの過程で生成された
+ファイルの一覧がのっています。そして、それらはパッチを生成する diff(1)
+コマンドで無視されるべきです。dontdiff ファイルは 2.6.12 以後のバージョ
+ンの Linux カーネルソースツリーに含まれています。それより前のバージョン
+の Linux カーネルソースツリーに対する dontdiff ファイルは、
+<http://www.xenotime.net/linux/doc/dontdiff>から取得することができます。
+
+投稿するパッチの中に関係のない余分なファイルが含まれていないことを確
+認してください。diff(1) コマンドで生成したパッチがあなたの意図したとお
+りのものであることを確認してください。
+
+もしあなたのパッチが多くの差分を生み出すのであれば、あなたはパッチ
+を意味のあるひとまとまりごとに分けたいと思うかもしれません。
+これは他のカーネル開発者にとってレビューしやすくなるので、あなたの
+パッチを受け入れてもらうためにはとても重要なことです。これを補助でき
+る多くのスクリプトがあります。
+
+Quilt:
+http://savannah.nongnu.org/projects/quilt
+
+Andrew Morton's patch scripts:
+http://www.zip.com.au/~akpm/linux/patches/
+このリンクの先のスクリプトの代わりとして、quilt がパッチマネジメント
+ツールとして推奨されています(上のリンクを見てください)。
+
+2) パッチに対する説明
+
+パッチの中の変更点に対する技術的な詳細について説明してください。
+
+説明はできる限り具体的に。もっとも悪い説明は「ドライバー X を更新」、
+「ドライバー X に対するバグフィックス」あるいは「このパッチはサブシス
+テム X に対する更新を含んでいます。どうか取り入れてください。」などです。
+
+説明が長くなりだしたのであれば、おそらくそれはパッチを分ける必要がある
+という兆候です。次の #3 を見てください。
+
+3) パッチの分割
+
+意味のあるひとまとまりごとに変更を個々のパッチファイルに分けてください。
+
+例えば、もし1つのドライバーに対するバグフィックスとパフォーマンス強
+化の両方の変更を含んでいるのであれば、その変更を2つ以上のパッチに分
+けてください。もし変更箇所に API の更新と、その新しい API を使う新たな
+ドライバーが含まれているなら、2つのパッチに分けてください。
+
+一方で、もしあなたが多数のファイルに対して意味的に同じ1つの変更を加え
+るのであれば、その変更を1つのパッチにまとめてください。言いかえると、
+意味的に同じ1つの変更は1つのパッチの中に含まれます。
+
+あるパッチが変更を完結させるために他のパッチに依存していたとしても、
+それは問題ありません。パッチの説明の中で「このパッチはパッチ X に依存
+している」と簡単に注意書きをつけてください。
+
+もしパッチをより小さなパッチの集合に凝縮することができないなら、まずは
+15かそこらのパッチを送り、そのレビューと統合を待って下さい。
+
+4) パッチのスタイルチェック
+
+あなたのパッチが基本的な( Linux カーネルの)コーディングスタイルに違反し
+ていないかをチェックして下さい。その詳細を Documentation/CodingStyle で
+見つけることができます。コーディングスタイルの違反はレビューする人の
+時間を無駄にするだけなので、恐らくあなたのパッチは読まれることすらなく
+拒否されるでしょう。
+
+あなたはパッチを投稿する前に最低限パッチスタイルチェッカー
+( scripts/patchcheck.pl )を利用してパッチをチェックすべきです。
+もしパッチに違反がのこっているならば、それらの全てについてあなたは正当な
+理由を示せるようにしておく必要があります。
+
+5) 電子メールの宛先の選び方
+
+MAINTAINERS ファイルとソースコードに目を通してください。そして、その変
+更がメンテナのいる特定のサブシステムに加えられるものであることが分か
+れば、その人に電子メールを送ってください。
+
+もし、メンテナが載っていなかったり、メンテナからの応答がないなら、
+LKML ( linux-kernel@vger.kernel.org )へパッチを送ってください。ほとんど
+のカーネル開発者はこのメーリングリストに目を通しており、変更に対して
+コメントを得ることができます。
+
+15個より多くのパッチを同時に vger.kernel.org のメーリングリストへ送らな
+いでください!!!
+
+Linus Torvalds は Linux カーネルに入る全ての変更に対する最終的な意思決定者
+です。電子メールアドレスは torvalds@linux-foundation.org になります。彼は
+多くの電子メールを受け取っているため、できる限り彼に電子メールを送るのは
+避けるべきです。
+
+バグフィックスであったり、自明な変更であったり、話し合いをほとんど
+必要としないパッチは Linus へ電子メールを送るか CC しなければなりません。
+話し合いを必要としたり、明確なアドバンテージがないパッチは、通常まず
+は LKML へ送られるべきです。パッチが議論された後にだけ、そのパッチを
+Linus へ送るべきです。
+
+6) CC (カーボンコピー)先の選び方
+
+特に理由がないなら、LKML にも CC してください。
+
+Linus 以外のカーネル開発者は変更に気づく必要があり、その結果、彼らはそ
+の変更に対してコメントをくれたり、コードに対してレビューや提案をくれ
+るかもしれません。LKML とは Linux カーネル開発者にとって一番中心的なメー
+リングリストです。USB やフレームバッファデバイスや VFS や SCSI サブシステ
+ムなどの特定のサブシステムに関するメーリングリストもあります。あなた
+の変更に、はっきりと関連のあるメーリングリストについて知りたければ
+MAINTAINERS ファイルを参照してください。
+
+VGER.KERNEL.ORG でホスティングされているメーリングリストの一覧が下記の
+サイトに載っています。
+<http://vger.kernel.org/vger-lists.html>
+
+もし、変更がユーザランドのカーネルインタフェースに影響を与え
+るのであれば、MAN-PAGES のメンテナ( MAINTAINERS ファイルに一覧
+があります)に man ページのパッチを送ってください。少なくとも
+情報がマニュアルページの中に入ってくるように、変更が起きたという
+通知を送ってください。
+
+たとえ、メンテナが #4 で反応がなかったとしても、メンテナのコードに変更を
+加えたときには、いつもメンテナに CC するのを忘れないようにしてください。
+
+小さなパッチであれば、Adrian Bunk が管理している Trivial Patch Monkey
+(ちょっとしたパッチを集めている)<trivial@kernel.org>に CC してもいい
+です。ちょっとしたパッチとは以下のルールのどれか1つを満たしていなけ
+ればなりません。
+ ・ドキュメントのスペルミスの修正
+ ・grep(1) コマンドによる検索を困難にしているスペルの修正
+ ・コンパイル時の警告の修正(無駄な警告が散乱することは好ましくないた
+ めです)
+ ・コンパイル問題の修正(それらの修正が本当に正しい場合に限る)
+ ・実行時の問題の修正(それらの修正が本当に問題を修正している場合に限る)
+ ・廃止予定の関数やマクロを使用しているコードの除去(例 check_region )
+ ・問い合わせ先やドキュメントの修正
+ ・移植性のないコードから移植性のあるコードへの置き換え(小さい範囲で
+ あればアーキテクチャ特有のことでも他の人がコピーできます)
+ ・作者やメンテナによる修正(すなわち patch monkey の再転送モード)
+URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/>
+
+7) MIME やリンクや圧縮ファイルや添付ファイルではなくプレインテキストのみ
+
+Linus や他のカーネル開発者はあなたが投稿した変更を読んで、コメントでき
+る必要があります。カーネル開発者にとって、あなたが書いたコードの特定の
+部分にコメントをするために、標準的な電子メールクライアントで変更が引用
+できることは重要です。
+
+上記の理由で、すべてのパッチは文中に含める形式の電子メールで投稿さ
+れるべきです。警告：あなたがパッチをコピー&ペーストする際には、パッ
+チを改悪するエディターの折り返し機能に注意してください。
+
+パッチを圧縮の有無に関わらず MIME 形式で添付しないでください。多くのポ
+ピュラーな電子メールクライアントは MIME 形式の添付ファイルをプレーンテ
+キストとして送信するとは限らないでしょう。そうなると、電子メールクラ
+イアントがコードに対するコメントを付けることをできなくします。また、
+MIME 形式の添付ファイルは Linus に手間を取らせることになり、その変更を
+受け入れてもらう可能性が低くなってしまいます。
+
+例外：お使いの電子メールクライアントがパッチをめちゃくちゃにするので
+あれば、誰かが MIME 形式のパッチを再送するよう求めるかもしれません。
+
+警告： Mozilla のような特定の電子メールクライアントは電子メールの
+ヘッダに以下のものを付加して送ります。
+---- message header ----
+Content-Type: text/plain; charset=us-ascii; format=flowed
+---- message header ----
+問題は、「 format=flowed 」が付いた電子メールを特定の受信側の電子メール
+クライアントがタブをスペースに置き換えるというような変更をすることです。
+したがって送られてきたパッチは壊れているように見えるでしょう。
+
+これを修正するには、mozilla の defaults/pref/mailnews.js ファイルを
+以下のように修正します。
+pref("mailnews.send_plaintext_flowed", false); // RFC 2646=======
+pref("mailnews.display.disable_format_flowed_support", true);
+
+8) 電子メールのサイズ
+
+パッチを Linus へ送るときは常に #7 の手順に従ってください。
+
+大きなパッチはメーリングリストやメンテナにとって不親切です。パッチが
+未圧縮で 40KB を超えるようであるなら、インターネット上のアクセス可能な
+サーバに保存し、保存場所を示す URL を伝えるほうが適切です。
+
+9) カーネルバージョンの明記
+
+パッチが対象とするカーネルのバージョンをパッチの概要か電子メールの
+サブジェクトに付けることが重要です。
+
+パッチが最新バージョンのカーネルに正しく適用できなければ、Linus は
+そのパッチを採用しないでしょう。
+
+10) がっかりせず再投稿
+
+パッチを投稿した後は、辛抱強く待っていてください。Linus があなたのパッ
+チを気に入って採用すれば、Linus がリリースする次のバージョンのカーネル
+の中で姿を見せるでしょう。
+
+しかし、パッチが次のバージョンのカーネルに入っていないなら、いくつもの
+理由があるのでしょう。その原因を絞り込み、間違っているものを正し、更新
+したパッチを投稿するのはあなたの仕事です。
+
+Linus があなたのパッチに対して何のコメントもなく不採用にすることは極め
+て普通のことです。それは自然な姿です。もし、Linus があなたのパッチを受
+け取っていないのであれば、以下の理由が考えられます。
+* パッチが最新バージョンの Linux カーネルにきちんと適用できなかった
+* パッチが LKML で十分に議論されていなかった
+* スタイルの問題(セクション2を参照)
+* 電子メールフォーマットの問題(このセクションを参照)
+* パッチに対する技術的な問題
+* Linus はたくさんの電子メールを受け取っているので、どさくさに紛れて見
+ 失った
+* 不愉快にさせている
+
+判断できない場合は、LKML にコメントを頼んでください。
+
+11) サブジェクトに「 PATCH 」
+
+Linus や LKML への大量の電子メールのために、サブジェクトのプレフィックスに
+「 [PATCH] 」を付けることが慣習となっています。これによって Linus や他の
+カーネル開発者がパッチであるのか、又は、他の議論に関する電子メールであるの
+かをより簡単に識別できます。
+
+12) パッチへの署名
+
+誰が何をしたのかを追いかけやすくするために (特に、パッチが何人かの
+メンテナを経て最終的に Linux カーネルに取り込まれる場合のために)、電子
+メールでやり取りされるパッチに対して「 sign-off 」という手続きを導入し
+ました。
+
+「 sign-off 」とは、パッチがあなたの書いたものであるか、あるいは、
+あなたがそのパッチをオープンソースとして提供する権利を保持している、
+という証明をパッチの説明の末尾に一行記載するというものです。
+ルールはとても単純です。以下の項目を確認して下さい。
+
+ 原作者の証明書( DCO ) 1.1
+
+ このプロジェクトに寄与するものとして、以下のことを証明する。
+
+ (a) 本寄与は私が全体又は一部作成したものであり、私がそのファイ
+ ル中に明示されたオープンソースライセンスの下で公開する権利
+ を持っている。もしくは、
+
+ (b) 本寄与は、私が知る限り、適切なオープンソースライセンスでカバ
+ ーされている既存の作品を元にしている。同時に、私はそのライセ
+ ンスの下で、私が全体又は一部作成した修正物を、ファイル中で示
+ される同一のオープンソースライセンスで(異なるライセンスの下で
+ 投稿することが許可されている場合を除いて)投稿する権利を持って
+ いる。もしくは、
+
+ (c) 本寄与は(a)、(b)、(c)を証明する第3者から私へ直接提供された
+ ものであり、私はそれに変更を加えていない。
+
+ (d) 私はこのプロジェクトと本寄与が公のものであることに理解及び同意す
+ る。同時に、関与した記録(投稿の際の全ての個人情報と sign-off を
+ 含む)が無期限に保全されることと、当該プロジェクト又は関連する
+ オープンソースライセンスに沿った形で再配布されることに理解及び
+ 同意する。
+
+もしこれに同意できるなら、以下のような1行を追加してください。
+
+ Signed-off-by: Random J Developer <random@developer.example.org>
+
+実名を使ってください。(残念ですが、偽名や匿名による寄与はできません。)
+
+人によっては sign-off の近くに追加のタグを付加しています。それらは今のところ
+無視されますが、あなたはそのタグを社内の手続きに利用したり、sign-off に特別
+な情報を示したりすることができます。
+
+13) いつ Acked-by: を使うのか
+
+「 Signed-off-by: 」タグはその署名者がパッチの開発に関わっていたことやパッチ
+の伝播パスにいたことを示しています。
+
+ある人が直接パッチの準備や作成に関わっていないけれど、その人のパッチに対す
+る承認を記録し、示したいとします。その場合、その人を示すのに Acked-by: が使
+えます。Acked-by: はパッチのチェンジログにも追加されます。
+
+パッチの影響を受けるコードのメンテナがパッチに関わっていなかったり、パッチ
+の伝播パスにいなかった時にも、メンテナは Acked-by: をしばしば利用します。
+
+Acked-by: は Signed-off-by: のように公式なタグではありません。それはメンテナが
+少なくともパッチをレビューし、同意を示しているという記録です。そのような
+ことからパッチの統合者がメンテナの「うん、良いと思うよ」という発言を
+Acked-by: へ置き換えることがあります。
+
+Acked-by: が必ずしもパッチ全体の承認を示しているわけではありません。例えば、
+あるパッチが複数のサブシステムへ影響を与えており、その中の1つのサブシステム
+のメンテナからの Acked-by: を持っているとします。その場合、Acked-by: は通常
+そのメンテナのコードに影響を与える一部分だけに対する承認を示しています。
+この点は、ご自分で判断してください。(その Acked-by: が)疑わしい場合は、
+メーリングリストアーカイブの中の大元の議論を参照すべきです。
+
+14) 標準的なパッチのフォーマット
+
+標準的なパッチのサブジェクトは以下のとおりです。
+
+ Subject: [PATCH 001/123] subsystem: summary phrase
+
+標準的なパッチの、電子メールのボディは以下の項目を含んでいます。
+
+ - パッチの作成者を明記する「 from 」行
+
+ - 空行
+
+ - 説明本体。これはこのパッチを説明するために無期限のチェンジログ
+ (変更履歴)にコピーされます。
+
+ - 上述した「 Signed-off-by: 」行。これも説明本体と同じくチェン
+ ジログ内にコピーされます。
+
+ - マーカー行は単純に「 --- 」です。
+
+ - 余計なコメントは、チェンジログには不適切です。
+
+ - 実際のパッチ(差分出力)
+
+サブジェクト行のフォーマットは、アルファベット順で電子メールをとても
+ソートしやすいものになっています。(ほとんどの電子メールクライアント
+はソートをサポートしています)パッチのサブジェクトの連番は0詰めであ
+るため、数字でのソートとアルファベットでのソートは同じ結果になります。
+
+電子メールのサブジェクト内のサブシステム表記は、パッチが適用される
+分野またはサブシステムを識別できるようにすべきです。
+
+電子メールのサブジェクトの「概要の言い回し」はそのパッチの概要を正確
+に表現しなければなりません。「概要の言い回し」をファイル名にしてはい
+けません。一連のパッチ中でそれぞれのパッチは同じ「概要の言い回し」を
+使ってはいけません(「一連のパッチ」とは順序付けられた関連のある複数の
+パッチ群です)。
+
+あなたの電子メールの「概要の言い回し」がそのパッチにとって世界で唯
+一の識別子になるように心がけてください。「概要の言い回し」は git の
+チェンジログの中へずっと伝播していきます。「概要の言い回し」は、開
+発者が後でパッチを参照するために議論の中で利用するかもしれません。
+人々はそのパッチに関連した議論を読むために「概要の言い回し」を使って
+google で検索したがるでしょう。
+
+サブジェクトの例を二つ
+
+ Subject: [patch 2/5] ext2: improve scalability of bitmap searching
+ Subject: [PATCHv2 001/207] x86: fix eflags tracking
+
+「 from 」行は電子メールのボディの一番最初の行でなければなりません。
+その形式は以下のとおりです。
+
+ From: Original Author <author@example.com>
+
+「 from 」行はチェンジログの中で、そのパッチの作成者としてクレジットされ
+ている人を特定するものです。「 from 」行がかけていると、電子メールのヘッ
+ダーの「 From: 」が、チェンジログの中でパッチの作成者を決定するために使わ
+れるでしょう。
+
+説明本体は無期限のソースのチェンジログにコミットされます。なので、説明
+本体はそのパッチに至った議論の詳細を忘れているある程度の技量を持っている人
+がその詳細を思い出すことができるものでなければなりません。
+
+「 --- 」マーカー行はパッチ処理ツールに対して、チェンジログメッセージの終端
+部分を認識させるという重要な役目を果たします。
+
+「 --- 」マーカー行の後の追加コメントの良い使用方法の1つに diffstat コマンド
+があります。diffstat コマンドとは何のファイルが変更され、1ファイル当たり何行
+追加され何行消されたかを示すものです。diffstat コマンドは特に大きなパッチに
+おいて役立ちます。その時点でだけ又はメンテナにとってのみ関係のあるコメント
+は無期限に保存されるチェンジログにとって適切ではありません。そのため、この
+ようなコメントもマーカー行の後に書かれるべきです。ファイル名はカーネルソー
+スツリーのトップディレクトリからの表記でリストされるため、横方向のスペース
+をとり過ぎないように、diffstat コマンドにオプション「 -p 1 -w 70 」を指定し
+てください(インデントを含めてちょうど80列に合うでしょう)。
+
+適切なパッチのフォーマットの詳細についてはセクション3の参考文献を参照して
+ください。
+
+------------------------------------
+セクション2 - ヒントとTIPSと小技
+------------------------------------
+
+このセクションは Linux カーネルに変更を適用することに関係のある一般的な
+「お約束」の多くを載せています。物事には例外というものがあります。しか
+し例外を適用するには、本当に妥当な理由が不可欠です。あなたは恐らくこの
+セクションを Linus のコンピュータ・サイエンス101と呼ぶでしょう。
+
+1) Documentation/CodingStyleを参照
+
+言うまでもなく、あなたのコードがこのコーディングスタイルからあまりに
+も逸脱していると、レビューやコメントなしに受け取ってもらえないかもし
+れません。
+
+唯一の特筆すべき例外は、コードをあるファイルから別のファイルに移動
+するときです。この場合、コードを移動するパッチでは、移動されるコード
+に関して移動以外の変更を一切加えるべきではありません。これにより、
+コードの移動とあなたが行ったコードの修正を明確に区別できるようにな
+ります。これは実際に何が変更されたかをレビューする際の大きな助けに
+なるとともに、ツールにコードの履歴を追跡させることも容易になります。
+
+投稿するより前にパッチのスタイルチェッカー( scripts/checkpatch.pl )で
+あなたのパッチをチェックしてください。このスタイルチェッカーは最終結
+論としてではなく、指標としてみるべきです。もし、あなたのコードが違反
+はしているが修正するより良く見えるのであれば、おそらくそのままにする
+のがベストです。
+
+スタイルチェッカーによる3段階のレポート:
+ - エラー: 間違っている可能性が高い
+ - 警告：注意してレビューする必要がある
+ - チェック：考慮する必要がある
+
+あなたはパッチに残っている全ての違反について、それがなぜ必要なのか正当な
+理由を示せるようにしておく必要があります。
+
+2) #ifdefは見苦しい
+
+ifdef が散乱したコードは、読むのもメンテナンスするのも面倒です。コードの中
+で ifdef を使わないでください。代わりに、ヘッダファイルの中に ifdef を入れて、
+条件付きで、コードの中で使われる関数を「 static inline 」関数かマクロで定義し
+てください。後はコンパイラが、何もしない箇所を最適化して取り去ってくれるで
+しょう。
+
+まずいコードの簡単な例
+
+ dev = alloc_etherdev (sizeof(struct funky_private));
+ if (!dev)
+ return -ENODEV;
+ #ifdef CONFIG_NET_FUNKINESS
+ init_funky_net(dev);
+ #endif
+
+クリーンアップしたコードの例
+
+(in header)
+ #ifndef CONFIG_NET_FUNKINESS
+ static inline void init_funky_net (struct net_device *d) {}
+ #endif
+
+(in the code itself)
+ dev = alloc_etherdev (sizeof(struct funky_private));
+ if (!dev)
+ return -ENODEV;
+ init_funky_net(dev);
+
+3) マクロより「 static inline 」を推奨
+
+「 static inline 」関数はマクロよりもずっと推奨されています。それらは、
+型安全性があり、長さにも制限が無く、フォーマットの制限もありません。
+gcc においては、マクロと同じくらい軽いです。
+
+マクロは「 static inline 」が明らかに不適切であると分かる場所(高速化パスの
+いくつかの特定のケース)や「 static inline 」関数を使うことができないような
+場所(マクロの引数の文字列連結のような)にだけ使われるべきです。
+
+「 static inline 」は「 static __inline__ 」や「 extern inline 」や
+「 extern __inline__ 」よりも適切です。
+
+4) 設計に凝りすぎるな
+
+それが有用になるかどうか分からないような不明瞭な将来を見越した設計
+をしないでください。「できる限り簡単に、そして、それ以上簡単になら
+ないような設計をしてください。」
+
+----------------------
+セクション3 参考文献
+----------------------
+
+Andrew Morton, "The perfect patch" (tpp).
+ <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt>
+
+Jeff Garzik, "Linux kernel patch submission format".
+ <http://linux.yyz.us/patch-format.html>
+
+Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer".
+ <http://www.kroah.com/log/2005/03/31/>
+ <http://www.kroah.com/log/2005/07/08/>
+ <http://www.kroah.com/log/2005/10/19/>
+ <http://www.kroah.com/log/2006/01/11/>
+
+NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
+ <http://marc.theaimsgroup.com/?l=linux-kernel&m=112112749912944&w=2>
+
+Kernel Documentation/CodingStyle:
+ <http://users.sosdg.org/~qiyong/lxr/source/Documentation/CodingStyle>
+
+Linus Torvalds's mail on the canonical patch format:
+ <http://lkml.org/lkml/2005/4/7/183>
+--
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a13d69b..33121d6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -586,11 +586,6 @@
eata= [HW,SCSI]
- ec_intr= [HW,ACPI] ACPI Embedded Controller interrupt mode
- Format: <int>
- 0: polling mode
- non-0: interrupt mode (default)
-
edd= [EDD]
Format: {"of[f]" | "sk[ipmbr]"}
See comment in arch/i386/boot/edd.S
@@ -1444,7 +1439,8 @@
Param: "schedule" - profile schedule points.
Param: <number> - step/bucket size as a power of 2 for
statistical time based profiling.
- Param: "sleep" - profile D-state sleeping (millisecs)
+ Param: "sleep" - profile D-state sleeping (millisecs).
+ Requires CONFIG_SCHEDSTATS
Param: "kvm" - profile VM exits.
processor.max_cstate= [HW,ACPI]
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 5bdc37f..f266839 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -34,25 +34,24 @@
#include <zlib.h>
#include <assert.h>
#include <sched.h>
-/*L:110 We can ignore the 30 include files we need for this program, but I do
- * want to draw attention to the use of kernel-style types.
- *
- * As Linus said, "C is a Spartan language, and so should your naming be." I
- * like these abbreviations and the header we need uses them, so we define them
- * here.
- */
-typedef unsigned long long u64;
-typedef uint32_t u32;
-typedef uint16_t u16;
-typedef uint8_t u8;
#include "linux/lguest_launcher.h"
-#include "linux/pci_ids.h"
#include "linux/virtio_config.h"
#include "linux/virtio_net.h"
#include "linux/virtio_blk.h"
#include "linux/virtio_console.h"
#include "linux/virtio_ring.h"
#include "asm-x86/bootparam.h"
+/*L:110 We can ignore the 38 include files we need for this program, but I do
+ * want to draw attention to the use of kernel-style types.
+ *
+ * As Linus said, "C is a Spartan language, and so should your naming be." I
+ * like these abbreviations, so we define them here. Note that u64 is always
+ * unsigned long long, which works on all Linux systems: this means that we can
+ * use %llu in printf for any u64. */
+typedef unsigned long long u64;
+typedef uint32_t u32;
+typedef uint16_t u16;
+typedef uint8_t u8;
/*:*/
#define PAGE_PRESENT 0x7 /* Present, RW, Execute */
@@ -361,8 +360,8 @@
}
/*L:140 Loading the kernel is easy when it's a "vmlinux", but most kernels
- * come wrapped up in the self-decompressing "bzImage" format. With some funky
- * coding, we can load those, too. */
+ * come wrapped up in the self-decompressing "bzImage" format. With a little
+ * work, we can load those, too. */
static unsigned long load_kernel(int fd)
{
Elf32_Ehdr hdr;
@@ -465,6 +464,7 @@
* to know where it is. */
return to_guest_phys(pgdir);
}
+/*:*/
/* Simple routine to roll all the commandline arguments together with spaces
* between them. */
@@ -481,9 +481,9 @@
dst[len] = '\0';
}
-/* This is where we actually tell the kernel to initialize the Guest. We saw
- * the arguments it expects when we looked at initialize() in lguest_user.c:
- * the base of guest "physical" memory, the top physical page to allow, the
+/*L:185 This is where we actually tell the kernel to initialize the Guest. We
+ * saw the arguments it expects when we looked at initialize() in lguest_user.c:
+ * the base of Guest "physical" memory, the top physical page to allow, the
* top level pagetable and the entry point for the Guest. */
static int tell_kernel(unsigned long pgdir, unsigned long start)
{
@@ -513,13 +513,14 @@
/*L:200
* The Waker.
*
- * With a console and network devices, we can have lots of input which we need
- * to process. We could try to tell the kernel what file descriptors to watch,
- * but handing a file descriptor mask through to the kernel is fairly icky.
+ * With console, block and network devices, we can have lots of input which we
+ * need to process. We could try to tell the kernel what file descriptors to
+ * watch, but handing a file descriptor mask through to the kernel is fairly
+ * icky.
*
* Instead, we fork off a process which watches the file descriptors and writes
- * the LHREQ_BREAK command to the /dev/lguest filedescriptor to tell the Host
- * loop to stop running the Guest. This causes it to return from the
+ * the LHREQ_BREAK command to the /dev/lguest file descriptor to tell the Host
+ * stop running the Guest. This causes the Launcher to return from the
* /dev/lguest read with -EAGAIN, where it will write to /dev/lguest to reset
* the LHREQ_BREAK and wake us up again.
*
@@ -545,7 +546,9 @@
if (read(pipefd, &fd, sizeof(fd)) == 0)
exit(0);
/* Otherwise it's telling us to change what file
- * descriptors we're to listen to. */
+ * descriptors we're to listen to. Positive means
+ * listen to a new one, negative means stop
+ * listening. */
if (fd >= 0)
FD_SET(fd, &devices.infds);
else
@@ -560,7 +563,7 @@
{
int pipefd[2], child;
- /* We create a pipe to talk to the waker, and also so it knows when the
+ /* We create a pipe to talk to the Waker, and also so it knows when the
* Launcher dies (and closes pipe). */
pipe(pipefd);
child = fork();
@@ -568,7 +571,8 @@
err(1, "forking");
if (child == 0) {
- /* Close the "writing" end of our copy of the pipe */
+ /* We are the Waker: close the "writing" end of our copy of the
+ * pipe and start waiting for input. */
close(pipefd[1]);
wake_parent(pipefd[0], lguest_fd);
}
@@ -579,12 +583,12 @@
return pipefd[1];
}
-/*L:210
+/*
* Device Handling.
*
- * When the Guest sends DMA to us, it sends us an array of addresses and sizes.
+ * When the Guest gives us a buffer, it sends an array of addresses and sizes.
* We need to make sure it's not trying to reach into the Launcher itself, so
- * we have a convenient routine which check it and exits with an error message
+ * we have a convenient routine which checks it and exits with an error message
* if something funny is going on:
*/
static void *_check_pointer(unsigned long addr, unsigned int size,
@@ -601,7 +605,9 @@
/* A macro which transparently hands the line number to the real function. */
#define check_pointer(addr,size) _check_pointer(addr, size, __LINE__)
-/* This function returns the next descriptor in the chain, or vq->vring.num. */
+/* Each buffer in the virtqueues is actually a chain of descriptors. This
+ * function returns the next descriptor in the chain, or vq->vring.num if we're
+ * at the end. */
static unsigned next_desc(struct virtqueue *vq, unsigned int i)
{
unsigned int next;
@@ -680,13 +686,14 @@
return head;
}
-/* Once we've used one of their buffers, we tell them about it. We'll then
+/* After we've used one of their buffers, we tell them about it. We'll then
* want to send them an interrupt, using trigger_irq(). */
static void add_used(struct virtqueue *vq, unsigned int head, int len)
{
struct vring_used_elem *used;
- /* Get a pointer to the next entry in the used ring. */
+ /* The virtqueue contains a ring of used buffers. Get a pointer to the
+ * next entry in that used ring. */
used = &vq->vring.used->ring[vq->vring.used->idx % vq->vring.num];
used->id = head;
used->len = len;
@@ -700,6 +707,7 @@
{
unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
+ /* If they don't want an interrupt, don't send one. */
if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
return;
@@ -716,8 +724,11 @@
trigger_irq(fd, vq);
}
-/* Here is the input terminal setting we save, and the routine to restore them
- * on exit so the user can see what they type next. */
+/*
+ * The Console
+ *
+ * Here is the input terminal setting we save, and the routine to restore them
+ * on exit so the user gets their terminal back. */
static struct termios orig_term;
static void restore_term(void)
{
@@ -818,7 +829,10 @@
}
}
-/* Handling output for network is also simple: we get all the output buffers
+/*
+ * The Network
+ *
+ * Handling output for network is also simple: we get all the output buffers
* and write them (ignoring the first element) to this device's file descriptor
* (stdout). */
static void handle_net_output(int fd, struct virtqueue *vq)
@@ -831,8 +845,9 @@
while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) {
if (in)
errx(1, "Input buffers in output queue?");
- /* Check header, but otherwise ignore it (we said we supported
- * no features). */
+ /* Check header, but otherwise ignore it (we told the Guest we
+ * supported no features, so it shouldn't have anything
+ * interesting). */
(void)convert(&iov[0], struct virtio_net_hdr);
len = writev(vq->dev->fd, iov+1, out-1);
add_used_and_trigger(fd, vq, head, len);
@@ -883,7 +898,8 @@
return true;
}
-/* This callback ensures we try again, in case we stopped console or net
+/*L:215 This is the callback attached to the network and console input
+ * virtqueues: it ensures we try again, in case we stopped console or net
* delivery because Guest didn't have any buffers. */
static void enable_fd(int fd, struct virtqueue *vq)
{
@@ -919,7 +935,7 @@
strnlen(from_guest_phys(addr), guest_limit - addr));
}
-/* This is called when the waker wakes us up: check for incoming file
+/* This is called when the Waker wakes us up: check for incoming file
* descriptors. */
static void handle_input(int fd)
{
@@ -986,8 +1002,7 @@
}
/* Each device descriptor is followed by some configuration information.
- * The first byte is a "status" byte for the Guest to report what's happening.
- * After that are fields: u8 type, u8 len, [... len bytes...].
+ * Each configuration field looks like: u8 type, u8 len, [... len bytes...].
*
* This routine adds a new field to an existing device's descriptor. It only
* works for the last device, but that's OK because that's how we use it. */
@@ -1044,14 +1059,17 @@
/* Link virtqueue back to device. */
vq->dev = dev;
- /* Set up handler. */
+ /* Set the routine to call when the Guest does something to this
+ * virtqueue. */
vq->handle_output = handle_output;
+
+ /* Set the "Don't Notify Me" flag if we don't have a handler */
if (!handle_output)
vq->vring.used->flags = VRING_USED_F_NO_NOTIFY;
}
/* This routine does all the creation and setup of a new device, including
- * caling new_dev_desc() to allocate the descriptor and device memory. */
+ * calling new_dev_desc() to allocate the descriptor and device memory. */
static struct device *new_device(const char *name, u16 type, int fd,
bool (*handle_input)(int, struct device *))
{
@@ -1060,7 +1078,7 @@
/* Append to device list. Prepending to a single-linked list is
* easier, but the user expects the devices to be arranged on the bus
* in command-line order. The first network device on the command line
- * is eth0, the first block device /dev/lgba, etc. */
+ * is eth0, the first block device /dev/vda, etc. */
*devices.lastdev = dev;
dev->next = NULL;
devices.lastdev = &dev->next;
@@ -1104,7 +1122,7 @@
/* The console needs two virtqueues: the input then the output. When
* they put something the input queue, we make sure we're listening to
* stdin. When they put something in the output queue, we write it to
- * stdout. */
+ * stdout. */
add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
add_virtqueue(dev, VIRTQUEUE_NUM, handle_console_output);
@@ -1252,21 +1270,17 @@
verbose("attached to bridge: %s\n", br_name);
}
-
-/*
- * Block device.
+/* Our block (disk) device should be really simple: the Guest asks for a block
+ * number and we read or write that position in the file. Unfortunately, that
+ * was amazingly slow: the Guest waits until the read is finished before
+ * running anything else, even if it could have been doing useful work.
*
- * Serving a block device is really easy: the Guest asks for a block number and
- * we read or write that position in the file.
- *
- * Unfortunately, this is amazingly slow: the Guest waits until the read is
- * finished before running anything else, even if it could be doing useful
- * work. We could use async I/O, except it's reputed to suck so hard that
- * characters actually go missing from your code when you try to use it.
+ * We could use async I/O, except it's reputed to suck so hard that characters
+ * actually go missing from your code when you try to use it.
*
* So we farm the I/O out to thread, and communicate with it via a pipe. */
-/* This hangs off device->priv, with the data. */
+/* This hangs off device->priv. */
struct vblk_info
{
/* The size of the file. */
@@ -1282,8 +1296,14 @@
* Launcher triggers interrupt to Guest. */
int done_fd;
};
+/*:*/
-/* This is the core of the I/O thread. It returns true if it did something. */
+/*L:210
+ * The Disk
+ *
+ * Remember that the block device is handled by a separate I/O thread. We head
+ * straight into the core of that thread here:
+ */
static bool service_io(struct device *dev)
{
struct vblk_info *vblk = dev->priv;
@@ -1294,10 +1314,14 @@
struct iovec iov[dev->vq->vring.num];
off64_t off;
+ /* See if there's a request waiting. If not, nothing to do. */
head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
if (head == dev->vq->vring.num)
return false;
+ /* Every block request should contain at least one output buffer
+ * (detailing the location on disk and the type of request) and one
+ * input buffer (to hold the result). */
if (out_num == 0 || in_num == 0)
errx(1, "Bad virtblk cmd %u out=%u in=%u",
head, out_num, in_num);
@@ -1306,10 +1330,15 @@
in = convert(&iov[out_num+in_num-1], struct virtio_blk_inhdr);
off = out->sector * 512;
- /* This is how we implement barriers. Pretty poor, no? */
+ /* The block device implements "barriers", where the Guest indicates
+ * that it wants all previous writes to occur before this write. We
+ * don't have a way of asking our kernel to do a barrier, so we just
+ * synchronize all the data in the file. Pretty poor, no? */
if (out->type & VIRTIO_BLK_T_BARRIER)
fdatasync(vblk->fd);
+ /* In general the virtio block driver is allowed to try SCSI commands.
+ * It'd be nice if we supported eject, for example, but we don't. */
if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
fprintf(stderr, "Scsi commands unsupported\n");
in->status = VIRTIO_BLK_S_UNSUPP;
@@ -1375,7 +1404,7 @@
/* When this read fails, it means Launcher died, so we follow. */
while (read(vblk->workpipe[0], &c, 1) == 1) {
- /* We acknowledge each request immediately, to reduce latency,
+ /* We acknowledge each request immediately to reduce latency,
* rather than waiting until we've done them all. I haven't
* measured to see if it makes any difference. */
while (service_io(dev))
@@ -1384,12 +1413,14 @@
return 0;
}
-/* When the thread says some I/O is done, we interrupt the Guest. */
+/* Now we've seen the I/O thread, we return to the Launcher to see what happens
+ * when the thread tells us it's completed some I/O. */
static bool handle_io_finish(int fd, struct device *dev)
{
char c;
- /* If child died, presumably it printed message. */
+ /* If the I/O thread died, presumably it printed the error, so we
+ * simply exit. */
if (read(dev->fd, &c, 1) != 1)
exit(1);
@@ -1398,7 +1429,7 @@
return true;
}
-/* When the Guest submits some I/O, we wake the I/O thread. */
+/* When the Guest submits some I/O, we just need to wake the I/O thread. */
static void handle_virtblk_output(int fd, struct virtqueue *vq)
{
struct vblk_info *vblk = vq->dev->priv;
@@ -1410,7 +1441,7 @@
exit(1);
}
-/* This creates a virtual block device. */
+/*L:198 This actually sets up a virtual block device. */
static void setup_block_file(const char *filename)
{
int p[2];
@@ -1426,7 +1457,7 @@
/* The device responds to return from I/O thread. */
dev = new_device("block", VIRTIO_ID_BLOCK, p[0], handle_io_finish);
- /* The device has a virtqueue. */
+ /* The device has one virtqueue, where the Guest places requests. */
add_virtqueue(dev, VIRTQUEUE_NUM, handle_virtblk_output);
/* Allocate the room for our own bookkeeping */
@@ -1448,7 +1479,8 @@
/* The I/O thread writes to this end of the pipe when done. */
vblk->done_fd = p[1];
- /* This is how we tell the I/O thread about more work. */
+ /* This is the second pipe, which is how we tell the I/O thread about
+ * more work. */
pipe(vblk->workpipe);
/* Create stack for thread and run it */
@@ -1487,24 +1519,25 @@
char reason[1024] = { 0 };
read(lguest_fd, reason, sizeof(reason)-1);
errx(1, "%s", reason);
- /* EAGAIN means the waker wanted us to look at some input.
+ /* EAGAIN means the Waker wanted us to look at some input.
* Anything else means a bug or incompatible change. */
} else if (errno != EAGAIN)
err(1, "Running guest failed");
- /* Service input, then unset the BREAK which releases
- * the Waker. */
+ /* Service input, then unset the BREAK to release the Waker. */
handle_input(lguest_fd);
if (write(lguest_fd, args, sizeof(args)) < 0)
err(1, "Resetting break");
}
}
/*
- * This is the end of the Launcher.
+ * This is the end of the Launcher. The good news: we are over halfway
+ * through! The bad news: the most fiendish part of the code still lies ahead
+ * of us.
*
- * But wait! We've seen I/O from the Launcher, and we've seen I/O from the
- * Drivers. If we were to see the Host kernel I/O code, our understanding
- * would be complete... :*/
+ * Are you ready? Take a deep breath and join me in the core of the Host, in
+ * "make Host".
+ :*/
static struct option opts[] = {
{ "verbose", 0, NULL, 'v' },
@@ -1527,7 +1560,7 @@
/* Memory, top-level pagetable, code startpoint and size of the
* (optional) initrd. */
unsigned long mem = 0, pgdir, start, initrd_size = 0;
- /* A temporary and the /dev/lguest file descriptor. */
+ /* Two temporaries and the /dev/lguest file descriptor. */
int i, c, lguest_fd;
/* The boot information for the Guest. */
struct boot_params *boot;
@@ -1622,6 +1655,7 @@
/* The boot header contains a command line pointer: we put the command
* line after the boot header. */
boot->hdr.cmd_line_ptr = to_guest_phys(boot + 1);
+ /* We use a simple helper to copy the arguments separated by spaces. */
concat((char *)(boot + 1), argv+optind+2);
/* Boot protocol version: 2.07 supports the fields for lguest. */
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 153d84d..f5a5e6d 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -80,8 +80,6 @@
- Behaviour of cards under Multicast
ncsa-telnet
- notes on how NCSA telnet (DOS) breaks with MTU discovery enabled.
-net-modules.txt
- - info and "insmod" parameters for all network driver modules.
netdevices.txt
- info on network device driver functions exported to the kernel.
olympic.txt
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 747a5d1..6f7872b 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -184,14 +184,14 @@
F-RTO is an enhanced recovery algorithm for TCP retransmission
timeouts. It is particularly beneficial in wireless environments
where packet loss is typically due to random radio interference
- rather than intermediate router congestion. FRTO is sender-side
+ rather than intermediate router congestion. F-RTO is sender-side
only modification. Therefore it does not require any support from
the peer, but in a typical case, however, where wireless link is
the local access link and most of the data flows downlink, the
- faraway servers should have FRTO enabled to take advantage of it.
+ faraway servers should have F-RTO enabled to take advantage of it.
If set to 1, basic version is enabled. 2 enables SACK enhanced
F-RTO if flow uses SACK. The basic version can be used also when
- SACK is in use though scenario(s) with it exists where FRTO
+ SACK is in use though scenario(s) with it exists where F-RTO
interacts badly with the packet counting of the SACK enabled TCP
flow.
diff --git a/Documentation/networking/net-modules.txt b/Documentation/networking/net-modules.txt
deleted file mode 100644
index 98c4392..0000000
--- a/Documentation/networking/net-modules.txt
+++ /dev/null
@@ -1,315 +0,0 @@
-Wed 2-Aug-95 <matti.aarnio@utu.fi>
-
- Linux network driver modules
-
- Do not mistake this for "README.modules" at the top-level
- directory! That document tells about modules in general, while
- this one tells only about network device driver modules.
-
- This is a potpourri of INSMOD-time(*) configuration options
- (if such exists) and their default values of various modules
- in the Linux network drivers collection.
-
- Some modules have also hidden (= non-documented) tunable values.
- The choice of not documenting them is based on general belief, that
- the less the user needs to know, the better. (There are things that
- driver developers can use, others should not confuse themselves.)
-
- In many cases it is highly preferred that insmod:ing is done
- ONLY with defining an explicit address for the card, AND BY
- NOT USING AUTO-PROBING!
-
- Now most cards have some explicitly defined base address that they
- are compiled with (to avoid auto-probing, among other things).
- If that compiled value does not match your actual configuration,
- do use the "io=0xXXX" -parameter for the insmod, and give there
- a value matching your environment.
-
- If you are adventurous, you can ask the driver to autoprobe
- by using the "io=0" parameter, however it is a potentially dangerous
- thing to do in a live system. (If you don't know where the
- card is located, you can try autoprobing, and after possible
- crash recovery, insmod with proper IO-address..)
-
- --------------------------
- (*) "INSMOD-time" means when you load module with
- /sbin/insmod you can feed it optional parameters.
- See "man insmod".
- --------------------------
-
-
- 8390 based Network Modules (Paul Gortmaker, Nov 12, 1995)
- --------------------------
-
-(Includes: smc-ultra, ne, wd, 3c503, hp, hp-plus, e2100 and ac3200)
-
-The 8390 series of network drivers now support multiple card systems without
-reloading the same module multiple times (memory efficient!) This is done by
-specifying multiple comma separated values, such as:
-
- insmod 3c503.o io=0x280,0x300,0x330,0x350 xcvr=0,1,0,1
-
-The above would have the one module controlling four 3c503 cards, with card 2
-and 4 using external transceivers. The "insmod" manual describes the usage
-of comma separated value lists.
-
-It is *STRONGLY RECOMMENDED* that you supply "io=" instead of autoprobing.
-If an "io=" argument is not supplied, then the ISA drivers will complain
-about autoprobing being not recommended, and begrudgingly autoprobe for
-a *SINGLE CARD ONLY* -- if you want to use multiple cards you *have* to
-supply an "io=0xNNN,0xQQQ,..." argument.
-
-The ne module is an exception to the above. A NE2000 is essentially an
-8390 chip, some bus glue and some RAM. Because of this, the ne probe is
-more invasive than the rest, and so at boot we make sure the ne probe is
-done last of all the 8390 cards (so that it won't trip over other 8390 based
-cards) With modules we can't ensure that all other non-ne 8390 cards have
-already been found. Because of this, the ne module REQUIRES an "io=0xNNN"
-argument passed in via insmod. It will refuse to autoprobe.
-
-It is also worth noting that auto-IRQ probably isn't as reliable during
-the flurry of interrupt activity on a running machine. Cards such as the
-ne2000 that can't get the IRQ setting from an EEPROM or configuration
-register are probably best supplied with an "irq=M" argument as well.
-
-
-----------------------------------------------------------------------
-Card/Module List - Configurable Parameters and Default Values
-----------------------------------------------------------------------
-
-3c501.c:
- io = 0x280 IO base address
- irq = 5 IRQ
- (Probes ports: 0x280, 0x300)
-
-3c503.c:
- io = 0 (It will complain if you don't supply an "io=0xNNN")
- irq = 0 (IRQ software selected by driver using autoIRQ)
- xcvr = 0 (Use xcvr=1 to select external transceiver.)
- (Probes ports: 0x300, 0x310, 0x330, 0x350, 0x250, 0x280, 0x2A0, 0x2E0)
-
-3c505.c:
- io = 0
- irq = 0
- dma = 6 (not autoprobed)
- (Probes ports: 0x300, 0x280, 0x310)
-
-3c507.c:
- io = 0x300
- irq = 0
- (Probes ports: 0x300, 0x320, 0x340, 0x280)
-
-3c509.c:
- io = 0
- irq = 0
- ( Module load-time probing Works reliably only on EISA, ISA ID-PROBE
- IS NOT RELIABLE! Compile this driver statically into kernel for
- now, if you need it auto-probing on an ISA-bus machine. )
-
-8390.c:
- (No public options, several other modules need this one)
-
-a2065.c:
- Since this is a Zorro board, it supports full autoprobing, even for
- multiple boards. (m68k/Amiga)
-
-ac3200.c:
- io = 0 (Checks 0x1000 to 0x8fff in 0x1000 intervals)
- irq = 0 (Read from config register)
- (EISA probing..)
-
-apricot.c:
- io = 0x300 (Can't be altered!)
- irq = 10
-
-arcnet.c:
- io = 0
- irqnum = 0
- shmem = 0
- num = 0
- DO SET THESE MANUALLY AT INSMOD!
- (When probing, looks at the following possible addresses:
- Suggested ones:
- 0x300, 0x2E0, 0x2F0, 0x2D0
- Other ones:
- 0x200, 0x210, 0x220, 0x230, 0x240, 0x250, 0x260, 0x270,
- 0x280, 0x290, 0x2A0, 0x2B0, 0x2C0,
- 0x310, 0x320, 0x330, 0x340, 0x350, 0x360, 0x370,
- 0x380, 0x390, 0x3A0, 0x3E0, 0x3F0 )
-
-ariadne.c:
- Since this is a Zorro board, it supports full autoprobing, even for
- multiple boards. (m68k/Amiga)
-
-at1700.c:
- io = 0x260
- irq = 0
- (Probes ports: 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300)
-
-atarilance.c:
- Supports full autoprobing. (m68k/Atari)
-
-atp.c: *Not modularized*
- (Probes ports: 0x378, 0x278, 0x3BC;
- fixed IRQs: 5 and 7 )
-
-cops.c:
- io = 0x240
- irq = 5
- nodeid = 0 (AutoSelect = 0, NodeID 1-254 is hand selected.)
- (Probes ports: 0x240, 0x340, 0x200, 0x210, 0x220, 0x230, 0x260,
- 0x2A0, 0x300, 0x310, 0x320, 0x330, 0x350, 0x360)
-
-de4x5.c:
- io = 0x000b
- irq = 10
- is_not_dec = 0 -- For non-DEC card using DEC 21040/21041/21140 chip, set this to 1
- (EISA, and PCI probing)
-
-de600.c:
- de600_debug = 0
- (On port 0x378, irq 7 -- lpt1; compile time configurable)
-
-de620.c:
- bnc = 0, utp = 0 <-- Force media by setting either.
- io = 0x378 (also compile-time configurable)
- irq = 7
-
-depca.c:
- io = 0x200
- irq = 7
- (Probes ports: ISA: 0x300, 0x200;
- EISA: 0x0c00 )
-
-dummy.c:
- No options
-
-e2100.c:
- io = 0 (It will complain if you don't supply an "io=0xNNN")
- irq = 0 (IRQ software selected by driver)
- mem = 0 (Override default shared memory start of 0xd0000)
- xcvr = 0 (Use xcvr=1 to select external transceiver.)
- (Probes ports: 0x300, 0x280, 0x380, 0x220)
-
-eepro.c:
- io = 0x200
- irq = 0
- (Probes ports: 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0x360)
-
-eexpress.c:
- io = 0x300
- irq = 0 (IRQ value read from EEPROM)
- (Probes ports: 0x300, 0x270, 0x320, 0x340)
-
-eql.c:
- (No parameters)
-
-ewrk3.c:
- io = 0x300
- irq = 5
- (With module no autoprobing!
- On EISA-bus does EISA probing.
- Static linkage probes ports on ISA bus:
- 0x100, 0x120, 0x140, 0x160, 0x180, 0x1A0, 0x1C0,
- 0x200, 0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x2E0,
- 0x300, 0x340, 0x360, 0x380, 0x3A0, 0x3C0)
-
-hp-plus.c:
- io = 0 (It will complain if you don't supply an "io=0xNNN")
- irq = 0 (IRQ read from configuration register)
- (Probes ports: 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340)
-
-hp.c:
- io = 0 (It will complain if you don't supply an "io=0xNNN")
- irq = 0 (IRQ software selected by driver using autoIRQ)
- (Probes ports: 0x300, 0x320, 0x340, 0x280, 0x2C0, 0x200, 0x240)
-
-hp100.c:
- hp100_port = 0 (IO-base address)
- (Does EISA-probing, if on EISA-slot;
- On ISA-bus probes all ports from 0x100 thru to 0x3E0
- in increments of 0x020)
-
-hydra.c:
- Since this is a Zorro board, it supports full autoprobing, even for
- multiple boards. (m68k/Amiga)
-
-ibmtr.c:
- io = 0xa20, 0xa24 (autoprobed by default)
- irq = 0 (driver cannot select irq - read from hardware)
- mem = 0 (shared memory base set at 0xd0000 and not yet
- able to override thru mem= parameter.)
-
-lance.c: *Not modularized*
- (PCI, and ISA probing; "CONFIG_PCI" needed for PCI support)
- (Probes ISA ports: 0x300, 0x320, 0x340, 0x360)
-
-loopback.c: *Static kernel component*
-
-ne.c:
- io = 0 (Explicitly *requires* an "io=0xNNN" value)
- irq = 0 (Tries to determine configured IRQ via autoIRQ)
- (Probes ports: 0x300, 0x280, 0x320, 0x340, 0x360)
-
-net_init.c: *Static kernel component*
-
-ni52.c: *Not modularized*
- (Probes ports: 0x300, 0x280, 0x360, 0x320, 0x340
- mems: 0xD0000, 0xD2000, 0xC8000, 0xCA000,
- 0xD4000, 0xD6000, 0xD8000 )
-
-ni65.c: *Not modularized* **16MB MEMORY BARRIER BUG**
- (Probes ports: 0x300, 0x320, 0x340, 0x360)
-
-pi2.c: *Not modularized* (well, NON-STANDARD modularization!)
- Only one card supported at this time.
- (Probes ports: 0x380, 0x300, 0x320, 0x340, 0x360, 0x3A0)
-
-plip.c:
- io = 0
- irq = 0 (by default, uses IRQ 5 for port at 0x3bc, IRQ 7
- for port at 0x378, and IRQ 2 for port at 0x278)
- (Probes ports: 0x278, 0x378, 0x3bc)
-
-ppp.c:
- No options (ppp-2.2+ has some, this is based on non-dynamic
- version from ppp-2.1.2d)
-
-seeq8005.c: *Not modularized*
- (Probes ports: 0x300, 0x320, 0x340, 0x360)
-
-skeleton.c: *Skeleton*
-
-slhc.c:
- No configuration parameters
-
-slip.c:
- slip_maxdev = 256 (default value from SL_NRUNIT on slip.h)
-
-
-smc-ultra.c:
- io = 0 (It will complain if you don't supply an "io=0xNNN")
- irq = 0 (IRQ val. read from EEPROM)
- (Probes ports: 0x200, 0x220, 0x240, 0x280, 0x300, 0x340, 0x380)
-
-tulip.c: *Partial modularization*
- (init-time memory allocation makes problems..)
-
-tunnel.c:
- No insmod parameters
-
-wavelan.c:
- io = 0x390 (Settable, but change not recommended)
- irq = 0 (Not honoured, if changed..)
-
-wd.c:
- io = 0 (It will complain if you don't supply an "io=0xNNN")
- irq = 0 (IRQ val. read from EEPROM, ancient cards use autoIRQ)
- mem = 0 (Force shared-memory on address 0xC8000, or whatever..)
- mem_end = 0 (Force non-std. mem. size via supplying mem_end val.)
- (eg. for 32k WD8003EBT, use mem=0xd0000 mem_end=0xd8000)
- (Probes ports: 0x300, 0x280, 0x380, 0x240)
-
-znet.c: *Not modularized*
- (Only one device on Zenith Z-Note (notebook?) systems,
- configuration information from (EE)PROM)
diff --git a/Documentation/networking/tc-actions-env-rules.txt b/Documentation/networking/tc-actions-env-rules.txt
new file mode 100644
index 0000000..01e716d
--- /dev/null
+++ b/Documentation/networking/tc-actions-env-rules.txt
@@ -0,0 +1,29 @@
+
+The "enviromental" rules for authors of any new tc actions are:
+
+1) If you stealeth or borroweth any packet thou shalt be branching
+from the righteous path and thou shalt cloneth.
+
+For example if your action queues a packet to be processed later
+or intentionaly branches by redirecting a packet then you need to
+clone the packet.
+There are certain fields in the skb tc_verd that need to be reset so we
+avoid loops etc. A few are generic enough so much so that skb_act_clone()
+resets them for you. So invoke skb_act_clone() rather than skb_clone()
+
+2) If you munge any packet thou shalt call pskb_expand_head in the case
+someone else is referencing the skb. After that you "own" the skb.
+You must also tell us if it is ok to munge the packet (TC_OK2MUNGE),
+this way any action downstream can stomp on the packet.
+
+3) dropping packets you dont own is a nono. You simply return
+TC_ACT_SHOT to the caller and they will drop it.
+
+The "enviromental" rules for callers of actions (qdiscs etc) are:
+
+*) thou art responsible for freeing anything returned as being
+TC_ACT_SHOT/STOLEN/QUEUED. If none of TC_ACT_SHOT/STOLEN/QUEUED is
+returned then all is great and you dont need to do anything.
+
+Post on netdev if something is unclear.
+
diff --git a/Documentation/scsi/link_power_management_policy.txt b/Documentation/scsi/link_power_management_policy.txt
new file mode 100644
index 0000000..d18993d
--- /dev/null
+++ b/Documentation/scsi/link_power_management_policy.txt
@@ -0,0 +1,19 @@
+This parameter allows the user to set the link (interface) power management.
+There are 3 possible options:
+
+Value Effect
+----------------------------------------------------------------------------
+min_power Tell the controller to try to make the link use the
+ least possible power when possible. This may
+ sacrifice some performance due to increased latency
+ when coming out of lower power states.
+
+max_performance Generally, this means no power management. Tell
+ the controller to have performance be a priority
+ over power management.
+
+medium_power Tell the controller to enter a lower power state
+ when possible, but do not enter the lowest power
+ state, thus improving latency over min_power setting.
+
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 76b8571..6c0e44b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -216,7 +216,7 @@
M: len.brown@intel.com
M: lenb@kernel.org
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
S: Supported
@@ -235,8 +235,8 @@
S: Supported
ACPI FAN DRIVER
-P: Konstantin A. Karasyov
-M: konstantin.a.karasyov@intel.com
+P: Len Brown
+M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
S: Supported
@@ -248,15 +248,15 @@
S: Supported
ACPI THERMAL DRIVER
-P: Konstantin A. Karasyov
-M: konstantin.a.karasyov@intel.com
+P: Len Brown
+M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
S: Supported
ACPI VIDEO DRIVER
-P: Luming Yu
-M: luming.yu@intel.com
+P: Rui Zhang
+M: rui.zhang@intel.com
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
S: Supported
@@ -398,6 +398,12 @@
M: acme@ghostprotocols.net
S: Maintained
+APPLETOUCH TOUCHPAD DRIVER
+P: Johannes Berg
+M: johannes@sipsolutions.net
+L: linux-input@vger.kernel.org
+S: Maintained
+
ARC FRAMEBUFFER DRIVER
P: Jaya Kumar
M: jayalk@intworks.biz
@@ -1701,7 +1707,7 @@
HID CORE LAYER
P: Jiri Kosina
M: jkosina@suse.cz
-L: linux-input@atrey.karlin.mff.cuni.cz
+L: linux-input@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
@@ -1927,8 +1933,7 @@
P: Dmitry Torokhov
M: dmitry.torokhov@gmail.com
M: dtor@mail.ru
-L: linux-input@atrey.karlin.mff.cuni.cz
-L: linux-joystick@atrey.karlin.mff.cuni.cz
+L: linux-input@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/dtor/input.git
S: Maintained
@@ -2129,8 +2134,8 @@
JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
P: David Woodhouse
M: dwmw2@infradead.org
-L: jffs-dev@axis.com
-W: http://sources.redhat.com/jffs2/
+L: linux-mtd@lists.infradead.org
+W: http://www.linux-mtd.infradead.org/doc/jffs2.html
S: Maintained
JFS FILESYSTEM
@@ -2259,6 +2264,13 @@
W: http://legousb.sourceforge.net/
S: Maintained
+LGUEST
+P: Rusty Russell
+M: rusty@rustcorp.com.au
+L: lguest@ozlabs.org
+W: http://lguest.ozlabs.org/
+S: Maintained
+
LINUX FOR IBM pSERIES (RS/6000)
P: Paul Mackerras
M: paulus@au.ibm.com
@@ -2442,13 +2454,15 @@
S: Maintained
MAC80211
-P: Jiri Benc
-M: jbenc@suse.cz
P: Michael Wu
M: flamingice@sourmilk.net
+P: Johannes Berg
+M: johannes@sipsolutions.net
+P: Jiri Benc
+M: jbenc@suse.cz
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/jbenc/mac80211.git
+T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
S: Maintained
MACVLAN DRIVER
@@ -3463,12 +3477,14 @@
S: Supported
SUSPEND TO RAM:
+P: Len Brown
+M: len.brown@intel.com
P: Pavel Machek
M: pavel@suse.cz
P: Rafael J. Wysocki
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
-S: Maintained
+S: Supported
SONIC NETWORK DRIVER
P: Thomas Bogendoerfer
@@ -4141,6 +4157,12 @@
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Maintained
+VLAN (802.1Q)
+P: Patrick McHardy
+M: kaber@trash.net
+L: netdev@vger.kernel.org
+S: Maintained
+
VT1211 HARDWARE MONITOR DRIVER
P: Juerg Haefliger
M: juergh@gmail.com
diff --git a/Makefile b/Makefile
index 2a47290..188c3b6 100644
--- a/Makefile
+++ b/Makefile
@@ -168,7 +168,8 @@
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
- -e s/ppc.*/powerpc/ -e s/mips.*/mips/ )
+ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+ -e s/sh[234].*/sh/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
@@ -196,6 +197,9 @@
UTS_MACHINE := $(ARCH)
SRCARCH := $(ARCH)
+# for i386 and x86_64 we use SRCARCH equal to x86
+SRCARCH := $(if $(filter x86_64 i386,$(SRCARCH)),x86,$(SRCARCH))
+
KCONFIG_CONFIG ?= .config
# SHELL used by kbuild
@@ -418,7 +422,7 @@
# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
# KBUILD_DEFCONFIG may point out an alternative default configuration
# used for 'make defconfig'
-include $(srctree)/arch/$(ARCH)/Makefile
+include $(srctree)/arch/$(SRCARCH)/Makefile
export KBUILD_DEFCONFIG
config %config: scripts_basic outputmakefile FORCE
@@ -497,7 +501,7 @@
KBUILD_CFLAGS += -O2
endif
-include $(srctree)/arch/$(ARCH)/Makefile
+include $(srctree)/arch/$(SRCARCH)/Makefile
ifdef CONFIG_FRAME_POINTER
KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
diff --git a/arch/arm/configs/zylonite_defconfig b/arch/arm/configs/zylonite_defconfig
new file mode 100644
index 0000000..7949d04
--- /dev/null
+++ b/arch/arm/configs/zylonite_defconfig
@@ -0,0 +1,736 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23
+# Tue Oct 23 13:33:20 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+CONFIG_CPU_PXA320=y
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+CONFIG_MACH_ZYLONITE=y
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_PXA3xx=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig
index 86f53f8..08d2707 100644
--- a/arch/arm/mach-ixp2000/Kconfig
+++ b/arch/arm/mach-ixp2000/Kconfig
@@ -14,7 +14,7 @@
help
Say 'Y' here if you want your kernel to support the Radisys
ENP2611 PCI network processing card. For more information on
- this card, see <file:Documentation/arm/ENP2611>.
+ this card, see <file:Documentation/arm/IXP2000>.
config ARCH_IXDP2400
bool "Support Intel IXDP2400"
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index 172a058..bd5184f 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -190,15 +190,15 @@
goto exit;
if (!request_mem_region
- (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, dev->kobj.name))
+ (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(dev->kobj)))
goto exit_free;
if (!request_mem_region
- (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, dev->kobj.name))
+ (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(dev->kobj)))
goto exit_release_1;
if (!request_mem_region
- (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, dev->kobj.name))
+ (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(dev->kobj)))
goto exit_release_2;
x->xpec_base = (void * __iomem)io_p2v(NETX_PA_XPEC(xcno));
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index b092162..1306812 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -343,6 +343,7 @@
&h2_mcbsp1_device,
};
+#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata h2_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
@@ -356,6 +357,7 @@
* - ... etc
*/
};
+#endif
static void __init h2_init_smc91x(void)
{
@@ -467,8 +469,10 @@
if (gpio_request(58, "tps65010") == 0)
gpio_direction_input(58);
+#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(1, h2_i2c_board_info,
ARRAY_SIZE(h2_i2c_board_info));
+#endif
}
static void __init h2_map_io(void)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index d9af436..e6e85b7 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -651,7 +651,7 @@
break;
case CM_SYSCLKOUT_SEL1:
div_addr = (u32)&PRCM_CLKOUT_CTRL;
- if ((div_off == 3) || (div_off = 11))
+ if ((div_off == 3) || (div_off == 11))
mask= 0x3;
break;
case CM_CORE_SEL1:
diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c
index 5cd3cad..436f965 100644
--- a/arch/arm/mach-pxa/mfp.c
+++ b/arch/arm/mach-pxa/mfp.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2007 Marvell Internation Ltd.
*
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 7a34231..0a0d387 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2007 Marvell Internation Ltd.
*
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index cd9eba5..1010f77 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2007 Marvell Internation Ltd.
*
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 39f0de8..5da7982 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2006 Marvell International Ltd.
*
- * 2007-09-02: eric miao <eric.y.miao@gmail.com>
+ * 2007-09-02: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index ec4286c..a2d45d7 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -151,6 +151,9 @@
OIER &= ~OIER_E0;
raw_local_irq_restore(irqflags);
break;
+
+ case CLOCK_EVT_MODE_RESUME:
+ break;
}
}
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 3f18d76..743a87b 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2006 Marvell International Ltd.
*
- * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ * 2007-09-04: eric miao <eric.miao@marvell.com>
* rewrite to align with latest kernel
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index b5fbd2f..1832bc3 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -5,7 +5,7 @@
* PXA3xx Development Platform (aka Zylonite)
*
* Copyright (C) 2007 Marvell Internation Ltd.
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 63cb36b..94c7158 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -5,7 +5,7 @@
* PXA3xx Development Platform (aka Zylonite)
*
* Copyright (C) 2007 Marvell Internation Ltd.
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 5b80b6b..194ef48 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -105,9 +105,13 @@
mrc p15, 0, r1, c1, c0, 0 @ Read control register
mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
bic r2, r1, #1 << 12
+ mrs r3, cpsr @ Disable FIQs while Icache
+ orr ip, r3, #PSR_F_BIT @ is disabled
+ msr cpsr_c, ip
mcr p15, 0, r2, c1, c0, 0 @ Disable I cache
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable
+ msr cpsr_c, r3 @ Restore FIQ state
mov pc, lr
/*
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 7888551..9f9de3e 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -295,6 +295,12 @@
help
PNAV 1.0 board Support.
+config H8606_HVSISTEMAS
+ bool "HV Sistemas H8606"
+ depends on (BF532)
+ help
+ HV Sistemas H8606 board support.
+
config GENERIC_BOARD
bool "Custom"
depends on (BF537 || BF536 \
@@ -317,7 +323,8 @@
config MEM_MT48LC16M16A2TG_75
bool
depends on (BFIN533_EZKIT || BFIN561_EZKIT \
- || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM)
+ || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
+ || H8606_HVSISTEMAS)
default y
config MEM_MT48LC32M8A2_75
@@ -366,7 +373,7 @@
int "Crystal Frequency in Hz"
default "11059200" if BFIN533_STAMP
default "27000000" if BFIN533_EZKIT
- default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT)
+ default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS)
default "30000000" if BFIN561_EZKIT
default "24576000" if PNAV10
help
@@ -404,6 +411,7 @@
default "20" if BFIN537_BLUETECHNIX_CM
default "20" if BFIN561_BLUETECHNIX_CM
default "20" if BFIN561_EZKIT
+ default "16" if H8606_HVSISTEMAS
help
This controls the frequency of the on-chip PLL. This can be between 1 and 64.
PLL Frequency = (Crystal Frequency) * (this setting)
@@ -440,6 +448,7 @@
default 4 if BFIN537_BLUETECHNIX_CM
default 4 if BFIN561_BLUETECHNIX_CM
default 5 if BFIN561_EZKIT
+ default 3 if H8606_HVSISTEMAS
help
This sets the frequency of the system clock (including SDRAM or DDR).
This can be between 1 and 15
@@ -492,11 +501,13 @@
default 64 if BFIN561_EZKIT
default 128 if BFIN533_STAMP
default 64 if PNAV10
+ default 32 if H8606_HVSISTEMAS
config MEM_ADD_WIDTH
int "SDRAM Memory Address Width"
default 9 if BFIN533_EZKIT
default 9 if BFIN561_EZKIT
+ default 9 if H8606_HVSISTEMAS
default 10 if BFIN527_EZKIT
default 10 if BFIN537_STAMP
default 11 if BFIN533_STAMP
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index df974e7..1f6a93d 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -244,7 +244,7 @@
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 57f58d5..9e9b420 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -198,7 +198,7 @@
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=750000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 306302b..f59ade9 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -199,7 +199,7 @@
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=750000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 828b604..07eb63d 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -206,7 +206,7 @@
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index d856988..0dd3d22 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,6 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.6
+# Linux kernel version: 2.6.22.10
+# Sat Oct 27 02:34:07 2007
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -64,7 +65,6 @@
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
@@ -117,6 +117,9 @@
#
# Processor and Board Settings
#
+# CONFIG_BF522 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF527 is not set
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
# CONFIG_BF533 is not set
@@ -129,6 +132,7 @@
CONFIG_BF549=y
# CONFIG_BF561 is not set
CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_1 is not set
# CONFIG_BF_REV_0_2 is not set
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
@@ -137,6 +141,7 @@
# CONFIG_BF_REV_NONE is not set
CONFIG_BF54x=y
CONFIG_BFIN_SINGLE_CORE=y
+# CONFIG_BFIN527_EZKIT is not set
# CONFIG_BFIN533_EZKIT is not set
# CONFIG_BFIN533_STAMP is not set
# CONFIG_BFIN537_STAMP is not set
@@ -147,8 +152,23 @@
# CONFIG_BFIN561_EZKIT is not set
# CONFIG_BFIN561_TEPLA is not set
# CONFIG_PNAV10 is not set
+# CONFIG_H8606_HVSISTEMAS is not set
# CONFIG_GENERIC_BOARD is not set
CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_CNT=8
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
CONFIG_IRQ_TIMER0=11
CONFIG_IRQ_TIMER1=11
CONFIG_IRQ_TIMER2=11
@@ -160,15 +180,6 @@
CONFIG_IRQ_TIMER8=11
CONFIG_IRQ_TIMER9=11
CONFIG_IRQ_TIMER10=11
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
#
# BF548 Specific Configuration
@@ -236,16 +247,11 @@
CONFIG_IRQ_PIXC_IN1=8
CONFIG_IRQ_PIXC_OUT=8
CONFIG_IRQ_SDH=8
-CONFIG_IRQ_CNT=8
CONFIG_IRQ_KEY=8
CONFIG_IRQ_CAN1_RX=11
CONFIG_IRQ_CAN1_TX=11
CONFIG_IRQ_SDH_MASK0=11
CONFIG_IRQ_SDH_MASK1=11
-CONFIG_IRQ_USB_INT0=11
-CONFIG_IRQ_USB_INT1=11
-CONFIG_IRQ_USB_INT2=11
-CONFIG_IRQ_USB_DMA=11
CONFIG_IRQ_OTPSEC=11
CONFIG_IRQ_PINT2=11
CONFIG_IRQ_PINT3=11
@@ -273,9 +279,9 @@
#
CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=533000000
+CONFIG_MAX_VCO_HZ=533333333
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
@@ -332,9 +338,10 @@
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
+CONFIG_DMA_UNCACHED_2M=y
+# CONFIG_DMA_UNCACHED_1M is not set
# CONFIG_DMA_UNCACHED_NONE is not set
#
@@ -353,7 +360,7 @@
#
#
-# EBIU_AMBCTL Global Control
+# EBIU_AMGCTL Global Control
#
CONFIG_C_AMCKEN=y
# CONFIG_C_AMBEN is not set
@@ -722,7 +729,7 @@
#
# Input device support
#
-CONFIG_INPUT=y
+CONFIG_INPUT=m
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
@@ -731,18 +738,39 @@
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_TSDEV=m
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_BFIN=m
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+CONFIG_TOUCHSCREEN_AD7877=m
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -764,9 +792,9 @@
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BFIN_PFLAGS is not set
+# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
@@ -958,17 +986,92 @@
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
+CONFIG_FB=m
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_BFIN_7171 is not set
+# CONFIG_FB_BFIN_7393 is not set
+CONFIG_FB_BF54X_LQ043=m
+# CONFIG_FB_BFIN_T350MCQB is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_LOGO is not set
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BLACKFIN_AD1836 is not set
+# CONFIG_SND_BFIN_AD73311 is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=y
+CONFIG_SND_BF5XX_SOC=y
+CONFIG_SND_BF5XX_SOC_AC97=y
+CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
+CONFIG_SND_BF5XX_SPORT_NUM=0
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_SOC_AD1980=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
#
# HID Devices
#
-CONFIG_HID=y
+CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
#
@@ -1101,8 +1204,13 @@
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -1123,15 +1231,22 @@
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
#
# Pseudo filesystems
@@ -1183,10 +1298,33 @@
#
# Network File Systems
#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=y
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@@ -1195,13 +1333,68 @@
#
# Partition Types
#
-# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
#
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 85e647f..277d72d 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -243,7 +243,7 @@
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 15e36aa..3d403e0 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -204,7 +204,7 @@
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index a16cb03..d6b61d5 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -35,6 +35,7 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/scatterlist.h>
#include <asm/cacheflush.h>
#include <asm/bfin-global.h>
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index 65c5ba4..65f4e67 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -54,9 +54,11 @@
[sp + PT_IPEND] = r0;
/* do a 'fake' RTI by jumping to [RETI]
* to avoid clearing supervisor mode in child
- */
+ */
+ r0 = [sp + PT_PC];
+ [sp + PT_P0] = r0;
+
RESTORE_ALL_SYS
- p0 = reti;
jump (p0);
ENDPROC(_ret_from_fork)
diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S
index d8b1ebc..9026269 100644
--- a/arch/blackfin/kernel/fixed_code.S
+++ b/arch/blackfin/kernel/fixed_code.S
@@ -129,4 +129,18 @@
rts;
ENDPROC (_atomic_ior32)
+.align 16
+ /*
+ * safe_user_instruction
+ * Four NOPS are enough to allow the pipeline to speculativily load
+ * execute anything it wants. After that, things have gone bad, and
+ * we are stuck - so panic. Since we might be in user space, we can't
+ * call panic, so just cause a unhandled exception, this should cause
+ * a dump of the trace buffer so we can tell were we are, and a reboot
+ */
+ENTRY(_safe_user_instruction)
+ NOP; NOP; NOP; NOP;
+ EXCPT 0x4;
+ENDPROC(_safe_user_instruction)
+
ENTRY(_fixed_code_end)
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index cb7ba9b..5cf4bdb 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -20,8 +20,7 @@
#else
# define tassert(expr) \
if (!(expr)) \
- printk(KERN_DEBUG "%s:%s:%i: Assertion failed: " #expr "\n", \
- __FILE__, __func__, __LINE__);
+ printk(KERN_DEBUG "%s:%s:%i: Assertion failed: " #expr "\n", __FILE__, __func__, __LINE__);
#endif
#define BFIN_TIMER_NUM_GROUP (BFIN_TIMER_OCTET(MAX_BLACKFIN_GPTIMERS - 1) + 1)
@@ -70,7 +69,7 @@
#endif
};
-static uint32_t const dis_mask[MAX_BLACKFIN_GPTIMERS] =
+static uint32_t const trun_mask[MAX_BLACKFIN_GPTIMERS] =
{
TIMER_STATUS_TRUN0,
TIMER_STATUS_TRUN1,
@@ -90,7 +89,27 @@
#endif
};
-static uint32_t const irq_mask[MAX_BLACKFIN_GPTIMERS] =
+static uint32_t const tovf_mask[MAX_BLACKFIN_GPTIMERS] =
+{
+ TIMER_STATUS_TOVF0,
+ TIMER_STATUS_TOVF1,
+ TIMER_STATUS_TOVF2,
+#if (MAX_BLACKFIN_GPTIMERS > 3)
+ TIMER_STATUS_TOVF3,
+ TIMER_STATUS_TOVF4,
+ TIMER_STATUS_TOVF5,
+ TIMER_STATUS_TOVF6,
+ TIMER_STATUS_TOVF7,
+#endif
+#if (MAX_BLACKFIN_GPTIMERS > 8)
+ TIMER_STATUS_TOVF8,
+ TIMER_STATUS_TOVF9,
+ TIMER_STATUS_TOVF10,
+ TIMER_STATUS_TOVF11,
+#endif
+};
+
+static uint32_t const timil_mask[MAX_BLACKFIN_GPTIMERS] =
{
TIMER_STATUS_TIMIL0,
TIMER_STATUS_TIMIL1,
@@ -165,17 +184,31 @@
uint16_t get_gptimer_intr(int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
- return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & irq_mask[timer_id]) ? 1 : 0;
+ return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]) ? 1 : 0;
}
EXPORT_SYMBOL(get_gptimer_intr);
void clear_gptimer_intr(int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
- group_regs[BFIN_TIMER_OCTET(timer_id)]->status = irq_mask[timer_id];
+ group_regs[BFIN_TIMER_OCTET(timer_id)]->status = timil_mask[timer_id];
}
EXPORT_SYMBOL(clear_gptimer_intr);
+uint16_t get_gptimer_over(int timer_id)
+{
+ tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+ return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]) ? 1 : 0;
+}
+EXPORT_SYMBOL(get_gptimer_over);
+
+void clear_gptimer_over(int timer_id)
+{
+ tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
+ group_regs[BFIN_TIMER_OCTET(timer_id)]->status = tovf_mask[timer_id];
+}
+EXPORT_SYMBOL(clear_gptimer_over);
+
void set_gptimer_config(int timer_id, uint16_t config)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
@@ -214,7 +247,7 @@
}
for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i)
if (mask & (1 << i))
- group_regs[BFIN_TIMER_OCTET(i)]->status |= dis_mask[i];
+ group_regs[BFIN_TIMER_OCTET(i)]->status |= trun_mask[i];
SSYNC();
}
EXPORT_SYMBOL(disable_gptimers);
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index f1b059e..934234f 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -316,6 +316,15 @@
init_leds();
+ _bfin_swrst = bfin_read_SWRST();
+
+ if (_bfin_swrst & RESET_DOUBLE)
+ printk(KERN_INFO "Recovering from Double Fault event\n");
+ else if (_bfin_swrst & RESET_WDOG)
+ printk(KERN_INFO "Recovering from Watchdog event\n");
+ else if (_bfin_swrst & RESET_SOFTWARE)
+ printk(KERN_NOTICE "Reset caused by Software reset\n");
+
printk(KERN_INFO "Blackfin support (C) 2004-2007 Analog Devices, Inc.\n");
if (bfin_compiled_revid() == 0xffff)
printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
@@ -402,8 +411,6 @@
if (l1_length > L1_DATA_A_LENGTH)
panic("L1 data memory overflow\n");
- _bfin_swrst = bfin_read_SWRST();
-
/* Copy atomic sequences to their fixed location, and sanity check that
these locations are the ones that we advertise to userspace. */
memcpy((void *)FIXED_CODE_START, &fixed_code_start,
@@ -424,6 +431,8 @@
!= ATOMIC_AND32 - FIXED_CODE_START);
BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
!= ATOMIC_XOR32 - FIXED_CODE_START);
+ BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start
+ != SAFE_USER_INSTRUCTION - FIXED_CODE_START);
init_exception_vectors();
bf53x_cache_init();
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index afd044e..cfa05436 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -37,10 +37,24 @@
#include <asm/blackfin.h>
#include <asm/irq_handler.h>
#include <asm/trace.h>
+#include <asm/fixed_code.h>
#ifdef CONFIG_KGDB
# include <linux/debugger.h>
# include <linux/kgdb.h>
+
+# define CHK_DEBUGGER_TRAP() \
+ do { \
+ CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \
+ } while (0)
+# define CHK_DEBUGGER_TRAP_MAYBE() \
+ do { \
+ if (kgdb_connected) \
+ CHK_DEBUGGER_TRAP(); \
+ } while (0)
+#else
+# define CHK_DEBUGGER_TRAP() do { } while (0)
+# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0)
#endif
/* Initiate the event table handler */
@@ -53,13 +67,13 @@
int kstack_depth_to_print = 48;
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-static int printk_address(unsigned long address)
+static void decode_address(char *buf, unsigned long address)
{
struct vm_list_struct *vml;
struct task_struct *p;
struct mm_struct *mm;
- unsigned long offset;
+ unsigned long flags, offset;
+ unsigned int in_exception = bfin_read_IPEND() & 0x10;
#ifdef CONFIG_KALLSYMS
unsigned long symsize;
@@ -75,20 +89,33 @@
/* yeah! kernel space! */
if (!modname)
modname = delim = "";
- return printk("<0x%p> { %s%s%s%s + 0x%lx }",
+ sprintf(buf, "<0x%p> { %s%s%s%s + 0x%lx }",
(void *)address, delim, modname, delim, symname,
(unsigned long)offset);
+ return;
}
#endif
+ /* Problem in fixed code section? */
+ if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
+ sprintf(buf, "<0x%p> /* Maybe fixed code section */", (void *)address);
+ return;
+ }
+
+ /* Problem somewhere before the kernel start address */
+ if (address < CONFIG_BOOT_LOAD) {
+ sprintf(buf, "<0x%p> /* Maybe null pointer? */", (void *)address);
+ return;
+ }
+
/* looks like we're off in user-land, so let's walk all the
* mappings of all our processes and see if we can't be a whee
* bit more specific
*/
- write_lock_irq(&tasklist_lock);
+ write_lock_irqsave(&tasklist_lock, flags);
for_each_process(p) {
- mm = get_task_mm(p);
+ mm = (in_exception ? p->mm : get_task_mm(p));
if (!mm)
continue;
@@ -117,25 +144,30 @@
else
offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT);
- write_unlock_irq(&tasklist_lock);
- mmput(mm);
- return printk("<0x%p> [ %s + 0x%lx ]",
- (void *)address, name, offset);
+ sprintf(buf, "<0x%p> [ %s + 0x%lx ]",
+ (void *)address, name, offset);
+ if (!in_exception)
+ mmput(mm);
+ goto done;
}
vml = vml->next;
}
- mmput(mm);
+ if (!in_exception)
+ mmput(mm);
}
- write_unlock_irq(&tasklist_lock);
/* we were unable to find this address anywhere */
- return printk("[<0x%p>]", (void *)address);
+ sprintf(buf, "[<0x%p>]", (void *)address);
+
+done:
+ write_unlock_irqrestore(&tasklist_lock, flags);
}
-#endif
asmlinkage void double_fault_c(struct pt_regs *fp)
{
+ console_verbose();
+ oops_in_progress = 1;
printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
dump_bfin_regs(fp, (void *)fp->retx);
panic("Double Fault - unrecoverable event\n");
@@ -151,23 +183,30 @@
siginfo_t info;
unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
-#ifdef CONFIG_KGDB
-# define CHK_DEBUGGER_TRAP() \
- do { \
- CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \
- } while (0)
-# define CHK_DEBUGGER_TRAP_MAYBE() \
- do { \
- if (kgdb_connected) \
- CHK_DEBUGGER_TRAP(); \
- } while (0)
-#else
-# define CHK_DEBUGGER_TRAP() do { } while (0)
-# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0)
-#endif
-
trace_buffer_save(j);
+ /* Important - be very careful dereferncing pointers - will lead to
+ * double faults if the stack has become corrupt
+ */
+
+ /* If the fault was caused by a kernel thread, or interrupt handler
+ * we will kernel panic, so the system reboots.
+ * If KGDB is enabled, don't set this for kernel breakpoints
+ */
+ if ((bfin_read_IPEND() & 0xFFC0)
+#ifdef CONFIG_KGDB
+ && trapnr != VEC_EXCPT02
+#endif
+ ){
+ console_verbose();
+ oops_in_progress = 1;
+ } else if (current) {
+ if (current->mm == NULL) {
+ console_verbose();
+ oops_in_progress = 1;
+ }
+ }
+
/* trap_c() will be called for exceptions. During exceptions
* processing, the pc value should be set with retx value.
* With this change we can cleanup some code in signal.c- TODO
@@ -211,7 +250,7 @@
case VEC_EXCPT03:
info.si_code = SEGV_STACKFLOW;
sig = SIGSEGV;
- printk(KERN_EMERG EXC_0x03);
+ printk(KERN_NOTICE EXC_0x03);
CHK_DEBUGGER_TRAP();
break;
/* 0x04 - User Defined, Caught by default */
@@ -240,7 +279,7 @@
case VEC_OVFLOW:
info.si_code = TRAP_TRACEFLOW;
sig = SIGTRAP;
- printk(KERN_EMERG EXC_0x11);
+ printk(KERN_NOTICE EXC_0x11);
CHK_DEBUGGER_TRAP();
break;
/* 0x12 - Reserved, Caught by default */
@@ -262,14 +301,14 @@
case VEC_UNDEF_I:
info.si_code = ILL_ILLOPC;
sig = SIGILL;
- printk(KERN_EMERG EXC_0x21);
+ printk(KERN_NOTICE EXC_0x21);
CHK_DEBUGGER_TRAP();
break;
/* 0x22 - Illegal Instruction Combination, handled here */
case VEC_ILGAL_I:
info.si_code = ILL_ILLPARAOP;
sig = SIGILL;
- printk(KERN_EMERG EXC_0x22);
+ printk(KERN_NOTICE EXC_0x22);
CHK_DEBUGGER_TRAP();
break;
/* 0x23 - Data CPLB Protection Violation,
@@ -277,21 +316,21 @@
case VEC_CPLB_VL:
info.si_code = ILL_CPLB_VI;
sig = SIGILL;
- printk(KERN_EMERG EXC_0x23);
+ printk(KERN_NOTICE EXC_0x23);
CHK_DEBUGGER_TRAP();
break;
/* 0x24 - Data access misaligned, handled here */
case VEC_MISALI_D:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_EMERG EXC_0x24);
+ printk(KERN_NOTICE EXC_0x24);
CHK_DEBUGGER_TRAP();
break;
/* 0x25 - Unrecoverable Event, handled here */
case VEC_UNCOV:
info.si_code = ILL_ILLEXCPT;
sig = SIGILL;
- printk(KERN_EMERG EXC_0x25);
+ printk(KERN_NOTICE EXC_0x25);
CHK_DEBUGGER_TRAP();
break;
/* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
@@ -299,7 +338,7 @@
case VEC_CPLB_M:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_EMERG EXC_0x26);
+ printk(KERN_NOTICE EXC_0x26);
CHK_DEBUGGER_TRAP();
break;
/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
@@ -307,11 +346,10 @@
info.si_code = ILL_CPLB_MULHIT;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
sig = SIGSEGV;
- printk(KERN_EMERG "\n"
- KERN_EMERG "NULL pointer access (probably)\n");
+ printk(KERN_NOTICE "NULL pointer access (probably)\n");
#else
sig = SIGILL;
- printk(KERN_EMERG EXC_0x27);
+ printk(KERN_NOTICE EXC_0x27);
#endif
CHK_DEBUGGER_TRAP();
break;
@@ -331,7 +369,7 @@
case VEC_ISTRU_VL: /* ADSP-BF535 only (MH) */
info.si_code = BUS_OPFETCH;
sig = SIGBUS;
- printk(KERN_EMERG "BF535: VEC_ISTRU_VL\n");
+ printk(KERN_NOTICE "BF535: VEC_ISTRU_VL\n");
CHK_DEBUGGER_TRAP();
break;
#else
@@ -341,7 +379,7 @@
case VEC_MISALI_I:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
- printk(KERN_EMERG EXC_0x2A);
+ printk(KERN_NOTICE EXC_0x2A);
CHK_DEBUGGER_TRAP();
break;
/* 0x2B - Instruction CPLB protection Violation,
@@ -349,14 +387,14 @@
case VEC_CPLB_I_VL:
info.si_code = ILL_CPLB_VI;
sig = SIGILL;
- printk(KERN_EMERG EXC_0x2B);
+ printk(KERN_NOTICE EXC_0x2B);
CHK_DEBUGGER_TRAP();
break;
/* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
case VEC_CPLB_I_M:
info.si_code = ILL_CPLB_MISS;
sig = SIGBUS;
- printk(KERN_EMERG EXC_0x2C);
+ printk(KERN_NOTICE EXC_0x2C);
CHK_DEBUGGER_TRAP();
break;
/* 0x2D - Instruction CPLB Multiple Hits, handled here */
@@ -364,10 +402,10 @@
info.si_code = ILL_CPLB_MULHIT;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
sig = SIGSEGV;
- printk(KERN_EMERG "\n\nJump to address 0 - 0x0fff\n");
+ printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n");
#else
sig = SIGILL;
- printk(KERN_EMERG EXC_0x2D);
+ printk(KERN_NOTICE EXC_0x2D);
#endif
CHK_DEBUGGER_TRAP();
break;
@@ -375,7 +413,7 @@
case VEC_ILL_RES:
info.si_code = ILL_PRVOPC;
sig = SIGILL;
- printk(KERN_EMERG EXC_0x2E);
+ printk(KERN_NOTICE EXC_0x2E);
CHK_DEBUGGER_TRAP();
break;
/* 0x2F - Reserved, Caught by default */
@@ -404,38 +442,40 @@
break;
}
- if (sig != 0 && sig != SIGTRAP) {
+ BUG_ON(sig == 0);
+
+ if (sig != SIGTRAP) {
unsigned long stack;
dump_bfin_regs(fp, (void *)fp->retx);
- dump_bfin_trace_buffer();
+
+ /* Print out the trace buffer if it makes sense */
+#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
+ if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
+ printk(KERN_NOTICE "No trace since you do not have "
+ "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
+ KERN_NOTICE "\n");
+ else
+#endif
+ dump_bfin_trace_buffer();
show_stack(current, &stack);
- if (current->mm == NULL)
+ if (oops_in_progress) {
+#ifndef CONFIG_ACCESS_CHECK
+ printk(KERN_EMERG "Hey - dork - please turn on "
+ "CONFIG_ACCESS_CHECK\n");
+#endif
panic("Kernel exception");
+ }
+
+ /* Ensure that bad return addresses don't end up in an infinite
+ * loop, due to speculative loads/reads
+ */
+ fp->pc = SAFE_USER_INSTRUCTION;
}
info.si_signo = sig;
info.si_errno = 0;
info.si_addr = (void *)fp->pc;
force_sig_info(sig, &info, current);
- /* if the address that we are about to return to is not valid, set it
- * to a valid address, if we have a current application or panic
- */
- if (!(fp->pc <= physical_mem_end
-#if L1_CODE_LENGTH != 0
- || (fp->pc >= L1_CODE_START &&
- fp->pc <= (L1_CODE_START + L1_CODE_LENGTH))
-#endif
- )) {
- if (current->mm) {
- fp->pc = current->mm->start_code;
- } else {
- printk(KERN_EMERG
- "I can't return to memory that doesn't exist"
- " - bad things happen\n");
- panic("Help - I've fallen and can't get up\n");
- }
- }
-
trace_buffer_restore(j);
return;
}
@@ -448,21 +488,21 @@
{
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int tflags, i = 0;
+ char buf[150];
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
int j, index;
#endif
trace_buffer_save(tflags);
- printk(KERN_EMERG "Hardware Trace:\n");
+ printk(KERN_NOTICE "Hardware Trace:\n");
if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
- printk(KERN_EMERG "%4i Target : ", i);
- printk_address((unsigned long)bfin_read_TBUF());
- printk("\n" KERN_EMERG " Source : ");
- printk_address((unsigned long)bfin_read_TBUF());
- printk("\n");
+ decode_address(buf, (unsigned long)bfin_read_TBUF());
+ printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
+ decode_address(buf, (unsigned long)bfin_read_TBUF());
+ printk(KERN_NOTICE " Source : %s\n", buf);
}
}
@@ -474,17 +514,16 @@
j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
while (j) {
- printk(KERN_EMERG "%4i Target : ", i);
- printk_address(software_trace_buff[index]);
+ decode_address(buf, software_trace_buff[index]);
+ printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
index -= 1;
if (index < 0 )
index = EXPAND_LEN;
- printk("\n" KERN_EMERG " Source : ");
- printk_address(software_trace_buff[index]);
+ decode_address(buf, software_trace_buff[index]);
+ printk(KERN_NOTICE " Source : %s\n", buf);
index -= 1;
if (index < 0)
index = EXPAND_LEN;
- printk("\n");
j--;
i++;
}
@@ -499,10 +538,7 @@
{
unsigned long addr;
- printk("\nCall Trace:");
-#ifdef CONFIG_KALLSYMS
- printk("\n");
-#endif
+ printk(KERN_NOTICE "\n" KERN_NOTICE "Call Trace:\n");
while (!kstack_end(sp)) {
addr = *sp++;
@@ -518,7 +554,7 @@
print_ip_sym(addr);
}
- printk("\n");
+ printk(KERN_NOTICE "\n");
}
void show_stack(struct task_struct *task, unsigned long *stack)
@@ -540,14 +576,15 @@
addr = (unsigned long)stack;
endstack = (unsigned long *)PAGE_ALIGN(addr);
- printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack);
+ printk(KERN_NOTICE "Stack from %08lx:", (unsigned long)stack);
for (i = 0; i < kstack_depth_to_print; i++) {
if (stack + 1 > endstack)
break;
if (i % 8 == 0)
- printk("\n" KERN_EMERG " ");
+ printk("\n" KERN_NOTICE " ");
printk(" %08lx", *stack++);
}
+ printk("\n");
show_trace(task, stack);
}
@@ -568,33 +605,34 @@
void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
{
- if (current->pid) {
- printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n"
- KERN_EMERG "\n");
- printk(KERN_EMERG "COMM=%s PID=%d\n",
- current->comm, current->pid);
+ char buf [150];
+
+ if (!oops_in_progress) {
+ if (current->pid && current->mm) {
+ printk(KERN_NOTICE "\n" KERN_NOTICE "CURRENT PROCESS:\n");
+ printk(KERN_NOTICE "COMM=%s PID=%d\n",
+ current->comm, current->pid);
+
+ printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
+ KERN_NOTICE "BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
+ KERN_NOTICE "\n",
+ (void *)current->mm->start_code,
+ (void *)current->mm->end_code,
+ (void *)current->mm->start_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->brk,
+ (void *)current->mm->start_stack);
+ } else {
+ printk (KERN_NOTICE "\n" KERN_NOTICE
+ "No Valid pid - Either things are really messed up,"
+ " or you are in the kernel\n");
+ }
} else {
- printk
- (KERN_EMERG "\n" KERN_EMERG
- "No Valid pid - Either things are really messed up,"
- " or you are in the kernel\n");
+ printk(KERN_NOTICE "Kernel or interrupt exception\n");
}
- if (current->mm) {
- printk(KERN_EMERG "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
- KERN_EMERG "BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
- KERN_EMERG "\n",
- (void *)current->mm->start_code,
- (void *)current->mm->end_code,
- (void *)current->mm->start_data,
- (void *)current->mm->end_data,
- (void *)current->mm->end_data,
- (void *)current->mm->brk,
- (void *)current->mm->start_stack);
- }
-
- printk(KERN_EMERG "return address: [0x%p]; contents of:", retaddr);
- if (retaddr != 0 && retaddr <= (void *)physical_mem_end
+ if (retaddr >= (void *)FIXED_CODE_START && retaddr < (void *)physical_mem_end
#if L1_CODE_LENGTH != 0
/* FIXME: Copy the code out of L1 Instruction SRAM through dma
memcpy. */
@@ -604,18 +642,20 @@
) {
int i = ((unsigned int)retaddr & 0xFFFFFFF0) - 32;
unsigned short x = 0;
+ printk(KERN_NOTICE "return address: [0x%p]; contents of:", retaddr);
for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) {
if (!(i & 0xF))
- printk("\n" KERN_EMERG "0x%08x: ", i);
+ printk("\n" KERN_NOTICE "0x%08x: ", i);
if (get_user(x, (unsigned short *)i))
break;
#ifndef CONFIG_DEBUG_HWERR
/* If one of the last few instructions was a STI
* it is likely that the error occured awhile ago
- * and we just noticed
+ * and we just noticed. This only happens in kernel
+ * context, which should mean an oops is happening
*/
- if (x >= 0x0040 && x <= 0x0047 && i <= 0)
+ if (oops_in_progress && x >= 0x0040 && x <= 0x0047 && i <= 0)
panic("\n\nWARNING : You should reconfigure"
" the kernel to turn on\n"
" 'Hardware error interrupt"
@@ -628,56 +668,60 @@
else
printk(" %04x ", x);
}
- printk("\n" KERN_EMERG "\n");
+ printk("\n");
} else
- printk(KERN_EMERG
+ printk("\n" KERN_NOTICE
"Cannot look at the [PC] for it is"
- "in unreadable L1 SRAM - sorry\n");
+ " in unreadable memory - sorry\n");
+ printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n");
+ printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
+ (long)fp->seqstat, fp->ipend, fp->syscfg);
- printk(KERN_EMERG
- "RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n",
- fp->rete, fp->retn, fp->retx, fp->rets);
- printk(KERN_EMERG "IPEND: %04lx SYSCFG: %04lx\n",
- fp->ipend, fp->syscfg);
- printk(KERN_EMERG "SEQSTAT: %08lx SP: %08lx\n",
- (long)fp->seqstat, (long)fp);
- printk(KERN_EMERG "R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n",
- fp->r0, fp->r1, fp->r2, fp->r3);
- printk(KERN_EMERG "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n",
- fp->r4, fp->r5, fp->r6, fp->r7);
- printk(KERN_EMERG "P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n",
- fp->p0, fp->p1, fp->p2, fp->p3);
- printk(KERN_EMERG
- "P4: %08lx P5: %08lx FP: %08lx\n",
- fp->p4, fp->p5, fp->fp);
- printk(KERN_EMERG
- "A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
- fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+ decode_address(buf, fp->rete);
+ printk(KERN_NOTICE " RETE: %s\n", buf);
+ decode_address(buf, fp->retn);
+ printk(KERN_NOTICE " RETN: %s\n", buf);
+ decode_address(buf, fp->retx);
+ printk(KERN_NOTICE " RETX: %s\n", buf);
+ decode_address(buf, fp->rets);
+ printk(KERN_NOTICE " RETS: %s\n", buf);
- printk(KERN_EMERG "LB0: %08lx LT0: %08lx LC0: %08lx\n",
- fp->lb0, fp->lt0, fp->lc0);
- printk(KERN_EMERG "LB1: %08lx LT1: %08lx LC1: %08lx\n",
- fp->lb1, fp->lt1, fp->lc1);
- printk(KERN_EMERG "B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n",
- fp->b0, fp->l0, fp->m0, fp->i0);
- printk(KERN_EMERG "B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n",
- fp->b1, fp->l1, fp->m1, fp->i1);
- printk(KERN_EMERG "B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n",
- fp->b2, fp->l2, fp->m2, fp->i2);
- printk(KERN_EMERG "B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n",
- fp->b3, fp->l3, fp->m3, fp->i3);
-
- printk(KERN_EMERG "\n" KERN_EMERG "USP: %08lx ASTAT: %08lx\n",
- rdusp(), fp->astat);
if ((long)fp->seqstat & SEQSTAT_EXCAUSE) {
- printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n",
- (void *)bfin_read_DCPLB_FAULT_ADDR());
- printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n",
- (void *)bfin_read_ICPLB_FAULT_ADDR());
+ decode_address(buf, bfin_read_DCPLB_FAULT_ADDR());
+ printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
+ decode_address(buf, bfin_read_ICPLB_FAULT_ADDR());
+ printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
}
- printk("\n\n");
+ printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
+ printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
+ fp->r0, fp->r1, fp->r2, fp->r3);
+ printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
+ fp->r4, fp->r5, fp->r6, fp->r7);
+ printk(KERN_NOTICE " P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n",
+ fp->p0, fp->p1, fp->p2, fp->p3);
+ printk(KERN_NOTICE " P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n",
+ fp->p4, fp->p5, fp->fp, (long)fp);
+ printk(KERN_NOTICE " LB0: %08lx LT0: %08lx LC0: %08lx\n",
+ fp->lb0, fp->lt0, fp->lc0);
+ printk(KERN_NOTICE " LB1: %08lx LT1: %08lx LC1: %08lx\n",
+ fp->lb1, fp->lt1, fp->lc1);
+ printk(KERN_NOTICE " B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n",
+ fp->b0, fp->l0, fp->m0, fp->i0);
+ printk(KERN_NOTICE " B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n",
+ fp->b1, fp->l1, fp->m1, fp->i1);
+ printk(KERN_NOTICE " B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n",
+ fp->b2, fp->l2, fp->m2, fp->i2);
+ printk(KERN_NOTICE " B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n",
+ fp->b3, fp->l3, fp->m3, fp->i3);
+ printk(KERN_NOTICE "A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
+ fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+
+ printk(KERN_NOTICE "USP : %08lx ASTAT: %08lx\n",
+ rdusp(), fp->astat);
+
+ printk(KERN_NOTICE "\n");
}
#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
@@ -752,6 +796,8 @@
break;
}
+ oops_in_progress = 1;
+
printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR());
printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR());
dump_bfin_regs(fp, (void *)fp->retx);
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index eec4367..9b75bc8 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -172,9 +172,14 @@
__ebss_b_l1 = .;
}
- ___init_end = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
+ /* Force trailing alignment of our init section so that when we
+ * free our init memory, we don't leave behind a partial page.
+ */
+ . = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
+ . = ALIGN(PAGE_SIZE);
+ ___init_end = .;
- .bss LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1) :
+ .bss :
{
. = ALIGN(4);
___bss_start = .;
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 3e884f3..bf1bedc 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -41,9 +41,11 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb_sl811.h>
+#include <asm/cplb.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
+#include <asm/nand.h>
#include <linux/spi/ad7877.h>
/*
@@ -102,6 +104,53 @@
arch_initcall(bfin_isp1761_init);
#endif
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+static struct mtd_partition partition_info[] = {
+ {
+ .name = "Linux Kernel",
+ .offset = 0,
+ .size = 4 * SIZE_1M,
+ },
+ {
+ .name = "File System",
+ .offset = 4 * SIZE_1M,
+ .size = (256 - 4) * SIZE_1M,
+ },
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+ .page_size = NFC_PG_SIZE_256,
+ .data_width = NFC_NWIDTH_8,
+ .partitions = partition_info,
+ .nr_partitions = ARRAY_SIZE(partition_info),
+ .rd_dly = 3,
+ .wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+ {
+ .start = NFC_CTL,
+ .end = NFC_DATA_RD + 2,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = CH_NFC,
+ .end = CH_NFC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bf5xx_nand_device = {
+ .name = "bf5xx-nand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+ .resource = bf5xx_nand_resources,
+ .dev = {
+ .platform_data = &bf5xx_nand_platform,
+ },
+};
+#endif
+
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
static struct resource bfin_pcmcia_cf_resources[] = {
{
@@ -650,6 +699,10 @@
#endif
static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+ &bf5xx_nand_device,
+#endif
+
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
&bfin_pcmcia_cf_device,
#endif
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
new file mode 100644
index 0000000..b941550
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -0,0 +1,345 @@
+/*
+ * File: arch/blackfin/mach-bf533/H8606.c
+ * Based on: arch/blackfin/mach-bf533/stamp.c
+ * Author: Javier Herrero <jherrero@hvsistemas.es>
+ *
+ * Created: 2007
+ * Description: Board Info File for the HV Sistemas H8606 board
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc
+ * Copyright 2007 HV Sistemas S.L.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb_isp1362.h>
+#endif
+#include <linux/pata_platform.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "HV Sistemas H8606";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+/*
+* Driver needs to know address, irq and flag pin.
+ */
+ #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = 0x20300000,
+ .end = 0x20300000 + 8,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PF10,
+ .end = IRQ_PF10,
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+ },
+};
+
+static struct platform_device dm9000_device = {
+ .id = 0,
+ .name = "dm9000",
+ .resource = dm9000_resources,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PROG_INTB,
+ .end = IRQ_PROG_INTB,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ }, {
+ /*
+ * denotes the flag pin and is used directly if
+ * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
+ */
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20300000,
+ .end = 0x20300000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PF10,
+ .end = IRQ_PF10,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00060000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ }, {
+ .name = "kernel",
+ .size = 0x100000,
+ .offset = 0x60000
+ }, {
+ .name = "file system",
+ .size = 0x6a0000,
+ .offset = 0x00160000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .ctl_reg = 0x1000,
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .ctl_reg = 0x1000,
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+ .ctl_reg = 0x1c04,
+ .enable_dma = 0,
+ .bits_per_word = 8,
+ .cs_change_per_word = 1,
+};
+#endif
+
+/* Notice: for blackfin, the speed_hz is the value of register
+ * SPI_BAUD, not the real baudrate */
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ /* this value is the baudrate divisor */
+ .max_speed_hz = 50000000, /* actual baudrate is SCLK/(2xspeed_hz) */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 4, /* actual baudrate is SCLK/(2xspeed_hz) */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 16,
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_PBX)
+ {
+ .modalias = "fxs-spi",
+ .max_speed_hz = 4,
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data = &spi_si3xxx_chip_info,
+ },
+
+ {
+ .modalias = "fxo-spi",
+ .max_speed_hz = 4,
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data = &spi_si3xxx_chip_info,
+ },
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
+ .dev = {
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+static struct platform_device bfin_fb_device = {
+ .name = "bf537-fb",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+ &dm9000_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+};
+
+static int __init H8606_init(void)
+{
+ printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(H8606_init);
\ No newline at end of file
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index 12a631a..2452b45 100644
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -6,3 +6,4 @@
obj-$(CONFIG_BFIN533_STAMP) += stamp.o
obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o
+obj-$(CONFIG_H8606_HVSISTEMAS) += H8606.o
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 1c5a86a..a863522 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -46,7 +46,7 @@
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
-
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader",
@@ -76,12 +76,15 @@
.enable_dma = 0, /* use dma transfer with this chip*/
.bits_per_word = 8,
};
+#endif
/* SPI ADC chip */
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
static struct bfin5xx_spi_chip spi_adc_chip_info = {
.enable_dma = 1, /* use dma transfer with this chip*/
.bits_per_word = 16,
};
+#endif
#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
@@ -90,7 +93,15 @@
};
#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
@@ -100,7 +111,11 @@
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
.mode = SPI_MODE_3,
- }, {
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, /* Framework bus number */
@@ -108,6 +123,8 @@
.platform_data = NULL, /* No spi_driver specific config */
.controller_data = &spi_adc_chip_info,
},
+#endif
+
#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
{
.modalias = "ad1836-spi",
@@ -117,6 +134,27 @@
.controller_data = &ad1836_spi_chip_info,
},
#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
};
/* SPI (0) */
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index f84be4e..62ffa50 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -218,7 +218,7 @@
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
{
.modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
@@ -227,7 +227,7 @@
},
{
.modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 52e2320..2915931 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -281,8 +281,8 @@
.end = 0x20200000 + 0x100,
.flags = IORESOURCE_MEM,
}, {
- .start = IRQ_PF7,
- .end = IRQ_PF7,
+ .start = IRQ_PH14,
+ .end = IRQ_PH14,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index cc41f6c..5f7b91f 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -450,7 +450,7 @@
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
{
.modalias = "spi_mmc_dummy",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
@@ -459,7 +459,7 @@
},
{
.modalias = "spi_mmc",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
@@ -612,7 +612,7 @@
static struct pata_platform_info bfin_pata_platform_data = {
.ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+ .irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
};
static struct resource bfin_pata_resources[] = {
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index e3ad580..1b13fa47 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -917,7 +917,7 @@
.long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */
.long _ex_replaceable /* 0x02 - User Defined */
.long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */
- .long _ex_replaceable /* 0x04 - User Defined */
+ .long _ex_trap_c /* 0x04 - User Defined - dump trace buffer */
.long _ex_replaceable /* 0x05 - User Defined */
.long _ex_replaceable /* 0x06 - User Defined */
.long _ex_replaceable /* 0x07 - User Defined */
diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c
index 671ce1e8..662f7b12 100644
--- a/arch/frv/mb93090-mb00/pci-dma.c
+++ b/arch/frv/mb93090-mb00/pci-dma.c
@@ -15,6 +15,7 @@
#include <linux/list.h>
#include <linux/pci.h>
#include <linux/highmem.h>
+#include <linux/scatterlist.h>
#include <asm/io.h>
void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
@@ -86,7 +87,7 @@
dampr2 = __get_DAMPR(2);
for (i = 0; i < nents; i++) {
- vaddr = kmap_atomic(sg[i].page, __KM_CACHE);
+ vaddr = kmap_atomic(sg_page(&sg[i]), __KM_CACHE);
frv_dcache_writeback((unsigned long) vaddr,
(unsigned long) vaddr + PAGE_SIZE);
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index e2e9f57..ff6a871 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -1,6 +1,6 @@
#
# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/config-language.txt.
+# see Documentation/kbuild/kconfig-language.txt.
#
mainmenu "uClinux/h8300 (w/o MMU) Kernel Configuration"
diff --git a/arch/i386/.gitignore b/arch/i386/.gitignore
deleted file mode 100644
index 36ef4c3..0000000
--- a/arch/i386/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-boot
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 75fd90d..7f6b237 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6
-# Tue Sep 18 11:24:01 2007
+# Linux kernel version: 2.6.23
+# Thu Oct 18 16:03:40 2007
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -28,6 +28,8 @@
CONFIG_LOG_BUF_SHIFT=20
CONFIG_CGROUPS=y
CONFIG_CPUSETS=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
@@ -48,7 +50,6 @@
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -69,6 +70,7 @@
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
@@ -93,6 +95,7 @@
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
@@ -113,10 +116,10 @@
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
-CONFIG_IA64_PAGE_SIZE_16KB=y
-# CONFIG_IA64_PAGE_SIZE_64KB is not set
-# CONFIG_PGTABLE_3 is not set
-CONFIG_PGTABLE_4=y
+# CONFIG_IA64_PAGE_SIZE_16KB is not set
+CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
@@ -131,6 +134,7 @@
CONFIG_NR_CPUS=1024
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
@@ -144,6 +148,7 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
@@ -171,6 +176,7 @@
CONFIG_IA64_MC_ERR_INJECT=y
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
+# CONFIG_IA64_HP_AML_NFW is not set
#
# SN Devices
@@ -220,7 +226,6 @@
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
-# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
@@ -231,10 +236,6 @@
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_SGI=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -271,6 +272,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -342,6 +344,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@@ -402,7 +405,12 @@
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEPNP is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
@@ -410,8 +418,6 @@
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
@@ -439,7 +445,6 @@
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -482,6 +487,7 @@
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
@@ -492,6 +498,7 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -532,6 +539,7 @@
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
@@ -556,6 +564,7 @@
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
@@ -588,10 +597,6 @@
CONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
@@ -613,13 +618,16 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -638,12 +646,15 @@
CONFIG_CHELSIO_T1_1G=y
# CONFIG_CHELSIO_T1_NAPI is not set
CONFIG_CHELSIO_T3=m
+CONFIG_IXGBE=m
# CONFIG_IXGB is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -669,6 +680,7 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
@@ -690,7 +702,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -714,6 +725,7 @@
# Character devices
#
CONFIG_VT=y
+# CONFIG_VT_UNICODE is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -760,9 +772,6 @@
CONFIG_EFI_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-CONFIG_AGP=y
-CONFIG_AGP_SGI_TIOCA=y
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
@@ -782,6 +791,12 @@
# CONFIG_HWMON is not set
#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
@@ -796,15 +811,18 @@
#
# Graphics support
#
+CONFIG_AGP=y
+CONFIG_AGP_SGI_TIOCA=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
#
# Console display driver support
@@ -820,6 +838,7 @@
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
@@ -951,19 +970,6 @@
# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
# Userspace I/O
#
# CONFIG_UIO is not set
@@ -1005,6 +1011,8 @@
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
@@ -1043,7 +1051,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1062,10 +1069,7 @@
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1082,6 +1086,7 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1118,10 +1123,6 @@
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -1162,10 +1163,6 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
@@ -1223,6 +1220,7 @@
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_IA64_GRANULE_16MB=y
@@ -1238,6 +1236,7 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
@@ -1262,6 +1261,7 @@
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1275,9 +1275,11 @@
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 3f7ea13..6216eba 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -1231,7 +1231,7 @@
#ifdef CONFIG_PROC_VMCORE
/* locate the size find a the descriptor at a certain address */
-unsigned long
+unsigned long __init
vmcore_find_descriptor_size (unsigned long address)
{
void *efi_map_start, *efi_map_end, *p;
diff --git a/arch/ia64/kernel/gate.lds.S b/arch/ia64/kernel/gate.lds.S
index 44817d9..454d7a7 100644
--- a/arch/ia64/kernel/gate.lds.S
+++ b/arch/ia64/kernel/gate.lds.S
@@ -20,6 +20,8 @@
.gnu.version_d : { *(.gnu.version_d) }
.gnu.version_r : { *(.gnu.version_r) }
+ .note : { *(.note*) } :readable :note
+
.dynamic : { *(.dynamic) } :readable :dynamic
/*
@@ -83,6 +85,7 @@
epc PT_LOAD FILEHDR PHDRS FLAGS(1); /* PF_X */
#endif
dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
+ note PT_NOTE FLAGS(4); /* PF_R */
unwind PT_IA_64_UNWIND;
}
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 2fdbd5c..e86d029 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -109,7 +109,7 @@
write_msi_msg(irq, &msg);
set_irq_chip_and_handler(irq, &ia64_msi_chip, handle_edge_irq);
- return irq;
+ return 0;
}
void ia64_teardown_msi_irq(unsigned int irq)
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index ae6c3c0..2b3751e 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -417,34 +417,6 @@
#endif
}
-#ifdef CONFIG_SMP
-static void __init
-check_for_logical_procs (void)
-{
- pal_logical_to_physical_t info;
- s64 status;
-
- status = ia64_pal_logical_to_phys(0, &info);
- if (status == -1) {
- printk(KERN_INFO "No logical to physical processor mapping "
- "available\n");
- return;
- }
- if (status) {
- printk(KERN_ERR "ia64_pal_logical_to_phys failed with %ld\n",
- status);
- return;
- }
- /*
- * Total number of siblings that BSP has. Though not all of them
- * may have booted successfully. The correct number of siblings
- * booted is in info.overview_num_log.
- */
- smp_num_siblings = info.overview_tpc;
- smp_num_cpucores = info.overview_cpp;
-}
-#endif
-
static __initdata int nomca;
static __init int setup_nomca(char *s)
{
@@ -540,15 +512,6 @@
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
- check_for_logical_procs();
- if (smp_num_cpucores > 1)
- printk(KERN_INFO
- "cpu package is Multi-Core capable: number of cores=%d\n",
- smp_num_cpucores);
- if (smp_num_siblings > 1)
- printk(KERN_INFO
- "cpu package is Multi-Threading capable: number of siblings=%d\n",
- smp_num_siblings);
#endif
cpu_init(); /* initialize the bootstrap CPU */
@@ -661,12 +624,13 @@
lpj*HZ/500000, (lpj*HZ/5000) % 100);
#ifdef CONFIG_SMP
seq_printf(m, "siblings : %u\n", cpus_weight(cpu_core_map[cpunum]));
+ if (c->socket_id != -1)
+ seq_printf(m, "physical id: %u\n", c->socket_id);
if (c->threads_per_core > 1 || c->cores_per_socket > 1)
seq_printf(m,
- "physical id: %u\n"
- "core id : %u\n"
- "thread id : %u\n",
- c->socket_id, c->core_id, c->thread_id);
+ "core id : %u\n"
+ "thread id : %u\n",
+ c->core_id, c->thread_id);
#endif
seq_printf(m,"\n");
@@ -778,6 +742,9 @@
c->socket_id = -1;
identify_siblings(c);
+
+ if (c->threads_per_core > smp_num_siblings)
+ smp_num_siblings = c->threads_per_core;
#endif
c->ppn = cpuid.field.ppn;
c->number = cpuid.field.number;
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index c57dbce..f0fc4d8 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -142,7 +142,6 @@
EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
int smp_num_siblings = 1;
-int smp_num_cpucores = 1;
/* which logical CPU number maps to which CPU (physical APIC ID) */
volatile int ia64_cpu_to_sapicid[NR_CPUS];
@@ -886,13 +885,17 @@
u16 pltid;
pal_logical_to_physical_t info;
- if (smp_num_cpucores == 1 && smp_num_siblings == 1)
- return;
-
if ((status = ia64_pal_logical_to_phys(-1, &info)) != PAL_STATUS_SUCCESS) {
- printk(KERN_ERR "ia64_pal_logical_to_phys failed with %ld\n",
- status);
- return;
+ if (status != PAL_STATUS_UNIMPLEMENTED) {
+ printk(KERN_ERR
+ "ia64_pal_logical_to_phys failed with %ld\n",
+ status);
+ return;
+ }
+
+ info.overview_ppid = 0;
+ info.overview_cpp = 1;
+ info.overview_tpc = 1;
}
if ((status = ia64_sal_physical_id_info(&pltid)) != PAL_STATUS_SUCCESS) {
printk(KERN_ERR "ia64_sal_pltid failed with %ld\n", status);
@@ -900,6 +903,10 @@
}
c->socket_id = (pltid << 8) | info.overview_ppid;
+
+ if (info.overview_cpp == 1 && info.overview_tpc == 1)
+ return;
+
c->cores_per_socket = info.overview_cpp;
c->threads_per_core = info.overview_tpc;
c->num_log = info.overview_num_log;
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index c6c19bf..25aef62 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -472,7 +472,7 @@
unsigned long zone;
};
-static int
+static int __meminit
virtual_memmap_init (u64 start, u64 end, void *arg)
{
struct memmap_init_callback_data *args;
@@ -503,7 +503,7 @@
return 0;
}
-void
+void __meminit
memmap_init (unsigned long size, int nid, unsigned long zone,
unsigned long start_pfn)
{
diff --git a/arch/ia64/scripts/check-segrel.lds b/arch/ia64/scripts/check-segrel.lds
index 1c2f13e..85a0d54 100644
--- a/arch/ia64/scripts/check-segrel.lds
+++ b/arch/ia64/scripts/check-segrel.lds
@@ -1,6 +1,7 @@
SECTIONS {
. = SIZEOF_HEADERS;
.rodata : { *(.rodata) } :ro
+ .note : { *(.note*) }
. = 0xa0000;
.data : { *(.data) } :dat
/DISCARD/ : { *(*) }
diff --git a/arch/ia64/sn/kernel/mca.c b/arch/ia64/sn/kernel/mca.c
index 3db62f2..868c9aa 100644
--- a/arch/ia64/sn/kernel/mca.c
+++ b/arch/ia64/sn/kernel/mca.c
@@ -98,6 +98,7 @@
while (*sn_oemdata_size > sn_oemdata_bufsize) {
u8 *newbuf = vmalloc(*sn_oemdata_size);
if (!newbuf) {
+ mutex_unlock(&sn_oemdata_mutex);
printk(KERN_ERR "%s: unable to extend sn_oemdata\n",
__FUNCTION__);
return 1;
diff --git a/arch/m68k/kernel/dma.c b/arch/m68k/kernel/dma.c
index ef490e1..6f8c080 100644
--- a/arch/m68k/kernel/dma.c
+++ b/arch/m68k/kernel/dma.c
@@ -9,10 +9,10 @@
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <linux/kernel.h>
+#include <linux/scatterlist.h>
#include <linux/vmalloc.h>
#include <asm/pgalloc.h>
-#include <asm/scatterlist.h>
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t flag)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 61262c5..2c7d6c2 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -546,6 +546,7 @@
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
config SNI_RM
@@ -583,6 +584,7 @@
config TOSHIBA_JMR3927
bool "Toshiba JMR-TX3927 board"
+ select CEVT_TXX9
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_TX3927
@@ -597,6 +599,7 @@
config TOSHIBA_RBTX4927
bool "Toshiba RBTX49[23]7 board"
select CEVT_R4K
+ select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
@@ -618,6 +621,7 @@
config TOSHIBA_RBTX4938
bool "Toshiba RBTX4938 board"
select CEVT_R4K
+ select CEVT_TXX9
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
@@ -730,12 +734,27 @@
config BOOT_RAW
bool
+config CEVT_BCM1480
+ bool
+
config CEVT_GT641XX
bool
config CEVT_R4K
bool
+config CEVT_SB1250
+ bool
+
+config CEVT_TXX9
+ bool
+
+config CSRC_BCM1480
+ bool
+
+config CSRC_SB1250
+ bool
+
config CFE
bool
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c
index 59e932a9..ddfb7f0 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@@ -318,38 +318,6 @@
.end = end_irq,
};
-#ifdef CONFIG_PM
-void startup_match20_interrupt(irq_handler_t handler)
-{
- struct irq_desc *desc = &irq_desc[AU1000_TOY_MATCH2_INT];
-
- static struct irqaction action;
- memset(&action, 0, sizeof(struct irqaction));
-
- /*
- * This is a big problem.... since we didn't use request_irq
- * when kernel/irq.c calls probe_irq_xxx this interrupt will
- * be probed for usage. This will end up disabling the device :(
- * Give it a bogus "action" pointer -- this will keep it from
- * getting auto-probed!
- *
- * By setting the status to match that of request_irq() we
- * can avoid it. --cgray
- */
- action.dev_id = handler;
- action.flags = IRQF_DISABLED;
- cpus_clear(action.mask);
- action.name = "Au1xxx TOY";
- action.handler = handler;
- action.next = NULL;
-
- desc->action = &action;
- desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
-
- local_enable_irq(AU1000_TOY_MATCH2_INT);
-}
-#endif
-
static void __init setup_local_irq(unsigned int irq_nr, int type, int int_req)
{
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index 2556399..f113b51 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -67,7 +67,7 @@
unsigned long wtimer;
#ifdef CONFIG_PM
-irqreturn_t counter0_irq(int irq, void *dev_id)
+static irqreturn_t counter0_irq(int irq, void *dev_id)
{
unsigned long pc0;
int time_elapsed;
@@ -117,6 +117,13 @@
return IRQ_HANDLED;
}
+struct irqaction counter0_action = {
+ .handler = counter0_irq,
+ .flags = IRQF_DISABLED,
+ .name = "alchemy-toy",
+ .dev_id = NULL,
+};
+
/* When we wakeup from sleep, we have to "catch up" on all of the
* timer ticks we have missed.
*/
@@ -221,7 +228,7 @@
return (cpu_speed / HZ);
}
-void __init plat_timer_setup(struct irqaction *irq)
+void __init plat_time_init(void)
{
unsigned int est_freq;
@@ -255,15 +262,10 @@
* we do this.
*/
if (no_au1xxx_32khz) {
- unsigned int c0_status;
-
printk("WARNING: no 32KHz clock found.\n");
- /* Ensure we get CPO_COUNTER interrupts.
- */
- c0_status = read_c0_status();
- c0_status |= IE_IRQ5;
- write_c0_status(c0_status);
+ /* Ensure we get CPO_COUNTER interrupts. */
+ set_c0_status(IE_IRQ5);
}
else {
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
@@ -280,7 +282,7 @@
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
- startup_match20_interrupt(counter0_irq);
+ setup_irq(AU1000_TOY_MATCH2_INT, &counter0_action);
/* We can use the real 'wait' instruction.
*/
diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/au1000/mtx-1/Makefile
index 764bf9f..85a9094 100644
--- a/arch/mips/au1000/mtx-1/Makefile
+++ b/arch/mips/au1000/mtx-1/Makefile
@@ -8,3 +8,6 @@
#
lib-y := init.o board_setup.o irqmap.o
+obj-y := platform.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c
new file mode 100644
index 0000000..49c0fb4
--- /dev/null
+++ b/arch/mips/au1000/mtx-1/platform.c
@@ -0,0 +1,77 @@
+/*
+ * MTX-1 platform devices registration
+ *
+ * Copyright (C) 2007, Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+
+#include <asm/gpio.h>
+
+static struct resource mtx1_wdt_res[] = {
+ [0] = {
+ .start = 15,
+ .end = 15,
+ .name = "mtx1-wdt-gpio",
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device mtx1_wdt = {
+ .name = "mtx1-wdt",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mtx1_wdt_res),
+ .resource = mtx1_wdt_res,
+};
+
+static struct gpio_led default_leds[] = {
+ {
+ .name = "mtx1:green",
+ .gpio = 211,
+ }, {
+ .name = "mtx1:red",
+ .gpio = 212,
+ },
+};
+
+static struct gpio_led_platform_data mtx1_led_data = {
+ .num_leds = ARRAY_SIZE(default_leds),
+ .leds = default_leds,
+};
+
+static struct platform_device mtx1_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mtx1_led_data,
+ }
+};
+
+static struct __initdata platform_device * mtx1_devs[] = {
+ &mtx1_gpio_leds,
+ &mtx1_wdt
+};
+
+static int __init mtx1_register_devices(void)
+{
+ return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
+}
+
+arch_initcall(mtx1_register_devices);
diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile
index 22b673c..970b1b1 100644
--- a/arch/mips/au1000/pb1200/Makefile
+++ b/arch/mips/au1000/pb1200/Makefile
@@ -3,3 +3,5 @@
#
lib-y := init.o board_setup.o irqmap.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c
index 5dbc986..b98bebf 100644
--- a/arch/mips/au1000/pb1200/board_setup.c
+++ b/arch/mips/au1000/pb1200/board_setup.c
@@ -68,9 +68,11 @@
void __init board_setup(void)
{
char *argptr = NULL;
- u32 pin_func;
#if 0
+ {
+ u32 pin_func;
+
/* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
* but it is board specific code, so put it here.
*/
@@ -81,11 +83,13 @@
au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
au_sync();
+ }
#endif
#if defined(CONFIG_I2C_AU1550)
{
u32 freq0, clksrc;
+ u32 pin_func;
/* Select SMBUS in CPLD */
bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c
index bdf00e2..c096be4 100644
--- a/arch/mips/au1000/pb1200/irqmap.c
+++ b/arch/mips/au1000/pb1200/irqmap.c
@@ -94,51 +94,41 @@
bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
}
-static unsigned int pb1200_startup_irq( unsigned int irq_nr )
+static unsigned int pb1200_setup_cascade(void)
{
- if (++pb1200_cascade_en == 1)
- {
- request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
- 0, "Pb1200 Cascade", (void *)&pb1200_cascade_handler );
-#ifdef CONFIG_MIPS_PB1200
- /* We have a problem with CPLD rev3. Enable a workaround */
- if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
- {
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
- printk("updated to latest revision. This software will not\n");
- printk("work on anything less than CPLD rev4\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- while(1);
- }
-#endif
- }
- pb1200_enable_irq(irq_nr);
+ int err;
+
+ err = request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+ 0, "Pb1200 Cascade", &pb1200_cascade_handler);
+ if (err)
+ return err;
+
return 0;
}
-static void pb1200_shutdown_irq( unsigned int irq_nr )
+static unsigned int pb1200_startup_irq(unsigned int irq)
{
- pb1200_disable_irq(irq_nr);
- if (--pb1200_cascade_en == 0)
- {
- free_irq(AU1000_GPIO_7, &pb1200_cascade_handler );
+ if (++pb1200_cascade_en == 1) {
+ int res;
+
+ res = pb1200_setup_cascade();
+ if (res)
+ return res;
}
- return;
+
+ pb1200_enable_irq(irq);
+
+ return 0;
}
-static struct irq_chip external_irq_type =
+static void pb1200_shutdown_irq(unsigned int irq)
{
+ pb1200_disable_irq(irq);
+ if (--pb1200_cascade_en == 0)
+ free_irq(AU1000_GPIO_7, &pb1200_cascade_handler);
+}
+
+static struct irq_chip external_irq_type = {
#ifdef CONFIG_MIPS_PB1200
.name = "Pb1200 Ext",
#endif
@@ -155,16 +145,38 @@
void _board_init_irq(void)
{
- int irq_nr;
+ unsigned int irq;
- for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
- {
- set_irq_chip_and_handler(irq_nr, &external_irq_type,
+#ifdef CONFIG_MIPS_PB1200
+ /* We have a problem with CPLD rev3. Enable a workaround */
+ if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
+ printk("updated to latest revision. This software will not\n");
+ printk("work on anything less than CPLD rev4\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ panic("Game over. Your score is 0.");
+ }
+#endif
+
+ for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) {
+ set_irq_chip_and_handler(irq, &external_irq_type,
handle_level_irq);
- pb1200_disable_irq(irq_nr);
+ pb1200_disable_irq(irq);
}
- /* GPIO_7 can not be hooked here, so it is hooked upon first
- request of any source attached to the cascade */
+ /*
+ * GPIO_7 can not be hooked here, so it is hooked upon first
+ * request of any source attached to the cascade
+ */
}
-
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index 404ca92..6dd8f0d 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -68,24 +68,23 @@
int titan_irqflags;
+/*
+ * The eXcite platform uses the alternate timer interrupt
+ *
+ * Fixme: At the time of this writing cevt-r4k.c doesn't yet know about how
+ * to handle the alternate timer interrupt of the RM9000.
+ */
void __init plat_time_init(void)
{
const u32 modebit5 = ocd_readl(0x00e4);
- unsigned int
- mult = ((modebit5 >> 11) & 0x1f) + 2,
- div = ((modebit5 >> 16) & 0x1f) + 2;
+ unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2;
+ unsigned int div = ((modebit5 >> 16) & 0x1f) + 2;
- if (div == 33) div = 1;
+ if (div == 33)
+ div = 1;
mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2;
}
-void __init plat_timer_setup(struct irqaction *irq)
-{
- /* The eXcite platform uses the alternate timer interrupt */
- set_c0_intcontrol(0x80);
- setup_irq(TIMER_IRQ, irq);
-}
-
static int __init excite_init_console(void)
{
#if defined(CONFIG_SERIAL_8250)
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 885b633..5a8b7ac 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -738,7 +738,6 @@
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_AU1X00_GPIO is not set
-# CONFIG_TS_AU1X00_ADS7846 is not set
#
# Serial drivers
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index e3c3a07..d4ed90b 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -714,7 +714,6 @@
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_AU1X00_GPIO is not set
-# CONFIG_TS_AU1X00_ADS7846 is not set
#
# Serial drivers
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index 9aa7c3e..a055657 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -775,7 +775,6 @@
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_AU1X00_GPIO is not set
-# CONFIG_TS_AU1X00_ADS7846 is not set
#
# Serial drivers
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 99240668..0ad08cf 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -811,7 +811,6 @@
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_AU1X00_GPIO is not set
-# CONFIG_TS_AU1X00_ADS7846 is not set
#
# Serial drivers
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 19992f7..057c7d4 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -856,7 +856,6 @@
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_AU1X00_GPIO is not set
-# CONFIG_TS_AU1X00_ADS7846 is not set
#
# Serial drivers
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index d53fa8f..703d28d 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -731,7 +731,6 @@
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_AU1X00_GPIO is not set
-# CONFIG_TS_AU1X00_ADS7846 is not set
#
# Serial drivers
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index dc4aa0c..82f0c5c 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -849,7 +849,6 @@
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_AU1X00_GPIO is not set
-# CONFIG_TS_AU1X00_ADS7846 is not set
#
# Serial drivers
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 24428e1..147a4fc 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -842,7 +842,6 @@
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_AU1X00_GPIO is not set
-# CONFIG_TS_AU1X00_ADS7846 is not set
#
# Serial drivers
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 49dfcef..c279822 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -468,7 +468,7 @@
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDE_SWARM is not set
+CONFIG_BLK_DEV_IDE_SWARM=y
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
diff --git a/arch/mips/gt64120/wrppmc/time.c b/arch/mips/gt64120/wrppmc/time.c
index b207e7f..668dbd5 100644
--- a/arch/mips/gt64120/wrppmc/time.c
+++ b/arch/mips/gt64120/wrppmc/time.c
@@ -19,12 +19,6 @@
#define WRPPMC_CPU_CLK_FREQ 40000000 /* 40MHZ */
-void __init plat_timer_setup(struct irqaction *irq)
-{
- /* Install ISR for timer interrupt */
- setup_irq(WRPPMC_MIPS_TIMER_IRQ, irq);
-}
-
/*
* Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect
*
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
index ae25b48..d7f8a78 100644
--- a/arch/mips/jazz/irq.c
+++ b/arch/mips/jazz/irq.c
@@ -97,9 +97,10 @@
if (pending & IE_IRQ4) {
r4030_read_reg32(JAZZ_TIMER_REGISTER);
do_IRQ(JAZZ_TIMER_IRQ);
- } else if (pending & IE_IRQ2)
- do_IRQ(r4030_read_reg32(JAZZ_EISA_IRQ_ACK));
- else if (pending & IE_IRQ1) {
+ } else if (pending & IE_IRQ2) {
+ irq = *(volatile u8 *)JAZZ_EISA_IRQ_ACK;
+ do_IRQ(irq);
+ } else if (pending & IE_IRQ1) {
irq = *(volatile u8 *)JAZZ_IO_IRQ_SOURCE >> 2;
if (likely(irq > 0))
do_IRQ(irq + JAZZ_IRQ_START - 1);
@@ -117,16 +118,16 @@
struct clock_event_device r4030_clockevent = {
.name = "r4030",
.features = CLOCK_EVT_FEAT_PERIODIC,
- .rating = 100,
+ .rating = 300,
.irq = JAZZ_TIMER_IRQ,
- .cpumask = CPU_MASK_CPU0,
.set_mode = r4030_set_mode,
};
static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id)
{
- r4030_clockevent.event_handler(&r4030_clockevent);
+ struct clock_event_device *cd = dev_id;
+ cd->event_handler(cd);
return IRQ_HANDLED;
}
@@ -134,15 +135,22 @@
.handler = r4030_timer_interrupt,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_CPU0,
- .name = "timer",
+ .name = "R4030 timer",
};
void __init plat_time_init(void)
{
- struct irqaction *irq = &r4030_timer_irqaction;
+ struct clock_event_device *cd = &r4030_clockevent;
+ struct irqaction *action = &r4030_timer_irqaction;
+ unsigned int cpu = smp_processor_id();
BUG_ON(HZ != 100);
+ cd->cpumask = cpumask_of_cpu(cpu);
+ clockevents_register_device(cd);
+ action->dev_id = cd;
+ setup_irq(JAZZ_TIMER_IRQ, action);
+
/*
* Set clock to 100Hz.
*
@@ -150,8 +158,5 @@
* a programmable 4-bit divider. This makes it fairly inflexible.
*/
r4030_write_reg32(JAZZ_TIMER_INTERVAL, 9);
- setup_irq(JAZZ_TIMER_IRQ, irq);
-
- clockevents_register_device(&r4030_clockevent);
setup_pit_timer();
}
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
index edb9e59..06e01c8 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/jmr3927/rbhma3100/setup.c
@@ -27,17 +27,13 @@
* Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
*/
-#include <linux/clockchips.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
-#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/ide.h>
-#include <linux/irq.h>
#include <linux/ioport.h>
-#include <linux/param.h> /* for HZ */
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
@@ -48,17 +44,13 @@
#endif
#include <asm/addrspace.h>
-#include <asm/time.h>
+#include <asm/txx9tmr.h>
#include <asm/reboot.h>
#include <asm/jmr3927/jmr3927.h>
#include <asm/mipsregs.h>
extern void puts(const char *cp);
-/* Tick Timer divider */
-#define JMR3927_TIMER_CCD 0 /* 1/2 */
-#define JMR3927_TIMER_CLK (JMR3927_IMCLK / (2 << JMR3927_TIMER_CCD))
-
/* don't enable - see errata */
static int jmr3927_ccfg_toeon;
@@ -93,66 +85,12 @@
while (1);
}
-static cycle_t jmr3927_hpt_read(void)
-{
- /* We assume this function is called xtime_lock held. */
- return jiffies * (JMR3927_TIMER_CLK / HZ) + jmr3927_tmrptr->trr;
-}
-
-static void jmr3927_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- /* Nothing to do here */
-}
-
-struct clock_event_device jmr3927_clock_event_device = {
- .name = "MIPS",
- .features = CLOCK_EVT_FEAT_PERIODIC,
- .shift = 32,
- .rating = 300,
- .cpumask = CPU_MASK_CPU0,
- .irq = JMR3927_IRQ_TICK,
- .set_mode = jmr3927_set_mode,
-};
-
-static irqreturn_t jmr3927_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *cd = &jmr3927_clock_event_device;
-
- jmr3927_tmrptr->tisr = 0; /* ack interrupt */
-
- cd->event_handler(cd);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction jmr3927_timer_irqaction = {
- .handler = jmr3927_timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
- .name = "jmr3927-timer",
-};
-
void __init plat_time_init(void)
{
- struct clock_event_device *cd;
-
- clocksource_mips.read = jmr3927_hpt_read;
- mips_hpt_frequency = JMR3927_TIMER_CLK;
-
- jmr3927_tmrptr->cpra = JMR3927_TIMER_CLK / HZ;
- jmr3927_tmrptr->itmr = TXx927_TMTITMR_TIIE | TXx927_TMTITMR_TZCE;
- jmr3927_tmrptr->ccdr = JMR3927_TIMER_CCD;
- jmr3927_tmrptr->tcr =
- TXx927_TMTCR_TCE | TXx927_TMTCR_CCDE | TXx927_TMTCR_TMODE_ITVL;
-
- cd = &jmr3927_clock_event_device;
- /* Calculate the min / max delta */
- cd->mult = div_sc((unsigned long) JMR3927_IMCLK, NSEC_PER_SEC, 32);
- cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
- cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
- clockevents_register_device(cd);
-
- setup_irq(JMR3927_IRQ_TICK, &jmr3927_timer_irqaction);
+ txx9_clockevent_init(TX3927_TMR_REG(0),
+ TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
+ JMR3927_IMCLK);
+ txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
}
#define DO_WRITE_THROUGH
@@ -317,15 +255,8 @@
tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
/* TMR */
- /* disable all timers */
- for (i = 0; i < TX3927_NR_TMR; i++) {
- tx3927_tmrptr(i)->tcr = TXx927_TMTCR_CRE;
- tx3927_tmrptr(i)->tisr = 0;
- tx3927_tmrptr(i)->cpra = 0xffffffff;
- tx3927_tmrptr(i)->itmr = 0;
- tx3927_tmrptr(i)->ccdr = 0;
- tx3927_tmrptr(i)->pgmr = 0;
- }
+ for (i = 0; i < TX3927_NR_TMR; i++)
+ txx9_tmr_init(TX3927_TMR_REG(i));
/* DMA */
tx3927_dmaptr->mcr = 0;
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index d7745c8..b551535 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -8,8 +8,13 @@
ptrace.o reset.o semaphore.o setup.o signal.o syscall.o \
time.o topology.o traps.o unaligned.o
+obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o
obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o
+obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
+obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o
+obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o
+obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o
binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \
irix5sys.o sysirix.o
diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c
new file mode 100644
index 0000000..21e6d63
--- /dev/null
+++ b/arch/mips/kernel/cevt-bcm1480.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
+
+/*
+ * The general purpose timer ticks at 1MHz independent if
+ * the rest of the system
+ */
+static void sibyte_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned int cpu = smp_processor_id();
+ void __iomem *cfg, *init;
+
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ __raw_writeq(0, cfg);
+ __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
+ __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ cfg);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* Stop the timer until we actually program a shot */
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ __raw_writeq(0, cfg);
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
+ case CLOCK_EVT_MODE_RESUME:
+ ;
+ }
+}
+
+static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
+{
+ unsigned int cpu = smp_processor_id();
+ void __iomem *cfg, *init;
+
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+ __raw_writeq(delta - 1, init);
+ __raw_writeq(M_SCD_TIMER_ENABLE, cfg);
+
+ return 0;
+}
+
+static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
+{
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd = dev_id;
+ void __iomem *cfg;
+ unsigned long tmode;
+
+ if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
+ tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
+ else
+ tmode = 0;
+
+ /* ACK interrupt */
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ ____raw_writeq(tmode, cfg);
+
+ cd->event_handler(cd);
+
+ return IRQ_HANDLED;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
+static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
+static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
+
+void __cpuinit sb1480_clockevent_init(void)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
+ struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
+ struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
+ unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
+
+ BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
+
+ sprintf(name, "bcm1480-counter-%d", cpu);
+ cd->name = name;
+ cd->features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT;
+ clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
+ cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(1, cd);
+ cd->rating = 200;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = sibyte_next_event;
+ cd->set_mode = sibyte_set_mode;
+ clockevents_register_device(cd);
+
+ bcm1480_mask_irq(cpu, irq);
+
+ /*
+ * Map the timer interrupt to IP[4] of this cpu
+ */
+ __raw_writeq(IMR_IP4_VAL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+ R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
+
+ bcm1480_unmask_irq(cpu, irq);
+
+ action->handler = sibyte_counter_handler;
+ action->flags = IRQF_DISABLED | IRQF_PERCPU;
+ action->name = name;
+ action->dev_id = cd;
+ setup_irq(irq, action);
+}
diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c
index 4c651b2..c367726 100644
--- a/arch/mips/kernel/cevt-gt641xx.c
+++ b/arch/mips/kernel/cevt-gt641xx.c
@@ -49,10 +49,9 @@
static int gt641xx_timer0_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
- unsigned long flags;
u32 ctrl;
- spin_lock_irqsave(>641xx_timer_lock, flags);
+ spin_lock(>641xx_timer_lock);
ctrl = GT_READ(GT_TC_CONTROL_OFS);
ctrl &= ~(GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK);
@@ -61,7 +60,7 @@
GT_WRITE(GT_TC0_OFS, delta);
GT_WRITE(GT_TC_CONTROL_OFS, ctrl);
- spin_unlock_irqrestore(>641xx_timer_lock, flags);
+ spin_unlock(>641xx_timer_lock);
return 0;
}
@@ -69,10 +68,9 @@
static void gt641xx_timer0_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
- unsigned long flags;
u32 ctrl;
- spin_lock_irqsave(>641xx_timer_lock, flags);
+ spin_lock(>641xx_timer_lock);
ctrl = GT_READ(GT_TC_CONTROL_OFS);
ctrl &= ~(GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK);
@@ -90,7 +88,7 @@
GT_WRITE(GT_TC_CONTROL_OFS, ctrl);
- spin_unlock_irqrestore(>641xx_timer_lock, flags);
+ spin_unlock(>641xx_timer_lock);
}
static void gt641xx_timer0_event_handler(struct clock_event_device *dev)
@@ -133,9 +131,9 @@
cd = >641xx_timer0_clockevent;
cd->rating = 200 + gt641xx_base_clock / 10000000;
+ clockevent_set_clock(cd, gt641xx_base_clock);
cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
- clockevent_set_clock(cd, gt641xx_base_clock);
clockevents_register_device(>641xx_timer0_clockevent);
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index ae2984f..bab935a 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -28,7 +28,7 @@
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
- res = ((long)(read_c0_count() - cnt ) > 0) ? -ETIME : 0;
+ res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
#ifdef CONFIG_MIPS_MT_SMTC
evpe(vpflags);
local_irq_restore(flags);
@@ -179,7 +179,7 @@
static int c0_compare_int_usable(void)
{
- const unsigned int delta = 0x300000;
+ unsigned int delta;
unsigned int cnt;
/*
@@ -192,11 +192,17 @@
return 0;
}
- cnt = read_c0_count();
- cnt += delta;
- write_c0_compare(cnt);
+ for (delta = 0x10; delta <= 0x400000; delta <<= 1) {
+ cnt = read_c0_count();
+ cnt += delta;
+ write_c0_compare(cnt);
+ irq_disable_hazard();
+ if ((int)(read_c0_count() - cnt) < 0)
+ break;
+ /* increase delta if the timer was already expired */
+ }
- while ((long)(read_c0_count() - cnt) <= 0)
+ while ((int)(read_c0_count() - cnt) <= 0)
; /* Wait for expiry */
if (!c0_compare_int_pending())
@@ -218,9 +224,9 @@
uint64_t mips_freq = mips_hpt_frequency;
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd;
- unsigned int irq = MIPS_CPU_IRQ_BASE + 7;
+ unsigned int irq;
- if (!cpu_has_counter)
+ if (!cpu_has_counter || !mips_hpt_frequency)
return;
#ifdef CONFIG_MIPS_MT_SMTC
@@ -237,6 +243,15 @@
if (!c0_compare_int_usable())
return;
+ /*
+ * With vectored interrupts things are getting platform specific.
+ * get_c0_compare_int is a hook to allow a platform to return the
+ * interrupt number of it's liking.
+ */
+ irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+ if (get_c0_compare_int)
+ irq = get_c0_compare_int();
+
cd = &per_cpu(mips_clockevent_device, cpu);
cd->name = "MIPS";
@@ -261,13 +276,15 @@
clockevents_register_device(cd);
- if (!cp0_timer_irq_installed) {
+ if (!cp0_timer_irq_installed)
+ return;
+
+ cp0_timer_irq_installed = 1;
+
#ifdef CONFIG_MIPS_MT_SMTC
#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
- setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
+ setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
#else
- setup_irq(irq, &c0_compare_irqaction);
-#endif /* CONFIG_MIPS_MT_SMTC */
- cp0_timer_irq_installed = 1;
- }
+ setup_irq(irq, &c0_compare_irqaction);
+#endif
}
diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c
new file mode 100644
index 0000000..e2029d0
--- /dev/null
+++ b/arch/mips/kernel/cevt-sb1250.c
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+#define IMR_IP2_VAL K_INT_MAP_I0
+#define IMR_IP3_VAL K_INT_MAP_I1
+#define IMR_IP4_VAL K_INT_MAP_I2
+
+/*
+ * The general purpose timer ticks at 1MHz independent if
+ * the rest of the system
+ */
+static void sibyte_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned int cpu = smp_processor_id();
+ void __iomem *cfg, *init;
+
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ __raw_writeq(0, cfg);
+ __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
+ __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ cfg);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* Stop the timer until we actually program a shot */
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ __raw_writeq(0, cfg);
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
+ case CLOCK_EVT_MODE_RESUME:
+ ;
+ }
+}
+
+static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
+{
+ unsigned int cpu = smp_processor_id();
+ void __iomem *cfg, *init;
+
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+
+ __raw_writeq(delta - 1, init);
+ __raw_writeq(M_SCD_TIMER_ENABLE, cfg);
+
+ return 0;
+}
+
+static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
+{
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd = dev_id;
+ void __iomem *cfg;
+ unsigned long tmode;
+
+ if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
+ tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
+ else
+ tmode = 0;
+
+ /* ACK interrupt */
+ cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
+ ____raw_writeq(tmode, cfg);
+
+ cd->event_handler(cd);
+
+ return IRQ_HANDLED;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
+static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
+static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
+
+void __cpuinit sb1250_clockevent_init(void)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned int irq = K_INT_TIMER_0 + cpu;
+ struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
+ struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
+ unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
+
+ /* Only have 4 general purpose timers, and we use last one as hpt */
+ BUG_ON(cpu > 2);
+
+ sprintf(name, "sb1250-counter-%d", cpu);
+ cd->name = name;
+ cd->features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT;
+ clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
+ cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(1, cd);
+ cd->rating = 200;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = sibyte_next_event;
+ cd->set_mode = sibyte_set_mode;
+ clockevents_register_device(cd);
+
+ sb1250_mask_irq(cpu, irq);
+
+ /*
+ * Map the timer interrupt to IP[4] of this cpu
+ */
+ __raw_writeq(IMR_IP4_VAL,
+ IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
+ (irq << 3)));
+
+ sb1250_unmask_irq(cpu, irq);
+
+ action->handler = sibyte_counter_handler;
+ action->flags = IRQF_DISABLED | IRQF_PERCPU;
+ action->name = name;
+ action->dev_id = cd;
+ setup_irq(irq, action);
+}
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
new file mode 100644
index 0000000..795cb8f
--- /dev/null
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -0,0 +1,171 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Based on linux/arch/mips/kernel/cevt-r4k.c,
+ * linux/arch/mips/jmr3927/rbhma3100/setup.c
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/time.h>
+#include <asm/txx9tmr.h>
+
+#define TCR_BASE (TXx9_TMTCR_CCDE | TXx9_TMTCR_CRE | TXx9_TMTCR_TMODE_ITVL)
+#define TIMER_CCD 0 /* 1/2 */
+#define TIMER_CLK(imclk) ((imclk) / (2 << TIMER_CCD))
+
+static struct txx9_tmr_reg __iomem *txx9_cs_tmrptr;
+
+static cycle_t txx9_cs_read(void)
+{
+ return __raw_readl(&txx9_cs_tmrptr->trr);
+}
+
+/* Use 1 bit smaller width to use full bits in that width */
+#define TXX9_CLOCKSOURCE_BITS (TXX9_TIMER_BITS - 1)
+
+static struct clocksource txx9_clocksource = {
+ .name = "TXx9",
+ .rating = 200,
+ .read = txx9_cs_read,
+ .mask = CLOCKSOURCE_MASK(TXX9_CLOCKSOURCE_BITS),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init txx9_clocksource_init(unsigned long baseaddr,
+ unsigned int imbusclk)
+{
+ struct txx9_tmr_reg __iomem *tmrptr;
+
+ clocksource_set_clock(&txx9_clocksource, TIMER_CLK(imbusclk));
+ clocksource_register(&txx9_clocksource);
+
+ tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
+ __raw_writel(TCR_BASE, &tmrptr->tcr);
+ __raw_writel(0, &tmrptr->tisr);
+ __raw_writel(TIMER_CCD, &tmrptr->ccdr);
+ __raw_writel(TXx9_TMITMR_TZCE, &tmrptr->itmr);
+ __raw_writel(1 << TXX9_CLOCKSOURCE_BITS, &tmrptr->cpra);
+ __raw_writel(TCR_BASE | TXx9_TMTCR_TCE, &tmrptr->tcr);
+ txx9_cs_tmrptr = tmrptr;
+}
+
+static struct txx9_tmr_reg __iomem *txx9_tmrptr;
+
+static void txx9tmr_stop_and_clear(struct txx9_tmr_reg __iomem *tmrptr)
+{
+ /* stop and reset counter */
+ __raw_writel(TCR_BASE, &tmrptr->tcr);
+ /* clear pending interrupt */
+ __raw_writel(0, &tmrptr->tisr);
+}
+
+static void txx9tmr_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct txx9_tmr_reg __iomem *tmrptr = txx9_tmrptr;
+
+ txx9tmr_stop_and_clear(tmrptr);
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ __raw_writel(TXx9_TMITMR_TIIE | TXx9_TMITMR_TZCE,
+ &tmrptr->itmr);
+ /* start timer */
+ __raw_writel(((u64)(NSEC_PER_SEC / HZ) * evt->mult) >>
+ evt->shift,
+ &tmrptr->cpra);
+ __raw_writel(TCR_BASE | TXx9_TMTCR_TCE, &tmrptr->tcr);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ __raw_writel(0, &tmrptr->itmr);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ __raw_writel(TXx9_TMITMR_TIIE, &tmrptr->itmr);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ __raw_writel(TIMER_CCD, &tmrptr->ccdr);
+ __raw_writel(0, &tmrptr->itmr);
+ break;
+ }
+}
+
+static int txx9tmr_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ struct txx9_tmr_reg __iomem *tmrptr = txx9_tmrptr;
+
+ txx9tmr_stop_and_clear(tmrptr);
+ /* start timer */
+ __raw_writel(delta, &tmrptr->cpra);
+ __raw_writel(TCR_BASE | TXx9_TMTCR_TCE, &tmrptr->tcr);
+ return 0;
+}
+
+static struct clock_event_device txx9tmr_clock_event_device = {
+ .name = "TXx9",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .cpumask = CPU_MASK_CPU0,
+ .set_mode = txx9tmr_set_mode,
+ .set_next_event = txx9tmr_set_next_event,
+};
+
+static irqreturn_t txx9tmr_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *cd = &txx9tmr_clock_event_device;
+ struct txx9_tmr_reg __iomem *tmrptr = txx9_tmrptr;
+
+ __raw_writel(0, &tmrptr->tisr); /* ack interrupt */
+ cd->event_handler(cd);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction txx9tmr_irq = {
+ .handler = txx9tmr_interrupt,
+ .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .name = "txx9tmr",
+};
+
+void __init txx9_clockevent_init(unsigned long baseaddr, int irq,
+ unsigned int imbusclk)
+{
+ struct clock_event_device *cd = &txx9tmr_clock_event_device;
+ struct txx9_tmr_reg __iomem *tmrptr;
+
+ tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
+ txx9tmr_stop_and_clear(tmrptr);
+ __raw_writel(TIMER_CCD, &tmrptr->ccdr);
+ __raw_writel(0, &tmrptr->itmr);
+ txx9_tmrptr = tmrptr;
+
+ clockevent_set_clock(cd, TIMER_CLK(imbusclk));
+ cd->max_delta_ns =
+ clockevent_delta2ns(0xffffffff >> (32 - TXX9_TIMER_BITS), cd);
+ cd->min_delta_ns = clockevent_delta2ns(0xf, cd);
+ cd->irq = irq;
+ clockevents_register_device(cd);
+ setup_irq(irq, &txx9tmr_irq);
+ printk(KERN_INFO "TXx9: clockevent device at 0x%lx, irq %d\n",
+ baseaddr, irq);
+}
+
+void __init txx9_tmr_init(unsigned long baseaddr)
+{
+ struct txx9_tmr_reg __iomem *tmrptr;
+
+ tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
+ __raw_writel(TXx9_TMTCR_CRE, &tmrptr->tcr);
+ __raw_writel(0, &tmrptr->tisr);
+ __raw_writel(0xffffffff, &tmrptr->cpra);
+ __raw_writel(0, &tmrptr->itmr);
+ __raw_writel(0, &tmrptr->ccdr);
+ __raw_writel(0, &tmrptr->pgmr);
+ iounmap(tmrptr);
+}
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
new file mode 100644
index 0000000..868745e
--- /dev/null
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/clocksource.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+static cycle_t bcm1480_hpt_read(void)
+{
+ return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
+}
+
+struct clocksource bcm1480_clocksource = {
+ .name = "zbbus-cycles",
+ .rating = 200,
+ .read = bcm1480_hpt_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1480_clocksource_init(void)
+{
+ struct clocksource *cs = &bcm1480_clocksource;
+ unsigned int plldiv;
+ unsigned long zbbus;
+
+ plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+ zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
+ clocksource_set_clock(cs, zbbus);
+ clocksource_register(cs);
+}
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
new file mode 100644
index 0000000..ebb16e6
--- /dev/null
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/clocksource.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/time.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+#define SB1250_HPT_NUM 3
+#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */
+
+/*
+ * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
+ * again.
+ */
+static cycle_t sb1250_hpt_read(void)
+{
+ unsigned int count;
+
+ count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
+
+ return SB1250_HPT_VALUE - count;
+}
+
+struct clocksource bcm1250_clocksource = {
+ .name = "MIPS",
+ .rating = 200,
+ .read = sb1250_hpt_read,
+ .mask = CLOCKSOURCE_MASK(23),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1250_clocksource_init(void)
+{
+ struct clocksource *cs = &bcm1250_clocksource;
+
+ /* Setup hpt using timer #3 but do not enable irq for it */
+ __raw_writeq(0,
+ IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+ R_SCD_TIMER_CFG)));
+ __raw_writeq(SB1250_HPT_VALUE,
+ IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+ R_SCD_TIMER_INIT)));
+ __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
+ R_SCD_TIMER_CFG)));
+
+ clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
+ clocksource_register(cs);
+}
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 5d9830d..c2d497c 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -12,8 +12,9 @@
#include <asm/delay.h>
#include <asm/i8253.h>
#include <asm/io.h>
+#include <asm/time.h>
-static DEFINE_SPINLOCK(i8253_lock);
+DEFINE_SPINLOCK(i8253_lock);
/*
* Initialize the PIT timer.
@@ -87,11 +88,10 @@
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = init_pit_timer,
.set_next_event = pit_next_event,
- .shift = 32,
.irq = 0,
};
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
pit_clockevent.event_handler(&pit_clockevent);
@@ -111,19 +111,20 @@
*/
void __init setup_pit_timer(void)
{
+ struct clock_event_device *cd = &pit_clockevent;
+ unsigned int cpu = smp_processor_id();
+
/*
* Start pit with the boot cpu mask and make it global after the
* IO_APIC has been initialized.
*/
- pit_clockevent.cpumask = cpumask_of_cpu(0);
- pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, 32);
- pit_clockevent.max_delta_ns =
- clockevent_delta2ns(0x7FFF, &pit_clockevent);
- pit_clockevent.min_delta_ns =
- clockevent_delta2ns(0xF, &pit_clockevent);
- clockevents_register_device(&pit_clockevent);
+ cd->cpumask = cpumask_of_cpu(cpu);
+ clockevent_set_clock(cd, CLOCK_TICK_RATE);
+ cd->max_delta_ns = clockevent_delta2ns(0x7FFF, cd);
+ cd->min_delta_ns = clockevent_delta2ns(0xF, cd);
+ clockevents_register_device(cd);
- irq0.mask = cpumask_of_cpu(0);
+ irq0.mask = cpumask_of_cpu(cpu);
setup_irq(0, &irq0);
}
diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c
index a0a9105..33506ff 100644
--- a/arch/mips/kernel/irixsig.c
+++ b/arch/mips/kernel/irixsig.c
@@ -24,8 +24,12 @@
#define _BLOCKABLE (~(_S(SIGKILL) | _S(SIGSTOP)))
+#define _IRIX_NSIG 128
+#define _IRIX_NSIG_BPW BITS_PER_LONG
+#define _IRIX_NSIG_WORDS (_IRIX_NSIG / _IRIX_NSIG_BPW)
+
typedef struct {
- unsigned long sig[4];
+ unsigned long sig[_IRIX_NSIG_WORDS];
} irix_sigset_t;
struct sigctx_irix5 {
@@ -527,7 +531,7 @@
expire = schedule_timeout_interruptible(expire);
- for (i=0; i<=4; i++)
+ for (i=0; i < _IRIX_NSIG_WORDS; i++)
tmp |= (current->pending.signal.sig[i] & kset.sig[i]);
if (tmp)
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 999f785..35234b9 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -65,13 +65,13 @@
regs = task_pt_regs(child);
for (i = 0; i < 32; i++)
- __put_user(regs->regs[i], data + i);
- __put_user(regs->lo, data + EF_LO - EF_R0);
- __put_user(regs->hi, data + EF_HI - EF_R0);
- __put_user(regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
- __put_user(regs->cp0_badvaddr, data + EF_CP0_BADVADDR - EF_R0);
- __put_user(regs->cp0_status, data + EF_CP0_STATUS - EF_R0);
- __put_user(regs->cp0_cause, data + EF_CP0_CAUSE - EF_R0);
+ __put_user((long)regs->regs[i], data + i);
+ __put_user((long)regs->lo, data + EF_LO - EF_R0);
+ __put_user((long)regs->hi, data + EF_HI - EF_R0);
+ __put_user((long)regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
+ __put_user((long)regs->cp0_badvaddr, data + EF_CP0_BADVADDR - EF_R0);
+ __put_user((long)regs->cp0_status, data + EF_CP0_STATUS - EF_R0);
+ __put_user((long)regs->cp0_cause, data + EF_CP0_CAUSE - EF_R0);
return 0;
}
@@ -390,11 +390,11 @@
}
case PTRACE_GETREGS:
- ret = ptrace_getregs(child, (__u64 __user *) data);
+ ret = ptrace_getregs(child, (__s64 __user *) data);
break;
case PTRACE_SETREGS:
- ret = ptrace_setregs(child, (__u64 __user *) data);
+ ret = ptrace_setregs(child, (__s64 __user *) data);
break;
case PTRACE_GETFPREGS:
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index f2bffed..76818be 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -346,11 +346,11 @@
}
case PTRACE_GETREGS:
- ret = ptrace_getregs(child, (__u64 __user *) (__u64) data);
+ ret = ptrace_getregs(child, (__s64 __user *) (__u64) data);
break;
case PTRACE_SETREGS:
- ret = ptrace_setregs(child, (__u64 __user *) (__u64) data);
+ ret = ptrace_setregs(child, (__s64 __user *) (__u64) data);
break;
case PTRACE_GETFPREGS:
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index a8c1a69..9c92d42 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -88,11 +88,19 @@
/* Boot command line configuration overrides */
+static int vpe0limit;
static int ipibuffers = 0;
static int nostlb = 0;
static int asidmask = 0;
unsigned long smtc_asid_mask = 0xff;
+static int __init vpe0tcs(char *str)
+{
+ get_option(&str, &vpe0limit);
+
+ return 1;
+}
+
static int __init ipibufs(char *str)
{
get_option(&str, &ipibuffers);
@@ -125,6 +133,7 @@
return 1;
}
+__setup("vpe0tcs=", vpe0tcs);
__setup("ipibufs=", ipibufs);
__setup("nostlb", stlb_disable);
__setup("asidmask=", asidmask_set);
@@ -340,7 +349,7 @@
void mipsmt_prepare_cpus(void)
{
- int i, vpe, tc, ntc, nvpe, tcpervpe, slop, cpu;
+ int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu;
unsigned long flags;
unsigned long val;
int nipi;
@@ -401,8 +410,39 @@
ntc = NR_CPUS;
if (tclimit > 0 && ntc > tclimit)
ntc = tclimit;
- tcpervpe = ntc / nvpe;
- slop = ntc % nvpe; /* Residual TCs, < NVPE */
+ slop = ntc % nvpe;
+ for (i = 0; i < nvpe; i++) {
+ tcpervpe[i] = ntc / nvpe;
+ if (slop) {
+ if((slop - i) > 0) tcpervpe[i]++;
+ }
+ }
+ /* Handle command line override for VPE0 */
+ if (vpe0limit > ntc) vpe0limit = ntc;
+ if (vpe0limit > 0) {
+ int slopslop;
+ if (vpe0limit < tcpervpe[0]) {
+ /* Reducing TC count - distribute to others */
+ slop = tcpervpe[0] - vpe0limit;
+ slopslop = slop % (nvpe - 1);
+ tcpervpe[0] = vpe0limit;
+ for (i = 1; i < nvpe; i++) {
+ tcpervpe[i] += slop / (nvpe - 1);
+ if(slopslop && ((slopslop - (i - 1) > 0)))
+ tcpervpe[i]++;
+ }
+ } else if (vpe0limit > tcpervpe[0]) {
+ /* Increasing TC count - steal from others */
+ slop = vpe0limit - tcpervpe[0];
+ slopslop = slop % (nvpe - 1);
+ tcpervpe[0] = vpe0limit;
+ for (i = 1; i < nvpe; i++) {
+ tcpervpe[i] -= slop / (nvpe - 1);
+ if(slopslop && ((slopslop - (i - 1) > 0)))
+ tcpervpe[i]--;
+ }
+ }
+ }
/* Set up shared TLB */
smtc_configure_tlb();
@@ -416,7 +456,7 @@
if (vpe != 0)
printk(", ");
printk("VPE %d: TC", vpe);
- for (i = 0; i < tcpervpe; i++) {
+ for (i = 0; i < tcpervpe[vpe]; i++) {
/*
* TC 0 is bound to VPE 0 at reset,
* and is presumably executing this
@@ -429,15 +469,6 @@
printk(" %d", tc);
tc++;
}
- if (slop) {
- if (tc != 0) {
- smtc_tc_setup(vpe, tc, cpu);
- cpu++;
- }
- printk(" %d", tc);
- tc++;
- slop--;
- }
if (vpe != 0) {
/*
* Clear any stale software interrupts from VPE's Cause
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index b95fe93..af1bdc8 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -73,7 +73,14 @@
task_size = STACK_TOP;
+ if (len > task_size)
+ return -ENOMEM;
+
if (flags & MAP_FIXED) {
+ /* Even MAP_FIXED mappings must reside within task_size. */
+ if (task_size - len < addr)
+ return -EINVAL;
+
/*
* We do not accept a shared mapping if it would violate
* cache aliasing constraints.
@@ -83,8 +90,6 @@
return addr;
}
- if (len > task_size)
- return -ENOMEM;
do_color_align = 0;
if (filp || (flags & MAP_SHARED))
do_color_align = 1;
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 6c6849a..3284b9b 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -3,42 +3,31 @@
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
* Copyright (c) 2003, 2004 Maciej W. Rozycki
*
- * Common time service routines for MIPS machines. See
- * Documentation/mips/time.README.
+ * Common time service routines for MIPS machines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
+#include <linux/bug.h>
#include <linux/clockchips.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/param.h>
-#include <linux/profile.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/smp.h>
-#include <linux/kernel_stat.h>
#include <linux/spinlock.h>
-#include <linux/interrupt.h>
#include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <asm/bootinfo.h>
-#include <asm/cache.h>
-#include <asm/compiler.h>
-#include <asm/cpu.h>
#include <asm/cpu-features.h>
#include <asm/div64.h>
-#include <asm/sections.h>
#include <asm/smtc_ipi.h>
#include <asm/time.h>
-#include <irq.h>
-
/*
* forward reference
*/
@@ -62,14 +51,6 @@
}
/*
- * Null high precision timer functions for systems lacking one.
- */
-static cycle_t null_hpt_read(void)
-{
- return 0;
-}
-
-/*
* High precision timer functions for a R4k-compatible timer.
*/
static cycle_t c0_hpt_read(void)
@@ -79,22 +60,6 @@
int (*mips_timer_state)(void);
-/*
- * local_timer_interrupt() does profiling and process accounting
- * on a per-CPU basis.
- *
- * In UP mode, it is invoked from the (global) timer_interrupt.
- *
- * In SMP mode, it might invoked by per-CPU timer interrupt, or
- * a broadcasted inter-processor interrupt which itself is triggered
- * by the global timer interrupt.
- */
-void local_timer_interrupt(int irq, void *dev_id)
-{
- profile_tick(CPU_PROFILING);
- update_process_times(user_mode(get_irq_regs()));
-}
-
int null_perf_irq(void)
{
return 0;
@@ -115,14 +80,17 @@
* (only needed if you intended to use cpu counter as timer interrupt
* source)
* 2) calculate a couple of cached variables for later usage
- * 3) plat_timer_setup() -
- * a) (optional) over-write any choices made above by time_init().
- * b) machine specific code should setup the timer irqaction.
- * c) enable the timer interrupt
*/
unsigned int mips_hpt_frequency;
+static struct clocksource clocksource_mips = {
+ .name = "MIPS",
+ .read = c0_hpt_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
static unsigned int __init calibrate_hpt(void)
{
cycle_t frequency, hpt_start, hpt_end, hpt_count, hz;
@@ -165,12 +133,6 @@
return frequency >> log_2_loops;
}
-struct clocksource clocksource_mips = {
- .name = "MIPS",
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
{
u64 temp;
@@ -206,9 +168,6 @@
static void __init init_mips_clocksource(void)
{
- if (!mips_hpt_frequency || clocksource_mips.read == null_hpt_read)
- return;
-
/* Calclate a somewhat reasonable rating value */
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
@@ -221,29 +180,26 @@
{
}
-void __init __weak plat_timer_setup(struct irqaction *irq)
+/*
+ * This function exists in order to cause an error due to a duplicate
+ * definition if platform code should have its own implementation. The hook
+ * to use instead is plat_time_init. plat_time_init does not receive the
+ * irqaction pointer argument anymore. This is because any function which
+ * initializes an interrupt timer now takes care of its own request_irq rsp.
+ * setup_irq calls and each clock_event_device should use its own
+ * struct irqrequest.
+ */
+void __init plat_timer_setup(void)
{
+ BUG();
}
void __init time_init(void)
{
plat_time_init();
- /* Choose appropriate high precision timer routines. */
- if (!cpu_has_counter && !clocksource_mips.read)
- /* No high precision timer -- sorry. */
- clocksource_mips.read = null_hpt_read;
- else if (!mips_hpt_frequency && !mips_timer_state) {
- /* A high precision timer of unknown frequency. */
- if (!clocksource_mips.read)
- /* No external high precision timer -- use R4k. */
- clocksource_mips.read = c0_hpt_read;
- } else {
+ if (cpu_has_counter && (mips_hpt_frequency || mips_timer_state)) {
/* We know counter frequency. Or we can get it. */
- if (!clocksource_mips.read) {
- /* No external high precision timer -- use R4k. */
- clocksource_mips.read = c0_hpt_read;
- }
if (!mips_hpt_frequency)
mips_hpt_frequency = calibrate_hpt();
@@ -251,8 +207,8 @@
printk("Using %u.%03u MHz high precision timer.\n",
((mips_hpt_frequency + 500) / 1000) / 1000,
((mips_hpt_frequency + 500) / 1000) % 1000);
+ init_mips_clocksource();
}
- init_mips_clocksource();
mips_clockevent_init();
}
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 2781cff..5fc2398 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -63,21 +63,23 @@
/* writeable */
.data : { /* Data */
- . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */
- /*
- * This ALIGN is needed as a workaround for a bug a gcc bug upto 4.1 which
- * limits the maximum alignment to at most 32kB and results in the following
- * warning:
- *
- * CC arch/mips/kernel/init_task.o
- * arch/mips/kernel/init_task.c:30: warning: alignment of ‘init_thread_union’
- * is greater than maximum object file alignment. Using 32768
- */
- . = ALIGN(_PAGE_SIZE);
- *(.data.init_task)
+ . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */
+ /*
+ * This ALIGN is needed as a workaround for a bug a
+ * gcc bug upto 4.1 which limits the maximum alignment
+ * to at most 32kB and results in the following
+ * warning:
+ *
+ * CC arch/mips/kernel/init_task.o
+ * arch/mips/kernel/init_task.c:30: warning: alignment
+ * of ‘init_thread_union’ is greater than maximum
+ * object file alignment. Using 32768
+ */
+ . = ALIGN(_PAGE_SIZE);
+ *(.data.init_task)
- DATA_DATA
- CONSTRUCTORS
+ DATA_DATA
+ CONSTRUCTORS
}
_gp = . + 0x8000;
.lit8 : {
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index df8cbe4..436a64f 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -942,8 +942,8 @@
if (phdr->p_type != PT_LOAD)
continue;
- memcpy((void *)phdr->p_vaddr, (char *)hdr + phdr->p_offset, phdr->p_filesz);
- memset((void *)phdr->p_vaddr + phdr->p_filesz, 0, phdr->p_memsz - phdr->p_filesz);
+ memcpy((void *)phdr->p_paddr, (char *)hdr + phdr->p_offset, phdr->p_filesz);
+ memset((void *)phdr->p_paddr + phdr->p_filesz, 0, phdr->p_memsz - phdr->p_filesz);
phdr++;
}
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index 54827d0..e072da4 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -117,14 +117,11 @@
}
};
-void plat_time_init(void)
+void __init plat_time_init(void)
{
mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2;
-}
-void __init plat_timer_setup(struct irqaction *irq)
-{
- change_c0_status(ST0_IM, IE_IRQ0 | IE_IRQ5);
+ change_c0_status(ST0_IM, IE_IRQ0);
}
void __init plat_mem_setup(void)
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 9d6243a..f02ce63 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -127,26 +127,6 @@
return mc146818_get_cmos_time();
}
-void __init plat_time_init(void)
-{
- unsigned int est_freq;
-
- /* Set Data mode - binary. */
- CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
-
- est_freq = estimate_cpu_frequency();
-
- printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
- (est_freq%1000000)*100/1000000);
-
- cpu_khz = est_freq / 1000;
-
- mips_scroll_message();
-#ifdef CONFIG_I8253 /* Only Malta has a PIT */
- setup_pit_timer();
-#endif
-}
-
void __init plat_perf_setup(void)
{
cp0_perfcount_irq = -1;
@@ -166,14 +146,13 @@
}
}
-void __init plat_timer_setup(struct irqaction *irq)
+unsigned int __init get_c0_compare_int(void)
{
#ifdef MSC01E_INT_BASE
if (cpu_has_veic) {
set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
- }
- else
+ } else
#endif
{
if (cpu_has_vint)
@@ -181,13 +160,26 @@
mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
}
-#ifdef CONFIG_MIPS_MT_SMTC
- setup_irq_smtc(mips_cpu_timer_irq, irq, 0x100 << cp0_compare_irq);
-#else
- setup_irq(mips_cpu_timer_irq, irq);
-#endif /* CONFIG_MIPS_MT_SMTC */
-#ifdef CONFIG_SMP
- set_irq_handler(mips_cpu_timer_irq, handle_percpu_irq);
+ return mips_cpu_timer_irq;
+}
+
+void __init plat_time_init(void)
+{
+ unsigned int est_freq;
+
+ /* Set Data mode - binary. */
+ CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
+
+ est_freq = estimate_cpu_frequency();
+
+ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
+ (est_freq%1000000)*100/1000000);
+
+ cpu_khz = est_freq / 1000;
+
+ mips_scroll_message();
+#ifdef CONFIG_I8253 /* Only Malta has a PIT */
+ setup_pit_timer();
#endif
plat_perf_setup();
diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c
index e7fa0d1..bfaafa3 100644
--- a/arch/mips/mipssim/sim_time.c
+++ b/arch/mips/mipssim/sim_time.c
@@ -75,6 +75,30 @@
return count;
}
+static int mips_cpu_timer_irq;
+
+static void mips_timer_dispatch(void)
+{
+ do_IRQ(mips_cpu_timer_irq);
+}
+
+
+unsigned __init get_c0_compare_int(void)
+{
+#ifdef MSC01E_INT_BASE
+ if (cpu_has_veic) {
+ set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
+ mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+ } else {
+#endif
+ if (cpu_has_vint)
+ set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
+ mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+ }
+
+ return mips_cpu_timer_irq;
+}
+
void __init plat_time_init(void)
{
unsigned int est_freq, flags;
@@ -93,35 +117,3 @@
local_irq_restore(flags);
}
-
-static int mips_cpu_timer_irq;
-
-static void mips_timer_dispatch(void)
-{
- do_IRQ(mips_cpu_timer_irq);
-}
-
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
- if (cpu_has_veic) {
- set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
- mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
- } else {
- if (cpu_has_vint)
- set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
- mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
- }
-
- /* we are using the cpu counter for timer interrupts */
- setup_irq(mips_cpu_timer_irq, irq);
-
-#ifdef CONFIG_SMP
- /* irq_desc(riptor) is a global resource, when the interrupt overlaps
- on seperate cpu's the first one tries to handle the second interrupt.
- The effect is that the int remains disabled on the second cpu.
- Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
- irq_desc[mips_cpu_timer_irq].flags |= IRQ_PER_CPU;
- set_irq_handler(mips_cpu_timer_irq, handle_percpu_irq);
-#endif
-}
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index c55312f..562abb7 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -7,7 +7,7 @@
* Tx39XX R4k style caches added. HK
* Copyright (C) 1998, 1999, 2000 Harald Koerfgen
* Copyright (C) 1998 Gleb Raiko & Vladimir Roganov
- * Copyright (C) 2001, 2004 Maciej W. Rozycki
+ * Copyright (C) 2001, 2004, 2007 Maciej W. Rozycki
*/
#include <linux/init.h>
#include <linux/kernel.h>
@@ -26,8 +26,6 @@
static unsigned long icache_size, dcache_size; /* Size in bytes */
static unsigned long icache_lsize, dcache_lsize; /* Size in bytes */
-#undef DEBUG_CACHE
-
unsigned long __init r3k_cache_size(unsigned long ca_flags)
{
unsigned long flags, status, dummy, size;
@@ -217,26 +215,6 @@
write_c0_status(flags);
}
-static inline unsigned long get_phys_page(unsigned long addr,
- struct mm_struct *mm)
-{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *pte;
- unsigned long physpage;
-
- pgd = pgd_offset(mm, addr);
- pud = pud_offset(pgd, addr);
- pmd = pmd_offset(pud, addr);
- pte = pte_offset(pmd, addr);
-
- if ((physpage = pte_val(*pte)) & _PAGE_VALID)
- return KSEG0ADDR(physpage & PAGE_MASK);
-
- return 0;
-}
-
static inline void r3k_flush_cache_all(void)
{
}
@@ -252,12 +230,40 @@
}
static void r3k_flush_cache_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
+ unsigned long start, unsigned long end)
{
}
-static void r3k_flush_cache_page(struct vm_area_struct *vma, unsigned long page, unsigned long pfn)
+static void r3k_flush_cache_page(struct vm_area_struct *vma,
+ unsigned long addr, unsigned long pfn)
{
+ unsigned long kaddr = KSEG0ADDR(pfn << PAGE_SHIFT);
+ int exec = vma->vm_flags & VM_EXEC;
+ struct mm_struct *mm = vma->vm_mm;
+ pgd_t *pgdp;
+ pud_t *pudp;
+ pmd_t *pmdp;
+ pte_t *ptep;
+
+ pr_debug("cpage[%08lx,%08lx]\n",
+ cpu_context(smp_processor_id(), mm), addr);
+
+ /* No ASID => no such page in the cache. */
+ if (cpu_context(smp_processor_id(), mm) == 0)
+ return;
+
+ pgdp = pgd_offset(mm, addr);
+ pudp = pud_offset(pgdp, addr);
+ pmdp = pmd_offset(pudp, addr);
+ ptep = pte_offset(pmdp, addr);
+
+ /* Invalid => no such page in the cache. */
+ if (!(pte_val(*ptep) & _PAGE_PRESENT))
+ return;
+
+ r3k_flush_dcache_range(kaddr, kaddr + PAGE_SIZE);
+ if (exec)
+ r3k_flush_icache_range(kaddr, kaddr + PAGE_SIZE);
}
static void local_r3k_flush_data_cache_page(void *addr)
@@ -272,9 +278,7 @@
{
unsigned long flags;
-#ifdef DEBUG_CACHE
- printk("csigtramp[%08lx]", addr);
-#endif
+ pr_debug("csigtramp[%08lx]\n", addr);
flags = read_c0_status();
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index d708833..6806d58 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -345,11 +345,26 @@
r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
}
+static inline int has_valid_asid(const struct mm_struct *mm)
+{
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+ int i;
+
+ for_each_online_cpu(i)
+ if (cpu_context(i, mm))
+ return 1;
+
+ return 0;
+#else
+ return cpu_context(smp_processor_id(), mm);
+#endif
+}
+
static inline void local_r4k_flush_cache_range(void * args)
{
struct vm_area_struct *vma = args;
- if (!(cpu_context(smp_processor_id(), vma->vm_mm)))
+ if (!(has_valid_asid(vma->vm_mm)))
return;
r4k_blast_dcache();
@@ -368,7 +383,7 @@
{
struct mm_struct *mm = args;
- if (!cpu_context(smp_processor_id(), mm))
+ if (!has_valid_asid(mm))
return;
/*
@@ -420,7 +435,7 @@
* If ownes no valid ASID yet, cannot possibly have gotten
* this page into the cache.
*/
- if (cpu_context(smp_processor_id(), mm) == 0)
+ if (!has_valid_asid(mm))
return;
addr &= PAGE_MASK;
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index b1b4052..33519ce 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -12,8 +12,8 @@
#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/module.h>
-#include <linux/string.h>
#include <linux/scatterlist.h>
+#include <linux/string.h>
#include <asm/cache.h>
#include <asm/io.h>
diff --git a/arch/mips/pci/fixup-pmcmsp.c b/arch/mips/pci/fixup-pmcmsp.c
index 0026121..65735b1 100644
--- a/arch/mips/pci/fixup-pmcmsp.c
+++ b/arch/mips/pci/fixup-pmcmsp.c
@@ -202,7 +202,7 @@
* RETURNS: IRQ number
*
****************************************************************************/
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
#if !defined(CONFIG_PMC_MSP7120_GW) && !defined(CONFIG_PMC_MSP7120_EVAL)
printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n");
diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c
index 720a2b7..ed87733 100644
--- a/arch/mips/pci/fixup-tb0219.c
+++ b/arch/mips/pci/fixup-tb0219.c
@@ -2,7 +2,7 @@
* fixup-tb0219.c, The TANBAC TB0219 specific PCI fixups.
*
* Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp>
- * Copyright (C) 2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 059eade..109c95c 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -404,7 +404,7 @@
if (pciirqflag == 0) {
request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
bpci_interrupt,
- SA_SHIRQ | SA_INTERRUPT,
+ IRQF_SHARED | IRQF_DISABLED,
"PMC MSP PCI Host",
preg);
pciirqflag = ~0;
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
index 15e7b80..9de3430 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -122,7 +122,7 @@
up.uartclk = uartclk;
up.regshift = 2;
up.iotype = UPIO_DWAPB; /* UPIO_MEM like */
- up.flags = STD_COM_FLAGS;
+ up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
up.type = PORT_16550A;
up.line = 0;
up.private_data = (void*)UART0_STATUS_REG;
diff --git a/arch/mips/qemu/q-irq.c b/arch/mips/qemu/q-irq.c
index 4681757..11f9847 100644
--- a/arch/mips/qemu/q-irq.c
+++ b/arch/mips/qemu/q-irq.c
@@ -1,4 +1,5 @@
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/linkage.h>
#include <asm/i8259.h>
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index f5dccf0..08d4536 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -131,12 +131,12 @@
static int rt_next_event(unsigned long delta, struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
- int slice = cputoslice(cpu) == 0;
+ int slice = cputoslice(cpu);
unsigned long cnt;
cnt = LOCAL_HUB_L(PI_RT_COUNT);
cnt += delta;
- LOCAL_HUB_S(slice ? PI_RT_COMPARE_A : PI_RT_COMPARE_B, cnt);
+ LOCAL_HUB_S(PI_RT_COMPARE_A + PI_COUNT_OFFSET * slice, cnt);
return LOCAL_HUB_L(PI_RT_COUNT) >= cnt ? -ETIME : 0;
}
@@ -164,9 +164,12 @@
{
struct clock_event_device *cd = dev_id;
unsigned int cpu = smp_processor_id();
- int slice = cputoslice(cpu) == 0;
+ int slice = cputoslice(cpu);
- LOCAL_HUB_S(slice ? PI_RT_PEND_A : PI_RT_PEND_B, 0); /* Ack */
+ /*
+ * Ack
+ */
+ LOCAL_HUB_S(PI_RT_PEND_A + PI_COUNT_OFFSET * slice, 0);
cd->event_handler(cd);
return IRQ_HANDLED;
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index 7e8094f..aab17dd 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -40,13 +40,6 @@
mace->perif.ctrl.misc;
}
-#undef DEBUG_IRQ
-#ifdef DEBUG_IRQ
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
/*
* O2 irq map
*
@@ -125,6 +118,7 @@
.mask = CPU_MASK_NONE,
.name = "CRIME memory error",
};
+
struct irqaction cpuerr_irq = {
.handler = crime_cpuerr_intr,
.flags = IRQF_DISABLED,
@@ -139,46 +133,70 @@
static uint64_t crime_mask;
-static void enable_crime_irq(unsigned int irq)
+static inline void crime_enable_irq(unsigned int irq)
{
- crime_mask |= 1 << (irq - 1);
+ unsigned int bit = irq - CRIME_IRQ_BASE;
+
+ crime_mask |= 1 << bit;
crime->imask = crime_mask;
}
-static void disable_crime_irq(unsigned int irq)
+static inline void crime_disable_irq(unsigned int irq)
{
- crime_mask &= ~(1 << (irq - 1));
+ unsigned int bit = irq - CRIME_IRQ_BASE;
+
+ crime_mask &= ~(1 << bit);
crime->imask = crime_mask;
flush_crime_bus();
}
-static void mask_and_ack_crime_irq(unsigned int irq)
+static void crime_level_mask_and_ack_irq(unsigned int irq)
{
- /* Edge triggered interrupts must be cleared. */
- if ((irq >= CRIME_GBE0_IRQ && irq <= CRIME_GBE3_IRQ)
- || (irq >= CRIME_RE_EMPTY_E_IRQ && irq <= CRIME_RE_IDLE_E_IRQ)
- || (irq >= CRIME_SOFT0_IRQ && irq <= CRIME_SOFT2_IRQ)) {
- uint64_t crime_int;
- crime_int = crime->hard_int;
- crime_int &= ~(1 << (irq - 1));
- crime->hard_int = crime_int;
- }
- disable_crime_irq(irq);
+ crime_disable_irq(irq);
}
-static void end_crime_irq(unsigned int irq)
+static void crime_level_end_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- enable_crime_irq(irq);
+ crime_enable_irq(irq);
}
-static struct irq_chip ip32_crime_interrupt = {
- .name = "IP32 CRIME",
- .ack = mask_and_ack_crime_irq,
- .mask = disable_crime_irq,
- .mask_ack = mask_and_ack_crime_irq,
- .unmask = enable_crime_irq,
- .end = end_crime_irq,
+static struct irq_chip crime_level_interrupt = {
+ .name = "IP32 CRIME",
+ .ack = crime_level_mask_and_ack_irq,
+ .mask = crime_disable_irq,
+ .mask_ack = crime_level_mask_and_ack_irq,
+ .unmask = crime_enable_irq,
+ .end = crime_level_end_irq,
+};
+
+static void crime_edge_mask_and_ack_irq(unsigned int irq)
+{
+ unsigned int bit = irq - CRIME_IRQ_BASE;
+ uint64_t crime_int;
+
+ /* Edge triggered interrupts must be cleared. */
+
+ crime_int = crime->hard_int;
+ crime_int &= ~(1 << bit);
+ crime->hard_int = crime_int;
+
+ crime_disable_irq(irq);
+}
+
+static void crime_edge_end_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ crime_enable_irq(irq);
+}
+
+static struct irq_chip crime_edge_interrupt = {
+ .name = "IP32 CRIME",
+ .ack = crime_edge_mask_and_ack_irq,
+ .mask = crime_disable_irq,
+ .mask_ack = crime_edge_mask_and_ack_irq,
+ .unmask = crime_enable_irq,
+ .end = crime_edge_end_irq,
};
/*
@@ -265,7 +283,7 @@
{
unsigned int crime_int = 0;
- DBG("maceisa enable: %u\n", irq);
+ pr_debug("maceisa enable: %u\n", irq);
switch (irq) {
case MACEISA_AUDIO_SW_IRQ ... MACEISA_AUDIO3_MERR_IRQ:
@@ -278,7 +296,7 @@
crime_int = MACE_SUPERIO_INT;
break;
}
- DBG("crime_int %08x enabled\n", crime_int);
+ pr_debug("crime_int %08x enabled\n", crime_int);
crime_mask |= crime_int;
crime->imask = crime_mask;
maceisa_mask |= 1 << (irq - 33);
@@ -290,11 +308,11 @@
unsigned int crime_int = 0;
maceisa_mask &= ~(1 << (irq - 33));
- if(!(maceisa_mask & MACEISA_AUDIO_INT))
+ if (!(maceisa_mask & MACEISA_AUDIO_INT))
crime_int |= MACE_AUDIO_INT;
- if(!(maceisa_mask & MACEISA_MISC_INT))
+ if (!(maceisa_mask & MACEISA_MISC_INT))
crime_int |= MACE_MISC_INT;
- if(!(maceisa_mask & MACEISA_SUPERIO_INT))
+ if (!(maceisa_mask & MACEISA_SUPERIO_INT))
crime_int |= MACE_SUPERIO_INT;
crime_mask &= ~crime_int;
crime->imask = crime_mask;
@@ -327,12 +345,12 @@
}
static struct irq_chip ip32_maceisa_interrupt = {
- .name = "IP32 MACE ISA",
- .ack = mask_and_ack_maceisa_irq,
- .mask = disable_maceisa_irq,
- .mask_ack = mask_and_ack_maceisa_irq,
- .unmask = enable_maceisa_irq,
- .end = end_maceisa_irq,
+ .name = "IP32 MACE ISA",
+ .ack = mask_and_ack_maceisa_irq,
+ .mask = disable_maceisa_irq,
+ .mask_ack = mask_and_ack_maceisa_irq,
+ .unmask = enable_maceisa_irq,
+ .end = end_maceisa_irq,
};
/* This is used for regular non-ISA, non-PCI MACE interrupts. That means
@@ -411,7 +429,7 @@
irq = __ffs(mace_int & maceisa_mask) + MACEISA_AUDIO_SW_IRQ;
}
- DBG("*irq %u*\n", irq);
+ pr_debug("*irq %u*\n", irq);
do_IRQ(irq);
}
@@ -472,23 +490,31 @@
mips_cpu_irq_init();
for (irq = MIPS_CPU_IRQ_BASE + 8; irq <= IP32_IRQ_MAX; irq++) {
- struct irq_chip *chip;
-
switch (irq) {
case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ:
- chip = &ip32_mace_interrupt;
+ set_irq_chip(irq, &ip32_mace_interrupt);
break;
case MACEPCI_SCSI0_IRQ ... MACEPCI_SHARED2_IRQ:
- chip = &ip32_macepci_interrupt;
+ set_irq_chip(irq, &ip32_macepci_interrupt);
break;
- case CRIME_GBE0_IRQ ... CRIME_VICE_IRQ:
- chip = &ip32_crime_interrupt;
+ case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ:
+ set_irq_chip(irq, &crime_edge_interrupt);
+ break;
+ case CRIME_CPUERR_IRQ:
+ case CRIME_MEMERR_IRQ:
+ set_irq_chip(irq, &crime_level_interrupt);
+ break;
+ case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ:
+ case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ:
+ set_irq_chip(irq, &crime_edge_interrupt);
+ break;
+ case CRIME_VICE_IRQ:
+ set_irq_chip(irq, &crime_edge_interrupt);
break;
default:
- chip = &ip32_maceisa_interrupt;
+ set_irq_chip(irq, &ip32_maceisa_interrupt);
+ break;
}
-
- set_irq_chip(irq, chip);
}
setup_irq(CRIME_MEMERR_IRQ, &memerr_irq);
setup_irq(CRIME_CPUERR_IRQ, &cpuerr_irq);
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 7309e48..77febd6 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -42,7 +42,7 @@
static int __init uart8250_init(void)
{
uart8250_data[0].membase = (void __iomem *) &mace->isa.serial1;
- uart8250_data[1].membase = (void __iomem *) &mace->isa.serial1;
+ uart8250_data[1].membase = (void __iomem *) &mace->isa.serial2;
return platform_device_register(&uart8250_device);
}
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index e8fb880..366b19d 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -1,5 +1,7 @@
config SIBYTE_SB1250
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_ENABLE_LDT_IF_PCI
@@ -9,6 +11,8 @@
config SIBYTE_BCM1120
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select IRQ_CPU
select SIBYTE_BCM112X
select SIBYTE_HAS_ZBUS_PROFILING
@@ -16,6 +20,8 @@
config SIBYTE_BCM1125
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_BCM112X
@@ -24,6 +30,8 @@
config SIBYTE_BCM1125H
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_BCM112X
@@ -33,12 +41,16 @@
config SIBYTE_BCM112X
bool
+ select CEVT_SB1250
+ select CSRC_SB1250
select IRQ_CPU
select SIBYTE_SB1xxx_SOC
select SIBYTE_HAS_ZBUS_PROFILING
config SIBYTE_BCM1x80
bool
+ select CEVT_BCM1480
+ select CSRC_BCM1480
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_HAS_ZBUS_PROFILING
@@ -47,6 +59,8 @@
config SIBYTE_BCM1x55
bool
+ select CEVT_BCM1480
+ select CSRC_BCM1480
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 10299ba..e28d626 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -265,42 +265,6 @@
}
}
-
-static irqreturn_t bcm1480_dummy_handler(int irq, void *dev_id)
-{
- return IRQ_NONE;
-}
-
-static struct irqaction bcm1480_dummy_action = {
- .handler = bcm1480_dummy_handler,
- .flags = 0,
- .mask = CPU_MASK_NONE,
- .name = "bcm1480-private",
- .next = NULL,
- .dev_id = 0
-};
-
-int bcm1480_steal_irq(int irq)
-{
- struct irq_desc *desc = irq_desc + irq;
- unsigned long flags;
- int retval = 0;
-
- if (irq >= BCM1480_NR_IRQS)
- return -EINVAL;
-
- spin_lock_irqsave(&desc->lock, flags);
- /* Don't allow sharing at all for these */
- if (desc->action != NULL)
- retval = -EBUSY;
- else {
- desc->action = &bcm1480_dummy_action;
- desc->depth = 0;
- }
- spin_unlock_irqrestore(&desc->lock, flags);
- return 0;
-}
-
/*
* init_IRQ is called early in the boot sequence from init/main.c. It
* is responsible for setting up the interrupt mapper and installing the
@@ -329,7 +293,6 @@
void __init arch_init_irq(void)
{
-
unsigned int i, cpu;
u64 tmp;
unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
@@ -386,8 +349,6 @@
__raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L)));
}
- bcm1480_steal_irq(K_BCM1480_INT_MBOX_0_0);
-
/*
* Note that the timer interrupts are also mapped, but this is
* done in bcm1480_time_init(). Also, the profiling driver
@@ -411,7 +372,6 @@
/* QQQ FIXME */
__raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port));
- bcm1480_steal_irq(kgdb_irq);
__raw_writeq(IMR_IP6_VAL,
IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
(kgdb_irq<<3));
diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c
index 610f025..1680a68 100644
--- a/arch/mips/sibyte/bcm1480/time.c
+++ b/arch/mips/sibyte/bcm1480/time.c
@@ -15,166 +15,10 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/percpu.h>
-#include <linux/spinlock.h>
+#include <linux/init.h>
-#include <asm/addrspace.h>
-#include <asm/time.h>
-#include <asm/io.h>
-
-#include <asm/sibyte/bcm1480_regs.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/bcm1480_int.h>
-#include <asm/sibyte/bcm1480_scd.h>
-
-#include <asm/sibyte/sb1250.h>
-
-
-#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
-#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
-#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
-
-extern int bcm1480_steal_irq(int irq);
-
-/*
- * The general purpose timer ticks at 1MHz independent if
- * the rest of the system
- */
-static void sibyte_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *timer_cfg, *timer_init;
-
- timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- __raw_writeq(0, timer_cfg);
- __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
- __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- timer_cfg);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- /* Stop the timer until we actually program a shot */
- case CLOCK_EVT_MODE_SHUTDOWN:
- __raw_writeq(0, timer_cfg);
- break;
-
- case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
- case CLOCK_EVT_MODE_RESUME:
- ;
- }
-}
-
-static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *timer_init;
- unsigned int cnt;
- int res;
-
- timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
- cnt = __raw_readq(timer_init);
- cnt += delta;
- __raw_writeq(cnt, timer_init);
- res = ((long)(__raw_readq(timer_init) - cnt ) > 0) ? -ETIME : 0;
-
- return res;
-}
-
-static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *cd = dev_id;
- void __iomem *timer_cfg;
-
- timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-
- /* Reset the timer */
- __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- timer_cfg);
- cd->event_handler(cd);
-
- return IRQ_HANDLED;
-}
-
-static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
-static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
-static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
-
-void __cpuinit sb1480_clockevent_init(void)
-{
- unsigned int cpu = smp_processor_id();
- unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
- struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
- struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
- unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
-
- BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
-
- sprintf(name, "bcm1480-counter %d", cpu);
- cd->name = name;
- cd->features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_MODE_ONESHOT;
- clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
- cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
- cd->min_delta_ns = clockevent_delta2ns(1, cd);
- cd->rating = 200;
- cd->irq = irq;
- cd->cpumask = cpumask_of_cpu(cpu);
- cd->set_next_event = sibyte_next_event;
- cd->set_mode = sibyte_set_mode;
- clockevents_register_device(cd);
-
- bcm1480_mask_irq(cpu, irq);
-
- /*
- * Map timer interrupt to IP[4] of this cpu
- */
- __raw_writeq(IMR_IP4_VAL,
- IOADDR(A_BCM1480_IMR_REGISTER(cpu,
- R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
-
- bcm1480_unmask_irq(cpu, irq);
- bcm1480_steal_irq(irq);
-
- action->handler = sibyte_counter_handler;
- action->flags = IRQF_DISABLED | IRQF_PERCPU;
- action->name = name;
- action->dev_id = cd;
- setup_irq(irq, action);
-}
-
-static cycle_t bcm1480_hpt_read(void)
-{
- return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
-}
-
-struct clocksource bcm1480_clocksource = {
- .name = "zbbus-cycles",
- .rating = 200,
- .read = bcm1480_hpt_read,
- .mask = CLOCKSOURCE_MASK(64),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init sb1480_clocksource_init(void)
-{
- struct clocksource *cs = &bcm1480_clocksource;
- unsigned int plldiv;
- unsigned long zbbus;
-
- plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
- zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
- clocksource_set_clock(cs, zbbus);
- clocksource_register(cs);
-}
+extern void sb1480_clockevent_init(void);
+extern void sb1480_clocksource_init(void);
void __init plat_time_init(void)
{
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 53780a1..eac9065 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -236,41 +236,6 @@
}
-static irqreturn_t sb1250_dummy_handler(int irq, void *dev_id)
-{
- return IRQ_NONE;
-}
-
-static struct irqaction sb1250_dummy_action = {
- .handler = sb1250_dummy_handler,
- .flags = 0,
- .mask = CPU_MASK_NONE,
- .name = "sb1250-private",
- .next = NULL,
- .dev_id = 0
-};
-
-int sb1250_steal_irq(int irq)
-{
- struct irq_desc *desc = irq_desc + irq;
- unsigned long flags;
- int retval = 0;
-
- if (irq >= SB1250_NR_IRQS)
- return -EINVAL;
-
- spin_lock_irqsave(&desc->lock, flags);
- /* Don't allow sharing at all for these */
- if (desc->action != NULL)
- retval = -EBUSY;
- else {
- desc->action = &sb1250_dummy_action;
- desc->depth = 0;
- }
- spin_unlock_irqrestore(&desc->lock, flags);
- return 0;
-}
-
/*
* arch_init_irq is called early in the boot sequence from init/main.c via
* init_IRQ. It is responsible for setting up the interrupt mapper and
@@ -342,8 +307,6 @@
__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
- sb1250_steal_irq(K_INT_MBOX_0);
-
/*
* Note that the timer interrupts are also mapped, but this is
* done in sb1250_time_init(). Also, the profiling driver
@@ -367,7 +330,6 @@
__raw_writeq(M_DUART_IMR_BRK,
IOADDR(A_DUART_IMRREG(kgdb_port)));
- sb1250_steal_irq(kgdb_irq);
__raw_writeq(IMR_IP6_VAL,
IOADDR(A_IMR_REGISTER(0,
R_IMR_INTERRUPT_MAP_BASE) +
diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c
index a41e908..68337bf 100644
--- a/arch/mips/sibyte/sb1250/time.c
+++ b/arch/mips/sibyte/sb1250/time.c
@@ -15,198 +15,10 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include <linux/init.h>
-/*
- * These are routines to set up and handle interrupts from the
- * sb1250 general purpose timer 0. We're using the timer as a
- * system clock, so we set it up to run at 100 Hz. On every
- * interrupt, we update our idea of what the time of day is,
- * then call do_timer() in the architecture-independent kernel
- * code to do general bookkeeping (e.g. update jiffies, run
- * bottom halves, etc.)
- */
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/kernel_stat.h>
-
-#include <asm/irq.h>
-#include <asm/addrspace.h>
-#include <asm/time.h>
-#include <asm/io.h>
-
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/sibyte/sb1250_scd.h>
-
-
-#define IMR_IP2_VAL K_INT_MAP_I0
-#define IMR_IP3_VAL K_INT_MAP_I1
-#define IMR_IP4_VAL K_INT_MAP_I2
-
-#define SB1250_HPT_NUM 3
-#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */
-
-
-extern int sb1250_steal_irq(int irq);
-
-/*
- * The general purpose timer ticks at 1 Mhz independent if
- * the rest of the system
- */
-static void sibyte_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *timer_cfg, *timer_init;
-
- timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
- switch(mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- __raw_writeq(0, timer_cfg);
- __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
- __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- timer_cfg);
- break;
-
- case CLOCK_EVT_MODE_ONESHOT:
- /* Stop the timer until we actually program a shot */
- case CLOCK_EVT_MODE_SHUTDOWN:
- __raw_writeq(0, timer_cfg);
- break;
-
- case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
- case CLOCK_EVT_MODE_RESUME:
- ;
- }
-}
-
-static int
-sibyte_next_event(unsigned long delta, struct clock_event_device *evt)
-{
- unsigned int cpu = smp_processor_id();
- void __iomem *timer_cfg, *timer_init;
-
- timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
- timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
- __raw_writeq(0, timer_cfg);
- __raw_writeq(delta, timer_init);
- __raw_writeq(M_SCD_TIMER_ENABLE, timer_cfg);
-
- return 0;
-}
-
-static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *cd = dev_id;
-
- /* ACK interrupt */
- ____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
-
- cd->event_handler(cd);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction sibyte_irqaction = {
- .handler = sibyte_counter_handler,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
- .name = "timer",
-};
-
-static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
-static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
-static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
-
-void __cpuinit sb1250_clockevent_init(void)
-{
- unsigned int cpu = smp_processor_id();
- unsigned int irq = K_INT_TIMER_0 + cpu;
- struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
- struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
- unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
-
- /* Only have 4 general purpose timers, and we use last one as hpt */
- BUG_ON(cpu > 2);
-
- sprintf(name, "bcm1480-counter %d", cpu);
- cd->name = name;
- cd->features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_MODE_ONESHOT;
- clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
- cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
- cd->min_delta_ns = clockevent_delta2ns(1, cd);
- cd->rating = 200;
- cd->irq = irq;
- cd->cpumask = cpumask_of_cpu(cpu);
- cd->set_next_event = sibyte_next_event;
- cd->set_mode = sibyte_set_mode;
- clockevents_register_device(cd);
-
- sb1250_mask_irq(cpu, irq);
-
- /* Map the timer interrupt to ip[4] of this cpu */
- __raw_writeq(IMR_IP4_VAL,
- IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
- (irq << 3)));
- cd->cpumask = cpumask_of_cpu(0);
-
- sb1250_unmask_irq(cpu, irq);
- sb1250_steal_irq(irq);
-
- action->handler = sibyte_counter_handler;
- action->flags = IRQF_DISABLED | IRQF_PERCPU;
- action->name = name;
- action->dev_id = cd;
- setup_irq(irq, &sibyte_irqaction);
-}
-
-/*
- * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
- * again.
- */
-static cycle_t sb1250_hpt_read(void)
-{
- unsigned int count;
-
- count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
-
- return SB1250_HPT_VALUE - count;
-}
-
-struct clocksource bcm1250_clocksource = {
- .name = "MIPS",
- .rating = 200,
- .read = sb1250_hpt_read,
- .mask = CLOCKSOURCE_MASK(23),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init sb1250_clocksource_init(void)
-{
- struct clocksource *cs = &bcm1250_clocksource;
-
- /* Setup hpt using timer #3 but do not enable irq for it */
- __raw_writeq(0,
- IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
- R_SCD_TIMER_CFG)));
- __raw_writeq(SB1250_HPT_VALUE,
- IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
- R_SCD_TIMER_INIT)));
- __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
- IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
- R_SCD_TIMER_CFG)));
-
- clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
- clocksource_register(cs);
-}
+extern void sb1250_clocksource_init(void);
+extern void sb1250_clockevent_init(void);
void __init plat_time_init(void)
{
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index 0910b35..6f339af 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -1,6 +1,7 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/time.h>
+#include <linux/clockchips.h>
#include <asm/i8253.h>
#include <asm/sni.h>
@@ -11,27 +12,78 @@
#define SNI_COUNTER2_DIV 64
#define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
-static void sni_a20r_timer_ack(void)
+static void a20r_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
{
- *(volatile u8 *)A20R_PT_TIM0_ACK = 0x0; wmb();
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34;
+ wmb();
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
+ wmb();
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV >> 8;
+ wmb();
+
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4;
+ wmb();
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV;
+ wmb();
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8;
+ wmb();
+
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
}
+static struct clock_event_device a20r_clockevent_device = {
+ .name = "a20r-timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+
+ /* .mult, .shift, .max_delta_ns and .min_delta_ns left uninitialized */
+
+ .rating = 300,
+ .irq = SNI_A20R_IRQ_TIMER,
+ .set_mode = a20r_set_mode,
+};
+
+static irqreturn_t a20r_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *cd = dev_id;
+
+ *(volatile u8 *)A20R_PT_TIM0_ACK = 0;
+ wmb();
+
+ cd->event_handler(cd);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction a20r_irqaction = {
+ .handler = a20r_interrupt,
+ .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .name = "a20r-timer",
+};
+
/*
* a20r platform uses 2 counters to divide the input frequency.
* Counter 2 output is connected to Counter 0 & 1 input.
*/
-static void __init sni_a20r_timer_setup(struct irqaction *irq)
+static void __init sni_a20r_timer_setup(void)
{
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34; wmb();
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = (SNI_COUNTER0_DIV) & 0xff; wmb();
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = (SNI_COUNTER0_DIV >> 8) & 0xff; wmb();
+ struct clock_event_device *cd = &a20r_clockevent_device;
+ struct irqaction *action = &a20r_irqaction;
+ unsigned int cpu = smp_processor_id();
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4; wmb();
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = (SNI_COUNTER2_DIV) & 0xff; wmb();
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = (SNI_COUNTER2_DIV >> 8) & 0xff; wmb();
-
- setup_irq(SNI_A20R_IRQ_TIMER, irq);
- mips_timer_ack = sni_a20r_timer_ack;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ clockevents_register_device(cd);
+ action->dev_id = cd;
+ setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction);
}
#define SNI_8254_TICK_RATE 1193182UL
@@ -118,18 +170,13 @@
mips_hpt_frequency = r4k_tick * HZ;
- setup_pit_timer();
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
switch (sni_brd_type) {
case SNI_BRD_10:
case SNI_BRD_10NEW:
case SNI_BRD_TOWER_OASIC:
case SNI_BRD_MINITOWER:
- sni_a20r_timer_setup(irq);
- break;
+ sni_a20r_timer_setup();
+ break;
}
}
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index c7470fb..0299595 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -63,6 +63,7 @@
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/time.h>
+#include <asm/txx9tmr.h>
#include <linux/bootmem.h>
#include <linux/blkdev.h>
#ifdef CONFIG_TOSHIBA_FPCIB0
@@ -93,7 +94,6 @@
#define TOSHIBA_RBTX4927_SETUP_EFWFU ( 1 << 3 )
#define TOSHIBA_RBTX4927_SETUP_SETUP ( 1 << 4 )
-#define TOSHIBA_RBTX4927_SETUP_TIME_INIT ( 1 << 5 )
#define TOSHIBA_RBTX4927_SETUP_PCIBIOS ( 1 << 7 )
#define TOSHIBA_RBTX4927_SETUP_PCI1 ( 1 << 8 )
#define TOSHIBA_RBTX4927_SETUP_PCI2 ( 1 << 9 )
@@ -130,7 +130,6 @@
int tx4927_using_backplane = 0;
-extern void gt64120_time_init(void);
extern void toshiba_rbtx4927_irq_setup(void);
char *prom_getcmdline(void);
@@ -721,6 +720,7 @@
void __init toshiba_rbtx4927_setup(void)
{
+ int i;
u32 cp0_config;
char *argptr;
@@ -764,6 +764,9 @@
_machine_halt = toshiba_rbtx4927_halt;
pm_power_off = toshiba_rbtx4927_power_off;
+ for (i = 0; i < TX4927_NR_TMR; i++)
+ txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL);
+
#ifdef CONFIG_PCI
/* PCIC */
@@ -892,7 +895,6 @@
#ifdef CONFIG_SERIAL_TXX9
{
extern int early_serial_txx9_setup(struct uart_port *port);
- int i;
struct uart_port req;
for(i = 0; i < 2; i++) {
memset(&req, 0, sizeof(req));
@@ -937,12 +939,11 @@
void __init
toshiba_rbtx4927_time_init(void)
{
- TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT, "-\n");
-
mips_hpt_frequency = tx4927_cpu_clock / 2;
-
- TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT, "+\n");
-
+ if (tx4927_ccfgptr->ccfg & TX4927_CCFG_TINTDIS)
+ txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL,
+ TXX9_IRQ_BASE + 17,
+ 50000000);
}
static int __init toshiba_rbtx4927_rtc_init(void)
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
index ceecaf4..4a81523 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
@@ -26,6 +26,7 @@
#include <asm/reboot.h>
#include <asm/irq.h>
#include <asm/time.h>
+#include <asm/txx9tmr.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/bootinfo.h>
@@ -773,15 +774,8 @@
}
/* TMR */
- /* disable all timers */
- for (i = 0; i < TX4938_NR_TMR; i++) {
- tx4938_tmrptr(i)->tcr = 0x00000020;
- tx4938_tmrptr(i)->tisr = 0;
- tx4938_tmrptr(i)->cpra = 0xffffffff;
- tx4938_tmrptr(i)->itmr = 0;
- tx4938_tmrptr(i)->ccdr = 0;
- tx4938_tmrptr(i)->pgmr = 0;
- }
+ for (i = 0; i < TX4938_NR_TMR; i++)
+ txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
/* enable DMA */
TX4938_WR64(0xff1fb150, TX4938_DMA_MCR_MSTEN);
@@ -852,12 +846,13 @@
#endif /* CONFIG_PCI */
-/* We use onchip r4k counter or TMR timer as our system wide timer
- * interrupt running at 100HZ. */
-
void __init plat_time_init(void)
{
mips_hpt_frequency = txx9_cpu_clock / 2;
+ if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS)
+ txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL,
+ TXX9_IRQ_BASE + TX4938_IR_TMR(0),
+ txx9_gbus_clock / 2);
}
void __init toshiba_rbtx4938_setup(void)
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 4ec716d..1330061 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -513,7 +513,7 @@
default n
help
Select this option if you want to build an zfcpdump enabled kernel.
- Refer to "Documentation/s390/zfcpdump.txt" for more details on this.
+ Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.
endmenu
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 247f8a6..22a3eb3 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -182,9 +182,7 @@
bool
config CPU_HAS_SR_RB
- bool "CPU has SR.RB"
- depends on CPU_SH3 || CPU_SH4
- default y
+ bool
help
This will enable the use of SR.RB register bank usage. Processors
that are lacking this bit must have another method in place for
@@ -291,9 +289,7 @@
depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
- More information at
- <http://www.m17n.org/linux-sh/dreamcast/>. There is a
- Dreamcast project is at <http://linuxdc.sourceforge.net/>.
+ More information at <http://www.linux-sh.org>
config SH_MPC1211
bool "Interface MPC1211"
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index b507b50..ab2f9f3 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -86,6 +86,14 @@
on the VM subsystem for higher order allocations. This option
will also use IRQ stacks to compensate for the reduced stackspace.
+config IRQSTACKS
+ bool "Use separate kernel stacks when processing interrupts"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here the kernel will use separate kernel stacks
+ for handling hard and soft interrupts. This can help avoid
+ overflowing the process kernel stacks.
+
config SH_KGDB
bool "Include KGDB kernel debugger"
select FRAME_POINTER
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 408342b..e189fae 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -66,7 +66,7 @@
cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \
$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
-OBJCOPYFLAGS := -O binary -R .note -R .comment -R .stab -R .stabstr -S
+OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment -R .stab -R .stabstr -S
#
# arch/sh/defconfig doesn't reflect any real hardware, and as such should
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index afe9de7..0fdc0bc 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -16,6 +16,8 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pata_platform.h>
+#include <linux/types.h>
+#include <net/ax88796.h>
#include <asm/machvec.h>
#include <asm/r7780rp.h>
#include <asm/clock.h>
@@ -136,11 +138,50 @@
.resource = heartbeat_resources,
};
+static struct ax_plat_data ax88796_platdata = {
+ .flags = AXFLG_HAS_93CX6,
+ .wordlength = 2,
+ .dcr_val = 0x1,
+ .rcr_val = 0x40,
+};
+
+static struct resource ax88796_resources[] = {
+ {
+#ifdef CONFIG_SH_R7780RP
+ .start = 0xa5800400,
+ .end = 0xa5800400 + (0x20 * 0x2) - 1,
+#else
+ .start = 0xa4100400,
+ .end = 0xa4100400 + (0x20 * 0x2) - 1,
+#endif
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_AX88796,
+ .end = IRQ_AX88796,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ax88796_device = {
+ .name = "ax88796",
+ .id = 0,
+
+ .dev = {
+ .platform_data = &ax88796_platdata,
+ },
+
+ .num_resources = ARRAY_SIZE(ax88796_resources),
+ .resource = ax88796_resources,
+};
+
+
static struct platform_device *r7780rp_devices[] __initdata = {
&r8a66597_usb_host_device,
&m66592_usb_peripheral_device,
&cf_ide_device,
&heartbeat_device,
+ &ax88796_device,
};
static int __init r7780rp_devices_setup(void)
@@ -183,6 +224,34 @@
ctrl_outw(0x0001, PA_POFF);
}
+static inline unsigned char is_ide_ioaddr(unsigned long addr)
+{
+ return ((cf_ide_resources[0].start <= addr &&
+ addr <= cf_ide_resources[0].end) ||
+ (cf_ide_resources[1].start <= addr &&
+ addr <= cf_ide_resources[1].end));
+}
+
+void highlander_writeb(u8 b, void __iomem *addr)
+{
+ unsigned long tmp = (unsigned long __force)addr;
+
+ if (is_ide_ioaddr(tmp))
+ ctrl_outw((u16)b, tmp);
+ else
+ ctrl_outb(b, tmp);
+}
+
+u8 highlander_readb(void __iomem *addr)
+{
+ unsigned long tmp = (unsigned long __force)addr;
+
+ if (is_ide_ioaddr(tmp))
+ return ctrl_inw(tmp) & 0xff;
+ else
+ return ctrl_inb(tmp);
+}
+
/*
* Initialize the board
*/
@@ -267,4 +336,6 @@
.mv_setup = highlander_setup,
.mv_init_irq = highlander_init_irq,
.mv_irq_demux = highlander_irq_demux,
+ .mv_readb = highlander_readb,
+ .mv_writeb = highlander_writeb,
};
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
index 03b6345..20f0640 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/se/7722/setup.c
@@ -103,8 +103,8 @@
ctrl_outl(0x00051001, MSTPCR0);
ctrl_outl(0x00000000, MSTPCR1);
- /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC */
- ctrl_outl(0xffffbfC0, MSTPCR2);
+ /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */
+ ctrl_outl(0xffffb7c0, MSTPCR2);
ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 5c29338..158e03f 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Thu Jul 12 12:33:15 2007
+# Linux kernel version: 2.6.24-rc1
+# Fri Nov 2 14:30:49 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -13,39 +13,40 @@
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -66,7 +67,6 @@
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -75,24 +75,17 @@
# CONFIG_SLOB is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -115,7 +108,6 @@
CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -123,6 +115,7 @@
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -137,7 +130,6 @@
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_CPU_SUBTYPE_SH7785=y
# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
@@ -149,15 +141,17 @@
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_32BIT=y
+# CONFIG_32BIT is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_MAX_ACTIVE_REGIONS=2
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
@@ -167,12 +161,14 @@
# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
+# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -182,7 +178,9 @@
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
@@ -190,12 +188,11 @@
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
CONFIG_SH_STORE_QUEUES=y
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC2_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
#
# Board support
@@ -214,6 +211,7 @@
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
@@ -249,6 +247,7 @@
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
+CONFIG_GUSA=y
#
# Boot options
@@ -268,10 +267,6 @@
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -322,6 +317,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -348,10 +344,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -371,6 +363,7 @@
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -379,33 +372,17 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
@@ -419,14 +396,11 @@
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
+CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
# CONFIG_IDE is not set
#
@@ -434,6 +408,7 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -463,12 +438,9 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -478,7 +450,6 @@
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -543,6 +514,7 @@
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
@@ -556,45 +528,26 @@
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
@@ -603,17 +556,20 @@
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -631,11 +587,14 @@
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -653,15 +612,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -669,6 +620,7 @@
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -678,7 +630,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -732,21 +683,11 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
@@ -756,21 +697,31 @@
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -787,19 +738,16 @@
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -819,7 +767,6 @@
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_EPSON1355 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
@@ -839,6 +786,12 @@
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_LOGO is not set
#
@@ -855,20 +808,14 @@
# Open Sound System
#
CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
@@ -883,32 +830,8 @@
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -925,10 +848,6 @@
# CONFIG_RTC_DRV_TEST is not set
#
-# I2C RTC drivers
-#
-
-#
# SPI RTC drivers
#
@@ -936,8 +855,10 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -946,17 +867,9 @@
CONFIG_RTC_DRV_SH=y
#
-# DMA Engine support
+# Userspace I/O
#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_UIO is not set
#
# File systems
@@ -1017,7 +930,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
@@ -1036,10 +948,7 @@
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1065,17 +974,12 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -1116,23 +1020,18 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1141,6 +1040,7 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
@@ -1150,6 +1050,7 @@
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
@@ -1159,17 +1060,21 @@
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_BOOTMEM is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
+# CONFIG_IRQSTACKS is not set
# CONFIG_SH_KGDB is not set
#
@@ -1177,10 +1082,7 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
@@ -1201,6 +1103,7 @@
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1214,15 +1117,14 @@
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
#
# Library routines
@@ -1232,6 +1134,7 @@
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c
index 1502a14..0814a5a 100644
--- a/arch/sh/drivers/pci/pci-st40.c
+++ b/arch/sh/drivers/pci/pci-st40.c
@@ -114,7 +114,7 @@
{ INT_MWPDI, "MWPDI: PERR from target at data write"},
{ INT_MRDPEI, "MRDPEI: Master read data parity error"}
};
-#define NUM_PCI_INT_ERRS (sizeof(int_error)/sizeof(struct pci_err))
+#define NUM_PCI_INT_ERRS ARRAY_SIZE(int_error)
static struct pci_err aint_error[]={
{ AINT_MBI, "MBI: Master broken"},
@@ -126,7 +126,7 @@
{ AINT_WDPE, "WDPE: Write data parity"}
};
-#define NUM_PCI_AINT_ERRS (sizeof(aint_error)/sizeof(struct pci_err))
+#define NUM_PCI_AINT_ERRS ARRAY_SIZE(aint_error)
static void print_pci_errors(unsigned reg,struct pci_err *error,int num_errors)
{
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index 5da3254..56ea7b2 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -49,7 +49,6 @@
* bits/4. This is to make it easier to read the value directly from the
* datasheets. The IPR address is calculated using the ipr_offset table.
*/
-
void register_ipr_controller(struct ipr_desc *desc)
{
int i;
@@ -71,12 +70,4 @@
disable_ipr_irq(p->irq);
}
}
-
EXPORT_SYMBOL(register_ipr_controller);
-
-#if !defined(CONFIG_CPU_HAS_PINT_IRQ)
-int ipr_irq_demux(int irq)
-{
- return irq;
-}
-#endif
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 55f6610..b9c6547 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -14,6 +14,32 @@
#include <asm/mmzone.h>
#include <asm/sci.h>
+static struct resource usbf_resources[] = {
+ [0] = {
+ .name = "m66592_udc",
+ .start = 0xA4480000,
+ .end = 0xA44800FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "m66592_udc",
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usbf_device = {
+ .name = "m66592_udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(usbf_resources),
+ .resource = usbf_resources,
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
@@ -47,6 +73,7 @@
};
static struct platform_device *sh7722_devices[] __initdata = {
+ &usbf_device,
&sci_device,
};
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 4b49d03..348da19 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -69,7 +69,7 @@
}
#endif
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
/*
* per-CPU IRQ handling contexts (thread information and stack)
*/
@@ -85,7 +85,7 @@
asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
union irq_ctx *curctx, *irqctx;
#endif
@@ -109,7 +109,7 @@
irq = irq_demux(evt2irq(irq));
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
curctx = (union irq_ctx *)current_thread_info();
irqctx = hardirq_ctx[smp_processor_id()];
@@ -157,7 +157,7 @@
return 1;
}
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
static char softirq_stack[NR_CPUS * THREAD_SIZE]
__attribute__((__section__(".bss.page_aligned")));
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index b749403..0b8c45d 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -32,12 +32,6 @@
#include <asm/clock.h>
#include <asm/mmu_context.h>
-extern void * __rd_start, * __rd_end;
-
-/*
- * Machine setup..
- */
-
/*
* Initialize loops_per_jiffy as 10000000 (1000MIPS).
* This value will be used at the very early stage of serial setup.
@@ -63,33 +57,25 @@
extern int root_mountflags;
-/*
- * This is set up by the setup-routine at boot-time
- */
-#define PARAM ((unsigned char *)empty_zero_page)
-
-#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
-#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
-#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
-#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
-#define INITRD_START (*(unsigned long *) (PARAM+0x010))
-#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
-/* ... */
-#define COMMAND_LINE ((char *) (PARAM+0x100))
-
#define RAMDISK_IMAGE_START_MASK 0x07FF
#define RAMDISK_PROMPT_FLAG 0x8000
#define RAMDISK_LOAD_FLAG 0x4000
static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
-static struct resource code_resource = { .name = "Kernel code", };
-static struct resource data_resource = { .name = "Kernel data", };
+static struct resource code_resource = {
+ .name = "Kernel code",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
+};
+
+static struct resource data_resource = {
+ .name = "Kernel data",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
+};
unsigned long memory_start;
EXPORT_SYMBOL(memory_start);
-
-unsigned long memory_end;
+unsigned long memory_end = 0;
EXPORT_SYMBOL(memory_end);
static int __init early_parse_mem(char *p)
@@ -195,14 +181,7 @@
sparse_memory_present_with_active_regions(0);
#ifdef CONFIG_BLK_DEV_INITRD
- ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
- if (&__rd_start != &__rd_end) {
- LOADER_TYPE = 1;
- INITRD_START = PHYSADDR((unsigned long)&__rd_start) -
- __MEMORY_START;
- INITRD_SIZE = (unsigned long)&__rd_end -
- (unsigned long)&__rd_start;
- }
+ ROOT_DEV = Root_RAM0;
if (LOADER_TYPE && INITRD_START) {
if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
@@ -265,7 +244,8 @@
data_resource.end = virt_to_phys(_edata)-1;
memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
- memory_end = memory_start + __MEMORY_SIZE;
+ if (!memory_end)
+ memory_end = memory_start + __MEMORY_SIZE;
#ifdef CONFIG_CMDLINE_BOOL
strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 6d5abba..0956fb3 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -1,4 +1,4 @@
-/* $Id: vmlinux.lds.S,v 1.8 2003/05/16 17:18:14 lethal Exp $
+/*
* ld script to make SuperH Linux kernel
* Written by Niibe Yutaka
*/
@@ -15,121 +15,124 @@
ENTRY(_start)
SECTIONS
{
- . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
- _text = .; /* Text and read-only data */
- text = .; /* Text and read-only data */
- .empty_zero_page : {
- *(.empty_zero_page)
+ . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
+ _text = .; /* Text and read-only data */
+
+ .empty_zero_page : {
+ *(.empty_zero_page)
} = 0
- .text : {
- *(.text.head)
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- *(.fixup)
- *(.gnu.warning)
+
+ .text : {
+ *(.text.head)
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.fixup)
+ *(.gnu.warning)
} = 0x0009
- . = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
+ . = ALIGN(16); /* Exception table */
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
- _etext = .; /* End of text section */
+ _etext = .; /* End of text section */
- RODATA
+ BUG_TABLE
+ NOTES
+ RO_DATA(PAGE_SIZE)
- BUG_TABLE
+ . = ALIGN(THREAD_SIZE);
+ .data : { /* Data */
+ *(.data.init_task)
- .data : { /* Data */
- DATA_DATA
+ . = ALIGN(L1_CACHE_BYTES);
+ *(.data.cacheline_aligned)
- /* Align the initial ramdisk image (INITRD) on page boundaries. */
- . = ALIGN(PAGE_SIZE);
- __rd_start = .;
- *(.initrd)
- . = ALIGN(PAGE_SIZE);
- __rd_end = .;
+ . = ALIGN(L1_CACHE_BYTES);
+ *(.data.read_mostly)
- CONSTRUCTORS
+ . = ALIGN(PAGE_SIZE);
+ *(.data.page_aligned)
+
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+
+ DATA_DATA
+ CONSTRUCTORS
}
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : { *(.data.page_aligned) }
- __nosave_begin = .;
- .data_nosave : { *(.data.nosave) }
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
+ _edata = .; /* End of data section */
- PERCPU(PAGE_SIZE)
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
+ __init_begin = .;
+ _sinittext = .;
+ .init.text : { *(.init.text) }
+ _einittext = .;
+ .init.data : { *(.init.data) }
- . = ALIGN(L1_CACHE_BYTES);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+ . = ALIGN(16);
+ __setup_start = .;
+ .init.setup : { *(.init.setup) }
+ __setup_end = .;
- _edata = .; /* End of data section */
+ __initcall_start = .;
+ .initcall.init : {
+ INITCALLS
+ }
+ __initcall_end = .;
+ __con_initcall_start = .;
+ .con_initcall.init : { *(.con_initcall.init) }
+ __con_initcall_end = .;
- . = ALIGN(THREAD_SIZE); /* init_task */
- .data.init_task : { *(.data.init_task) }
-
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- __init_begin = .;
- _sinittext = .;
- .init.text : { *(.init.text) }
- _einittext = .;
- .init.data : { *(.init.data) }
- . = ALIGN(16);
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
- __initcall_start = .;
- .initcall.init : {
- INITCALLS
- }
- __initcall_end = .;
- __con_initcall_start = .;
- .con_initcall.init : { *(.con_initcall.init) }
- __con_initcall_end = .;
- SECURITY_INIT
-
- /* .exit.text is discarded at runtime, not link time, to deal with
- references from .rodata */
- .exit.text : { *(.exit.text) }
- .exit.data : { *(.exit.data) }
+ SECURITY_INIT
#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
-
- __initramfs_start = .;
- .init.ramfs : { *(.init.ramfs) }
- __initramfs_end = .;
+ . = ALIGN(PAGE_SIZE);
+ __initramfs_start = .;
+ .init.ramfs : { *(.init.ramfs) }
+ __initramfs_end = .;
#endif
- . = ALIGN(4);
- __machvec_start = .;
- .machvec.init : { *(.machvec.init) }
- __machvec_end = .;
-
- . = ALIGN(PAGE_SIZE);
- .bss : {
- __init_end = .;
- __bss_start = .; /* BSS */
- *(.bss.page_aligned)
- *(.bss)
. = ALIGN(4);
- _ebss = .; /* uClinux MTD sucks */
- _end = . ;
- }
+ __machvec_start = .;
+ .machvec.init : { *(.machvec.init) }
+ __machvec_end = .;
- /* When something in the kernel is NOT compiled as a module, the
- * module cleanup code and data are put into these segments. Both
- * can then be thrown away, as cleanup code is never called unless
- * it's a module.
- */
- /DISCARD/ : {
- *(.exitcall.exit)
+ PERCPU(PAGE_SIZE)
+
+ /*
+ * .exit.text is discarded at runtime, not link time, to deal with
+ * references from __bug_table
+ */
+ .exit.text : { *(.exit.text) }
+ .exit.data : { *(.exit.data) }
+
+ . = ALIGN(PAGE_SIZE);
+ .bss : {
+ __init_end = .;
+ __bss_start = .; /* BSS */
+ *(.bss.page_aligned)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .; /* uClinux MTD sucks */
+ _end = . ;
}
- STABS_DEBUG
+ /*
+ * When something in the kernel is NOT compiled as a module, the
+ * module cleanup code and data are put into these segments. Both
+ * can then be thrown away, as cleanup code is never called unless
+ * it's a module.
+ */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ }
- DWARF_DEBUG
+ STABS_DEBUG
+ DWARF_DEBUG
}
diff --git a/arch/sh/kernel/vsyscall/vsyscall.lds.S b/arch/sh/kernel/vsyscall/vsyscall.lds.S
index c9bf2af..6d59ee7 100644
--- a/arch/sh/kernel/vsyscall/vsyscall.lds.S
+++ b/arch/sh/kernel/vsyscall/vsyscall.lds.S
@@ -38,7 +38,10 @@
.text : { *(.text) } :text =0x90909090
.note : { *(.note.*) } :text :note
.eh_frame_hdr : { *(.eh_frame_hdr ) } :text :eh_frame_hdr
- .eh_frame : { KEEP (*(.eh_frame)) } :text
+ .eh_frame : {
+ KEEP (*(.eh_frame))
+ LONG (0)
+ } :text
.dynamic : { *(.dynamic) } :text :dynamic
.useless : {
*(.got.plt) *(.got)
diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S
index a81dbdb..3d8409d 100644
--- a/arch/sh/mm/copy_page.S
+++ b/arch/sh/mm/copy_page.S
@@ -255,7 +255,11 @@
EX( mov.l @r5+,r9 )
EX( mov.l @r5+,r10 )
EX( mov.l @r5+,r11 )
+#ifdef CONFIG_CPU_SH4
EX( movca.l r0,@r4 )
+#else
+EX( mov.l r0,@r4 )
+#endif
add #-32, r6
EX( mov.l r1,@(4,r4) )
mov #32, r0
diff --git a/arch/sh/oprofile/op_model_sh7750.c b/arch/sh/oprofile/op_model_sh7750.c
index ebee7e24e..6b9a98e 100644
--- a/arch/sh/oprofile/op_model_sh7750.c
+++ b/arch/sh/oprofile/op_model_sh7750.c
@@ -16,7 +16,6 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
-#include <linux/notifier.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -44,8 +43,6 @@
*/
#define NR_CNTRS 2
-extern const char *get_cpu_subtype(void);
-
struct op_counter_config {
unsigned long enabled;
unsigned long event;
@@ -111,17 +108,12 @@
* behavior.
*/
-static int sh7750_timer_notify(struct notifier_block *self,
- unsigned long val, void *regs)
+static int sh7750_timer_notify(struct pt_regs *regs)
{
- oprofile_add_sample((struct pt_regs *)regs, 0);
+ oprofile_add_sample(regs, 0);
return 0;
}
-static struct notifier_block sh7750_timer_notifier = {
- .notifier_call = sh7750_timer_notify,
-};
-
static u64 sh7750_read_counter(int counter)
{
u32 hi, lo;
@@ -240,7 +232,7 @@
ctrl_outw(pmcr | PMCR_ENABLE, PMCR2);
}
- return register_profile_notifier(&sh7750_timer_notifier);
+ return register_timer_hook(sh7750_timer_notify);
}
static void sh7750_perf_counter_stop(void)
@@ -248,7 +240,7 @@
ctrl_outw(ctrl_inw(PMCR1) & ~PMCR_PMEN, PMCR1);
ctrl_outw(ctrl_inw(PMCR2) & ~PMCR_PMEN, PMCR2);
- unregister_profile_notifier(&sh7750_timer_notifier);
+ unregister_timer_hook(sh7750_timer_notify);
}
static struct oprofile_operations sh7750_perf_counter_ops = {
@@ -257,13 +249,13 @@
.stop = sh7750_perf_counter_stop,
};
-int __init oprofile_arch_init(struct oprofile_operations **ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
{
if (!(current_cpu_data.flags & CPU_HAS_PERF_COUNTER))
return -ENODEV;
- sh7750_perf_counter_ops.cpu_type = (char *)get_cpu_subtype();
- *ops = &sh7750_perf_counter_ops;
+ ops = &sh7750_perf_counter_ops;
+ ops->cpu_type = (char *)get_cpu_subtype(¤t_cpu_data);
printk(KERN_INFO "oprofile: using SH-4 (%s) performance monitoring.\n",
sh7750_perf_counter_ops.cpu_type);
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 439bfe3..ff07169 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -1,26 +1,35 @@
#
-# List of boards.
+# MACH_<xxx> CONFIG_<xxx>
#
#
-# MACH_<xxx> CONFIG_<xxx>
+# List of board groups.
#
SE SH_SOLUTION_ENGINE
-7751SE SH_7751_SOLUTION_ENGINE
-7722SE SH_7722_SOLUTION_ENGINE
-7343SE SH_7343_SOLUTION_ENGINE
+HIGHLANDER SH_HIGHLANDER
+RTS7751R2D SH_RTS7751R2D
+
+#
+# List of companion chips / MFDs.
+#
+HD64461 HD64461
+HD64465 HD64465
+
+#
+# List of boards.
+#
7206SE SH_7206_SOLUTION_ENGINE
+7343SE SH_7343_SOLUTION_ENGINE
7619SE SH_7619_SOLUTION_ENGINE
+7722SE SH_7722_SOLUTION_ENGINE
+7751SE SH_7751_SOLUTION_ENGINE
7780SE SH_7780_SOLUTION_ENGINE
7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
-HD64461 HD64461
-HD64465 HD64465
DREAMCAST SH_DREAMCAST
MPC1211 SH_MPC1211
SNAPGEAR SH_SECUREEDGE5410
HS7751RVOIP SH_HS7751RVOIP
-RTS7751R2D SH_RTS7751R2D
EDOSK7705 SH_EDOSK7705
SH4202_MICRODEV SH_SH4202_MICRODEV
SH03 SH_SH03
@@ -32,3 +41,7 @@
SHMIN SH_SHMIN
7710VOIPGW SH_7710VOIPGW
LBOXRE2 SH_LBOX_RE2
+X3PROTO SH_X3PROTO
+MAGICPANELR2 SH_MAGIC_PANEL_R2
+R2D_PLUS RTS7751R2D_PLUS
+R2D_1 RTS7751R2D_1
diff --git a/arch/sh64/Kconfig b/arch/sh64/Kconfig
index ba204ba..6884d5a 100644
--- a/arch/sh64/Kconfig
+++ b/arch/sh64/Kconfig
@@ -1,6 +1,6 @@
#
# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/config-language.txt.
+# see Documentation/kbuild/kconfig-language.txt.
#
mainmenu "Linux/SH64 Kernel Configuration"
diff --git a/arch/sh64/configs/cayman_defconfig b/arch/sh64/configs/cayman_defconfig
index 91b5911..75552bb 100644
--- a/arch/sh64/configs/cayman_defconfig
+++ b/arch/sh64/configs/cayman_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc8
-# Tue Oct 9 15:37:16 2007
+# Linux kernel version: 2.6.24-rc1
+# Fri Nov 2 14:35:27 2007
#
CONFIG_SUPERH=y
CONFIG_SUPERH64=y
@@ -36,6 +36,10 @@
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -148,6 +152,7 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -160,10 +165,6 @@
CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -209,6 +210,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -234,10 +236,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -266,6 +264,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -333,6 +332,7 @@
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
@@ -370,14 +370,7 @@
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -392,6 +385,8 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -402,6 +397,7 @@
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
@@ -413,13 +409,16 @@
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@@ -437,6 +436,7 @@
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -453,11 +453,14 @@
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -493,7 +496,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -561,23 +563,9 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@@ -644,8 +632,6 @@
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -653,12 +639,12 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -694,6 +680,25 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -713,11 +718,11 @@
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_TEA5761 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_CORE=y
@@ -796,6 +801,7 @@
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
#
# Tuners/PLL support
@@ -805,6 +811,9 @@
# CONFIG_DVB_TDA827X is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
+# CONFIG_DVB_TUNER_MT2266 is not set
+# CONFIG_DVB_TUNER_MT2131 is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
#
# Miscellaneous devices
@@ -817,12 +826,7 @@
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
@@ -831,6 +835,7 @@
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -869,6 +874,12 @@
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -903,6 +914,7 @@
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -923,19 +935,6 @@
# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
# Userspace I/O
#
# CONFIG_UIO is not set
@@ -994,7 +993,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1013,10 +1011,7 @@
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1058,26 +1053,17 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1101,10 +1087,13 @@
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_EARLY_PRINTK is not set
CONFIG_SH64_PROC_TLB=y
CONFIG_SH64_PROC_ASIDS=y
@@ -1118,6 +1107,7 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
diff --git a/arch/sh64/configs/harp_defconfig b/arch/sh64/configs/harp_defconfig
index e4b84b5..ba302cd 100644
--- a/arch/sh64/configs/harp_defconfig
+++ b/arch/sh64/configs/harp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc8
-# Mon Oct 1 18:01:38 2007
+# Linux kernel version: 2.6.24-rc1
+# Fri Nov 2 14:35:57 2007
#
CONFIG_SUPERH=y
CONFIG_SUPERH64=y
@@ -36,6 +36,10 @@
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -141,6 +145,7 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -150,10 +155,6 @@
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -198,6 +199,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -223,10 +225,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -255,6 +253,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -314,6 +313,7 @@
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
@@ -326,11 +326,18 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
@@ -364,7 +371,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -410,13 +416,6 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -432,9 +431,8 @@
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
@@ -444,6 +442,19 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -460,12 +471,6 @@
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
@@ -474,6 +479,7 @@
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -490,6 +496,12 @@
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -524,6 +536,7 @@
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -543,19 +556,6 @@
# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
# Userspace I/O
#
# CONFIG_UIO is not set
@@ -614,7 +614,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -633,10 +632,7 @@
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -678,26 +674,17 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -721,16 +708,17 @@
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_KERNEL_WITH_GDB_STUB is not set
CONFIG_SH64_PROC_TLB=y
CONFIG_SH64_PROC_ASIDS=y
CONFIG_SH64_SR_WATCH=y
# CONFIG_POOR_MANS_STRACE is not set
-# CONFIG_SH_ALPHANUMERIC is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
@@ -738,6 +726,7 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
diff --git a/arch/sh64/configs/sim_defconfig b/arch/sh64/configs/sim_defconfig
index f83bae6..18476cc 100644
--- a/arch/sh64/configs/sim_defconfig
+++ b/arch/sh64/configs/sim_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc8
-# Mon Oct 1 17:50:35 2007
+# Linux kernel version: 2.6.24-rc1
+# Fri Nov 2 14:36:08 2007
#
CONFIG_SUPERH=y
CONFIG_SUPERH64=y
@@ -33,6 +33,10 @@
# CONFIG_USER_NS is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
@@ -138,6 +142,7 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -147,10 +152,6 @@
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -171,6 +172,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -217,6 +219,7 @@
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_ATA is not set
@@ -238,7 +241,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -283,7 +285,6 @@
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
@@ -298,6 +299,13 @@
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -313,12 +321,6 @@
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
@@ -327,6 +329,7 @@
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -343,6 +346,12 @@
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -381,19 +390,6 @@
# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
# Userspace I/O
#
# CONFIG_UIO is not set
@@ -451,7 +447,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -492,22 +487,17 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -531,16 +521,17 @@
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_KERNEL_WITH_GDB_STUB is not set
CONFIG_SH64_PROC_TLB=y
CONFIG_SH64_PROC_ASIDS=y
CONFIG_SH64_SR_WATCH=y
# CONFIG_POOR_MANS_STRACE is not set
-# CONFIG_SH_ALPHANUMERIC is not set
CONFIG_SH_NO_BSS_INIT=y
#
@@ -548,6 +539,7 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index f2eae45..f2d432e 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -753,7 +753,7 @@
local_irq_enable();
}
-static __inline__ unsigned long do_gettimeoffset(void)
+static inline unsigned long do_gettimeoffset(void)
{
/*
* We divide all by 100
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index 33f7a3d..77460e3 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -1,7 +1,6 @@
-/* $Id: process.c,v 1.161 2002/01/23 11:27:32 davem Exp $
- * linux/arch/sparc/kernel/process.c
+/* linux/arch/sparc/kernel/process.c
*
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
*/
@@ -397,7 +396,7 @@
}
}
-static __inline__ struct sparc_stackf __user *
+static inline struct sparc_stackf __user *
clone_stackframe(struct sparc_stackf __user *dst,
struct sparc_stackf __user *src)
{
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index 4bf78a5..45cb7c5 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -1,7 +1,6 @@
-/* $Id: time.c,v 1.60 2002/01/23 14:33:55 davem Exp $
- * linux/arch/sparc/kernel/time.c
+/* linux/arch/sparc/kernel/time.c
*
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
* Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
*
* Chris Davis (cdavis@cois.on.ca) 03/27/1998
@@ -210,7 +209,7 @@
}
/* Return nonzero if the clock chip battery is low. */
-static __inline__ int has_low_battery(void)
+static inline int has_low_battery(void)
{
struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs;
unsigned char data1, data2;
@@ -252,7 +251,7 @@
}
/* Probe for the real time clock chip on Sun4 */
-static __inline__ void sun4_clock_probe(void)
+static inline void sun4_clock_probe(void)
{
#ifdef CONFIG_SUN4
int temp;
diff --git a/arch/sparc/mm/btfixup.c b/arch/sparc/mm/btfixup.c
index ec4231c..a312d12 100644
--- a/arch/sparc/mm/btfixup.c
+++ b/arch/sparc/mm/btfixup.c
@@ -1,5 +1,4 @@
-/* $Id: btfixup.c,v 1.10 2000/05/09 17:40:13 davem Exp $
- * btfixup.c: Boot time code fixup and relocator, so that
+/* btfixup.c: Boot time code fixup and relocator, so that
* we can get rid of most indirect calls to achieve single
* image sun4c and srmmu kernel.
*
@@ -69,7 +68,7 @@
}
}
#else
-static __inline__ void set_addr(unsigned int *addr, unsigned int q1, int fmangled, unsigned int value)
+static inline void set_addr(unsigned int *addr, unsigned int q1, int fmangled, unsigned int value)
{
*addr = value;
}
diff --git a/arch/sparc/mm/io-unit.c b/arch/sparc/mm/io-unit.c
index 1666087..b86dfce 100644
--- a/arch/sparc/mm/io-unit.c
+++ b/arch/sparc/mm/io-unit.c
@@ -144,7 +144,7 @@
spin_lock_irqsave(&iounit->lock, flags);
while (sz != 0) {
--sz;
- sg->dvma_address = iounit_get_area(iounit, sg_virt(sg), sg->length);
+ sg->dvma_address = iounit_get_area(iounit, (unsigned long) sg_virt(sg), sg->length);
sg->dvma_length = sg->length;
sg = sg_next(sg);
}
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index a2cc1412..0729305 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -1,7 +1,6 @@
-/* $Id: sun4c.c,v 1.212 2001/12/21 04:56:15 davem Exp $
- * sun4c.c: Doing in software what should be done in hardware.
+/* sun4c.c: Doing in software what should be done in hardware.
*
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 1996 Andrew Tridgell (Andrew.Tridgell@anu.edu.au)
* Copyright (C) 1997-2000 Anton Blanchard (anton@samba.org)
@@ -719,7 +718,7 @@
ring->num_entries++;
}
-static __inline__ void add_lru(struct sun4c_mmu_entry *entry)
+static inline void add_lru(struct sun4c_mmu_entry *entry)
{
struct sun4c_mmu_ring *ring = &sun4c_ulru_ring;
struct sun4c_mmu_entry *head = &ring->ringhd;
@@ -746,7 +745,7 @@
add_lru(entry);
}
-static __inline__ void remove_ring(struct sun4c_mmu_ring *ring,
+static inline void remove_ring(struct sun4c_mmu_ring *ring,
struct sun4c_mmu_entry *entry)
{
struct sun4c_mmu_entry *next = entry->next;
@@ -1836,7 +1835,7 @@
}
-static __inline__ unsigned long sun4c_pmd_page_v(pmd_t pmd)
+static inline unsigned long sun4c_pmd_page_v(pmd_t pmd)
{
return (pmd_val(pmd) & PAGE_MASK);
}
@@ -1922,7 +1921,7 @@
}
-static __inline__ pte_t *
+static inline pte_t *
sun4c_pte_alloc_one_fast(struct mm_struct *mm, unsigned long address)
{
unsigned long *ret;
@@ -1956,7 +1955,7 @@
return virt_to_page(pte);
}
-static __inline__ void sun4c_free_pte_fast(pte_t *pte)
+static inline void sun4c_free_pte_fast(pte_t *pte)
{
*(unsigned long *)pte = (unsigned long) pte_quicklist;
pte_quicklist = (unsigned long *) pte;
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index bd59ab0..10b212a 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -408,7 +408,7 @@
config SOLARIS_EMUL
tristate "Solaris binary emulation (EXPERIMENTAL)"
- depends on SPARC32_COMPAT && EXPERIMENTAL
+ depends on SPARC32_COMPAT && NET && EXPERIMENTAL
help
This is experimental code which will enable you to run (many)
Solaris binaries on your SPARC Linux machine.
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index e023d4b..22734ac 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Sun Oct 21 19:57:44 2007
+# Linux kernel version: 2.6.24-rc1
+# Wed Oct 31 15:36:47 2007
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
@@ -19,6 +19,7 @@
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
@@ -55,7 +56,8 @@
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
@@ -117,22 +119,7 @@
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=m
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_US3_FREQ=m
-CONFIG_US2E_FREQ=m
+# CONFIG_CPU_FREQ is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
@@ -161,7 +148,7 @@
CONFIG_SBUSCHAR=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
-# CONFIG_SUN_LDOMS is not set
+CONFIG_SUN_LDOMS=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
@@ -338,6 +325,7 @@
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
+CONFIG_SUNVDC=m
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
@@ -440,12 +428,12 @@
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -506,7 +494,7 @@
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
-CONFIG_DUMMY=m
+# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
@@ -523,6 +511,7 @@
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
CONFIG_CASSINI=m
+CONFIG_SUNVNET=m
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
@@ -577,7 +566,7 @@
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
+CONFIG_NIU=m
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
@@ -702,7 +691,8 @@
# CONFIG_SERIAL_SUNZILOG is not set
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
-CONFIG_SERIAL_SUNSAB=m
+CONFIG_SERIAL_SUNSAB=y
+CONFIG_SERIAL_SUNSAB_CONSOLE=y
CONFIG_SERIAL_SUNHV=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -880,9 +870,17 @@
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
-# CONFIG_FB_SBUS is not set
-# CONFIG_FB_XVR500 is not set
-# CONFIG_FB_XVR2500 is not set
+CONFIG_FB_SBUS=y
+# CONFIG_FB_BW2 is not set
+# CONFIG_FB_CG3 is not set
+CONFIG_FB_CG6=y
+CONFIG_FB_FFB=y
+# CONFIG_FB_TCX is not set
+# CONFIG_FB_CG14 is not set
+# CONFIG_FB_P9100 is not set
+# CONFIG_FB_LEO is not set
+CONFIG_FB_XVR500=y
+CONFIG_FB_XVR2500=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
@@ -892,7 +890,11 @@
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+# CONFIG_FB_ATY_GENERIC_LCD is not set
+CONFIG_FB_ATY_GX=y
+# CONFIG_FB_ATY_BACKLIGHT is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
@@ -1191,7 +1193,7 @@
#
# Misc Linux/SPARC drivers
#
-CONFIG_SUN_OPENPROMIO=m
+CONFIG_SUN_OPENPROMIO=y
# CONFIG_OBP_FLASH is not set
# CONFIG_SUN_BPP is not set
# CONFIG_BBC_I2C is not set
@@ -1199,11 +1201,6 @@
# CONFIG_DISPLAY7SEG is not set
#
-# Fibre Channel support
-#
-# CONFIG_FC4 is not set
-
-#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1345,6 +1342,7 @@
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1371,6 +1369,7 @@
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
diff --git a/arch/sparc64/kernel/binfmt_elf32.c b/arch/sparc64/kernel/binfmt_elf32.c
index 9ad84ff..1587a29 100644
--- a/arch/sparc64/kernel/binfmt_elf32.c
+++ b/arch/sparc64/kernel/binfmt_elf32.c
@@ -1,7 +1,7 @@
/*
* binfmt_elf32.c: Support 32-bit Sparc ELF binaries on Ultra.
*
- * Copyright (C) 1995, 1996, 1997, 1998 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1995, 1996, 1997, 1998 David S. Miller (davem@davemloft.net)
* Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek (jj@ultra.linux.cz)
*/
@@ -133,7 +133,7 @@
#undef cputime_to_timeval
#define cputime_to_timeval cputime_to_compat_timeval
-static __inline__ void
+static inline void
cputime_to_compat_timeval(const cputime_t cputime, struct compat_timeval *value)
{
unsigned long jiffies = cputime_to_jiffies(cputime);
diff --git a/arch/sparc64/kernel/central.c b/arch/sparc64/kernel/central.c
index 8230099..b61b8df 100644
--- a/arch/sparc64/kernel/central.c
+++ b/arch/sparc64/kernel/central.c
@@ -1,7 +1,6 @@
-/* $Id: central.c,v 1.15 2001/12/19 00:29:51 davem Exp $
- * central.c: Central FHC driver for Sunfire/Starfire/Wildfire.
+/* central.c: Central FHC driver for Sunfire/Starfire/Wildfire.
*
- * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1997, 1999 David S. Miller (davem@davemloft.net)
*/
#include <linux/kernel.h>
@@ -385,7 +384,7 @@
init_all_fhc_hw();
}
-static __inline__ void fhc_ledblink(struct linux_fhc *fhc, int on)
+static inline void fhc_ledblink(struct linux_fhc *fhc, int on)
{
u32 tmp;
@@ -402,7 +401,7 @@
upa_readl(fhc->fhc_regs.pregs + FHC_PREGS_CTRL);
}
-static __inline__ void central_ledblink(struct linux_central *central, int on)
+static inline void central_ledblink(struct linux_central *central, int on)
{
u8 tmp;
diff --git a/arch/sparc64/kernel/iommu_common.c b/arch/sparc64/kernel/iommu_common.c
index b70324e..efd5dff 100644
--- a/arch/sparc64/kernel/iommu_common.c
+++ b/arch/sparc64/kernel/iommu_common.c
@@ -234,7 +234,7 @@
dma_sg->dma_length = dent_len;
if (dma_sg != sg) {
- dma_sg = next_sg(dma_sg);
+ dma_sg = sg_next(dma_sg);
dma_sg->dma_length = 0;
}
diff --git a/arch/sparc64/kernel/ldc.c b/arch/sparc64/kernel/ldc.c
index c8313cb..217478a 100644
--- a/arch/sparc64/kernel/ldc.c
+++ b/arch/sparc64/kernel/ldc.c
@@ -2121,7 +2121,7 @@
state.nc = 0;
for (i = 0; i < num_sg; i++)
- fill_cookies(&state, page_to_pfn(sg[i].page) << PAGE_SHIFT,
+ fill_cookies(&state, page_to_pfn(sg_page(&sg[i])) << PAGE_SHIFT,
sg[i].offset, sg[i].length);
return state.nc;
diff --git a/arch/sparc64/kernel/semaphore.c b/arch/sparc64/kernel/semaphore.c
index a809e63..9974a68 100644
--- a/arch/sparc64/kernel/semaphore.c
+++ b/arch/sparc64/kernel/semaphore.c
@@ -1,5 +1,4 @@
-/* $Id: semaphore.c,v 1.9 2001/11/18 00:12:56 davem Exp $
- * semaphore.c: Sparc64 semaphore implementation.
+/* semaphore.c: Sparc64 semaphore implementation.
*
* This is basically the PPC semaphore scheme ported to use
* the sparc64 atomic instructions, so see the PPC code for
@@ -19,7 +18,7 @@
* sem->count = tmp;
* return old_count;
*/
-static __inline__ int __sem_update_count(struct semaphore *sem, int incr)
+static inline int __sem_update_count(struct semaphore *sem, int incr)
{
int old_count, tmp;
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 407d74a..7cd8d94 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -459,7 +459,7 @@
}
}
-static __inline__ void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
+static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
{
u64 pstate;
int i;
@@ -906,7 +906,7 @@
extern atomic_t dcpage_flushes_xcall;
#endif
-static __inline__ void __local_flush_dcache_page(struct page *page)
+static inline void __local_flush_dcache_page(struct page *page)
{
#ifdef DCACHE_ALIASING_POSSIBLE
__flush_dcache_page(page_address(page),
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 23fad7e..60765e3 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -221,7 +221,7 @@
/* I/O device mmaping on Sparc64. */
EXPORT_SYMBOL(io_remap_pfn_range);
-#ifdef CONFIG_COMPAT
+#if defined(CONFIG_COMPAT) && defined(CONFIG_NET)
/* Solaris/SunOS binary compatibility */
EXPORT_SYMBOL(verify_compat_iovec);
#endif
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index 560cb1e..c56573a 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -318,7 +318,7 @@
if (flags & MAP_FIXED) {
/* Ok, don't mess with it. */
- return get_unmapped_area(NULL, addr, len, pgoff, flags);
+ return get_unmapped_area(NULL, orig_addr, len, pgoff, flags);
}
flags &= ~MAP_SHARED;
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index cd8c740..a2cf955 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -1070,7 +1070,7 @@
* Not having a register set can lead to trouble.
* Also starfire doesn't have a tod clock.
*/
- if (!mregs && !dregs & !bregs)
+ if (!mregs && !dregs && !bregs)
return -1;
if (mregs) {
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index e9c7e4f..04998388 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -1,7 +1,6 @@
-/* $Id: traps.c,v 1.85 2002/02/09 19:49:31 davem Exp $
- * arch/sparc64/kernel/traps.c
+/* arch/sparc64/kernel/traps.c
*
- * Copyright (C) 1995,1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995,1997 David S. Miller (davem@davemloft.net)
* Copyright (C) 1997,1999,2000 Jakub Jelinek (jakub@redhat.com)
*/
@@ -765,7 +764,7 @@
*/
struct cheetah_err_info *cheetah_error_log;
-static __inline__ struct cheetah_err_info *cheetah_get_error_log(unsigned long afsr)
+static inline struct cheetah_err_info *cheetah_get_error_log(unsigned long afsr)
{
struct cheetah_err_info *p;
int cpu = smp_processor_id();
@@ -1085,7 +1084,7 @@
};
/* Return the highest priority error conditon mentioned. */
-static __inline__ unsigned long cheetah_get_hipri(unsigned long afsr)
+static inline unsigned long cheetah_get_hipri(unsigned long afsr)
{
unsigned long tmp = 0;
int i;
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 100c445..e18ccf8 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -201,7 +201,7 @@
#define dcache_dirty_cpu(page) \
(((page)->flags >> PG_dcache_cpu_shift) & PG_dcache_cpu_mask)
-static __inline__ void set_dcache_dirty(struct page *page, int this_cpu)
+static inline void set_dcache_dirty(struct page *page, int this_cpu)
{
unsigned long mask = this_cpu;
unsigned long non_cpu_bits;
@@ -223,7 +223,7 @@
: "g1", "g7");
}
-static __inline__ void clear_dcache_dirty_cpu(struct page *page, unsigned long cpu)
+static inline void clear_dcache_dirty_cpu(struct page *page, unsigned long cpu)
{
unsigned long mask = (1UL << PG_dcache_dirty);
diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c
index 7ff0a02..a3e6e4b 100644
--- a/arch/sparc64/mm/tsb.c
+++ b/arch/sparc64/mm/tsb.c
@@ -182,7 +182,9 @@
break;
default:
- BUG();
+ printk(KERN_ERR "TSB[%s:%d]: Impossible TSB size %lu, killing process.\n",
+ current->comm, current->pid, tsb_bytes);
+ do_exit(SIGSEGV);
};
tte |= pte_sz_bits(page_sz);
diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S
index 737c269..2865c10 100644
--- a/arch/sparc64/mm/ultra.S
+++ b/arch/sparc64/mm/ultra.S
@@ -120,13 +120,6 @@
/*
* The following code flushes one page_size worth.
*/
-#if (PAGE_SHIFT == 13)
-#define ITAG_MASK 0xfe
-#elif (PAGE_SHIFT == 16)
-#define ITAG_MASK 0x7fe
-#else
-#error unsupported PAGE_SIZE
-#endif
.section .kprobes.text, "ax"
.align 32
.globl __flush_icache_page
diff --git a/arch/sparc64/prom/console.c b/arch/sparc64/prom/console.c
index 3fafa9a..e1c3fc8 100644
--- a/arch/sparc64/prom/console.c
+++ b/arch/sparc64/prom/console.c
@@ -1,8 +1,7 @@
-/* $Id: console.c,v 1.9 1997/10/29 07:41:43 ecd Exp $
- * console.c: Routines that deal with sending and receiving IO
+/* console.c: Routines that deal with sending and receiving IO
* to/from the current console device using the PROM.
*
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
* Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
@@ -19,7 +18,7 @@
/* Non blocking get character from console input device, returns -1
* if no input was taken. This can be used for polling.
*/
-__inline__ int
+inline int
prom_nbgetchar(void)
{
char inc;
@@ -35,7 +34,7 @@
/* Non blocking put character to console device, returns -1 if
* unsuccessful.
*/
-__inline__ int
+inline int
prom_nbputchar(char c)
{
char outc;
diff --git a/arch/sparc64/prom/tree.c b/arch/sparc64/prom/tree.c
index b2c5b12..a99ccd7 100644
--- a/arch/sparc64/prom/tree.c
+++ b/arch/sparc64/prom/tree.c
@@ -18,14 +18,12 @@
/* Return the child of node 'node' or zero if no this node has no
* direct descendent.
*/
-__inline__ int
-__prom_getchild(int node)
+inline int __prom_getchild(int node)
{
return p1275_cmd ("child", P1275_INOUT(1, 1), node);
}
-__inline__ int
-prom_getchild(int node)
+inline int prom_getchild(int node)
{
int cnode;
@@ -35,8 +33,7 @@
return (int)cnode;
}
-__inline__ int
-prom_getparent(int node)
+inline int prom_getparent(int node)
{
int cnode;
@@ -49,14 +46,12 @@
/* Return the next sibling of node 'node' or zero if no more siblings
* at this level of depth in the tree.
*/
-__inline__ int
-__prom_getsibling(int node)
+inline int __prom_getsibling(int node)
{
return p1275_cmd(prom_peer_name, P1275_INOUT(1, 1), node);
}
-__inline__ int
-prom_getsibling(int node)
+inline int prom_getsibling(int node)
{
int sibnode;
@@ -72,8 +67,7 @@
/* Return the length in bytes of property 'prop' at node 'node'.
* Return -1 on error.
*/
-__inline__ int
-prom_getproplen(int node, const char *prop)
+inline int prom_getproplen(int node, const char *prop)
{
if((!node) || (!prop)) return -1;
return p1275_cmd ("getproplen",
@@ -86,8 +80,8 @@
* 'buffer' which has a size of 'bufsize'. If the acquisition
* was successful the length will be returned, else -1 is returned.
*/
-__inline__ int
-prom_getproperty(int node, const char *prop, char *buffer, int bufsize)
+inline int prom_getproperty(int node, const char *prop,
+ char *buffer, int bufsize)
{
int plen;
@@ -107,8 +101,7 @@
/* Acquire an integer property and return its value. Returns -1
* on failure.
*/
-__inline__ int
-prom_getint(int node, const char *prop)
+inline int prom_getint(int node, const char *prop)
{
int intprop;
@@ -122,8 +115,7 @@
* integer.
*/
-int
-prom_getintdefault(int node, const char *property, int deflt)
+int prom_getintdefault(int node, const char *property, int deflt)
{
int retval;
@@ -134,8 +126,7 @@
}
/* Acquire a boolean property, 1=TRUE 0=FALSE. */
-int
-prom_getbool(int node, const char *prop)
+int prom_getbool(int node, const char *prop)
{
int retval;
@@ -148,8 +139,7 @@
* string on error. The char pointer is the user supplied string
* buffer.
*/
-void
-prom_getstring(int node, const char *prop, char *user_buf, int ubuf_size)
+void prom_getstring(int node, const char *prop, char *user_buf, int ubuf_size)
{
int len;
@@ -163,8 +153,7 @@
/* Does the device at node 'node' have name 'name'?
* YES = 1 NO = 0
*/
-int
-prom_nodematch(int node, const char *name)
+int prom_nodematch(int node, const char *name)
{
char namebuf[128];
prom_getproperty(node, "name", namebuf, sizeof(namebuf));
@@ -175,8 +164,7 @@
/* Search siblings at 'node_start' for a node with name
* 'nodename'. Return node if successful, zero if not.
*/
-int
-prom_searchsiblings(int node_start, const char *nodename)
+int prom_searchsiblings(int node_start, const char *nodename)
{
int thisnode, error;
@@ -197,8 +185,7 @@
/* Return the first property type for node 'node'.
* buffer should be at least 32B in length
*/
-__inline__ char *
-prom_firstprop(int node, char *buffer)
+inline char *prom_firstprop(int node, char *buffer)
{
*buffer = 0;
if(node == -1) return buffer;
@@ -212,8 +199,7 @@
* at node 'node' . Returns NULL string if no more
* property types for this node.
*/
-__inline__ char *
-prom_nextprop(int node, const char *oprop, char *buffer)
+inline char *prom_nextprop(int node, const char *oprop, char *buffer)
{
char buf[32];
@@ -279,8 +265,7 @@
node, pname, value, P1275_SIZE(size));
}
-__inline__ int
-prom_inst2pkg(int inst)
+inline int prom_inst2pkg(int inst)
{
int node;
diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386
index 9876d80..e0ac74e 100644
--- a/arch/um/Kconfig.i386
+++ b/arch/um/Kconfig.i386
@@ -1,6 +1,6 @@
menu "Host processor type and features"
-source "arch/i386/Kconfig.cpu"
+source "arch/x86/Kconfig.cpu"
endmenu
diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386
index 0178df3..b01dfb0 100644
--- a/arch/um/Makefile-i386
+++ b/arch/um/Makefile-i386
@@ -9,6 +9,7 @@
ELF_FORMAT := elf32-$(SUBARCH)
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
HEADER_ARCH := x86
+CHECKFLAGS += -D__i386__
ifeq ("$(origin SUBARCH)", "command line")
ifneq ("$(shell uname -m | sed -e s/i.86/i386/)", "$(SUBARCH)")
@@ -26,10 +27,8 @@
CONFIG_X86_32 := y
export CONFIG_X86_32
-ARCH_KERNEL_DEFINES += -U__$(SUBARCH)__ -U$(SUBARCH)
-
# First of all, tune CFLAGS for the specific CPU. This actually sets cflags-y.
-include $(srctree)/arch/i386/Makefile.cpu
+include $(srctree)/arch/x86/Makefile_32.cpu
# prevent gcc from keeping the stack 16 byte aligned. Taken from i386.
cflags-y += $(call cc-option,-mpreferred-stack-boundary=2)
diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64
index fe5316f..8ed362f 100644
--- a/arch/um/Makefile-x86_64
+++ b/arch/um/Makefile-x86_64
@@ -6,12 +6,9 @@
_extra_flags_ = -fno-builtin -m64
-#We #undef __x86_64__ for kernelspace, not for userspace where
-#it's needed for headers to work!
-ARCH_KERNEL_DEFINES = -U__$(SUBARCH)__
KBUILD_CFLAGS += $(_extra_flags_)
-CHECKFLAGS += -m64
+CHECKFLAGS += -m64 -D__x86_64__
KBUILD_AFLAGS += -m64
LDFLAGS += -m elf_x86_64
KBUILD_CPPFLAGS += -m64
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 3a8cd3d..e184b44 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -35,6 +35,7 @@
#include "linux/genhd.h"
#include "linux/spinlock.h"
#include "linux/platform_device.h"
+#include "linux/scatterlist.h"
#include "asm/segment.h"
#include "asm/uaccess.h"
#include "asm/irq.h"
@@ -704,6 +705,7 @@
ubd_dev->size = ROUND_BLOCK(ubd_dev->size);
INIT_LIST_HEAD(&ubd_dev->restart);
+ sg_init_table(&ubd_dev->sg, MAX_SG);
err = -ENOMEM;
ubd_dev->queue = blk_init_queue(do_ubd_request, &ubd_dev->lock);
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index 8456397..59822dee 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -165,7 +165,7 @@
kmap_prot = PAGE_KERNEL;
}
-static void init_highmem(void)
+static void __init init_highmem(void)
{
pgd_t *pgd;
pud_t *pud;
diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c
index 9657c89..bd3da8a 100644
--- a/arch/um/sys-i386/ptrace.c
+++ b/arch/um/sys-i386/ptrace.c
@@ -155,7 +155,7 @@
if (err)
return err;
- n = copy_to_user((void *) buf, fpregs, sizeof(fpregs));
+ n = copy_to_user(buf, fpregs, sizeof(fpregs));
if(n > 0)
return -EFAULT;
@@ -168,7 +168,7 @@
long fpregs[HOST_FP_SIZE];
BUG_ON(sizeof(*buf) != sizeof(fpregs));
- n = copy_from_user(fpregs, (void *) buf, sizeof(fpregs));
+ n = copy_from_user(fpregs, buf, sizeof(fpregs));
if (n > 0)
return -EFAULT;
@@ -185,7 +185,7 @@
if (err)
return err;
- n = copy_to_user((void *) buf, fpregs, sizeof(fpregs));
+ n = copy_to_user(buf, fpregs, sizeof(fpregs));
if(n > 0)
return -EFAULT;
@@ -198,7 +198,7 @@
long fpregs[HOST_XFP_SIZE];
BUG_ON(sizeof(*buf) != sizeof(fpregs));
- n = copy_from_user(fpregs, (void *) buf, sizeof(fpregs));
+ n = copy_from_user(fpregs, buf, sizeof(fpregs));
if (n > 0)
return -EFAULT;
diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c
index a3cfeed..b7631b0 100644
--- a/arch/um/sys-x86_64/ptrace.c
+++ b/arch/um/sys-x86_64/ptrace.c
@@ -154,7 +154,7 @@
if (err)
return err;
- n = copy_to_user((void *) buf, fpregs, sizeof(fpregs));
+ n = copy_to_user(buf, fpregs, sizeof(fpregs));
if(n > 0)
return -EFAULT;
@@ -167,7 +167,7 @@
long fpregs[HOST_FP_SIZE];
BUG_ON(sizeof(*buf) != sizeof(fpregs));
- n = copy_from_user(fpregs, (void *) buf, sizeof(fpregs));
+ n = copy_from_user(fpregs, buf, sizeof(fpregs));
if (n > 0)
return -EFAULT;
diff --git a/arch/i386/Kconfig.cpu b/arch/x86/Kconfig.cpu
similarity index 100%
rename from arch/i386/Kconfig.cpu
rename to arch/x86/Kconfig.cpu
diff --git a/arch/i386/Kconfig.debug b/arch/x86/Kconfig.debug
similarity index 65%
rename from arch/i386/Kconfig.debug
rename to arch/x86/Kconfig.debug
index f03531e..761ca7b 100644
--- a/arch/i386/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -1,13 +1,12 @@
menu "Kernel hacking"
config TRACE_IRQFLAGS_SUPPORT
- bool
- default y
+ def_bool y
source "lib/Kconfig.debug"
config EARLY_PRINTK
- bool "Early printk" if EMBEDDED && DEBUG_KERNEL
+ bool "Early printk" if EMBEDDED && DEBUG_KERNEL && X86_32
default y
help
Write kernel log output directly into the VGA buffer or to a serial
@@ -37,10 +36,12 @@
comment "Page alloc debug is incompatible with Software Suspend on i386"
depends on DEBUG_KERNEL && HIBERNATION
+ depends on X86_32
config DEBUG_PAGEALLOC
bool "Debug page memory allocations"
depends on DEBUG_KERNEL && !HIBERNATION && !HUGETLBFS
+ depends on X86_32
help
Unmap pages from the kernel linear mapping after free_pages().
This results in a large slowdown, but helps to find certain types
@@ -59,6 +60,7 @@
config 4KSTACKS
bool "Use 4Kb for kernel stacks instead of 8Kb"
depends on DEBUG_KERNEL
+ depends on X86_32
help
If you say Y here the kernel will use a 4Kb stacksize for the
kernel stack attached to each process/thread. This facilitates
@@ -67,22 +69,47 @@
will also use IRQ stacks to compensate for the reduced stackspace.
config X86_FIND_SMP_CONFIG
- bool
+ def_bool y
depends on X86_LOCAL_APIC || X86_VOYAGER
- default y
+ depends on X86_32
config X86_MPPARSE
- bool
+ def_bool y
depends on X86_LOCAL_APIC && !X86_VISWS
- default y
+ depends on X86_32
config DOUBLEFAULT
default y
bool "Enable doublefault exception handler" if EMBEDDED
+ depends on X86_32
help
- This option allows trapping of rare doublefault exceptions that
- would otherwise cause a system to silently reboot. Disabling this
- option saves about 4k and might cause you much additional grey
- hair.
+ This option allows trapping of rare doublefault exceptions that
+ would otherwise cause a system to silently reboot. Disabling this
+ option saves about 4k and might cause you much additional grey
+ hair.
+
+config IOMMU_DEBUG
+ bool "Enable IOMMU debugging"
+ depends on GART_IOMMU && DEBUG_KERNEL
+ depends on X86_64
+ help
+ Force the IOMMU to on even when you have less than 4GB of
+ memory and add debugging code. On overflow always panic. And
+ allow to enable IOMMU leak tracing. Can be disabled at boot
+ time with iommu=noforce. This will also enable scatter gather
+ list merging. Currently not recommended for production
+ code. When you use it make sure you have a big enough
+ IOMMU/AGP aperture. Most of the options enabled by this can
+ be set more finegrained using the iommu= command line
+ options. See Documentation/x86_64/boot-options.txt for more
+ details.
+
+config IOMMU_LEAK
+ bool "IOMMU leak tracing"
+ depends on DEBUG_KERNEL
+ depends on IOMMU_DEBUG
+ help
+ Add a simple leak tracer to the IOMMU code. This is useful when you
+ are debugging a buggy device driver that leaks IOMMU mappings.
endmenu
diff --git a/arch/i386/Kconfig b/arch/x86/Kconfig.i386
similarity index 99%
rename from arch/i386/Kconfig
rename to arch/x86/Kconfig.i386
index b4437ce..7331efe 100644
--- a/arch/i386/Kconfig
+++ b/arch/x86/Kconfig.i386
@@ -287,7 +287,7 @@
default y
depends on SMP && X86_ES7000 && MPENTIUMIII
-source "arch/i386/Kconfig.cpu"
+source "arch/x86/Kconfig.cpu"
config HPET_TIMER
bool "HPET Timer Support"
@@ -1272,7 +1272,7 @@
source "kernel/Kconfig.instrumentation"
-source "arch/i386/Kconfig.debug"
+source "arch/x86/Kconfig.debug"
source "security/Kconfig"
diff --git a/arch/x86_64/Kconfig b/arch/x86/Kconfig.x86_64
similarity index 98%
rename from arch/x86_64/Kconfig
rename to arch/x86/Kconfig.x86_64
index 308970a..cc468ea 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86/Kconfig.x86_64
@@ -97,10 +97,6 @@
bool
default y
-config EARLY_PRINTK
- bool
- default y
-
config GENERIC_ISA_DMA
bool
default y
@@ -479,8 +475,8 @@
# Mark as embedded because too many people got it wrong.
# The code disables itself when not needed.
-config IOMMU
- bool "IOMMU support" if EMBEDDED
+config GART_IOMMU
+ bool "GART IOMMU support" if EMBEDDED
default y
select SWIOTLB
select AGP
@@ -687,7 +683,7 @@
config K8_NB
def_bool y
- depends on AGP_AMD64 || IOMMU || (PCI && NUMA)
+ depends on AGP_AMD64 || GART_IOMMU || (PCI && NUMA)
endmenu
@@ -753,7 +749,6 @@
config DMAR
bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
depends on PCI_MSI && ACPI && EXPERIMENTAL
- default y
help
DMA remapping (DMAR) devices support enables independent address
translations for Direct Memory Access (DMA) from devices.
@@ -835,7 +830,7 @@
source "kernel/Kconfig.instrumentation"
-source "arch/x86_64/Kconfig.debug"
+source "arch/x86/Kconfig.debug"
source "security/Kconfig"
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
new file mode 100644
index 0000000..3095973
--- /dev/null
+++ b/arch/x86/Makefile
@@ -0,0 +1,16 @@
+# Unified Makefile for i386 and x86_64
+
+# select defconfig based on actual architecture
+KBUILD_DEFCONFIG := $(ARCH)_defconfig
+
+# # No need to remake these files
+$(srctree)/arch/x86/Makefile%: ;
+
+ifeq ($(ARCH),i386)
+ include $(srctree)/arch/x86/Makefile_32
+else
+ include $(srctree)/arch/x86/Makefile_64
+endif
+
+
+
diff --git a/arch/i386/Makefile b/arch/x86/Makefile_32
similarity index 97%
rename from arch/i386/Makefile
rename to arch/x86/Makefile_32
index f5b9a37..346ac07 100644
--- a/arch/i386/Makefile
+++ b/arch/x86/Makefile_32
@@ -1,5 +1,5 @@
#
-# i386/Makefile
+# i386 Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
@@ -17,9 +17,6 @@
# 20050320 Kianusch Sayah Karadji <kianusch@sk-tech.net>
# Added support for GEODE CPU
-# Fill in SRCARCH
-SRCARCH := x86
-
# BITS is used as extension for files which are available in a 32 bit
# and a 64 bit version to simplify shared Makefiles.
# e.g.: obj-y += foo_$(BITS).o
@@ -46,7 +43,7 @@
KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
# CPU-specific tuning. Anything which can be shared with UML should go here.
-include $(srctree)/arch/i386/Makefile.cpu
+include $(srctree)/arch/x86/Makefile_32.cpu
# temporary until string.h is fixed
cflags-y += -ffreestanding
diff --git a/arch/i386/Makefile.cpu b/arch/x86/Makefile_32.cpu
similarity index 100%
rename from arch/i386/Makefile.cpu
rename to arch/x86/Makefile_32.cpu
diff --git a/arch/x86_64/Makefile b/arch/x86/Makefile_64
similarity index 98%
rename from arch/x86_64/Makefile
rename to arch/x86/Makefile_64
index 20eb69b..57e714a 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86/Makefile_64
@@ -1,5 +1,5 @@
#
-# x86_64/Makefile
+# x86_64 Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
@@ -21,9 +21,6 @@
#
# $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $
-# Fill in SRCARCH
-SRCARCH := x86
-
# BITS is used as extension for files which are available in a 32 bit
# and a 64 bit version to simplify shared Makefiles.
# e.g.: obj-y += foo_$(BITS).o
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index 5f9a2e7..d2b5adf 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -17,6 +17,8 @@
#ifndef BOOT_BOOT_H
#define BOOT_BOOT_H
+#define STACK_SIZE 512 /* Minimum number of bytes for stack */
+
#ifndef __ASSEMBLY__
#include <stdarg.h>
@@ -198,8 +200,6 @@
}
/* Heap -- available for dynamic lists. */
-#define STACK_SIZE 512 /* Minimum number of bytes for stack */
-
extern char _end[];
extern char *HEAP;
extern char *heap_end;
@@ -216,9 +216,9 @@
#define GET_HEAP(type, n) \
((type *)__get_heap(sizeof(type),__alignof__(type),(n)))
-static inline int heap_free(void)
+static inline bool heap_free(size_t n)
{
- return heap_end-HEAP;
+ return (int)(heap_end-HEAP) >= (int)n;
}
/* copy.S */
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index a0ae2e7..036e635 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -33,24 +33,20 @@
.globl startup_32
startup_32:
- /* check to see if KEEP_SEGMENTS flag is meaningful */
- cmpw $0x207, BP_version(%esi)
- jb 1f
-
+ cld
/* test KEEP_SEGMENTS flag to see if the bootloader is asking
* us to not reload segments */
testb $(1<<6), BP_loadflags(%esi)
- jnz 2f
+ jnz 1f
-1: cli
+ cli
movl $(__BOOT_DS),%eax
movl %eax,%ds
movl %eax,%es
movl %eax,%fs
movl %eax,%gs
movl %eax,%ss
-
-2: cld
+1:
/* Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 4946764..1ccb38a 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -29,6 +29,7 @@
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/msr.h>
+#include <asm/asm-offsets.h>
.section ".text.head"
.code32
@@ -36,11 +37,17 @@
startup_32:
cld
+ /* test KEEP_SEGMENTS flag to see if the bootloader is asking
+ * us to not reload segments */
+ testb $(1<<6), BP_loadflags(%esi)
+ jnz 1f
+
cli
movl $(__KERNEL_DS), %eax
movl %eax, %ds
movl %eax, %es
movl %eax, %ss
+1:
/* Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 8353c81..6ef5a06 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -173,7 +173,8 @@
bootsect_kludge:
.long 0 # obsolete
-heap_end_ptr: .word _end+1024 # (Header version 0x0201 or later)
+heap_end_ptr: .word _end+STACK_SIZE-512
+ # (Header version 0x0201 or later)
# space from here (exclusive) down to
# end of setup code can be used by setup
# for local heap purposes.
@@ -230,28 +231,53 @@
int $0x13
#endif
-# We will have entered with %cs = %ds+0x20, normalize %cs so
-# it is on par with the other segments.
- pushw %ds
- pushw $setup2
- lretw
-
-setup2:
# Force %es = %ds
movw %ds, %ax
movw %ax, %es
cld
-# Stack paranoia: align the stack and make sure it is good
-# for both 16- and 32-bit references. In particular, if we
-# were meant to have been using the full 16-bit segment, the
-# caller might have set %sp to zero, which breaks %esp-based
-# references.
- andw $~3, %sp # dword align (might as well...)
- jnz 1f
- movw $0xfffc, %sp # Make sure we're not zero
-1: movzwl %sp, %esp # Clear upper half of %esp
- sti
+# Apparently some ancient versions of LILO invoked the kernel
+# with %ss != %ds, which happened to work by accident for the
+# old code. If the CAN_USE_HEAP flag is set in loadflags, or
+# %ss != %ds, then adjust the stack pointer.
+
+ # Smallest possible stack we can tolerate
+ movw $(_end+STACK_SIZE), %cx
+
+ movw heap_end_ptr, %dx
+ addw $512, %dx
+ jnc 1f
+ xorw %dx, %dx # Wraparound - whole segment available
+1: testb $CAN_USE_HEAP, loadflags
+ jnz 2f
+
+ # No CAN_USE_HEAP
+ movw %ss, %dx
+ cmpw %ax, %dx # %ds == %ss?
+ movw %sp, %dx
+ # If so, assume %sp is reasonably set, otherwise use
+ # the smallest possible stack.
+ jne 4f # -> Smallest possible stack...
+
+ # Make sure the stack is at least minimum size. Take a value
+ # of zero to mean "full segment."
+2:
+ andw $~3, %dx # dword align (might as well...)
+ jnz 3f
+ movw $0xfffc, %dx # Make sure we're not zero
+3: cmpw %cx, %dx
+ jnb 5f
+4: movw %cx, %dx # Minimum value we can possibly use
+5: movw %ax, %ss
+ movzwl %dx, %esp # Clear upper half of %esp
+ sti # Now we should have a working stack
+
+# We will have entered with %cs = %ds+0x20, normalize %cs so
+# it is on par with the other segments.
+ pushw %ds
+ pushw $6f
+ lretw
+6:
# Check signature at end of setup
cmpl $0x5a5aaa55, setup_sig
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index 68e65d9..ed0672a 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -79,7 +79,7 @@
video_bios.modes = GET_HEAP(struct mode_info, 0);
for (mode = 0x14; mode <= 0x7f; mode++) {
- if (heap_free() < sizeof(struct mode_info))
+ if (!heap_free(sizeof(struct mode_info)))
break;
if (mode_defined(VIDEO_FIRST_BIOS+mode))
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 1921907..4716b9a 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -57,7 +57,7 @@
while ((mode = rdfs16(mode_ptr)) != 0xffff) {
mode_ptr += 2;
- if (heap_free() < sizeof(struct mode_info))
+ if (!heap_free(sizeof(struct mode_info)))
break; /* Heap full, can't save mode info */
if (mode & ~0x1ff)
diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c
index e4ba897..ad9712f 100644
--- a/arch/x86/boot/video.c
+++ b/arch/x86/boot/video.c
@@ -371,7 +371,7 @@
saved.curx = boot_params.screen_info.orig_x;
saved.cury = boot_params.screen_info.orig_y;
- if (heap_free() < saved.x*saved.y*sizeof(u16)+512)
+ if (!heap_free(saved.x*saved.y*sizeof(u16)+512))
return; /* Not enough heap to save the screen */
saved.data = GET_HEAP(u16, saved.x*saved.y);
diff --git a/arch/i386/defconfig b/arch/x86/configs/i386_defconfig
similarity index 100%
rename from arch/i386/defconfig
rename to arch/x86/configs/i386_defconfig
diff --git a/arch/x86_64/defconfig b/arch/x86/configs/x86_64_defconfig
similarity index 99%
rename from arch/x86_64/defconfig
rename to arch/x86/configs/x86_64_defconfig
index b091c5e..38a83f9 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -170,7 +170,7 @@
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
-CONFIG_IOMMU=y
+CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
diff --git a/arch/x86/kernel/Makefile_64 b/arch/x86/kernel/Makefile_64
index 466337a..24671c3 100644
--- a/arch/x86/kernel/Makefile_64
+++ b/arch/x86/kernel/Makefile_64
@@ -25,7 +25,7 @@
obj-$(CONFIG_PM) += suspend_64.o
obj-$(CONFIG_HIBERNATION) += suspend_asm_64.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_IOMMU) += pci-gart_64.o aperture_64.o
+obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o
obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o
obj-$(CONFIG_KPROBES) += kprobes_64.o
diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c
index 2ed0a4c..f63e5ff 100644
--- a/arch/x86/kernel/acpi/processor.c
+++ b/arch/x86/kernel/acpi/processor.c
@@ -62,8 +62,7 @@
/* Initialize _PDC data based on the CPU vendor */
void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
{
- unsigned int cpu = pr->id;
- struct cpuinfo_x86 *c = &cpu_data(cpu);
+ struct cpuinfo_x86 *c = &cpu_data(pr->id);
pr->pdc = NULL;
if (c->x86_vendor == X86_VENDOR_INTEL)
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 8f681cae7..5b69927 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -20,14 +20,14 @@
#include <linux/ioport.h>
#include <asm/e820.h>
#include <asm/io.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/pci-direct.h>
#include <asm/dma.h>
#include <asm/k8.h>
-int iommu_aperture;
-int iommu_aperture_disabled __initdata = 0;
-int iommu_aperture_allowed __initdata = 0;
+int gart_iommu_aperture;
+int gart_iommu_aperture_disabled __initdata = 0;
+int gart_iommu_aperture_allowed __initdata = 0;
int fallback_aper_order __initdata = 1; /* 64MB */
int fallback_aper_force __initdata = 0;
@@ -204,14 +204,15 @@
return 0;
}
-void __init iommu_hole_init(void)
+void __init gart_iommu_hole_init(void)
{
int fix, num;
u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
u64 aper_base, last_aper_base = 0;
int valid_agp = 0;
- if (iommu_aperture_disabled || !fix_aperture || !early_pci_allowed())
+ if (gart_iommu_aperture_disabled || !fix_aperture ||
+ !early_pci_allowed())
return;
printk(KERN_INFO "Checking aperture...\n");
@@ -222,7 +223,7 @@
continue;
iommu_detected = 1;
- iommu_aperture = 1;
+ gart_iommu_aperture = 1;
aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7;
aper_size = (32 * 1024 * 1024) << aper_order;
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index 7e50bda..d1b6ed9 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -15,12 +15,16 @@
#include <asm/segment.h>
#include <asm/thread_info.h>
#include <asm/ia32.h>
+#include <asm/bootparam.h>
#define DEFINE(sym, val) \
asm volatile("\n->" #sym " %0 " #val : : "i" (val))
#define BLANK() asm volatile("\n->" : : )
+#define OFFSET(sym, str, mem) \
+ DEFINE(sym, offsetof(struct str, mem))
+
#define __NO_STUBS 1
#undef __SYSCALL
#undef _ASM_X86_64_UNISTD_H_
@@ -109,5 +113,11 @@
DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx));
BLANK();
DEFINE(__NR_syscall_max, sizeof(syscalls) - 1);
+
+ BLANK();
+ OFFSET(BP_scratch, boot_params, scratch);
+ OFFSET(BP_loadflags, boot_params, hdr.loadflags);
+ OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
+ OFFSET(BP_version, boot_params, hdr.version);
return 0;
}
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 2d42b41..066f8c6 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -49,7 +49,7 @@
/* Intel-defined (#2) */
"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
"tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
- NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt",
+ NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* VIA/Cyrix/Centaur-defined */
@@ -59,10 +59,10 @@
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* AMD-defined (#2) */
- "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy",
- "altmovcr8", "abm", "sse4a",
- "misalignsse", "3dnowprefetch",
- "osvw", "ibs", NULL, NULL, NULL, NULL,
+ "lahf_lm", "cmp_legacy", "svm", "extapic",
+ "cr8_legacy", "abm", "sse4a", "misalignsse",
+ "3dnowprefetch", "osvw", "ibs", "sse5",
+ "skinit", "wdt", NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index af0253f..8bb482f 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -25,7 +25,7 @@
#include <linux/kdebug.h>
#include <asm/smp.h>
-#ifdef X86_32
+#ifdef CONFIG_X86_32
#include <mach_ipi.h>
#else
#include <asm/mach_apic.h>
@@ -41,7 +41,7 @@
unsigned long val, void *data)
{
struct pt_regs *regs;
-#ifdef X86_32
+#ifdef CONFIG_X86_32
struct pt_regs fixed_regs;
#endif
int cpu;
@@ -60,7 +60,7 @@
return NOTIFY_STOP;
local_irq_disable();
-#ifdef X86_32
+#ifdef CONFIG_X86_32
if (!user_mode_vm(regs)) {
crash_fixup_ss_esp(&fixed_regs, regs);
regs = &fixed_regs;
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index dc34acb..88bb83e 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -17,30 +17,32 @@
#include <asm/io_apic.h>
#include <asm/apic.h>
-#ifdef CONFIG_IOMMU
-#include <asm/iommu.h>
+#ifdef CONFIG_GART_IOMMU
+#include <asm/gart.h>
#endif
static void __init via_bugs(void)
{
-#ifdef CONFIG_IOMMU
+#ifdef CONFIG_GART_IOMMU
if ((end_pfn > MAX_DMA32_PFN || force_iommu) &&
- !iommu_aperture_allowed) {
+ !gart_iommu_aperture_allowed) {
printk(KERN_INFO
"Looks like a VIA chipset. Disabling IOMMU."
" Override with iommu=allowed\n");
- iommu_aperture_disabled = 1;
+ gart_iommu_aperture_disabled = 1;
}
#endif
}
#ifdef CONFIG_ACPI
+#ifdef CONFIG_X86_IO_APIC
static int __init nvidia_hpet_check(struct acpi_table_header *header)
{
return 0;
}
-#endif
+#endif /* CONFIG_X86_IO_APIC */
+#endif /* CONFIG_ACPI */
static void __init nvidia_bugs(void)
{
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 0d8577f..aa3d2c8 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -233,6 +233,8 @@
void arch_crash_save_vmcoreinfo(void)
{
+ VMCOREINFO_SYMBOL(init_level4_pgt);
+
#ifdef CONFIG_ARCH_DISCONTIGMEM_ENABLE
VMCOREINFO_SYMBOL(node_data);
VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 1a20fe31..6bf1f71 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -36,7 +36,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/scatterlist.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/calgary.h>
#include <asm/tce.h>
#include <asm/pci-direct.h>
diff --git a/arch/x86/kernel/pci-dma_64.c b/arch/x86/kernel/pci-dma_64.c
index 393e272..aa805b1 100644
--- a/arch/x86/kernel/pci-dma_64.c
+++ b/arch/x86/kernel/pci-dma_64.c
@@ -9,7 +9,7 @@
#include <linux/module.h>
#include <linux/dmar.h>
#include <asm/io.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/calgary.h>
int iommu_merge __read_mostly = 1;
@@ -275,7 +275,7 @@
swiotlb = 1;
#endif
-#ifdef CONFIG_IOMMU
+#ifdef CONFIG_GART_IOMMU
gart_parse_options(p);
#endif
@@ -298,8 +298,8 @@
* The order of these functions is important for
* fall-back/fail-over reasons
*/
-#ifdef CONFIG_IOMMU
- iommu_hole_init();
+#ifdef CONFIG_GART_IOMMU
+ gart_iommu_hole_init();
#endif
#ifdef CONFIG_CALGARY_IOMMU
@@ -321,7 +321,7 @@
intel_iommu_init();
-#ifdef CONFIG_IOMMU
+#ifdef CONFIG_GART_IOMMU
gart_iommu_init();
#endif
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index c56e9ee..06bcba5 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -30,17 +30,17 @@
#include <asm/mtrr.h>
#include <asm/pgtable.h>
#include <asm/proto.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/cacheflush.h>
#include <asm/swiotlb.h>
#include <asm/dma.h>
#include <asm/k8.h>
-unsigned long iommu_bus_base; /* GART remapping area (physical) */
+static unsigned long iommu_bus_base; /* GART remapping area (physical) */
static unsigned long iommu_size; /* size of remapping area bytes */
static unsigned long iommu_pages; /* .. and in pages */
-u32 *iommu_gatt_base; /* Remapping table */
+static u32 *iommu_gatt_base; /* Remapping table */
/* If this is disabled the IOMMU will use an optimized flushing strategy
of only flushing when an mapping is reused. With it true the GART is flushed
@@ -135,8 +135,8 @@
/* Debugging aid for drivers that don't free their IOMMU tables */
static void **iommu_leak_tab;
static int leak_trace;
-int iommu_leak_pages = 20;
-void dump_leak(void)
+static int iommu_leak_pages = 20;
+static void dump_leak(void)
{
int i;
static int dump;
@@ -338,7 +338,6 @@
BUG_ON(s != start && s->offset);
if (s == start) {
- *sout = *s;
sout->dma_address = iommu_bus_base;
sout->dma_address += iommu_page*PAGE_SIZE + s->offset;
sout->dma_length = s->length;
@@ -365,7 +364,7 @@
{
if (!need) {
BUG_ON(nelems != 1);
- *sout = *start;
+ sout->dma_address = start->dma_address;
sout->dma_length = start->length;
return 0;
}
@@ -436,7 +435,7 @@
error:
flush_gart();
- gart_unmap_sg(dev, sg, nents, dir);
+ gart_unmap_sg(dev, sg, out, dir);
/* When it was forced or merged try again in a dumb way */
if (force_iommu || iommu_merge) {
out = dma_map_sg_nonforce(dev, sg, nents, dir);
@@ -628,12 +627,12 @@
return;
/* Did we detect a different HW IOMMU? */
- if (iommu_detected && !iommu_aperture)
+ if (iommu_detected && !gart_iommu_aperture)
return;
if (no_iommu ||
(!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
- !iommu_aperture ||
+ !gart_iommu_aperture ||
(no_agp && init_k8_gatt(&info) < 0)) {
if (end_pfn > MAX_DMA32_PFN) {
printk(KERN_ERR "WARNING more than 4GB of memory "
@@ -734,9 +733,9 @@
fix_aperture = 0;
/* duplicated from pci-dma.c */
if (!strncmp(p,"force",5))
- iommu_aperture_allowed = 1;
+ gart_iommu_aperture_allowed = 1;
if (!strncmp(p,"allowed",7))
- iommu_aperture_allowed = 1;
+ gart_iommu_aperture_allowed = 1;
if (!strncmp(p, "memaper", 7)) {
fallback_aper_force = 1;
p += 7;
diff --git a/arch/x86/kernel/pci-nommu_64.c b/arch/x86/kernel/pci-nommu_64.c
index faf70bd..ab08e18 100644
--- a/arch/x86/kernel/pci-nommu_64.c
+++ b/arch/x86/kernel/pci-nommu_64.c
@@ -7,7 +7,7 @@
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/processor.h>
#include <asm/dma.h>
diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c
index b2f405e..102866d 100644
--- a/arch/x86/kernel/pci-swiotlb_64.c
+++ b/arch/x86/kernel/pci-swiotlb_64.c
@@ -5,7 +5,7 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include <asm/swiotlb.h>
#include <asm/dma.h>
diff --git a/arch/x86/kernel/reboot_64.c b/arch/x86/kernel/reboot_64.c
index 776eb06..71b13c5 100644
--- a/arch/x86/kernel/reboot_64.c
+++ b/arch/x86/kernel/reboot_64.c
@@ -17,7 +17,7 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/apic.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
/*
* Power off function, if any
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index cc0e914..e1e18c34 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -86,9 +86,6 @@
/* for MCA, but anyone else can use it if they want */
unsigned int machine_id;
-#ifdef CONFIG_MCA
-EXPORT_SYMBOL(machine_id);
-#endif
unsigned int machine_submodel_id;
unsigned int BIOS_revision;
unsigned int mca_pentium_flag;
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index e7a9e36..238633d 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -1040,7 +1040,7 @@
/* Intel-defined (#2) */
"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
"tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
- NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt",
+ NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* VIA/Cyrix/Centaur-defined */
@@ -1050,10 +1050,10 @@
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* AMD-defined (#2) */
- "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy",
- "altmovcr8", "abm", "sse4a",
- "misalignsse", "3dnowprefetch",
- "osvw", "ibs", NULL, NULL, NULL, NULL,
+ "lahf_lm", "cmp_legacy", "svm", "extapic",
+ "cr8_legacy", "abm", "sse4a", "misalignsse",
+ "3dnowprefetch", "osvw", "ibs", "sse5",
+ "skinit", "wdt", NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
diff --git a/arch/x86/kernel/smp_32.c b/arch/x86/kernel/smp_32.c
index f321153..fcaa026 100644
--- a/arch/x86/kernel/smp_32.c
+++ b/arch/x86/kernel/smp_32.c
@@ -708,10 +708,4 @@
.smp_send_reschedule = native_smp_send_reschedule,
.smp_call_function_mask = native_smp_call_function_mask,
};
-
-int smp_call_function_mask(cpumask_t mask, void (*func) (void *info),
- void *info, int wait)
-{
- return smp_ops.smp_call_function_mask(mask, func, info, wait);
-}
-EXPORT_SYMBOL(smp_call_function_mask);
+EXPORT_SYMBOL_GPL(smp_ops);
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index d2235db..a55b090 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -56,6 +56,7 @@
#include <linux/lguest.h>
#include <linux/lguest_launcher.h>
#include <linux/virtio_console.h>
+#include <linux/pm.h>
#include <asm/paravirt.h>
#include <asm/param.h>
#include <asm/page.h>
@@ -98,7 +99,7 @@
* When lazy_mode is set, it means we're allowed to defer all hypercalls and do
* them as a batch when lazy_mode is eventually turned off. Because hypercalls
* are reasonably expensive, batching them up makes sense. For example, a
- * large mmap might update dozens of page table entries: that code calls
+ * large munmap might update dozens of page table entries: that code calls
* paravirt_enter_lazy_mmu(), does the dozen updates, then calls
* lguest_leave_lazy_mode().
*
@@ -163,8 +164,8 @@
/*:*/
/*G:033
- * Here are our first native-instruction replacements: four functions for
- * interrupt control.
+ * After that diversion we return to our first native-instruction
+ * replacements: four functions for interrupt control.
*
* The simplest way of implementing these would be to have "turn interrupts
* off" and "turn interrupts on" hypercalls. Unfortunately, this is too slow:
@@ -183,7 +184,7 @@
return lguest_data.irq_enabled;
}
-/* "restore_flags" just sets the flags back to the value given. */
+/* restore_flags() just sets the flags back to the value given. */
static void restore_fl(unsigned long flags)
{
lguest_data.irq_enabled = flags;
@@ -356,7 +357,7 @@
* it. The Host needs to know when the Guest wants to change them, so we have
* a whole series of functions like read_cr0() and write_cr0().
*
- * We start with CR0. CR0 allows you to turn on and off all kinds of basic
+ * We start with cr0. cr0 allows you to turn on and off all kinds of basic
* features, but Linux only really cares about one: the horrifically-named Task
* Switched (TS) bit at bit 3 (ie. 8)
*
@@ -371,8 +372,7 @@
static unsigned long current_cr0, current_cr3;
static void lguest_write_cr0(unsigned long val)
{
- /* 8 == TS bit. */
- lazy_hcall(LHCALL_TS, val & 8, 0, 0);
+ lazy_hcall(LHCALL_TS, val & X86_CR0_TS, 0, 0);
current_cr0 = val;
}
@@ -387,10 +387,10 @@
static void lguest_clts(void)
{
lazy_hcall(LHCALL_TS, 0, 0, 0);
- current_cr0 &= ~8U;
+ current_cr0 &= ~X86_CR0_TS;
}
-/* CR2 is the virtual address of the last page fault, which the Guest only ever
+/* cr2 is the virtual address of the last page fault, which the Guest only ever
* reads. The Host kindly writes this into our "struct lguest_data", so we
* just read it out of there. */
static unsigned long lguest_read_cr2(void)
@@ -398,7 +398,7 @@
return lguest_data.cr2;
}
-/* CR3 is the current toplevel pagetable page: the principle is the same as
+/* cr3 is the current toplevel pagetable page: the principle is the same as
* cr0. Keep a local copy, and tell the Host when it changes. */
static void lguest_write_cr3(unsigned long cr3)
{
@@ -411,7 +411,7 @@
return current_cr3;
}
-/* CR4 is used to enable and disable PGE, but we don't care. */
+/* cr4 is used to enable and disable PGE, but we don't care. */
static unsigned long lguest_read_cr4(void)
{
return 0;
@@ -432,7 +432,7 @@
* maps virtual addresses to physical addresses using "page tables". We could
* use one huge index of 1 million entries: each address is 4 bytes, so that's
* 1024 pages just to hold the page tables. But since most virtual addresses
- * are unused, we use a two level index which saves space. The CR3 register
+ * are unused, we use a two level index which saves space. The cr3 register
* contains the physical address of the top level "page directory" page, which
* contains physical addresses of up to 1024 second-level pages. Each of these
* second level pages contains up to 1024 physical addresses of actual pages,
@@ -440,7 +440,7 @@
*
* Here's a diagram, where arrows indicate physical addresses:
*
- * CR3 ---> +---------+
+ * cr3 ---> +---------+
* | --------->+---------+
* | | | PADDR1 |
* Top-level | | PADDR2 |
@@ -498,8 +498,7 @@
*
* ... except in early boot when the kernel sets up the initial pagetables,
* which makes booting astonishingly slow. So we don't even tell the Host
- * anything changed until we've done the first page table switch.
- */
+ * anything changed until we've done the first page table switch. */
static void lguest_set_pte(pte_t *ptep, pte_t pteval)
{
*ptep = pteval;
@@ -720,10 +719,10 @@
/* Set up the timer interrupt (0) to go to our simple timer routine */
set_irq_handler(0, lguest_time_irq);
- /* Our clock structure look like arch/i386/kernel/tsc.c if we can use
- * the TSC, otherwise it's a dumb nanosecond-resolution clock. Either
- * way, the "rating" is initialized so high that it's always chosen
- * over any other clocksource. */
+ /* Our clock structure looks like arch/x86/kernel/tsc_32.c if we can
+ * use the TSC, otherwise it's a dumb nanosecond-resolution clock.
+ * Either way, the "rating" is set so high that it's always chosen over
+ * any other clocksource. */
if (lguest_data.tsc_khz)
lguest_clock.mult = clocksource_khz2mult(lguest_data.tsc_khz,
lguest_clock.shift);
@@ -749,7 +748,7 @@
* to work. They're pretty simple.
*/
-/* The Guest needs to tell the host what stack it expects traps to use. For
+/* The Guest needs to tell the Host what stack it expects traps to use. For
* native hardware, this is part of the Task State Segment mentioned above in
* lguest_load_tr_desc(), but to help hypervisors there's this special call.
*
@@ -850,13 +849,16 @@
return "LGUEST";
}
-/* Before virtqueues are set up, we use LHCALL_NOTIFY on normal memory to
- * produce console output. */
+/* We will eventually use the virtio console device to produce console output,
+ * but before that is set up we use LHCALL_NOTIFY on normal memory to produce
+ * console output. */
static __init int early_put_chars(u32 vtermno, const char *buf, int count)
{
char scratch[17];
unsigned int len = count;
+ /* We use a nul-terminated string, so we have to make a copy. Icky,
+ * huh? */
if (len > sizeof(scratch) - 1)
len = sizeof(scratch) - 1;
scratch[len] = '\0';
@@ -883,7 +885,7 @@
* Our current solution is to allow the paravirt back end to optionally patch
* over the indirect calls to replace them with something more efficient. We
* patch the four most commonly called functions: disable interrupts, enable
- * interrupts, restore interrupts and save interrupts. We usually have 10
+ * interrupts, restore interrupts and save interrupts. We usually have 6 or 10
* bytes to patch into: the Guest versions of these operations are small enough
* that we can fit comfortably.
*
@@ -1015,7 +1017,7 @@
asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
/* The Host uses the top of the Guest's virtual address space for the
- * Host<->Guest Switcher, and it tells us how much it needs in
+ * Host<->Guest Switcher, and it tells us how big that is in
* lguest_data.reserve_mem, set up on the LGUEST_INIT hypercall. */
reserve_top_address(lguest_data.reserve_mem);
@@ -1065,6 +1067,6 @@
/*
* This marks the end of stage II of our journey, The Guest.
*
- * It is now time for us to explore the nooks and crannies of the three Guest
- * devices and complete our understanding of the Guest in "make Drivers".
+ * It is now time for us to explore the layer of virtual drivers and complete
+ * our understanding of the Guest in "make Drivers".
*/
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index ebc6ac7..95b6fbc 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -6,7 +6,7 @@
#include <asm/processor-flags.h>
/*G:020 This is where we begin: head.S notes that the boot header's platform
- * type field is "1" (lguest), so calls us here. The boot header is in %esi.
+ * type field is "1" (lguest), so calls us here.
*
* WARNING: be very careful here! We're running at addresses equal to physical
* addesses (around 0), not above PAGE_OFFSET as most code expectes
@@ -17,13 +17,15 @@
* boot. */
.section .init.text, "ax", @progbits
ENTRY(lguest_entry)
- /* Make initial hypercall now, so we can set up the pagetables. */
+ /* We make the "initialization" hypercall now to tell the Host about
+ * us, and also find out where it put our page tables. */
movl $LHCALL_LGUEST_INIT, %eax
movl $lguest_data - __PAGE_OFFSET, %edx
int $LGUEST_TRAP_ENTRY
/* The Host put the toplevel pagetable in lguest_data.pgdir. The movsl
- * instruction uses %esi implicitly. */
+ * instruction uses %esi implicitly as the source for the copy we'
+ * about to do. */
movl lguest_data - __PAGE_OFFSET + LGUEST_DATA_pgdir, %esi
/* Copy first 32 entries of page directory to __PAGE_OFFSET entries.
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 361ac51..6937143 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -29,14 +29,14 @@
#include <asm/arch_hooks.h>
/* TLB state -- visible externally, indexed physically */
-DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_mm, 0 };
+DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { &init_mm, 0 };
/* CPU IRQ affinity -- set to all ones initially */
static unsigned long cpu_irq_affinity[NR_CPUS] __cacheline_aligned = { [0 ... NR_CPUS-1] = ~0UL };
/* per CPU data structure (for /proc/cpuinfo et al), visible externally
* indexed physically */
-DEFINE_PER_CPU(cpuinfo_x86, cpu_info) __cacheline_aligned;
+DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
EXPORT_PER_CPU_SYMBOL(cpu_info);
/* physical ID of the CPU used to boot the system */
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index fe608a4..13a474d 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -40,7 +40,7 @@
struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
-bootmem_data_t node0_bdata;
+static bootmem_data_t node0_bdata;
/*
* numa interface - we expect the numa architecture specific code to have
@@ -404,7 +404,7 @@
}
#ifdef CONFIG_MEMORY_HOTPLUG
-int paddr_to_nid(u64 addr)
+static int paddr_to_nid(u64 addr)
{
int nid;
unsigned long pfn = PFN_DOWN(addr);
diff --git a/arch/x86/mm/fault_32.c b/arch/x86/mm/fault_32.c
index 2e542e8..a2273d4 100644
--- a/arch/x86/mm/fault_32.c
+++ b/arch/x86/mm/fault_32.c
@@ -555,7 +555,7 @@
page &= PAGE_MASK;
page = ((__typeof__(page) *) __va(page))[(address >> PMD_SHIFT)
& (PTRS_PER_PMD - 1)];
- printk(KERN_ALERT "*pde = %016Lx ", page);
+ printk(KERN_CONT "*pde = %016Lx ", page);
page &= ~_PAGE_NX;
}
#else
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 1e3862e..a7308b2 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -728,12 +728,6 @@
return (addr >= VSYSCALL_START) && (addr < VSYSCALL_END);
}
-void * __init alloc_bootmem_high_node(pg_data_t *pgdat, unsigned long size)
-{
- return __alloc_bootmem_core(pgdat->bdata, size,
- SMP_CACHE_BYTES, (4UL*1024*1024*1024), 0);
-}
-
const char *arch_vma_name(struct vm_area_struct *vma)
{
if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
diff --git a/arch/x86_64/.gitignore b/arch/x86_64/.gitignore
deleted file mode 100644
index 36ef4c3..0000000
--- a/arch/x86_64/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-boot
diff --git a/arch/x86_64/Kconfig.debug b/arch/x86_64/Kconfig.debug
deleted file mode 100644
index 775d211..0000000
--- a/arch/x86_64/Kconfig.debug
+++ /dev/null
@@ -1,61 +0,0 @@
-menu "Kernel hacking"
-
-config TRACE_IRQFLAGS_SUPPORT
- bool
- default y
-
-source "lib/Kconfig.debug"
-
-config DEBUG_RODATA
- bool "Write protect kernel read-only data structures"
- depends on DEBUG_KERNEL
- help
- Mark the kernel read-only data as write-protected in the pagetables,
- in order to catch accidental (and incorrect) writes to such const data.
- This option may have a slight performance impact because a portion
- of the kernel code won't be covered by a 2MB TLB anymore.
- If in doubt, say "N".
-
-config IOMMU_DEBUG
- depends on IOMMU && DEBUG_KERNEL
- bool "Enable IOMMU debugging"
- help
- Force the IOMMU to on even when you have less than 4GB of
- memory and add debugging code. On overflow always panic. And
- allow to enable IOMMU leak tracing. Can be disabled at boot
- time with iommu=noforce. This will also enable scatter gather
- list merging. Currently not recommended for production
- code. When you use it make sure you have a big enough
- IOMMU/AGP aperture. Most of the options enabled by this can
- be set more finegrained using the iommu= command line
- options. See Documentation/x86_64/boot-options.txt for more
- details.
-
-config IOMMU_LEAK
- bool "IOMMU leak tracing"
- depends on DEBUG_KERNEL
- depends on IOMMU_DEBUG
- help
- Add a simple leak tracer to the IOMMU code. This is useful when you
- are debugging a buggy device driver that leaks IOMMU mappings.
-
-config DEBUG_STACKOVERFLOW
- bool "Check for stack overflows"
- depends on DEBUG_KERNEL
- help
- This option will cause messages to be printed if free stack space
- drops below a certain limit.
-
-config DEBUG_STACK_USAGE
- bool "Stack utilization instrumentation"
- depends on DEBUG_KERNEL
- help
- Enables the display of the minimum amount of free stack which each
- task has ever had available in the sysrq-T and sysrq-P debug output.
-
- This option will slow down process creation somewhat.
-
-#config X86_REMOTE_DEBUG
-# bool "kgdb debugging stub"
-
-endmenu
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 85ffbb4..d3cb3d6 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -1,5 +1,5 @@
# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/config-language.txt.
+# see Documentation/kbuild/kconfig-language.txt.
mainmenu "Linux/Xtensa Kernel Configuration"
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 54dc054..e47a930 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1443,8 +1443,11 @@
cfqq = *async_cfqq;
}
- if (!cfqq)
+ if (!cfqq) {
cfqq = cfq_find_alloc_queue(cfqd, is_sync, tsk, gfp_mask);
+ if (!cfqq)
+ return NULL;
+ }
/*
* pin the queue now that it's allocated, scheduler exit will prune it
@@ -2053,7 +2056,7 @@
{
del_timer_sync(&cfqd->idle_slice_timer);
del_timer_sync(&cfqd->idle_class_timer);
- blk_sync_queue(cfqd->queue);
+ kblockd_flush_work(&cfqd->unplug_work);
}
static void cfq_put_async_queues(struct cfq_data *cfqd)
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index f84093b..cae0a85 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -581,7 +581,7 @@
{
int ret;
- switch (arg) {
+ switch (cmd) {
case HDIO_GET_UNMASKINTR:
case HDIO_GET_MULTCOUNT:
case HDIO_GET_KEEPSETTINGS:
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index de5ba47..56f26466 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -39,7 +39,7 @@
static void blk_unplug_work(struct work_struct *work);
static void blk_unplug_timeout(unsigned long data);
-static void drive_stat_acct(struct request *rq, int nr_sectors, int new_io);
+static void drive_stat_acct(struct request *rq, int new_io);
static void init_request_from_bio(struct request *req, struct bio *bio);
static int __make_request(struct request_queue *q, struct bio *bio);
static struct io_context *current_io_context(gfp_t gfp_flags, int node);
@@ -791,7 +791,6 @@
retval = atomic_dec_and_test(&bqt->refcnt);
if (retval) {
BUG_ON(bqt->busy);
- BUG_ON(!list_empty(&bqt->busy_list));
kfree(bqt->tag_index);
bqt->tag_index = NULL;
@@ -903,7 +902,6 @@
if (init_tag_map(q, tags, depth))
goto fail;
- INIT_LIST_HEAD(&tags->busy_list);
tags->busy = 0;
atomic_set(&tags->refcnt, 1);
return tags;
@@ -954,6 +952,7 @@
*/
q->queue_tags = tags;
q->queue_flags |= (1 << QUEUE_FLAG_QUEUED);
+ INIT_LIST_HEAD(&q->tag_busy_list);
return 0;
fail:
kfree(tags);
@@ -1057,18 +1056,16 @@
bqt->tag_index[tag] = NULL;
- /*
- * We use test_and_clear_bit's memory ordering properties here.
- * The tag_map bit acts as a lock for tag_index[bit], so we need
- * a barrer before clearing the bit (precisely: release semantics).
- * Could use clear_bit_unlock when it is merged.
- */
- if (unlikely(!test_and_clear_bit(tag, bqt->tag_map))) {
+ if (unlikely(!test_bit(tag, bqt->tag_map))) {
printk(KERN_ERR "%s: attempt to clear non-busy tag (%d)\n",
__FUNCTION__, tag);
return;
}
-
+ /*
+ * The tag_map bit acts as a lock for tag_index[bit], so we need
+ * unlock memory barrier semantics.
+ */
+ clear_bit_unlock(tag, bqt->tag_map);
bqt->busy--;
}
@@ -1114,17 +1111,17 @@
if (tag >= bqt->max_depth)
return 1;
- } while (test_and_set_bit(tag, bqt->tag_map));
+ } while (test_and_set_bit_lock(tag, bqt->tag_map));
/*
- * We rely on test_and_set_bit providing lock memory ordering semantics
- * (could use test_and_set_bit_lock when it is merged).
+ * We need lock ordering semantics given by test_and_set_bit_lock.
+ * See blk_queue_end_tag for details.
*/
rq->cmd_flags |= REQ_QUEUED;
rq->tag = tag;
bqt->tag_index[tag] = rq;
blkdev_dequeue_request(rq);
- list_add(&rq->queuelist, &bqt->busy_list);
+ list_add(&rq->queuelist, &q->tag_busy_list);
bqt->busy++;
return 0;
}
@@ -1145,11 +1142,10 @@
**/
void blk_queue_invalidate_tags(struct request_queue *q)
{
- struct blk_queue_tag *bqt = q->queue_tags;
struct list_head *tmp, *n;
struct request *rq;
- list_for_each_safe(tmp, n, &bqt->busy_list) {
+ list_for_each_safe(tmp, n, &q->tag_busy_list) {
rq = list_entry_rq(tmp);
if (rq->tag == -1) {
@@ -1366,9 +1362,7 @@
sg = sg_next(sg);
}
- sg_set_page(sg, bvec->bv_page);
- sg->length = nbytes;
- sg->offset = bvec->bv_offset;
+ sg_set_page(sg, bvec->bv_page, nbytes, bvec->bv_offset);
nsegs++;
}
bvprv = bvec;
@@ -1740,6 +1734,7 @@
void blk_sync_queue(struct request_queue *q)
{
del_timer_sync(&q->unplug_timer);
+ kblockd_flush_work(&q->unplug_work);
}
EXPORT_SYMBOL(blk_sync_queue);
@@ -2343,7 +2338,7 @@
if (blk_rq_tagged(rq))
blk_queue_end_tag(q, rq);
- drive_stat_acct(rq, rq->nr_sectors, 1);
+ drive_stat_acct(rq, 1);
__elv_add_request(q, rq, where, 0);
blk_start_queueing(q);
spin_unlock_irqrestore(q->queue_lock, flags);
@@ -2738,7 +2733,7 @@
EXPORT_SYMBOL(blkdev_issue_flush);
-static void drive_stat_acct(struct request *rq, int nr_sectors, int new_io)
+static void drive_stat_acct(struct request *rq, int new_io)
{
int rw = rq_data_dir(rq);
@@ -2760,7 +2755,7 @@
*/
static inline void add_request(struct request_queue * q, struct request * req)
{
- drive_stat_acct(req, req->nr_sectors, 1);
+ drive_stat_acct(req, 1);
/*
* elevator indicated where it wants this request to be
@@ -3017,7 +3012,7 @@
req->biotail = bio;
req->nr_sectors = req->hard_nr_sectors += nr_sectors;
req->ioprio = ioprio_best(req->ioprio, prio);
- drive_stat_acct(req, nr_sectors, 0);
+ drive_stat_acct(req, 0);
if (!attempt_back_merge(q, req))
elv_merged_request(q, req, el_ret);
goto out;
@@ -3044,7 +3039,7 @@
req->sector = req->hard_sector = bio->bi_sector;
req->nr_sectors = req->hard_nr_sectors += nr_sectors;
req->ioprio = ioprio_best(req->ioprio, prio);
- drive_stat_acct(req, nr_sectors, 0);
+ drive_stat_acct(req, 0);
if (!attempt_front_merge(q, req))
elv_merged_request(q, req, el_ret);
goto out;
diff --git a/crypto/hmac.c b/crypto/hmac.c
index e4eb6ac..0f05be7 100644
--- a/crypto/hmac.c
+++ b/crypto/hmac.c
@@ -61,7 +61,7 @@
desc.tfm = tfm;
desc.flags = crypto_hash_get_flags(parent);
desc.flags &= CRYPTO_TFM_REQ_MAY_SLEEP;
- sg_set_buf(&tmp, inkey, keylen);
+ sg_init_one(&tmp, inkey, keylen);
err = crypto_hash_digest(&desc, &tmp, keylen, digest);
if (err)
@@ -96,7 +96,7 @@
desc.tfm = ctx->child;
desc.flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- sg_set_buf(&tmp, ipad, bs);
+ sg_init_one(&tmp, ipad, bs);
err = crypto_hash_init(&desc);
if (unlikely(err))
@@ -131,7 +131,7 @@
desc.tfm = ctx->child;
desc.flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
- sg_set_buf(&tmp, opad, bs + ds);
+ sg_init_one(&tmp, opad, bs + ds);
err = crypto_hash_final(&desc, digest);
if (unlikely(err))
@@ -158,10 +158,11 @@
desc.tfm = ctx->child;
desc.flags = pdesc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ sg_init_table(sg1, 2);
sg_set_buf(sg1, ipad, bs);
+ sg_set_page(&sg1[1], (void *) sg, 0, 0);
- sg_set_page(&sg[1], (void *) sg);
- sg1[1].length = 0;
+ sg_init_table(sg2, 1);
sg_set_buf(sg2, opad, bs + ds);
err = crypto_hash_digest(&desc, sg1, nbytes + bs, digest);
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index d741c63..24141fb 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -139,7 +139,7 @@
printk("test %u:\n", i + 1);
memset(result, 0, 64);
- sg_set_buf(&sg[0], hash_tv[i].plaintext, hash_tv[i].psize);
+ sg_init_one(&sg[0], hash_tv[i].plaintext, hash_tv[i].psize);
if (hash_tv[i].ksize) {
ret = crypto_hash_setkey(tfm, hash_tv[i].key,
@@ -176,6 +176,7 @@
memset(result, 0, 64);
temp = 0;
+ sg_init_table(sg, hash_tv[i].np);
for (k = 0; k < hash_tv[i].np; k++) {
memcpy(&xbuf[IDX[k]],
hash_tv[i].plaintext + temp,
@@ -289,8 +290,8 @@
goto out;
}
- sg_set_buf(&sg[0], cipher_tv[i].input,
- cipher_tv[i].ilen);
+ sg_init_one(&sg[0], cipher_tv[i].input,
+ cipher_tv[i].ilen);
ablkcipher_request_set_crypt(req, sg, sg,
cipher_tv[i].ilen,
@@ -353,6 +354,7 @@
}
temp = 0;
+ sg_init_table(sg, cipher_tv[i].np);
for (k = 0; k < cipher_tv[i].np; k++) {
memcpy(&xbuf[IDX[k]],
cipher_tv[i].input + temp,
@@ -414,7 +416,7 @@
int bcount;
int ret;
- sg_set_buf(sg, p, blen);
+ sg_init_one(sg, p, blen);
for (start = jiffies, end = start + sec * HZ, bcount = 0;
time_before(jiffies, end); bcount++) {
@@ -440,7 +442,7 @@
int ret = 0;
int i;
- sg_set_buf(sg, p, blen);
+ sg_init_one(sg, p, blen);
local_bh_disable();
local_irq_disable();
@@ -570,6 +572,8 @@
int bcount;
int ret;
+ sg_init_table(sg, 1);
+
for (start = jiffies, end = start + sec * HZ, bcount = 0;
time_before(jiffies, end); bcount++) {
sg_set_buf(sg, p, blen);
@@ -595,6 +599,8 @@
if (plen == blen)
return test_hash_jiffies_digest(desc, p, blen, out, sec);
+ sg_init_table(sg, 1);
+
for (start = jiffies, end = start + sec * HZ, bcount = 0;
time_before(jiffies, end); bcount++) {
ret = crypto_hash_init(desc);
@@ -626,6 +632,8 @@
int i;
int ret;
+ sg_init_table(sg, 1);
+
local_bh_disable();
local_irq_disable();
@@ -677,6 +685,8 @@
if (plen == blen)
return test_hash_cycles_digest(desc, p, blen, out);
+ sg_init_table(sg, 1);
+
local_bh_disable();
local_irq_disable();
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 5d0e26a..da3a08f 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -3,7 +3,7 @@
#
menuconfig ACPI
- bool "ACPI Support (Advanced Configuration and Power Interface) Support"
+ bool "ACPI (Advanced Configuration and Power Interface) Support"
depends on !X86_NUMAQ
depends on !X86_VISWS
depends on !IA64_HP_SIM
@@ -88,7 +88,8 @@
config ACPI_AC
tristate "AC Adapter"
- depends on X86 && POWER_SUPPLY
+ depends on X86
+ select POWER_SUPPLY
default y
help
This driver adds support for the AC Adapter object, which indicates
@@ -97,7 +98,8 @@
config ACPI_BATTERY
tristate "Battery"
- depends on X86 && POWER_SUPPLY
+ depends on X86
+ select POWER_SUPPLY
default y
help
This driver adds support for battery information through
@@ -352,7 +354,7 @@
config ACPI_SBS
tristate "Smart Battery System"
depends on X86
- depends on POWER_SUPPLY
+ select POWER_SUPPLY
help
This driver adds support for the Smart Battery System, another
type of access to battery information, found on some laptops.
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 681e26b..c2ce0ad 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -125,11 +125,15 @@
return POWER_SUPPLY_TECHNOLOGY_NiMH;
if (!strcasecmp("LION", battery->type))
return POWER_SUPPLY_TECHNOLOGY_LION;
+ if (!strcasecmp("LI-ION", battery->type))
+ return POWER_SUPPLY_TECHNOLOGY_LION;
if (!strcasecmp("LiP", battery->type))
return POWER_SUPPLY_TECHNOLOGY_LIPO;
return POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
}
+static int acpi_battery_update(struct acpi_battery *battery);
+
static int acpi_battery_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@@ -139,6 +143,7 @@
if ((!acpi_battery_present(battery)) &&
psp != POWER_SUPPLY_PROP_PRESENT)
return -ENODEV;
+ acpi_battery_update(battery);
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
if (battery->state & 0x01)
@@ -257,7 +262,7 @@
union acpi_object *package,
struct acpi_offsets *offsets, int num)
{
- int i, *x;
+ int i;
union acpi_object *element;
if (package->type != ACPI_TYPE_PACKAGE)
return -EFAULT;
@@ -266,16 +271,21 @@
return -EFAULT;
element = &package->package.elements[i];
if (offsets[i].mode) {
- if (element->type != ACPI_TYPE_STRING &&
- element->type != ACPI_TYPE_BUFFER)
- return -EFAULT;
- strncpy((u8 *)battery + offsets[i].offset,
- element->string.pointer, 32);
+ u8 *ptr = (u8 *)battery + offsets[i].offset;
+ if (element->type == ACPI_TYPE_STRING ||
+ element->type == ACPI_TYPE_BUFFER)
+ strncpy(ptr, element->string.pointer, 32);
+ else if (element->type == ACPI_TYPE_INTEGER) {
+ strncpy(ptr, (u8 *)&element->integer.value,
+ sizeof(acpi_integer));
+ ptr[sizeof(acpi_integer)] = 0;
+ } else return -EFAULT;
} else {
- if (element->type != ACPI_TYPE_INTEGER)
- return -EFAULT;
- x = (int *)((u8 *)battery + offsets[i].offset);
- *x = element->integer.value;
+ if (element->type == ACPI_TYPE_INTEGER) {
+ int *x = (int *)((u8 *)battery +
+ offsets[i].offset);
+ *x = element->integer.value;
+ } else return -EFAULT;
}
}
return 0;
@@ -385,29 +395,81 @@
return acpi_battery_set_alarm(battery);
}
+static ssize_t acpi_battery_alarm_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev));
+ return sprintf(buf, "%d\n", battery->alarm * 1000);
+}
+
+static ssize_t acpi_battery_alarm_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long x;
+ struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev));
+ if (sscanf(buf, "%ld\n", &x) == 1)
+ battery->alarm = x/1000;
+ if (acpi_battery_present(battery))
+ acpi_battery_set_alarm(battery);
+ return count;
+}
+
+static struct device_attribute alarm_attr = {
+ .attr = {.name = "alarm", .mode = 0644, .owner = THIS_MODULE},
+ .show = acpi_battery_alarm_show,
+ .store = acpi_battery_alarm_store,
+};
+
+static int sysfs_add_battery(struct acpi_battery *battery)
+{
+ int result;
+
+ battery->update_time = 0;
+ result = acpi_battery_get_info(battery);
+ acpi_battery_init_alarm(battery);
+ if (result)
+ return result;
+ if (battery->power_unit) {
+ battery->bat.properties = charge_battery_props;
+ battery->bat.num_properties =
+ ARRAY_SIZE(charge_battery_props);
+ } else {
+ battery->bat.properties = energy_battery_props;
+ battery->bat.num_properties =
+ ARRAY_SIZE(energy_battery_props);
+ }
+
+ battery->bat.name = acpi_device_bid(battery->device);
+ battery->bat.type = POWER_SUPPLY_TYPE_BATTERY;
+ battery->bat.get_property = acpi_battery_get_property;
+
+ result = power_supply_register(&battery->device->dev, &battery->bat);
+ if (result)
+ return result;
+ return device_create_file(battery->bat.dev, &alarm_attr);
+}
+
+static void sysfs_remove_battery(struct acpi_battery *battery)
+{
+ if (!battery->bat.dev)
+ return;
+ device_remove_file(battery->bat.dev, &alarm_attr);
+ power_supply_unregister(&battery->bat);
+}
+
static int acpi_battery_update(struct acpi_battery *battery)
{
- int saved_present = acpi_battery_present(battery);
int result = acpi_battery_get_status(battery);
- if (result || !acpi_battery_present(battery))
+ if (result)
return result;
- if (saved_present != acpi_battery_present(battery) ||
- !battery->update_time) {
- battery->update_time = 0;
- result = acpi_battery_get_info(battery);
- if (result)
- return result;
- if (battery->power_unit) {
- battery->bat.properties = charge_battery_props;
- battery->bat.num_properties =
- ARRAY_SIZE(charge_battery_props);
- } else {
- battery->bat.properties = energy_battery_props;
- battery->bat.num_properties =
- ARRAY_SIZE(energy_battery_props);
- }
- acpi_battery_init_alarm(battery);
+ if (!acpi_battery_present(battery)) {
+ sysfs_remove_battery(battery);
+ return 0;
}
+ if (!battery->bat.dev)
+ sysfs_add_battery(battery);
return acpi_battery_get_state(battery);
}
@@ -554,10 +616,6 @@
if (!battery || (count > sizeof(alarm_string) - 1))
return -EINVAL;
- if (result) {
- result = -ENODEV;
- goto end;
- }
if (!acpi_battery_present(battery)) {
result = -ENODEV;
goto end;
@@ -688,33 +746,6 @@
#endif
-static ssize_t acpi_battery_alarm_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev));
- return sprintf(buf, "%d\n", battery->alarm * 1000);
-}
-
-static ssize_t acpi_battery_alarm_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- unsigned long x;
- struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev));
- if (sscanf(buf, "%ld\n", &x) == 1)
- battery->alarm = x/1000;
- if (acpi_battery_present(battery))
- acpi_battery_set_alarm(battery);
- return count;
-}
-
-static struct device_attribute alarm_attr = {
- .attr = {.name = "alarm", .mode = 0644, .owner = THIS_MODULE},
- .show = acpi_battery_alarm_show,
- .store = acpi_battery_alarm_store,
-};
-
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
@@ -732,7 +763,9 @@
acpi_bus_generate_netlink_event(device->pnp.device_class,
device->dev.bus_id, event,
acpi_battery_present(battery));
- kobject_uevent(&battery->bat.dev->kobj, KOBJ_CHANGE);
+ /* acpi_batter_update could remove power_supply object */
+ if (battery->bat.dev)
+ kobject_uevent(&battery->bat.dev->kobj, KOBJ_CHANGE);
}
static int acpi_battery_add(struct acpi_device *device)
@@ -756,11 +789,6 @@
if (result)
goto end;
#endif
- battery->bat.name = acpi_device_bid(device);
- battery->bat.type = POWER_SUPPLY_TYPE_BATTERY;
- battery->bat.get_property = acpi_battery_get_property;
- result = power_supply_register(&battery->device->dev, &battery->bat);
- result = device_create_file(battery->bat.dev, &alarm_attr);
status = acpi_install_notify_handler(device->handle,
ACPI_ALL_NOTIFY,
acpi_battery_notify, battery);
@@ -796,10 +824,7 @@
#ifdef CONFIG_ACPI_PROCFS
acpi_battery_remove_fs(device);
#endif
- if (battery->bat.dev) {
- device_remove_file(battery->bat.dev, &alarm_attr);
- power_supply_unregister(&battery->bat);
- }
+ sysfs_remove_battery(battery);
mutex_destroy(&battery->lock);
kfree(battery);
return 0;
@@ -813,6 +838,7 @@
return -EINVAL;
battery = acpi_driver_data(device);
battery->update_time = 0;
+ acpi_battery_update(battery);
return 0;
}
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index fb2cff9..49d432d 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -198,12 +198,10 @@
return -ENODEV;
}
/*
- * Get device's current power state if it's unknown
- * This means device power state isn't initialized or previous setting failed
+ * Get device's current power state
*/
- if ((device->power.state == ACPI_STATE_UNKNOWN) || device->flags.force_power_state)
- acpi_bus_get_power(device->handle, &device->power.state);
- if ((state == device->power.state) && !device->flags.force_power_state) {
+ acpi_bus_get_power(device->handle, &device->power.state);
+ if (state == device->power.state) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
state));
return 0;
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 301e832..24a7865 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -78,6 +78,7 @@
static int acpi_button_add(struct acpi_device *device);
static int acpi_button_remove(struct acpi_device *device, int type);
+static int acpi_button_resume(struct acpi_device *device);
static int acpi_button_info_open_fs(struct inode *inode, struct file *file);
static int acpi_button_state_open_fs(struct inode *inode, struct file *file);
@@ -87,6 +88,7 @@
.ids = button_device_ids,
.ops = {
.add = acpi_button_add,
+ .resume = acpi_button_resume,
.remove = acpi_button_remove,
},
};
@@ -253,6 +255,19 @@
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
+static int acpi_lid_send_state(struct acpi_button *button)
+{
+ unsigned long state;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(button->device->handle, "_LID", NULL,
+ &state);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+ /* input layer checks if event is redundant */
+ input_report_switch(button->input, SW_LID, !state);
+ return 0;
+}
static void acpi_button_notify(acpi_handle handle, u32 event, void *data)
{
@@ -265,15 +280,8 @@
switch (event) {
case ACPI_BUTTON_NOTIFY_STATUS:
input = button->input;
-
if (button->type == ACPI_BUTTON_TYPE_LID) {
- struct acpi_handle *handle = button->device->handle;
- unsigned long state;
-
- if (!ACPI_FAILURE(acpi_evaluate_integer(handle, "_LID",
- NULL, &state)))
- input_report_switch(input, SW_LID, !state);
-
+ acpi_lid_send_state(button);
} else {
int keycode = test_bit(KEY_SLEEP, input->keybit) ?
KEY_SLEEP : KEY_POWER;
@@ -336,6 +344,17 @@
return ACPI_FAILURE(status) ? -ENODEV : 0;
}
+static int acpi_button_resume(struct acpi_device *device)
+{
+ struct acpi_button *button;
+ if (!device)
+ return -EINVAL;
+ button = acpi_driver_data(device);
+ if (button && button->type == ACPI_BUTTON_TYPE_LID)
+ return acpi_lid_send_state(button);
+ return 0;
+}
+
static void acpi_button_remove_notify_handlers(struct acpi_button *button)
{
switch (button->type) {
@@ -453,6 +472,8 @@
error = input_register_device(input);
if (error)
goto err_remove_handlers;
+ if (button->type == ACPI_BUTTON_TYPE_LID)
+ acpi_lid_send_state(button);
if (device->wakeup.flags.valid) {
/* Button's GPE is run-wake GPE */
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 7b41783..06b78e5 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -65,16 +65,18 @@
/* EC events */
enum ec_event {
ACPI_EC_EVENT_OBF_1 = 1, /* Output buffer full */
- ACPI_EC_EVENT_IBF_0, /* Input buffer empty */
+ ACPI_EC_EVENT_IBF_0, /* Input buffer empty */
};
#define ACPI_EC_DELAY 500 /* Wait 500ms max. during EC ops */
#define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */
-static enum ec_mode {
- EC_INTR = 1, /* Output buffer full */
- EC_POLL, /* Input buffer empty */
-} acpi_ec_mode = EC_INTR;
+enum {
+ EC_FLAGS_WAIT_GPE = 0, /* Don't check status until GPE arrives */
+ EC_FLAGS_QUERY_PENDING, /* Query is pending */
+ EC_FLAGS_GPE_MODE, /* Expect GPE to be sent for status change */
+ EC_FLAGS_ONLY_IBF_GPE, /* Expect GPE only for IBF = 0 event */
+};
static int acpi_ec_remove(struct acpi_device *device, int type);
static int acpi_ec_start(struct acpi_device *device);
@@ -116,9 +118,8 @@
unsigned long command_addr;
unsigned long data_addr;
unsigned long global_lock;
+ unsigned long flags;
struct mutex lock;
- atomic_t query_pending;
- atomic_t event_count;
wait_queue_head_t wait;
struct list_head list;
u8 handlers_installed;
@@ -148,45 +149,54 @@
outb(data, ec->data_addr);
}
-static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event,
- unsigned old_count)
+static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event)
{
- u8 status = acpi_ec_read_status(ec);
- if (old_count == atomic_read(&ec->event_count))
+ if (test_bit(EC_FLAGS_WAIT_GPE, &ec->flags))
return 0;
if (event == ACPI_EC_EVENT_OBF_1) {
- if (status & ACPI_EC_FLAG_OBF)
+ if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_OBF)
return 1;
} else if (event == ACPI_EC_EVENT_IBF_0) {
- if (!(status & ACPI_EC_FLAG_IBF))
+ if (!(acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF))
return 1;
}
return 0;
}
-static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event,
- unsigned count, int force_poll)
+static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
{
- if (unlikely(force_poll) || acpi_ec_mode == EC_POLL) {
- unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
- while (time_before(jiffies, delay)) {
- if (acpi_ec_check_status(ec, event, 0))
- return 0;
+ if (likely(test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) &&
+ likely(!force_poll)) {
+ if (wait_event_timeout(ec->wait, acpi_ec_check_status(ec, event),
+ msecs_to_jiffies(ACPI_EC_DELAY)))
+ return 0;
+ clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
+ if (acpi_ec_check_status(ec, event)) {
+ if (event == ACPI_EC_EVENT_OBF_1) {
+ /* miss OBF = 1 GPE, don't expect it anymore */
+ printk(KERN_INFO PREFIX "missing OBF_1 confirmation,"
+ "switching to degraded mode.\n");
+ set_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags);
+ } else {
+ /* missing GPEs, switch back to poll mode */
+ printk(KERN_INFO PREFIX "missing IBF_1 confirmations,"
+ "switch off interrupt mode.\n");
+ clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
+ }
+ return 0;
}
} else {
- if (wait_event_timeout(ec->wait,
- acpi_ec_check_status(ec, event, count),
- msecs_to_jiffies(ACPI_EC_DELAY)) ||
- acpi_ec_check_status(ec, event, 0)) {
- return 0;
- } else {
- printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
- " status = %d, expect_event = %d\n",
- acpi_ec_read_status(ec), event);
+ unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
+ clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
+ while (time_before(jiffies, delay)) {
+ if (acpi_ec_check_status(ec, event))
+ return 0;
}
}
-
+ printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
+ " status = %d, expect_event = %d\n",
+ acpi_ec_read_status(ec), event);
return -ETIME;
}
@@ -196,39 +206,42 @@
int force_poll)
{
int result = 0;
- unsigned count = atomic_read(&ec->event_count);
+ set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
acpi_ec_write_cmd(ec, command);
for (; wdata_len > 0; --wdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count, force_poll);
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
if (result) {
printk(KERN_ERR PREFIX
"write_cmd timeout, command = %d\n", command);
goto end;
}
- count = atomic_read(&ec->event_count);
+ set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
acpi_ec_write_data(ec, *(wdata++));
}
if (!rdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, count, force_poll);
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
if (result) {
printk(KERN_ERR PREFIX
"finish-write timeout, command = %d\n", command);
goto end;
}
- } else if (command == ACPI_EC_COMMAND_QUERY) {
- atomic_set(&ec->query_pending, 0);
- }
+ } else if (command == ACPI_EC_COMMAND_QUERY)
+ clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
for (; rdata_len > 0; --rdata_len) {
- result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, count, force_poll);
+ if (test_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags))
+ force_poll = 1;
+ result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, force_poll);
if (result) {
printk(KERN_ERR PREFIX "read timeout, command = %d\n",
command);
goto end;
}
- count = atomic_read(&ec->event_count);
+ /* Don't expect GPE after last read */
+ if (rdata_len > 1)
+ set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
*(rdata++) = acpi_ec_read_data(ec);
}
end:
@@ -258,10 +271,7 @@
}
}
- /* Make sure GPE is enabled before doing transaction */
- acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR);
-
- status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0, 0);
+ status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0);
if (status) {
printk(KERN_ERR PREFIX
"input buffer is not empty, aborting transaction\n");
@@ -435,9 +445,9 @@
void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit)
{
- struct acpi_ec_query_handler *handler;
+ struct acpi_ec_query_handler *handler, *tmp;
mutex_lock(&ec->lock);
- list_for_each_entry(handler, &ec->list, node) {
+ list_for_each_entry_safe(handler, tmp, &ec->list, node) {
if (query_bit == handler->query_bit) {
list_del(&handler->node);
kfree(handler);
@@ -476,23 +486,24 @@
static u32 acpi_ec_gpe_handler(void *data)
{
acpi_status status = AE_OK;
- u8 value;
struct acpi_ec *ec = data;
- atomic_inc(&ec->event_count);
-
- if (acpi_ec_mode == EC_INTR) {
+ clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
+ if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))
wake_up(&ec->wait);
+
+ if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_SCI) {
+ if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
+ status = acpi_os_execute(OSL_EC_BURST_HANDLER,
+ acpi_ec_gpe_query, ec);
+ } else if (unlikely(!test_bit(EC_FLAGS_GPE_MODE, &ec->flags))) {
+ /* this is non-query, must be confirmation */
+ printk(KERN_INFO PREFIX "non-query interrupt received,"
+ " switching to interrupt mode\n");
+ set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
}
- value = acpi_ec_read_status(ec);
- if ((value & ACPI_EC_FLAG_SCI) && !atomic_read(&ec->query_pending)) {
- atomic_set(&ec->query_pending, 1);
- status =
- acpi_os_execute(OSL_EC_BURST_HANDLER, acpi_ec_gpe_query, ec);
- }
-
- return status == AE_OK ?
+ return ACPI_SUCCESS(status) ?
ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
}
@@ -641,13 +652,10 @@
struct acpi_ec *ec = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
if (!ec)
return NULL;
-
- atomic_set(&ec->query_pending, 1);
- atomic_set(&ec->event_count, 1);
+ ec->flags = 1 << EC_FLAGS_QUERY_PENDING;
mutex_init(&ec->lock);
init_waitqueue_head(&ec->wait);
INIT_LIST_HEAD(&ec->list);
-
return ec;
}
@@ -741,6 +749,8 @@
acpi_ec_add_fs(device);
printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
ec->gpe, ec->command_addr, ec->data_addr);
+ printk(KERN_INFO PREFIX "driver started in %s mode\n",
+ (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))?"interrupt":"poll");
return 0;
}
@@ -833,7 +843,7 @@
ret = ec_install_handlers(ec);
/* EC is fully operational, allow queries */
- atomic_set(&ec->query_pending, 0);
+ clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
return ret;
}
@@ -924,20 +934,4 @@
return;
}
-#endif /* 0 */
-
-static int __init acpi_ec_set_intr_mode(char *str)
-{
- int intr;
-
- if (!get_option(&str, &intr))
- return 0;
-
- acpi_ec_mode = (intr) ? EC_INTR : EC_POLL;
-
- printk(KERN_NOTICE PREFIX "%s mode.\n", intr ? "interrupt" : "polling");
-
- return 1;
-}
-
-__setup("ec_intr=", acpi_ec_set_intr_mode);
+#endif /* 0 */
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index c81f6bd..a5a5532 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -47,8 +47,6 @@
static int acpi_fan_add(struct acpi_device *device);
static int acpi_fan_remove(struct acpi_device *device, int type);
-static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state);
-static int acpi_fan_resume(struct acpi_device *device);
static const struct acpi_device_id fan_device_ids[] = {
{"PNP0C0B", 0},
@@ -63,15 +61,9 @@
.ops = {
.add = acpi_fan_add,
.remove = acpi_fan_remove,
- .suspend = acpi_fan_suspend,
- .resume = acpi_fan_resume,
},
};
-struct acpi_fan {
- struct acpi_device * device;
-};
-
/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
@@ -80,12 +72,12 @@
static int acpi_fan_read_state(struct seq_file *seq, void *offset)
{
- struct acpi_fan *fan = seq->private;
+ struct acpi_device *device = seq->private;
int state = 0;
- if (fan) {
- if (acpi_bus_get_power(fan->device->handle, &state))
+ if (device) {
+ if (acpi_bus_get_power(device->handle, &state))
seq_printf(seq, "status: ERROR\n");
else
seq_printf(seq, "status: %s\n",
@@ -105,11 +97,10 @@
{
int result = 0;
struct seq_file *m = file->private_data;
- struct acpi_fan *fan = m->private;
+ struct acpi_device *device = m->private;
char state_string[12] = { '\0' };
-
- if (!fan || (count > sizeof(state_string) - 1))
+ if (count > sizeof(state_string) - 1)
return -EINVAL;
if (copy_from_user(state_string, buffer, count))
@@ -117,7 +108,7 @@
state_string[count] = '\0';
- result = acpi_bus_set_power(fan->device->handle,
+ result = acpi_bus_set_power(device->handle,
simple_strtoul(state_string, NULL, 0));
if (result)
return result;
@@ -158,7 +149,7 @@
return -ENODEV;
else {
entry->proc_fops = &acpi_fan_state_ops;
- entry->data = acpi_driver_data(device);
+ entry->data = device;
entry->owner = THIS_MODULE;
}
@@ -191,14 +182,8 @@
if (!device)
return -EINVAL;
- fan = kzalloc(sizeof(struct acpi_fan), GFP_KERNEL);
- if (!fan)
- return -ENOMEM;
-
- fan->device = device;
strcpy(acpi_device_name(device), "Fan");
strcpy(acpi_device_class(device), ACPI_FAN_CLASS);
- acpi_driver_data(device) = fan;
result = acpi_bus_get_power(device->handle, &state);
if (result) {
@@ -206,10 +191,6 @@
goto end;
}
- device->flags.force_power_state = 1;
- acpi_bus_set_power(device->handle, state);
- device->flags.force_power_state = 0;
-
result = acpi_fan_add_fs(device);
if (result)
goto end;
@@ -227,53 +208,14 @@
static int acpi_fan_remove(struct acpi_device *device, int type)
{
- struct acpi_fan *fan = NULL;
-
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
- fan = acpi_driver_data(device);
-
acpi_fan_remove_fs(device);
- kfree(fan);
-
return 0;
}
-static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state)
-{
- if (!device)
- return -EINVAL;
-
- acpi_bus_set_power(device->handle, ACPI_STATE_D0);
-
- return AE_OK;
-}
-
-static int acpi_fan_resume(struct acpi_device *device)
-{
- int result = 0;
- int power_state = 0;
-
- if (!device)
- return -EINVAL;
-
- result = acpi_bus_get_power(device->handle, &power_state);
- if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error reading fan power state\n"));
- return result;
- }
-
- device->flags.force_power_state = 1;
- acpi_bus_set_power(device->handle, power_state);
- device->flags.force_power_state = 0;
-
- return result;
-}
-
static int __init acpi_fan_init(void)
{
int result = 0;
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 57b9a29..af1769a 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -86,7 +86,6 @@
acpi_bus_id name;
u32 system_level;
u32 order;
- int state;
struct mutex resource_lock;
struct list_head reference;
};
@@ -128,33 +127,31 @@
return 0;
}
-static int acpi_power_get_state(struct acpi_power_resource *resource)
+static int acpi_power_get_state(struct acpi_power_resource *resource, int *state)
{
acpi_status status = AE_OK;
unsigned long sta = 0;
- if (!resource)
+ if (!resource || !state)
return -EINVAL;
status = acpi_evaluate_integer(resource->device->handle, "_STA", NULL, &sta);
if (ACPI_FAILURE(status))
return -ENODEV;
- if (sta & 0x01)
- resource->state = ACPI_POWER_RESOURCE_STATE_ON;
- else
- resource->state = ACPI_POWER_RESOURCE_STATE_OFF;
+ *state = (sta & 0x01)?ACPI_POWER_RESOURCE_STATE_ON:
+ ACPI_POWER_RESOURCE_STATE_OFF;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] is %s\n",
- resource->name, resource->state ? "on" : "off"));
+ resource->name, state ? "on" : "off"));
return 0;
}
static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state)
{
- int result = 0;
+ int result = 0, state1;
struct acpi_power_resource *resource = NULL;
u32 i = 0;
@@ -168,11 +165,11 @@
result = acpi_power_get_context(list->handles[i], &resource);
if (result)
return result;
- result = acpi_power_get_state(resource);
+ result = acpi_power_get_state(resource, &state1);
if (result)
return result;
- *state = resource->state;
+ *state = state1;
if (*state != ACPI_POWER_RESOURCE_STATE_ON)
break;
@@ -186,7 +183,7 @@
static int acpi_power_on(acpi_handle handle, struct acpi_device *dev)
{
- int result = 0;
+ int result = 0, state;
int found = 0;
acpi_status status = AE_OK;
struct acpi_power_resource *resource = NULL;
@@ -224,20 +221,14 @@
}
mutex_unlock(&resource->resource_lock);
- if (resource->state == ACPI_POWER_RESOURCE_STATE_ON) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] already on\n",
- resource->name));
- return 0;
- }
-
status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL);
if (ACPI_FAILURE(status))
return -ENODEV;
- result = acpi_power_get_state(resource);
+ result = acpi_power_get_state(resource, &state);
if (result)
return result;
- if (resource->state != ACPI_POWER_RESOURCE_STATE_ON)
+ if (state != ACPI_POWER_RESOURCE_STATE_ON)
return -ENOEXEC;
/* Update the power resource's _device_ power state */
@@ -250,7 +241,7 @@
static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev)
{
- int result = 0;
+ int result = 0, state;
acpi_status status = AE_OK;
struct acpi_power_resource *resource = NULL;
struct list_head *node, *next;
@@ -281,20 +272,14 @@
}
mutex_unlock(&resource->resource_lock);
- if (resource->state == ACPI_POWER_RESOURCE_STATE_OFF) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] already off\n",
- resource->name));
- return 0;
- }
-
status = acpi_evaluate_object(resource->device->handle, "_OFF", NULL, NULL);
if (ACPI_FAILURE(status))
return -ENODEV;
- result = acpi_power_get_state(resource);
+ result = acpi_power_get_state(resource, &state);
if (result)
return result;
- if (resource->state != ACPI_POWER_RESOURCE_STATE_OFF)
+ if (state != ACPI_POWER_RESOURCE_STATE_OFF)
return -ENOEXEC;
/* Update the power resource's _device_ power state */
@@ -494,7 +479,7 @@
static int acpi_power_seq_show(struct seq_file *seq, void *offset)
{
int count = 0;
- int result = 0;
+ int result = 0, state;
struct acpi_power_resource *resource = NULL;
struct list_head *node, *next;
struct acpi_power_reference *ref;
@@ -505,12 +490,12 @@
if (!resource)
goto end;
- result = acpi_power_get_state(resource);
+ result = acpi_power_get_state(resource, &state);
if (result)
goto end;
seq_puts(seq, "state: ");
- switch (resource->state) {
+ switch (state) {
case ACPI_POWER_RESOURCE_STATE_ON:
seq_puts(seq, "on\n");
break;
@@ -591,7 +576,7 @@
static int acpi_power_add(struct acpi_device *device)
{
- int result = 0;
+ int result = 0, state;
acpi_status status = AE_OK;
struct acpi_power_resource *resource = NULL;
union acpi_object acpi_object;
@@ -622,11 +607,11 @@
resource->system_level = acpi_object.power_resource.system_level;
resource->order = acpi_object.power_resource.resource_order;
- result = acpi_power_get_state(resource);
+ result = acpi_power_get_state(resource, &state);
if (result)
goto end;
- switch (resource->state) {
+ switch (state) {
case ACPI_POWER_RESOURCE_STATE_ON:
device->power.state = ACPI_STATE_D0;
break;
@@ -643,7 +628,7 @@
goto end;
printk(KERN_INFO PREFIX "%s [%s] (%s)\n", acpi_device_name(device),
- acpi_device_bid(device), resource->state ? "on" : "off");
+ acpi_device_bid(device), state ? "on" : "off");
end:
if (result)
@@ -680,7 +665,7 @@
static int acpi_power_resume(struct acpi_device *device)
{
- int result = 0;
+ int result = 0, state;
struct acpi_power_resource *resource = NULL;
struct acpi_power_reference *ref;
@@ -689,12 +674,12 @@
resource = (struct acpi_power_resource *)acpi_driver_data(device);
- result = acpi_power_get_state(resource);
+ result = acpi_power_get_state(resource, &state);
if (result)
return result;
mutex_lock(&resource->resource_lock);
- if ((resource->state == ACPI_POWER_RESOURCE_STATE_OFF) &&
+ if (state == ACPI_POWER_RESOURCE_STATE_OFF &&
!list_empty(&resource->reference)) {
ref = container_of(resource->reference.next, struct acpi_power_reference, node);
mutex_unlock(&resource->resource_lock);
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index f3d3867..2c0b663 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -167,8 +167,8 @@
{
u32 acpi_state = acpi_target_sleep_state;
- acpi_leave_sleep_state(acpi_state);
acpi_disable_wakeup_device(acpi_state);
+ acpi_leave_sleep_state(acpi_state);
/* reset firmware waking vector */
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
@@ -272,8 +272,8 @@
* enable it here.
*/
acpi_enable();
- acpi_leave_sleep_state(ACPI_STATE_S4);
acpi_disable_wakeup_device(ACPI_STATE_S4);
+ acpi_leave_sleep_state(ACPI_STATE_S4);
/* reset firmware waking vector */
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
@@ -410,6 +410,7 @@
/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
printk("%s called\n", __FUNCTION__);
local_irq_disable();
+ acpi_enable_wakeup_device(ACPI_STATE_S5);
acpi_enter_sleep_state(ACPI_STATE_S5);
}
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index 3839efd..1538355 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -194,6 +194,23 @@
return result;
}
+/* Read a possibly BCD register, always return binary */
+static u32 cmos_bcd_read(int offset, int rtc_control)
+{
+ u32 val = CMOS_READ(offset);
+ if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ BCD_TO_BIN(val);
+ return val;
+}
+
+/* Write binary value into possibly BCD register */
+static void cmos_bcd_write(u32 val, int offset, int rtc_control)
+{
+ if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ BIN_TO_BCD(val);
+ CMOS_WRITE(val, offset);
+}
+
static ssize_t
acpi_system_write_alarm(struct file *file,
const char __user * buffer, size_t count, loff_t * ppos)
@@ -258,35 +275,18 @@
spin_lock_irq(&rtc_lock);
rtc_control = CMOS_READ(RTC_CONTROL);
- if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BIN_TO_BCD(yr);
- BIN_TO_BCD(mo);
- BIN_TO_BCD(day);
- BIN_TO_BCD(hr);
- BIN_TO_BCD(min);
- BIN_TO_BCD(sec);
- }
if (adjust) {
- yr += CMOS_READ(RTC_YEAR);
- mo += CMOS_READ(RTC_MONTH);
- day += CMOS_READ(RTC_DAY_OF_MONTH);
- hr += CMOS_READ(RTC_HOURS);
- min += CMOS_READ(RTC_MINUTES);
- sec += CMOS_READ(RTC_SECONDS);
+ yr += cmos_bcd_read(RTC_YEAR, rtc_control);
+ mo += cmos_bcd_read(RTC_MONTH, rtc_control);
+ day += cmos_bcd_read(RTC_DAY_OF_MONTH, rtc_control);
+ hr += cmos_bcd_read(RTC_HOURS, rtc_control);
+ min += cmos_bcd_read(RTC_MINUTES, rtc_control);
+ sec += cmos_bcd_read(RTC_SECONDS, rtc_control);
}
spin_unlock_irq(&rtc_lock);
- if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BCD_TO_BIN(yr);
- BCD_TO_BIN(mo);
- BCD_TO_BIN(day);
- BCD_TO_BIN(hr);
- BCD_TO_BIN(min);
- BCD_TO_BIN(sec);
- }
-
if (sec > 59) {
min++;
sec -= 60;
@@ -307,14 +307,6 @@
yr++;
mo -= 12;
}
- if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BIN_TO_BCD(yr);
- BIN_TO_BCD(mo);
- BIN_TO_BCD(day);
- BIN_TO_BCD(hr);
- BIN_TO_BCD(min);
- BIN_TO_BCD(sec);
- }
spin_lock_irq(&rtc_lock);
/*
@@ -326,9 +318,9 @@
CMOS_READ(RTC_INTR_FLAGS);
/* write the fields the rtc knows about */
- CMOS_WRITE(hr, RTC_HOURS_ALARM);
- CMOS_WRITE(min, RTC_MINUTES_ALARM);
- CMOS_WRITE(sec, RTC_SECONDS_ALARM);
+ cmos_bcd_write(hr, RTC_HOURS_ALARM, rtc_control);
+ cmos_bcd_write(min, RTC_MINUTES_ALARM, rtc_control);
+ cmos_bcd_write(sec, RTC_SECONDS_ALARM, rtc_control);
/*
* If the system supports an enhanced alarm it will have non-zero
@@ -336,11 +328,11 @@
* to the RTC area of memory.
*/
if (acpi_gbl_FADT.day_alarm)
- CMOS_WRITE(day, acpi_gbl_FADT.day_alarm);
+ cmos_bcd_write(day, acpi_gbl_FADT.day_alarm, rtc_control);
if (acpi_gbl_FADT.month_alarm)
- CMOS_WRITE(mo, acpi_gbl_FADT.month_alarm);
+ cmos_bcd_write(mo, acpi_gbl_FADT.month_alarm, rtc_control);
if (acpi_gbl_FADT.century)
- CMOS_WRITE(yr / 100, acpi_gbl_FADT.century);
+ cmos_bcd_write(yr / 100, acpi_gbl_FADT.century, rtc_control);
/* enable the rtc alarm interrupt */
rtc_control |= RTC_AIE;
CMOS_WRITE(rtc_control, RTC_CONTROL);
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 95229e7..ed9b407 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -41,6 +41,7 @@
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
+#include <linux/dmi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
@@ -48,6 +49,9 @@
#define DRV_NAME "ahci"
#define DRV_VERSION "3.0"
+static int ahci_enable_alpm(struct ata_port *ap,
+ enum link_pm policy);
+static void ahci_disable_alpm(struct ata_port *ap);
enum {
AHCI_PCI_BAR = 5,
@@ -98,6 +102,7 @@
HOST_CAP_SSC = (1 << 14), /* Slumber capable */
HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
HOST_CAP_CLO = (1 << 24), /* Command List Override support */
+ HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
HOST_CAP_SNTF = (1 << 29), /* SNotification register */
HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
@@ -154,6 +159,8 @@
PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
/* PORT_CMD bits */
+ PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
+ PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
PORT_CMD_PMP = (1 << 17), /* PMP attached */
PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
@@ -177,13 +184,14 @@
AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
+ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
/* ap->flags bits */
- AHCI_FLAG_NO_HOTPLUG = (1 << 24), /* ignore PxSERR.DIAG.N */
AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_ACPI_SATA | ATA_FLAG_AN,
+ ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
+ ATA_FLAG_IPM,
AHCI_LFLAG_COMMON = ATA_LFLAG_SKIP_D2H_BSY,
};
@@ -241,6 +249,7 @@
static void ahci_pmp_detach(struct ata_port *ap);
static void ahci_error_handler(struct ata_port *ap);
static void ahci_vt8251_error_handler(struct ata_port *ap);
+static void ahci_p5wdh_error_handler(struct ata_port *ap);
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
static int ahci_port_resume(struct ata_port *ap);
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
@@ -252,6 +261,11 @@
static int ahci_pci_device_resume(struct pci_dev *pdev);
#endif
+static struct class_device_attribute *ahci_shost_attrs[] = {
+ &class_device_attr_link_power_management_policy,
+ NULL
+};
+
static struct scsi_host_template ahci_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -269,6 +283,7 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+ .shost_attrs = ahci_shost_attrs,
};
static const struct ata_port_operations ahci_ops = {
@@ -300,6 +315,8 @@
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
#endif
+ .enable_pm = ahci_enable_alpm,
+ .disable_pm = ahci_disable_alpm,
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
@@ -339,6 +356,40 @@
.port_stop = ahci_port_stop,
};
+static const struct ata_port_operations ahci_p5wdh_ops = {
+ .check_status = ahci_check_status,
+ .check_altstatus = ahci_check_status,
+ .dev_select = ata_noop_dev_select,
+
+ .tf_read = ahci_tf_read,
+
+ .qc_defer = sata_pmp_qc_defer_cmd_switch,
+ .qc_prep = ahci_qc_prep,
+ .qc_issue = ahci_qc_issue,
+
+ .irq_clear = ahci_irq_clear,
+
+ .scr_read = ahci_scr_read,
+ .scr_write = ahci_scr_write,
+
+ .freeze = ahci_freeze,
+ .thaw = ahci_thaw,
+
+ .error_handler = ahci_p5wdh_error_handler,
+ .post_internal_cmd = ahci_post_internal_cmd,
+
+ .pmp_attach = ahci_pmp_attach,
+ .pmp_detach = ahci_pmp_detach,
+
+#ifdef CONFIG_PM
+ .port_suspend = ahci_port_suspend,
+ .port_resume = ahci_port_resume,
+#endif
+
+ .port_start = ahci_port_start,
+ .port_stop = ahci_port_stop,
+};
+
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
static const struct ata_port_info ahci_port_info[] = {
@@ -800,6 +851,130 @@
writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
}
+static void ahci_disable_alpm(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd;
+ struct ahci_port_priv *pp = ap->private_data;
+
+ /* IPM bits should be disabled by libata-core */
+ /* get the existing command bits */
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /* disable ALPM and ASP */
+ cmd &= ~PORT_CMD_ASP;
+ cmd &= ~PORT_CMD_ALPE;
+
+ /* force the interface back to active */
+ cmd |= PORT_CMD_ICC_ACTIVE;
+
+ /* write out new cmd value */
+ writel(cmd, port_mmio + PORT_CMD);
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /* wait 10ms to be sure we've come out of any low power state */
+ msleep(10);
+
+ /* clear out any PhyRdy stuff from interrupt status */
+ writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
+
+ /* go ahead and clean out PhyRdy Change from Serror too */
+ ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
+
+ /*
+ * Clear flag to indicate that we should ignore all PhyRdy
+ * state changes
+ */
+ hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
+
+ /*
+ * Enable interrupts on Phy Ready.
+ */
+ pp->intr_mask |= PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+ /*
+ * don't change the link pm policy - we can be called
+ * just to turn of link pm temporarily
+ */
+}
+
+static int ahci_enable_alpm(struct ata_port *ap,
+ enum link_pm policy)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd;
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 asp;
+
+ /* Make sure the host is capable of link power management */
+ if (!(hpriv->cap & HOST_CAP_ALPM))
+ return -EINVAL;
+
+ switch (policy) {
+ case MAX_PERFORMANCE:
+ case NOT_AVAILABLE:
+ /*
+ * if we came here with NOT_AVAILABLE,
+ * it just means this is the first time we
+ * have tried to enable - default to max performance,
+ * and let the user go to lower power modes on request.
+ */
+ ahci_disable_alpm(ap);
+ return 0;
+ case MIN_POWER:
+ /* configure HBA to enter SLUMBER */
+ asp = PORT_CMD_ASP;
+ break;
+ case MEDIUM_POWER:
+ /* configure HBA to enter PARTIAL */
+ asp = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * Disable interrupts on Phy Ready. This keeps us from
+ * getting woken up due to spurious phy ready interrupts
+ * TBD - Hot plug should be done via polling now, is
+ * that even supported?
+ */
+ pp->intr_mask &= ~PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+ /*
+ * Set a flag to indicate that we should ignore all PhyRdy
+ * state changes since these can happen now whenever we
+ * change link state
+ */
+ hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
+
+ /* get the existing command bits */
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /*
+ * Set ASP based on Policy
+ */
+ cmd |= asp;
+
+ /*
+ * Setting this bit will instruct the HBA to aggressively
+ * enter a lower power link state when it's appropriate and
+ * based on the value set above for ASP
+ */
+ cmd |= PORT_CMD_ALPE;
+
+ /* write out new cmd value */
+ writel(cmd, port_mmio + PORT_CMD);
+ cmd = readl(port_mmio + PORT_CMD);
+
+ /* IPM bits should be set by libata-core */
+ return 0;
+}
+
#ifdef CONFIG_PM
static void ahci_power_down(struct ata_port *ap)
{
@@ -862,8 +1037,10 @@
* AHCI-specific, such as HOST_RESET.
*/
tmp = readl(mmio + HOST_CTL);
- if (!(tmp & HOST_AHCI_EN))
- writel(tmp | HOST_AHCI_EN, mmio + HOST_CTL);
+ if (!(tmp & HOST_AHCI_EN)) {
+ tmp |= HOST_AHCI_EN;
+ writel(tmp, mmio + HOST_CTL);
+ }
/* global controller reset */
if ((tmp & HOST_RESET) == 0) {
@@ -1117,15 +1294,8 @@
tf.ctl &= ~ATA_SRST;
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
- /* spec mandates ">= 2ms" before checking status.
- * We wait 150ms, because that was the magic delay used for
- * ATAPI devices in Hale Landis's ATADRVR, for the period of time
- * between when the ATA command register is written, and then
- * status is checked. Because waiting for "a while" before
- * checking status is fine, post SRST, we perform this magic
- * delay here as well.
- */
- msleep(150);
+ /* wait a while before checking status */
+ ata_wait_after_reset(ap, deadline);
rc = ata_wait_ready(ap, deadline);
/* link occupied, -ENODEV too is an error */
@@ -1213,6 +1383,53 @@
return rc ?: -EAGAIN;
}
+static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+ struct ata_taskfile tf;
+ int rc;
+
+ ahci_stop_engine(ap);
+
+ /* clear D2H reception area to properly wait for D2H FIS */
+ ata_tf_init(link->device, &tf);
+ tf.command = 0x80;
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+
+ rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
+ deadline);
+
+ ahci_start_engine(ap);
+
+ if (rc || ata_link_offline(link))
+ return rc;
+
+ /* spec mandates ">= 2ms" before checking status */
+ msleep(150);
+
+ /* The pseudo configuration device on SIMG4726 attached to
+ * ASUS P5W-DH Deluxe doesn't send signature FIS after
+ * hardreset if no device is attached to the first downstream
+ * port && the pseudo device locks up on SRST w/ PMP==0. To
+ * work around this, wait for !BSY only briefly. If BSY isn't
+ * cleared, perform CLO and proceed to IDENTIFY (achieved by
+ * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
+ *
+ * Wait for two seconds. Devices attached to downstream port
+ * which can't process the following IDENTIFY after this will
+ * have to be reset again. For most cases, this should
+ * suffice while making probing snappish enough.
+ */
+ rc = ata_wait_ready(ap, jiffies + 2 * HZ);
+ if (rc)
+ ahci_kick_engine(ap, 0);
+
+ return 0;
+}
+
static void ahci_postreset(struct ata_link *link, unsigned int *class)
{
struct ata_port *ap = link->ap;
@@ -1426,6 +1643,17 @@
if (unlikely(resetting))
status &= ~PORT_IRQ_BAD_PMP;
+ /* If we are getting PhyRdy, this is
+ * just a power state change, we should
+ * clear out this, plus the PhyRdy/Comm
+ * Wake bits from Serror
+ */
+ if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
+ (status & PORT_IRQ_PHYRDY)) {
+ status &= ~PORT_IRQ_PHYRDY;
+ ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
+ }
+
if (unlikely(status & PORT_IRQ_ERROR)) {
ahci_error_intr(ap, status);
return;
@@ -1670,6 +1898,19 @@
ahci_postreset);
}
+static void ahci_p5wdh_error_handler(struct ata_port *ap)
+{
+ if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
+ /* restart engine */
+ ahci_stop_engine(ap);
+ ahci_start_engine(ap);
+ }
+
+ /* perform recovery */
+ ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_p5wdh_hardreset,
+ ahci_postreset);
+}
+
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
@@ -1955,6 +2196,51 @@
);
}
+/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
+ * hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't
+ * support PMP and the 4726 either directly exports the device
+ * attached to the first downstream port or acts as a hardware storage
+ * controller and emulate a single ATA device (can be RAID 0/1 or some
+ * other configuration).
+ *
+ * When there's no device attached to the first downstream port of the
+ * 4726, "Config Disk" appears, which is a pseudo ATA device to
+ * configure the 4726. However, ATA emulation of the device is very
+ * lame. It doesn't send signature D2H Reg FIS after the initial
+ * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
+ *
+ * The following function works around the problem by always using
+ * hardreset on the port and not depending on receiving signature FIS
+ * afterward. If signature FIS isn't received soon, ATA class is
+ * assumed without follow-up softreset.
+ */
+static void ahci_p5wdh_workaround(struct ata_host *host)
+{
+ static struct dmi_system_id sysids[] = {
+ {
+ .ident = "P5W DH Deluxe",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR,
+ "ASUSTEK COMPUTER INC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
+ },
+ },
+ { }
+ };
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+
+ if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
+ dmi_check_system(sysids)) {
+ struct ata_port *ap = host->ports[1];
+
+ dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
+ "Deluxe on-board SIMG4726 workaround\n");
+
+ ap->ops = &ahci_p5wdh_ops;
+ ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
+ }
+}
+
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
@@ -2015,6 +2301,9 @@
ata_port_pbar_desc(ap, AHCI_PCI_BAR,
0x100 + ap->port_no * 0x80, "port");
+ /* set initial link pm policy */
+ ap->pm_policy = NOT_AVAILABLE;
+
/* standard SATA port setup */
if (hpriv->port_map & (1 << i))
ap->ioaddr.cmd_addr = port_mmio;
@@ -2024,6 +2313,9 @@
ap->ops = &ata_dummy_port_ops;
}
+ /* apply workaround for ASUS P5W DH Deluxe mainboard */
+ ahci_p5wdh_workaround(host);
+
/* initialize adapter */
rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
if (rc)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2d147b5..164c7d9 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -68,7 +68,8 @@
static unsigned int ata_dev_init_params(struct ata_device *dev,
u16 heads, u16 sectors);
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
-static unsigned int ata_dev_set_AN(struct ata_device *dev, u8 enable);
+static unsigned int ata_dev_set_feature(struct ata_device *dev,
+ u8 enable, u8 feature);
static void ata_dev_xfermask(struct ata_device *dev);
static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
@@ -619,6 +620,181 @@
}
}
+static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy)
+{
+ struct ata_link *link = dev->link;
+ struct ata_port *ap = link->ap;
+ u32 scontrol;
+ unsigned int err_mask;
+ int rc;
+
+ /*
+ * disallow DIPM for drivers which haven't set
+ * ATA_FLAG_IPM. This is because when DIPM is enabled,
+ * phy ready will be set in the interrupt status on
+ * state changes, which will cause some drivers to
+ * think there are errors - additionally drivers will
+ * need to disable hot plug.
+ */
+ if (!(ap->flags & ATA_FLAG_IPM) || !ata_dev_enabled(dev)) {
+ ap->pm_policy = NOT_AVAILABLE;
+ return -EINVAL;
+ }
+
+ /*
+ * For DIPM, we will only enable it for the
+ * min_power setting.
+ *
+ * Why? Because Disks are too stupid to know that
+ * If the host rejects a request to go to SLUMBER
+ * they should retry at PARTIAL, and instead it
+ * just would give up. So, for medium_power to
+ * work at all, we need to only allow HIPM.
+ */
+ rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+ if (rc)
+ return rc;
+
+ switch (policy) {
+ case MIN_POWER:
+ /* no restrictions on IPM transitions */
+ scontrol &= ~(0x3 << 8);
+ rc = sata_scr_write(link, SCR_CONTROL, scontrol);
+ if (rc)
+ return rc;
+
+ /* enable DIPM */
+ if (dev->flags & ATA_DFLAG_DIPM)
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_ENABLE, SATA_DIPM);
+ break;
+ case MEDIUM_POWER:
+ /* allow IPM to PARTIAL */
+ scontrol &= ~(0x1 << 8);
+ scontrol |= (0x2 << 8);
+ rc = sata_scr_write(link, SCR_CONTROL, scontrol);
+ if (rc)
+ return rc;
+
+ /* disable DIPM */
+ if (ata_dev_enabled(dev) && (dev->flags & ATA_DFLAG_DIPM))
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_DISABLE, SATA_DIPM);
+ break;
+ case NOT_AVAILABLE:
+ case MAX_PERFORMANCE:
+ /* disable all IPM transitions */
+ scontrol |= (0x3 << 8);
+ rc = sata_scr_write(link, SCR_CONTROL, scontrol);
+ if (rc)
+ return rc;
+
+ /* disable DIPM */
+ if (ata_dev_enabled(dev) && (dev->flags & ATA_DFLAG_DIPM))
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_DISABLE, SATA_DIPM);
+ break;
+ }
+
+ /* FIXME: handle SET FEATURES failure */
+ (void) err_mask;
+
+ return 0;
+}
+
+/**
+ * ata_dev_enable_pm - enable SATA interface power management
+ * @dev: device to enable power management
+ * @policy: the link power management policy
+ *
+ * Enable SATA Interface power management. This will enable
+ * Device Interface Power Management (DIPM) for min_power
+ * policy, and then call driver specific callbacks for
+ * enabling Host Initiated Power management.
+ *
+ * Locking: Caller.
+ * Returns: -EINVAL if IPM is not supported, 0 otherwise.
+ */
+void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy)
+{
+ int rc = 0;
+ struct ata_port *ap = dev->link->ap;
+
+ /* set HIPM first, then DIPM */
+ if (ap->ops->enable_pm)
+ rc = ap->ops->enable_pm(ap, policy);
+ if (rc)
+ goto enable_pm_out;
+ rc = ata_dev_set_dipm(dev, policy);
+
+enable_pm_out:
+ if (rc)
+ ap->pm_policy = MAX_PERFORMANCE;
+ else
+ ap->pm_policy = policy;
+ return /* rc */; /* hopefully we can use 'rc' eventually */
+}
+
+#ifdef CONFIG_PM
+/**
+ * ata_dev_disable_pm - disable SATA interface power management
+ * @dev: device to disable power management
+ *
+ * Disable SATA Interface power management. This will disable
+ * Device Interface Power Management (DIPM) without changing
+ * policy, call driver specific callbacks for disabling Host
+ * Initiated Power management.
+ *
+ * Locking: Caller.
+ * Returns: void
+ */
+static void ata_dev_disable_pm(struct ata_device *dev)
+{
+ struct ata_port *ap = dev->link->ap;
+
+ ata_dev_set_dipm(dev, MAX_PERFORMANCE);
+ if (ap->ops->disable_pm)
+ ap->ops->disable_pm(ap);
+}
+#endif /* CONFIG_PM */
+
+void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy)
+{
+ ap->pm_policy = policy;
+ ap->link.eh_info.action |= ATA_EHI_LPM;
+ ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY;
+ ata_port_schedule_eh(ap);
+}
+
+#ifdef CONFIG_PM
+static void ata_lpm_enable(struct ata_host *host)
+{
+ struct ata_link *link;
+ struct ata_port *ap;
+ struct ata_device *dev;
+ int i;
+
+ for (i = 0; i < host->n_ports; i++) {
+ ap = host->ports[i];
+ ata_port_for_each_link(link, ap) {
+ ata_link_for_each_dev(dev, link)
+ ata_dev_disable_pm(dev);
+ }
+ }
+}
+
+static void ata_lpm_disable(struct ata_host *host)
+{
+ int i;
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+ ata_lpm_schedule(ap, ap->pm_policy);
+ }
+}
+#endif /* CONFIG_PM */
+
+
/**
* ata_devchk - PATA device presence detection
* @ap: ATA channel to examine
@@ -1799,13 +1975,7 @@
* SET_FEATURES spin-up subcommand before it will accept
* anything other than the original IDENTIFY command.
*/
- ata_tf_init(dev, &tf);
- tf.command = ATA_CMD_SET_FEATURES;
- tf.feature = SETFEATURES_SPINUP;
- tf.protocol = ATA_PROT_NODATA;
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- err_mask = ata_exec_internal(dev, &tf, NULL,
- DMA_NONE, NULL, 0, 0);
+ err_mask = ata_dev_set_feature(dev, SETFEATURES_SPINUP, 0);
if (err_mask && id[2] != 0x738c) {
rc = -EIO;
reason = "SPINUP failed";
@@ -2075,7 +2245,8 @@
unsigned int err_mask;
/* issue SET feature command to turn this on */
- err_mask = ata_dev_set_AN(dev, SETFEATURES_SATA_ENABLE);
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_ENABLE, SATA_AN);
if (err_mask)
ata_dev_printk(dev, KERN_ERR,
"failed to enable ATAPI AN "
@@ -2105,6 +2276,13 @@
if (dev->flags & ATA_DFLAG_LBA48)
dev->max_sectors = ATA_MAX_SECTORS_LBA48;
+ if (!(dev->horkage & ATA_HORKAGE_IPM)) {
+ if (ata_id_has_hipm(dev->id))
+ dev->flags |= ATA_DFLAG_HIPM;
+ if (ata_id_has_dipm(dev->id))
+ dev->flags |= ATA_DFLAG_DIPM;
+ }
+
if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
/* Let the user know. We don't want to disallow opens for
rescue purposes, or in case the vendor is just a blithering
@@ -2126,10 +2304,21 @@
dev->max_sectors = ATA_MAX_SECTORS;
}
+ if ((dev->class == ATA_DEV_ATAPI) &&
+ (atapi_command_packet_set(id) == TYPE_TAPE))
+ dev->max_sectors = ATA_MAX_SECTORS_TAPE;
+
if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
dev->max_sectors);
+ if (ata_dev_blacklisted(dev) & ATA_HORKAGE_IPM) {
+ dev->horkage |= ATA_HORKAGE_IPM;
+
+ /* reset link pm_policy for this port to no pm */
+ ap->pm_policy = MAX_PERFORMANCE;
+ }
+
if (ap->ops->dev_config)
ap->ops->dev_config(dev);
@@ -2223,6 +2412,25 @@
tries[dev->devno] = ATA_PROBE_MAX_TRIES;
retry:
+ ata_link_for_each_dev(dev, &ap->link) {
+ /* If we issue an SRST then an ATA drive (not ATAPI)
+ * may change configuration and be in PIO0 timing. If
+ * we do a hard reset (or are coming from power on)
+ * this is true for ATA or ATAPI. Until we've set a
+ * suitable controller mode we should not touch the
+ * bus as we may be talking too fast.
+ */
+ dev->pio_mode = XFER_PIO_0;
+
+ /* If the controller has a pio mode setup function
+ * then use it to set the chipset to rights. Don't
+ * touch the DMA setup as that will be dealt with when
+ * configuring devices.
+ */
+ if (ap->ops->set_piomode)
+ ap->ops->set_piomode(ap, dev);
+ }
+
/* reset and determine device classes */
ap->ops->phy_reset(ap);
@@ -2238,12 +2446,6 @@
ata_port_probe(ap);
- /* after the reset the device state is PIO 0 and the controller
- state is undefined. Record the mode */
-
- ata_link_for_each_dev(dev, &ap->link)
- dev->pio_mode = XFER_PIO_0;
-
/* read IDENTIFY page and configure devices. We have to do the identify
specific sequence bass-ackwards so that PDIAG- is released by
the slave device */
@@ -2549,17 +2751,27 @@
static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol)
{
- u32 spd, limit;
+ struct ata_link *host_link = &link->ap->link;
+ u32 limit, target, spd;
- if (link->sata_spd_limit == UINT_MAX)
- limit = 0;
+ limit = link->sata_spd_limit;
+
+ /* Don't configure downstream link faster than upstream link.
+ * It doesn't speed up anything and some PMPs choke on such
+ * configuration.
+ */
+ if (!ata_is_host_link(link) && host_link->sata_spd)
+ limit &= (1 << host_link->sata_spd) - 1;
+
+ if (limit == UINT_MAX)
+ target = 0;
else
- limit = fls(link->sata_spd_limit);
+ target = fls(limit);
spd = (*scontrol >> 4) & 0xf;
- *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4);
+ *scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4);
- return spd != limit;
+ return spd != target;
}
/**
@@ -2582,7 +2794,7 @@
u32 scontrol;
if (sata_scr_read(link, SCR_CONTROL, &scontrol))
- return 0;
+ return 1;
return __sata_set_spd_needed(link, &scontrol);
}
@@ -2886,6 +3098,13 @@
dev->pio_mode <= XFER_PIO_2)
err_mask &= ~AC_ERR_DEV;
+ /* Early MWDMA devices do DMA but don't allow DMA mode setting.
+ Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */
+ if (dev->xfer_shift == ATA_SHIFT_MWDMA &&
+ dev->dma_mode == XFER_MW_DMA_0 &&
+ (dev->id[63] >> 8) & 1)
+ err_mask &= ~AC_ERR_DEV;
+
if (err_mask) {
ata_dev_printk(dev, KERN_ERR, "failed to set xfermode "
"(err_mask=0x%x)\n", err_mask);
@@ -3115,6 +3334,55 @@
}
/**
+ * ata_wait_after_reset - wait before checking status after reset
+ * @ap: port containing status register to be polled
+ * @deadline: deadline jiffies for the operation
+ *
+ * After reset, we need to pause a while before reading status.
+ * Also, certain combination of controller and device report 0xff
+ * for some duration (e.g. until SATA PHY is up and running)
+ * which is interpreted as empty port in ATA world. This
+ * function also waits for such devices to get out of 0xff
+ * status.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline)
+{
+ unsigned long until = jiffies + ATA_TMOUT_FF_WAIT;
+
+ if (time_before(until, deadline))
+ deadline = until;
+
+ /* Spec mandates ">= 2ms" before checking status. We wait
+ * 150ms, because that was the magic delay used for ATAPI
+ * devices in Hale Landis's ATADRVR, for the period of time
+ * between when the ATA command register is written, and then
+ * status is checked. Because waiting for "a while" before
+ * checking status is fine, post SRST, we perform this magic
+ * delay here as well.
+ *
+ * Old drivers/ide uses the 2mS rule and then waits for ready.
+ */
+ msleep(150);
+
+ /* Wait for 0xff to clear. Some SATA devices take a long time
+ * to clear 0xff after reset. For example, HHD424020F7SV00
+ * iVDR needs >= 800ms while. Quantum GoVault needs even more
+ * than that.
+ */
+ while (1) {
+ u8 status = ata_chk_status(ap);
+
+ if (status != 0xff || time_after(jiffies, deadline))
+ return;
+
+ msleep(50);
+ }
+}
+
+/**
* ata_wait_ready - sleep until BSY clears, or timeout
* @ap: port containing status register to be polled
* @deadline: deadline jiffies for the operation
@@ -3220,8 +3488,6 @@
unsigned long deadline)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- struct ata_device *dev;
- int i = 0;
DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
@@ -3232,36 +3498,8 @@
udelay(20); /* FIXME: flush */
iowrite8(ap->ctl, ioaddr->ctl_addr);
- /* If we issued an SRST then an ATA drive (not ATAPI)
- * may have changed configuration and be in PIO0 timing. If
- * we did a hard reset (or are coming from power on) this is
- * true for ATA or ATAPI. Until we've set a suitable controller
- * mode we should not touch the bus as we may be talking too fast.
- */
-
- ata_link_for_each_dev(dev, &ap->link)
- dev->pio_mode = XFER_PIO_0;
-
- /* If the controller has a pio mode setup function then use
- it to set the chipset to rights. Don't touch the DMA setup
- as that will be dealt with when revalidating */
- if (ap->ops->set_piomode) {
- ata_link_for_each_dev(dev, &ap->link)
- if (devmask & (1 << i++))
- ap->ops->set_piomode(ap, dev);
- }
-
- /* spec mandates ">= 2ms" before checking status.
- * We wait 150ms, because that was the magic delay used for
- * ATAPI devices in Hale Landis's ATADRVR, for the period of time
- * between when the ATA command register is written, and then
- * status is checked. Because waiting for "a while" before
- * checking status is fine, post SRST, we perform this magic
- * delay here as well.
- *
- * Old drivers/ide uses the 2mS rule and then waits for ready
- */
- msleep(150);
+ /* wait a while before checking status */
+ ata_wait_after_reset(ap, deadline);
/* Before we perform post reset processing we want to see if
* the bus shows 0xFF because the odd clown forgets the D7
@@ -3688,8 +3926,8 @@
return 0;
}
- /* wait a while before checking status, see SRST for more info */
- msleep(150);
+ /* wait a while before checking status */
+ ata_wait_after_reset(ap, deadline);
/* If PMP is supported, we have to do follow-up SRST. Note
* that some PMPs don't send D2H Reg FIS after hardreset at
@@ -3947,9 +4185,6 @@
{ "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA },
{ "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA },
- { "IOMEGA ZIP 250 ATAPI", NULL, ATA_HORKAGE_NODMA }, /* temporary fix */
- { "IOMEGA ZIP 250 ATAPI Floppy",
- NULL, ATA_HORKAGE_NODMA },
/* Odd clown on sil3726/4726 PMPs */
{ "Config Disk", NULL, ATA_HORKAGE_NODMA |
ATA_HORKAGE_SKIP_PM },
@@ -3992,6 +4227,7 @@
{ "ST3160812AS", "3.ADJ", ATA_HORKAGE_NONCQ, },
{ "ST980813AS", "3.ADB", ATA_HORKAGE_NONCQ, },
{ "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ, },
+ { "Maxtor 7V300F0", "VA111900", ATA_HORKAGE_NONCQ, },
/* devices which puke on READ_NATIVE_MAX */
{ "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, },
@@ -4007,7 +4243,7 @@
{ }
};
-int strn_pattern_cmp(const char *patt, const char *name, int wildchar)
+static int strn_pattern_cmp(const char *patt, const char *name, int wildchar)
{
const char *p;
int len;
@@ -4181,15 +4417,14 @@
DPRINTK("EXIT, err_mask=%x\n", err_mask);
return err_mask;
}
-
/**
- * ata_dev_set_AN - Issue SET FEATURES - SATA FEATURES
+ * ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES
* @dev: Device to which command will be sent
* @enable: Whether to enable or disable the feature
+ * @feature: The sector count represents the feature to set
*
* Issue SET FEATURES - SATA FEATURES command to device @dev
- * on port @ap with sector count set to indicate Asynchronous
- * Notification feature
+ * on port @ap with sector count
*
* LOCKING:
* PCI/etc. bus probe sem.
@@ -4197,7 +4432,8 @@
* RETURNS:
* 0 on success, AC_ERR_* mask otherwise.
*/
-static unsigned int ata_dev_set_AN(struct ata_device *dev, u8 enable)
+static unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable,
+ u8 feature)
{
struct ata_taskfile tf;
unsigned int err_mask;
@@ -4210,7 +4446,7 @@
tf.feature = enable;
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf.protocol = ATA_PROT_NODATA;
- tf.nsect = SATA_AN;
+ tf.nsect = feature;
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
@@ -4689,8 +4925,9 @@
* data in this function or read data in ata_sg_clean.
*/
offset = lsg->offset + lsg->length - qc->pad_len;
- sg_set_page(psg, nth_page(sg_page(lsg), offset >> PAGE_SHIFT));
- psg->offset = offset_in_page(offset);
+ sg_init_table(psg, 1);
+ sg_set_page(psg, nth_page(sg_page(lsg), offset >> PAGE_SHIFT),
+ qc->pad_len, offset_in_page(offset));
if (qc->tf.flags & ATA_TFLAG_WRITE) {
void *addr = kmap_atomic(sg_page(psg), KM_IRQ0);
@@ -5594,6 +5831,9 @@
* taken care of.
*/
if (ap->ops->error_handler) {
+ struct ata_device *dev = qc->dev;
+ struct ata_eh_info *ehi = &dev->link->eh_info;
+
WARN_ON(ap->pflags & ATA_PFLAG_FROZEN);
if (unlikely(qc->err_mask))
@@ -5612,6 +5852,27 @@
if (qc->flags & ATA_QCFLAG_RESULT_TF)
fill_result_tf(qc);
+ /* Some commands need post-processing after successful
+ * completion.
+ */
+ switch (qc->tf.command) {
+ case ATA_CMD_SET_FEATURES:
+ if (qc->tf.feature != SETFEATURES_WC_ON &&
+ qc->tf.feature != SETFEATURES_WC_OFF)
+ break;
+ /* fall through */
+ case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */
+ case ATA_CMD_SET_MULTI: /* multi_count changed */
+ /* revalidate device */
+ ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE;
+ ata_port_schedule_eh(ap);
+ break;
+
+ case ATA_CMD_SLEEP:
+ dev->flags |= ATA_DFLAG_SLEEPING;
+ break;
+ }
+
__ata_qc_complete(qc);
} else {
if (qc->flags & ATA_QCFLAG_EH_SCHEDULED)
@@ -5749,6 +6010,14 @@
qc->flags &= ~ATA_QCFLAG_DMAMAP;
}
+ /* if device is sleeping, schedule softreset and abort the link */
+ if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
+ link->eh_info.action |= ATA_EH_SOFTRESET;
+ ata_ehi_push_desc(&link->eh_info, "waking up from sleep");
+ ata_link_abort(link);
+ return;
+ }
+
ap->ops->qc_prep(qc);
qc->err_mask |= ap->ops->qc_issue(qc);
@@ -6296,6 +6565,12 @@
{
int rc;
+ /*
+ * disable link pm on all ports before requesting
+ * any pm activity
+ */
+ ata_lpm_enable(host);
+
rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
if (rc == 0)
host->dev->power.power_state = mesg;
@@ -6318,6 +6593,9 @@
ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET,
ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
host->dev->power.power_state = PMSG_ON;
+
+ /* reenable link pm */
+ ata_lpm_disable(host);
}
#endif
@@ -6860,6 +7138,7 @@
struct ata_port *ap = host->ports[i];
ata_scsi_scan_host(ap, 1);
+ ata_lpm_schedule(ap, ap->pm_policy);
}
return 0;
@@ -6921,7 +7200,7 @@
* LOCKING:
* Kernel thread context (may sleep).
*/
-void ata_port_detach(struct ata_port *ap)
+static void ata_port_detach(struct ata_port *ap)
{
unsigned long flags;
struct ata_link *link;
@@ -7256,7 +7535,6 @@
* likely to change as new drivers are added and updated.
* Do not depend on ABI/API stability.
*/
-
EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
EXPORT_SYMBOL_GPL(sata_deb_timing_long);
@@ -7326,6 +7604,7 @@
EXPORT_SYMBOL_GPL(ata_ratelimit);
EXPORT_SYMBOL_GPL(ata_wait_register);
EXPORT_SYMBOL_GPL(ata_busy_sleep);
+EXPORT_SYMBOL_GPL(ata_wait_after_reset);
EXPORT_SYMBOL_GPL(ata_wait_ready);
EXPORT_SYMBOL_GPL(ata_port_queue_task);
EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 93e2b54..ed8813b 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1747,6 +1747,7 @@
{
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
+ struct ata_device *dev;
unsigned int all_err_mask = 0;
int tag, is_io = 0;
u32 serror;
@@ -1800,10 +1801,8 @@
qc->err_mask &= ~AC_ERR_OTHER;
/* SENSE_VALID trumps dev/unknown error and revalidation */
- if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
+ if (qc->flags & ATA_QCFLAG_SENSE_VALID)
qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER);
- ehc->i.action &= ~ATA_EH_REVALIDATE;
- }
/* accumulate error info */
ehc->i.dev = qc->dev;
@@ -1816,21 +1815,28 @@
if (ap->pflags & ATA_PFLAG_FROZEN ||
all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT))
ehc->i.action |= ATA_EH_SOFTRESET;
- else if (all_err_mask)
+ else if ((is_io && all_err_mask) ||
+ (!is_io && (all_err_mask & ~AC_ERR_DEV)))
ehc->i.action |= ATA_EH_REVALIDATE;
- /* if we have offending qcs and the associated failed device */
+ /* If we have offending qcs and the associated failed device,
+ * perform per-dev EH action only on the offending device.
+ */
if (ehc->i.dev) {
- /* speed down */
- ehc->i.action |= ata_eh_speed_down(ehc->i.dev, is_io,
- all_err_mask);
-
- /* perform per-dev EH action only on the offending device */
ehc->i.dev_action[ehc->i.dev->devno] |=
ehc->i.action & ATA_EH_PERDEV_MASK;
ehc->i.action &= ~ATA_EH_PERDEV_MASK;
}
+ /* consider speeding down */
+ dev = ehc->i.dev;
+ if (!dev && ata_link_max_devices(link) == 1 &&
+ ata_dev_enabled(link->device))
+ dev = link->device;
+
+ if (dev)
+ ehc->i.action |= ata_eh_speed_down(dev, is_io, all_err_mask);
+
DPRINTK("EXIT\n");
}
@@ -1879,7 +1885,9 @@
for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
- if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link)
+ if (!(qc->flags & ATA_QCFLAG_FAILED) || qc->dev->link != link ||
+ ((qc->flags & ATA_QCFLAG_QUIET) &&
+ qc->err_mask == AC_ERR_DEV))
continue;
if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask)
continue;
@@ -2064,16 +2072,19 @@
ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
{
+ const int max_tries = ARRAY_SIZE(ata_eh_reset_timeouts);
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
unsigned int *classes = ehc->classes;
+ unsigned int lflags = link->flags;
int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
int try = 0;
struct ata_device *dev;
- unsigned long deadline;
- unsigned int action;
+ unsigned long deadline, now;
+ unsigned int tmp_action;
ata_reset_fn_t reset;
unsigned long flags;
+ u32 sstatus;
int rc;
/* about to reset */
@@ -2083,17 +2094,36 @@
ata_eh_about_to_do(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
+ ata_link_for_each_dev(dev, link) {
+ /* If we issue an SRST then an ATA drive (not ATAPI)
+ * may change configuration and be in PIO0 timing. If
+ * we do a hard reset (or are coming from power on)
+ * this is true for ATA or ATAPI. Until we've set a
+ * suitable controller mode we should not touch the
+ * bus as we may be talking too fast.
+ */
+ dev->pio_mode = XFER_PIO_0;
+
+ /* If the controller has a pio mode setup function
+ * then use it to set the chipset to rights. Don't
+ * touch the DMA setup as that will be dealt with when
+ * configuring devices.
+ */
+ if (ap->ops->set_piomode)
+ ap->ops->set_piomode(ap, dev);
+ }
+
/* Determine which reset to use and record in ehc->i.action.
* prereset() may examine and modify it.
*/
- action = ehc->i.action;
- ehc->i.action &= ~ATA_EH_RESET_MASK;
- if (softreset && (!hardreset || (!(link->flags & ATA_LFLAG_NO_SRST) &&
+ if (softreset && (!hardreset || (!(lflags & ATA_LFLAG_NO_SRST) &&
!sata_set_spd_needed(link) &&
- !(action & ATA_EH_HARDRESET))))
- ehc->i.action |= ATA_EH_SOFTRESET;
+ !(ehc->i.action & ATA_EH_HARDRESET))))
+ tmp_action = ATA_EH_SOFTRESET;
else
- ehc->i.action |= ATA_EH_HARDRESET;
+ tmp_action = ATA_EH_HARDRESET;
+
+ ehc->i.action = (ehc->i.action & ~ATA_EH_RESET_MASK) | tmp_action;
if (prereset) {
rc = prereset(link, jiffies + ATA_EH_PRERESET_TIMEOUT);
@@ -2161,80 +2191,64 @@
"follow-up softreset required "
"but no softreset avaliable\n");
rc = -EINVAL;
- goto out;
+ goto fail;
}
ata_eh_about_to_do(link, NULL, ATA_EH_RESET_MASK);
rc = ata_do_reset(link, reset, classes, deadline);
+ }
- if (rc == 0 && classify && classes[0] == ATA_DEV_UNKNOWN &&
- !(link->flags & ATA_LFLAG_ASSUME_CLASS)) {
- ata_link_printk(link, KERN_ERR,
+ /* -EAGAIN can happen if we skipped followup SRST */
+ if (rc && rc != -EAGAIN)
+ goto fail;
+
+ /* was classification successful? */
+ if (classify && classes[0] == ATA_DEV_UNKNOWN &&
+ !(lflags & ATA_LFLAG_ASSUME_CLASS)) {
+ if (try < max_tries) {
+ ata_link_printk(link, KERN_WARNING,
"classification failed\n");
rc = -EINVAL;
- goto out;
- }
- }
-
- /* if we skipped follow-up srst, clear rc */
- if (rc == -EAGAIN)
- rc = 0;
-
- if (rc && rc != -ERESTART && try < ARRAY_SIZE(ata_eh_reset_timeouts)) {
- unsigned long now = jiffies;
-
- if (time_before(now, deadline)) {
- unsigned long delta = deadline - jiffies;
-
- ata_link_printk(link, KERN_WARNING, "reset failed "
- "(errno=%d), retrying in %u secs\n",
- rc, (jiffies_to_msecs(delta) + 999) / 1000);
-
- while (delta)
- delta = schedule_timeout_uninterruptible(delta);
+ goto fail;
}
- if (rc == -EPIPE ||
- try == ARRAY_SIZE(ata_eh_reset_timeouts) - 1)
- sata_down_spd_limit(link);
- if (hardreset)
- reset = hardreset;
- goto retry;
+ ata_link_printk(link, KERN_WARNING,
+ "classfication failed, assuming ATA\n");
+ lflags |= ATA_LFLAG_ASSUME_ATA;
}
- if (rc == 0) {
- u32 sstatus;
+ ata_link_for_each_dev(dev, link) {
+ /* After the reset, the device state is PIO 0 and the
+ * controller state is undefined. Reset also wakes up
+ * drives from sleeping mode.
+ */
+ dev->pio_mode = XFER_PIO_0;
+ dev->flags &= ~ATA_DFLAG_SLEEPING;
- ata_link_for_each_dev(dev, link) {
- /* After the reset, the device state is PIO 0
- * and the controller state is undefined.
- * Record the mode.
- */
- dev->pio_mode = XFER_PIO_0;
+ if (ata_link_offline(link))
+ continue;
- if (ata_link_offline(link))
- continue;
-
- /* apply class override and convert UNKNOWN to NONE */
- if (link->flags & ATA_LFLAG_ASSUME_ATA)
- classes[dev->devno] = ATA_DEV_ATA;
- else if (link->flags & ATA_LFLAG_ASSUME_SEMB)
- classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */
- else if (classes[dev->devno] == ATA_DEV_UNKNOWN)
- classes[dev->devno] = ATA_DEV_NONE;
- }
-
- /* record current link speed */
- if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0)
- link->sata_spd = (sstatus >> 4) & 0xf;
-
- if (postreset)
- postreset(link, classes);
-
- /* reset successful, schedule revalidation */
- ata_eh_done(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
- ehc->i.action |= ATA_EH_REVALIDATE;
+ /* apply class override and convert UNKNOWN to NONE */
+ if (lflags & ATA_LFLAG_ASSUME_ATA)
+ classes[dev->devno] = ATA_DEV_ATA;
+ else if (lflags & ATA_LFLAG_ASSUME_SEMB)
+ classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */
+ else if (classes[dev->devno] == ATA_DEV_UNKNOWN)
+ classes[dev->devno] = ATA_DEV_NONE;
}
+
+ /* record current link speed */
+ if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0)
+ link->sata_spd = (sstatus >> 4) & 0xf;
+
+ if (postreset)
+ postreset(link, classes);
+
+ /* reset successful, schedule revalidation */
+ ata_eh_done(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
+ ehc->i.action |= ATA_EH_REVALIDATE;
+
+ rc = 0;
out:
/* clear hotplug flag */
ehc->i.flags &= ~ATA_EHI_HOTPLUGGED;
@@ -2244,6 +2258,28 @@
spin_unlock_irqrestore(ap->lock, flags);
return rc;
+
+ fail:
+ if (rc == -ERESTART || try >= max_tries)
+ goto out;
+
+ now = jiffies;
+ if (time_before(now, deadline)) {
+ unsigned long delta = deadline - now;
+
+ ata_link_printk(link, KERN_WARNING, "reset failed "
+ "(errno=%d), retrying in %u secs\n",
+ rc, (jiffies_to_msecs(delta) + 999) / 1000);
+
+ while (delta)
+ delta = schedule_timeout_uninterruptible(delta);
+ }
+
+ if (rc == -EPIPE || try == max_tries - 1)
+ sata_down_spd_limit(link);
+ if (hardreset)
+ reset = hardreset;
+ goto retry;
}
static int ata_eh_revalidate_and_attach(struct ata_link *link,
@@ -2416,7 +2452,7 @@
/* give it just one more chance */
ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
case -EIO:
- if (ehc->tries[dev->devno] == 1) {
+ if (ehc->tries[dev->devno] == 1 && dev->pio_mode > XFER_PIO_0) {
/* This is the last chance, better to slow
* down than lose it.
*/
@@ -2607,6 +2643,10 @@
ehc->i.flags &= ~ATA_EHI_SETMODE;
}
+ if (ehc->i.action & ATA_EHI_LPM)
+ ata_link_for_each_dev(dev, link)
+ ata_dev_enable_pm(dev, ap->pm_policy);
+
/* this link is okay now */
ehc->i.flags = 0;
continue;
@@ -2672,8 +2712,15 @@
/* FIXME: Once EH migration is complete,
* generate sense data in this function,
* considering both err_mask and tf.
+ *
+ * There's no point in retrying invalid
+ * (detected by libata) and non-IO device
+ * errors (rejected by device). Finish them
+ * immediately.
*/
- if (qc->err_mask & AC_ERR_INVALID)
+ if ((qc->err_mask & AC_ERR_INVALID) ||
+ (!(qc->flags & ATA_QCFLAG_IO) &&
+ qc->err_mask == AC_ERR_DEV))
ata_eh_qc_complete(qc);
else
ata_eh_qc_retry(qc);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index f5d5420..245057d 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -110,6 +110,74 @@
};
+static const struct {
+ enum link_pm value;
+ const char *name;
+} link_pm_policy[] = {
+ { NOT_AVAILABLE, "max_performance" },
+ { MIN_POWER, "min_power" },
+ { MAX_PERFORMANCE, "max_performance" },
+ { MEDIUM_POWER, "medium_power" },
+};
+
+static const char *ata_scsi_lpm_get(enum link_pm policy)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(link_pm_policy); i++)
+ if (link_pm_policy[i].value == policy)
+ return link_pm_policy[i].name;
+
+ return NULL;
+}
+
+static ssize_t ata_scsi_lpm_put(struct class_device *class_dev,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(class_dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ enum link_pm policy = 0;
+ int i;
+
+ /*
+ * we are skipping array location 0 on purpose - this
+ * is because a value of NOT_AVAILABLE is displayed
+ * to the user as max_performance, but when the user
+ * writes "max_performance", they actually want the
+ * value to match MAX_PERFORMANCE.
+ */
+ for (i = 1; i < ARRAY_SIZE(link_pm_policy); i++) {
+ const int len = strlen(link_pm_policy[i].name);
+ if (strncmp(link_pm_policy[i].name, buf, len) == 0 &&
+ buf[len] == '\n') {
+ policy = link_pm_policy[i].value;
+ break;
+ }
+ }
+ if (!policy)
+ return -EINVAL;
+
+ ata_lpm_schedule(ap, policy);
+ return count;
+}
+
+static ssize_t
+ata_scsi_lpm_show(struct class_device *class_dev, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(class_dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ const char *policy =
+ ata_scsi_lpm_get(ap->pm_policy);
+
+ if (!policy)
+ return -EINVAL;
+
+ return snprintf(buf, 23, "%s\n", policy);
+}
+CLASS_DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
+ ata_scsi_lpm_show, ata_scsi_lpm_put);
+EXPORT_SYMBOL_GPL(class_device_attr_link_power_management_policy);
+
static void ata_scsi_invalid_field(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
@@ -1040,6 +1108,9 @@
else
tf->command = ATA_CMD_FLUSH;
+ /* flush is critical for IO integrity, consider it an IO command */
+ qc->flags |= ATA_QCFLAG_IO;
+
return 0;
}
@@ -1361,33 +1432,10 @@
static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- struct ata_eh_info *ehi = &qc->dev->link->eh_info;
struct scsi_cmnd *cmd = qc->scsicmd;
u8 *cdb = cmd->cmnd;
int need_sense = (qc->err_mask != 0);
- /* We snoop the SET_FEATURES - Write Cache ON/OFF command, and
- * schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE
- * cache
- */
- if (ap->ops->error_handler && !need_sense) {
- switch (qc->tf.command) {
- case ATA_CMD_SET_FEATURES:
- if ((qc->tf.feature == SETFEATURES_WC_ON) ||
- (qc->tf.feature == SETFEATURES_WC_OFF)) {
- ehi->action |= ATA_EH_REVALIDATE;
- ata_port_schedule_eh(ap);
- }
- break;
-
- case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */
- case ATA_CMD_SET_MULTI: /* multi_count changed */
- ehi->action |= ATA_EH_REVALIDATE;
- ata_port_schedule_eh(ap);
- break;
- }
- }
-
/* For ATA pass thru (SAT) commands, generate a sense block if
* user mandated it or if there's an error. Note that if we
* generate because the user forced us to, a check condition
@@ -2719,8 +2767,8 @@
*/
qc->nbytes = scsi_bufflen(scmd);
- /* request result TF */
- qc->flags |= ATA_QCFLAG_RESULT_TF;
+ /* request result TF and be quiet about device error */
+ qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
return 0;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 90df58a..0e6cf3a 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -101,6 +101,8 @@
extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
extern struct ata_port *ata_port_alloc(struct ata_host *host);
+extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy);
+extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 0f6f7bc..e4542ab 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -181,7 +181,7 @@
int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
- if(!(acpi->gtm.flags & 0x10))
+ if (!(acpi->gtm.flags & 0x10))
unit = 0;
/* Now stuff the nS values into the structure */
@@ -202,7 +202,7 @@
int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
- if(!(acpi->gtm.flags & 0x10))
+ if (!(acpi->gtm.flags & 0x10))
unit = 0;
/* Now stuff the nS values into the structure */
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index be30923..842fe08 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -332,12 +332,13 @@
{
}
-static void pata_icside_postreset(struct ata_port *ap, unsigned int *classes)
+static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
{
+ struct ata_port *ap = link->ap;
struct pata_icside_state *state = ap->host->private_data;
if (classes[0] != ATA_DEV_NONE || classes[1] != ATA_DEV_NONE)
- return ata_std_postreset(ap, classes);
+ return ata_std_postreset(link, classes);
state->port[ap->port_no].disabled = 1;
@@ -395,29 +396,30 @@
static void __devinit
pata_icside_setup_ioaddr(struct ata_port *ap, void __iomem *base,
- const struct portinfo *info)
+ struct pata_icside_info *info,
+ const struct portinfo *port)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- void __iomem *cmd = base + info->dataoffset;
+ void __iomem *cmd = base + port->dataoffset;
ioaddr->cmd_addr = cmd;
- ioaddr->data_addr = cmd + (ATA_REG_DATA << info->stepping);
- ioaddr->error_addr = cmd + (ATA_REG_ERR << info->stepping);
- ioaddr->feature_addr = cmd + (ATA_REG_FEATURE << info->stepping);
- ioaddr->nsect_addr = cmd + (ATA_REG_NSECT << info->stepping);
- ioaddr->lbal_addr = cmd + (ATA_REG_LBAL << info->stepping);
- ioaddr->lbam_addr = cmd + (ATA_REG_LBAM << info->stepping);
- ioaddr->lbah_addr = cmd + (ATA_REG_LBAH << info->stepping);
- ioaddr->device_addr = cmd + (ATA_REG_DEVICE << info->stepping);
- ioaddr->status_addr = cmd + (ATA_REG_STATUS << info->stepping);
- ioaddr->command_addr = cmd + (ATA_REG_CMD << info->stepping);
+ ioaddr->data_addr = cmd + (ATA_REG_DATA << port->stepping);
+ ioaddr->error_addr = cmd + (ATA_REG_ERR << port->stepping);
+ ioaddr->feature_addr = cmd + (ATA_REG_FEATURE << port->stepping);
+ ioaddr->nsect_addr = cmd + (ATA_REG_NSECT << port->stepping);
+ ioaddr->lbal_addr = cmd + (ATA_REG_LBAL << port->stepping);
+ ioaddr->lbam_addr = cmd + (ATA_REG_LBAM << port->stepping);
+ ioaddr->lbah_addr = cmd + (ATA_REG_LBAH << port->stepping);
+ ioaddr->device_addr = cmd + (ATA_REG_DEVICE << port->stepping);
+ ioaddr->status_addr = cmd + (ATA_REG_STATUS << port->stepping);
+ ioaddr->command_addr = cmd + (ATA_REG_CMD << port->stepping);
- ioaddr->ctl_addr = base + info->ctrloffset;
+ ioaddr->ctl_addr = base + port->ctrloffset;
ioaddr->altstatus_addr = ioaddr->ctl_addr;
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
- info->raw_base + info->dataoffset,
- info->raw_base + info->ctrloffset);
+ info->raw_base + port->dataoffset,
+ info->raw_base + port->ctrloffset);
if (info->raw_ioc_base)
ata_port_desc(ap, "iocbase 0x%lx", info->raw_ioc_base);
@@ -441,7 +443,7 @@
info->nr_ports = 1;
info->port[0] = &pata_icside_portinfo_v5;
- info->raw_base = ecard_resource_start(ec, ECARD_RES_MEMC);
+ info->raw_base = ecard_resource_start(info->ec, ECARD_RES_MEMC);
return 0;
}
@@ -522,7 +524,7 @@
ap->flags |= ATA_FLAG_SLAVE_POSS;
ap->ops = &pata_icside_port_ops;
- pata_icside_setup_ioaddr(ap, info->base, info->port[i]);
+ pata_icside_setup_ioaddr(ap, info->base, info, info->port[i]);
}
return ata_host_activate(host, ec->irq, ata_interrupt, 0,
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index b9a17eb..d0e2e50 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -215,6 +215,8 @@
#include <asm/superio.h>
+#define SUPERIO_IDE_MAX_RETRIES 25
+
/**
* ns87560_read_buggy - workaround buggy Super I/O chip
* @port: Port to read
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 6b07b5b..f9b485a 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -449,7 +449,7 @@
/* Find function 1 */
dev1 = pci_get_device(0x1045, 0xC701, NULL);
- if(dev1 == NULL)
+ if (dev1 == NULL)
return 0;
/* Rev must be >= 0x10 */
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 5db2013..fd36099 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -74,8 +74,7 @@
return ata_do_set_mode(link, r_failed_dev);
if (memcmp(master->id + ATA_ID_FW_REV, slave->id + ATA_ID_FW_REV,
- ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0)
- {
+ ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0) {
/* Suspicious match, but could be two cards from
the same vendor - check serial */
if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO,
@@ -248,7 +247,8 @@
goto next_entry;
io_base = pdev->io.BasePort1;
ctl_base = pdev->io.BasePort1 + 0x0e;
- } else goto next_entry;
+ } else
+ goto next_entry;
/* If we've got this far, we're done */
break;
}
@@ -285,8 +285,8 @@
printk(KERN_WARNING DRV_NAME ": second channel not yet supported.\n");
/*
- * Having done the PCMCIA plumbing the ATA side is relatively
- * sane.
+ * Having done the PCMCIA plumbing the ATA side is relatively
+ * sane.
*/
ret = -ENOMEM;
host = ata_host_alloc(&pdev->dev, 1);
@@ -363,7 +363,7 @@
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
- PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
+ PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 3d3f155..2622577 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -348,7 +348,7 @@
ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
ATA_ID_PROD_LEN + 1);
/* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
- if(strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
+ if (strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
return ata_pci_default_filter(adev, mask);
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 65d9516..bc7c2d5 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -351,9 +351,9 @@
struct pci_dev *bridge = dev->bus->self;
/* Don't grab anything behind a Promise I2O RAID */
if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) {
- if( bridge->device == PCI_DEVICE_ID_INTEL_I960)
+ if (bridge->device == PCI_DEVICE_ID_INTEL_I960)
return -ENODEV;
- if( bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
+ if (bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
return -ENODEV;
}
}
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 5557613..ea2ef9f 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -570,17 +570,8 @@
udelay(20);
out_be32(ioaddr->ctl_addr, ap->ctl);
- /* spec mandates ">= 2ms" before checking status.
- * We wait 150ms, because that was the magic delay used for
- * ATAPI devices in Hale Landis's ATADRVR, for the period of time
- * between when the ATA command register is written, and then
- * status is checked. Because waiting for "a while" before
- * checking status is fine, post SRST, we perform this magic
- * delay here as well.
- *
- * Old drivers/ide uses the 2mS rule and then waits for ready
- */
- msleep(150);
+ /* wait a while before checking status */
+ ata_wait_after_reset(ap, deadline);
/* Before we perform post reset processing we want to see if
* the bus shows 0xFF because the odd clown forgets the D7
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index ea7a9a6..a4175fb 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -176,7 +176,7 @@
if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
return ATA_CBL_PATA40;
/* UDMA 66 chips have only drive side logic */
- else if((config->flags & VIA_UDMA) < VIA_UDMA_100)
+ else if ((config->flags & VIA_UDMA) < VIA_UDMA_100)
return ATA_CBL_PATA_UNK;
/* UDMA 100 or later */
pci_read_config_dword(pdev, 0x50, &ata66);
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 549cbbe..311cdb3 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -279,7 +279,7 @@
if (request_region(port, 2, "pata_winbond")) {
ret = winbond_init_one(port);
- if(ret <= 0)
+ if (ret <= 0)
release_region(port, 2);
else ct+= ret;
}
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 199f7e1..bd4c2a3 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -47,10 +47,10 @@
#define DRV_VERSION "1.0"
/* macro to calculate base address for ATA regs */
-#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40))
+#define ADMA_ATA_REGS(base, port_no) ((base) + ((port_no) * 0x40))
/* macro to calculate base address for ADMA regs */
-#define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20))
+#define ADMA_REGS(base, port_no) ((base) + 0x80 + ((port_no) * 0x20))
/* macro to obtain addresses from ata_port */
#define ADMA_PORT_REGS(ap) \
@@ -128,7 +128,7 @@
adma_state_t state;
};
-static int adma_ata_init_one (struct pci_dev *pdev,
+static int adma_ata_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent);
static int adma_port_start(struct ata_port *ap);
static void adma_host_stop(struct ata_host *host);
@@ -340,8 +340,8 @@
buf[i++] = 0; /* pPKLW */
buf[i++] = 0; /* reserved */
- *(__le32 *)(buf + i)
- = (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4);
+ *(__le32 *)(buf + i) =
+ (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4);
i += 4;
VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", i/4,
@@ -617,7 +617,7 @@
return -ENOMEM;
/* paranoia? */
if ((pp->pkt_dma & 7) != 0) {
- printk("bad alignment for pp->pkt_dma: %08x\n",
+ printk(KERN_ERR "bad alignment for pp->pkt_dma: %08x\n",
(u32)pp->pkt_dma);
return -ENOMEM;
}
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index b4c37b9..d015b4a 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -34,7 +34,8 @@
SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY),
+ ATA_FLAG_NCQ),
+ SATA_FSL_HOST_LFLAGS = ATA_LFLAG_SKIP_D2H_BSY,
SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
@@ -264,10 +265,11 @@
void __iomem *hcr_base;
void __iomem *ssr_base;
void __iomem *csr_base;
+ int irq;
};
static inline unsigned int sata_fsl_tag(unsigned int tag,
- void __iomem * hcr_base)
+ void __iomem *hcr_base)
{
/* We let libATA core do actual (queue) tag allocation */
@@ -306,7 +308,7 @@
pp->cmdslot[tag].prde_fis_len =
cpu_to_le32((num_prde << 16) | (fis_len << 2));
pp->cmdslot[tag].ttl = cpu_to_le32(data_xfer_len & ~0x03);
- pp->cmdslot[tag].desc_info = cpu_to_le32((desc_info | (tag & 0x1F)));
+ pp->cmdslot[tag].desc_info = cpu_to_le32(desc_info | (tag & 0x1F));
VPRINTK("cda=0x%x, prde_fis_len=0x%x, ttl=0x%x, di=0x%x\n",
pp->cmdslot[tag].cda,
@@ -316,7 +318,7 @@
}
static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
- u32 * ttl, dma_addr_t cmd_desc_paddr)
+ u32 *ttl, dma_addr_t cmd_desc_paddr)
{
struct scatterlist *sg;
unsigned int num_prde = 0;
@@ -353,7 +355,7 @@
"s/g len unaligned : 0x%x\n", sg_len);
if ((num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1)) &&
- !ata_sg_is_last(sg, qc)) {
+ (qc->n_iter + 1 != qc->n_elem)) {
VPRINTK("setting indirect prde\n");
prd_ptr_to_indirect_ext = prd;
prd->dba = cpu_to_le32(indirect_ext_segment_paddr);
@@ -404,7 +406,7 @@
cd = (struct command_desc *)pp->cmdentry + tag;
cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
- ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) & cd->cfis);
+ ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis);
VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
cd->cfis[0], cd->cfis[1], cd->cfis[2]);
@@ -470,16 +472,10 @@
switch (sc_reg_in) {
case SCR_STATUS:
- sc_reg = 0;
- break;
case SCR_ERROR:
- sc_reg = 1;
- break;
case SCR_CONTROL:
- sc_reg = 2;
- break;
case SCR_ACTIVE:
- sc_reg = 3;
+ sc_reg = sc_reg_in;
break;
default:
return -EINVAL;
@@ -487,7 +483,7 @@
VPRINTK("xx_scr_write, reg_in = %d\n", sc_reg);
- iowrite32(val, (void __iomem *)ssr_base + (sc_reg * 4));
+ iowrite32(val, ssr_base + (sc_reg * 4));
return 0;
}
@@ -500,16 +496,10 @@
switch (sc_reg_in) {
case SCR_STATUS:
- sc_reg = 0;
- break;
case SCR_ERROR:
- sc_reg = 1;
- break;
case SCR_CONTROL:
- sc_reg = 2;
- break;
case SCR_ACTIVE:
- sc_reg = 3;
+ sc_reg = sc_reg_in;
break;
default:
return -EINVAL;
@@ -517,7 +507,7 @@
VPRINTK("xx_scr_read, reg_in = %d\n", sc_reg);
- *val = ioread32((void __iomem *)ssr_base + (sc_reg * 4));
+ *val = ioread32(ssr_base + (sc_reg * 4));
return 0;
}
@@ -571,7 +561,6 @@
struct ata_port *ap)
{
struct sata_fsl_port_priv *pp = ap->private_data;
- u8 fis[6 * 4];
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
@@ -579,8 +568,7 @@
cd = pp->cmdentry + tag;
- memcpy(fis, &cd->sfis, 6 * 4); /* should we use memcpy_from_io() */
- ata_tf_from_fis(fis, &pp->tf);
+ ata_tf_from_fis(cd->sfis, &pp->tf);
}
static u8 sata_fsl_check_status(struct ata_port *ap)
@@ -664,6 +652,7 @@
VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
VPRINTK("CHBA = 0x%x\n", ioread32(hcr_base + CHBA));
+#ifdef CONFIG_MPC8315_DS
/*
* Workaround for 8315DS board 3gbps link-up issue,
* currently limit SATA port to GEN1 speed
@@ -676,6 +665,7 @@
sata_fsl_scr_read(ap, SCR_CONTROL, &temp);
dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n",
temp);
+#endif
return 0;
}
@@ -728,9 +718,10 @@
return ata_dev_classify(&tf);
}
-static int sata_fsl_softreset(struct ata_port *ap, unsigned int *class,
+static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
+ struct ata_port *ap = link->ap;
struct sata_fsl_port_priv *pp = ap->private_data;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
@@ -739,10 +730,6 @@
u8 *cfis;
u32 Serror;
int i = 0;
- struct ata_queued_cmd qc;
- u8 *buf;
- dma_addr_t dma_address;
- struct scatterlist *sg;
unsigned long start_jiffies;
DPRINTK("in xx_softreset\n");
@@ -811,7 +798,7 @@
*/
temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0, 1, 500);
- if ((!(temp & 0x10)) || ata_port_offline(ap)) {
+ if ((!(temp & 0x10)) || ata_link_offline(link)) {
ata_port_printk(ap, KERN_WARNING,
"No Device OR PHYRDY change,Hstatus = 0x%x\n",
ioread32(hcr_base + HSTATUS));
@@ -842,13 +829,10 @@
* reached here, we can send a command to the target device
*/
- if (ap->sactive)
- goto skip_srst_do_ncq_error_handling;
-
DPRINTK("Sending SRST/device reset\n");
- ata_tf_init(ap->device, &tf);
- cfis = (u8 *) & pp->cmdentry->cfis;
+ ata_tf_init(link->device, &tf);
+ cfis = (u8 *) &pp->cmdentry->cfis;
/* device reset/SRST is a control register update FIS, uses tag0 */
sata_fsl_setup_cmd_hdr_entry(pp, 0,
@@ -912,76 +896,13 @@
* command bit of the CCreg
*/
iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
- goto check_device_signature;
-
-skip_srst_do_ncq_error_handling:
-
- VPRINTK("Sending read log ext(10h) command\n");
-
- memset(&qc, 0, sizeof(struct ata_queued_cmd));
- ata_tf_init(ap->device, &tf);
-
- tf.command = ATA_CMD_READ_LOG_EXT;
- tf.lbal = ATA_LOG_SATA_NCQ;
- tf.nsect = 1;
- tf.hob_nsect = 0;
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
- tf.protocol = ATA_PROT_PIO;
-
- qc.tag = ATA_TAG_INTERNAL;
- qc.scsicmd = NULL;
- qc.ap = ap;
- qc.dev = ap->device;
-
- qc.tf = tf;
- qc.flags |= ATA_QCFLAG_RESULT_TF;
- qc.dma_dir = DMA_FROM_DEVICE;
-
- buf = ap->sector_buf;
- ata_sg_init_one(&qc, buf, 1 * ATA_SECT_SIZE);
-
- /*
- * Need to DMA-map the memory buffer associated with the command
- */
-
- sg = qc.__sg;
- dma_address = dma_map_single(ap->dev, qc.buf_virt,
- sg->length, DMA_FROM_DEVICE);
-
- sg_dma_address(sg) = dma_address;
- sg_dma_len(sg) = sg->length;
-
- VPRINTK("EH, addr = 0x%x, len = 0x%x\n", dma_address, sg->length);
-
- sata_fsl_qc_prep(&qc);
- sata_fsl_qc_issue(&qc);
-
- temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
- if (temp & 0x1) {
- VPRINTK("READ_LOG_EXT_10H issue failed\n");
-
- VPRINTK("READ_LOG@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
- ioread32(CQ + hcr_base),
- ioread32(CA + hcr_base), ioread32(CC + hcr_base));
-
- sata_fsl_scr_read(ap, SCR_ERROR, &Serror);
-
- VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
- VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
- VPRINTK("Serror = 0x%x\n", Serror);
- goto err;
- }
-
- iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
-
- check_device_signature:
DPRINTK("SATA FSL : Now checking device signature\n");
*class = ATA_DEV_NONE;
/* Verify if SStatus indicates device presence */
- if (ata_port_online(ap)) {
+ if (ata_link_online(link)) {
/*
* if we are here, device presence has been detected,
* 1st D2H FIS would have been received, but sfis in
@@ -1002,25 +923,13 @@
return -EIO;
}
-static int sata_fsl_hardreset(struct ata_port *ap, unsigned int *class,
- unsigned long deadline)
-{
- int retval;
-
- retval = sata_std_hardreset(ap, class, deadline);
-
- DPRINTK("SATA FSL : in xx_hardreset, retval = 0x%d\n", retval);
-
- return retval;
-}
-
static void sata_fsl_error_handler(struct ata_port *ap)
{
DPRINTK("in xx_error_handler\n");
/* perform recovery */
- ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_fsl_hardreset,
+ ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_std_hardreset,
ata_std_postreset);
}
@@ -1042,7 +951,8 @@
static void sata_fsl_error_intr(struct ata_port *ap)
{
- struct ata_eh_info *ehi = &ap->eh_info;
+ struct ata_link *link = &ap->link;
+ struct ata_eh_info *ehi = &link->eh_info;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
u32 hstatus, dereg, cereg = 0, SError = 0;
@@ -1111,7 +1021,7 @@
}
/* record error info */
- qc = ata_qc_from_tag(ap, ap->active_tag);
+ qc = ata_qc_from_tag(ap, link->active_tag);
if (qc) {
sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap);
@@ -1139,6 +1049,7 @@
static void sata_fsl_host_intr(struct ata_port *ap)
{
+ struct ata_link *link = &ap->link;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
u32 hstatus, qc_active = 0;
@@ -1161,7 +1072,7 @@
return;
}
- if (ap->sactive) { /* only true for NCQ commands */
+ if (link->sactive) { /* only true for NCQ commands */
int i;
/* Read command completed register */
qc_active = ioread32(hcr_base + CC);
@@ -1190,10 +1101,10 @@
} else if (ap->qc_active) {
iowrite32(1, hcr_base + CC);
- qc = ata_qc_from_tag(ap, ap->active_tag);
+ qc = ata_qc_from_tag(ap, link->active_tag);
DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
- ap->active_tag, ioread32(hcr_base + CC));
+ link->active_tag, ioread32(hcr_base + CC));
if (qc) {
sata_fsl_qc_complete(qc);
@@ -1312,15 +1223,9 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
-#ifdef CONFIG_PM
- .suspend = ata_scsi_device_suspend,
- .resume = ata_scsi_device_resume,
-#endif
};
static const struct ata_port_operations sata_fsl_ops = {
- .port_disable = ata_port_disable,
-
.check_status = sata_fsl_check_status,
.check_altstatus = sata_fsl_check_status,
.dev_select = ata_noop_dev_select,
@@ -1330,8 +1235,6 @@
.qc_prep = sata_fsl_qc_prep,
.qc_issue = sata_fsl_qc_issue,
.irq_clear = sata_fsl_irq_clear,
- .irq_on = ata_dummy_irq_on,
- .irq_ack = ata_dummy_irq_ack,
.scr_read = sata_fsl_scr_read,
.scr_write = sata_fsl_scr_write,
@@ -1348,6 +1251,7 @@
static const struct ata_port_info sata_fsl_port_info[] = {
{
.flags = SATA_FSL_HOST_FLAGS,
+ .link_flags = SATA_FSL_HOST_LFLAGS,
.pio_mask = 0x1f, /* pio 0-4 */
.udma_mask = 0x7f, /* udma 0-6 */
.port_ops = &sata_fsl_ops,
@@ -1398,6 +1302,7 @@
dev_printk(KERN_ERR, &ofdev->dev, "invalid irq from platform\n");
goto error_exit_with_cleanup;
}
+ host_priv->irq = irq;
/* allocate host structure */
host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS);
@@ -1444,7 +1349,7 @@
dev_set_drvdata(&ofdev->dev, NULL);
- irq_dispose_mapping(host->irq);
+ irq_dispose_mapping(host_priv->irq);
iounmap(host_priv->hcr_base);
kfree(host_priv);
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 08595f3..323c087 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -143,7 +143,7 @@
[SCR_CONTROL] = 2,
};
-static void __iomem * inic_port_base(struct ata_port *ap)
+static void __iomem *inic_port_base(struct ata_port *ap)
{
return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE;
}
@@ -448,7 +448,7 @@
struct ata_taskfile tf;
/* wait a while before checking status */
- msleep(150);
+ ata_wait_after_reset(ap, deadline);
rc = ata_wait_ready(ap, deadline);
/* link occupied, -ENODEV too is an error */
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index b39648f..a43f64d 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1156,7 +1156,7 @@
last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
}
-static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
+static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
{
u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
(last ? CRQB_CMD_LAST : 0);
@@ -2429,7 +2429,7 @@
struct mv_host_priv *hpriv = host->private_data;
u32 hp_flags = hpriv->hp_flags;
- switch(board_idx) {
+ switch (board_idx) {
case chip_5080:
hpriv->ops = &mv5xxx_ops;
hp_flags |= MV_HP_GEN_I;
@@ -2510,7 +2510,8 @@
break;
default:
- printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx);
+ dev_printk(KERN_ERR, &pdev->dev,
+ "BUG: invalid board index %u\n", board_idx);
return 1;
}
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 2e0279fd..35b2df2 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -291,7 +291,7 @@
};
-#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & ( 1 << (19 + (12 * (PORT)))))
+#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & (1 << (19 + (12 * (PORT)))))
static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
#ifdef CONFIG_PM
@@ -365,9 +365,9 @@
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), SWNCQ },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), SWNCQ },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), SWNCQ },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), SWNCQ },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), SWNCQ },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), SWNCQ },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
+ { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
{ } /* terminate list */
};
@@ -884,8 +884,9 @@
/* Notifier bits set without a command may indicate the drive
is misbehaving. Raise host state machine violation on this
condition. */
- ata_port_printk(ap, KERN_ERR, "notifier for tag %d with no command?\n",
- cpb_num);
+ ata_port_printk(ap, KERN_ERR,
+ "notifier for tag %d with no cmd?\n",
+ cpb_num);
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_SOFTRESET;
ata_port_freeze(ap);
@@ -1012,7 +1013,7 @@
u32 check_commands;
int pos, error = 0;
- if(ata_tag_valid(ap->link.active_tag))
+ if (ata_tag_valid(ap->link.active_tag))
check_commands = 1 << ap->link.active_tag;
else
check_commands = ap->link.sactive;
@@ -1021,14 +1022,14 @@
while ((pos = ffs(check_commands)) && !error) {
pos--;
error = nv_adma_check_cpb(ap, pos,
- notifier_error & (1 << pos) );
- check_commands &= ~(1 << pos );
+ notifier_error & (1 << pos));
+ check_commands &= ~(1 << pos);
}
}
}
}
- if(notifier_clears[0] || notifier_clears[1]) {
+ if (notifier_clears[0] || notifier_clears[1]) {
/* Note: Both notifier clear registers must be written
if either is set, even if one is zero, according to NVIDIA. */
struct nv_adma_port_priv *pp = host->ports[0]->private_data;
@@ -1061,7 +1062,7 @@
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp & ~(NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN),
mmio + NV_ADMA_CTL);
- readw(mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
static void nv_adma_thaw(struct ata_port *ap)
@@ -1079,7 +1080,7 @@
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | (NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN),
mmio + NV_ADMA_CTL);
- readw(mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
static void nv_adma_irq_clear(struct ata_port *ap)
@@ -1119,7 +1120,7 @@
{
struct nv_adma_port_priv *pp = qc->ap->private_data;
- if(pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+ if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
ata_bmdma_post_internal_cmd(qc);
}
@@ -1165,7 +1166,7 @@
pp->cpb_dma = mem_dma;
writel(mem_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW);
- writel((mem_dma >> 16 ) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
+ writel((mem_dma >> 16) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
mem += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
mem_dma += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
@@ -1189,15 +1190,15 @@
/* clear GO for register mode, enable interrupt */
tmp = readw(mmio + NV_ADMA_CTL);
- writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
- NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
+ writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+ NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
return 0;
}
@@ -1237,7 +1238,7 @@
/* set CPB block location */
writel(pp->cpb_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW);
- writel((pp->cpb_dma >> 16 ) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
+ writel((pp->cpb_dma >> 16) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
/* clear any outstanding interrupt conditions */
writew(0xffff, mmio + NV_ADMA_STAT);
@@ -1250,15 +1251,15 @@
/* clear GO for register mode, enable interrupt */
tmp = readw(mmio + NV_ADMA_CTL);
- writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
- NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
+ writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+ NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
return 0;
}
@@ -1342,7 +1343,8 @@
idx = 0;
ata_for_each_sg(sg, qc) {
- aprd = (idx < 5) ? &cpb->aprd[idx] : &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)];
+ aprd = (idx < 5) ? &cpb->aprd[idx] :
+ &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)];
nv_adma_fill_aprd(qc, sg, idx, aprd);
idx++;
}
@@ -1359,12 +1361,12 @@
/* ADMA engine can only be used for non-ATAPI DMA commands,
or interrupt-driven no-data commands, where a result taskfile
is not required. */
- if((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
+ if ((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
(qc->tf.flags & ATA_TFLAG_POLLING) ||
(qc->flags & ATA_QCFLAG_RESULT_TF))
return 1;
- if((qc->flags & ATA_QCFLAG_DMAMAP) ||
+ if ((qc->flags & ATA_QCFLAG_DMAMAP) ||
(qc->tf.protocol == ATA_PROT_NODATA))
return 0;
@@ -1401,14 +1403,14 @@
nv_adma_tf_to_cpb(&qc->tf, cpb->tf);
- if(qc->flags & ATA_QCFLAG_DMAMAP) {
+ if (qc->flags & ATA_QCFLAG_DMAMAP) {
nv_adma_fill_sg(qc, cpb);
ctl_flags |= NV_CPB_CTL_APRD_VALID;
} else
memset(&cpb->aprd[0], 0, sizeof(struct nv_adma_prd) * 5);
- /* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID until we are
- finished filling in all of the contents */
+ /* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID
+ until we are finished filling in all of the contents */
wmb();
cpb->ctl_flags = ctl_flags;
wmb();
@@ -1435,16 +1437,16 @@
and (number of cpbs to append -1) in top 8 bits */
wmb();
- if(curr_ncq != pp->last_issue_ncq) {
- /* Seems to need some delay before switching between NCQ and non-NCQ
- commands, else we get command timeouts and such. */
+ if (curr_ncq != pp->last_issue_ncq) {
+ /* Seems to need some delay before switching between NCQ and
+ non-NCQ commands, else we get command timeouts and such. */
udelay(20);
pp->last_issue_ncq = curr_ncq;
}
writew(qc->tag, mmio + NV_ADMA_APPEND);
- DPRINTK("Issued tag %u\n",qc->tag);
+ DPRINTK("Issued tag %u\n", qc->tag);
return 0;
}
@@ -1641,12 +1643,12 @@
static void nv_adma_error_handler(struct ata_port *ap)
{
struct nv_adma_port_priv *pp = ap->private_data;
- if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
+ if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
void __iomem *mmio = pp->ctl_block;
int i;
u16 tmp;
- if(ata_tag_valid(ap->link.active_tag) || ap->link.sactive) {
+ if (ata_tag_valid(ap->link.active_tag) || ap->link.sactive) {
u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
u32 gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
@@ -1654,16 +1656,17 @@
u8 cpb_count = readb(mmio + NV_ADMA_CPB_COUNT);
u8 next_cpb_idx = readb(mmio + NV_ADMA_NEXT_CPB_IDX);
- ata_port_printk(ap, KERN_ERR, "EH in ADMA mode, notifier 0x%X "
+ ata_port_printk(ap, KERN_ERR,
+ "EH in ADMA mode, notifier 0x%X "
"notifier_error 0x%X gen_ctl 0x%X status 0x%X "
"next cpb count 0x%X next cpb idx 0x%x\n",
notifier, notifier_error, gen_ctl, status,
cpb_count, next_cpb_idx);
- for( i=0;i<NV_ADMA_MAX_CPBS;i++) {
+ for (i = 0; i < NV_ADMA_MAX_CPBS; i++) {
struct nv_adma_cpb *cpb = &pp->cpb[i];
- if( (ata_tag_valid(ap->link.active_tag) && i == ap->link.active_tag) ||
- ap->link.sactive & (1 << i) )
+ if ((ata_tag_valid(ap->link.active_tag) && i == ap->link.active_tag) ||
+ ap->link.sactive & (1 << i))
ata_port_printk(ap, KERN_ERR,
"CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
i, cpb->ctl_flags, cpb->resp_flags);
@@ -1673,8 +1676,9 @@
/* Push us back into port register mode for error handling. */
nv_adma_register_mode(ap);
- /* Mark all of the CPBs as invalid to prevent them from being executed */
- for( i=0;i<NV_ADMA_MAX_CPBS;i++)
+ /* Mark all of the CPBs as invalid to prevent them from
+ being executed */
+ for (i = 0; i < NV_ADMA_MAX_CPBS; i++)
pp->cpb[i].ctl_flags &= ~NV_CPB_CTL_CPB_VALID;
/* clear CPB fetch count */
@@ -1683,10 +1687,10 @@
/* Reset channel */
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
udelay(1);
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
- readw( mmio + NV_ADMA_CTL ); /* flush posted write */
+ readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
@@ -2350,9 +2354,9 @@
return IRQ_RETVAL(handled);
}
-static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
- static int printed_version = 0;
+ static int printed_version;
const struct ata_port_info *ppi[] = { NULL, NULL };
struct ata_host *host;
struct nv_host_priv *hpriv;
@@ -2364,7 +2368,7 @@
// Make sure this is a SATA controller by counting the number of bars
// (NVIDIA SATA controllers will always have six bars). Otherwise,
// it's an IDE controller and we ignore it.
- for (bar=0; bar<6; bar++)
+ for (bar = 0; bar < 6; bar++)
if (pci_resource_start(pdev, bar) == 0)
return -ENODEV;
@@ -2381,6 +2385,14 @@
type = ADMA;
}
+ if (type == SWNCQ) {
+ if (swncq_enabled)
+ dev_printk(KERN_NOTICE, &pdev->dev,
+ "Using SWNCQ mode\n");
+ else
+ type = GENERIC;
+ }
+
ppi[0] = &nv_port_info[type];
rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
if (rc)
@@ -2422,10 +2434,8 @@
rc = nv_adma_host_init(host);
if (rc)
return rc;
- } else if (type == SWNCQ && swncq_enabled) {
- dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n");
+ } else if (type == SWNCQ)
nv_swncq_host_init(host);
- }
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ppi[0]->irq_handler,
@@ -2440,37 +2450,37 @@
int rc;
rc = ata_pci_device_do_resume(pdev);
- if(rc)
+ if (rc)
return rc;
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
- if(hpriv->type >= CK804) {
+ if (hpriv->type >= CK804) {
u8 regval;
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val);
regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
}
- if(hpriv->type == ADMA) {
+ if (hpriv->type == ADMA) {
u32 tmp32;
struct nv_adma_port_priv *pp;
/* enable/disable ADMA on the ports appropriately */
pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
pp = host->ports[0]->private_data;
- if(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
+ if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN |
- NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
else
tmp32 |= (NV_MCP_SATA_CFG_20_PORT0_EN |
- NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
+ NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
pp = host->ports[1]->private_data;
- if(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
+ if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT1_EN |
- NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
else
tmp32 |= (NV_MCP_SATA_CFG_20_PORT1_EN |
- NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
+ NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
}
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 9032131..7914def 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -2,6 +2,7 @@
* sata_promise.c - Promise SATA
*
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
+ * Mikael Pettersson <mikpe@it.uu.se>
* Please ALWAYS copy linux-ide@vger.kernel.org
* on emails.
*
@@ -45,11 +46,12 @@
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "2.10"
+#define DRV_VERSION "2.11"
enum {
PDC_MAX_PORTS = 4,
PDC_MMIO_BAR = 3,
+ PDC_MAX_PRD = LIBATA_MAX_PRD - 1, /* -1 for ASIC PRD bug workaround */
/* register offsets */
PDC_FEATURE = 0x04, /* Feature/Error reg (per port) */
@@ -83,10 +85,12 @@
PDC_PCI_SYS_ERR = (1 << 22), /* PCI system error */
PDC1_PCI_PARITY_ERR = (1 << 23), /* PCI parity error (from SATA150 driver) */
PDC1_ERR_MASK = PDC1_PCI_PARITY_ERR,
- PDC2_ERR_MASK = PDC2_HTO_ERR | PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR,
- PDC_ERR_MASK = (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC_OVERRUN_ERR
- | PDC_UNDERRUN_ERR | PDC_DRIVE_ERR | PDC_PCI_SYS_ERR
- | PDC1_ERR_MASK | PDC2_ERR_MASK),
+ PDC2_ERR_MASK = PDC2_HTO_ERR | PDC2_ATA_HBA_ERR |
+ PDC2_ATA_DMA_CNT_ERR,
+ PDC_ERR_MASK = PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR |
+ PDC_OVERRUN_ERR | PDC_UNDERRUN_ERR |
+ PDC_DRIVE_ERR | PDC_PCI_SYS_ERR |
+ PDC1_ERR_MASK | PDC2_ERR_MASK,
board_2037x = 0, /* FastTrak S150 TX2plus */
board_2037x_pata = 1, /* FastTrak S150 TX2plus PATA port */
@@ -155,7 +159,7 @@
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
+ .sg_tablesize = PDC_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
@@ -238,7 +242,7 @@
};
static const struct ata_port_info pdc_port_info[] = {
- /* board_2037x */
+ [board_2037x] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
PDC_FLAG_SATA_PATA,
@@ -248,7 +252,7 @@
.port_ops = &pdc_old_sata_ops,
},
- /* board_2037x_pata */
+ [board_2037x_pata] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
@@ -257,7 +261,7 @@
.port_ops = &pdc_pata_ops,
},
- /* board_20319 */
+ [board_20319] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
PDC_FLAG_4_PORTS,
@@ -267,7 +271,7 @@
.port_ops = &pdc_old_sata_ops,
},
- /* board_20619 */
+ [board_20619] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
PDC_FLAG_4_PORTS,
@@ -277,7 +281,7 @@
.port_ops = &pdc_pata_ops,
},
- /* board_2057x */
+ [board_2057x] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA,
@@ -287,7 +291,7 @@
.port_ops = &pdc_sata_ops,
},
- /* board_2057x_pata */
+ [board_2057x_pata] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
PDC_FLAG_GEN_II,
@@ -297,7 +301,7 @@
.port_ops = &pdc_pata_ops,
},
- /* board_40518 */
+ [board_40518] =
{
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS,
@@ -521,6 +525,84 @@
memcpy(buf+31, cdb, cdb_len);
}
+/**
+ * pdc_fill_sg - Fill PCI IDE PRD table
+ * @qc: Metadata associated with taskfile to be transferred
+ *
+ * Fill PCI IDE PRD (scatter-gather) table with segments
+ * associated with the current disk command.
+ * Make sure hardware does not choke on it.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ */
+static void pdc_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scatterlist *sg;
+ unsigned int idx;
+ const u32 SG_COUNT_ASIC_BUG = 41*4;
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ WARN_ON(qc->__sg == NULL);
+ WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
+
+ idx = 0;
+ ata_for_each_sg(sg, qc) {
+ u32 addr, offset;
+ u32 sg_len, len;
+
+ /* determine if physical DMA addr spans 64K boundary.
+ * Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ while (sg_len) {
+ offset = addr & 0xffff;
+ len = sg_len;
+ if ((offset + sg_len) > 0x10000)
+ len = 0x10000 - offset;
+
+ ap->prd[idx].addr = cpu_to_le32(addr);
+ ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
+
+ idx++;
+ sg_len -= len;
+ addr += len;
+ }
+ }
+
+ if (idx) {
+ u32 len = le32_to_cpu(ap->prd[idx - 1].flags_len);
+
+ if (len > SG_COUNT_ASIC_BUG) {
+ u32 addr;
+
+ VPRINTK("Splitting last PRD.\n");
+
+ addr = le32_to_cpu(ap->prd[idx - 1].addr);
+ ap->prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG);
+
+ addr = addr + len - SG_COUNT_ASIC_BUG;
+ len = SG_COUNT_ASIC_BUG;
+ ap->prd[idx].addr = cpu_to_le32(addr);
+ ap->prd[idx].flags_len = cpu_to_le32(len);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
+
+ idx++;
+ }
+
+ ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+ }
+}
+
static void pdc_qc_prep(struct ata_queued_cmd *qc)
{
struct pdc_port_priv *pp = qc->ap->private_data;
@@ -530,7 +612,7 @@
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
- ata_qc_prep(qc);
+ pdc_fill_sg(qc);
/* fall through */
case ATA_PROT_NODATA:
@@ -546,11 +628,11 @@
break;
case ATA_PROT_ATAPI:
- ata_qc_prep(qc);
+ pdc_fill_sg(qc);
break;
case ATA_PROT_ATAPI_DMA:
- ata_qc_prep(qc);
+ pdc_fill_sg(qc);
/*FALLTHROUGH*/
case ATA_PROT_ATAPI_NODATA:
pdc_atapi_pkt(qc);
@@ -695,19 +777,20 @@
readl(mmio + PDC_INT_SEQMASK);
}
-static inline int pdc_is_sataii_tx4(unsigned long flags)
+static int pdc_is_sataii_tx4(unsigned long flags)
{
const unsigned long mask = PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS;
return (flags & mask) == mask;
}
-static inline unsigned int pdc_port_no_to_ata_no(unsigned int port_no, int is_sataii_tx4)
+static unsigned int pdc_port_no_to_ata_no(unsigned int port_no,
+ int is_sataii_tx4)
{
static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 0, 2};
return is_sataii_tx4 ? sataii_tx4_port_remap[port_no] : port_no;
}
-static irqreturn_t pdc_interrupt (int irq, void *dev_instance)
+static irqreturn_t pdc_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
struct ata_port *ap;
@@ -839,15 +922,16 @@
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
- WARN_ON (tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_ATAPI_DMA);
+ WARN_ON(tf->protocol == ATA_PROT_DMA ||
+ tf->protocol == ATA_PROT_ATAPI_DMA);
ata_tf_load(ap, tf);
}
-static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
+static void pdc_exec_command_mmio(struct ata_port *ap,
+ const struct ata_taskfile *tf)
{
- WARN_ON (tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_ATAPI_DMA);
+ WARN_ON(tf->protocol == ATA_PROT_DMA ||
+ tf->protocol == ATA_PROT_ATAPI_DMA);
ata_exec_command(ap, tf);
}
@@ -870,8 +954,11 @@
}
/* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */
if (scsicmd[0] == WRITE_10) {
- unsigned int lba;
- lba = (scsicmd[2] << 24) | (scsicmd[3] << 16) | (scsicmd[4] << 8) | scsicmd[5];
+ unsigned int lba =
+ (scsicmd[2] << 24) |
+ (scsicmd[3] << 16) |
+ (scsicmd[4] << 8) |
+ scsicmd[5];
if (lba >= 0xFFFF4FA2)
pio = 1;
}
@@ -956,7 +1043,8 @@
writel(tmp, mmio + PDC_SLEW_CTL);
}
-static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int pdc_ata_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static int printed_version;
const struct ata_port_info *pi = &pdc_port_info[ent->driver_data];
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index c4c4cd2..6d43ba7 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -113,7 +113,7 @@
static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int qs_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
-static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int qs_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static int qs_port_start(struct ata_port *ap);
static void qs_host_stop(struct ata_host *host);
static void qs_phy_reset(struct ata_port *ap);
@@ -135,7 +135,6 @@
.sg_tablesize = QS_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
- //FIXME .use_clustering = ATA_SHT_USE_CLUSTERING,
.use_clustering = ENABLE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = QS_DMA_BOUNDARY,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index ea3a0ab..4e6e381 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -111,7 +111,7 @@
SIL_QUIRK_UDMA5MAX = (1 << 1),
};
-static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
#ifdef CONFIG_PM
static int sil_pci_device_resume(struct pci_dev *pdev);
#endif
@@ -138,7 +138,7 @@
/* TODO firmware versions should be added - eric */
static const struct sil_drivelist {
- const char * product;
+ const char *product;
unsigned int quirk;
} sil_blacklist [] = {
{ "ST320012AS", SIL_QUIRK_MOD15WRITE },
@@ -279,7 +279,7 @@
MODULE_DEVICE_TABLE(pci, sil_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-static int slow_down = 0;
+static int slow_down;
module_param(slow_down, int, 0444);
MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)");
@@ -332,7 +332,8 @@
return 0;
}
-static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_reg)
+static inline void __iomem *sil_scr_addr(struct ata_port *ap,
+ unsigned int sc_reg)
{
void __iomem *offset = ap->ioaddr.scr_addr;
@@ -643,7 +644,7 @@
}
}
-static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
int board_id = ent->driver_data;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 26ebffc..187dcb0 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -265,11 +265,11 @@
unsigned int err_mask, action;
const char *desc;
} sil24_cerr_db[] = {
- [0] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
+ [0] = { AC_ERR_DEV, 0,
"device error" },
- [PORT_CERR_DEV] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
+ [PORT_CERR_DEV] = { AC_ERR_DEV, 0,
"device error via D2H FIS" },
- [PORT_CERR_SDB] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
+ [PORT_CERR_SDB] = { AC_ERR_DEV, 0,
"device error via SDB FIS" },
[PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
"error in data FIS" },
@@ -674,7 +674,7 @@
/* put the port into known state */
if (sil24_init_port(ap)) {
- reason ="port not ready";
+ reason = "port not ready";
goto err;
}
@@ -756,7 +756,8 @@
writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
tmp = ata_wait_register(port + PORT_CTRL_STAT,
- PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec);
+ PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10,
+ tout_msec);
/* SStatus oscillates between zero and valid status after
* DEV_RST, debounce it.
@@ -1270,7 +1271,7 @@
PORT_CS_PORT_RST, 10, 100);
if (tmp & PORT_CS_PORT_RST)
dev_printk(KERN_ERR, host->dev,
- "failed to clear port RST\n");
+ "failed to clear port RST\n");
}
/* configure port */
@@ -1283,7 +1284,7 @@
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
- static int printed_version = 0;
+ static int printed_version;
struct ata_port_info pi = sil24_port_info[ent->driver_data];
const struct ata_port_info *ppi[] = { &pi, NULL };
void __iomem * const *iomap;
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index f147dc7..a01260a 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -63,17 +63,17 @@
GENCTL_IOMAPPED_SCR = (1 << 26), /* if set, SCRs are in IO space */
};
-static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static int sis_scr_read (struct ata_port *ap, unsigned int sc_reg, u32 *val);
-static int sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+static int sis_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
+static int sis_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
static const struct pci_device_id sis_pci_tbl[] = {
- { PCI_VDEVICE(SI, 0x0180), sis_180 }, /* SiS 964/180 */
- { PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */
- { PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */
- { PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */
- { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/680 */
- { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L/968/680 */
+ { PCI_VDEVICE(SI, 0x0180), sis_180 }, /* SiS 964/180 */
+ { PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */
+ { PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */
+ { PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */
+ { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/680 */
+ { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L/968/680 */
{ } /* terminate list */
};
@@ -149,24 +149,24 @@
if (ap->port_no) {
switch (pdev->device) {
- case 0x0180:
- case 0x0181:
- pci_read_config_byte(pdev, SIS_PMR, &pmr);
- if ((pmr & SIS_PMR_COMBINED) == 0)
- addr += SIS180_SATA1_OFS;
- break;
+ case 0x0180:
+ case 0x0181:
+ pci_read_config_byte(pdev, SIS_PMR, &pmr);
+ if ((pmr & SIS_PMR_COMBINED) == 0)
+ addr += SIS180_SATA1_OFS;
+ break;
- case 0x0182:
- case 0x0183:
- case 0x1182:
- addr += SIS182_SATA1_OFS;
- break;
+ case 0x0182:
+ case 0x0183:
+ case 0x1182:
+ addr += SIS182_SATA1_OFS;
+ break;
}
}
return addr;
}
-static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg, u32 *val)
+static u32 sis_scr_cfg_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
@@ -190,7 +190,7 @@
return 0;
}
-static void sis_scr_cfg_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
+static void sis_scr_cfg_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
@@ -253,7 +253,7 @@
return 0;
}
-static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
struct ata_port_info pi = sis_port_info;
@@ -309,29 +309,33 @@
} else {
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 180/181 chipset in combined mode\n");
- port2_start=0;
+ port2_start = 0;
pi.flags |= ATA_FLAG_SLAVE_POSS;
}
break;
case 0x0182:
case 0x0183:
- pci_read_config_dword ( pdev, 0x6C, &val);
+ pci_read_config_dword(pdev, 0x6C, &val);
if (val & (1L << 31)) {
- dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965 chipset\n");
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Detected SiS 182/965 chipset\n");
pi.flags |= ATA_FLAG_SLAVE_POSS;
} else {
- dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965L chipset\n");
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Detected SiS 182/965L chipset\n");
}
break;
case 0x1182:
- dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/966/680 SATA controller\n");
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Detected SiS 1182/966/680 SATA controller\n");
pi.flags |= ATA_FLAG_SLAVE_POSS;
break;
case 0x1183:
- dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
ppi[0] = &sis_info133_for_sata;
ppi[1] = &sis_info133_for_sata;
break;
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 12d613c..69f651e 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -182,7 +182,7 @@
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
tf->hob_lbah = lbah >> 8;
- }
+ }
}
/**
@@ -193,7 +193,7 @@
* spin_lock_irqsave(host lock)
*/
-static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc)
+static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
@@ -224,7 +224,7 @@
* spin_lock_irqsave(host lock)
*/
-static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc)
+static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
void __iomem *mmio = ap->ioaddr.bmdma_addr;
@@ -255,7 +255,7 @@
static u8 k2_stat_check_status(struct ata_port *ap)
{
- return readl(ap->ioaddr.status_addr);
+ return readl(ap->ioaddr.status_addr);
}
#ifdef CONFIG_PPC_OF
@@ -395,7 +395,7 @@
}
-static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
const struct ata_port_info *ppi[] =
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index b6026bc..4d85718 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -212,9 +212,9 @@
};
-static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int pdc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static void pdc_eng_timeout(struct ata_port *ap);
-static void pdc_20621_phy_reset (struct ata_port *ap);
+static void pdc_20621_phy_reset(struct ata_port *ap);
static int pdc_port_start(struct ata_port *ap);
static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
@@ -320,16 +320,16 @@
return 0;
}
-static void pdc_20621_phy_reset (struct ata_port *ap)
+static void pdc_20621_phy_reset(struct ata_port *ap)
{
VPRINTK("ENTER\n");
- ap->cbl = ATA_CBL_SATA;
- ata_port_probe(ap);
- ata_bus_reset(ap);
+ ap->cbl = ATA_CBL_SATA;
+ ata_port_probe(ap);
+ ata_bus_reset(ap);
}
static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf,
- unsigned int portno,
+ unsigned int portno,
unsigned int total_len)
{
u32 addr;
@@ -351,7 +351,7 @@
}
static inline void pdc20621_host_sg(struct ata_taskfile *tf, u8 *buf,
- unsigned int portno,
+ unsigned int portno,
unsigned int total_len)
{
u32 addr;
@@ -711,8 +711,8 @@
return ata_qc_issue_prot(qc);
}
-static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
- struct ata_queued_cmd *qc,
+static inline unsigned int pdc20621_host_intr(struct ata_port *ap,
+ struct ata_queued_cmd *qc,
unsigned int doing_hdma,
void __iomem *mmio)
{
@@ -803,7 +803,7 @@
readl(mmio + PDC_20621_SEQMASK);
}
-static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance)
+static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
struct ata_port *ap;
@@ -836,9 +836,9 @@
return IRQ_NONE;
}
- spin_lock(&host->lock);
+ spin_lock(&host->lock);
- for (i = 1; i < 9; i++) {
+ for (i = 1; i < 9; i++) {
port_no = i - 1;
if (port_no > 3)
port_no -= 4;
@@ -859,7 +859,7 @@
}
}
- spin_unlock(&host->lock);
+ spin_unlock(&host->lock);
VPRINTK("mask == 0x%x\n", mask);
@@ -906,16 +906,16 @@
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
- WARN_ON (tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_NODATA);
+ WARN_ON(tf->protocol == ATA_PROT_DMA ||
+ tf->protocol == ATA_PROT_NODATA);
ata_tf_load(ap, tf);
}
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
- WARN_ON (tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_NODATA);
+ WARN_ON(tf->protocol == ATA_PROT_DMA ||
+ tf->protocol == ATA_PROT_NODATA);
ata_exec_command(ap, tf);
}
@@ -953,7 +953,7 @@
mmio += PDC_CHIP0_OFS;
page_mask = 0x00;
- window_size = 0x2000 * 4; /* 32K byte uchar size */
+ window_size = 0x2000 * 4; /* 32K byte uchar size */
idx = (u16) (offset / window_size);
writel(0x01, mmio + PDC_GENERAL_CTLR);
@@ -979,7 +979,7 @@
window_size / 4);
psource += window_size;
size -= window_size;
- idx ++;
+ idx++;
}
if (size) {
@@ -1008,7 +1008,7 @@
mmio += PDC_CHIP0_OFS;
page_mask = 0x00;
- window_size = 0x2000 * 4; /* 32K byte uchar size */
+ window_size = 0x2000 * 4; /* 32K byte uchar size */
idx = (u16) (offset / window_size);
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
@@ -1031,7 +1031,7 @@
readl(mmio + PDC_GENERAL_CTLR);
psource += window_size;
size -= window_size;
- idx ++;
+ idx++;
}
if (size) {
@@ -1050,7 +1050,7 @@
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
u32 i2creg = 0;
u32 status;
- u32 count =0;
+ u32 count = 0;
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
@@ -1082,21 +1082,21 @@
static int pdc20621_detect_dimm(struct ata_host *host)
{
- u32 data=0 ;
+ u32 data = 0;
if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
PDC_DIMM_SPD_SYSTEM_FREQ, &data)) {
- if (data == 100)
+ if (data == 100)
return 100;
- } else
+ } else
return 0;
if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) {
- if(data <= 0x75)
+ if (data <= 0x75)
return 133;
- } else
+ } else
return 0;
- return 0;
+ return 0;
}
@@ -1104,8 +1104,8 @@
{
u32 spd0[50];
u32 data = 0;
- int size, i;
- u8 bdimmsize;
+ int size, i;
+ u8 bdimmsize;
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
static const struct {
unsigned int reg;
@@ -1128,40 +1128,40 @@
/* hard-code chip #0 */
mmio += PDC_CHIP0_OFS;
- for(i=0; i<ARRAY_SIZE(pdc_i2c_read_data); i++)
+ for (i = 0; i < ARRAY_SIZE(pdc_i2c_read_data); i++)
pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
pdc_i2c_read_data[i].reg,
&spd0[pdc_i2c_read_data[i].ofs]);
- data |= (spd0[4] - 8) | ((spd0[21] != 0) << 3) | ((spd0[3]-11) << 4);
- data |= ((spd0[17] / 4) << 6) | ((spd0[5] / 2) << 7) |
+ data |= (spd0[4] - 8) | ((spd0[21] != 0) << 3) | ((spd0[3]-11) << 4);
+ data |= ((spd0[17] / 4) << 6) | ((spd0[5] / 2) << 7) |
((((spd0[27] + 9) / 10) - 1) << 8) ;
- data |= (((((spd0[29] > spd0[28])
+ data |= (((((spd0[29] > spd0[28])
? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10;
- data |= ((spd0[30] - spd0[29] + 9) / 10 - 2) << 12;
+ data |= ((spd0[30] - spd0[29] + 9) / 10 - 2) << 12;
- if (spd0[18] & 0x08)
+ if (spd0[18] & 0x08)
data |= ((0x03) << 14);
- else if (spd0[18] & 0x04)
+ else if (spd0[18] & 0x04)
data |= ((0x02) << 14);
- else if (spd0[18] & 0x01)
+ else if (spd0[18] & 0x01)
data |= ((0x01) << 14);
- else
+ else
data |= (0 << 14);
- /*
+ /*
Calculate the size of bDIMMSize (power of 2) and
merge the DIMM size by program start/end address.
*/
- bdimmsize = spd0[4] + (spd0[5] / 2) + spd0[3] + (spd0[17] / 2) + 3;
- size = (1 << bdimmsize) >> 20; /* size = xxx(MB) */
- data |= (((size / 16) - 1) << 16);
- data |= (0 << 23);
+ bdimmsize = spd0[4] + (spd0[5] / 2) + spd0[3] + (spd0[17] / 2) + 3;
+ size = (1 << bdimmsize) >> 20; /* size = xxx(MB) */
+ data |= (((size / 16) - 1) << 16);
+ data |= (0 << 23);
data |= 8;
- writel(data, mmio + PDC_DIMM0_CONTROL);
+ writel(data, mmio + PDC_DIMM0_CONTROL);
readl(mmio + PDC_DIMM0_CONTROL);
- return size;
+ return size;
}
@@ -1172,9 +1172,9 @@
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
/* hard-code chip #0 */
- mmio += PDC_CHIP0_OFS;
+ mmio += PDC_CHIP0_OFS;
- /*
+ /*
Set To Default : DIMM Module Global Control Register (0x022259F1)
DIMM Arbitration Disable (bit 20)
DIMM Data/Control Output Driving Selection (bit12 - bit15)
@@ -1193,40 +1193,40 @@
writel(data, mmio + PDC_SDRAM_CONTROL);
readl(mmio + PDC_SDRAM_CONTROL);
printk(KERN_ERR "Local DIMM ECC Enabled\n");
- }
+ }
- /* DIMM Initialization Select/Enable (bit 18/19) */
- data &= (~(1<<18));
- data |= (1<<19);
- writel(data, mmio + PDC_SDRAM_CONTROL);
+ /* DIMM Initialization Select/Enable (bit 18/19) */
+ data &= (~(1<<18));
+ data |= (1<<19);
+ writel(data, mmio + PDC_SDRAM_CONTROL);
- error = 1;
- for (i = 1; i <= 10; i++) { /* polling ~5 secs */
+ error = 1;
+ for (i = 1; i <= 10; i++) { /* polling ~5 secs */
data = readl(mmio + PDC_SDRAM_CONTROL);
if (!(data & (1<<19))) {
- error = 0;
- break;
+ error = 0;
+ break;
}
msleep(i*100);
- }
- return error;
+ }
+ return error;
}
static unsigned int pdc20621_dimm_init(struct ata_host *host)
{
int speed, size, length;
- u32 addr,spd0,pci_status;
- u32 tmp=0;
- u32 time_period=0;
- u32 tcount=0;
- u32 ticks=0;
- u32 clock=0;
- u32 fparam=0;
+ u32 addr, spd0, pci_status;
+ u32 tmp = 0;
+ u32 time_period = 0;
+ u32 tcount = 0;
+ u32 ticks = 0;
+ u32 clock = 0;
+ u32 fparam = 0;
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
/* hard-code chip #0 */
- mmio += PDC_CHIP0_OFS;
+ mmio += PDC_CHIP0_OFS;
/* Initialize PLL based upon PCI Bus Frequency */
@@ -1254,7 +1254,7 @@
If SX4 is on PCI-X bus, after 3 seconds, the timer counter
register should be >= (0xffffffff - 3x10^8).
*/
- if(tcount >= PCI_X_TCOUNT) {
+ if (tcount >= PCI_X_TCOUNT) {
ticks = (time_period - tcount);
VPRINTK("Num counters 0x%x (%d)\n", ticks, ticks);
@@ -1285,41 +1285,43 @@
if (!(speed = pdc20621_detect_dimm(host))) {
printk(KERN_ERR "Detect Local DIMM Fail\n");
return 1; /* DIMM error */
- }
- VPRINTK("Local DIMM Speed = %d\n", speed);
+ }
+ VPRINTK("Local DIMM Speed = %d\n", speed);
- /* Programming DIMM0 Module Control Register (index_CID0:80h) */
+ /* Programming DIMM0 Module Control Register (index_CID0:80h) */
size = pdc20621_prog_dimm0(host);
- VPRINTK("Local DIMM Size = %dMB\n",size);
+ VPRINTK("Local DIMM Size = %dMB\n", size);
- /* Programming DIMM Module Global Control Register (index_CID0:88h) */
+ /* Programming DIMM Module Global Control Register (index_CID0:88h) */
if (pdc20621_prog_dimm_global(host)) {
printk(KERN_ERR "Programming DIMM Module Global Control Register Fail\n");
return 1;
- }
+ }
#ifdef ATA_VERBOSE_DEBUG
{
- u8 test_parttern1[40] = {0x55,0xAA,'P','r','o','m','i','s','e',' ',
- 'N','o','t',' ','Y','e','t',' ','D','e','f','i','n','e','d',' ',
- '1','.','1','0',
- '9','8','0','3','1','6','1','2',0,0};
+ u8 test_parttern1[40] =
+ {0x55,0xAA,'P','r','o','m','i','s','e',' ',
+ 'N','o','t',' ','Y','e','t',' ',
+ 'D','e','f','i','n','e','d',' ',
+ '1','.','1','0',
+ '9','8','0','3','1','6','1','2',0,0};
u8 test_parttern2[40] = {0};
- pdc20621_put_to_dimm(host, (void *) test_parttern2, 0x10040, 40);
- pdc20621_put_to_dimm(host, (void *) test_parttern2, 0x40, 40);
+ pdc20621_put_to_dimm(host, test_parttern2, 0x10040, 40);
+ pdc20621_put_to_dimm(host, test_parttern2, 0x40, 40);
- pdc20621_put_to_dimm(host, (void *) test_parttern1, 0x10040, 40);
- pdc20621_get_from_dimm(host, (void *) test_parttern2, 0x40, 40);
+ pdc20621_put_to_dimm(host, test_parttern1, 0x10040, 40);
+ pdc20621_get_from_dimm(host, test_parttern2, 0x40, 40);
printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
test_parttern2[1], &(test_parttern2[2]));
- pdc20621_get_from_dimm(host, (void *) test_parttern2, 0x10040,
+ pdc20621_get_from_dimm(host, test_parttern2, 0x10040,
40);
printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
test_parttern2[1], &(test_parttern2[2]));
- pdc20621_put_to_dimm(host, (void *) test_parttern1, 0x40, 40);
- pdc20621_get_from_dimm(host, (void *) test_parttern2, 0x40, 40);
+ pdc20621_put_to_dimm(host, test_parttern1, 0x40, 40);
+ pdc20621_get_from_dimm(host, test_parttern2, 0x40, 40);
printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
test_parttern2[1], &(test_parttern2[2]));
}
@@ -1375,7 +1377,8 @@
readl(mmio + PDC_HDMA_CTLSTAT); /* flush */
}
-static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int pdc_sata_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static int printed_version;
const struct ata_port_info *ppi[] =
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index d394da0..e710e71 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -56,9 +56,9 @@
unsigned int scr_cfg_addr[uli_max_ports];
};
-static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static int uli_scr_read (struct ata_port *ap, unsigned int sc_reg, u32 *val);
-static int uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+static int uli_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
+static int uli_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
static const struct pci_device_id uli_pci_tbl[] = {
{ PCI_VDEVICE(AL, 0x5289), uli_5289 },
@@ -143,7 +143,7 @@
return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg);
}
-static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
+static u32 uli_scr_cfg_read(struct ata_port *ap, unsigned int sc_reg)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
@@ -153,7 +153,7 @@
return val;
}
-static void uli_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
+static void uli_scr_cfg_write(struct ata_port *ap, unsigned int scr, u32 val)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int cfg_addr = get_scr_cfg_addr(ap, scr);
@@ -161,7 +161,7 @@
pci_write_config_dword(pdev, cfg_addr, val);
}
-static int uli_scr_read (struct ata_port *ap, unsigned int sc_reg, u32 *val)
+static int uli_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
{
if (sc_reg > SCR_CONTROL)
return -EINVAL;
@@ -170,16 +170,16 @@
return 0;
}
-static int uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
+static int uli_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
{
- if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0
+ if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0
return -EINVAL;
uli_scr_cfg_write(ap, sc_reg, val);
return 0;
}
-static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
const struct ata_port_info *ppi[] = { &uli_port_info, NULL };
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index cc6ee08..3ef072ff 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -3,7 +3,7 @@
*
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
* Please ALWAYS copy linux-ide@vger.kernel.org
- on emails.
+ * on emails.
*
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
* Copyright 2003-2004 Jeff Garzik
@@ -69,7 +69,7 @@
SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */
};
-static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static int svia_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int svia_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
static void svia_noop_freeze(struct ata_port *ap);
@@ -372,12 +372,12 @@
16, 16, 16, 16, 32, 128
};
-static void __iomem * svia_scr_addr(void __iomem *addr, unsigned int port)
+static void __iomem *svia_scr_addr(void __iomem *addr, unsigned int port)
{
return addr + (port * 128);
}
-static void __iomem * vt6421_scr_addr(void __iomem *addr, unsigned int port)
+static void __iomem *vt6421_scr_addr(void __iomem *addr, unsigned int port)
{
return addr + (port * 64);
}
@@ -472,7 +472,7 @@
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
dev_printk(KERN_DEBUG, &pdev->dev,
"enabling SATA channels (0x%x)\n",
- (int) tmp8);
+ (int) tmp8);
tmp8 |= ALL_PORTS;
pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
}
@@ -482,7 +482,7 @@
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
dev_printk(KERN_DEBUG, &pdev->dev,
"enabling SATA channel interrupts (0x%x)\n",
- (int) tmp8);
+ (int) tmp8);
tmp8 |= ALL_PORTS;
pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
}
@@ -492,13 +492,13 @@
if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
dev_printk(KERN_DEBUG, &pdev->dev,
"enabling SATA channel native mode (0x%x)\n",
- (int) tmp8);
+ (int) tmp8);
tmp8 |= NATIVE_MODE_ALL;
pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
}
}
-static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
unsigned int i;
@@ -525,8 +525,8 @@
dev_printk(KERN_ERR, &pdev->dev,
"invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n",
i,
- (unsigned long long)pci_resource_start(pdev, i),
- (unsigned long long)pci_resource_len(pdev, i));
+ (unsigned long long)pci_resource_start(pdev, i),
+ (unsigned long long)pci_resource_len(pdev, i));
return -ENODEV;
}
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 0d9be16..95ae3ed 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -162,7 +162,8 @@
/*
* The only thing the ctl register is used for is SRST.
* That is not enabled or disabled via tf_load.
- * However, if ATA_NIEN is changed, then we need to change the interrupt register.
+ * However, if ATA_NIEN is changed, then we need to change
+ * the interrupt register.
*/
if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
ap->last_ctl = tf->ctl;
@@ -219,7 +220,7 @@
tf->hob_lbal = lbal >> 8;
tf->hob_lbam = lbam >> 8;
tf->hob_lbah = lbah >> 8;
- }
+ }
}
static inline void vsc_error_intr(u8 port_status, struct ata_port *ap)
@@ -256,9 +257,10 @@
/*
* vsc_sata_interrupt
*
- * Read the interrupt register and process for the devices that have them pending.
+ * Read the interrupt register and process for the devices that have
+ * them pending.
*/
-static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance)
+static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
unsigned int i;
@@ -287,7 +289,7 @@
handled++;
} else
dev_printk(KERN_ERR, host->dev,
- ": interrupt from disabled port %d\n", i);
+ "interrupt from disabled port %d\n", i);
}
}
@@ -363,7 +365,8 @@
}
-static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+static int __devinit vsc_sata_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
static const struct ata_port_info pi = {
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
diff --git a/drivers/base/core.c b/drivers/base/core.c
index c134341..3f4d6aa1 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1228,18 +1228,18 @@
sysfs_remove_link(&dev->parent->kobj, old_class_name);
}
}
-#endif
-
+#else
if (dev->class) {
sysfs_remove_link(&dev->class->subsys.kobj, old_device_name);
error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj,
dev->bus_id);
if (error) {
- /* Uh... how to unravel this if restoring can fail? */
dev_err(dev, "%s: sysfs_create_symlink failed (%d)\n",
__FUNCTION__, error);
}
}
+#endif
+
out:
put_device(dev);
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 5a6fe17..7d70496 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1,20 +1,20 @@
/*
- * Disk Array driver for HP SA 5xxx and 6xxx Controllers
- * Copyright 2000, 2006 Hewlett-Packard Development Company, L.P.
+ * Disk Array driver for HP Smart Array controllers.
+ * (C) Copyright 2000, 2007 Hewlett-Packard Development Company, L.P.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more details.
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA.
*
* Questions/Comments/Bugfixes to iss_storagedev@hp.com
*
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 4aca7dd..63ee6c0 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -1,20 +1,20 @@
/*
- * Disk Array driver for Compaq SA53xx Controllers, SCSI Tape module
- * Copyright 2001 Compaq Computer Corporation
+ * Disk Array driver for HP Smart Array controllers, SCSI Tape module.
+ * (C) Copyright 2001, 2007 Hewlett-Packard Development Company, L.P.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more details.
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Foundation, Inc., 59 Temple Place, Suite 300, Boston, MA
+ * 02111-1307, USA.
*
* Questions/Comments/Bugfixes to iss_storagedev@hp.com
*
diff --git a/drivers/block/cciss_scsi.h b/drivers/block/cciss_scsi.h
index 5e7e06c..d9c2c58 100644
--- a/drivers/block/cciss_scsi.h
+++ b/drivers/block/cciss_scsi.h
@@ -1,20 +1,20 @@
/*
- * Disk Array driver for Compaq SA53xx Controllers, SCSI Tape module
- * Copyright 2001 Compaq Computer Corporation
+ * Disk Array driver for HP Smart Array controllers, SCSI Tape module.
+ * (C) Copyright 2001, 2007 Hewlett-Packard Development Company, L.P.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more details.
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Foundation, Inc., 59 Temple Place, Suite 300, Boston, MA
+ * 02111-1307, USA.
*
* Questions/Comments/Bugfixes to iss_storagedev@hp.com
*
diff --git a/drivers/block/cryptoloop.c b/drivers/block/cryptoloop.c
index 1b58b01..24116787 100644
--- a/drivers/block/cryptoloop.c
+++ b/drivers/block/cryptoloop.c
@@ -150,13 +150,8 @@
u32 iv[4] = { 0, };
iv[0] = cpu_to_le32(IV & 0xffffffff);
- sg_set_page(&sg_in, in_page);
- sg_in.offset = in_offs;
- sg_in.length = sz;
-
- sg_set_page(&sg_out, out_page);
- sg_out.offset = out_offs;
- sg_out.length = sz;
+ sg_set_page(&sg_in, in_page, sz, in_offs);
+ sg_set_page(&sg_out, out_page, sz, out_offs);
desc.info = iv;
err = encdecfunc(&desc, &sg_out, &sg_in, sz);
diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c
index 7276f7d..fac4c6c 100644
--- a/drivers/block/sunvdc.c
+++ b/drivers/block/sunvdc.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/list.h>
+#include <linux/scatterlist.h>
#include <asm/vio.h>
#include <asm/ldc.h>
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 14143f2..08e909d 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1428,9 +1428,9 @@
scmd->state = UB_CMDST_INIT;
scmd->nsg = 1;
sg = &scmd->sgv[0];
- sg_set_page(sg, virt_to_page(sc->top_sense));
- sg->offset = (unsigned long)sc->top_sense & (PAGE_SIZE-1);
- sg->length = UB_SENSE_SIZE;
+ sg_init_table(sg, UB_MAX_REQ_SG);
+ sg_set_page(sg, virt_to_page(sc->top_sense), UB_SENSE_SIZE,
+ (unsigned long)sc->top_sense & (PAGE_SIZE-1));
scmd->len = UB_SENSE_SIZE;
scmd->lun = cmd->lun;
scmd->done = ub_top_sense_done;
@@ -1864,9 +1864,8 @@
cmd->state = UB_CMDST_INIT;
cmd->nsg = 1;
sg = &cmd->sgv[0];
- sg_set_page(sg, virt_to_page(p));
- sg->offset = (unsigned long)p & (PAGE_SIZE-1);
- sg->length = 8;
+ sg_init_table(sg, UB_MAX_REQ_SG);
+ sg_set_page(sg, virt_to_page(p), 8, (unsigned long)p & (PAGE_SIZE-1));
cmd->len = 8;
cmd->lun = lun;
cmd->done = ub_probe_done;
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index a901eee..3cf7129 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -4,7 +4,9 @@
#include <linux/hdreg.h>
#include <linux/virtio.h>
#include <linux/virtio_blk.h>
-#include <linux/virtio_blk.h>
+#include <linux/scatterlist.h>
+
+#define VIRTIO_MAX_SG (3+MAX_PHYS_SEGMENTS)
static unsigned char virtblk_index = 'a';
struct virtio_blk
@@ -23,7 +25,7 @@
mempool_t *pool;
/* Scatterlist: can be too big for stack. */
- struct scatterlist sg[3+MAX_PHYS_SEGMENTS];
+ struct scatterlist sg[VIRTIO_MAX_SG];
};
struct virtblk_req
@@ -94,8 +96,8 @@
if (blk_barrier_rq(vbr->req))
vbr->out_hdr.type |= VIRTIO_BLK_T_BARRIER;
- /* We have to zero this, otherwise blk_rq_map_sg gets upset. */
- memset(vblk->sg, 0, sizeof(vblk->sg));
+ /* This init could be done at vblk creation time */
+ sg_init_table(vblk->sg, VIRTIO_MAX_SG);
sg_set_buf(&vblk->sg[0], &vbr->out_hdr, sizeof(vbr->out_hdr));
num = blk_rq_map_sg(q, vbr->req, vblk->sg+1);
sg_set_buf(&vblk->sg[num+1], &vbr->in_hdr, sizeof(vbr->in_hdr));
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 880b5dc..d8bb44b 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -41,9 +41,9 @@
#include <linux/completion.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/scatterlist.h>
#include <asm/vio.h>
-#include <asm/scatterlist.h>
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/vio.h>
@@ -258,6 +258,7 @@
cmd = viomajorsubtype_cdio | viocdwrite;
}
+ sg_init_table(&sg, 1);
if (blk_rq_map_sg(req->q, req, &sg) == 0) {
printk(VIOCD_KERN_WARNING
"error setting up scatter/gather list\n");
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index f22c253..ccb1fa8 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -56,9 +56,9 @@
X on AMD Irongate, 761, and 762 chipsets.
config AGP_AMD64
- tristate "AMD Opteron/Athlon64 on-CPU GART support" if !IOMMU
+ tristate "AMD Opteron/Athlon64 on-CPU GART support" if !GART_IOMMU
depends on AGP && X86
- default y if IOMMU
+ default y if GART_IOMMU
help
This option gives you AGP support for the GLX component of
X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index d95662e..d8200ac 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -787,7 +787,7 @@
/* On AMD64 the PCI driver needs to initialize this driver early
for the IOMMU, so it has to be called via a backdoor. */
-#ifndef CONFIG_IOMMU
+#ifndef CONFIG_GART_IOMMU
module_init(agp_amd64_init);
module_exit(agp_amd64_cleanup);
#endif
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 0e937f6..20070b7 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -41,7 +41,7 @@
*/
static inline int uncached_access(struct file *file, unsigned long addr)
{
-#if defined(__i386__)
+#if defined(__i386__) && !defined(__arch_um__)
/*
* On the PPro and successors, the MTRRs are used to set
* memory types for physical addresses outside main memory,
@@ -57,7 +57,7 @@
test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) ||
test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability) )
&& addr >= __pa(high_memory);
-#elif defined(__x86_64__)
+#elif defined(__x86_64__) && !defined(__arch_um__)
/*
* This is broken because it can generate memory type aliases,
* which can cause cache corruptions
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index 0e328d3..6883fcb 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -218,7 +218,7 @@
skb->len < nlh->nlmsg_len ||
nlh->nlmsg_len > CONNECTOR_MAX_MSG_SIZE) {
kfree_skb(skb);
- goto out;
+ return;
}
len = NLMSG_ALIGN(nlh->nlmsg_len);
@@ -229,9 +229,6 @@
if (err < 0)
kfree_skb(skb);
}
-
-out:
- kfree_skb(__skb);
}
/*
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index fdf4106..d2fabe7 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -19,7 +19,6 @@
#include "cpuidle.h"
DEFINE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
-EXPORT_PER_CPU_SYMBOL_GPL(cpuidle_devices);
DEFINE_MUTEX(cpuidle_lock);
LIST_HEAD(cpuidle_detected_devices);
diff --git a/drivers/cpuidle/governor.c b/drivers/cpuidle/governor.c
index bb699cb2..70b5964 100644
--- a/drivers/cpuidle/governor.c
+++ b/drivers/cpuidle/governor.c
@@ -94,8 +94,6 @@
return ret;
}
-EXPORT_SYMBOL_GPL(cpuidle_register_governor);
-
/**
* cpuidle_replace_governor - find a replacement governor
* @exclude_rating: the rating that will be skipped while looking for
@@ -138,4 +136,3 @@
mutex_unlock(&cpuidle_lock);
}
-EXPORT_SYMBOL_GPL(cpuidle_unregister_governor);
diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c
index 4e8de16..c666b4e 100644
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -55,7 +55,7 @@
if (ctx(tfm)->data && ctx(tfm)->used) {
struct scatterlist sg;
- sg_set_buf(&sg, ctx(tfm)->data, ctx(tfm)->used);
+ sg_init_one(&sg, ctx(tfm)->data, ctx(tfm)->used);
crypto_hash_update(&ctx(tfm)->fallback, &sg, sg.length);
}
@@ -79,7 +79,7 @@
if (unlikely(ctx(tfm)->bypass)) {
struct scatterlist sg;
- sg_set_buf(&sg, (uint8_t *)data, length);
+ sg_init_one(&sg, (uint8_t *)data, length);
crypto_hash_update(&ctx(tfm)->fallback, &sg, length);
return;
}
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 9c91b0f..6a7d25f 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -43,7 +43,6 @@
config NET_DMA
bool "Network: TCP receive copy offload"
depends on DMA_ENGINE && NET
- default y
help
This enables the use of DMA engines in the network stack to
offload receive copy-to-user operations, freeing CPU cycles.
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 6758832..c9b9081 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -984,8 +984,10 @@
*/
if (ohci->next_config_rom != NULL) {
- free_rom = ohci->config_rom;
- free_rom_bus = ohci->config_rom_bus;
+ if (ohci->next_config_rom != ohci->config_rom) {
+ free_rom = ohci->config_rom;
+ free_rom_bus = ohci->config_rom_bus;
+ }
ohci->config_rom = ohci->next_config_rom;
ohci->config_rom_bus = ohci->next_config_rom_bus;
ohci->next_config_rom = NULL;
@@ -1161,19 +1163,30 @@
* the right values in the bus reset tasklet.
*/
- ohci->next_config_rom =
- dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE,
- &ohci->next_config_rom_bus, GFP_KERNEL);
- if (ohci->next_config_rom == NULL)
- return -ENOMEM;
+ if (config_rom) {
+ ohci->next_config_rom =
+ dma_alloc_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ &ohci->next_config_rom_bus,
+ GFP_KERNEL);
+ if (ohci->next_config_rom == NULL)
+ return -ENOMEM;
- memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE);
- fw_memcpy_to_be32(ohci->next_config_rom, config_rom, length * 4);
+ memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE);
+ fw_memcpy_to_be32(ohci->next_config_rom, config_rom, length * 4);
+ } else {
+ /*
+ * In the suspend case, config_rom is NULL, which
+ * means that we just reuse the old config rom.
+ */
+ ohci->next_config_rom = ohci->config_rom;
+ ohci->next_config_rom_bus = ohci->config_rom_bus;
+ }
- ohci->next_header = config_rom[0];
+ ohci->next_header = be32_to_cpu(ohci->next_config_rom[0]);
ohci->next_config_rom[0] = 0;
reg_write(ohci, OHCI1394_ConfigROMhdr, 0);
- reg_write(ohci, OHCI1394_BusOptions, config_rom[2]);
+ reg_write(ohci, OHCI1394_BusOptions,
+ be32_to_cpu(ohci->next_config_rom[2]));
reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus);
reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
@@ -1984,7 +1997,7 @@
return err;
}
- return ohci_enable(&ohci->card, ohci->config_rom, CONFIG_ROM_SIZE);
+ return ohci_enable(&ohci->card, NULL, 0);
}
#endif
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index dd332f2..0b27da7 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -297,7 +297,7 @@
static int hidinput_getkeycode(struct input_dev *dev, int scancode,
int *keycode)
{
- struct hid_device *hid = dev->private;
+ struct hid_device *hid = input_get_drvdata(dev);
struct hid_usage *usage;
usage = hidinput_find_key(hid, scancode, 0);
@@ -311,7 +311,7 @@
static int hidinput_setkeycode(struct input_dev *dev, int scancode,
int keycode)
{
- struct hid_device *hid = dev->private;
+ struct hid_device *hid = input_get_drvdata(dev);
struct hid_usage *usage;
int old_keycode;
@@ -1152,7 +1152,7 @@
kfree(hidinput);
input_free_device(input_dev);
err_hid("Out of memory during hid input probe");
- return -1;
+ goto out_unwind;
}
input_set_drvdata(input_dev, hid);
@@ -1186,15 +1186,25 @@
* UGCI) cram a lot of unrelated inputs into the
* same interface. */
hidinput->report = report;
- input_register_device(hidinput->input);
+ if (input_register_device(hidinput->input))
+ goto out_cleanup;
hidinput = NULL;
}
}
- if (hidinput)
- input_register_device(hidinput->input);
+ if (hidinput && input_register_device(hidinput->input))
+ goto out_cleanup;
return 0;
+
+out_cleanup:
+ input_free_device(hidinput->input);
+ kfree(hidinput);
+out_unwind:
+ /* unwind the ones we already registered */
+ hidinput_disconnect(hid);
+
+ return -1;
}
EXPORT_SYMBOL_GPL(hidinput_connect);
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 41a59a8..a255285 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -129,6 +129,11 @@
#define USB_DEVICE_ID_0_8_8_IF_KIT 0x0053
#define USB_DEVICE_ID_PHIDGET_MOTORCONTROL 0x0058
+#define USB_VENDOR_ID_GOTOP 0x08f2
+#define USB_DEVICE_ID_SUPER_Q2 0x007f
+#define USB_DEVICE_ID_GOGOPEN 0x00ce
+#define USB_DEVICE_ID_PENPOWER 0x00f4
+
#define USB_VENDOR_ID_GRIFFIN 0x077d
#define USB_DEVICE_ID_POWERMATE 0x0410
#define USB_DEVICE_ID_SOUNDKNOB 0x04AA
@@ -415,6 +420,9 @@
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_7_IF_KIT, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_8_IF_KIT, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_PHIDGET_MOTORCONTROL, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_SUPER_Q2, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_GOGOPEN, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_PENPOWER, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_90, HID_QUIRK_IGNORE },
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 9837adc..5fc4019 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -743,7 +743,7 @@
static long hiddev_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct inode *inode = file->f_path.dentry->d_inode;
- return hiddev_ioctl(inode, file, cmd, compat_ptr(arg));
+ return hiddev_ioctl(inode, file, cmd, (unsigned long)compat_ptr(arg));
}
#endif
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 410a0d1..93f71fc 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -316,13 +316,13 @@
drive->waiting_for_dma = 0;
- disable_dma(state->dev->dma);
+ disable_dma(ECARD_DEV(state->dev)->dma);
/* Teardown mappings after DMA has completed. */
dma_unmap_sg(state->dev, hwif->sg_table, hwif->sg_nents,
hwif->sg_dma_direction);
- return get_dma_residue(state->dev->dma) != 0;
+ return get_dma_residue(ECARD_DEV(state->dev)->dma) != 0;
}
static void icside_dma_start(ide_drive_t *drive)
@@ -331,8 +331,8 @@
struct icside_state *state = hwif->hwif_data;
/* We can not enable DMA on both channels simultaneously. */
- BUG_ON(dma_channel_active(state->dev->dma));
- enable_dma(state->dev->dma);
+ BUG_ON(dma_channel_active(ECARD_DEV(state->dev)->dma));
+ enable_dma(ECARD_DEV(state->dev)->dma);
}
static int icside_dma_setup(ide_drive_t *drive)
@@ -350,7 +350,7 @@
/*
* We can not enable DMA on both channels.
*/
- BUG_ON(dma_channel_active(state->dev->dma));
+ BUG_ON(dma_channel_active(ECARD_DEV(state->dev)->dma));
icside_build_sglist(drive, rq);
@@ -367,14 +367,14 @@
/*
* Select the correct timing for this drive.
*/
- set_dma_speed(state->dev->dma, drive->drive_data);
+ set_dma_speed(ECARD_DEV(state->dev)->dma, drive->drive_data);
/*
* Tell the DMA engine about the SG table and
* data direction.
*/
- set_dma_sg(state->dev->dma, hwif->sg_table, hwif->sg_nents);
- set_dma_mode(state->dev->dma, dma_mode);
+ set_dma_sg(ECARD_DEV(state->dev)->dma, hwif->sg_table, hwif->sg_nents);
+ set_dma_mode(ECARD_DEV(state->dev)->dma, dma_mode);
drive->waiting_for_dma = 1;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 9516883..dcda0f1 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -582,9 +582,12 @@
/*
* Early UDMA66 devices don't set bit14 to 1, only bit13 is valid.
* We list them here and depend on the device side cable detection for them.
+ *
+ * Some optical devices with the buggy firmwares have the same problem.
*/
static const struct drive_list_entry ivb_list[] = {
{ "QUANTUM FIREBALLlct10 05" , "A03.0900" },
+ { "TSSTcorp CDDVDW SH-S202J" , "SB00" },
{ NULL , NULL }
};
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 3ef4fc1..1cd4e9c 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/cy82c693.c Version 0.41 Aug 27, 2007
+ * linux/drivers/ide/pci/cy82c693.c Version 0.42 Oct 23, 2007
*
* Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
@@ -436,10 +436,10 @@
hwif->ide_dma_on = &cy82c693_ide_dma_on;
}
-static __devinitdata ide_hwif_t *primary;
-
static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
{
+ static ide_hwif_t *primary;
+
if (PCI_FUNC(hwif->pci_dev->devfn) == 1)
primary = hwif;
else {
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index f44d708..0688569 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -49,7 +49,7 @@
printk(KERN_INFO "IDE generic will claim all unknown PCI IDE storage controllers.\n");
return 1;
}
-__setup("all-generic-ide", ide_generic_all_on);
+const __setup("all-generic-ide", ide_generic_all_on);
#endif
module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 612b795..5682895 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/hpt366.c Version 1.20 Oct 1, 2007
+ * linux/drivers/ide/pci/hpt366.c Version 1.21 Oct 23, 2007
*
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
@@ -433,7 +433,7 @@
sixty_six_base_hpt37x
};
-static struct hpt_info hpt36x __devinitdata = {
+static const struct hpt_info hpt36x __devinitdata = {
.chip_name = "HPT36x",
.chip_type = HPT36x,
.udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2,
@@ -441,7 +441,7 @@
.settings = hpt36x_settings
};
-static struct hpt_info hpt370 __devinitdata = {
+static const struct hpt_info hpt370 __devinitdata = {
.chip_name = "HPT370",
.chip_type = HPT370,
.udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
@@ -449,7 +449,7 @@
.settings = hpt37x_settings
};
-static struct hpt_info hpt370a __devinitdata = {
+static const struct hpt_info hpt370a __devinitdata = {
.chip_name = "HPT370A",
.chip_type = HPT370A,
.udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
@@ -457,7 +457,7 @@
.settings = hpt37x_settings
};
-static struct hpt_info hpt374 __devinitdata = {
+static const struct hpt_info hpt374 __devinitdata = {
.chip_name = "HPT374",
.chip_type = HPT374,
.udma_mask = ATA_UDMA5,
@@ -465,7 +465,7 @@
.settings = hpt37x_settings
};
-static struct hpt_info hpt372 __devinitdata = {
+static const struct hpt_info hpt372 __devinitdata = {
.chip_name = "HPT372",
.chip_type = HPT372,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
@@ -473,7 +473,7 @@
.settings = hpt37x_settings
};
-static struct hpt_info hpt372a __devinitdata = {
+static const struct hpt_info hpt372a __devinitdata = {
.chip_name = "HPT372A",
.chip_type = HPT372A,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
@@ -481,7 +481,7 @@
.settings = hpt37x_settings
};
-static struct hpt_info hpt302 __devinitdata = {
+static const struct hpt_info hpt302 __devinitdata = {
.chip_name = "HPT302",
.chip_type = HPT302,
.udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
@@ -489,7 +489,7 @@
.settings = hpt37x_settings
};
-static struct hpt_info hpt371 __devinitdata = {
+static const struct hpt_info hpt371 __devinitdata = {
.chip_name = "HPT371",
.chip_type = HPT371,
.udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
@@ -497,7 +497,7 @@
.settings = hpt37x_settings
};
-static struct hpt_info hpt372n __devinitdata = {
+static const struct hpt_info hpt372n __devinitdata = {
.chip_name = "HPT372N",
.chip_type = HPT372N,
.udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
@@ -505,7 +505,7 @@
.settings = hpt37x_settings
};
-static struct hpt_info hpt302n __devinitdata = {
+static const struct hpt_info hpt302n __devinitdata = {
.chip_name = "HPT302N",
.chip_type = HPT302N,
.udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
@@ -513,7 +513,7 @@
.settings = hpt37x_settings
};
-static struct hpt_info hpt371n __devinitdata = {
+static const struct hpt_info hpt371n __devinitdata = {
.chip_name = "HPT371N",
.chip_type = HPT371N,
.udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
@@ -1508,7 +1508,7 @@
*/
static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- struct hpt_info *info = NULL;
+ const struct hpt_info *info = NULL;
struct pci_dev *dev2 = NULL;
struct ide_port_info d;
u8 idx = id->driver_data;
@@ -1522,7 +1522,7 @@
if (rev < 3)
info = &hpt36x;
else {
- static struct hpt_info *hpt37x_info[] =
+ static const struct hpt_info *hpt37x_info[] =
{ &hpt370, &hpt370a, &hpt372, &hpt372n };
info = hpt37x_info[min_t(u8, rev, 6) - 3];
@@ -1552,7 +1552,7 @@
d.name = info->chip_name;
d.udma_mask = info->udma_mask;
- pci_set_drvdata(dev, info);
+ pci_set_drvdata(dev, (void *)info);
if (info == &hpt36x || info == &hpt374)
dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
@@ -1560,7 +1560,7 @@
if (dev2) {
int ret;
- pci_set_drvdata(dev2, info);
+ pci_set_drvdata(dev2, (void *)info);
if (info == &hpt374)
hpt374_init(dev, dev2);
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index d2c8b55..0a7b320 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -324,17 +324,18 @@
pci_disable_device(dev);
pci_set_power_state(dev, pci_choose_state(dev, state));
- dev->current_state = state.event;
return 0;
}
static int sc1200_resume (struct pci_dev *dev)
{
ide_hwif_t *hwif = NULL;
+ int i;
- pci_set_power_state(dev, PCI_D0); // bring chip back from sleep state
- dev->current_state = PM_EVENT_ON;
- pci_enable_device(dev);
+ i = pci_enable_device(dev);
+ if (i)
+ return i;
+
//
// loop over all interfaces that are part of this pci device:
//
diff --git a/drivers/ieee1394/dma.c b/drivers/ieee1394/dma.c
index 3051e31..f5f4983 100644
--- a/drivers/ieee1394/dma.c
+++ b/drivers/ieee1394/dma.c
@@ -111,8 +111,8 @@
unsigned long va =
(unsigned long)dma->kvirt + (i << PAGE_SHIFT);
- sg_set_page(&dma->sglist[i], vmalloc_to_page((void *)va));
- dma->sglist[i].length = PAGE_SIZE;
+ sg_set_page(&dma->sglist[i], vmalloc_to_page((void *)va),
+ PAGE_SIZE, 0);
}
/* map sglist to the IOMMU */
diff --git a/drivers/ieee1394/ieee1394_transactions.c b/drivers/ieee1394/ieee1394_transactions.c
index c39c70a..6779893 100644
--- a/drivers/ieee1394/ieee1394_transactions.c
+++ b/drivers/ieee1394/ieee1394_transactions.c
@@ -235,7 +235,6 @@
packet->node_id);
return -EAGAIN;
}
- BUG();
case ACK_BUSY_X:
case ACK_BUSY_A:
@@ -282,7 +281,6 @@
packet->ack_code, packet->node_id, packet->tcode);
return -EAGAIN;
}
- BUG();
}
struct hpsb_packet *hpsb_make_readpacket(struct hpsb_host *host, nodeid_t node,
diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c
index d7f6452..e8d5f6b 100644
--- a/drivers/infiniband/core/fmr_pool.c
+++ b/drivers/infiniband/core/fmr_pool.c
@@ -291,10 +291,10 @@
atomic_set(&pool->flush_ser, 0);
init_waitqueue_head(&pool->force_wait);
- pool->thread = kthread_create(ib_fmr_cleanup_thread,
- pool,
- "ib_fmr(%s)",
- device->name);
+ pool->thread = kthread_run(ib_fmr_cleanup_thread,
+ pool,
+ "ib_fmr(%s)",
+ device->name);
if (IS_ERR(pool->thread)) {
printk(KERN_WARNING PFX "couldn't start cleanup thread\n");
ret = PTR_ERR(pool->thread);
diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index 14159ff..4e3128f 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -171,9 +171,7 @@
if (vma_list &&
!is_vm_hugetlb_page(vma_list[i + off]))
umem->hugetlb = 0;
- sg_set_page(&chunk->page_list[i], page_list[i + off]);
- chunk->page_list[i].offset = 0;
- chunk->page_list[i].length = PAGE_SIZE;
+ sg_set_page(&chunk->page_list[i], page_list[i + off], PAGE_SIZE, 0);
}
chunk->nmap = ib_dma_map_sg(context->device,
diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c
index bcfa3cc..e7c25db 100644
--- a/drivers/infiniband/hw/ipath/ipath_eeprom.c
+++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c
@@ -538,7 +538,15 @@
u8 *ip = (u8 *) ifp;
u8 csum = 0, len;
- for (len = 0; len < ifp->if_length; len++)
+ /*
+ * Limit length checksummed to max length of actual data.
+ * Checksum of erased eeprom will still be bad, but we avoid
+ * reading past the end of the buffer we were passed.
+ */
+ len = ifp->if_length;
+ if (len > sizeof(struct ipath_flash))
+ len = sizeof(struct ipath_flash);
+ while (len--)
csum += *ip++;
csum -= ifp->if_csum;
csum = ~csum;
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 6a5dd5c..c61f9da 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -453,7 +453,7 @@
}
static void handle_supp_msgs(struct ipath_devdata *dd,
- unsigned supp_msgs, char msg[512])
+ unsigned supp_msgs, char *msg, int msgsz)
{
/*
* Print the message unless it's ibc status change only, which
@@ -461,9 +461,9 @@
*/
if (dd->ipath_lasterror & ~INFINIPATH_E_IBSTATUSCHANGED) {
int iserr;
- iserr = ipath_decode_err(msg, sizeof msg,
- dd->ipath_lasterror &
- ~INFINIPATH_E_IBSTATUSCHANGED);
+ iserr = ipath_decode_err(msg, msgsz,
+ dd->ipath_lasterror &
+ ~INFINIPATH_E_IBSTATUSCHANGED);
if (dd->ipath_lasterror &
~(INFINIPATH_E_RRCVEGRFULL |
INFINIPATH_E_RRCVHDRFULL | INFINIPATH_E_PKTERRS))
@@ -492,8 +492,8 @@
}
static unsigned handle_frequent_errors(struct ipath_devdata *dd,
- ipath_err_t errs, char msg[512],
- int *noprint)
+ ipath_err_t errs, char *msg,
+ int msgsz, int *noprint)
{
unsigned long nc;
static unsigned long nextmsg_time;
@@ -512,7 +512,7 @@
nextmsg_time = nc + HZ * 3;
}
else if (supp_msgs) {
- handle_supp_msgs(dd, supp_msgs, msg);
+ handle_supp_msgs(dd, supp_msgs, msg, msgsz);
supp_msgs = 0;
nmsgs = 0;
}
@@ -525,14 +525,14 @@
static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
{
- char msg[512];
+ char msg[128];
u64 ignore_this_time = 0;
int i, iserr = 0;
int chkerrpkts = 0, noprint = 0;
unsigned supp_msgs;
int log_idx;
- supp_msgs = handle_frequent_errors(dd, errs, msg, &noprint);
+ supp_msgs = handle_frequent_errors(dd, errs, msg, sizeof msg, &noprint);
/* don't report errors that are masked */
errs &= ~dd->ipath_maskederrs;
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index 4b6b7ee..54c61a9 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -630,11 +630,8 @@
void ipath_send_complete(struct ipath_qp *qp, struct ipath_swqe *wqe,
enum ib_wc_status status)
{
- u32 last = qp->s_last;
-
- if (++last == qp->s_size)
- last = 0;
- qp->s_last = last;
+ unsigned long flags;
+ u32 last;
/* See ch. 11.2.4.1 and 10.7.3.1 */
if (!(qp->s_flags & IPATH_S_SIGNAL_REQ_WR) ||
@@ -658,4 +655,11 @@
wc.port_num = 0;
ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 0);
}
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+ last = qp->s_last;
+ if (++last >= qp->s_size)
+ last = 0;
+ qp->s_last = last;
+ spin_unlock_irqrestore(&qp->s_lock, flags);
}
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 6b33224..8cba9c5 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1282,7 +1282,7 @@
int size;
int i;
- spin_lock_irqsave(&qp->rq.lock, flags);
+ spin_lock_irqsave(&qp->sq.lock, flags);
ind = qp->sq.head;
@@ -1448,7 +1448,7 @@
(qp->sq.wqe_cnt - 1));
}
- spin_unlock_irqrestore(&qp->rq.lock, flags);
+ spin_unlock_irqrestore(&qp->sq.lock, flags);
return err;
}
diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c
index 007b381..1f4d27d 100644
--- a/drivers/infiniband/hw/mthca/mthca_memfree.c
+++ b/drivers/infiniband/hw/mthca/mthca_memfree.c
@@ -113,9 +113,7 @@
if (!page)
return -ENOMEM;
- sg_set_page(mem, page);
- mem->length = PAGE_SIZE << order;
- mem->offset = 0;
+ sg_set_page(mem, page, PAGE_SIZE << order, 0);
return 0;
}
@@ -481,9 +479,8 @@
if (ret < 0)
goto out;
- sg_set_page(&db_tab->page[i].mem, pages[0]);
- db_tab->page[i].mem.length = MTHCA_ICM_PAGE_SIZE;
- db_tab->page[i].mem.offset = uaddr & ~PAGE_MASK;
+ sg_set_page(&db_tab->page[i].mem, pages[0], MTHCA_ICM_PAGE_SIZE,
+ uaddr & ~PAGE_MASK);
ret = pci_map_sg(dev->pdev, &db_tab->page[i].mem, 1, PCI_DMA_TODEVICE);
if (ret < 0) {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 8761077..059cf92 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -60,7 +60,7 @@
.qp_state = IB_QPS_ERR
};
-#define IPOIB_CM_RX_DRAIN_WRID 0x7fffffff
+#define IPOIB_CM_RX_DRAIN_WRID 0xffffffff
static struct ib_send_wr ipoib_cm_rx_drain_wr = {
.wr_id = IPOIB_CM_RX_DRAIN_WRID,
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 6dd3758..6e9d75b 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -120,6 +120,7 @@
{ 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+ { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
@@ -129,6 +130,7 @@
{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+ { 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index 4941a9e..43aaa5c 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -24,7 +24,7 @@
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pcspkr");
-#ifdef CONFIG_X86
+#if defined(CONFIG_MIPS) || defined(CONFIG_X86)
/* Use the global PIT lock ! */
#include <asm/i8253.h>
#else
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index f132702..b4423a4 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -129,12 +129,12 @@
*/
#define ATP_THRESHOLD 5
-/* MacBook Pro (Geyser 3 & 4) initialization constants */
-#define ATP_GEYSER3_MODE_READ_REQUEST_ID 1
-#define ATP_GEYSER3_MODE_WRITE_REQUEST_ID 9
-#define ATP_GEYSER3_MODE_REQUEST_VALUE 0x300
-#define ATP_GEYSER3_MODE_REQUEST_INDEX 0
-#define ATP_GEYSER3_MODE_VENDOR_VALUE 0x04
+/* Geyser initialization constants */
+#define ATP_GEYSER_MODE_READ_REQUEST_ID 1
+#define ATP_GEYSER_MODE_WRITE_REQUEST_ID 9
+#define ATP_GEYSER_MODE_REQUEST_VALUE 0x300
+#define ATP_GEYSER_MODE_REQUEST_INDEX 0
+#define ATP_GEYSER_MODE_VENDOR_VALUE 0x04
/* Structure to hold all of our device specific stuff */
struct atp {
@@ -142,9 +142,11 @@
struct usb_device * udev; /* usb device */
struct urb * urb; /* usb request block */
signed char * data; /* transferred data */
- int open; /* non-zero if opened */
- struct input_dev *input; /* input dev */
- int valid; /* are the sensors valid ? */
+ struct input_dev * input; /* input dev */
+ unsigned char open; /* non-zero if opened */
+ unsigned char valid; /* are the sensors valid ? */
+ unsigned char size_detect_done;
+ unsigned char overflowwarn; /* overflow warning printed? */
int x_old; /* last reported x/y, */
int y_old; /* used for smoothing */
/* current value of the sensors */
@@ -153,7 +155,6 @@
signed char xy_old[ATP_XSENSORS + ATP_YSENSORS];
/* accumulated sensors */
int xy_acc[ATP_XSENSORS + ATP_YSENSORS];
- int overflowwarn; /* overflow warning printed? */
int datalen; /* size of an USB urb transfer */
int idlecount; /* number of empty packets */
struct work_struct work;
@@ -170,7 +171,7 @@
#define dprintk(format, a...) \
do { \
- if (debug) printk(format, ##a); \
+ if (debug) printk(KERN_DEBUG format, ##a); \
} while (0)
MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold, Michael Hanselmann");
@@ -188,6 +189,15 @@
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Activate debugging output");
+static inline int atp_is_fountain(struct atp *dev)
+{
+ u16 productId = le16_to_cpu(dev->udev->descriptor.idProduct);
+
+ return productId == FOUNTAIN_ANSI_PRODUCT_ID ||
+ productId == FOUNTAIN_ISO_PRODUCT_ID ||
+ productId == FOUNTAIN_TP_ONLY_PRODUCT_ID;
+}
+
/* Checks if the device a Geyser 2 (ANSI, ISO, JIS) */
static inline int atp_is_geyser_2(struct atp *dev)
{
@@ -211,52 +221,63 @@
}
/*
- * By default Geyser 3 device sends standard USB HID mouse
+ * By default newer Geyser devices send standard USB HID mouse
* packets (Report ID 2). This code changes device mode, so it
* sends raw sensor reports (Report ID 5).
*/
-static int atp_geyser3_init(struct usb_device *udev)
+static int atp_geyser_init(struct usb_device *udev)
{
char data[8];
int size;
size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
- ATP_GEYSER3_MODE_READ_REQUEST_ID,
+ ATP_GEYSER_MODE_READ_REQUEST_ID,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- ATP_GEYSER3_MODE_REQUEST_VALUE,
- ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000);
+ ATP_GEYSER_MODE_REQUEST_VALUE,
+ ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
if (size != 8) {
err("Could not do mode read request from device"
- " (Geyser 3 mode)");
+ " (Geyser Raw mode)");
return -EIO;
}
/* Apply the mode switch */
- data[0] = ATP_GEYSER3_MODE_VENDOR_VALUE;
+ data[0] = ATP_GEYSER_MODE_VENDOR_VALUE;
size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- ATP_GEYSER3_MODE_WRITE_REQUEST_ID,
+ ATP_GEYSER_MODE_WRITE_REQUEST_ID,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- ATP_GEYSER3_MODE_REQUEST_VALUE,
- ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000);
+ ATP_GEYSER_MODE_REQUEST_VALUE,
+ ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
if (size != 8) {
err("Could not do mode write request to device"
- " (Geyser 3 mode)");
+ " (Geyser Raw mode)");
return -EIO;
}
return 0;
}
-/* Reinitialise the device if it's a geyser 3 */
+/*
+ * Reinitialise the device. This usually stops stream of empty packets
+ * coming from it.
+ */
static void atp_reinit(struct work_struct *work)
{
struct atp *dev = container_of(work, struct atp, work);
struct usb_device *udev = dev->udev;
+ int retval;
dev->idlecount = 0;
- atp_geyser3_init(udev);
+
+ atp_geyser_init(udev);
+
+ retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
+ if (retval) {
+ err("%s - usb_submit_urb failed with result %d",
+ __FUNCTION__, retval);
+ }
}
static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
@@ -337,7 +358,7 @@
break;
case -EOVERFLOW:
if(!dev->overflowwarn) {
- printk("appletouch: OVERFLOW with data "
+ printk(KERN_WARNING "appletouch: OVERFLOW with data "
"length %d, actual length is %d\n",
dev->datalen, dev->urb->actual_length);
dev->overflowwarn = 1;
@@ -426,15 +447,17 @@
dev->x_old = dev->y_old = -1;
memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
- if (atp_is_geyser_3(dev)) /* No 17" Macbooks (yet) */
+ if (dev->size_detect_done ||
+ atp_is_geyser_3(dev)) /* No 17" Macbooks (yet) */
goto exit;
/* 17" Powerbooks have extra X sensors */
- for (i = (atp_is_geyser_2(dev)?15:16); i < ATP_XSENSORS; i++) {
- if (!dev->xy_cur[i]) continue;
+ for (i = (atp_is_geyser_2(dev) ? 15 : 16); i < ATP_XSENSORS; i++) {
+ if (!dev->xy_cur[i])
+ continue;
- printk("appletouch: 17\" model detected.\n");
- if(atp_is_geyser_2(dev))
+ printk(KERN_INFO "appletouch: 17\" model detected.\n");
+ if (atp_is_geyser_2(dev))
input_set_abs_params(dev->input, ABS_X, 0,
(20 - 1) *
ATP_XFACT - 1,
@@ -444,10 +467,10 @@
(ATP_XSENSORS - 1) *
ATP_XFACT - 1,
ATP_FUZZ, 0);
-
break;
}
+ dev->size_detect_done = 1;
goto exit;
}
@@ -479,7 +502,7 @@
dev->y_old = y;
if (debug > 1)
- printk("appletouch: X: %3d Y: %3d "
+ printk(KERN_DEBUG "appletouch: X: %3d Y: %3d "
"Xz: %3d Yz: %3d\n",
x, y, x_z, y_z);
@@ -507,19 +530,25 @@
input_report_key(dev->input, BTN_LEFT, key);
input_sync(dev->input);
- /* Many Geysers will continue to send packets continually after
- the first touch unless reinitialised. Do so if it's been
- idle for a while in order to avoid waking the kernel up
- several hundred times a second */
-
- if (!x && !y && !key) {
- dev->idlecount++;
- if (dev->idlecount == 10) {
- dev->valid = 0;
- schedule_work(&dev->work);
- }
- } else
- dev->idlecount = 0;
+ /*
+ * Many Geysers will continue to send packets continually after
+ * the first touch unless reinitialised. Do so if it's been
+ * idle for a while in order to avoid waking the kernel up
+ * several hundred times a second. Re-initialization does not
+ * work on Fountain touchpads.
+ */
+ if (!atp_is_fountain(dev)) {
+ if (!x && !y && !key) {
+ dev->idlecount++;
+ if (dev->idlecount == 10) {
+ dev->valid = 0;
+ schedule_work(&dev->work);
+ /* Don't resubmit urb here, wait for reinit */
+ return;
+ }
+ } else
+ dev->idlecount = 0;
+ }
exit:
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
@@ -593,12 +622,12 @@
else
dev->datalen = 81;
- if (atp_is_geyser_3(dev)) {
+ if (!atp_is_fountain(dev)) {
/* switch to raw sensor mode */
- if (atp_geyser3_init(udev))
+ if (atp_geyser_init(udev))
goto err_free_devs;
- printk("appletouch Geyser 3 inited.\n");
+ printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
}
dev->urb = usb_alloc_urb(0, GFP_KERNEL);
diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c
index 655a392..26ec095 100644
--- a/drivers/input/mouse/inport.c
+++ b/drivers/input/mouse/inport.c
@@ -144,7 +144,7 @@
b = inb(INPORT_SIGNATURE_PORT);
c = inb(INPORT_SIGNATURE_PORT);
if (a == b || a != c) {
- printk(KERN_ERR "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
+ printk(KERN_INFO "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
err = -ENODEV;
goto err_release_region;
}
diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c
index b23a4f3..37e7c75 100644
--- a/drivers/input/mouse/logibm.c
+++ b/drivers/input/mouse/logibm.c
@@ -134,7 +134,7 @@
udelay(100);
if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) {
- printk(KERN_ERR "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE);
+ printk(KERN_INFO "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE);
err = -ENODEV;
goto err_release_region;
}
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 6af19980..02b3ad8c 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -944,11 +944,7 @@
#endif /* __hppa__ */
-#if !defined(__mc68000__) /* Link error on m68k! */
-static void __exit hp_sdc_exit(void)
-#else
static void hp_sdc_exit(void)
-#endif
{
write_lock_irq(&hp_sdc.lock);
diff --git a/drivers/isdn/capi/capidrv.c b/drivers/isdn/capi/capidrv.c
index 476012b..48c1775 100644
--- a/drivers/isdn/capi/capidrv.c
+++ b/drivers/isdn/capi/capidrv.c
@@ -1843,6 +1843,7 @@
int msglen;
u16 errcode;
u16 datahandle;
+ u32 data;
if (!card) {
printk(KERN_ERR "capidrv: if_sendbuf called with invalid driverId %d!\n",
@@ -1860,9 +1861,26 @@
return 0;
}
datahandle = nccip->datahandle;
+
+ /*
+ * Here we copy pointer skb->data into the 32-bit 'Data' field.
+ * The 'Data' field is not used in practice in linux kernel
+ * (neither in 32 or 64 bit), but should have some value,
+ * since a CAPI message trace will display it.
+ *
+ * The correct value in the 32 bit case is the address of the
+ * data, in 64 bit it makes no sense, we use 0 there.
+ */
+
+#ifdef CONFIG_64BIT
+ data = 0;
+#else
+ data = (unsigned long) skb->data;
+#endif
+
capi_fill_DATA_B3_REQ(&sendcmsg, global.ap.applid, card->msgid++,
nccip->ncci, /* adr */
- (u32) skb->data, /* Data */
+ data, /* Data */
skb->len, /* DataLength */
datahandle, /* DataHandle */
0 /* Flags */
@@ -2123,7 +2141,10 @@
printk(KERN_ERR "capidrv: delcontr: no contr %u\n", contr);
return -1;
}
- #warning FIXME: maybe a race condition the card should be removed here from global list /kkeil
+
+ /* FIXME: maybe a race condition the card should be removed
+ * here from global list /kkeil
+ */
spin_unlock_irqrestore(&global_lock, flags);
del_timer(&card->listentimer);
diff --git a/drivers/isdn/sc/shmem.c b/drivers/isdn/sc/shmem.c
index 034d41a..e0331e0 100644
--- a/drivers/isdn/sc/shmem.c
+++ b/drivers/isdn/sc/shmem.c
@@ -28,15 +28,15 @@
{
unsigned long flags;
unsigned char ch;
+ unsigned long dest_rem = ((unsigned long) dest) % 0x4000;
- if(!IS_VALID_CARD(card)) {
+ if (!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return;
}
- if(n > SRAM_PAGESIZE) {
+ if (n > SRAM_PAGESIZE)
return;
- }
/*
* determine the page to load from the address
@@ -50,8 +50,7 @@
outb(((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80,
sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
- memcpy_toio(sc_adapter[card]->rambase +
- ((unsigned long) dest % 0x4000), src, n);
+ memcpy_toio(sc_adapter[card]->rambase + dest_rem, src, n);
spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
pr_debug("%s: set page to %#x\n",sc_adapter[card]->devicename,
((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE)>>14)|0x80);
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index 35d19ae..cb4c670 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -128,9 +128,12 @@
__free_pages(switcher_page[i], 0);
}
-/*L:305
+/*H:032
* Dealing With Guest Memory.
*
+ * Before we go too much further into the Host, we need to grok the routines
+ * we use to deal with Guest memory.
+ *
* When the Guest gives us (what it thinks is) a physical address, we can use
* the normal copy_from_user() & copy_to_user() on the corresponding place in
* the memory region allocated by the Launcher.
diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
index 9d5184c..b478aff 100644
--- a/drivers/lguest/hypercalls.c
+++ b/drivers/lguest/hypercalls.c
@@ -90,6 +90,7 @@
lg->pending_notify = args->arg1;
break;
default:
+ /* It should be an architecture-specific hypercall. */
if (lguest_arch_do_hcall(lg, args))
kill_guest(lg, "Bad hypercall %li\n", args->arg0);
}
@@ -157,7 +158,6 @@
* Guest makes a hypercall, we end up here to set things up: */
static void initialize(struct lguest *lg)
{
-
/* You can't do anything until you're initialized. The Guest knows the
* rules, so we're unforgiving here. */
if (lg->hcall->arg0 != LHCALL_LGUEST_INIT) {
@@ -174,7 +174,8 @@
|| get_user(lg->noirq_end, &lg->lguest_data->noirq_end))
kill_guest(lg, "bad guest page %p", lg->lguest_data);
- /* We write the current time into the Guest's data page once now. */
+ /* We write the current time into the Guest's data page once so it can
+ * set its clock. */
write_timestamp(lg);
/* page_tables.c will also do some setup. */
@@ -182,8 +183,8 @@
/* This is the one case where the above accesses might have been the
* first write to a Guest page. This may have caused a copy-on-write
- * fault, but the Guest might be referring to the old (read-only)
- * page. */
+ * fault, but the old page might be (read-only) in the Guest
+ * pagetable. */
guest_pagetable_clear_all(lg);
}
@@ -220,7 +221,7 @@
* Normally it doesn't matter: the Guest will run again and
* update the trap number before we come back here.
*
- * However, if we are signalled or the Guest sends DMA to the
+ * However, if we are signalled or the Guest sends I/O to the
* Launcher, the run_guest() loop will exit without running the
* Guest. When it comes back it would try to re-run the
* hypercall. */
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 8296698..2b66f79 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -92,8 +92,8 @@
/* Remember that we never let the Guest actually disable interrupts, so
* the "Interrupt Flag" bit is always set. We copy that bit from the
- * Guest's "irq_enabled" field into the eflags word: the Guest copies
- * it back in "lguest_iret". */
+ * Guest's "irq_enabled" field into the eflags word: we saw the Guest
+ * copy it back in "lguest_iret". */
eflags = lg->regs->eflags;
if (get_user(irq_enable, &lg->lguest_data->irq_enabled) == 0
&& !(irq_enable & X86_EFLAGS_IF))
@@ -124,7 +124,7 @@
kill_guest(lg, "Disabling interrupts");
}
-/*H:200
+/*H:205
* Virtual Interrupts.
*
* maybe_do_interrupt() gets called before every entry to the Guest, to see if
@@ -256,19 +256,21 @@
* bogus one in): if we fail here, the Guest will be killed. */
if (!idt_present(lg->arch.idt[num].a, lg->arch.idt[num].b))
return 0;
- set_guest_interrupt(lg, lg->arch.idt[num].a, lg->arch.idt[num].b, has_err(num));
+ set_guest_interrupt(lg, lg->arch.idt[num].a, lg->arch.idt[num].b,
+ has_err(num));
return 1;
}
/*H:250 Here's the hard part: returning to the Host every time a trap happens
* and then calling deliver_trap() and re-entering the Guest is slow.
- * Particularly because Guest userspace system calls are traps (trap 128).
+ * Particularly because Guest userspace system calls are traps (usually trap
+ * 128).
*
* So we'd like to set up the IDT to tell the CPU to deliver traps directly
* into the Guest. This is possible, but the complexities cause the size of
* this file to double! However, 150 lines of code is worth writing for taking
* system calls down from 1750ns to 270ns. Plus, if lguest didn't do it, all
- * the other hypervisors would tease it.
+ * the other hypervisors would beat it up at lunchtime.
*
* This routine indicates if a particular trap number could be delivered
* directly. */
@@ -331,7 +333,7 @@
* change stacks on each context switch. */
void guest_set_stack(struct lguest *lg, u32 seg, u32 esp, unsigned int pages)
{
- /* You are not allowd have a stack segment with privilege level 0: bad
+ /* You are not allowed have a stack segment with privilege level 0: bad
* Guest! */
if ((seg & 0x3) != GUEST_PL)
kill_guest(lg, "bad stack segment %i", seg);
@@ -350,7 +352,7 @@
* part of the Host: page table handling. */
/*H:235 This is the routine which actually checks the Guest's IDT entry and
- * transfers it into our entry in "struct lguest": */
+ * transfers it into the entry in "struct lguest": */
static void set_trap(struct lguest *lg, struct desc_struct *trap,
unsigned int num, u32 lo, u32 hi)
{
@@ -456,6 +458,18 @@
}
}
+/*H:200
+ * The Guest Clock.
+ *
+ * There are two sources of virtual interrupts. We saw one in lguest_user.c:
+ * the Launcher sending interrupts for virtual devices. The other is the Guest
+ * timer interrupt.
+ *
+ * The Guest uses the LHCALL_SET_CLOCKEVENT hypercall to tell us how long to
+ * the next timer interrupt (in nanoseconds). We use the high-resolution timer
+ * infrastructure to set a callback at that time.
+ *
+ * 0 means "turn off the clock". */
void guest_set_clockevent(struct lguest *lg, unsigned long delta)
{
ktime_t expires;
@@ -466,20 +480,27 @@
return;
}
+ /* We use wallclock time here, so the Guest might not be running for
+ * all the time between now and the timer interrupt it asked for. This
+ * is almost always the right thing to do. */
expires = ktime_add_ns(ktime_get_real(), delta);
hrtimer_start(&lg->hrt, expires, HRTIMER_MODE_ABS);
}
+/* This is the function called when the Guest's timer expires. */
static enum hrtimer_restart clockdev_fn(struct hrtimer *timer)
{
struct lguest *lg = container_of(timer, struct lguest, hrt);
+ /* Remember the first interrupt is the timer interrupt. */
set_bit(0, lg->irqs_pending);
+ /* If the Guest is actually stopped, we need to wake it up. */
if (lg->halted)
wake_up_process(lg->tsk);
return HRTIMER_NORESTART;
}
+/* This sets up the timer for this Guest. */
void init_clockdev(struct lguest *lg)
{
hrtimer_init(&lg->hrt, CLOCK_REALTIME, HRTIMER_MODE_ABS);
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index d9144be..8692489 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -74,9 +74,6 @@
u32 pgdidx;
struct pgdir pgdirs[4];
- /* Cached wakeup: we hold a reference to this task. */
- struct task_struct *wake;
-
unsigned long noirq_start, noirq_end;
unsigned long pending_notify; /* pfn from LHCALL_NOTIFY */
@@ -103,7 +100,7 @@
void __lgread(struct lguest *, void *, unsigned long, unsigned);
void __lgwrite(struct lguest *, unsigned long, const void *, unsigned);
-/*L:306 Using memory-copy operations like that is usually inconvient, so we
+/*H:035 Using memory-copy operations like that is usually inconvient, so we
* have the following helper macros which read and write a specific type (often
* an unsigned long).
*
@@ -191,7 +188,7 @@
* Let's step aside for the moment, to study one important routine that's used
* widely in the Host code.
*
- * There are many cases where the Guest does something invalid, like pass crap
+ * There are many cases where the Guest can do something invalid, like pass crap
* to a hypercall. Since only the Guest kernel can make hypercalls, it's quite
* acceptable to simply terminate the Guest and give the Launcher a nicely
* formatted reason. It's also simpler for the Guest itself, which doesn't
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 71c6483..8904f72 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -53,7 +53,8 @@
* Device configurations
*
* The configuration information for a device consists of a series of fields.
- * The device will look for these fields during setup.
+ * We don't really care what they are: the Launcher set them up, and the driver
+ * will look at them during setup.
*
* For us these fields come immediately after that device's descriptor in the
* lguest_devices page.
@@ -122,8 +123,8 @@
* The other piece of infrastructure virtio needs is a "virtqueue": a way of
* the Guest device registering buffers for the other side to read from or
* write into (ie. send and receive buffers). Each device can have multiple
- * virtqueues: for example the console has one queue for sending and one for
- * receiving.
+ * virtqueues: for example the console driver uses one queue for sending and
+ * another for receiving.
*
* Fortunately for us, a very fast shared-memory-plus-descriptors virtqueue
* already exists in virtio_ring.c. We just need to connect it up.
@@ -158,7 +159,7 @@
*
* This is kind of an ugly duckling. It'd be nicer to have a standard
* representation of a virtqueue in the configuration space, but it seems that
- * everyone wants to do it differently. The KVM guys want the Guest to
+ * everyone wants to do it differently. The KVM coders want the Guest to
* allocate its own pages and tell the Host where they are, but for lguest it's
* simpler for the Host to simply tell us where the pages are.
*
@@ -284,6 +285,8 @@
{
struct lguest_device *ldev;
+ /* Start with zeroed memory; Linux's device layer seems to count on
+ * it. */
ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
if (!ldev) {
printk(KERN_EMERG "Cannot allocate lguest dev %u\n",
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index ee405b38..9d716fa 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -8,20 +8,22 @@
#include <linux/fs.h>
#include "lg.h"
-/*L:315 To force the Guest to stop running and return to the Launcher, the
- * Waker sets writes LHREQ_BREAK and the value "1" to /dev/lguest. The
- * Launcher then writes LHREQ_BREAK and "0" to release the Waker. */
+/*L:055 When something happens, the Waker process needs a way to stop the
+ * kernel running the Guest and return to the Launcher. So the Waker writes
+ * LHREQ_BREAK and the value "1" to /dev/lguest to do this. Once the Launcher
+ * has done whatever needs attention, it writes LHREQ_BREAK and "0" to release
+ * the Waker. */
static int break_guest_out(struct lguest *lg, const unsigned long __user *input)
{
unsigned long on;
- /* Fetch whether they're turning break on or off.. */
+ /* Fetch whether they're turning break on or off. */
if (get_user(on, input) != 0)
return -EFAULT;
if (on) {
lg->break_out = 1;
- /* Pop it out (may be running on different CPU) */
+ /* Pop it out of the Guest (may be running on different CPU) */
wake_up_process(lg->tsk);
/* Wait for them to reset it */
return wait_event_interruptible(lg->break_wq, !lg->break_out);
@@ -58,7 +60,7 @@
if (!lg)
return -EINVAL;
- /* If you're not the task which owns the guest, go away. */
+ /* If you're not the task which owns the Guest, go away. */
if (current != lg->tsk)
return -EPERM;
@@ -92,8 +94,8 @@
* base: The start of the Guest-physical memory inside the Launcher memory.
*
* pfnlimit: The highest (Guest-physical) page number the Guest should be
- * allowed to access. The Launcher has to live in Guest memory, so it sets
- * this to ensure the Guest can't reach it.
+ * allowed to access. The Guest memory lives inside the Launcher, so it sets
+ * this to ensure the Guest can only reach its own memory.
*
* pgdir: The (Guest-physical) address of the top of the initial Guest
* pagetables (which are set up by the Launcher).
@@ -189,7 +191,7 @@
}
/*L:010 The first operation the Launcher does must be a write. All writes
- * start with a 32 bit number: for the first write this must be
+ * start with an unsigned long number: for the first write this must be
* LHREQ_INITIALIZE to set up the Guest. After that the Launcher can use
* writes of other values to send interrupts. */
static ssize_t write(struct file *file, const char __user *in,
@@ -275,8 +277,7 @@
* The Launcher is the Host userspace program which sets up, runs and services
* the Guest. In fact, many comments in the Drivers which refer to "the Host"
* doing things are inaccurate: the Launcher does all the device handling for
- * the Guest. The Guest can't tell what's done by the the Launcher and what by
- * the Host.
+ * the Guest, but the Guest can't know that.
*
* Just to confuse you: to the Host kernel, the Launcher *is* the Guest and we
* shall see more of that later.
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index 2a45f06..fffabb3 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -26,7 +26,8 @@
*
* We use two-level page tables for the Guest. If you're not entirely
* comfortable with virtual addresses, physical addresses and page tables then
- * I recommend you review lguest.c's "Page Table Handling" (with diagrams!).
+ * I recommend you review arch/x86/lguest/boot.c's "Page Table Handling" (with
+ * diagrams!).
*
* The Guest keeps page tables, but we maintain the actual ones here: these are
* called "shadow" page tables. Which is a very Guest-centric name: these are
@@ -36,11 +37,11 @@
*
* Anyway, this is the most complicated part of the Host code. There are seven
* parts to this:
- * (i) Setting up a page table entry for the Guest when it faults,
- * (ii) Setting up the page table entry for the Guest stack,
- * (iii) Setting up a page table entry when the Guest tells us it has changed,
+ * (i) Looking up a page table entry when the Guest faults,
+ * (ii) Making sure the Guest stack is mapped,
+ * (iii) Setting up a page table entry when the Guest tells us one has changed,
* (iv) Switching page tables,
- * (v) Flushing (thowing away) page tables,
+ * (v) Flushing (throwing away) page tables,
* (vi) Mapping the Switcher when the Guest is about to run,
* (vii) Setting up the page tables initially.
:*/
@@ -57,16 +58,15 @@
static DEFINE_PER_CPU(pte_t *, switcher_pte_pages);
#define switcher_pte_page(cpu) per_cpu(switcher_pte_pages, cpu)
-/*H:320 With our shadow and Guest types established, we need to deal with
- * them: the page table code is curly enough to need helper functions to keep
- * it clear and clean.
+/*H:320 The page table code is curly enough to need helper functions to keep it
+ * clear and clean.
*
* There are two functions which return pointers to the shadow (aka "real")
* page tables.
*
* spgd_addr() takes the virtual address and returns a pointer to the top-level
- * page directory entry for that address. Since we keep track of several page
- * tables, the "i" argument tells us which one we're interested in (it's
+ * page directory entry (PGD) for that address. Since we keep track of several
+ * page tables, the "i" argument tells us which one we're interested in (it's
* usually the current one). */
static pgd_t *spgd_addr(struct lguest *lg, u32 i, unsigned long vaddr)
{
@@ -81,9 +81,9 @@
return &lg->pgdirs[i].pgdir[index];
}
-/* This routine then takes the PGD entry given above, which contains the
- * address of the PTE page. It then returns a pointer to the PTE entry for the
- * given address. */
+/* This routine then takes the page directory entry returned above, which
+ * contains the address of the page table entry (PTE) page. It then returns a
+ * pointer to the PTE entry for the given address. */
static pte_t *spte_addr(struct lguest *lg, pgd_t spgd, unsigned long vaddr)
{
pte_t *page = __va(pgd_pfn(spgd) << PAGE_SHIFT);
@@ -191,7 +191,7 @@
}
/*H:330
- * (i) Setting up a page table entry for the Guest when it faults
+ * (i) Looking up a page table entry when the Guest faults.
*
* We saw this call in run_guest(): when we see a page fault in the Guest, we
* come here. That's because we only set up the shadow page tables lazily as
@@ -199,7 +199,7 @@
* and return to the Guest without it knowing.
*
* If we fixed up the fault (ie. we mapped the address), this routine returns
- * true. */
+ * true. Otherwise, it was a real fault and we need to tell the Guest. */
int demand_page(struct lguest *lg, unsigned long vaddr, int errcode)
{
pgd_t gpgd;
@@ -246,16 +246,16 @@
if ((errcode & 2) && !(pte_flags(gpte) & _PAGE_RW))
return 0;
- /* User access to a kernel page? (bit 3 == user access) */
+ /* User access to a kernel-only page? (bit 3 == user access) */
if ((errcode & 4) && !(pte_flags(gpte) & _PAGE_USER))
return 0;
/* Check that the Guest PTE flags are OK, and the page number is below
* the pfn_limit (ie. not mapping the Launcher binary). */
check_gpte(lg, gpte);
+
/* Add the _PAGE_ACCESSED and (for a write) _PAGE_DIRTY flag */
gpte = pte_mkyoung(gpte);
-
if (errcode & 2)
gpte = pte_mkdirty(gpte);
@@ -272,23 +272,28 @@
else
/* If this is a read, don't set the "writable" bit in the page
* table entry, even if the Guest says it's writable. That way
- * we come back here when a write does actually ocur, so we can
- * update the Guest's _PAGE_DIRTY flag. */
+ * we will come back here when a write does actually occur, so
+ * we can update the Guest's _PAGE_DIRTY flag. */
*spte = gpte_to_spte(lg, pte_wrprotect(gpte), 0);
/* Finally, we write the Guest PTE entry back: we've set the
* _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */
lgwrite(lg, gpte_ptr, pte_t, gpte);
- /* We succeeded in mapping the page! */
+ /* The fault is fixed, the page table is populated, the mapping
+ * manipulated, the result returned and the code complete. A small
+ * delay and a trace of alliteration are the only indications the Guest
+ * has that a page fault occurred at all. */
return 1;
}
-/*H:360 (ii) Setting up the page table entry for the Guest stack.
+/*H:360
+ * (ii) Making sure the Guest stack is mapped.
*
- * Remember pin_stack_pages() which makes sure the stack is mapped? It could
- * simply call demand_page(), but as we've seen that logic is quite long, and
- * usually the stack pages are already mapped anyway, so it's not required.
+ * Remember that direct traps into the Guest need a mapped Guest kernel stack.
+ * pin_stack_pages() calls us here: we could simply call demand_page(), but as
+ * we've seen that logic is quite long, and usually the stack pages are already
+ * mapped, so it's overkill.
*
* This is a quick version which answers the question: is this virtual address
* mapped by the shadow page tables, and is it writable? */
@@ -297,7 +302,7 @@
pgd_t *spgd;
unsigned long flags;
- /* Look at the top level entry: is it present? */
+ /* Look at the current top level entry: is it present? */
spgd = spgd_addr(lg, lg->pgdidx, vaddr);
if (!(pgd_flags(*spgd) & _PAGE_PRESENT))
return 0;
@@ -333,15 +338,14 @@
release_pte(ptepage[i]);
/* Now we can free the page of PTEs */
free_page((long)ptepage);
- /* And zero out the PGD entry we we never release it twice. */
+ /* And zero out the PGD entry so we never release it twice. */
*spgd = __pgd(0);
}
}
-/*H:440 (v) Flushing (thowing away) page tables,
- *
- * We saw flush_user_mappings() called when we re-used a top-level pgdir page.
- * It simply releases every PTE page from 0 up to the kernel address. */
+/*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings()
+ * hypercall and once in new_pgdir() when we re-used a top-level pgdir page.
+ * It simply releases every PTE page from 0 up to the Guest's kernel address. */
static void flush_user_mappings(struct lguest *lg, int idx)
{
unsigned int i;
@@ -350,8 +354,10 @@
release_pgd(lg, lg->pgdirs[idx].pgdir + i);
}
-/* The Guest also has a hypercall to do this manually: it's used when a large
- * number of mappings have been changed. */
+/*H:440 (v) Flushing (throwing away) page tables,
+ *
+ * The Guest has a hypercall to throw away the page tables: it's used when a
+ * large number of mappings have been changed. */
void guest_pagetable_flush_user(struct lguest *lg)
{
/* Drop the userspace part of the current page table. */
@@ -423,8 +429,9 @@
/*H:430 (iv) Switching page tables
*
- * This is what happens when the Guest changes page tables (ie. changes the
- * top-level pgdir). This happens on almost every context switch. */
+ * Now we've seen all the page table setting and manipulation, let's see what
+ * what happens when the Guest changes page tables (ie. changes the top-level
+ * pgdir). This occurs on almost every context switch. */
void guest_new_pagetable(struct lguest *lg, unsigned long pgtable)
{
int newpgdir, repin = 0;
@@ -443,7 +450,8 @@
}
/*H:470 Finally, a routine which throws away everything: all PGD entries in all
- * the shadow page tables. This is used when we destroy the Guest. */
+ * the shadow page tables, including the Guest's kernel mappings. This is used
+ * when we destroy the Guest. */
static void release_all_pagetables(struct lguest *lg)
{
unsigned int i, j;
@@ -458,13 +466,22 @@
/* We also throw away everything when a Guest tells us it's changed a kernel
* mapping. Since kernel mappings are in every page table, it's easiest to
- * throw them all away. This is amazingly slow, but thankfully rare. */
+ * throw them all away. This traps the Guest in amber for a while as
+ * everything faults back in, but it's rare. */
void guest_pagetable_clear_all(struct lguest *lg)
{
release_all_pagetables(lg);
/* We need the Guest kernel stack mapped again. */
pin_stack_pages(lg);
}
+/*:*/
+/*M:009 Since we throw away all mappings when a kernel mapping changes, our
+ * performance sucks for guests using highmem. In fact, a guest with
+ * PAGE_OFFSET 0xc0000000 (the default) and more than about 700MB of RAM is
+ * usually slower than a Guest with less memory.
+ *
+ * This, of course, cannot be fixed. It would take some kind of... well, I
+ * don't know, but the term "puissant code-fu" comes to mind. :*/
/*H:420 This is the routine which actually sets the page table entry for then
* "idx"'th shadow page table.
@@ -483,7 +500,7 @@
static void do_set_pte(struct lguest *lg, int idx,
unsigned long vaddr, pte_t gpte)
{
- /* Look up the matching shadow page directot entry. */
+ /* Look up the matching shadow page directory entry. */
pgd_t *spgd = spgd_addr(lg, idx, vaddr);
/* If the top level isn't present, there's no entry to update. */
@@ -500,7 +517,8 @@
*spte = gpte_to_spte(lg, gpte,
pte_flags(gpte) & _PAGE_DIRTY);
} else
- /* Otherwise we can demand_page() it in later. */
+ /* Otherwise kill it and we can demand_page() it in
+ * later. */
*spte = __pte(0);
}
}
@@ -535,7 +553,7 @@
}
/*H:400
- * (iii) Setting up a page table entry when the Guest tells us it has changed.
+ * (iii) Setting up a page table entry when the Guest tells us one has changed.
*
* Just like we did in interrupts_and_traps.c, it makes sense for us to deal
* with the other side of page tables while we're here: what happens when the
@@ -612,9 +630,10 @@
/*H:480 (vi) Mapping the Switcher when the Guest is about to run.
*
- * The Switcher and the two pages for this CPU need to be available to the
+ * The Switcher and the two pages for this CPU need to be visible in the
* Guest (and not the pages for other CPUs). We have the appropriate PTE pages
- * for each CPU already set up, we just need to hook them in. */
+ * for each CPU already set up, we just need to hook them in now we know which
+ * Guest is about to run on this CPU. */
void map_switcher_in_guest(struct lguest *lg, struct lguest_pages *pages)
{
pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages);
@@ -677,6 +696,18 @@
__pgprot(_PAGE_PRESENT|_PAGE_ACCESSED));
}
+/* We've made it through the page table code. Perhaps our tired brains are
+ * still processing the details, or perhaps we're simply glad it's over.
+ *
+ * If nothing else, note that all this complexity in juggling shadow page
+ * tables in sync with the Guest's page tables is for one reason: for most
+ * Guests this page table dance determines how bad performance will be. This
+ * is why Xen uses exotic direct Guest pagetable manipulation, and why both
+ * Intel and AMD have implemented shadow page table support directly into
+ * hardware.
+ *
+ * There is just one file remaining in the Host. */
+
/*H:510 At boot or module load time, init_pagetables() allocates and populates
* the Switcher PTE page for each CPU. */
__init int init_pagetables(struct page **switcher_page, unsigned int pages)
diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c
index c2434ec..9e189cb 100644
--- a/drivers/lguest/segments.c
+++ b/drivers/lguest/segments.c
@@ -12,8 +12,6 @@
#include "lg.h"
/*H:600
- * We've almost completed the Host; there's just one file to go!
- *
* Segments & The Global Descriptor Table
*
* (That title sounds like a bad Nerdcore group. Not to suggest that there are
@@ -55,7 +53,7 @@
|| num == GDT_ENTRY_DOUBLEFAULT_TSS);
}
-/*H:610 Once the GDT has been changed, we fix the new entries up a little. We
+/*H:630 Once the Guest gave us new GDT entries, we fix them up a little. We
* don't care if they're invalid: the worst that can happen is a General
* Protection Fault in the Switcher when it restores a Guest segment register
* which tries to use that entry. Then we kill the Guest for causing such a
@@ -84,25 +82,33 @@
}
}
-/* This routine is called at boot or modprobe time for each CPU to set up the
- * "constant" GDT entries for Guests running on that CPU. */
+/*H:610 Like the IDT, we never simply use the GDT the Guest gives us. We keep
+ * a GDT for each CPU, and copy across the Guest's entries each time we want to
+ * run the Guest on that CPU.
+ *
+ * This routine is called at boot or modprobe time for each CPU to set up the
+ * constant GDT entries: the ones which are the same no matter what Guest we're
+ * running. */
void setup_default_gdt_entries(struct lguest_ro_state *state)
{
struct desc_struct *gdt = state->guest_gdt;
unsigned long tss = (unsigned long)&state->guest_tss;
- /* The hypervisor segments are full 0-4G segments, privilege level 0 */
+ /* The Switcher segments are full 0-4G segments, privilege level 0 */
gdt[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
gdt[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
- /* The TSS segment refers to the TSS entry for this CPU, so we cannot
- * copy it from the Guest. Forgive the magic flags */
+ /* The TSS segment refers to the TSS entry for this particular CPU.
+ * Forgive the magic flags: the 0x8900 means the entry is Present, it's
+ * privilege level 0 Available 386 TSS system segment, and the 0x67
+ * means Saturn is eclipsed by Mercury in the twelfth house. */
gdt[GDT_ENTRY_TSS].a = 0x00000067 | (tss << 16);
gdt[GDT_ENTRY_TSS].b = 0x00008900 | (tss & 0xFF000000)
| ((tss >> 16) & 0x000000FF);
}
-/* This routine is called before the Guest is run for the first time. */
+/* This routine sets up the initial Guest GDT for booting. All entries start
+ * as 0 (unusable). */
void setup_guest_gdt(struct lguest *lg)
{
/* Start with full 0-4G segments... */
@@ -114,13 +120,8 @@
lg->arch.gdt[GDT_ENTRY_KERNEL_DS].b |= (GUEST_PL << 13);
}
-/* Like the IDT, we never simply use the GDT the Guest gives us. We set up the
- * GDTs for each CPU, then we copy across the entries each time we want to run
- * a different Guest on that CPU. */
-
-/* A partial GDT load, for the three "thead-local storage" entries. Otherwise
- * it's just like load_guest_gdt(). So much, in fact, it would probably be
- * neater to have a single hypercall to cover both. */
+/*H:650 An optimization of copy_gdt(), for just the three "thead-local storage"
+ * entries. */
void copy_gdt_tls(const struct lguest *lg, struct desc_struct *gdt)
{
unsigned int i;
@@ -129,7 +130,9 @@
gdt[i] = lg->arch.gdt[i];
}
-/* This is the full version */
+/*H:640 When the Guest is run on a different CPU, or the GDT entries have
+ * changed, copy_gdt() is called to copy the Guest's GDT entries across to this
+ * CPU's GDT. */
void copy_gdt(const struct lguest *lg, struct desc_struct *gdt)
{
unsigned int i;
@@ -141,7 +144,8 @@
gdt[i] = lg->arch.gdt[i];
}
-/* This is where the Guest asks us to load a new GDT (LHCALL_LOAD_GDT). */
+/*H:620 This is where the Guest asks us to load a new GDT (LHCALL_LOAD_GDT).
+ * We copy it from the Guest and tweak the entries. */
void load_guest_gdt(struct lguest *lg, unsigned long table, u32 num)
{
/* We assume the Guest has the same number of GDT entries as the
@@ -157,16 +161,22 @@
lg->changed |= CHANGED_GDT;
}
+/* This is the fast-track version for just changing the three TLS entries.
+ * Remember that this happens on every context switch, so it's worth
+ * optimizing. But wouldn't it be neater to have a single hypercall to cover
+ * both cases? */
void guest_load_tls(struct lguest *lg, unsigned long gtls)
{
struct desc_struct *tls = &lg->arch.gdt[GDT_ENTRY_TLS_MIN];
__lgread(lg, tls, gtls, sizeof(*tls)*GDT_ENTRY_TLS_ENTRIES);
fixup_gdt_table(lg, GDT_ENTRY_TLS_MIN, GDT_ENTRY_TLS_MAX+1);
+ /* Note that just the TLS entries have changed. */
lg->changed |= CHANGED_GDT_TLS;
}
+/*:*/
-/*
+/*H:660
* With this, we have finished the Host.
*
* Five of the seven parts of our task are complete. You have made it through
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index 9eed12d..482aec2 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -63,7 +63,7 @@
static DEFINE_PER_CPU(struct lguest *, last_guest);
/*S:010
- * We are getting close to the Switcher.
+ * We approach the Switcher.
*
* Remember that each CPU has two pages which are visible to the Guest when it
* runs on that CPU. This has to contain the state for that Guest: we copy the
@@ -134,7 +134,7 @@
*
* The lcall also pushes the old code segment (KERNEL_CS) onto the
* stack, then the address of this call. This stack layout happens to
- * exactly match the stack of an interrupt... */
+ * exactly match the stack layout created by an interrupt... */
asm volatile("pushf; lcall *lguest_entry"
/* This is how we tell GCC that %eax ("a") and %ebx ("b")
* are changed by this routine. The "=" means output. */
@@ -151,40 +151,46 @@
}
/*:*/
+/*M:002 There are hooks in the scheduler which we can register to tell when we
+ * get kicked off the CPU (preempt_notifier_register()). This would allow us
+ * to lazily disable SYSENTER which would regain some performance, and should
+ * also simplify copy_in_guest_info(). Note that we'd still need to restore
+ * things when we exit to Launcher userspace, but that's fairly easy.
+ *
+ * The hooks were designed for KVM, but we can also put them to good use. :*/
+
/*H:040 This is the i386-specific code to setup and run the Guest. Interrupts
* are disabled: we own the CPU. */
void lguest_arch_run_guest(struct lguest *lg)
{
- /* Remember the awfully-named TS bit? If the Guest has asked
- * to set it we set it now, so we can trap and pass that trap
- * to the Guest if it uses the FPU. */
+ /* Remember the awfully-named TS bit? If the Guest has asked to set it
+ * we set it now, so we can trap and pass that trap to the Guest if it
+ * uses the FPU. */
if (lg->ts)
lguest_set_ts();
- /* SYSENTER is an optimized way of doing system calls. We
- * can't allow it because it always jumps to privilege level 0.
- * A normal Guest won't try it because we don't advertise it in
- * CPUID, but a malicious Guest (or malicious Guest userspace
- * program) could, so we tell the CPU to disable it before
- * running the Guest. */
+ /* SYSENTER is an optimized way of doing system calls. We can't allow
+ * it because it always jumps to privilege level 0. A normal Guest
+ * won't try it because we don't advertise it in CPUID, but a malicious
+ * Guest (or malicious Guest userspace program) could, so we tell the
+ * CPU to disable it before running the Guest. */
if (boot_cpu_has(X86_FEATURE_SEP))
wrmsr(MSR_IA32_SYSENTER_CS, 0, 0);
- /* Now we actually run the Guest. It will pop back out when
- * something interesting happens, and we can examine its
- * registers to see what it was doing. */
+ /* Now we actually run the Guest. It will return when something
+ * interesting happens, and we can examine its registers to see what it
+ * was doing. */
run_guest_once(lg, lguest_pages(raw_smp_processor_id()));
- /* The "regs" pointer contains two extra entries which are not
- * really registers: a trap number which says what interrupt or
- * trap made the switcher code come back, and an error code
- * which some traps set. */
+ /* Note that the "regs" pointer contains two extra entries which are
+ * not really registers: a trap number which says what interrupt or
+ * trap made the switcher code come back, and an error code which some
+ * traps set. */
- /* If the Guest page faulted, then the cr2 register will tell
- * us the bad virtual address. We have to grab this now,
- * because once we re-enable interrupts an interrupt could
- * fault and thus overwrite cr2, or we could even move off to a
- * different CPU. */
+ /* If the Guest page faulted, then the cr2 register will tell us the
+ * bad virtual address. We have to grab this now, because once we
+ * re-enable interrupts an interrupt could fault and thus overwrite
+ * cr2, or we could even move off to a different CPU. */
if (lg->regs->trapnum == 14)
lg->arch.last_pagefault = read_cr2();
/* Similarly, if we took a trap because the Guest used the FPU,
@@ -197,14 +203,15 @@
wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
}
-/*H:130 Our Guest is usually so well behaved; it never tries to do things it
- * isn't allowed to. Unfortunately, Linux's paravirtual infrastructure isn't
- * quite complete, because it doesn't contain replacements for the Intel I/O
- * instructions. As a result, the Guest sometimes fumbles across one during
- * the boot process as it probes for various things which are usually attached
- * to a PC.
+/*H:130 Now we've examined the hypercall code; our Guest can make requests.
+ * Our Guest is usually so well behaved; it never tries to do things it isn't
+ * allowed to, and uses hypercalls instead. Unfortunately, Linux's paravirtual
+ * infrastructure isn't quite complete, because it doesn't contain replacements
+ * for the Intel I/O instructions. As a result, the Guest sometimes fumbles
+ * across one during the boot process as it probes for various things which are
+ * usually attached to a PC.
*
- * When the Guest uses one of these instructions, we get trap #13 (General
+ * When the Guest uses one of these instructions, we get a trap (General
* Protection Fault) and come here. We see if it's one of those troublesome
* instructions and skip over it. We return true if we did. */
static int emulate_insn(struct lguest *lg)
@@ -275,43 +282,43 @@
void lguest_arch_handle_trap(struct lguest *lg)
{
switch (lg->regs->trapnum) {
- case 13: /* We've intercepted a GPF. */
- /* Check if this was one of those annoying IN or OUT
- * instructions which we need to emulate. If so, we
- * just go back into the Guest after we've done it. */
+ case 13: /* We've intercepted a General Protection Fault. */
+ /* Check if this was one of those annoying IN or OUT
+ * instructions which we need to emulate. If so, we just go
+ * back into the Guest after we've done it. */
if (lg->regs->errcode == 0) {
if (emulate_insn(lg))
return;
}
break;
- case 14: /* We've intercepted a page fault. */
- /* The Guest accessed a virtual address that wasn't
- * mapped. This happens a lot: we don't actually set
- * up most of the page tables for the Guest at all when
- * we start: as it runs it asks for more and more, and
- * we set them up as required. In this case, we don't
- * even tell the Guest that the fault happened.
- *
- * The errcode tells whether this was a read or a
- * write, and whether kernel or userspace code. */
+ case 14: /* We've intercepted a Page Fault. */
+ /* The Guest accessed a virtual address that wasn't mapped.
+ * This happens a lot: we don't actually set up most of the
+ * page tables for the Guest at all when we start: as it runs
+ * it asks for more and more, and we set them up as
+ * required. In this case, we don't even tell the Guest that
+ * the fault happened.
+ *
+ * The errcode tells whether this was a read or a write, and
+ * whether kernel or userspace code. */
if (demand_page(lg, lg->arch.last_pagefault, lg->regs->errcode))
return;
- /* OK, it's really not there (or not OK): the Guest
- * needs to know. We write out the cr2 value so it
- * knows where the fault occurred.
- *
- * Note that if the Guest were really messed up, this
- * could happen before it's done the INITIALIZE
- * hypercall, so lg->lguest_data will be NULL */
+ /* OK, it's really not there (or not OK): the Guest needs to
+ * know. We write out the cr2 value so it knows where the
+ * fault occurred.
+ *
+ * Note that if the Guest were really messed up, this could
+ * happen before it's done the LHCALL_LGUEST_INIT hypercall, so
+ * lg->lguest_data could be NULL */
if (lg->lguest_data &&
put_user(lg->arch.last_pagefault, &lg->lguest_data->cr2))
kill_guest(lg, "Writing cr2");
break;
case 7: /* We've intercepted a Device Not Available fault. */
- /* If the Guest doesn't want to know, we already
- * restored the Floating Point Unit, so we just
- * continue without telling it. */
+ /* If the Guest doesn't want to know, we already restored the
+ * Floating Point Unit, so we just continue without telling
+ * it. */
if (!lg->ts)
return;
break;
@@ -536,9 +543,6 @@
return 0;
}
-/* Now we've examined the hypercall code; our Guest can make requests. There
- * is one other way we can do things for the Guest, as we see in
- * emulate_insn(). :*/
/*L:030 lguest_arch_setup_regs()
*
@@ -562,7 +566,7 @@
* is supposed to always be "1". Bit 9 (0x200) controls whether
* interrupts are enabled. We always leave interrupts enabled while
* running the Guest. */
- regs->eflags = 0x202;
+ regs->eflags = X86_EFLAGS_IF | 0x2;
/* The "Extended Instruction Pointer" register says where the Guest is
* running. */
@@ -570,8 +574,8 @@
/* %esi points to our boot information, at physical address 0, so don't
* touch it. */
+
/* There are a couple of GDT entries the Guest expects when first
* booting. */
-
setup_guest_gdt(lg);
}
diff --git a/drivers/lguest/x86/switcher_32.S b/drivers/lguest/x86/switcher_32.S
index 1010b90..0af8baa 100644
--- a/drivers/lguest/x86/switcher_32.S
+++ b/drivers/lguest/x86/switcher_32.S
@@ -6,6 +6,37 @@
* are feeling invigorated and refreshed then the next, more challenging stage
* can be found in "make Guest". :*/
+/*M:012 Lguest is meant to be simple: my rule of thumb is that 1% more LOC must
+ * gain at least 1% more performance. Since neither LOC nor performance can be
+ * measured beforehand, it generally means implementing a feature then deciding
+ * if it's worth it. And once it's implemented, who can say no?
+ *
+ * This is why I haven't implemented this idea myself. I want to, but I
+ * haven't. You could, though.
+ *
+ * The main place where lguest performance sucks is Guest page faulting. When
+ * a Guest userspace process hits an unmapped page we switch back to the Host,
+ * walk the page tables, find it's not mapped, switch back to the Guest page
+ * fault handler, which calls a hypercall to set the page table entry, then
+ * finally returns to userspace. That's two round-trips.
+ *
+ * If we had a small walker in the Switcher, we could quickly check the Guest
+ * page table and if the page isn't mapped, immediately reflect the fault back
+ * into the Guest. This means the Switcher would have to know the top of the
+ * Guest page table and the page fault handler address.
+ *
+ * For simplicity, the Guest should only handle the case where the privilege
+ * level of the fault is 3 and probably only not present or write faults. It
+ * should also detect recursive faults, and hand the original fault to the
+ * Host (which is actually really easy).
+ *
+ * Two questions remain. Would the performance gain outweigh the complexity?
+ * And who would write the verse documenting it? :*/
+
+/*M:011 Lguest64 handles NMI. This gave me NMI envy (until I looked at their
+ * code). It's worth doing though, since it would let us use oprofile in the
+ * Host when a Guest is running. :*/
+
/*S:100
* Welcome to the Switcher itself!
*
@@ -88,7 +119,7 @@
// All saved and there's now five steps before us:
// Stack, GDT, IDT, TSS
- // And last of all the page tables are flipped.
+ // Then last of all the page tables are flipped.
// Yet beware that our stack pointer must be
// Always valid lest an NMI hits
@@ -103,25 +134,25 @@
lgdt LGUEST_PAGES_guest_gdt_desc(%eax)
// The Guest's IDT we did partially
- // Move to the "struct lguest_pages" as well.
+ // Copy to "struct lguest_pages" as well.
lidt LGUEST_PAGES_guest_idt_desc(%eax)
// The TSS entry which controls traps
// Must be loaded up with "ltr" now:
+ // The GDT entry that TSS uses
+ // Changes type when we load it: damn Intel!
// For after we switch over our page tables
- // It (as the rest) will be writable no more.
- // (The GDT entry TSS needs
- // Changes type when we load it: damn Intel!)
+ // That entry will be read-only: we'd crash.
movl $(GDT_ENTRY_TSS*8), %edx
ltr %dx
// Look back now, before we take this last step!
// The Host's TSS entry was also marked used;
- // Let's clear it again, ere we return.
+ // Let's clear it again for our return.
// The GDT descriptor of the Host
// Points to the table after two "size" bytes
movl (LGUEST_PAGES_host_gdt_desc+2)(%eax), %edx
- // Clear the type field of "used" (byte 5, bit 2)
+ // Clear "used" from type field (byte 5, bit 2)
andb $0xFD, (GDT_ENTRY_TSS*8 + 5)(%edx)
// Once our page table's switched, the Guest is live!
@@ -131,7 +162,7 @@
// The page table change did one tricky thing:
// The Guest's register page has been mapped
- // Writable onto our %esp (stack) --
+ // Writable under our %esp (stack) --
// We can simply pop off all Guest regs.
popl %eax
popl %ebx
@@ -152,16 +183,15 @@
addl $8, %esp
// The last five stack slots hold return address
- // And everything needed to change privilege
- // Into the Guest privilege level of 1,
+ // And everything needed to switch privilege
+ // From Switcher's level 0 to Guest's 1,
// And the stack where the Guest had last left it.
// Interrupts are turned back on: we are Guest.
iret
-// There are two paths where we switch to the Host
+// We treat two paths to switch back to the Host
+// Yet both must save Guest state and restore Host
// So we put the routine in a macro.
-// We are on our way home, back to the Host
-// Interrupted out of the Guest, we come here.
#define SWITCH_TO_HOST \
/* We save the Guest state: all registers first \
* Laid out just as "struct lguest_regs" defines */ \
@@ -194,7 +224,7 @@
movl %esp, %eax; \
andl $(~(1 << PAGE_SHIFT - 1)), %eax; \
/* Save our trap number: the switch will obscure it \
- * (The Guest regs are not mapped here in the Host) \
+ * (In the Host the Guest regs are not mapped here) \
* %ebx holds it safe for deliver_to_host */ \
movl LGUEST_PAGES_regs_trapnum(%eax), %ebx; \
/* The Host GDT, IDT and stack! \
@@ -210,9 +240,9 @@
/* Switch to Host's GDT, IDT. */ \
lgdt LGUEST_PAGES_host_gdt_desc(%eax); \
lidt LGUEST_PAGES_host_idt_desc(%eax); \
- /* Restore the Host's stack where it's saved regs lie */ \
+ /* Restore the Host's stack where its saved regs lie */ \
movl LGUEST_PAGES_host_sp(%eax), %esp; \
- /* Last the TSS: our Host is complete */ \
+ /* Last the TSS: our Host is returned */ \
movl $(GDT_ENTRY_TSS*8), %edx; \
ltr %dx; \
/* Restore now the regs saved right at the first. */ \
@@ -222,14 +252,15 @@
popl %ds; \
popl %es
-// Here's where we come when the Guest has just trapped:
-// (Which trap we'll see has been pushed on the stack).
+// The first path is trod when the Guest has trapped:
+// (Which trap it was has been pushed on the stack).
// We need only switch back, and the Host will decode
// Why we came home, and what needs to be done.
return_to_host:
SWITCH_TO_HOST
iret
+// We are lead to the second path like so:
// An interrupt, with some cause external
// Has ajerked us rudely from the Guest's code
// Again we must return home to the Host
@@ -238,7 +269,7 @@
// But now we must go home via that place
// Where that interrupt was supposed to go
// Had we not been ensconced, running the Guest.
- // Here we see the cleverness of our stack:
+ // Here we see the trickness of run_guest_once():
// The Host stack is formed like an interrupt
// With EIP, CS and EFLAGS layered.
// Interrupt handlers end with "iret"
@@ -263,7 +294,7 @@
xorw %ax, %ax
orl %eax, %edx
// Now the address of the handler's in %edx
- // We call it now: its "iret" takes us home.
+ // We call it now: its "iret" drops us home.
jmp *%edx
// Every interrupt can come to us here
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index ac54f69..28c6ae0 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -168,7 +168,7 @@
return -ENOMEM;
}
- sg_set_buf(&sg, cc->key, cc->key_size);
+ sg_init_one(&sg, cc->key, cc->key_size);
desc.tfm = hash_tfm;
desc.flags = CRYPTO_TFM_REQ_MAY_SLEEP;
err = crypto_hash_digest(&desc, &sg, cc->key_size, salt);
@@ -351,14 +351,10 @@
struct scatterlist sg_in, sg_out;
sg_init_table(&sg_in, 1);
- sg_set_page(&sg_in, bv_in->bv_page);
- sg_in.offset = bv_in->bv_offset + ctx->offset_in;
- sg_in.length = 1 << SECTOR_SHIFT;
+ sg_set_page(&sg_in, bv_in->bv_page, 1 << SECTOR_SHIFT, bv_in->bv_offset + ctx->offset_in);
sg_init_table(&sg_out, 1);
- sg_set_page(&sg_out, bv_out->bv_page);
- sg_out.offset = bv_out->bv_offset + ctx->offset_out;
- sg_out.length = 1 << SECTOR_SHIFT;
+ sg_set_page(&sg_out, bv_out->bv_page, 1 << SECTOR_SHIFT, bv_out->bv_offset + ctx->offset_out);
ctx->offset_in += sg_in.length;
if (ctx->offset_in >= bv_in->bv_len) {
diff --git a/drivers/md/raid6algos.c b/drivers/md/raid6algos.c
index 92657615..77a6e4bf 100644
--- a/drivers/md/raid6algos.c
+++ b/drivers/md/raid6algos.c
@@ -52,7 +52,7 @@
&raid6_intx16,
&raid6_intx32,
#endif
-#if defined(__i386__)
+#if defined(__i386__) && !defined(__arch_um__)
&raid6_mmxx1,
&raid6_mmxx2,
&raid6_sse1x1,
@@ -60,7 +60,7 @@
&raid6_sse2x1,
&raid6_sse2x2,
#endif
-#if defined(__x86_64__)
+#if defined(__x86_64__) && !defined(__arch_um__)
&raid6_sse2x1,
&raid6_sse2x2,
&raid6_sse2x4,
diff --git a/drivers/md/raid6mmx.c b/drivers/md/raid6mmx.c
index 6181a5a..d4e4a1b 100644
--- a/drivers/md/raid6mmx.c
+++ b/drivers/md/raid6mmx.c
@@ -16,7 +16,7 @@
* MMX implementation of RAID-6 syndrome functions
*/
-#if defined(__i386__)
+#if defined(__i386__) && !defined(__arch_um__)
#include "raid6.h"
#include "raid6x86.h"
diff --git a/drivers/md/raid6sse1.c b/drivers/md/raid6sse1.c
index f0a1ba8..0666237 100644
--- a/drivers/md/raid6sse1.c
+++ b/drivers/md/raid6sse1.c
@@ -21,7 +21,7 @@
* worthwhile as a separate implementation.
*/
-#if defined(__i386__)
+#if defined(__i386__) && !defined(__arch_um__)
#include "raid6.h"
#include "raid6x86.h"
diff --git a/drivers/md/raid6sse2.c b/drivers/md/raid6sse2.c
index 0f01976..b034ad8 100644
--- a/drivers/md/raid6sse2.c
+++ b/drivers/md/raid6sse2.c
@@ -17,7 +17,7 @@
*
*/
-#if defined(__i386__) || defined(__x86_64__)
+#if (defined(__i386__) || defined(__x86_64__)) && !defined(__arch_um__)
#include "raid6.h"
#include "raid6x86.h"
@@ -161,7 +161,7 @@
#endif
-#ifdef __x86_64__
+#if defined(__x86_64__) && !defined(__arch_um__)
/*
* Unrolled-by-4 SSE2 implementation
diff --git a/drivers/md/raid6x86.h b/drivers/md/raid6x86.h
index 9111950..99fea7a 100644
--- a/drivers/md/raid6x86.h
+++ b/drivers/md/raid6x86.h
@@ -19,7 +19,7 @@
#ifndef LINUX_RAID_RAID6X86_H
#define LINUX_RAID_RAID6X86_H
-#if defined(__i386__) || defined(__x86_64__)
+#if (defined(__i386__) || defined(__x86_64__)) && !defined(__arch_um__)
#ifdef __KERNEL__ /* Real code */
diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c
index 2b1f8b4..cb034ea 100644
--- a/drivers/media/common/saa7146_core.c
+++ b/drivers/media/common/saa7146_core.c
@@ -118,8 +118,7 @@
if (NULL == pg)
goto err;
BUG_ON(PageHighMem(pg));
- sg_set_page(&sglist[i], pg);
- sglist[i].length = PAGE_SIZE;
+ sg_set_page(&sglist[i], pg, PAGE_SIZE, 0);
}
return sglist;
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 285fca6..623eea2 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -741,7 +741,7 @@
return i2c_bit_add_bus(&itv->i2c_adap);
}
-void __devexit exit_ivtv_i2c(struct ivtv *itv)
+void exit_ivtv_i2c(struct ivtv *itv)
{
IVTV_DEBUG_I2C("i2c exit\n");
diff --git a/drivers/media/video/ivtv/ivtv-i2c.h b/drivers/media/video/ivtv/ivtv-i2c.h
index 677c329..de6a074 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.h
+++ b/drivers/media/video/ivtv/ivtv-i2c.h
@@ -36,6 +36,6 @@
/* init + register i2c algo-bit adapter */
int __devinit init_ivtv_i2c(struct ivtv *itv);
-void __devexit exit_ivtv_i2c(struct ivtv *itv);
+void exit_ivtv_i2c(struct ivtv *itv);
#endif
diff --git a/drivers/media/video/ivtv/ivtv-udma.c b/drivers/media/video/ivtv/ivtv-udma.c
index 912b424..460db03 100644
--- a/drivers/media/video/ivtv/ivtv-udma.c
+++ b/drivers/media/video/ivtv/ivtv-udma.c
@@ -49,8 +49,6 @@
unsigned int len = (i == dma_page->page_count - 1) ?
dma_page->tail : PAGE_SIZE - offset;
- dma->SGlist[map_offset].length = len;
- dma->SGlist[map_offset].offset = offset;
if (PageHighMem(dma->map[map_offset])) {
void *src;
@@ -63,10 +61,10 @@
memcpy(page_address(dma->bouncemap[map_offset]) + offset, src, len);
kunmap_atomic(src, KM_BOUNCE_READ);
local_irq_restore(flags);
- sg_set_page(&dma->SGlist[map_offset], dma->bouncemap[map_offset]);
+ sg_set_page(&dma->SGlist[map_offset], dma->bouncemap[map_offset], len, offset);
}
else {
- sg_set_page(&dma->SGlist[map_offset], dma->map[map_offset]);
+ sg_set_page(&dma->SGlist[map_offset], dma->map[map_offset], len, offset);
}
offset = 0;
map_offset++;
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index 9ab94a7..44ee408 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -67,8 +67,7 @@
if (NULL == pg)
goto err;
BUG_ON(PageHighMem(pg));
- sg_set_page(&sglist[i], pg);
- sglist[i].length = PAGE_SIZE;
+ sg_set_page(&sglist[i], pg, PAGE_SIZE, 0);
}
return sglist;
@@ -95,16 +94,13 @@
if (PageHighMem(pages[0]))
/* DMA to highmem pages might not work */
goto highmem;
- sg_set_page(&sglist[0], pages[0]);
- sglist[0].offset = offset;
- sglist[0].length = PAGE_SIZE - offset;
+ sg_set_page(&sglist[0], pages[0], PAGE_SIZE - offset, offset);
for (i = 1; i < nr_pages; i++) {
if (NULL == pages[i])
goto nopage;
if (PageHighMem(pages[i]))
goto highmem;
- sg_set_page(&sglist[i], pages[i]);
- sglist[i].length = PAGE_SIZE;
+ sg_set_page(&sglist[i], pages[i], PAGE_SIZE, 0);
}
return sglist;
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index d602ba6..6824061 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -284,6 +284,7 @@
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&ireq->queue);
+ sg_init_table(ireq->sg_table, I2O_MAX_PHYS_SEGMENTS);
return ireq;
};
diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c
index d366a6cc..c8d62c2 100644
--- a/drivers/misc/fujitsu-laptop.c
+++ b/drivers/misc/fujitsu-laptop.c
@@ -122,9 +122,6 @@
else
fujitsu->brightness_changed = 0;
- if (status < 0)
- return status;
-
return fujitsu->brightness_level;
}
@@ -198,7 +195,7 @@
/* ACPI device */
-int acpi_fujitsu_add(struct acpi_device *device)
+static int acpi_fujitsu_add(struct acpi_device *device)
{
int result = 0;
int state = 0;
@@ -229,7 +226,7 @@
return result;
}
-int acpi_fujitsu_remove(struct acpi_device *device, int type)
+static int acpi_fujitsu_remove(struct acpi_device *device, int type)
{
ACPI_FUNCTION_TRACE("acpi_fujitsu_remove");
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index bf4bc6a..7471d49 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -267,15 +267,26 @@
int mmc_send_csd(struct mmc_card *card, u32 *csd)
{
+ int ret, i;
+
if (!mmc_host_is_spi(card->host))
return mmc_send_cxd_native(card->host, card->rca << 16,
csd, MMC_SEND_CSD);
- return mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd, 16);
+ ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd, 16);
+ if (ret)
+ return ret;
+
+ for (i = 0;i < 4;i++)
+ csd[i] = be32_to_cpu(csd[i]);
+
+ return 0;
}
int mmc_send_cid(struct mmc_host *host, u32 *cid)
{
+ int ret, i;
+
if (!mmc_host_is_spi(host)) {
if (!host->card)
return -EINVAL;
@@ -283,7 +294,14 @@
cid, MMC_SEND_CID);
}
- return mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid, 16);
+ ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid, 16);
+ if (ret)
+ return ret;
+
+ for (i = 0;i < 4;i++)
+ cid[i] = be32_to_cpu(cid[i]);
+
+ return 0;
}
int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index ee4029a..a6dafe6 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -294,8 +294,8 @@
if (data.error)
return data.error;
- scr[0] = ntohl(scr[0]);
- scr[1] = ntohl(scr[1]);
+ scr[0] = be32_to_cpu(scr[0]);
+ scr[1] = be32_to_cpu(scr[1]);
return 0;
}
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index bcbb6d2..c3926eb 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -40,13 +40,13 @@
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
#include <linux/mmc/host.h>
#include <asm/io.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1100_mmc.h>
-#include <asm/scatterlist.h>
#include <au1xxx.h>
#include "au1xmmc.h"
@@ -212,12 +212,12 @@
}
if (data) {
- if (flags & MMC_DATA_READ) {
+ if (data->flags & MMC_DATA_READ) {
if (data->blocks > 1)
mmccmd |= SD_CMD_CT_4;
else
mmccmd |= SD_CMD_CT_2;
- } else if (flags & MMC_DATA_WRITE) {
+ } else if (data->flags & MMC_DATA_WRITE) {
if (data->blocks > 1)
mmccmd |= SD_CMD_CT_3;
else
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index fc72e1f..f2070a1 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -262,7 +262,7 @@
}
/* Convert back to virtual address */
- host->data_ptr = (u16*)sg_virt(sg);
+ host->data_ptr = (u16*)sg_virt(data->sg);
host->data_cnt = 0;
clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events);
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 12c2d80..a646921 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1165,6 +1165,23 @@
return IRQ_HANDLED;
}
+struct count_children {
+ unsigned n;
+ struct bus_type *bus;
+};
+
+static int maybe_count_child(struct device *dev, void *c)
+{
+ struct count_children *ccp = c;
+
+ if (dev->bus == ccp->bus) {
+ if (ccp->n)
+ return -EBUSY;
+ ccp->n++;
+ }
+ return 0;
+}
+
static int mmc_spi_probe(struct spi_device *spi)
{
void *ones;
@@ -1188,33 +1205,30 @@
return status;
}
- /* We can use the bus safely iff nobody else will interfere with
- * us. That is, either we have the experimental exclusive access
- * primitives ... or else there's nobody to share it with.
+ /* We can use the bus safely iff nobody else will interfere with us.
+ * Most commands consist of one SPI message to issue a command, then
+ * several more to collect its response, then possibly more for data
+ * transfer. Clocking access to other devices during that period will
+ * corrupt the command execution.
+ *
+ * Until we have software primitives which guarantee non-interference,
+ * we'll aim for a hardware-level guarantee.
+ *
+ * REVISIT we can't guarantee another device won't be added later...
*/
if (spi->master->num_chipselect > 1) {
- struct device *parent = spi->dev.parent;
+ struct count_children cc;
- /* If there are multiple devices on this bus, we
- * can't proceed.
- */
- spin_lock(&parent->klist_children.k_lock);
- if (parent->klist_children.k_list.next
- != parent->klist_children.k_list.prev)
- status = -EMLINK;
- else
- status = 0;
- spin_unlock(&parent->klist_children.k_lock);
+ cc.n = 0;
+ cc.bus = spi->dev.bus;
+ status = device_for_each_child(spi->dev.parent, &cc,
+ maybe_count_child);
if (status < 0) {
dev_err(&spi->dev, "can't share SPI bus\n");
return status;
}
- /* REVISIT we can't guarantee another device won't
- * be added later. It's uncommon though ... for now,
- * work as if this is safe.
- */
- dev_warn(&spi->dev, "ASSUMING unshared SPI bus!\n");
+ dev_warn(&spi->dev, "ASSUMING SPI bus stays unshared!\n");
}
/* We need a supply of ones to transmit. This is the only time
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index d0eb0a2..95244a7 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -20,11 +20,11 @@
#include <linux/mmc/host.h>
#include <linux/amba/bus.h>
#include <linux/clk.h>
+#include <linux/scatterlist.h>
#include <asm/cacheflush.h>
#include <asm/div64.h>
#include <asm/io.h>
-#include <asm/scatterlist.h>
#include <asm/sizes.h>
#include <asm/mach/mmc.h>
@@ -167,7 +167,7 @@
* partially written to a page is properly coherent.
*/
if (host->sg_len && data->flags & MMC_DATA_READ)
- flush_dcache_page(host->sg_ptr->page);
+ flush_dcache_page(sg_page(host->sg_ptr));
}
if (status & MCI_DATAEND) {
mmci_stop_data(host);
@@ -319,7 +319,7 @@
* page, ensure that the data cache is coherent.
*/
if (status & MCI_RXACTIVE)
- flush_dcache_page(host->sg_ptr->page);
+ flush_dcache_page(sg_page(host->sg_ptr));
if (!mmci_next_sg(host))
break;
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 0601e01..1654a33 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -29,7 +29,6 @@
#include <asm/dma.h>
#include <asm/io.h>
-#include <asm/scatterlist.h>
#include <asm/sizes.h>
#include <asm/arch/pxa-regs.h>
@@ -40,6 +39,7 @@
#define DRIVER_NAME "pxa2xx-mci"
#define NR_SG 1
+#define CLKRT_OFF (~0)
struct pxamci_host {
struct mmc_host *mmc;
@@ -372,6 +372,9 @@
unsigned long rate = host->clkrate;
unsigned int clk = rate / ios->clock;
+ if (host->clkrt == CLKRT_OFF)
+ clk_enable(host->clk);
+
/*
* clk might result in a lower divisor than we
* desire. check for that condition and adjust
@@ -380,14 +383,16 @@
if (rate / clk > ios->clock)
clk <<= 1;
host->clkrt = fls(clk) - 1;
- clk_enable(host->clk);
/*
* we write clkrt on the next command
*/
} else {
pxamci_stop_clock(host);
- clk_disable(host->clk);
+ if (host->clkrt != CLKRT_OFF) {
+ host->clkrt = CLKRT_OFF;
+ clk_disable(host->clk);
+ }
}
if (host->power_mode != ios->power_mode) {
@@ -499,6 +504,7 @@
host->mmc = mmc;
host->dma = -1;
host->pdata = pdev->dev.platform_data;
+ host->clkrt = CLKRT_OFF;
host->clk = clk_get(&pdev->dev, "MMCCLK");
if (IS_ERR(host->clk)) {
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index d7c5b94..6b80bf7 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -17,8 +17,6 @@
#include <linux/mmc/host.h>
-#include <asm/scatterlist.h>
-
#include "sdhci.h"
#define DRIVER_NAME "sdhci"
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index fa4c8c5..4d5f374 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -33,10 +33,10 @@
#include <linux/pnp.h>
#include <linux/highmem.h>
#include <linux/mmc/host.h>
+#include <linux/scatterlist.h>
#include <asm/io.h>
#include <asm/dma.h>
-#include <asm/scatterlist.h>
#include "wbsd.h"
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 86b8641..5f800a6 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -166,13 +166,14 @@
If you don't have this card, of course say N.
config IP1000
- tristate "IP1000 Gigabit Ethernet support"
- depends on PCI && EXPERIMENTAL
- ---help---
- This driver supports IP1000 gigabit Ethernet cards.
+ tristate "IP1000 Gigabit Ethernet support"
+ depends on PCI && EXPERIMENTAL
+ select MII
+ ---help---
+ This driver supports IP1000 gigabit Ethernet cards.
- To compile this driver as a module, choose M here: the module
- will be called ipg. This is recommended.
+ To compile this driver as a module, choose M here: the module
+ will be called ipg. This is recommended.
source "drivers/net/arcnet/Kconfig"
@@ -1880,6 +1881,28 @@
Say Y here if you want to use the second built-in 10/100 Fast
ethernet controller on some Motorola ColdFire processors.
+config FEC_MPC52xx
+ tristate "MPC52xx FEC driver"
+ depends on PPC_MERGE && PPC_MPC52xx && PPC_BESTCOMM_FEC
+ select CRC32
+ select PHYLIB
+ ---help---
+ This option enables support for the MPC5200's on-chip
+ Fast Ethernet Controller
+ If compiled as module, it will be called 'fec_mpc52xx.ko'.
+
+config FEC_MPC52xx_MDIO
+ bool "MPC52xx FEC MDIO bus driver"
+ depends on FEC_MPC52xx
+ default y
+ ---help---
+ The MPC5200's FEC can connect to the Ethernet either with
+ an external MII PHY chip or 10 Mbps 7-wire interface
+ (Motorola? industry standard).
+ If your board uses an external PHY connected to FEC, enable this.
+ If not sure, enable.
+ If compiled as module, it will be called 'fec_mpc52xx_phy.ko'.
+
config NE_H8300
tristate "NE2000 compatible support for H8/300"
depends on H8300
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 5932620..0e5fde4 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -96,6 +96,10 @@
obj-$(CONFIG_HP100) += hp100.o
obj-$(CONFIG_SMC9194) += smc9194.o
obj-$(CONFIG_FEC) += fec.o
+obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
+ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
+ obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
+endif
obj-$(CONFIG_68360_ENET) += 68360enet.o
obj-$(CONFIG_WD80x3) += wd.o 8390.o
obj-$(CONFIG_EL2) += 3c503.o 8390.o
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 53fe7de..084acfd 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -371,7 +371,6 @@
if (phydev->speed != lp->old_speed) {
#if defined(CONFIG_BFIN_MAC_RMII)
u32 opmode = bfin_read_EMAC_OPMODE();
- bf537mac_disable();
switch (phydev->speed) {
case 10:
opmode |= RMII_10;
@@ -386,7 +385,6 @@
break;
}
bfin_write_EMAC_OPMODE(opmode);
- bf537mac_enable();
#endif
new_state = 1;
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6909bec..6937ef0 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -188,6 +188,7 @@
/*-------------------------- Forward declarations ---------------------------*/
static void bond_send_gratuitous_arp(struct bonding *bond);
+static void bond_deinit(struct net_device *bond_dev);
/*---------------------------- General routines -----------------------------*/
@@ -3681,7 +3682,7 @@
}
if (bond->params.mode == BOND_MODE_8023AD) {
- INIT_DELAYED_WORK(&bond->ad_work, bond_alb_monitor);
+ INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
queue_delayed_work(bond->wq, &bond->ad_work, 0);
/* register to receive LACPDUs */
bond_register_lacpdu(bond);
@@ -4449,7 +4450,7 @@
/* De-initialize device specific data.
* Caller must hold rtnl_lock.
*/
-void bond_deinit(struct net_device *bond_dev)
+static void bond_deinit(struct net_device *bond_dev)
{
struct bonding *bond = bond_dev->priv;
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index d1ed14b..61c1b45 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -302,7 +302,6 @@
int bond_create(char *name, struct bond_params *params, struct bonding **newbond);
void bond_destroy(struct bonding *bond);
int bond_release_and_destroy(struct net_device *bond_dev, struct net_device *slave_dev);
-void bond_deinit(struct net_device *bond_dev);
int bond_create_sysfs(void);
void bond_destroy_sysfs(void);
void bond_destroy_sysfs_entry(struct bonding *bond);
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 57541d2..6fd95a2 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -34,6 +34,7 @@
#include <linux/skbuff.h>
#include <linux/mii.h>
#include <linux/phy.h>
+#include <linux/phy_fixed.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <asm/gpio.h>
@@ -53,12 +54,6 @@
MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus");
#define CPMAC_VERSION "0.5.0"
-/* stolen from net/ieee80211.h */
-#ifndef MAC_FMT
-#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
-#define MAC_ARG(x) ((u8*)(x))[0], ((u8*)(x))[1], ((u8*)(x))[2], \
- ((u8*)(x))[3], ((u8*)(x))[4], ((u8*)(x))[5]
-#endif
/* frame size + 802.1q tag */
#define CPMAC_SKB_SIZE (ETH_FRAME_LEN + 4)
#define CPMAC_QUEUES 8
@@ -211,6 +206,7 @@
struct net_device *dev;
struct work_struct reset_work;
struct platform_device *pdev;
+ struct napi_struct napi;
};
static irqreturn_t cpmac_irq(int, void *);
@@ -362,47 +358,48 @@
}
}
-static struct sk_buff *cpmac_rx_one(struct net_device *dev,
- struct cpmac_priv *priv,
+static struct sk_buff *cpmac_rx_one(struct cpmac_priv *priv,
struct cpmac_desc *desc)
{
struct sk_buff *skb, *result = NULL;
if (unlikely(netif_msg_hw(priv)))
- cpmac_dump_desc(dev, desc);
+ cpmac_dump_desc(priv->dev, desc);
cpmac_write(priv->regs, CPMAC_RX_ACK(0), (u32)desc->mapping);
if (unlikely(!desc->datalen)) {
if (netif_msg_rx_err(priv) && net_ratelimit())
printk(KERN_WARNING "%s: rx: spurious interrupt\n",
- dev->name);
+ priv->dev->name);
return NULL;
}
- skb = netdev_alloc_skb(dev, CPMAC_SKB_SIZE);
+ skb = netdev_alloc_skb(priv->dev, CPMAC_SKB_SIZE);
if (likely(skb)) {
skb_reserve(skb, 2);
skb_put(desc->skb, desc->datalen);
- desc->skb->protocol = eth_type_trans(desc->skb, dev);
+ desc->skb->protocol = eth_type_trans(desc->skb, priv->dev);
desc->skb->ip_summed = CHECKSUM_NONE;
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += desc->datalen;
+ priv->dev->stats.rx_packets++;
+ priv->dev->stats.rx_bytes += desc->datalen;
result = desc->skb;
- dma_unmap_single(&dev->dev, desc->data_mapping, CPMAC_SKB_SIZE,
- DMA_FROM_DEVICE);
+ dma_unmap_single(&priv->dev->dev, desc->data_mapping,
+ CPMAC_SKB_SIZE, DMA_FROM_DEVICE);
desc->skb = skb;
- desc->data_mapping = dma_map_single(&dev->dev, skb->data,
+ desc->data_mapping = dma_map_single(&priv->dev->dev, skb->data,
CPMAC_SKB_SIZE,
DMA_FROM_DEVICE);
desc->hw_data = (u32)desc->data_mapping;
if (unlikely(netif_msg_pktdata(priv))) {
- printk(KERN_DEBUG "%s: received packet:\n", dev->name);
- cpmac_dump_skb(dev, result);
+ printk(KERN_DEBUG "%s: received packet:\n",
+ priv->dev->name);
+ cpmac_dump_skb(priv->dev, result);
}
} else {
if (netif_msg_rx_err(priv) && net_ratelimit())
printk(KERN_WARNING
- "%s: low on skbs, dropping packet\n", dev->name);
- dev->stats.rx_dropped++;
+ "%s: low on skbs, dropping packet\n",
+ priv->dev->name);
+ priv->dev->stats.rx_dropped++;
}
desc->buflen = CPMAC_SKB_SIZE;
@@ -411,25 +408,25 @@
return result;
}
-static int cpmac_poll(struct net_device *dev, int *budget)
+static int cpmac_poll(struct napi_struct *napi, int budget)
{
struct sk_buff *skb;
struct cpmac_desc *desc;
- int received = 0, quota = min(dev->quota, *budget);
- struct cpmac_priv *priv = netdev_priv(dev);
+ int received = 0;
+ struct cpmac_priv *priv = container_of(napi, struct cpmac_priv, napi);
spin_lock(&priv->rx_lock);
if (unlikely(!priv->rx_head)) {
if (netif_msg_rx_err(priv) && net_ratelimit())
printk(KERN_WARNING "%s: rx: polling, but no queue\n",
- dev->name);
- netif_rx_complete(dev);
+ priv->dev->name);
+ netif_rx_complete(priv->dev, napi);
return 0;
}
desc = priv->rx_head;
- while ((received < quota) && ((desc->dataflags & CPMAC_OWN) == 0)) {
- skb = cpmac_rx_one(dev, priv, desc);
+ while (((desc->dataflags & CPMAC_OWN) == 0) && (received < budget)) {
+ skb = cpmac_rx_one(priv, desc);
if (likely(skb)) {
netif_receive_skb(skb);
received++;
@@ -439,13 +436,11 @@
priv->rx_head = desc;
spin_unlock(&priv->rx_lock);
- *budget -= received;
- dev->quota -= received;
if (unlikely(netif_msg_rx_status(priv)))
- printk(KERN_DEBUG "%s: poll processed %d packets\n", dev->name,
- received);
+ printk(KERN_DEBUG "%s: poll processed %d packets\n",
+ priv->dev->name, received);
if (desc->dataflags & CPMAC_OWN) {
- netif_rx_complete(dev);
+ netif_rx_complete(priv->dev, napi);
cpmac_write(priv->regs, CPMAC_RX_PTR(0), (u32)desc->mapping);
cpmac_write(priv->regs, CPMAC_RX_INT_ENABLE, 1);
return 0;
@@ -655,6 +650,7 @@
spin_unlock(&priv->rx_lock);
cpmac_clear_tx(priv->dev);
cpmac_hw_start(priv->dev);
+ napi_enable(&priv->napi);
netif_start_queue(priv->dev);
}
@@ -681,8 +677,10 @@
if (status & MAC_INT_RX) {
queue = (status >> 8) & 7;
- netif_rx_schedule(dev);
- cpmac_write(priv->regs, CPMAC_RX_INT_CLEAR, 1 << queue);
+ if (netif_rx_schedule_prep(dev, &priv->napi)) {
+ cpmac_write(priv->regs, CPMAC_RX_INT_CLEAR, 1 << queue);
+ __netif_rx_schedule(dev, &priv->napi);
+ }
}
cpmac_write(priv->regs, CPMAC_MAC_EOI_VECTOR, 0);
@@ -692,6 +690,7 @@
printk(KERN_ERR "%s: hw error, resetting...\n",
dev->name);
netif_stop_queue(dev);
+ napi_disable(&priv->napi);
cpmac_hw_stop(dev);
schedule_work(&priv->reset_work);
if (unlikely(netif_msg_hw(priv)))
@@ -849,6 +848,15 @@
spin_unlock(&priv->lock);
}
+static int cpmac_link_update(struct net_device *dev,
+ struct fixed_phy_status *status)
+{
+ status->link = 1;
+ status->speed = 100;
+ status->duplex = 1;
+ return 0;
+}
+
static int cpmac_open(struct net_device *dev)
{
int i, size, res;
@@ -857,15 +865,6 @@
struct cpmac_desc *desc;
struct sk_buff *skb;
- priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link,
- 0, PHY_INTERFACE_MODE_MII);
- if (IS_ERR(priv->phy)) {
- if (netif_msg_drv(priv))
- printk(KERN_ERR "%s: Could not attach to PHY\n",
- dev->name);
- return PTR_ERR(priv->phy);
- }
-
mem = platform_get_resource_byname(priv->pdev, IORESOURCE_MEM, "regs");
if (!request_mem_region(mem->start, mem->end - mem->start, dev->name)) {
if (netif_msg_drv(priv))
@@ -927,6 +926,7 @@
INIT_WORK(&priv->reset_work, cpmac_hw_error);
cpmac_hw_start(dev);
+ napi_enable(&priv->napi);
priv->phy->state = PHY_CHANGELINK;
phy_start(priv->phy);
@@ -951,8 +951,6 @@
release_mem_region(mem->start, mem->end - mem->start);
fail_reserve:
- phy_disconnect(priv->phy);
-
return res;
}
@@ -965,9 +963,8 @@
netif_stop_queue(dev);
cancel_work_sync(&priv->reset_work);
+ napi_disable(&priv->napi);
phy_stop(priv->phy);
- phy_disconnect(priv->phy);
- priv->phy = NULL;
cpmac_hw_stop(dev);
@@ -1001,11 +998,13 @@
static int __devinit cpmac_probe(struct platform_device *pdev)
{
- int rc, phy_id;
+ int rc, phy_id, i;
struct resource *mem;
struct cpmac_priv *priv;
struct net_device *dev;
struct plat_cpmac_data *pdata;
+ struct fixed_info *fixed_phy;
+ DECLARE_MAC_BUF(mac);
pdata = pdev->dev.platform_data;
@@ -1053,21 +1052,51 @@
dev->set_multicast_list = cpmac_set_multicast_list;
dev->tx_timeout = cpmac_tx_timeout;
dev->ethtool_ops = &cpmac_ethtool_ops;
- dev->poll = cpmac_poll;
- dev->weight = 64;
dev->features |= NETIF_F_MULTI_QUEUE;
+ netif_napi_add(dev, &priv->napi, cpmac_poll, 64);
+
spin_lock_init(&priv->lock);
spin_lock_init(&priv->rx_lock);
priv->dev = dev;
priv->ring_size = 64;
priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
+
if (phy_id == 31) {
- snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT,
- cpmac_mii.id, phy_id);
- } else
- snprintf(priv->phy_name, BUS_ID_SIZE, "fixed@%d:%d", 100, 1);
+ snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, cpmac_mii.id,
+ phy_id);
+ } else {
+ /* Let's try to get a free fixed phy... */
+ for (i = 0; i < MAX_PHY_AMNT; i++) {
+ fixed_phy = fixed_mdio_get_phydev(i);
+ if (!fixed_phy)
+ continue;
+ if (!fixed_phy->phydev->attached_dev) {
+ strncpy(priv->phy_name,
+ fixed_phy->phydev->dev.bus_id,
+ BUS_ID_SIZE);
+ fixed_mdio_set_link_update(fixed_phy->phydev,
+ &cpmac_link_update);
+ goto phy_found;
+ }
+ }
+ if (netif_msg_drv(priv))
+ printk(KERN_ERR "%s: Could not find fixed PHY\n",
+ dev->name);
+ rc = -ENODEV;
+ goto fail;
+ }
+
+phy_found:
+ priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+ if (IS_ERR(priv->phy)) {
+ if (netif_msg_drv(priv))
+ printk(KERN_ERR "%s: Could not attach to PHY\n",
+ dev->name);
+ return PTR_ERR(priv->phy);
+ }
if ((rc = register_netdev(dev))) {
printk(KERN_ERR "cpmac: error %i registering device %s\n", rc,
@@ -1077,9 +1106,9 @@
if (netif_msg_probe(priv)) {
printk(KERN_INFO
- "cpmac: device %s (regs: %p, irq: %d, phy: %s, mac: "
- MAC_FMT ")\n", dev->name, (void *)mem->start, dev->irq,
- priv->phy_name, MAC_ARG(dev->dev_addr));
+ "cpmac: device %s (regs: %p, irq: %d, phy: %s, "
+ "mac: %s)\n", dev->name, (void *)mem->start, dev->irq,
+ priv->phy_name, print_mac(mac, dev->dev_addr));
}
return 0;
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 781ed99..3b84028 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -351,4 +351,12 @@
__E1000_DOWN
};
+extern char e1000_driver_name[];
+extern const char e1000_driver_version[];
+
+extern void e1000_power_up_phy(struct e1000_adapter *);
+extern void e1000_set_ethtool_ops(struct net_device *netdev);
+extern void e1000_check_options(struct e1000_adapter *adapter);
+
+
#endif /* _E1000_H_ */
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 6c9a643..667f18b 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -32,9 +32,6 @@
#include <asm/uaccess.h>
-extern char e1000_driver_name[];
-extern char e1000_driver_version[];
-
extern int e1000_up(struct e1000_adapter *adapter);
extern void e1000_down(struct e1000_adapter *adapter);
extern void e1000_reinit_locked(struct e1000_adapter *adapter);
@@ -733,16 +730,16 @@
#define REG_PATTERN_TEST(R, M, W) \
{ \
- uint32_t pat, value; \
- uint32_t test[] = \
+ uint32_t pat, val; \
+ const uint32_t test[] = \
{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \
- for (pat = 0; pat < ARRAY_SIZE(test); pat++) { \
+ for (pat = 0; pat < ARRAY_SIZE(test); pat++) { \
E1000_WRITE_REG(&adapter->hw, R, (test[pat] & W)); \
- value = E1000_READ_REG(&adapter->hw, R); \
- if (value != (test[pat] & W & M)) { \
+ val = E1000_READ_REG(&adapter->hw, R); \
+ if (val != (test[pat] & W & M)) { \
DPRINTK(DRV, ERR, "pattern test reg %04X failed: got " \
"0x%08X expected 0x%08X\n", \
- E1000_##R, value, (test[pat] & W & M)); \
+ E1000_##R, val, (test[pat] & W & M)); \
*data = (adapter->hw.mac_type < e1000_82543) ? \
E1000_82542_##R : E1000_##R; \
return 1; \
@@ -752,12 +749,12 @@
#define REG_SET_AND_CHECK(R, M, W) \
{ \
- uint32_t value; \
+ uint32_t val; \
E1000_WRITE_REG(&adapter->hw, R, W & M); \
- value = E1000_READ_REG(&adapter->hw, R); \
- if ((W & M) != (value & M)) { \
+ val = E1000_READ_REG(&adapter->hw, R); \
+ if ((W & M) != (val & M)) { \
DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\
- "expected 0x%08X\n", E1000_##R, (value & M), (W & M)); \
+ "expected 0x%08X\n", E1000_##R, (val & M), (W & M)); \
*data = (adapter->hw.mac_type < e1000_82543) ? \
E1000_82542_##R : E1000_##R; \
return 1; \
@@ -1621,8 +1618,6 @@
}
}
-extern void e1000_power_up_phy(struct e1000_adapter *);
-
static void
e1000_diag_test(struct net_device *netdev,
struct ethtool_test *eth_test, uint64_t *data)
@@ -1859,8 +1854,8 @@
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- if (!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
- data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
+ if (!data)
+ data = INT_MAX;
if (adapter->hw.mac_type < e1000_82571) {
if (!adapter->blink_timer.function) {
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 8fa0fe4..7c6888c 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -8607,7 +8607,7 @@
DEBUGFUNC("e1000_read_ich8_data");
- if (size < 1 || size > 2 || data == 0x0 ||
+ if (size < 1 || size > 2 || data == NULL ||
index > ICH_FLASH_LINEAR_ADDR_MASK)
return error;
@@ -8841,7 +8841,7 @@
* amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the
* bank size may be 4, 8 or 64 KBytes
*****************************************************************************/
-int32_t
+static int32_t
e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank)
{
union ich8_hws_flash_status hsfsts;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index f1ce348..72deff0d 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -37,8 +37,8 @@
#define DRIVERNAPI "-NAPI"
#endif
#define DRV_VERSION "7.3.20-k2"DRIVERNAPI
-char e1000_driver_version[] = DRV_VERSION;
-static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
+const char e1000_driver_version[] = DRV_VERSION;
+static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
/* e1000_pci_tbl - PCI Device ID Table
*
@@ -188,7 +188,6 @@
static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
int cmd);
-void e1000_set_ethtool_ops(struct net_device *netdev);
static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
static void e1000_tx_timeout(struct net_device *dev);
@@ -213,8 +212,6 @@
static void e1000_netpoll (struct net_device *netdev);
#endif
-extern void e1000_check_options(struct e1000_adapter *adapter);
-
#define COPYBREAK_DEFAULT 256
static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
module_param(copybreak, uint, 0644);
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index f485874..e6565ce 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -46,7 +46,7 @@
#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
#define E1000_PARAM(X, desc) \
static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
- static int num_##X = 0; \
+ static unsigned int num_##X; \
module_param_array_named(X, X, int, &num_##X, 0); \
MODULE_PARM_DESC(X, desc);
@@ -198,9 +198,9 @@
struct e1000_option {
enum { enable_option, range_option, list_option } type;
- char *name;
- char *err;
- int def;
+ const char *name;
+ const char *err;
+ int def;
union {
struct { /* range_option info */
int min;
@@ -214,8 +214,9 @@
};
static int __devinit
-e1000_validate_option(int *value, struct e1000_option *opt,
- struct e1000_adapter *adapter)
+e1000_validate_option(unsigned int *value,
+ const struct e1000_option *opt,
+ struct e1000_adapter *adapter)
{
if (*value == OPTION_UNSET) {
*value = opt->def;
@@ -348,7 +349,7 @@
};
if (num_XsumRX > bd) {
- int rx_csum = XsumRX[bd];
+ unsigned int rx_csum = XsumRX[bd];
e1000_validate_option(&rx_csum, &opt, adapter);
adapter->rx_csum = rx_csum;
} else {
@@ -374,7 +375,7 @@
};
if (num_FlowControl > bd) {
- int fc = FlowControl[bd];
+ unsigned int fc = FlowControl[bd];
e1000_validate_option(&fc, &opt, adapter);
adapter->hw.fc = adapter->hw.original_fc = fc;
} else {
@@ -506,7 +507,7 @@
};
if (num_SmartPowerDownEnable > bd) {
- int spd = SmartPowerDownEnable[bd];
+ unsigned int spd = SmartPowerDownEnable[bd];
e1000_validate_option(&spd, &opt, adapter);
adapter->smart_power_down = spd;
} else {
@@ -522,7 +523,7 @@
};
if (num_KumeranLockLoss > bd) {
- int kmrn_lock_loss = KumeranLockLoss[bd];
+ unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
} else {
@@ -581,7 +582,7 @@
static void __devinit
e1000_check_copper_options(struct e1000_adapter *adapter)
{
- int speed, dplx, an;
+ unsigned int speed, dplx, an;
int bd = adapter->bd_number;
{ /* Speed */
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index cf70522..14141a5 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -283,7 +283,7 @@
adapter->flags &= ~FLAG_HAS_WOL;
/* quad ports only support WoL on port A */
if (adapter->flags & FLAG_IS_QUAD_PORT &&
- (!adapter->flags & FLAG_IS_QUAD_PORT_A))
+ (!(adapter->flags & FLAG_IS_QUAD_PORT_A)))
adapter->flags &= ~FLAG_HAS_WOL;
break;
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index d2499bb..473f78d 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -122,7 +122,8 @@
u16 next_to_watch;
};
/* RX */
- struct page *page;
+ /* arrays of page information for packet split */
+ struct e1000_ps_page *ps_pages;
};
};
@@ -142,8 +143,6 @@
/* array of buffer information structs */
struct e1000_buffer *buffer_info;
- /* arrays of page information for packet split */
- struct e1000_ps_page *ps_pages;
struct sk_buff *rx_skb_top;
struct e1000_queue_stats stats;
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 0666e62..6a39784 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1680,8 +1680,8 @@
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
- data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+ if (!data)
+ data = INT_MAX;
if (adapter->hw.phy.type == e1000_phy_ife) {
if (!adapter->blink_timer.function) {
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 033e124..4fd2e23 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -245,37 +245,36 @@
rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
for (j = 0; j < PS_PAGE_BUFFERS; j++) {
- ps_page = &rx_ring->ps_pages[(i * PS_PAGE_BUFFERS)
- + j];
- if (j < adapter->rx_ps_pages) {
- if (!ps_page->page) {
- ps_page->page = alloc_page(GFP_ATOMIC);
- if (!ps_page->page) {
- adapter->alloc_rx_buff_failed++;
- goto no_buffers;
- }
- ps_page->dma = pci_map_page(pdev,
- ps_page->page,
- 0, PAGE_SIZE,
- PCI_DMA_FROMDEVICE);
- if (pci_dma_mapping_error(
- ps_page->dma)) {
- dev_err(&adapter->pdev->dev,
- "RX DMA page map failed\n");
- adapter->rx_dma_failed++;
- goto no_buffers;
- }
- }
- /*
- * Refresh the desc even if buffer_addrs
- * didn't change because each write-back
- * erases this info.
- */
- rx_desc->read.buffer_addr[j+1] =
- cpu_to_le64(ps_page->dma);
- } else {
+ ps_page = &buffer_info->ps_pages[j];
+ if (j >= adapter->rx_ps_pages) {
+ /* all unused desc entries get hw null ptr */
rx_desc->read.buffer_addr[j+1] = ~0;
+ continue;
}
+ if (!ps_page->page) {
+ ps_page->page = alloc_page(GFP_ATOMIC);
+ if (!ps_page->page) {
+ adapter->alloc_rx_buff_failed++;
+ goto no_buffers;
+ }
+ ps_page->dma = pci_map_page(pdev,
+ ps_page->page,
+ 0, PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(ps_page->dma)) {
+ dev_err(&adapter->pdev->dev,
+ "RX DMA page map failed\n");
+ adapter->rx_dma_failed++;
+ goto no_buffers;
+ }
+ }
+ /*
+ * Refresh the desc even if buffer_addrs
+ * didn't change because each write-back
+ * erases this info.
+ */
+ rx_desc->read.buffer_addr[j+1] =
+ cpu_to_le64(ps_page->dma);
}
skb = netdev_alloc_skb(netdev,
@@ -334,94 +333,6 @@
}
/**
- * e1000_alloc_rx_buffers_jumbo - Replace used jumbo receive buffers
- *
- * @adapter: address of board private structure
- * @cleaned_count: number of buffers to allocate this pass
- **/
-static void e1000_alloc_rx_buffers_jumbo(struct e1000_adapter *adapter,
- int cleaned_count)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- struct e1000_rx_desc *rx_desc;
- struct e1000_buffer *buffer_info;
- struct sk_buff *skb;
- unsigned int i;
- unsigned int bufsz = 256 -
- 16 /*for skb_reserve */ -
- NET_IP_ALIGN;
-
- i = rx_ring->next_to_use;
- buffer_info = &rx_ring->buffer_info[i];
-
- while (cleaned_count--) {
- skb = buffer_info->skb;
- if (skb) {
- skb_trim(skb, 0);
- goto check_page;
- }
-
- skb = netdev_alloc_skb(netdev, bufsz);
- if (!skb) {
- /* Better luck next round */
- adapter->alloc_rx_buff_failed++;
- break;
- }
-
- /* Make buffer alignment 2 beyond a 16 byte boundary
- * this will result in a 16 byte aligned IP header after
- * the 14 byte MAC header is removed
- */
- skb_reserve(skb, NET_IP_ALIGN);
-
- buffer_info->skb = skb;
-check_page:
- /* allocate a new page if necessary */
- if (!buffer_info->page) {
- buffer_info->page = alloc_page(GFP_ATOMIC);
- if (!buffer_info->page) {
- adapter->alloc_rx_buff_failed++;
- break;
- }
- }
-
- if (!buffer_info->dma)
- buffer_info->dma = pci_map_page(pdev,
- buffer_info->page, 0,
- PAGE_SIZE,
- PCI_DMA_FROMDEVICE);
- if (pci_dma_mapping_error(buffer_info->dma)) {
- dev_err(&adapter->pdev->dev, "RX DMA page map failed\n");
- adapter->rx_dma_failed++;
- break;
- }
-
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
-
- i++;
- if (i == rx_ring->count)
- i = 0;
- buffer_info = &rx_ring->buffer_info[i];
- }
-
- if (rx_ring->next_to_use != i) {
- rx_ring->next_to_use = i;
- if (i-- == 0)
- i = (rx_ring->count - 1);
-
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
- writel(i, adapter->hw.hw_addr + rx_ring->tail);
- }
-}
-
-/**
* e1000_clean_rx_irq - Send received data up the network stack; legacy
* @adapter: board private structure
*
@@ -495,10 +406,6 @@
goto next_desc;
}
- /* adjust length to remove Ethernet CRC */
- length -= 4;
-
- /* probably a little skewed due to removing CRC */
total_rx_bytes += length;
total_rx_packets++;
@@ -554,15 +461,6 @@
return cleaned;
}
-static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
- u16 length)
-{
- bi->page = NULL;
- skb->len += length;
- skb->data_len += length;
- skb->truesize += length;
-}
-
static void e1000_put_txbuf(struct e1000_adapter *adapter,
struct e1000_buffer *buffer_info)
{
@@ -699,174 +597,6 @@
}
/**
- * e1000_clean_rx_irq_jumbo - Send received data up the network stack; legacy
- * @adapter: board private structure
- *
- * the return value indicates whether actual cleaning was done, there
- * is no guarantee that everything was cleaned
- **/
-static bool e1000_clean_rx_irq_jumbo(struct e1000_adapter *adapter,
- int *work_done, int work_to_do)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- struct e1000_rx_desc *rx_desc, *next_rxd;
- struct e1000_buffer *buffer_info, *next_buffer;
- u32 length;
- unsigned int i;
- int cleaned_count = 0;
- bool cleaned = 0;
- unsigned int total_rx_bytes = 0, total_rx_packets = 0;
-
- i = rx_ring->next_to_clean;
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- buffer_info = &rx_ring->buffer_info[i];
-
- while (rx_desc->status & E1000_RXD_STAT_DD) {
- struct sk_buff *skb;
- u8 status;
-
- if (*work_done >= work_to_do)
- break;
- (*work_done)++;
-
- status = rx_desc->status;
- skb = buffer_info->skb;
- buffer_info->skb = NULL;
-
- i++;
- if (i == rx_ring->count)
- i = 0;
- next_rxd = E1000_RX_DESC(*rx_ring, i);
- prefetch(next_rxd);
-
- next_buffer = &rx_ring->buffer_info[i];
-
- cleaned = 1;
- cleaned_count++;
- pci_unmap_page(pdev,
- buffer_info->dma,
- PAGE_SIZE,
- PCI_DMA_FROMDEVICE);
- buffer_info->dma = 0;
-
- length = le16_to_cpu(rx_desc->length);
-
- /* errors is only valid for DD + EOP descriptors */
- if ((status & E1000_RXD_STAT_EOP) &&
- (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
- /* recycle both page and skb */
- buffer_info->skb = skb;
- /* an error means any chain goes out the window too */
- if (rx_ring->rx_skb_top)
- dev_kfree_skb(rx_ring->rx_skb_top);
- rx_ring->rx_skb_top = NULL;
- goto next_desc;
- }
-
-#define rxtop rx_ring->rx_skb_top
- if (!(status & E1000_RXD_STAT_EOP)) {
- /* this descriptor is only the beginning (or middle) */
- if (!rxtop) {
- /* this is the beginning of a chain */
- rxtop = skb;
- skb_fill_page_desc(rxtop, 0, buffer_info->page,
- 0, length);
- } else {
- /* this is the middle of a chain */
- skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->page, 0,
- length);
- /* re-use the skb, only consumed the page */
- buffer_info->skb = skb;
- }
- e1000_consume_page(buffer_info, rxtop, length);
- goto next_desc;
- } else {
- if (rxtop) {
- /* end of the chain */
- skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->page, 0, length);
- /* re-use the current skb, we only consumed the
- * page */
- buffer_info->skb = skb;
- skb = rxtop;
- rxtop = NULL;
- e1000_consume_page(buffer_info, skb, length);
- } else {
- /* no chain, got EOP, this buf is the packet
- * copybreak to save the put_page/alloc_page */
- if (length <= copybreak &&
- skb_tailroom(skb) >= length) {
- u8 *vaddr;
- vaddr = kmap_atomic(buffer_info->page,
- KM_SKB_DATA_SOFTIRQ);
- memcpy(skb_tail_pointer(skb),
- vaddr, length);
- kunmap_atomic(vaddr,
- KM_SKB_DATA_SOFTIRQ);
- /* re-use the page, so don't erase
- * buffer_info->page */
- skb_put(skb, length);
- } else {
- skb_fill_page_desc(skb, 0,
- buffer_info->page, 0,
- length);
- e1000_consume_page(buffer_info, skb,
- length);
- }
- }
- }
-
- /* Receive Checksum Offload XXX recompute due to CRC strip? */
- e1000_rx_checksum(adapter,
- (u32)(status) |
- ((u32)(rx_desc->errors) << 24),
- le16_to_cpu(rx_desc->csum), skb);
-
- pskb_trim(skb, skb->len - 4);
-
- /* probably a little skewed due to removing CRC */
- total_rx_bytes += skb->len;
- total_rx_packets++;
-
- /* eth type trans needs skb->data to point to something */
- if (!pskb_may_pull(skb, ETH_HLEN)) {
- ndev_err(netdev, "__pskb_pull_tail failed.\n");
- dev_kfree_skb(skb);
- goto next_desc;
- }
-
- e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
-
-next_desc:
- rx_desc->status = 0;
-
- /* return some buffers to hardware, one at a time is too slow */
- if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
- adapter->alloc_rx_buf(adapter, cleaned_count);
- cleaned_count = 0;
- }
-
- /* use prefetched values */
- rx_desc = next_rxd;
- buffer_info = next_buffer;
- }
- rx_ring->next_to_clean = i;
-
- cleaned_count = e1000_desc_unused(rx_ring);
- if (cleaned_count)
- adapter->alloc_rx_buf(adapter, cleaned_count);
-
- adapter->total_rx_packets += total_rx_packets;
- adapter->total_rx_bytes += total_rx_bytes;
- return cleaned;
-}
-
-/**
* e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
* @adapter: board private structure
*
@@ -953,7 +683,7 @@
((length + l1) <= adapter->rx_ps_bsize0)) {
u8 *vaddr;
- ps_page = &rx_ring->ps_pages[i * PS_PAGE_BUFFERS];
+ ps_page = &buffer_info->ps_pages[0];
/* there is no documentation about how to call
* kmap_atomic, so we can't hold the mapping
@@ -965,8 +695,7 @@
kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
pci_dma_sync_single_for_device(pdev, ps_page->dma,
PAGE_SIZE, PCI_DMA_FROMDEVICE);
- /* remove the CRC */
- l1 -= 4;
+
skb_put(skb, l1);
goto copydone;
} /* if */
@@ -977,7 +706,7 @@
if (!length)
break;
- ps_page = &rx_ring->ps_pages[(i * PS_PAGE_BUFFERS) + j];
+ ps_page = &buffer_info->ps_pages[j];
pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE,
PCI_DMA_FROMDEVICE);
ps_page->dma = 0;
@@ -988,10 +717,6 @@
skb->truesize += length;
}
- /* strip the ethernet crc, problem is we're using pages now so
- * this whole operation can get a little cpu intensive */
- pskb_trim(skb, skb->len - 4);
-
copydone:
total_rx_bytes += skb->len;
total_rx_packets++;
@@ -1043,7 +768,6 @@
struct e1000_buffer *buffer_info;
struct e1000_ps_page *ps_page;
struct pci_dev *pdev = adapter->pdev;
- unsigned long size;
unsigned int i, j;
/* Free all the Rx ring sk_buffs */
@@ -1054,9 +778,6 @@
pci_unmap_single(pdev, buffer_info->dma,
adapter->rx_buffer_len,
PCI_DMA_FROMDEVICE);
- else if (adapter->clean_rx == e1000_clean_rx_irq_jumbo)
- pci_unmap_page(pdev, buffer_info->dma,
- PAGE_SIZE, PCI_DMA_FROMDEVICE);
else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
pci_unmap_single(pdev, buffer_info->dma,
adapter->rx_ps_bsize0,
@@ -1064,19 +785,13 @@
buffer_info->dma = 0;
}
- if (buffer_info->page) {
- put_page(buffer_info->page);
- buffer_info->page = NULL;
- }
-
if (buffer_info->skb) {
dev_kfree_skb(buffer_info->skb);
buffer_info->skb = NULL;
}
for (j = 0; j < PS_PAGE_BUFFERS; j++) {
- ps_page = &rx_ring->ps_pages[(i * PS_PAGE_BUFFERS)
- + j];
+ ps_page = &buffer_info->ps_pages[j];
if (!ps_page->page)
break;
pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE,
@@ -1093,12 +808,6 @@
rx_ring->rx_skb_top = NULL;
}
- size = sizeof(struct e1000_buffer) * rx_ring->count;
- memset(rx_ring->buffer_info, 0, size);
- size = sizeof(struct e1000_ps_page)
- * (rx_ring->count * PS_PAGE_BUFFERS);
- memset(rx_ring->ps_pages, 0, size);
-
/* Zero out the descriptor ring */
memset(rx_ring->desc, 0, rx_ring->size);
@@ -1421,7 +1130,8 @@
int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
{
struct e1000_ring *rx_ring = adapter->rx_ring;
- int size, desc_len, err = -ENOMEM;
+ struct e1000_buffer *buffer_info;
+ int i, size, desc_len, err = -ENOMEM;
size = sizeof(struct e1000_buffer) * rx_ring->count;
rx_ring->buffer_info = vmalloc(size);
@@ -1429,11 +1139,14 @@
goto err;
memset(rx_ring->buffer_info, 0, size);
- rx_ring->ps_pages = kcalloc(rx_ring->count * PS_PAGE_BUFFERS,
- sizeof(struct e1000_ps_page),
- GFP_KERNEL);
- if (!rx_ring->ps_pages)
- goto err;
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
+ sizeof(struct e1000_ps_page),
+ GFP_KERNEL);
+ if (!buffer_info->ps_pages)
+ goto err_pages;
+ }
desc_len = sizeof(union e1000_rx_desc_packet_split);
@@ -1443,16 +1156,21 @@
err = e1000_alloc_ring_dma(adapter, rx_ring);
if (err)
- goto err;
+ goto err_pages;
rx_ring->next_to_clean = 0;
rx_ring->next_to_use = 0;
rx_ring->rx_skb_top = NULL;
return 0;
+
+err_pages:
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ kfree(buffer_info->ps_pages);
+ }
err:
vfree(rx_ring->buffer_info);
- kfree(rx_ring->ps_pages);
ndev_err(adapter->netdev,
"Unable to allocate memory for the transmit descriptor ring\n");
return err;
@@ -1518,15 +1236,17 @@
{
struct pci_dev *pdev = adapter->pdev;
struct e1000_ring *rx_ring = adapter->rx_ring;
+ int i;
e1000_clean_rx_ring(adapter);
+ for (i = 0; i < rx_ring->count; i++) {
+ kfree(rx_ring->buffer_info[i].ps_pages);
+ }
+
vfree(rx_ring->buffer_info);
rx_ring->buffer_info = NULL;
- kfree(rx_ring->ps_pages);
- rx_ring->ps_pages = NULL;
-
dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
rx_ring->dma);
rx_ring->desc = NULL;
@@ -2032,9 +1752,11 @@
ew32(RFCTL, rfctl);
- /* disable the stripping of CRC because it breaks
- * BMC firmware connected over SMBUS */
- rctl |= E1000_RCTL_DTYP_PS /* | E1000_RCTL_SECRC */;
+ /* Enable Packet split descriptors */
+ rctl |= E1000_RCTL_DTYP_PS;
+
+ /* Enable hardware CRC frame stripping */
+ rctl |= E1000_RCTL_SECRC;
psrctl |= adapter->rx_ps_bsize0 >>
E1000_PSRCTL_BSIZE0_SHIFT;
@@ -2077,11 +1799,6 @@
sizeof(union e1000_rx_desc_packet_split);
adapter->clean_rx = e1000_clean_rx_irq_ps;
adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
- } else if (adapter->netdev->mtu > ETH_FRAME_LEN + VLAN_HLEN + 4) {
- rdlen = rx_ring->count *
- sizeof(struct e1000_rx_desc);
- adapter->clean_rx = e1000_clean_rx_irq_jumbo;
- adapter->alloc_rx_buf = e1000_alloc_rx_buffers_jumbo;
} else {
rdlen = rx_ring->count *
sizeof(struct e1000_rx_desc);
@@ -2326,8 +2043,11 @@
struct e1000_mac_info *mac = &adapter->hw.mac;
struct e1000_hw *hw = &adapter->hw;
u32 tx_space, min_tx_space, min_rx_space;
+ u32 pba;
u16 hwm;
+ ew32(PBA, adapter->pba);
+
if (mac->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN ) {
/* To maintain wire speed transmits, the Tx FIFO should be
* large enough to accommodate two full transmit packets,
@@ -2335,11 +2055,11 @@
* the Rx FIFO should be large enough to accommodate at least
* one full receive packet and is similarly rounded up and
* expressed in KB. */
- adapter->pba = er32(PBA);
+ pba = er32(PBA);
/* upper 16 bits has Tx packet buffer allocation size in KB */
- tx_space = adapter->pba >> 16;
+ tx_space = pba >> 16;
/* lower 16 bits has Rx packet buffer allocation size in KB */
- adapter->pba &= 0xffff;
+ pba &= 0xffff;
/* the tx fifo also stores 16 bytes of information about the tx
* but don't include ethernet FCS because hardware appends it */
min_tx_space = (mac->max_frame_size +
@@ -2355,20 +2075,21 @@
/* If current Tx allocation is less than the min Tx FIFO size,
* and the min Tx FIFO size is less than the current Rx FIFO
* allocation, take space away from current Rx allocation */
- if (tx_space < min_tx_space &&
- ((min_tx_space - tx_space) < adapter->pba)) {
- adapter->pba -= - (min_tx_space - tx_space);
+ if ((tx_space < min_tx_space) &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba -= min_tx_space - tx_space;
/* if short on rx space, rx wins and must trump tx
* adjustment or use Early Receive if available */
- if ((adapter->pba < min_rx_space) &&
+ if ((pba < min_rx_space) &&
(!(adapter->flags & FLAG_HAS_ERT)))
/* ERT enabled in e1000_configure_rx */
- adapter->pba = min_rx_space;
+ pba = min_rx_space;
}
+
+ ew32(PBA, pba);
}
- ew32(PBA, adapter->pba);
/* flow control settings */
/* The high water mark must be low enough to fit one full frame
@@ -3624,9 +3345,7 @@
/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
* means we reserve 2 more, this pushes us to allocate from the next
* larger slab size.
- * i.e. RXBUFFER_2048 --> size-4096 slab
- * however with the new *_jumbo* routines, jumbo receives will use
- * fragmented skbs */
+ * i.e. RXBUFFER_2048 --> size-4096 slab */
if (max_frame <= 256)
adapter->rx_buffer_len = 256;
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index e4e655e..3327892 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -52,10 +52,11 @@
*/
#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
-#define E1000_PARAM(X, desc) \
- static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
- static int num_##X; \
- module_param_array_named(X, X, int, &num_##X, 0); \
+#define E1000_PARAM(X, desc) \
+ static int __devinitdata X[E1000_MAX_NIC+1] \
+ = E1000_PARAM_INIT; \
+ static unsigned int num_##X; \
+ module_param_array_named(X, X, int, &num_##X, 0); \
MODULE_PARM_DESC(X, desc);
@@ -124,9 +125,9 @@
struct e1000_option {
enum { enable_option, range_option, list_option } type;
- char *name;
- char *err;
- int def;
+ const char *name;
+ const char *err;
+ int def;
union {
struct { /* range_option info */
int min;
@@ -139,8 +140,8 @@
} arg;
};
-static int __devinit e1000_validate_option(int *value,
- struct e1000_option *opt,
+static int __devinit e1000_validate_option(unsigned int *value,
+ const struct e1000_option *opt,
struct e1000_adapter *adapter)
{
if (*value == OPTION_UNSET) {
@@ -213,7 +214,7 @@
}
{ /* Transmit Interrupt Delay */
- struct e1000_option opt = {
+ const struct e1000_option opt = {
.type = range_option,
.name = "Transmit Interrupt Delay",
.err = "using default of "
@@ -232,7 +233,7 @@
}
}
{ /* Transmit Absolute Interrupt Delay */
- struct e1000_option opt = {
+ const struct e1000_option opt = {
.type = range_option,
.name = "Transmit Absolute Interrupt Delay",
.err = "using default of "
@@ -277,7 +278,7 @@
}
}
{ /* Receive Absolute Interrupt Delay */
- struct e1000_option opt = {
+ const struct e1000_option opt = {
.type = range_option,
.name = "Receive Absolute Interrupt Delay",
.err = "using default of "
@@ -296,7 +297,7 @@
}
}
{ /* Interrupt Throttling Rate */
- struct e1000_option opt = {
+ const struct e1000_option opt = {
.type = range_option,
.name = "Interrupt Throttling Rate (ints/sec)",
.err = "using default of "
@@ -344,7 +345,7 @@
}
}
{ /* Smart Power Down */
- struct e1000_option opt = {
+ const struct e1000_option opt = {
.type = enable_option,
.name = "PHY Smart Power Down",
.err = "defaulting to Disabled",
@@ -352,7 +353,7 @@
};
if (num_SmartPowerDownEnable > bd) {
- int spd = SmartPowerDownEnable[bd];
+ unsigned int spd = SmartPowerDownEnable[bd];
e1000_validate_option(&spd, &opt, adapter);
if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN)
&& spd)
@@ -360,7 +361,7 @@
}
}
{ /* Kumeran Lock Loss Workaround */
- struct e1000_option opt = {
+ const struct e1000_option opt = {
.type = enable_option,
.name = "Kumeran Lock Loss Workaround",
.err = "defaulting to Enabled",
@@ -368,7 +369,7 @@
};
if (num_KumeranLockLoss > bd) {
- int kmrn_lock_loss = KumeranLockLoss[bd];
+ unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
if (hw->mac.type == e1000_ich8lan)
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index b557bb4..f78e5bf 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0078"
+#define DRV_VERSION "EHEA_0080"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 2809c99..f0319f1 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -33,6 +33,9 @@
#include <linux/if.h>
#include <linux/list.h>
#include <linux/if_ether.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+
#include <net/ip.h>
#include "ehea.h"
@@ -2329,7 +2332,7 @@
{
int i;
- for (i = 0; i < port->num_def_qps; i++)
+ for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++)
napi_disable(&port->port_res[i].napi);
}
@@ -2337,7 +2340,7 @@
{
int i;
- for (i = 0; i < port->num_def_qps; i++)
+ for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++)
napi_enable(&port->port_res[i].napi);
}
@@ -2373,8 +2376,6 @@
ehea_drop_multicast_list(dev);
ehea_free_interrupts(dev);
- port_napi_disable(port);
-
port->state = EHEA_PORT_DOWN;
ret = ehea_clean_all_portres(port);
@@ -2396,6 +2397,7 @@
flush_scheduled_work();
down(&port->port_lock);
netif_stop_queue(dev);
+ port_napi_disable(port);
ret = ehea_down(dev);
up(&port->port_lock);
return ret;
@@ -3296,6 +3298,20 @@
return 0;
}
+static int ehea_reboot_notifier(struct notifier_block *nb,
+ unsigned long action, void *unused)
+{
+ if (action == SYS_RESTART) {
+ ehea_info("Reboot: freeing all eHEA resources");
+ ibmebus_unregister_driver(&ehea_driver);
+ }
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block ehea_reboot_nb = {
+ .notifier_call = ehea_reboot_notifier,
+};
+
static int check_module_parm(void)
{
int ret = 0;
@@ -3352,6 +3368,8 @@
if (ret)
goto out;
+ register_reboot_notifier(&ehea_reboot_nb);
+
ret = ibmebus_register_driver(&ehea_driver);
if (ret) {
ehea_error("failed registering eHEA device driver on ebus");
@@ -3363,6 +3381,7 @@
if (ret) {
ehea_error("failed to register capabilities attribute, ret=%d",
ret);
+ unregister_reboot_notifier(&ehea_reboot_nb);
ibmebus_unregister_driver(&ehea_driver);
goto out;
}
@@ -3376,6 +3395,7 @@
flush_scheduled_work();
driver_remove_file(&ehea_driver.driver, &driver_attr_capabilities);
ibmebus_unregister_driver(&ehea_driver);
+ unregister_reboot_notifier(&ehea_reboot_nb);
ehea_destroy_busmap();
}
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
new file mode 100644
index 0000000..a8a0ee22
--- /dev/null
+++ b/drivers/net/fec_mpc52xx.c
@@ -0,0 +1,1112 @@
+/*
+ * Driver for the MPC5200 Fast Ethernet Controller
+ *
+ * Originally written by Dale Farnsworth <dfarnsworth@mvista.com> and
+ * now maintained by Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Copyright (C) 2007 Domen Puncer, Telargo, Inc.
+ * Copyright (C) 2007 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003-2004 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/hardirq.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/mpc52xx.h>
+
+#include <sysdev/bestcomm/bestcomm.h>
+#include <sysdev/bestcomm/fec.h>
+
+#include "fec_mpc52xx.h"
+
+#define DRIVER_NAME "mpc52xx-fec"
+
+static irqreturn_t mpc52xx_fec_interrupt(int, void *);
+static irqreturn_t mpc52xx_fec_rx_interrupt(int, void *);
+static irqreturn_t mpc52xx_fec_tx_interrupt(int, void *);
+static void mpc52xx_fec_stop(struct net_device *dev);
+static void mpc52xx_fec_start(struct net_device *dev);
+static void mpc52xx_fec_reset(struct net_device *dev);
+
+static u8 mpc52xx_fec_mac_addr[6];
+module_param_array_named(mac, mpc52xx_fec_mac_addr, byte, NULL, 0);
+MODULE_PARM_DESC(mac, "six hex digits, ie. 0x1,0x2,0xc0,0x01,0xba,0xbe");
+
+#define MPC52xx_MESSAGES_DEFAULT ( NETIF_MSG_DRV | NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFDOWN )
+static int debug = -1; /* the above default */
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "debugging messages level");
+
+static void mpc52xx_fec_tx_timeout(struct net_device *dev)
+{
+ dev_warn(&dev->dev, "transmit timed out\n");
+
+ mpc52xx_fec_reset(dev);
+
+ dev->stats.tx_errors++;
+
+ netif_wake_queue(dev);
+}
+
+static void mpc52xx_fec_set_paddr(struct net_device *dev, u8 *mac)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ struct mpc52xx_fec __iomem *fec = priv->fec;
+
+ out_be32(&fec->paddr1, *(u32 *)(&mac[0]));
+ out_be32(&fec->paddr2, (*(u16 *)(&mac[4]) << 16) | FEC_PADDR2_TYPE);
+}
+
+static void mpc52xx_fec_get_paddr(struct net_device *dev, u8 *mac)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ struct mpc52xx_fec __iomem *fec = priv->fec;
+
+ *(u32 *)(&mac[0]) = in_be32(&fec->paddr1);
+ *(u16 *)(&mac[4]) = in_be32(&fec->paddr2) >> 16;
+}
+
+static int mpc52xx_fec_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *sock = addr;
+
+ memcpy(dev->dev_addr, sock->sa_data, dev->addr_len);
+
+ mpc52xx_fec_set_paddr(dev, sock->sa_data);
+ return 0;
+}
+
+static void mpc52xx_fec_free_rx_buffers(struct net_device *dev, struct bcom_task *s)
+{
+ while (!bcom_queue_empty(s)) {
+ struct bcom_fec_bd *bd;
+ struct sk_buff *skb;
+
+ skb = bcom_retrieve_buffer(s, NULL, (struct bcom_bd **)&bd);
+ dma_unmap_single(&dev->dev, bd->skb_pa, skb->len, DMA_FROM_DEVICE);
+ kfree_skb(skb);
+ }
+}
+
+static int mpc52xx_fec_alloc_rx_buffers(struct net_device *dev, struct bcom_task *rxtsk)
+{
+ while (!bcom_queue_full(rxtsk)) {
+ struct sk_buff *skb;
+ struct bcom_fec_bd *bd;
+
+ skb = dev_alloc_skb(FEC_RX_BUFFER_SIZE);
+ if (skb == NULL)
+ return -EAGAIN;
+
+ /* zero out the initial receive buffers to aid debugging */
+ memset(skb->data, 0, FEC_RX_BUFFER_SIZE);
+
+ bd = (struct bcom_fec_bd *)bcom_prepare_next_buffer(rxtsk);
+
+ bd->status = FEC_RX_BUFFER_SIZE;
+ bd->skb_pa = dma_map_single(&dev->dev, skb->data,
+ FEC_RX_BUFFER_SIZE, DMA_FROM_DEVICE);
+
+ bcom_submit_next_buffer(rxtsk, skb);
+ }
+
+ return 0;
+}
+
+/* based on generic_adjust_link from fs_enet-main.c */
+static void mpc52xx_fec_adjust_link(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = priv->phydev;
+ int new_state = 0;
+
+ if (phydev->link != PHY_DOWN) {
+ if (phydev->duplex != priv->duplex) {
+ struct mpc52xx_fec __iomem *fec = priv->fec;
+ u32 rcntrl;
+ u32 tcntrl;
+
+ new_state = 1;
+ priv->duplex = phydev->duplex;
+
+ rcntrl = in_be32(&fec->r_cntrl);
+ tcntrl = in_be32(&fec->x_cntrl);
+
+ rcntrl &= ~FEC_RCNTRL_DRT;
+ tcntrl &= ~FEC_TCNTRL_FDEN;
+ if (phydev->duplex == DUPLEX_FULL)
+ tcntrl |= FEC_TCNTRL_FDEN; /* FD enable */
+ else
+ rcntrl |= FEC_RCNTRL_DRT; /* disable Rx on Tx (HD) */
+
+ out_be32(&fec->r_cntrl, rcntrl);
+ out_be32(&fec->x_cntrl, tcntrl);
+ }
+
+ if (phydev->speed != priv->speed) {
+ new_state = 1;
+ priv->speed = phydev->speed;
+ }
+
+ if (priv->link == PHY_DOWN) {
+ new_state = 1;
+ priv->link = phydev->link;
+ netif_schedule(dev);
+ netif_carrier_on(dev);
+ netif_start_queue(dev);
+ }
+
+ } else if (priv->link) {
+ new_state = 1;
+ priv->link = PHY_DOWN;
+ priv->speed = 0;
+ priv->duplex = -1;
+ netif_stop_queue(dev);
+ netif_carrier_off(dev);
+ }
+
+ if (new_state && netif_msg_link(priv))
+ phy_print_status(phydev);
+}
+
+static int mpc52xx_fec_init_phy(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev;
+ char phy_id[BUS_ID_SIZE];
+
+ snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT,
+ (unsigned int)dev->base_addr, priv->phy_addr);
+
+ priv->link = PHY_DOWN;
+ priv->speed = 0;
+ priv->duplex = -1;
+
+ phydev = phy_connect(dev, phy_id, &mpc52xx_fec_adjust_link, 0, PHY_INTERFACE_MODE_MII);
+ if (IS_ERR(phydev)) {
+ dev_err(&dev->dev, "phy_connect failed\n");
+ return PTR_ERR(phydev);
+ }
+ dev_info(&dev->dev, "attached phy %i to driver %s\n",
+ phydev->addr, phydev->drv->name);
+
+ priv->phydev = phydev;
+
+ return 0;
+}
+
+static int mpc52xx_fec_phy_start(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ int err;
+
+ if (!priv->has_phy)
+ return 0;
+
+ err = mpc52xx_fec_init_phy(dev);
+ if (err) {
+ dev_err(&dev->dev, "mpc52xx_fec_init_phy failed\n");
+ return err;
+ }
+
+ /* reset phy - this also wakes it from PDOWN */
+ phy_write(priv->phydev, MII_BMCR, BMCR_RESET);
+ phy_start(priv->phydev);
+
+ return 0;
+}
+
+static void mpc52xx_fec_phy_stop(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+
+ if (!priv->has_phy)
+ return;
+
+ phy_disconnect(priv->phydev);
+ /* power down phy */
+ phy_stop(priv->phydev);
+ phy_write(priv->phydev, MII_BMCR, BMCR_PDOWN);
+}
+
+static int mpc52xx_fec_phy_mii_ioctl(struct mpc52xx_fec_priv *priv,
+ struct mii_ioctl_data *mii_data, int cmd)
+{
+ if (!priv->has_phy)
+ return -ENOTSUPP;
+
+ return phy_mii_ioctl(priv->phydev, mii_data, cmd);
+}
+
+static void mpc52xx_fec_phy_hw_init(struct mpc52xx_fec_priv *priv)
+{
+ struct mpc52xx_fec __iomem *fec = priv->fec;
+
+ if (!priv->has_phy)
+ return;
+
+ out_be32(&fec->mii_speed, priv->phy_speed);
+}
+
+static int mpc52xx_fec_open(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ int err = -EBUSY;
+
+ if (request_irq(dev->irq, &mpc52xx_fec_interrupt, IRQF_SHARED,
+ DRIVER_NAME "_ctrl", dev)) {
+ dev_err(&dev->dev, "ctrl interrupt request failed\n");
+ goto out;
+ }
+ if (request_irq(priv->r_irq, &mpc52xx_fec_rx_interrupt, 0,
+ DRIVER_NAME "_rx", dev)) {
+ dev_err(&dev->dev, "rx interrupt request failed\n");
+ goto free_ctrl_irq;
+ }
+ if (request_irq(priv->t_irq, &mpc52xx_fec_tx_interrupt, 0,
+ DRIVER_NAME "_tx", dev)) {
+ dev_err(&dev->dev, "tx interrupt request failed\n");
+ goto free_2irqs;
+ }
+
+ bcom_fec_rx_reset(priv->rx_dmatsk);
+ bcom_fec_tx_reset(priv->tx_dmatsk);
+
+ err = mpc52xx_fec_alloc_rx_buffers(dev, priv->rx_dmatsk);
+ if (err) {
+ dev_err(&dev->dev, "mpc52xx_fec_alloc_rx_buffers failed\n");
+ goto free_irqs;
+ }
+
+ err = mpc52xx_fec_phy_start(dev);
+ if (err)
+ goto free_skbs;
+
+ bcom_enable(priv->rx_dmatsk);
+ bcom_enable(priv->tx_dmatsk);
+
+ mpc52xx_fec_start(dev);
+
+ netif_start_queue(dev);
+
+ return 0;
+
+ free_skbs:
+ mpc52xx_fec_free_rx_buffers(dev, priv->rx_dmatsk);
+
+ free_irqs:
+ free_irq(priv->t_irq, dev);
+ free_2irqs:
+ free_irq(priv->r_irq, dev);
+ free_ctrl_irq:
+ free_irq(dev->irq, dev);
+ out:
+
+ return err;
+}
+
+static int mpc52xx_fec_close(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+
+ mpc52xx_fec_stop(dev);
+
+ mpc52xx_fec_free_rx_buffers(dev, priv->rx_dmatsk);
+
+ free_irq(dev->irq, dev);
+ free_irq(priv->r_irq, dev);
+ free_irq(priv->t_irq, dev);
+
+ mpc52xx_fec_phy_stop(dev);
+
+ return 0;
+}
+
+/* This will only be invoked if your driver is _not_ in XOFF state.
+ * What this means is that you need not check it, and that this
+ * invariant will hold if you make sure that the netif_*_queue()
+ * calls are done at the proper times.
+ */
+static int mpc52xx_fec_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ struct bcom_fec_bd *bd;
+
+ if (bcom_queue_full(priv->tx_dmatsk)) {
+ if (net_ratelimit())
+ dev_err(&dev->dev, "transmit queue overrun\n");
+ return 1;
+ }
+
+ spin_lock_irq(&priv->lock);
+ dev->trans_start = jiffies;
+
+ bd = (struct bcom_fec_bd *)
+ bcom_prepare_next_buffer(priv->tx_dmatsk);
+
+ bd->status = skb->len | BCOM_FEC_TX_BD_TFD | BCOM_FEC_TX_BD_TC;
+ bd->skb_pa = dma_map_single(&dev->dev, skb->data, skb->len, DMA_TO_DEVICE);
+
+ bcom_submit_next_buffer(priv->tx_dmatsk, skb);
+
+ if (bcom_queue_full(priv->tx_dmatsk)) {
+ netif_stop_queue(dev);
+ }
+
+ spin_unlock_irq(&priv->lock);
+
+ return 0;
+}
+
+/* This handles BestComm transmit task interrupts
+ */
+static irqreturn_t mpc52xx_fec_tx_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+
+ spin_lock(&priv->lock);
+
+ while (bcom_buffer_done(priv->tx_dmatsk)) {
+ struct sk_buff *skb;
+ struct bcom_fec_bd *bd;
+ skb = bcom_retrieve_buffer(priv->tx_dmatsk, NULL,
+ (struct bcom_bd **)&bd);
+ dma_unmap_single(&dev->dev, bd->skb_pa, skb->len, DMA_TO_DEVICE);
+
+ dev_kfree_skb_irq(skb);
+ }
+
+ netif_wake_queue(dev);
+
+ spin_unlock(&priv->lock);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mpc52xx_fec_rx_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+
+ while (bcom_buffer_done(priv->rx_dmatsk)) {
+ struct sk_buff *skb;
+ struct sk_buff *rskb;
+ struct bcom_fec_bd *bd;
+ u32 status;
+
+ rskb = bcom_retrieve_buffer(priv->rx_dmatsk, &status,
+ (struct bcom_bd **)&bd);
+ dma_unmap_single(&dev->dev, bd->skb_pa, skb->len, DMA_FROM_DEVICE);
+
+ /* Test for errors in received frame */
+ if (status & BCOM_FEC_RX_BD_ERRORS) {
+ /* Drop packet and reuse the buffer */
+ bd = (struct bcom_fec_bd *)
+ bcom_prepare_next_buffer(priv->rx_dmatsk);
+
+ bd->status = FEC_RX_BUFFER_SIZE;
+ bd->skb_pa = dma_map_single(&dev->dev, rskb->data,
+ FEC_RX_BUFFER_SIZE, DMA_FROM_DEVICE);
+
+ bcom_submit_next_buffer(priv->rx_dmatsk, rskb);
+
+ dev->stats.rx_dropped++;
+
+ continue;
+ }
+
+ /* skbs are allocated on open, so now we allocate a new one,
+ * and remove the old (with the packet) */
+ skb = dev_alloc_skb(FEC_RX_BUFFER_SIZE);
+ if (skb) {
+ /* Process the received skb */
+ int length = status & BCOM_FEC_RX_BD_LEN_MASK;
+
+ skb_put(rskb, length - 4); /* length without CRC32 */
+
+ rskb->dev = dev;
+ rskb->protocol = eth_type_trans(rskb, dev);
+
+ netif_rx(rskb);
+ dev->last_rx = jiffies;
+ } else {
+ /* Can't get a new one : reuse the same & drop pkt */
+ dev_notice(&dev->dev, "Memory squeeze, dropping packet.\n");
+ dev->stats.rx_dropped++;
+
+ skb = rskb;
+ }
+
+ bd = (struct bcom_fec_bd *)
+ bcom_prepare_next_buffer(priv->rx_dmatsk);
+
+ bd->status = FEC_RX_BUFFER_SIZE;
+ bd->skb_pa = dma_map_single(&dev->dev, rskb->data,
+ FEC_RX_BUFFER_SIZE, DMA_FROM_DEVICE);
+
+ bcom_submit_next_buffer(priv->rx_dmatsk, skb);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mpc52xx_fec_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ struct mpc52xx_fec __iomem *fec = priv->fec;
+ u32 ievent;
+
+ ievent = in_be32(&fec->ievent);
+
+ ievent &= ~FEC_IEVENT_MII; /* mii is handled separately */
+ if (!ievent)
+ return IRQ_NONE;
+
+ out_be32(&fec->ievent, ievent); /* clear pending events */
+
+ if (ievent & ~(FEC_IEVENT_RFIFO_ERROR | FEC_IEVENT_XFIFO_ERROR)) {
+ if (ievent & ~FEC_IEVENT_TFINT)
+ dev_dbg(&dev->dev, "ievent: %08x\n", ievent);
+ return IRQ_HANDLED;
+ }
+
+ if (net_ratelimit() && (ievent & FEC_IEVENT_RFIFO_ERROR))
+ dev_warn(&dev->dev, "FEC_IEVENT_RFIFO_ERROR\n");
+ if (net_ratelimit() && (ievent & FEC_IEVENT_XFIFO_ERROR))
+ dev_warn(&dev->dev, "FEC_IEVENT_XFIFO_ERROR\n");
+
+ mpc52xx_fec_reset(dev);
+
+ netif_wake_queue(dev);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Get the current statistics.
+ * This may be called with the card open or closed.
+ */
+static struct net_device_stats *mpc52xx_fec_get_stats(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &dev->stats;
+ struct mpc52xx_fec __iomem *fec = priv->fec;
+
+ stats->rx_bytes = in_be32(&fec->rmon_r_octets);
+ stats->rx_packets = in_be32(&fec->rmon_r_packets);
+ stats->rx_errors = in_be32(&fec->rmon_r_crc_align) +
+ in_be32(&fec->rmon_r_undersize) +
+ in_be32(&fec->rmon_r_oversize) +
+ in_be32(&fec->rmon_r_frag) +
+ in_be32(&fec->rmon_r_jab);
+
+ stats->tx_bytes = in_be32(&fec->rmon_t_octets);
+ stats->tx_packets = in_be32(&fec->rmon_t_packets);
+ stats->tx_errors = in_be32(&fec->rmon_t_crc_align) +
+ in_be32(&fec->rmon_t_undersize) +
+ in_be32(&fec->rmon_t_oversize) +
+ in_be32(&fec->rmon_t_frag) +
+ in_be32(&fec->rmon_t_jab);
+
+ stats->multicast = in_be32(&fec->rmon_r_mc_pkt);
+ stats->collisions = in_be32(&fec->rmon_t_col);
+
+ /* detailed rx_errors: */
+ stats->rx_length_errors = in_be32(&fec->rmon_r_undersize)
+ + in_be32(&fec->rmon_r_oversize)
+ + in_be32(&fec->rmon_r_frag)
+ + in_be32(&fec->rmon_r_jab);
+ stats->rx_over_errors = in_be32(&fec->r_macerr);
+ stats->rx_crc_errors = in_be32(&fec->ieee_r_crc);
+ stats->rx_frame_errors = in_be32(&fec->ieee_r_align);
+ stats->rx_fifo_errors = in_be32(&fec->rmon_r_drop);
+ stats->rx_missed_errors = in_be32(&fec->rmon_r_drop);
+
+ /* detailed tx_errors: */
+ stats->tx_aborted_errors = 0;
+ stats->tx_carrier_errors = in_be32(&fec->ieee_t_cserr);
+ stats->tx_fifo_errors = in_be32(&fec->rmon_t_drop);
+ stats->tx_heartbeat_errors = in_be32(&fec->ieee_t_sqe);
+ stats->tx_window_errors = in_be32(&fec->ieee_t_lcol);
+
+ return stats;
+}
+
+/*
+ * Read MIB counters in order to reset them,
+ * then zero all the stats fields in memory
+ */
+static void mpc52xx_fec_reset_stats(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ struct mpc52xx_fec __iomem *fec = priv->fec;
+
+ out_be32(&fec->mib_control, FEC_MIB_DISABLE);
+ memset_io(&fec->rmon_t_drop, 0, (__force u32)&fec->reserved10 -
+ (__force u32)&fec->rmon_t_drop);
+ out_be32(&fec->mib_control, 0);
+
+ memset(&dev->stats, 0, sizeof(dev->stats));
+}
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ */
+static void mpc52xx_fec_set_multicast_list(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ struct mpc52xx_fec __iomem *fec = priv->fec;
+ u32 rx_control;
+
+ rx_control = in_be32(&fec->r_cntrl);
+
+ if (dev->flags & IFF_PROMISC) {
+ rx_control |= FEC_RCNTRL_PROM;
+ out_be32(&fec->r_cntrl, rx_control);
+ } else {
+ rx_control &= ~FEC_RCNTRL_PROM;
+ out_be32(&fec->r_cntrl, rx_control);
+
+ if (dev->flags & IFF_ALLMULTI) {
+ out_be32(&fec->gaddr1, 0xffffffff);
+ out_be32(&fec->gaddr2, 0xffffffff);
+ } else {
+ u32 crc;
+ int i;
+ struct dev_mc_list *dmi;
+ u32 gaddr1 = 0x00000000;
+ u32 gaddr2 = 0x00000000;
+
+ dmi = dev->mc_list;
+ for (i=0; i<dev->mc_count; i++) {
+ crc = ether_crc_le(6, dmi->dmi_addr) >> 26;
+ if (crc >= 32)
+ gaddr1 |= 1 << (crc-32);
+ else
+ gaddr2 |= 1 << crc;
+ dmi = dmi->next;
+ }
+ out_be32(&fec->gaddr1, gaddr1);
+ out_be32(&fec->gaddr2, gaddr2);
+ }
+ }
+}
+
+/**
+ * mpc52xx_fec_hw_init
+ * @dev: network device
+ *
+ * Setup various hardware setting, only needed once on start
+ */
+static void mpc52xx_fec_hw_init(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ struct mpc52xx_fec __iomem *fec = priv->fec;
+ int i;
+
+ /* Whack a reset. We should wait for this. */
+ out_be32(&fec->ecntrl, FEC_ECNTRL_RESET);
+ for (i = 0; i < FEC_RESET_DELAY; ++i) {
+ if ((in_be32(&fec->ecntrl) & FEC_ECNTRL_RESET) == 0)
+ break;
+ udelay(1);
+ }
+ if (i == FEC_RESET_DELAY)
+ dev_err(&dev->dev, "FEC Reset timeout!\n");
+
+ /* set pause to 0x20 frames */
+ out_be32(&fec->op_pause, FEC_OP_PAUSE_OPCODE | 0x20);
+
+ /* high service request will be deasserted when there's < 7 bytes in fifo
+ * low service request will be deasserted when there's < 4*7 bytes in fifo
+ */
+ out_be32(&fec->rfifo_cntrl, FEC_FIFO_CNTRL_FRAME | FEC_FIFO_CNTRL_LTG_7);
+ out_be32(&fec->tfifo_cntrl, FEC_FIFO_CNTRL_FRAME | FEC_FIFO_CNTRL_LTG_7);
+
+ /* alarm when <= x bytes in FIFO */
+ out_be32(&fec->rfifo_alarm, 0x0000030c);
+ out_be32(&fec->tfifo_alarm, 0x00000100);
+
+ /* begin transmittion when 256 bytes are in FIFO (or EOF or FIFO full) */
+ out_be32(&fec->x_wmrk, FEC_FIFO_WMRK_256B);
+
+ /* enable crc generation */
+ out_be32(&fec->xmit_fsm, FEC_XMIT_FSM_APPEND_CRC | FEC_XMIT_FSM_ENABLE_CRC);
+ out_be32(&fec->iaddr1, 0x00000000); /* No individual filter */
+ out_be32(&fec->iaddr2, 0x00000000); /* No individual filter */
+
+ /* set phy speed.
+ * this can't be done in phy driver, since it needs to be called
+ * before fec stuff (even on resume) */
+ mpc52xx_fec_phy_hw_init(priv);
+}
+
+/**
+ * mpc52xx_fec_start
+ * @dev: network device
+ *
+ * This function is called to start or restart the FEC during a link
+ * change. This happens on fifo errors or when switching between half
+ * and full duplex.
+ */
+static void mpc52xx_fec_start(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ struct mpc52xx_fec __iomem *fec = priv->fec;
+ u32 rcntrl;
+ u32 tcntrl;
+ u32 tmp;
+
+ /* clear sticky error bits */
+ tmp = FEC_FIFO_STATUS_ERR | FEC_FIFO_STATUS_UF | FEC_FIFO_STATUS_OF;
+ out_be32(&fec->rfifo_status, in_be32(&fec->rfifo_status) & tmp);
+ out_be32(&fec->tfifo_status, in_be32(&fec->tfifo_status) & tmp);
+
+ /* FIFOs will reset on mpc52xx_fec_enable */
+ out_be32(&fec->reset_cntrl, FEC_RESET_CNTRL_ENABLE_IS_RESET);
+
+ /* Set station address. */
+ mpc52xx_fec_set_paddr(dev, dev->dev_addr);
+
+ mpc52xx_fec_set_multicast_list(dev);
+
+ /* set max frame len, enable flow control, select mii mode */
+ rcntrl = FEC_RX_BUFFER_SIZE << 16; /* max frame length */
+ rcntrl |= FEC_RCNTRL_FCE;
+
+ if (priv->has_phy)
+ rcntrl |= FEC_RCNTRL_MII_MODE;
+
+ if (priv->duplex == DUPLEX_FULL)
+ tcntrl = FEC_TCNTRL_FDEN; /* FD enable */
+ else {
+ rcntrl |= FEC_RCNTRL_DRT; /* disable Rx on Tx (HD) */
+ tcntrl = 0;
+ }
+ out_be32(&fec->r_cntrl, rcntrl);
+ out_be32(&fec->x_cntrl, tcntrl);
+
+ /* Clear any outstanding interrupt. */
+ out_be32(&fec->ievent, 0xffffffff);
+
+ /* Enable interrupts we wish to service. */
+ out_be32(&fec->imask, FEC_IMASK_ENABLE);
+
+ /* And last, enable the transmit and receive processing. */
+ out_be32(&fec->ecntrl, FEC_ECNTRL_ETHER_EN);
+ out_be32(&fec->r_des_active, 0x01000000);
+}
+
+/**
+ * mpc52xx_fec_stop
+ * @dev: network device
+ *
+ * stop all activity on fec and empty dma buffers
+ */
+static void mpc52xx_fec_stop(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ struct mpc52xx_fec __iomem *fec = priv->fec;
+ unsigned long timeout;
+
+ /* disable all interrupts */
+ out_be32(&fec->imask, 0);
+
+ /* Disable the rx task. */
+ bcom_disable(priv->rx_dmatsk);
+
+ /* Wait for tx queue to drain, but only if we're in process context */
+ if (!in_interrupt()) {
+ timeout = jiffies + msecs_to_jiffies(2000);
+ while (time_before(jiffies, timeout) &&
+ !bcom_queue_empty(priv->tx_dmatsk))
+ msleep(100);
+
+ if (time_after_eq(jiffies, timeout))
+ dev_err(&dev->dev, "queues didn't drain\n");
+#if 1
+ if (time_after_eq(jiffies, timeout)) {
+ dev_err(&dev->dev, " tx: index: %i, outdex: %i\n",
+ priv->tx_dmatsk->index,
+ priv->tx_dmatsk->outdex);
+ dev_err(&dev->dev, " rx: index: %i, outdex: %i\n",
+ priv->rx_dmatsk->index,
+ priv->rx_dmatsk->outdex);
+ }
+#endif
+ }
+
+ bcom_disable(priv->tx_dmatsk);
+
+ /* Stop FEC */
+ out_be32(&fec->ecntrl, in_be32(&fec->ecntrl) & ~FEC_ECNTRL_ETHER_EN);
+
+ return;
+}
+
+/* reset fec and bestcomm tasks */
+static void mpc52xx_fec_reset(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ struct mpc52xx_fec __iomem *fec = priv->fec;
+
+ mpc52xx_fec_stop(dev);
+
+ out_be32(&fec->rfifo_status, in_be32(&fec->rfifo_status));
+ out_be32(&fec->reset_cntrl, FEC_RESET_CNTRL_RESET_FIFO);
+
+ mpc52xx_fec_free_rx_buffers(dev, priv->rx_dmatsk);
+
+ mpc52xx_fec_hw_init(dev);
+
+ phy_stop(priv->phydev);
+ phy_write(priv->phydev, MII_BMCR, BMCR_RESET);
+ phy_start(priv->phydev);
+
+ bcom_fec_rx_reset(priv->rx_dmatsk);
+ bcom_fec_tx_reset(priv->tx_dmatsk);
+
+ mpc52xx_fec_alloc_rx_buffers(dev, priv->rx_dmatsk);
+
+ bcom_enable(priv->rx_dmatsk);
+ bcom_enable(priv->tx_dmatsk);
+
+ mpc52xx_fec_start(dev);
+}
+
+
+/* ethtool interface */
+static void mpc52xx_fec_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRIVER_NAME);
+}
+
+static int mpc52xx_fec_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ return phy_ethtool_gset(priv->phydev, cmd);
+}
+
+static int mpc52xx_fec_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ return phy_ethtool_sset(priv->phydev, cmd);
+}
+
+static u32 mpc52xx_fec_get_msglevel(struct net_device *dev)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ return priv->msg_enable;
+}
+
+static void mpc52xx_fec_set_msglevel(struct net_device *dev, u32 level)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+ priv->msg_enable = level;
+}
+
+static const struct ethtool_ops mpc52xx_fec_ethtool_ops = {
+ .get_drvinfo = mpc52xx_fec_get_drvinfo,
+ .get_settings = mpc52xx_fec_get_settings,
+ .set_settings = mpc52xx_fec_set_settings,
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = mpc52xx_fec_get_msglevel,
+ .set_msglevel = mpc52xx_fec_set_msglevel,
+};
+
+
+static int mpc52xx_fec_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct mpc52xx_fec_priv *priv = netdev_priv(dev);
+
+ return mpc52xx_fec_phy_mii_ioctl(priv, if_mii(rq), cmd);
+}
+
+/* ======================================================================== */
+/* OF Driver */
+/* ======================================================================== */
+
+static int __devinit
+mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
+{
+ int rv;
+ struct net_device *ndev;
+ struct mpc52xx_fec_priv *priv = NULL;
+ struct resource mem;
+ const phandle *ph;
+
+ phys_addr_t rx_fifo;
+ phys_addr_t tx_fifo;
+
+ /* Get the ether ndev & it's private zone */
+ ndev = alloc_etherdev(sizeof(struct mpc52xx_fec_priv));
+ if (!ndev)
+ return -ENOMEM;
+
+ priv = netdev_priv(ndev);
+
+ /* Reserve FEC control zone */
+ rv = of_address_to_resource(op->node, 0, &mem);
+ if (rv) {
+ printk(KERN_ERR DRIVER_NAME ": "
+ "Error while parsing device node resource\n" );
+ return rv;
+ }
+ if ((mem.end - mem.start + 1) < sizeof(struct mpc52xx_fec)) {
+ printk(KERN_ERR DRIVER_NAME
+ " - invalid resource size (%lx < %x), check mpc52xx_devices.c\n",
+ (unsigned long)(mem.end - mem.start + 1), sizeof(struct mpc52xx_fec));
+ return -EINVAL;
+ }
+
+ if (!request_mem_region(mem.start, sizeof(struct mpc52xx_fec), DRIVER_NAME))
+ return -EBUSY;
+
+ /* Init ether ndev with what we have */
+ ndev->open = mpc52xx_fec_open;
+ ndev->stop = mpc52xx_fec_close;
+ ndev->hard_start_xmit = mpc52xx_fec_hard_start_xmit;
+ ndev->do_ioctl = mpc52xx_fec_ioctl;
+ ndev->ethtool_ops = &mpc52xx_fec_ethtool_ops;
+ ndev->get_stats = mpc52xx_fec_get_stats;
+ ndev->set_mac_address = mpc52xx_fec_set_mac_address;
+ ndev->set_multicast_list = mpc52xx_fec_set_multicast_list;
+ ndev->tx_timeout = mpc52xx_fec_tx_timeout;
+ ndev->watchdog_timeo = FEC_WATCHDOG_TIMEOUT;
+ ndev->base_addr = mem.start;
+
+ priv->t_irq = priv->r_irq = ndev->irq = NO_IRQ; /* IRQ are free for now */
+
+ spin_lock_init(&priv->lock);
+
+ /* ioremap the zones */
+ priv->fec = ioremap(mem.start, sizeof(struct mpc52xx_fec));
+
+ if (!priv->fec) {
+ rv = -ENOMEM;
+ goto probe_error;
+ }
+
+ /* Bestcomm init */
+ rx_fifo = ndev->base_addr + offsetof(struct mpc52xx_fec, rfifo_data);
+ tx_fifo = ndev->base_addr + offsetof(struct mpc52xx_fec, tfifo_data);
+
+ priv->rx_dmatsk = bcom_fec_rx_init(FEC_RX_NUM_BD, rx_fifo, FEC_RX_BUFFER_SIZE);
+ priv->tx_dmatsk = bcom_fec_tx_init(FEC_TX_NUM_BD, tx_fifo);
+
+ if (!priv->rx_dmatsk || !priv->tx_dmatsk) {
+ printk(KERN_ERR DRIVER_NAME ": Can not init SDMA tasks\n" );
+ rv = -ENOMEM;
+ goto probe_error;
+ }
+
+ /* Get the IRQ we need one by one */
+ /* Control */
+ ndev->irq = irq_of_parse_and_map(op->node, 0);
+
+ /* RX */
+ priv->r_irq = bcom_get_task_irq(priv->rx_dmatsk);
+
+ /* TX */
+ priv->t_irq = bcom_get_task_irq(priv->tx_dmatsk);
+
+ /* MAC address init */
+ if (!is_zero_ether_addr(mpc52xx_fec_mac_addr))
+ memcpy(ndev->dev_addr, mpc52xx_fec_mac_addr, 6);
+ else
+ mpc52xx_fec_get_paddr(ndev, ndev->dev_addr);
+
+ priv->msg_enable = netif_msg_init(debug, MPC52xx_MESSAGES_DEFAULT);
+ priv->duplex = DUPLEX_FULL;
+
+ /* is the phy present in device tree? */
+ ph = of_get_property(op->node, "phy-handle", NULL);
+ if (ph) {
+ const unsigned int *prop;
+ struct device_node *phy_dn;
+ priv->has_phy = 1;
+
+ phy_dn = of_find_node_by_phandle(*ph);
+ prop = of_get_property(phy_dn, "reg", NULL);
+ priv->phy_addr = *prop;
+
+ of_node_put(phy_dn);
+
+ /* Phy speed */
+ priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
+ } else {
+ dev_info(&ndev->dev, "can't find \"phy-handle\" in device"
+ " tree, using 7-wire mode\n");
+ }
+
+ /* Hardware init */
+ mpc52xx_fec_hw_init(ndev);
+
+ mpc52xx_fec_reset_stats(ndev);
+
+ /* Register the new network device */
+ rv = register_netdev(ndev);
+ if (rv < 0)
+ goto probe_error;
+
+ /* We're done ! */
+ dev_set_drvdata(&op->dev, ndev);
+
+ return 0;
+
+
+ /* Error handling - free everything that might be allocated */
+probe_error:
+
+ irq_dispose_mapping(ndev->irq);
+
+ if (priv->rx_dmatsk)
+ bcom_fec_rx_release(priv->rx_dmatsk);
+ if (priv->tx_dmatsk)
+ bcom_fec_tx_release(priv->tx_dmatsk);
+
+ if (priv->fec)
+ iounmap(priv->fec);
+
+ release_mem_region(mem.start, sizeof(struct mpc52xx_fec));
+
+ free_netdev(ndev);
+
+ return rv;
+}
+
+static int
+mpc52xx_fec_remove(struct of_device *op)
+{
+ struct net_device *ndev;
+ struct mpc52xx_fec_priv *priv;
+
+ ndev = dev_get_drvdata(&op->dev);
+ priv = netdev_priv(ndev);
+
+ unregister_netdev(ndev);
+
+ irq_dispose_mapping(ndev->irq);
+
+ bcom_fec_rx_release(priv->rx_dmatsk);
+ bcom_fec_tx_release(priv->tx_dmatsk);
+
+ iounmap(priv->fec);
+
+ release_mem_region(ndev->base_addr, sizeof(struct mpc52xx_fec));
+
+ free_netdev(ndev);
+
+ dev_set_drvdata(&op->dev, NULL);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int mpc52xx_fec_of_suspend(struct of_device *op, pm_message_t state)
+{
+ struct net_device *dev = dev_get_drvdata(&op->dev);
+
+ if (netif_running(dev))
+ mpc52xx_fec_close(dev);
+
+ return 0;
+}
+
+static int mpc52xx_fec_of_resume(struct of_device *op)
+{
+ struct net_device *dev = dev_get_drvdata(&op->dev);
+
+ mpc52xx_fec_hw_init(dev);
+ mpc52xx_fec_reset_stats(dev);
+
+ if (netif_running(dev))
+ mpc52xx_fec_open(dev);
+
+ return 0;
+}
+#endif
+
+static struct of_device_id mpc52xx_fec_match[] = {
+ {
+ .type = "network",
+ .compatible = "mpc5200-fec",
+ },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, mpc52xx_fec_match);
+
+static struct of_platform_driver mpc52xx_fec_driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ .match_table = mpc52xx_fec_match,
+ .probe = mpc52xx_fec_probe,
+ .remove = mpc52xx_fec_remove,
+#ifdef CONFIG_PM
+ .suspend = mpc52xx_fec_of_suspend,
+ .resume = mpc52xx_fec_of_resume,
+#endif
+};
+
+
+/* ======================================================================== */
+/* Module */
+/* ======================================================================== */
+
+static int __init
+mpc52xx_fec_init(void)
+{
+#ifdef CONFIG_FEC_MPC52xx_MDIO
+ int ret;
+ ret = of_register_platform_driver(&mpc52xx_fec_mdio_driver);
+ if (ret) {
+ printk(KERN_ERR DRIVER_NAME ": failed to register mdio driver\n");
+ return ret;
+ }
+#endif
+ return of_register_platform_driver(&mpc52xx_fec_driver);
+}
+
+static void __exit
+mpc52xx_fec_exit(void)
+{
+ of_unregister_platform_driver(&mpc52xx_fec_driver);
+#ifdef CONFIG_FEC_MPC52xx_MDIO
+ of_unregister_platform_driver(&mpc52xx_fec_mdio_driver);
+#endif
+}
+
+
+module_init(mpc52xx_fec_init);
+module_exit(mpc52xx_fec_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dale Farnsworth");
+MODULE_DESCRIPTION("Ethernet driver for the Freescale MPC52xx FEC");
diff --git a/drivers/net/fec_mpc52xx.h b/drivers/net/fec_mpc52xx.h
new file mode 100644
index 0000000..8b1f753
--- /dev/null
+++ b/drivers/net/fec_mpc52xx.h
@@ -0,0 +1,313 @@
+/*
+ * drivers/drivers/net/fec_mpc52xx/fec.h
+ *
+ * Driver for the MPC5200 Fast Ethernet Controller
+ *
+ * Author: Dale Farnsworth <dfarnsworth@mvista.com>
+ *
+ * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __DRIVERS_NET_MPC52XX_FEC_H__
+#define __DRIVERS_NET_MPC52XX_FEC_H__
+
+#include <linux/phy.h>
+
+/* Tunable constant */
+/* FEC_RX_BUFFER_SIZE includes 4 bytes for CRC32 */
+#define FEC_RX_BUFFER_SIZE 1522 /* max receive packet size */
+#define FEC_RX_NUM_BD 256
+#define FEC_TX_NUM_BD 64
+
+#define FEC_RESET_DELAY 50 /* uS */
+
+#define FEC_WATCHDOG_TIMEOUT ((400*HZ)/1000)
+
+struct mpc52xx_fec_priv {
+ int duplex;
+ int r_irq;
+ int t_irq;
+ struct mpc52xx_fec __iomem *fec;
+ struct bcom_task *rx_dmatsk;
+ struct bcom_task *tx_dmatsk;
+ spinlock_t lock;
+ int msg_enable;
+
+ int has_phy;
+ unsigned int phy_speed;
+ unsigned int phy_addr;
+ struct phy_device *phydev;
+ enum phy_state link;
+ int speed;
+};
+
+
+/* ======================================================================== */
+/* Hardware register sets & bits */
+/* ======================================================================== */
+
+struct mpc52xx_fec {
+ u32 fec_id; /* FEC + 0x000 */
+ u32 ievent; /* FEC + 0x004 */
+ u32 imask; /* FEC + 0x008 */
+
+ u32 reserved0[1]; /* FEC + 0x00C */
+ u32 r_des_active; /* FEC + 0x010 */
+ u32 x_des_active; /* FEC + 0x014 */
+ u32 r_des_active_cl; /* FEC + 0x018 */
+ u32 x_des_active_cl; /* FEC + 0x01C */
+ u32 ivent_set; /* FEC + 0x020 */
+ u32 ecntrl; /* FEC + 0x024 */
+
+ u32 reserved1[6]; /* FEC + 0x028-03C */
+ u32 mii_data; /* FEC + 0x040 */
+ u32 mii_speed; /* FEC + 0x044 */
+ u32 mii_status; /* FEC + 0x048 */
+
+ u32 reserved2[5]; /* FEC + 0x04C-05C */
+ u32 mib_data; /* FEC + 0x060 */
+ u32 mib_control; /* FEC + 0x064 */
+
+ u32 reserved3[6]; /* FEC + 0x068-7C */
+ u32 r_activate; /* FEC + 0x080 */
+ u32 r_cntrl; /* FEC + 0x084 */
+ u32 r_hash; /* FEC + 0x088 */
+ u32 r_data; /* FEC + 0x08C */
+ u32 ar_done; /* FEC + 0x090 */
+ u32 r_test; /* FEC + 0x094 */
+ u32 r_mib; /* FEC + 0x098 */
+ u32 r_da_low; /* FEC + 0x09C */
+ u32 r_da_high; /* FEC + 0x0A0 */
+
+ u32 reserved4[7]; /* FEC + 0x0A4-0BC */
+ u32 x_activate; /* FEC + 0x0C0 */
+ u32 x_cntrl; /* FEC + 0x0C4 */
+ u32 backoff; /* FEC + 0x0C8 */
+ u32 x_data; /* FEC + 0x0CC */
+ u32 x_status; /* FEC + 0x0D0 */
+ u32 x_mib; /* FEC + 0x0D4 */
+ u32 x_test; /* FEC + 0x0D8 */
+ u32 fdxfc_da1; /* FEC + 0x0DC */
+ u32 fdxfc_da2; /* FEC + 0x0E0 */
+ u32 paddr1; /* FEC + 0x0E4 */
+ u32 paddr2; /* FEC + 0x0E8 */
+ u32 op_pause; /* FEC + 0x0EC */
+
+ u32 reserved5[4]; /* FEC + 0x0F0-0FC */
+ u32 instr_reg; /* FEC + 0x100 */
+ u32 context_reg; /* FEC + 0x104 */
+ u32 test_cntrl; /* FEC + 0x108 */
+ u32 acc_reg; /* FEC + 0x10C */
+ u32 ones; /* FEC + 0x110 */
+ u32 zeros; /* FEC + 0x114 */
+ u32 iaddr1; /* FEC + 0x118 */
+ u32 iaddr2; /* FEC + 0x11C */
+ u32 gaddr1; /* FEC + 0x120 */
+ u32 gaddr2; /* FEC + 0x124 */
+ u32 random; /* FEC + 0x128 */
+ u32 rand1; /* FEC + 0x12C */
+ u32 tmp; /* FEC + 0x130 */
+
+ u32 reserved6[3]; /* FEC + 0x134-13C */
+ u32 fifo_id; /* FEC + 0x140 */
+ u32 x_wmrk; /* FEC + 0x144 */
+ u32 fcntrl; /* FEC + 0x148 */
+ u32 r_bound; /* FEC + 0x14C */
+ u32 r_fstart; /* FEC + 0x150 */
+ u32 r_count; /* FEC + 0x154 */
+ u32 r_lag; /* FEC + 0x158 */
+ u32 r_read; /* FEC + 0x15C */
+ u32 r_write; /* FEC + 0x160 */
+ u32 x_count; /* FEC + 0x164 */
+ u32 x_lag; /* FEC + 0x168 */
+ u32 x_retry; /* FEC + 0x16C */
+ u32 x_write; /* FEC + 0x170 */
+ u32 x_read; /* FEC + 0x174 */
+
+ u32 reserved7[2]; /* FEC + 0x178-17C */
+ u32 fm_cntrl; /* FEC + 0x180 */
+ u32 rfifo_data; /* FEC + 0x184 */
+ u32 rfifo_status; /* FEC + 0x188 */
+ u32 rfifo_cntrl; /* FEC + 0x18C */
+ u32 rfifo_lrf_ptr; /* FEC + 0x190 */
+ u32 rfifo_lwf_ptr; /* FEC + 0x194 */
+ u32 rfifo_alarm; /* FEC + 0x198 */
+ u32 rfifo_rdptr; /* FEC + 0x19C */
+ u32 rfifo_wrptr; /* FEC + 0x1A0 */
+ u32 tfifo_data; /* FEC + 0x1A4 */
+ u32 tfifo_status; /* FEC + 0x1A8 */
+ u32 tfifo_cntrl; /* FEC + 0x1AC */
+ u32 tfifo_lrf_ptr; /* FEC + 0x1B0 */
+ u32 tfifo_lwf_ptr; /* FEC + 0x1B4 */
+ u32 tfifo_alarm; /* FEC + 0x1B8 */
+ u32 tfifo_rdptr; /* FEC + 0x1BC */
+ u32 tfifo_wrptr; /* FEC + 0x1C0 */
+
+ u32 reset_cntrl; /* FEC + 0x1C4 */
+ u32 xmit_fsm; /* FEC + 0x1C8 */
+
+ u32 reserved8[3]; /* FEC + 0x1CC-1D4 */
+ u32 rdes_data0; /* FEC + 0x1D8 */
+ u32 rdes_data1; /* FEC + 0x1DC */
+ u32 r_length; /* FEC + 0x1E0 */
+ u32 x_length; /* FEC + 0x1E4 */
+ u32 x_addr; /* FEC + 0x1E8 */
+ u32 cdes_data; /* FEC + 0x1EC */
+ u32 status; /* FEC + 0x1F0 */
+ u32 dma_control; /* FEC + 0x1F4 */
+ u32 des_cmnd; /* FEC + 0x1F8 */
+ u32 data; /* FEC + 0x1FC */
+
+ u32 rmon_t_drop; /* FEC + 0x200 */
+ u32 rmon_t_packets; /* FEC + 0x204 */
+ u32 rmon_t_bc_pkt; /* FEC + 0x208 */
+ u32 rmon_t_mc_pkt; /* FEC + 0x20C */
+ u32 rmon_t_crc_align; /* FEC + 0x210 */
+ u32 rmon_t_undersize; /* FEC + 0x214 */
+ u32 rmon_t_oversize; /* FEC + 0x218 */
+ u32 rmon_t_frag; /* FEC + 0x21C */
+ u32 rmon_t_jab; /* FEC + 0x220 */
+ u32 rmon_t_col; /* FEC + 0x224 */
+ u32 rmon_t_p64; /* FEC + 0x228 */
+ u32 rmon_t_p65to127; /* FEC + 0x22C */
+ u32 rmon_t_p128to255; /* FEC + 0x230 */
+ u32 rmon_t_p256to511; /* FEC + 0x234 */
+ u32 rmon_t_p512to1023; /* FEC + 0x238 */
+ u32 rmon_t_p1024to2047; /* FEC + 0x23C */
+ u32 rmon_t_p_gte2048; /* FEC + 0x240 */
+ u32 rmon_t_octets; /* FEC + 0x244 */
+ u32 ieee_t_drop; /* FEC + 0x248 */
+ u32 ieee_t_frame_ok; /* FEC + 0x24C */
+ u32 ieee_t_1col; /* FEC + 0x250 */
+ u32 ieee_t_mcol; /* FEC + 0x254 */
+ u32 ieee_t_def; /* FEC + 0x258 */
+ u32 ieee_t_lcol; /* FEC + 0x25C */
+ u32 ieee_t_excol; /* FEC + 0x260 */
+ u32 ieee_t_macerr; /* FEC + 0x264 */
+ u32 ieee_t_cserr; /* FEC + 0x268 */
+ u32 ieee_t_sqe; /* FEC + 0x26C */
+ u32 t_fdxfc; /* FEC + 0x270 */
+ u32 ieee_t_octets_ok; /* FEC + 0x274 */
+
+ u32 reserved9[2]; /* FEC + 0x278-27C */
+ u32 rmon_r_drop; /* FEC + 0x280 */
+ u32 rmon_r_packets; /* FEC + 0x284 */
+ u32 rmon_r_bc_pkt; /* FEC + 0x288 */
+ u32 rmon_r_mc_pkt; /* FEC + 0x28C */
+ u32 rmon_r_crc_align; /* FEC + 0x290 */
+ u32 rmon_r_undersize; /* FEC + 0x294 */
+ u32 rmon_r_oversize; /* FEC + 0x298 */
+ u32 rmon_r_frag; /* FEC + 0x29C */
+ u32 rmon_r_jab; /* FEC + 0x2A0 */
+
+ u32 rmon_r_resvd_0; /* FEC + 0x2A4 */
+
+ u32 rmon_r_p64; /* FEC + 0x2A8 */
+ u32 rmon_r_p65to127; /* FEC + 0x2AC */
+ u32 rmon_r_p128to255; /* FEC + 0x2B0 */
+ u32 rmon_r_p256to511; /* FEC + 0x2B4 */
+ u32 rmon_r_p512to1023; /* FEC + 0x2B8 */
+ u32 rmon_r_p1024to2047; /* FEC + 0x2BC */
+ u32 rmon_r_p_gte2048; /* FEC + 0x2C0 */
+ u32 rmon_r_octets; /* FEC + 0x2C4 */
+ u32 ieee_r_drop; /* FEC + 0x2C8 */
+ u32 ieee_r_frame_ok; /* FEC + 0x2CC */
+ u32 ieee_r_crc; /* FEC + 0x2D0 */
+ u32 ieee_r_align; /* FEC + 0x2D4 */
+ u32 r_macerr; /* FEC + 0x2D8 */
+ u32 r_fdxfc; /* FEC + 0x2DC */
+ u32 ieee_r_octets_ok; /* FEC + 0x2E0 */
+
+ u32 reserved10[7]; /* FEC + 0x2E4-2FC */
+
+ u32 reserved11[64]; /* FEC + 0x300-3FF */
+};
+
+#define FEC_MIB_DISABLE 0x80000000
+
+#define FEC_IEVENT_HBERR 0x80000000
+#define FEC_IEVENT_BABR 0x40000000
+#define FEC_IEVENT_BABT 0x20000000
+#define FEC_IEVENT_GRA 0x10000000
+#define FEC_IEVENT_TFINT 0x08000000
+#define FEC_IEVENT_MII 0x00800000
+#define FEC_IEVENT_LATE_COL 0x00200000
+#define FEC_IEVENT_COL_RETRY_LIM 0x00100000
+#define FEC_IEVENT_XFIFO_UN 0x00080000
+#define FEC_IEVENT_XFIFO_ERROR 0x00040000
+#define FEC_IEVENT_RFIFO_ERROR 0x00020000
+
+#define FEC_IMASK_HBERR 0x80000000
+#define FEC_IMASK_BABR 0x40000000
+#define FEC_IMASK_BABT 0x20000000
+#define FEC_IMASK_GRA 0x10000000
+#define FEC_IMASK_MII 0x00800000
+#define FEC_IMASK_LATE_COL 0x00200000
+#define FEC_IMASK_COL_RETRY_LIM 0x00100000
+#define FEC_IMASK_XFIFO_UN 0x00080000
+#define FEC_IMASK_XFIFO_ERROR 0x00040000
+#define FEC_IMASK_RFIFO_ERROR 0x00020000
+
+/* all but MII, which is enabled separately */
+#define FEC_IMASK_ENABLE (FEC_IMASK_HBERR | FEC_IMASK_BABR | \
+ FEC_IMASK_BABT | FEC_IMASK_GRA | FEC_IMASK_LATE_COL | \
+ FEC_IMASK_COL_RETRY_LIM | FEC_IMASK_XFIFO_UN | \
+ FEC_IMASK_XFIFO_ERROR | FEC_IMASK_RFIFO_ERROR)
+
+#define FEC_RCNTRL_MAX_FL_SHIFT 16
+#define FEC_RCNTRL_LOOP 0x01
+#define FEC_RCNTRL_DRT 0x02
+#define FEC_RCNTRL_MII_MODE 0x04
+#define FEC_RCNTRL_PROM 0x08
+#define FEC_RCNTRL_BC_REJ 0x10
+#define FEC_RCNTRL_FCE 0x20
+
+#define FEC_TCNTRL_GTS 0x00000001
+#define FEC_TCNTRL_HBC 0x00000002
+#define FEC_TCNTRL_FDEN 0x00000004
+#define FEC_TCNTRL_TFC_PAUSE 0x00000008
+#define FEC_TCNTRL_RFC_PAUSE 0x00000010
+
+#define FEC_ECNTRL_RESET 0x00000001
+#define FEC_ECNTRL_ETHER_EN 0x00000002
+
+#define FEC_MII_DATA_ST 0x40000000 /* Start frame */
+#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform read */
+#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform write */
+#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address mask */
+#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register mask */
+#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */
+#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data mask */
+
+#define FEC_MII_READ_FRAME (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA)
+#define FEC_MII_WRITE_FRAME (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | FEC_MII_DATA_TA)
+
+#define FEC_MII_DATA_RA_SHIFT 0x12 /* MII reg addr bits */
+#define FEC_MII_DATA_PA_SHIFT 0x17 /* MII PHY addr bits */
+
+#define FEC_PADDR2_TYPE 0x8808
+
+#define FEC_OP_PAUSE_OPCODE 0x00010000
+
+#define FEC_FIFO_WMRK_256B 0x3
+
+#define FEC_FIFO_STATUS_ERR 0x00400000
+#define FEC_FIFO_STATUS_UF 0x00200000
+#define FEC_FIFO_STATUS_OF 0x00100000
+
+#define FEC_FIFO_CNTRL_FRAME 0x08000000
+#define FEC_FIFO_CNTRL_LTG_7 0x07000000
+
+#define FEC_RESET_CNTRL_RESET_FIFO 0x02000000
+#define FEC_RESET_CNTRL_ENABLE_IS_RESET 0x01000000
+
+#define FEC_XMIT_FSM_APPEND_CRC 0x02000000
+#define FEC_XMIT_FSM_ENABLE_CRC 0x01000000
+
+
+extern struct of_platform_driver mpc52xx_fec_mdio_driver;
+
+#endif /* __DRIVERS_NET_MPC52XX_FEC_H__ */
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c
new file mode 100644
index 0000000..ba6e8b2
--- /dev/null
+++ b/drivers/net/fec_mpc52xx_phy.c
@@ -0,0 +1,198 @@
+/*
+ * Driver for the MPC5200 Fast Ethernet Controller - MDIO bus driver
+ *
+ * Copyright (C) 2007 Domen Puncer, Telargo, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <linux/of_platform.h>
+#include <asm/io.h>
+#include <asm/mpc52xx.h>
+#include "fec_mpc52xx.h"
+
+struct mpc52xx_fec_mdio_priv {
+ struct mpc52xx_fec __iomem *regs;
+};
+
+static int mpc52xx_fec_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+ struct mpc52xx_fec_mdio_priv *priv = bus->priv;
+ struct mpc52xx_fec __iomem *fec;
+ int tries = 100;
+ u32 request = FEC_MII_READ_FRAME;
+
+ fec = priv->regs;
+ out_be32(&fec->ievent, FEC_IEVENT_MII);
+
+ request |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
+ request |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
+
+ out_be32(&priv->regs->mii_data, request);
+
+ /* wait for it to finish, this takes about 23 us on lite5200b */
+ while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries)
+ udelay(5);
+
+ if (tries == 0)
+ return -ETIMEDOUT;
+
+ return in_be32(&priv->regs->mii_data) & FEC_MII_DATA_DATAMSK;
+}
+
+static int mpc52xx_fec_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 data)
+{
+ struct mpc52xx_fec_mdio_priv *priv = bus->priv;
+ struct mpc52xx_fec __iomem *fec;
+ u32 value = data;
+ int tries = 100;
+
+ fec = priv->regs;
+ out_be32(&fec->ievent, FEC_IEVENT_MII);
+
+ value |= FEC_MII_WRITE_FRAME;
+ value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK;
+ value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK;
+
+ out_be32(&priv->regs->mii_data, value);
+
+ /* wait for request to finish */
+ while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries)
+ udelay(5);
+
+ if (tries == 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int mpc52xx_fec_mdio_probe(struct of_device *of, const struct of_device_id *match)
+{
+ struct device *dev = &of->dev;
+ struct device_node *np = of->node;
+ struct device_node *child = NULL;
+ struct mii_bus *bus;
+ struct mpc52xx_fec_mdio_priv *priv;
+ struct resource res = {};
+ int err;
+ int i;
+
+ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+ if (bus == NULL)
+ return -ENOMEM;
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (priv == NULL) {
+ err = -ENOMEM;
+ goto out_free;
+ }
+
+ bus->name = "mpc52xx MII bus";
+ bus->read = mpc52xx_fec_mdio_read;
+ bus->write = mpc52xx_fec_mdio_write;
+
+ /* setup irqs */
+ bus->irq = kmalloc(sizeof(bus->irq[0]) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (bus->irq == NULL) {
+ err = -ENOMEM;
+ goto out_free;
+ }
+ for (i=0; i<PHY_MAX_ADDR; i++)
+ bus->irq[i] = PHY_POLL;
+
+ while ((child = of_get_next_child(np, child)) != NULL) {
+ int irq = irq_of_parse_and_map(child, 0);
+ if (irq != NO_IRQ) {
+ const u32 *id = of_get_property(child, "reg", NULL);
+ bus->irq[*id] = irq;
+ }
+ }
+
+ /* setup registers */
+ err = of_address_to_resource(np, 0, &res);
+ if (err)
+ goto out_free;
+ priv->regs = ioremap(res.start, res.end - res.start + 1);
+ if (priv->regs == NULL) {
+ err = -ENOMEM;
+ goto out_free;
+ }
+
+ bus->id = res.start;
+ bus->priv = priv;
+
+ bus->dev = dev;
+ dev_set_drvdata(dev, bus);
+
+ /* set MII speed */
+ out_be32(&priv->regs->mii_speed, ((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1);
+
+ /* enable MII interrupt */
+ out_be32(&priv->regs->imask, in_be32(&priv->regs->imask) | FEC_IMASK_MII);
+
+ err = mdiobus_register(bus);
+ if (err)
+ goto out_unmap;
+
+ return 0;
+
+ out_unmap:
+ iounmap(priv->regs);
+ out_free:
+ for (i=0; i<PHY_MAX_ADDR; i++)
+ if (bus->irq[i] != PHY_POLL)
+ irq_dispose_mapping(bus->irq[i]);
+ kfree(bus->irq);
+ kfree(priv);
+ kfree(bus);
+
+ return err;
+}
+
+static int mpc52xx_fec_mdio_remove(struct of_device *of)
+{
+ struct device *dev = &of->dev;
+ struct mii_bus *bus = dev_get_drvdata(dev);
+ struct mpc52xx_fec_mdio_priv *priv = bus->priv;
+ int i;
+
+ mdiobus_unregister(bus);
+ dev_set_drvdata(dev, NULL);
+
+ iounmap(priv->regs);
+ for (i=0; i<PHY_MAX_ADDR; i++)
+ if (bus->irq[i])
+ irq_dispose_mapping(bus->irq[i]);
+ kfree(priv);
+ kfree(bus->irq);
+ kfree(bus);
+
+ return 0;
+}
+
+
+static struct of_device_id mpc52xx_fec_mdio_match[] = {
+ {
+ .type = "mdio",
+ .compatible = "mpc5200b-fec-phy",
+ },
+ {},
+};
+
+struct of_platform_driver mpc52xx_fec_mdio_driver = {
+ .name = "mpc5200b-fec-phy",
+ .probe = mpc52xx_fec_mdio_probe,
+ .remove = mpc52xx_fec_mdio_remove,
+ .match_table = mpc52xx_fec_mdio_match,
+};
+
+/* let fec driver call it, since this has to be registered before it */
+EXPORT_SYMBOL_GPL(mpc52xx_fec_mdio_driver);
+
+
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 70ddf1a..92ce2e3 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -5597,6 +5597,22 @@
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_31),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
},
+ { /* MCP77 Ethernet Controller */
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_32),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ },
+ { /* MCP77 Ethernet Controller */
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_33),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ },
+ { /* MCP77 Ethernet Controller */
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_34),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ },
+ { /* MCP77 Ethernet Controller */
+ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_35),
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ },
{0,},
};
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index 6888723..dbd23bb6 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -55,6 +55,26 @@
DrvVer);
MODULE_LICENSE("GPL");
+//variable record -- index by leading revision/length
+//Revision/Length(=N*4), Address1, Data1, Address2, Data2,...,AddressN,DataN
+static unsigned short DefaultPhyParam[] = {
+ // 11/12/03 IP1000A v1-3 rev=0x40
+ /*--------------------------------------------------------------------------
+ (0x4000|(15*4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 22, 0x85bd, 24, 0xfff2,
+ 27, 0x0c10, 28, 0x0c10, 29, 0x2c10, 31, 0x0003, 23, 0x92f6,
+ 31, 0x0000, 23, 0x003d, 30, 0x00de, 20, 0x20e7, 9, 0x0700,
+ --------------------------------------------------------------------------*/
+ // 12/17/03 IP1000A v1-4 rev=0x40
+ (0x4000 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
+ 0x0000,
+ 30, 0x005e, 9, 0x0700,
+ // 01/09/04 IP1000A v1-5 rev=0x41
+ (0x4100 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
+ 0x0000,
+ 30, 0x005e, 9, 0x0700,
+ 0x0000
+};
+
static const char *ipg_brand_name[] = {
"IC PLUS IP1000 1000/100/10 based NIC",
"Sundance Technology ST2021 based NIC",
@@ -990,7 +1010,7 @@
}
/* Provides statistical information about the IPG NIC. */
-struct net_device_stats *ipg_nic_get_stats(struct net_device *dev)
+static struct net_device_stats *ipg_nic_get_stats(struct net_device *dev)
{
struct ipg_nic_private *sp = netdev_priv(dev);
void __iomem *ioaddr = sp->ioaddr;
diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h
index e418b90..d5d092c 100644
--- a/drivers/net/ipg.h
+++ b/drivers/net/ipg.h
@@ -833,24 +833,4 @@
struct delayed_work task;
};
-//variable record -- index by leading revision/length
-//Revision/Length(=N*4), Address1, Data1, Address2, Data2,...,AddressN,DataN
-unsigned short DefaultPhyParam[] = {
- // 11/12/03 IP1000A v1-3 rev=0x40
- /*--------------------------------------------------------------------------
- (0x4000|(15*4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 22, 0x85bd, 24, 0xfff2,
- 27, 0x0c10, 28, 0x0c10, 29, 0x2c10, 31, 0x0003, 23, 0x92f6,
- 31, 0x0000, 23, 0x003d, 30, 0x00de, 20, 0x20e7, 9, 0x0700,
- --------------------------------------------------------------------------*/
- // 12/17/03 IP1000A v1-4 rev=0x40
- (0x4000 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x41
- (0x4100 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- 0x0000
-};
-
#endif /* __LINUX_IPG_H */
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index 4dbdfaa..a1e4508 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -627,19 +627,16 @@
}
-void au1k_irda_interrupt(int irq, void *dev_id)
+static irqreturn_t au1k_irda_interrupt(int dummy, void *dev_id)
{
- struct net_device *dev = (struct net_device *) dev_id;
-
- if (dev == NULL) {
- printk(KERN_ERR "%s: isr: null dev ptr\n", dev->name);
- return;
- }
+ struct net_device *dev = dev_id;
writel(0, IR_INT_CLEAR); /* ack irda interrupts */
au1k_irda_rx(dev);
au1k_tx_ack(dev);
+
+ return IRQ_HANDLED;
}
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index 1eee889..3d2e721 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -196,4 +196,11 @@
uint32_t alloc_rx_buff_failed;
boolean_t have_msi;
};
+
+/* Exported from other modules */
+extern void ixgb_check_options(struct ixgb_adapter *adapter);
+extern void ixgb_set_ethtool_ops(struct net_device *netdev);
+extern char ixgb_driver_name[];
+extern const char ixgb_driver_version[];
+
#endif /* _IXGB_H_ */
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index fddd584..a267dd8 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -32,9 +32,6 @@
#include <asm/uaccess.h>
-extern char ixgb_driver_name[];
-extern char ixgb_driver_version[];
-
extern int ixgb_up(struct ixgb_adapter *adapter);
extern void ixgb_down(struct ixgb_adapter *adapter, boolean_t kill_watchdog);
extern void ixgb_reset(struct ixgb_adapter *adapter);
@@ -639,8 +636,8 @@
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
- if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
- data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
+ if (!data)
+ data = INT_MAX;
if(!adapter->blink_timer.function) {
init_timer(&adapter->blink_timer);
diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c
index ecbf458..2c6367a 100644
--- a/drivers/net/ixgb/ixgb_hw.c
+++ b/drivers/net/ixgb/ixgb_hw.c
@@ -1174,7 +1174,7 @@
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-boolean_t
+static boolean_t
ixgb_link_reset(struct ixgb_hw *hw)
{
boolean_t link_status = FALSE;
@@ -1205,7 +1205,7 @@
*
* hw - Struct containing variables accessed by shared code
*****************************************************************************/
-void
+static void
ixgb_optics_reset(struct ixgb_hw *hw)
{
if (hw->phy_type == ixgb_phy_type_txn17401) {
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index d444de5..3021234 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -37,8 +37,8 @@
#define DRIVERNAPI "-NAPI"
#endif
#define DRV_VERSION "1.0.126-k2"DRIVERNAPI
-char ixgb_driver_version[] = DRV_VERSION;
-static char ixgb_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
+const char ixgb_driver_version[] = DRV_VERSION;
+static const char ixgb_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
/* ixgb_pci_tbl - PCI Device ID Table
*
@@ -104,7 +104,6 @@
static boolean_t ixgb_clean_rx_irq(struct ixgb_adapter *adapter);
#endif
static void ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter);
-void ixgb_set_ethtool_ops(struct net_device *netdev);
static void ixgb_tx_timeout(struct net_device *dev);
static void ixgb_tx_timeout_task(struct work_struct *work);
static void ixgb_vlan_rx_register(struct net_device *netdev,
@@ -123,9 +122,6 @@
static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev);
static void ixgb_io_resume (struct pci_dev *pdev);
-/* Exported from other modules */
-extern void ixgb_check_options(struct ixgb_adapter *adapter);
-
static struct pci_error_handlers ixgb_err_handler = {
.error_detected = ixgb_io_error_detected,
.slot_reset = ixgb_io_slot_reset,
@@ -1085,7 +1081,8 @@
rctl |= IXGB_RCTL_MPE;
IXGB_WRITE_REG(hw, RCTL, rctl);
} else {
- uint8_t mta[netdev->mc_count * IXGB_ETH_LENGTH_OF_ADDRESS];
+ uint8_t mta[IXGB_MAX_NUM_MULTICAST_ADDRESSES *
+ IXGB_ETH_LENGTH_OF_ADDRESS];
IXGB_WRITE_REG(hw, RCTL, rctl);
@@ -1324,8 +1321,8 @@
/* Workaround for premature desc write-backs
* in TSO mode. Append 4-byte sentinel desc */
- if (unlikely(mss && !nr_frags && size == len
- && size > 8))
+ if (unlikely(mss && (f == (nr_frags - 1))
+ && size == len && size > 8))
size -= 4;
buffer_info->length = size;
diff --git a/drivers/net/ixgb/ixgb_param.c b/drivers/net/ixgb/ixgb_param.c
index 5d5ddab..865d14d 100644
--- a/drivers/net/ixgb/ixgb_param.c
+++ b/drivers/net/ixgb/ixgb_param.c
@@ -44,10 +44,11 @@
*/
#define IXGB_PARAM_INIT { [0 ... IXGB_MAX_NIC] = OPTION_UNSET }
-#define IXGB_PARAM(X, desc) \
- static int __devinitdata X[IXGB_MAX_NIC+1] = IXGB_PARAM_INIT; \
- static int num_##X = 0; \
- module_param_array_named(X, X, int, &num_##X, 0); \
+#define IXGB_PARAM(X, desc) \
+ static int __devinitdata X[IXGB_MAX_NIC+1] \
+ = IXGB_PARAM_INIT; \
+ static unsigned int num_##X = 0; \
+ module_param_array_named(X, X, int, &num_##X, 0); \
MODULE_PARM_DESC(X, desc);
/* Transmit Descriptor Count
@@ -178,8 +179,8 @@
struct ixgb_option {
enum { enable_option, range_option, list_option } type;
- char *name;
- char *err;
+ const char *name;
+ const char *err;
int def;
union {
struct { /* range_option info */
@@ -197,7 +198,7 @@
};
static int __devinit
-ixgb_validate_option(int *value, struct ixgb_option *opt)
+ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
{
if(*value == OPTION_UNSET) {
*value = opt->def;
@@ -266,7 +267,7 @@
}
{ /* Transmit Descriptor Count */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Transmit Descriptors",
.err = "using default of " __MODULE_STRING(DEFAULT_TXD),
@@ -285,7 +286,7 @@
tx_ring->count = ALIGN(tx_ring->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE);
}
{ /* Receive Descriptor Count */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Receive Descriptors",
.err = "using default of " __MODULE_STRING(DEFAULT_RXD),
@@ -304,7 +305,7 @@
rx_ring->count = ALIGN(rx_ring->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE);
}
{ /* Receive Checksum Offload Enable */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = enable_option,
.name = "Receive Checksum Offload",
.err = "defaulting to Enabled",
@@ -312,7 +313,7 @@
};
if(num_XsumRX > bd) {
- int rx_csum = XsumRX[bd];
+ unsigned int rx_csum = XsumRX[bd];
ixgb_validate_option(&rx_csum, &opt);
adapter->rx_csum = rx_csum;
} else {
@@ -328,7 +329,7 @@
{ ixgb_fc_full, "Flow Control Enabled" },
{ ixgb_fc_default, "Flow Control Hardware Default" }};
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = list_option,
.name = "Flow Control",
.err = "reading default settings from EEPROM",
@@ -338,7 +339,7 @@
};
if(num_FlowControl > bd) {
- int fc = FlowControl[bd];
+ unsigned int fc = FlowControl[bd];
ixgb_validate_option(&fc, &opt);
adapter->hw.fc.type = fc;
} else {
@@ -346,7 +347,7 @@
}
}
{ /* Receive Flow Control High Threshold */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Rx Flow Control High Threshold",
.err = "using default of " __MODULE_STRING(DEFAULT_FCRTH),
@@ -366,7 +367,7 @@
"Ignoring RxFCHighThresh when no RxFC\n");
}
{ /* Receive Flow Control Low Threshold */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Rx Flow Control Low Threshold",
.err = "using default of " __MODULE_STRING(DEFAULT_FCRTL),
@@ -386,7 +387,7 @@
"Ignoring RxFCLowThresh when no RxFC\n");
}
{ /* Flow Control Pause Time Request*/
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Flow Control Pause Time Request",
.err = "using default of "__MODULE_STRING(DEFAULT_FCPAUSE),
@@ -396,7 +397,7 @@
};
if(num_FCReqTimeout > bd) {
- int pause_time = FCReqTimeout[bd];
+ unsigned int pause_time = FCReqTimeout[bd];
ixgb_validate_option(&pause_time, &opt);
adapter->hw.fc.pause_time = pause_time;
} else {
@@ -419,7 +420,7 @@
}
}
{ /* Receive Interrupt Delay */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Receive Interrupt Delay",
.err = "using default of " __MODULE_STRING(DEFAULT_RDTR),
@@ -436,7 +437,7 @@
}
}
{ /* Transmit Interrupt Delay */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = range_option,
.name = "Transmit Interrupt Delay",
.err = "using default of " __MODULE_STRING(DEFAULT_TIDV),
@@ -454,7 +455,7 @@
}
{ /* Transmit Interrupt Delay Enable */
- struct ixgb_option opt = {
+ const struct ixgb_option opt = {
.type = enable_option,
.name = "Tx Interrupt Delay Enable",
.err = "defaulting to Enabled",
@@ -462,7 +463,7 @@
};
if(num_IntDelayEnable > bd) {
- int ide = IntDelayEnable[bd];
+ unsigned int ide = IntDelayEnable[bd];
ixgb_validate_option(&ide, &opt);
adapter->tx_int_delay_enable = ide;
} else {
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index c160a7d..bc51432 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -244,7 +244,7 @@
extern struct ixgbe_info ixgbe_82598AT_info;
extern char ixgbe_driver_name[];
-extern char ixgbe_driver_version[];
+extern const char ixgbe_driver_version[];
extern int ixgbe_up(struct ixgbe_adapter *adapter);
extern void ixgbe_down(struct ixgbe_adapter *adapter);
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 00ee201..4d64673 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -30,8 +30,7 @@
#include <linux/delay.h>
#include <linux/sched.h>
-#include "ixgbe_type.h"
-#include "ixgbe_common.h"
+#include "ixgbe.h"
#include "ixgbe_phy.h"
#define IXGBE_82598_MAX_TX_QUEUES 32
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index b75f1c6..00bc525 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -45,12 +45,13 @@
#include "ixgbe_common.h"
char ixgbe_driver_name[] = "ixgbe";
-static char ixgbe_driver_string[] =
- "Intel(R) 10 Gigabit PCI Express Network Driver";
+static const char ixgbe_driver_string[] =
+ "Intel(R) 10 Gigabit PCI Express Network Driver";
#define DRV_VERSION "1.1.18"
-char ixgbe_driver_version[] = DRV_VERSION;
-static char ixgbe_copyright[] = "Copyright (c) 1999-2007 Intel Corporation.";
+const char ixgbe_driver_version[] = DRV_VERSION;
+static const char ixgbe_copyright[] =
+ "Copyright (c) 1999-2007 Intel Corporation.";
static const struct ixgbe_info *ixgbe_info_tbl[] = {
[board_82598AF] = &ixgbe_82598AF_info,
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 662b8d1..45f30a2 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -284,7 +284,7 @@
unregister_netdev(dev);
}
-static struct pernet_operations __net_initdata loopback_net_ops = {
+static struct pernet_operations loopback_net_ops = {
.init = loopback_net_init,
.exit = loopback_net_exit,
};
diff --git a/drivers/net/mlx4/icm.c b/drivers/net/mlx4/icm.c
index 887633b..2a5bef6 100644
--- a/drivers/net/mlx4/icm.c
+++ b/drivers/net/mlx4/icm.c
@@ -101,9 +101,7 @@
if (!page)
return -ENOMEM;
- sg_set_page(mem, page);
- mem->length = PAGE_SIZE << order;
- mem->offset = 0;
+ sg_set_page(mem, page, PAGE_SIZE << order, 0);
return 0;
}
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 366e62a..0f306dd 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -1151,7 +1151,7 @@
u16 length;
__wsum checksum;
- while (rx_done->entry[idx].length != 0 && work_done++ < budget) {
+ while (rx_done->entry[idx].length != 0 && work_done < budget) {
length = ntohs(rx_done->entry[idx].length);
rx_done->entry[idx].length = 0;
checksum = csum_unfold(rx_done->entry[idx].checksum);
@@ -1167,6 +1167,7 @@
rx_bytes += rx_ok * (unsigned long)length;
cnt++;
idx = cnt & (myri10ge_max_intr_slots - 1);
+ work_done++;
}
rx_done->idx = idx;
rx_done->cnt = cnt;
@@ -1233,13 +1234,12 @@
struct myri10ge_priv *mgp =
container_of(napi, struct myri10ge_priv, napi);
struct net_device *netdev = mgp->dev;
- struct myri10ge_rx_done *rx_done = &mgp->rx_done;
int work_done;
/* process as many rx events as NAPI will allow */
work_done = myri10ge_clean_rx_done(mgp, budget);
- if (rx_done->entry[rx_done->idx].length == 0 || !netif_running(netdev)) {
+ if (work_done < budget || !netif_running(netdev)) {
netif_rx_complete(netdev, napi);
put_be32(htonl(3), mgp->irq_claim);
}
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 9531171..87cde06 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -864,6 +864,7 @@
np = netdev_priv(dev);
netif_napi_add(dev, &np->napi, natsemi_poll, 64);
+ np->dev = dev;
np->pci_dev = pdev;
pci_set_drvdata(pdev, dev);
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 73dcbb7..ad134a6 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -274,7 +274,7 @@
spin_lock_init(&lp->window_lock);
link->io.NumPorts1 = 32;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = &el3_interrupt;
link->irq.Instance = dev;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 32076ca..a98fe07c 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -188,7 +188,7 @@
spin_lock_init(&lp->lock);
link->io.NumPorts1 = 16;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = &el3_interrupt;
link->irq.Instance = dev;
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index a95a2ca..8d910a3 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -158,7 +158,7 @@
info = PRIV(dev);
info->p_dev = link;
link->priv = dev;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 6284467..8c719b4 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -249,7 +249,7 @@
link->io.IOAddrLines = 5;
/* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = &fjn_interrupt;
link->irq.Instance = dev;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 9d45e96..db6a97d 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -254,7 +254,7 @@
info->p_dev = link;
link->priv = dev;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 58d716f..c9868e9 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -328,7 +328,7 @@
link->io.NumPorts1 = 16;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 4;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = &smc_interrupt;
link->irq.Instance = dev;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index c3b6960..1f09bea 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -886,7 +886,7 @@
}
printk(KNOT_XIRC "no ports available\n");
} else {
- link->irq.Attributes |= IRQ_TYPE_EXCLUSIVE;
+ link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
link->io.NumPorts1 = 16;
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
link->io.BasePort1 = ioaddr;
diff --git a/drivers/net/ppp_mppe.c b/drivers/net/ppp_mppe.c
index bcb0885..b35d794 100644
--- a/drivers/net/ppp_mppe.c
+++ b/drivers/net/ppp_mppe.c
@@ -68,7 +68,7 @@
static unsigned int
setup_sg(struct scatterlist *sg, const void *address, unsigned int length)
{
- sg_init_one(sg, address, length);
+ sg_set_buf(sg, address, length);
return length;
}
@@ -140,6 +140,8 @@
struct scatterlist sg[4];
unsigned int nbytes;
+ sg_init_table(sg, 4);
+
nbytes = setup_sg(&sg[0], state->master_key, state->keylen);
nbytes += setup_sg(&sg[1], sha_pad->sha_pad1,
sizeof(sha_pad->sha_pad1));
@@ -166,6 +168,8 @@
if (!initial_key) {
crypto_blkcipher_setkey(state->arc4, state->sha1_digest,
state->keylen);
+ sg_init_table(sg_in, 1);
+ sg_init_table(sg_out, 1);
setup_sg(sg_in, state->sha1_digest, state->keylen);
setup_sg(sg_out, state->session_key, state->keylen);
if (crypto_blkcipher_encrypt(&desc, sg_out, sg_in,
@@ -421,6 +425,8 @@
isize -= 2;
/* Encrypt packet */
+ sg_init_table(sg_in, 1);
+ sg_init_table(sg_out, 1);
setup_sg(sg_in, ibuf, isize);
setup_sg(sg_out, obuf, osize);
if (crypto_blkcipher_encrypt(&desc, sg_out, sg_in, isize) != 0) {
@@ -608,6 +614,8 @@
* Decrypt the first byte in order to check if it is
* a compressed or uncompressed protocol field.
*/
+ sg_init_table(sg_in, 1);
+ sg_init_table(sg_out, 1);
setup_sg(sg_in, ibuf, 1);
setup_sg(sg_out, obuf, 1);
if (crypto_blkcipher_decrypt(&desc, sg_out, sg_in, 1) != 0) {
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 8936ed3..a005d8f 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -491,7 +491,7 @@
int error = -ENOMEM;
struct sock *sk;
- sk = sk_alloc(net, PF_PPPOX, GFP_KERNEL, &pppoe_sk_proto, 1);
+ sk = sk_alloc(net, PF_PPPOX, GFP_KERNEL, &pppoe_sk_proto);
if (!sk)
goto out;
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index 921d4ef..f8904fd 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -1416,7 +1416,7 @@
int error = -ENOMEM;
struct sock *sk;
- sk = sk_alloc(net, PF_PPPOX, GFP_KERNEL, &pppol2tp_sk_proto, 1);
+ sk = sk_alloc(net, PF_PPPOX, GFP_KERNEL, &pppol2tp_sk_proto);
if (!sk)
goto out;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index e8960f2..b94fa7e 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -392,7 +392,9 @@
void __iomem *mmio_addr; /* memory map physical address */
struct pci_dev *pci_dev; /* Index of PCI device */
struct net_device *dev;
+#ifdef CONFIG_R8169_NAPI
struct napi_struct napi;
+#endif
spinlock_t lock; /* spin lock flag */
u32 msg_enable;
int chipset;
@@ -2989,13 +2991,16 @@
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
- unsigned int poll_locked = 0;
unsigned int intrmask;
rtl8169_delete_timer(dev);
netif_stop_queue(dev);
+#ifdef CONFIG_R8169_NAPI
+ napi_disable(&tp->napi);
+#endif
+
core_down:
spin_lock_irq(&tp->lock);
@@ -3009,11 +3014,6 @@
synchronize_irq(dev->irq);
- if (!poll_locked) {
- napi_disable(&tp->napi);
- poll_locked++;
- }
-
/* Give a racing hard_start_xmit a few cycles to complete. */
synchronize_sched(); /* FIXME: should this be synchronize_irq()? */
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index 19152f5..b822859 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -79,12 +79,10 @@
*/
/*
- * These are checked at init time to see if they are at least 256KB
- * and increased to 256KB if they are not. This is done to avoid ending
- * up with socket buffers smaller than the MTU size,
+ * sysctl_[wr]mem_max are checked at init time to see if they are at
+ * least 256KB and increased to 256KB if they are not. This is done to
+ * avoid ending up with socket buffers smaller than the MTU size,
*/
-extern __u32 sysctl_wmem_max;
-extern __u32 sysctl_rmem_max;
static int __devinit rr_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 9741d61..a3ff270 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -2214,9 +2214,7 @@
struct dev_mc_list *dmi;
struct ucc_fast *uf_regs;
struct ucc_geth_82xx_address_filtering_pram *p_82xx_addr_filt;
- u8 tempaddr[6];
- u8 *mcptr, *tdptr;
- int i, j;
+ int i;
ugeth = netdev_priv(dev);
@@ -2255,19 +2253,10 @@
if (!(dmi->dmi_addr[0] & 1))
continue;
- /* The address in dmi_addr is LSB first,
- * and taddr is MSB first. We have to
- * copy bytes MSB first from dmi_addr.
- */
- mcptr = (u8 *) dmi->dmi_addr + 5;
- tdptr = (u8 *) tempaddr;
- for (j = 0; j < 6; j++)
- *tdptr++ = *mcptr--;
-
/* Ask CPM to run CRC and set bit in
* filter mask.
*/
- hw_add_addr_in_hash(ugeth, tempaddr);
+ hw_add_addr_in_hash(ugeth, dmi->dmi_addr);
}
}
}
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index a2de32f..2c68573 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -586,6 +586,10 @@
USB_DEVICE(0x0a46, 0x0268), /* ShanTou ST268 USB NIC */
.driver_info = (unsigned long)&dm9601_info,
},
+ {
+ USB_DEVICE(0x0a46, 0x8515), /* ADMtek ADM8515 USB NIC */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
{}, // END
};
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index cd991a0..1ebe325 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -512,11 +512,19 @@
}
tmp = le32_to_cpu(u.init_c->max_transfer_size);
if (tmp < dev->hard_mtu) {
- dev_err(&intf->dev,
- "dev can't take %u byte packets (max %u)\n",
- dev->hard_mtu, tmp);
- retval = -EINVAL;
- goto fail_and_release;
+ if (tmp <= net->hard_header_len) {
+ dev_err(&intf->dev,
+ "dev can't take %u byte packets (max %u)\n",
+ dev->hard_mtu, tmp);
+ retval = -EINVAL;
+ goto fail_and_release;
+ }
+ dev->hard_mtu = tmp;
+ net->mtu = dev->hard_mtu - net->hard_header_len;
+ dev_warn(&intf->dev,
+ "dev can't take %u byte packets (max %u), "
+ "adjusting MTU to %u\n",
+ dev->hard_mtu, tmp, net->mtu);
}
/* REVISIT: peripheral "alignment" request is ignored ... */
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 5ea8772..37c52e1 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -142,9 +142,10 @@
* To date internally, just copy this out to the user.
*/
case LMCIOCGINFO: /*fold01*/
- if (copy_to_user(ifr->ifr_data, &sc->ictl, sizeof (lmc_ctl_t)))
- return -EFAULT;
- ret = 0;
+ if (copy_to_user(ifr->ifr_data, &sc->ictl, sizeof(lmc_ctl_t)))
+ ret = -EFAULT;
+ else
+ ret = 0;
break;
case LMCIOCSINFO: /*fold01*/
@@ -159,8 +160,10 @@
break;
}
- if (copy_from_user(&ctl, ifr->ifr_data, sizeof (lmc_ctl_t)))
- return -EFAULT;
+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(lmc_ctl_t))) {
+ ret = -EFAULT;
+ break;
+ }
sc->lmc_media->set_status (sc, &ctl);
@@ -190,8 +193,10 @@
break;
}
- if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t)))
- return -EFAULT;
+ if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t))) {
+ ret = -EFAULT;
+ break;
+ }
if (new_type == old_type)
@@ -229,9 +234,10 @@
sc->lmc_xinfo.Magic1 = 0xDEADBEEF;
if (copy_to_user(ifr->ifr_data, &sc->lmc_xinfo,
- sizeof (struct lmc_xinfo)))
- return -EFAULT;
- ret = 0;
+ sizeof(struct lmc_xinfo)))
+ ret = -EFAULT;
+ else
+ ret = 0;
break;
@@ -262,9 +268,9 @@
if (copy_to_user(ifr->ifr_data, &sc->stats,
sizeof (struct lmc_statistics)))
- return -EFAULT;
-
- ret = 0;
+ ret = -EFAULT;
+ else
+ ret = 0;
break;
case LMCIOCCLEARLMCSTATS: /*fold01*/
@@ -292,8 +298,10 @@
break;
}
- if (copy_from_user(&ctl, ifr->ifr_data, sizeof (lmc_ctl_t)))
- return -EFAULT;
+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(lmc_ctl_t))) {
+ ret = -EFAULT;
+ break;
+ }
sc->lmc_media->set_circuit_type(sc, ctl.circuit_type);
sc->ictl.circuit_type = ctl.circuit_type;
ret = 0;
@@ -318,12 +326,15 @@
#ifdef DEBUG
case LMCIOCDUMPEVENTLOG:
- if (copy_to_user(ifr->ifr_data, &lmcEventLogIndex, sizeof (u32)))
- return -EFAULT;
+ if (copy_to_user(ifr->ifr_data, &lmcEventLogIndex, sizeof(u32))) {
+ ret = -EFAULT;
+ break;
+ }
if (copy_to_user(ifr->ifr_data + sizeof (u32), lmcEventLogBuf, sizeof (lmcEventLogBuf)))
- return -EFAULT;
+ ret = -EFAULT;
+ else
+ ret = 0;
- ret = 0;
break;
#endif /* end ifdef _DBG_EVENTLOG */
case LMCIOCT1CONTROL: /*fold01*/
@@ -346,8 +357,10 @@
*/
netif_stop_queue(dev);
- if (copy_from_user(&xc, ifr->ifr_data, sizeof (struct lmc_xilinx_control)))
- return -EFAULT;
+ if (copy_from_user(&xc, ifr->ifr_data, sizeof(struct lmc_xilinx_control))) {
+ ret = -EFAULT;
+ break;
+ }
switch(xc.command){
case lmc_xilinx_reset: /*fold02*/
{
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 9d9ff76..5058e60 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2391,7 +2391,7 @@
if (b43_debug(dev, B43_DBG_PWORK_FAST))
delay = msecs_to_jiffies(50);
else
- delay = round_jiffies(HZ * 15);
+ delay = round_jiffies_relative(HZ * 15);
queue_delayed_work(wl->hw->workqueue, &dev->periodic_work, delay);
out:
mutex_unlock(&wl->mutex);
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index d09479e..f0e56df 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2260,7 +2260,7 @@
if (b43legacy_debug(dev, B43legacy_DBG_PWORK_FAST))
delay = msecs_to_jiffies(50);
else
- delay = round_jiffies(HZ);
+ delay = round_jiffies_relative(HZ);
queue_delayed_work(dev->wl->hw->workqueue,
&dev->periodic_work, delay);
out:
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index a6c7904..8d53d08 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -1769,7 +1769,7 @@
if (priv->stop_rf_kill) {
priv->stop_rf_kill = 0;
queue_delayed_work(priv->workqueue, &priv->rf_kill,
- round_jiffies(HZ));
+ round_jiffies_relative(HZ));
}
deferred = 1;
@@ -2086,7 +2086,8 @@
/* Make sure the RF Kill check timer is running */
priv->stop_rf_kill = 0;
cancel_delayed_work(&priv->rf_kill);
- queue_delayed_work(priv->workqueue, &priv->rf_kill, round_jiffies(HZ));
+ queue_delayed_work(priv->workqueue, &priv->rf_kill,
+ round_jiffies_relative(HZ));
}
static void send_scan_event(void *data)
@@ -2123,7 +2124,7 @@
if (!delayed_work_pending(&priv->scan_event_later))
queue_delayed_work(priv->workqueue,
&priv->scan_event_later,
- round_jiffies(msecs_to_jiffies(4000)));
+ round_jiffies_relative(msecs_to_jiffies(4000)));
} else {
priv->user_requested_scan = 0;
cancel_delayed_work(&priv->scan_event_later);
@@ -4242,7 +4243,7 @@
priv->stop_rf_kill = 0;
cancel_delayed_work(&priv->rf_kill);
queue_delayed_work(priv->workqueue, &priv->rf_kill,
- round_jiffies(HZ));
+ round_jiffies_relative(HZ));
} else
schedule_reset(priv);
}
@@ -5981,7 +5982,7 @@
IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
if (!priv->stop_rf_kill)
queue_delayed_work(priv->workqueue, &priv->rf_kill,
- round_jiffies(HZ));
+ round_jiffies_relative(HZ));
goto exit_unlock;
}
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index e3c8284..54f44e5 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -1753,7 +1753,7 @@
/* Make sure the RF_KILL check timer is running */
cancel_delayed_work(&priv->rf_kill);
queue_delayed_work(priv->workqueue, &priv->rf_kill,
- round_jiffies(2 * HZ));
+ round_jiffies_relative(2 * HZ));
} else
queue_work(priv->workqueue, &priv->up);
}
@@ -4364,7 +4364,7 @@
if (!priv->user_requested_scan) {
if (!delayed_work_pending(&priv->scan_event))
queue_delayed_work(priv->workqueue, &priv->scan_event,
- round_jiffies(msecs_to_jiffies(4000)));
+ round_jiffies_relative(msecs_to_jiffies(4000)));
} else {
union iwreq_data wrqu;
@@ -4728,7 +4728,7 @@
&& priv->status & STATUS_ASSOCIATED)
queue_delayed_work(priv->workqueue,
&priv->request_scan,
- round_jiffies(HZ));
+ round_jiffies_relative(HZ));
/* Send an empty event to user space.
* We don't send the received data on the event because
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 25cfc6c..8d52a26 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -96,8 +96,8 @@
If you want to compile the driver as a module ( = code which can be
inserted in and remvoed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called iwl4965.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>. The
+ module will be called iwl4965.ko.
config IWL3945
tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
@@ -124,5 +124,5 @@
If you want to compile the driver as a module ( = code which can be
inserted in and remvoed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called iwl3945.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>. The
+ module will be called iwl3945.ko.
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 557deeb..891f90d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -3232,9 +3232,7 @@
tx->rate_n_flags = iwl_hw_set_rate_n_flags(iwl_rates[rate_index].plcp,
rate_flags);
- if (ieee80211_is_probe_request(fc))
- tx->tx_flags |= TX_CMD_FLG_TSF_MSK;
- else if (ieee80211_is_back_request(fc))
+ if (ieee80211_is_back_request(fc))
tx->tx_flags |= TX_CMD_FLG_ACK_MSK |
TX_CMD_FLG_IMM_BA_RSP_MASK;
#ifdef CONFIG_IWLWIFI_HT
@@ -3872,7 +3870,7 @@
*/
case IEEE80211_STYPE_ASSOC_RESP:
case IEEE80211_STYPE_REASSOC_RESP:
- if (network_packet && iwl_is_associated(priv)) {
+ if (network_packet) {
#ifdef CONFIG_IWLWIFI_HT
u8 *pos = NULL;
struct ieee802_11_elems elems;
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 83019d1..4f22a71 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -6478,8 +6478,9 @@
IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN,
"Scan completion watchdog resetting adapter (%dms)\n",
jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
+
if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
- queue_work(priv->workqueue, &priv->restart);
+ iwl_send_scan_abort(priv);
}
mutex_unlock(&priv->mutex);
}
@@ -6575,7 +6576,7 @@
spin_unlock_irqrestore(&priv->lock, flags);
scan->suspend_time = 0;
- scan->max_out_time = cpu_to_le32(600 * 1024);
+ scan->max_out_time = cpu_to_le32(200 * 1024);
if (!interval)
interval = suspend_time;
/*
@@ -6605,7 +6606,7 @@
memcpy(scan->direct_scan[0].ssid,
priv->direct_ssid, priv->direct_ssid_len);
direct_mask = 1;
- } else if (!iwl_is_associated(priv)) {
+ } else if (!iwl_is_associated(priv) && priv->essid_len) {
scan->direct_scan[0].id = WLAN_EID_SSID;
scan->direct_scan[0].len = priv->essid_len;
memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
@@ -6744,6 +6745,12 @@
mutex_lock(&priv->mutex);
+ if (!priv->interface_id || !priv->is_open) {
+ mutex_unlock(&priv->mutex);
+ return;
+ }
+ iwl_scan_cancel_timeout(priv, 200);
+
conf = ieee80211_get_hw_conf(priv->hw);
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
@@ -6882,9 +6889,19 @@
struct iwl_priv *priv = hw->priv;
IWL_DEBUG_MAC80211("enter\n");
+
+
+ mutex_lock(&priv->mutex);
+ /* stop mac, cancel any scan request and clear
+ * RXON_FILTER_ASSOC_MSK BIT
+ */
priv->is_open = 0;
- /*netif_stop_queue(dev); */
- flush_workqueue(priv->workqueue);
+ iwl_scan_cancel_timeout(priv, 100);
+ cancel_delayed_work(&priv->post_associate);
+ priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ iwl_commit_rxon(priv);
+ mutex_unlock(&priv->mutex);
+
IWL_DEBUG_MAC80211("leave\n");
}
@@ -7169,8 +7186,6 @@
if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
iwl_config_ap(priv);
else {
- priv->staging_rxon.filter_flags |=
- RXON_FILTER_ASSOC_MSK;
rc = iwl_commit_rxon(priv);
if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc)
iwl_add_station(priv,
@@ -7178,6 +7193,7 @@
}
} else {
+ iwl_scan_cancel_timeout(priv, 100);
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
iwl_commit_rxon(priv);
}
@@ -7217,6 +7233,12 @@
IWL_DEBUG_MAC80211("enter\n");
mutex_lock(&priv->mutex);
+
+ iwl_scan_cancel_timeout(priv, 100);
+ cancel_delayed_work(&priv->post_associate);
+ priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ iwl_commit_rxon(priv);
+
if (priv->interface_id == conf->if_id) {
priv->interface_id = 0;
memset(priv->bssid, 0, ETH_ALEN);
@@ -7238,6 +7260,7 @@
IWL_DEBUG_MAC80211("enter\n");
+ mutex_lock(&priv->mutex);
spin_lock_irqsave(&priv->lock, flags);
if (!iwl_is_ready_rf(priv)) {
@@ -7268,7 +7291,8 @@
priv->direct_ssid_len = (u8)
min((u8) len, (u8) IW_ESSID_MAX_SIZE);
memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len);
- }
+ } else
+ priv->one_direct_scan = 0;
rc = iwl_scan_initiate(priv);
@@ -7276,6 +7300,7 @@
out_unlock:
spin_unlock_irqrestore(&priv->lock, flags);
+ mutex_unlock(&priv->mutex);
return rc;
}
@@ -7310,6 +7335,8 @@
mutex_lock(&priv->mutex);
+ iwl_scan_cancel_timeout(priv, 100);
+
switch (cmd) {
case SET_KEY:
rc = iwl_update_sta_key_info(priv, key, sta_id);
@@ -7479,8 +7506,18 @@
spin_unlock_irqrestore(&priv->lock, flags);
+ /* we are restarting association process
+ * clear RXON_FILTER_ASSOC_MSK bit
+ */
+ if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
+ iwl_scan_cancel_timeout(priv, 100);
+ priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ iwl_commit_rxon(priv);
+ }
+
/* Per mac80211.h: This is only used in IBSS mode... */
if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
+
IWL_DEBUG_MAC80211("leave - not in IBSS\n");
mutex_unlock(&priv->mutex);
return;
@@ -8558,6 +8595,9 @@
iwl_rate_control_unregister(priv->hw);
}
+ /*netif_stop_queue(dev); */
+ flush_workqueue(priv->workqueue);
+
/* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
* priv->workqueue... so we can't take down the workqueue
* until now... */
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 5e12792..d60adcb 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -6845,8 +6845,9 @@
IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN,
"Scan completion watchdog resetting adapter (%dms)\n",
jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
+
if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
- queue_work(priv->workqueue, &priv->restart);
+ iwl_send_scan_abort(priv);
}
mutex_unlock(&priv->mutex);
}
@@ -6942,7 +6943,7 @@
spin_unlock_irqrestore(&priv->lock, flags);
scan->suspend_time = 0;
- scan->max_out_time = cpu_to_le32(600 * 1024);
+ scan->max_out_time = cpu_to_le32(200 * 1024);
if (!interval)
interval = suspend_time;
@@ -6965,7 +6966,7 @@
memcpy(scan->direct_scan[0].ssid,
priv->direct_ssid, priv->direct_ssid_len);
direct_mask = 1;
- } else if (!iwl_is_associated(priv)) {
+ } else if (!iwl_is_associated(priv) && priv->essid_len) {
scan->direct_scan[0].id = WLAN_EID_SSID;
scan->direct_scan[0].len = priv->essid_len;
memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
@@ -7118,6 +7119,12 @@
mutex_lock(&priv->mutex);
+ if (!priv->interface_id || !priv->is_open) {
+ mutex_unlock(&priv->mutex);
+ return;
+ }
+ iwl_scan_cancel_timeout(priv, 200);
+
conf = ieee80211_get_hw_conf(priv->hw);
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
@@ -7271,9 +7278,19 @@
struct iwl_priv *priv = hw->priv;
IWL_DEBUG_MAC80211("enter\n");
+
+
+ mutex_lock(&priv->mutex);
+ /* stop mac, cancel any scan request and clear
+ * RXON_FILTER_ASSOC_MSK BIT
+ */
priv->is_open = 0;
- /*netif_stop_queue(dev); */
- flush_workqueue(priv->workqueue);
+ iwl_scan_cancel_timeout(priv, 100);
+ cancel_delayed_work(&priv->post_associate);
+ priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ iwl_commit_rxon(priv);
+ mutex_unlock(&priv->mutex);
+
IWL_DEBUG_MAC80211("leave\n");
}
@@ -7573,8 +7590,6 @@
if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
iwl_config_ap(priv);
else {
- priv->staging_rxon.filter_flags |=
- RXON_FILTER_ASSOC_MSK;
rc = iwl_commit_rxon(priv);
if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc)
iwl_rxon_add_station(
@@ -7582,6 +7597,7 @@
}
} else {
+ iwl_scan_cancel_timeout(priv, 100);
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
iwl_commit_rxon(priv);
}
@@ -7621,6 +7637,12 @@
IWL_DEBUG_MAC80211("enter\n");
mutex_lock(&priv->mutex);
+
+ iwl_scan_cancel_timeout(priv, 100);
+ cancel_delayed_work(&priv->post_associate);
+ priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ iwl_commit_rxon(priv);
+
if (priv->interface_id == conf->if_id) {
priv->interface_id = 0;
memset(priv->bssid, 0, ETH_ALEN);
@@ -7642,6 +7664,7 @@
IWL_DEBUG_MAC80211("enter\n");
+ mutex_lock(&priv->mutex);
spin_lock_irqsave(&priv->lock, flags);
if (!iwl_is_ready_rf(priv)) {
@@ -7672,7 +7695,8 @@
priv->direct_ssid_len = (u8)
min((u8) len, (u8) IW_ESSID_MAX_SIZE);
memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len);
- }
+ } else
+ priv->one_direct_scan = 0;
rc = iwl_scan_initiate(priv);
@@ -7680,6 +7704,7 @@
out_unlock:
spin_unlock_irqrestore(&priv->lock, flags);
+ mutex_unlock(&priv->mutex);
return rc;
}
@@ -7713,6 +7738,8 @@
mutex_lock(&priv->mutex);
+ iwl_scan_cancel_timeout(priv, 100);
+
switch (cmd) {
case SET_KEY:
rc = iwl_update_sta_key_info(priv, key, sta_id);
@@ -7903,8 +7930,18 @@
spin_unlock_irqrestore(&priv->lock, flags);
+ /* we are restarting association process
+ * clear RXON_FILTER_ASSOC_MSK bit
+ */
+ if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
+ iwl_scan_cancel_timeout(priv, 100);
+ priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ iwl_commit_rxon(priv);
+ }
+
/* Per mac80211.h: This is only used in IBSS mode... */
if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
+
IWL_DEBUG_MAC80211("leave - not in IBSS\n");
mutex_unlock(&priv->mutex);
return;
@@ -9152,6 +9189,9 @@
iwl_rate_control_unregister(priv->hw);
}
+ /*netif_stop_queue(dev); */
+ flush_workqueue(priv->workqueue);
+
/* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
* priv->workqueue... so we can't take down the workqueue
* until now... */
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 298faa9d..06d9bc0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -30,7 +30,7 @@
* Interval defines
* Both the link tuner as the rfkill will be called once per second.
*/
-#define LINK_TUNE_INTERVAL ( round_jiffies(HZ) )
+#define LINK_TUNE_INTERVAL ( round_jiffies_relative(HZ) )
#define RFKILL_POLL_INTERVAL ( 1000 )
/*
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index de61c8f..e454ae8 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -433,6 +433,9 @@
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
+ rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
+ rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
+
rtl8187_init_urbs(dev);
reg = RTL818X_RX_CONF_ONLYERLPKT |
@@ -582,32 +585,31 @@
static void rtl8187_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
- int mc_count, struct dev_addr_list *mc_list)
+ int mc_count, struct dev_addr_list *mclist)
{
struct rtl8187_priv *priv = dev->priv;
- *total_flags = 0;
-
- if (changed_flags & FIF_ALLMULTI)
- priv->rx_conf ^= RTL818X_RX_CONF_MULTICAST;
if (changed_flags & FIF_FCSFAIL)
priv->rx_conf ^= RTL818X_RX_CONF_FCS;
if (changed_flags & FIF_CONTROL)
priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
if (changed_flags & FIF_OTHER_BSS)
priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
-
- if (mc_count > 0)
+ if (*total_flags & FIF_ALLMULTI || mc_count > 0)
priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
+ else
+ priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
- if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
- *total_flags |= FIF_ALLMULTI;
+ *total_flags = 0;
+
if (priv->rx_conf & RTL818X_RX_CONF_FCS)
*total_flags |= FIF_FCSFAIL;
if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
*total_flags |= FIF_CONTROL;
if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
*total_flags |= FIF_OTHER_BSS;
+ if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
+ *total_flags |= FIF_ALLMULTI;
rtl818x_iowrite32_async(priv, &priv->map->RX_CONF, priv->rx_conf);
}
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 0c4ab3b..e079a52 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -34,7 +34,7 @@
#include "intel-iommu.h"
#include <asm/proto.h> /* force_iommu in this header in x86-64*/
#include <asm/cacheflush.h>
-#include <asm/iommu.h>
+#include <asm/gart.h>
#include "pci.h"
#define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
@@ -745,12 +745,12 @@
"non-zero reserved fields in PTE",
"Unknown"
};
-#define MAX_FAULT_REASON_IDX ARRAY_SIZE(fault_reason_strings)
+#define MAX_FAULT_REASON_IDX ARRAY_SIZE(fault_reason_strings) - 1
char *dmar_get_fault_reason(u8 fault_reason)
{
- if (fault_reason > MAX_FAULT_REASON_IDX)
- return fault_reason_strings[MAX_FAULT_REASON_IDX];
+ if (fault_reason >= MAX_FAULT_REASON_IDX)
+ return fault_reason_strings[MAX_FAULT_REASON_IDX - 1];
else
return fault_reason_strings[fault_reason];
}
@@ -995,7 +995,6 @@
return iommu;
error_unmap:
iounmap(iommu->reg);
- iommu->reg = 0;
error:
kfree(iommu);
return NULL;
@@ -1808,7 +1807,7 @@
if (!domain) {
printk(KERN_ERR
"Allocating domain for %s failed", pci_name(pdev));
- return 0;
+ return NULL;
}
/* make sure context mapping is ok */
@@ -1818,7 +1817,7 @@
printk(KERN_ERR
"Domain context map for %s failed",
pci_name(pdev));
- return 0;
+ return NULL;
}
}
diff --git a/drivers/pci/intel-iommu.h b/drivers/pci/intel-iommu.h
index ee88dd2..459ad1f 100644
--- a/drivers/pci/intel-iommu.h
+++ b/drivers/pci/intel-iommu.h
@@ -58,7 +58,7 @@
hi = readl(dmar + reg + 4); \
(((u64) hi) << 32) + lo; })
*/
-static inline u64 dmar_readq(void *addr)
+static inline u64 dmar_readq(void __iomem *addr)
{
u32 lo, hi;
lo = readl(addr);
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 8c1012b..e2041b4 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -542,8 +542,6 @@
/* RTC Power management control */
-static struct timespec s3c_rtc_delta;
-
static int ticnt_save;
static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index fd5d0c1..0011849 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -562,8 +562,6 @@
sg_init_table(sg_list->sg, sg_list->count);
for (i = 0, sg = sg_list->sg; i < sg_list->count; i++, sg++) {
- sg->length = min(size, PAGE_SIZE);
- sg->offset = 0;
address = (void *) get_zeroed_page(GFP_KERNEL);
if (address == NULL) {
sg_list->count = i;
@@ -571,7 +569,7 @@
retval = -ENOMEM;
goto out;
}
- zfcp_address_to_sg(address, sg);
+ zfcp_address_to_sg(address, sg, min(size, PAGE_SIZE));
size -= sg->length;
}
@@ -1518,13 +1516,13 @@
return -ENOMEM;
memset(data, 0, sizeof(*data));
+ sg_init_table(&data->req , 1);
+ sg_init_table(&data->resp , 1);
data->ct.req = &data->req;
data->ct.resp = &data->resp;
data->ct.req_count = data->ct.resp_count = 1;
- zfcp_address_to_sg(&data->ct_iu_req, &data->req);
- zfcp_address_to_sg(&data->ct_iu_resp, &data->resp);
- data->req.length = sizeof(struct ct_iu_gid_pn_req);
- data->resp.length = sizeof(struct ct_iu_gid_pn_resp);
+ zfcp_address_to_sg(&data->ct_iu_req, &data->req, sizeof(struct ct_iu_gid_pn_req));
+ zfcp_address_to_sg(&data->ct_iu_resp, &data->resp, sizeof(struct ct_iu_gid_pn_resp));
*gid_pn = data;
return 0;
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 326e7ee..e268f79 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -70,12 +70,12 @@
* zfcp_address_to_sg - set up struct scatterlist from kernel address
* @address: kernel address
* @list: struct scatterlist
+ * @size: buffer size
*/
static inline void
-zfcp_address_to_sg(void *address, struct scatterlist *list)
+zfcp_address_to_sg(void *address, struct scatterlist *list, unsigned int size)
{
- sg_set_page(list, virt_to_page(address));
- list->offset = ((unsigned long) address) & (PAGE_SIZE - 1);
+ sg_set_buf(list, address, size);
}
#define REQUEST_LIST_SIZE 128
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 9438d0b..5552b75 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -322,9 +322,9 @@
if (address == NULL)
goto nomem;
- zfcp_address_to_sg(address, send_els->req);
+ zfcp_address_to_sg(address, send_els->req, sizeof(struct zfcp_ls_adisc));
address += PAGE_SIZE >> 1;
- zfcp_address_to_sg(address, send_els->resp);
+ zfcp_address_to_sg(address, send_els->resp, sizeof(struct zfcp_ls_adisc_acc));
send_els->req_count = send_els->resp_count = 1;
send_els->adapter = adapter;
@@ -336,9 +336,6 @@
adisc = zfcp_sg_to_address(send_els->req);
send_els->ls_code = adisc->code = ZFCP_LS_ADISC;
- send_els->req->length = sizeof(struct zfcp_ls_adisc);
- send_els->resp->length = sizeof(struct zfcp_ls_adisc_acc);
-
/* acc. to FC-FS, hard_nport_id in ADISC should not be set for ports
without FC-AL-2 capability, so we don't set it */
adisc->wwpn = fc_host_port_name(adapter->scsi_host);
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index a5763c6..86cf10e 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -172,12 +172,12 @@
don't need this for those tiny 6-slot cdrom changers. Media
changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
If you have such hardware and want to use it with linux, say Y
- here. Check <file:Documentation/scsi-changer.txt> for details.
+ here. Check <file:Documentation/scsi/scsi-changer.txt> for details.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt> and
- <file:Documentation/scsi.txt>. The module will be called ch.o.
+ <file:Documentation/scsi/scsi.txt>. The module will be called ch.o.
If unsure, say N.
diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
index 72b0393..1e6d7a9 100644
--- a/drivers/scsi/aacraid/commctrl.c
+++ b/drivers/scsi/aacraid/commctrl.c
@@ -391,7 +391,7 @@
/*
* Extract the fibctx from the input parameters
*/
- if (fibctx->unique == (u32)(ptrdiff_t)arg) /* We found a winner */
+ if (fibctx->unique == (u32)(uintptr_t)arg) /* We found a winner */
break;
entry = entry->next;
fibctx = NULL;
@@ -590,7 +590,7 @@
}
addr = (u64)upsg->sg[i].addr[0];
addr += ((u64)upsg->sg[i].addr[1]) << 32;
- sg_user[i] = (void __user *)(ptrdiff_t)addr;
+ sg_user[i] = (void __user *)(uintptr_t)addr;
sg_list[i] = p; // save so we can clean up later
sg_indx = i;
@@ -633,7 +633,7 @@
rcode = -ENOMEM;
goto cleanup;
}
- sg_user[i] = (void __user *)(ptrdiff_t)usg->sg[i].addr;
+ sg_user[i] = (void __user *)(uintptr_t)usg->sg[i].addr;
sg_list[i] = p; // save so we can clean up later
sg_indx = i;
@@ -664,7 +664,7 @@
if (actual_fibsize64 == fibsize) {
struct user_sgmap64* usg = (struct user_sgmap64 *)upsg;
for (i = 0; i < upsg->count; i++) {
- u64 addr;
+ uintptr_t addr;
void* p;
/* Does this really need to be GFP_DMA? */
p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA);
@@ -676,7 +676,7 @@
}
addr = (u64)usg->sg[i].addr[0];
addr += ((u64)usg->sg[i].addr[1]) << 32;
- sg_user[i] = (void __user *)(ptrdiff_t)addr;
+ sg_user[i] = (void __user *)addr;
sg_list[i] = p; // save so we can clean up later
sg_indx = i;
@@ -704,7 +704,7 @@
rcode = -ENOMEM;
goto cleanup;
}
- sg_user[i] = (void __user *)(ptrdiff_t)upsg->sg[i].addr;
+ sg_user[i] = (void __user *)(uintptr_t)upsg->sg[i].addr;
sg_list[i] = p; // save so we can clean up later
sg_indx = i;
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 3009ad8..8736813 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -110,7 +110,7 @@
/*
* Align the beginning of Headers to commalign
*/
- align = (commalign - ((ptrdiff_t)(base) & (commalign - 1)));
+ align = (commalign - ((uintptr_t)(base) & (commalign - 1)));
base = base + align;
phys = phys + align;
/*
diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c
index fcd25f7..e6032ff 100644
--- a/drivers/scsi/aacraid/dpcsup.c
+++ b/drivers/scsi/aacraid/dpcsup.c
@@ -254,7 +254,7 @@
kfree (fib);
return 1;
}
- memcpy(hw_fib, (struct hw_fib *)(((ptrdiff_t)(dev->regs.sa)) +
+ memcpy(hw_fib, (struct hw_fib *)(((uintptr_t)(dev->regs.sa)) +
(index & ~0x00000002L)), sizeof(struct hw_fib));
INIT_LIST_HEAD(&fib->fiblink);
fib->type = FSAFS_NTC_FIB_CONTEXT;
diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
index ace7a15..a67e29f 100644
--- a/drivers/scsi/arcmsr/arcmsr.h
+++ b/drivers/scsi/arcmsr/arcmsr.h
@@ -141,14 +141,14 @@
#define IS_SG64_ADDR 0x01000000 /* bit24 */
struct SG32ENTRY
{
- uint32_t length;
- uint32_t address;
+ __le32 length;
+ __le32 address;
};
struct SG64ENTRY
{
- uint32_t length;
- uint32_t address;
- uint32_t addresshigh;
+ __le32 length;
+ __le32 address;
+ __le32 addresshigh;
};
struct SGENTRY_UNION
{
@@ -339,23 +339,15 @@
uint32_t done_qbuffer[ARCMSR_MAX_HBB_POSTQUEUE];
uint32_t postq_index;
uint32_t doneq_index;
- uint32_t *drv2iop_doorbell_reg;
- uint32_t *drv2iop_doorbell_mask_reg;
- uint32_t *iop2drv_doorbell_reg;
- uint32_t *iop2drv_doorbell_mask_reg;
- uint32_t *msgcode_rwbuffer_reg;
- uint32_t *ioctl_wbuffer_reg;
- uint32_t *ioctl_rbuffer_reg;
+ uint32_t __iomem *drv2iop_doorbell_reg;
+ uint32_t __iomem *drv2iop_doorbell_mask_reg;
+ uint32_t __iomem *iop2drv_doorbell_reg;
+ uint32_t __iomem *iop2drv_doorbell_mask_reg;
+ uint32_t __iomem *msgcode_rwbuffer_reg;
+ uint32_t __iomem *ioctl_wbuffer_reg;
+ uint32_t __iomem *ioctl_rbuffer_reg;
};
-struct MessageUnit
-{
- union
- {
- struct MessageUnit_A pmu_A;
- struct MessageUnit_B pmu_B;
- } u;
-};
/*
*******************************************************************************
** Adapter Control Block
@@ -374,7 +366,10 @@
/* Offset is used in making arc cdb physical to virtual calculations */
uint32_t outbound_int_enable;
- struct MessageUnit * pmu;
+ union {
+ struct MessageUnit_A __iomem * pmuA;
+ struct MessageUnit_B * pmuB;
+ };
/* message unit ATU inbound base address0 */
uint32_t acb_flags;
@@ -558,7 +553,7 @@
extern void arcmsr_post_ioctldata2iop(struct AdapterControlBlock *);
extern void arcmsr_iop_message_read(struct AdapterControlBlock *);
-extern struct QBUFFER *arcmsr_get_iop_rqbuffer(struct AdapterControlBlock *);
+extern struct QBUFFER __iomem *arcmsr_get_iop_rqbuffer(struct AdapterControlBlock *);
extern struct class_device_attribute *arcmsr_host_attrs[];
extern int arcmsr_alloc_sysfs_attr(struct AdapterControlBlock *);
void arcmsr_free_sysfs_attr(struct AdapterControlBlock *acb);
diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c
index d04d1aa..7d7b0a5 100644
--- a/drivers/scsi/arcmsr/arcmsr_attr.c
+++ b/drivers/scsi/arcmsr/arcmsr_attr.c
@@ -85,13 +85,13 @@
allxfer_len++;
}
if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
- struct QBUFFER *prbuffer;
- uint8_t *iop_data;
+ struct QBUFFER __iomem *prbuffer;
+ uint8_t __iomem *iop_data;
int32_t iop_len;
acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
prbuffer = arcmsr_get_iop_rqbuffer(acb);
- iop_data = (uint8_t *)prbuffer->data;
+ iop_data = prbuffer->data;
iop_len = readl(&prbuffer->data_len);
while (iop_len > 0) {
acb->rqbuffer[acb->rqbuf_lastindex] = readb(iop_data);
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index f7a2528..d466a2d 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -236,18 +236,22 @@
uint32_t intmask_org;
int i, j;
- acb->pmu = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
- if (!acb->pmu) {
+ acb->pmuA = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+ if (!acb->pmuA) {
printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n",
acb->host->host_no);
+ return -ENOMEM;
}
dma_coherent = dma_alloc_coherent(&pdev->dev,
ARCMSR_MAX_FREECCB_NUM *
sizeof (struct CommandControlBlock) + 0x20,
&dma_coherent_handle, GFP_KERNEL);
- if (!dma_coherent)
+
+ if (!dma_coherent) {
+ iounmap(acb->pmuA);
return -ENOMEM;
+ }
acb->dma_coherent = dma_coherent;
acb->dma_coherent_handle = dma_coherent_handle;
@@ -287,7 +291,7 @@
struct pci_dev *pdev = acb->pdev;
struct MessageUnit_B *reg;
- void *mem_base0, *mem_base1;
+ void __iomem *mem_base0, *mem_base1;
void *dma_coherent;
dma_addr_t dma_coherent_handle, dma_addr;
uint32_t intmask_org;
@@ -328,25 +332,28 @@
reg = (struct MessageUnit_B *)(dma_coherent +
ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock));
- acb->pmu = (struct MessageUnit *)reg;
+ acb->pmuB = reg;
mem_base0 = ioremap(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
+ if (!mem_base0)
+ goto out;
+
mem_base1 = ioremap(pci_resource_start(pdev, 2),
pci_resource_len(pdev, 2));
- reg->drv2iop_doorbell_reg = (uint32_t *)((char *)mem_base0 +
- ARCMSR_DRV2IOP_DOORBELL);
- reg->drv2iop_doorbell_mask_reg = (uint32_t *)((char *)mem_base0 +
- ARCMSR_DRV2IOP_DOORBELL_MASK);
- reg->iop2drv_doorbell_reg = (uint32_t *)((char *)mem_base0 +
- ARCMSR_IOP2DRV_DOORBELL);
- reg->iop2drv_doorbell_mask_reg = (uint32_t *)((char *)mem_base0 +
- ARCMSR_IOP2DRV_DOORBELL_MASK);
- reg->ioctl_wbuffer_reg = (uint32_t *)((char *)mem_base1 +
- ARCMSR_IOCTL_WBUFFER);
- reg->ioctl_rbuffer_reg = (uint32_t *)((char *)mem_base1 +
- ARCMSR_IOCTL_RBUFFER);
- reg->msgcode_rwbuffer_reg = (uint32_t *)((char *)mem_base1 +
- ARCMSR_MSGCODE_RWBUFFER);
+ if (!mem_base1) {
+ iounmap(mem_base0);
+ goto out;
+ }
+
+ reg->drv2iop_doorbell_reg = mem_base0 + ARCMSR_DRV2IOP_DOORBELL;
+ reg->drv2iop_doorbell_mask_reg = mem_base0 +
+ ARCMSR_DRV2IOP_DOORBELL_MASK;
+ reg->iop2drv_doorbell_reg = mem_base0 + ARCMSR_IOP2DRV_DOORBELL;
+ reg->iop2drv_doorbell_mask_reg = mem_base0 +
+ ARCMSR_IOP2DRV_DOORBELL_MASK;
+ reg->ioctl_wbuffer_reg = mem_base1 + ARCMSR_IOCTL_WBUFFER;
+ reg->ioctl_rbuffer_reg = mem_base1 + ARCMSR_IOCTL_RBUFFER;
+ reg->msgcode_rwbuffer_reg = mem_base1 + ARCMSR_MSGCODE_RWBUFFER;
acb->vir2phy_offset = (unsigned long)ccb_tmp -(unsigned long)dma_addr;
for (i = 0; i < ARCMSR_MAX_TARGETID; i++)
@@ -362,6 +369,12 @@
break;
}
return 0;
+
+out:
+ dma_free_coherent(&acb->pdev->dev,
+ ARCMSR_MAX_FREECCB_NUM * sizeof(struct CommandControlBlock) + 0x20,
+ acb->dma_coherent, acb->dma_coherent_handle);
+ return -ENOMEM;
}
static int arcmsr_probe(struct pci_dev *pdev,
@@ -454,7 +467,6 @@
free_irq(pdev->irq, acb);
out_free_ccb_pool:
arcmsr_free_ccb_pool(acb);
- iounmap(acb->pmu);
out_release_regions:
pci_release_regions(pdev);
out_host_put:
@@ -467,7 +479,7 @@
static uint8_t arcmsr_hba_wait_msgint_ready(struct AdapterControlBlock *acb)
{
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
uint32_t Index;
uint8_t Retries = 0x00;
@@ -488,7 +500,7 @@
static uint8_t arcmsr_hbb_wait_msgint_ready(struct AdapterControlBlock *acb)
{
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
uint32_t Index;
uint8_t Retries = 0x00;
@@ -509,7 +521,7 @@
static void arcmsr_abort_hba_allcmd(struct AdapterControlBlock *acb)
{
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
writel(ARCMSR_INBOUND_MESG0_ABORT_CMD, ®->inbound_msgaddr0);
if (arcmsr_hba_wait_msgint_ready(acb))
@@ -520,7 +532,7 @@
static void arcmsr_abort_hbb_allcmd(struct AdapterControlBlock *acb)
{
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
writel(ARCMSR_MESSAGE_ABORT_CMD, reg->drv2iop_doorbell_reg);
if (arcmsr_hbb_wait_msgint_ready(acb))
@@ -566,7 +578,7 @@
static void arcmsr_flush_hba_cache(struct AdapterControlBlock *acb)
{
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
int retry_count = 30;
writel(ARCMSR_INBOUND_MESG0_FLUSH_CACHE, ®->inbound_msgaddr0);
@@ -583,7 +595,7 @@
static void arcmsr_flush_hbb_cache(struct AdapterControlBlock *acb)
{
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
int retry_count = 30;
writel(ARCMSR_MESSAGE_FLUSH_CACHE, reg->drv2iop_doorbell_reg);
@@ -637,7 +649,7 @@
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A : {
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
orig_mask = readl(®->outbound_intmask)|\
ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE;
writel(orig_mask|ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE, \
@@ -646,7 +658,7 @@
break;
case ACB_ADAPTER_TYPE_B : {
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
orig_mask = readl(reg->iop2drv_doorbell_mask_reg) & \
(~ARCMSR_IOP2DRV_MESSAGE_CMD_DONE);
writel(0, reg->iop2drv_doorbell_mask_reg);
@@ -748,14 +760,13 @@
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A: {
- struct MessageUnit_A __iomem *reg = \
- (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
uint32_t outbound_intstatus;
- outbound_intstatus = readl(®->outbound_intstatus) & \
+ outbound_intstatus = readl(®->outbound_intstatus) &
acb->outbound_int_enable;
/*clear and abort all outbound posted Q*/
writel(outbound_intstatus, ®->outbound_intstatus);/*clear interrupt*/
- while (((flag_ccb = readl(®->outbound_queueport)) != 0xFFFFFFFF) \
+ while (((flag_ccb = readl(®->outbound_queueport)) != 0xFFFFFFFF)
&& (i++ < ARCMSR_MAX_OUTSTANDING_CMD)) {
arcmsr_drain_donequeue(acb, flag_ccb);
}
@@ -763,7 +774,7 @@
break;
case ACB_ADAPTER_TYPE_B: {
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
/*clear all outbound posted Q*/
for (i = 0; i < ARCMSR_MAX_HBB_POSTQUEUE; i++) {
if ((flag_ccb = readl(®->done_qbuffer[i])) != 0) {
@@ -816,7 +827,6 @@
}
free_irq(pdev->irq, acb);
- iounmap(acb->pmu);
arcmsr_free_ccb_pool(acb);
pci_release_regions(pdev);
@@ -859,7 +869,7 @@
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A : {
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
mask = intmask_org & ~(ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE |
ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE);
writel(mask, ®->outbound_intmask);
@@ -868,7 +878,7 @@
break;
case ACB_ADAPTER_TYPE_B : {
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
mask = intmask_org | (ARCMSR_IOP2DRV_DATA_WRITE_OK | \
ARCMSR_IOP2DRV_DATA_READ_OK | ARCMSR_IOP2DRV_CDB_DONE);
writel(mask, reg->iop2drv_doorbell_mask_reg);
@@ -882,7 +892,7 @@
{
struct ARCMSR_CDB *arcmsr_cdb = (struct ARCMSR_CDB *)&ccb->arcmsr_cdb;
int8_t *psge = (int8_t *)&arcmsr_cdb->u;
- uint32_t address_lo, address_hi;
+ __le32 address_lo, address_hi;
int arccdbsize = 0x30;
int nseg;
@@ -900,7 +910,8 @@
BUG_ON(nseg < 0);
if (nseg) {
- int length, i, cdb_sgcount = 0;
+ __le32 length;
+ int i, cdb_sgcount = 0;
struct scatterlist *sg;
/* map stor port SG list to our iop SG List. */
@@ -921,7 +932,7 @@
pdma_sg->addresshigh = address_hi;
pdma_sg->address = address_lo;
- pdma_sg->length = length|IS_SG64_ADDR;
+ pdma_sg->length = length|cpu_to_le32(IS_SG64_ADDR);
psge += sizeof (struct SG64ENTRY);
arccdbsize += sizeof (struct SG64ENTRY);
}
@@ -947,7 +958,7 @@
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A: {
- struct MessageUnit_A *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
if (arcmsr_cdb->Flags & ARCMSR_CDB_FLAG_SGL_BSIZE)
writel(cdb_shifted_phyaddr | ARCMSR_CCBPOST_FLAG_SGL_BSIZE,
@@ -959,7 +970,7 @@
break;
case ACB_ADAPTER_TYPE_B: {
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
uint32_t ending_index, index = reg->postq_index;
ending_index = ((index + 1) % ARCMSR_MAX_HBB_POSTQUEUE);
@@ -982,7 +993,7 @@
static void arcmsr_stop_hba_bgrb(struct AdapterControlBlock *acb)
{
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
acb->acb_flags &= ~ACB_F_MSG_START_BGRB;
writel(ARCMSR_INBOUND_MESG0_STOP_BGRB, ®->inbound_msgaddr0);
@@ -995,7 +1006,7 @@
static void arcmsr_stop_hbb_bgrb(struct AdapterControlBlock *acb)
{
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
acb->acb_flags &= ~ACB_F_MSG_START_BGRB;
writel(ARCMSR_MESSAGE_STOP_BGRB, reg->drv2iop_doorbell_reg);
@@ -1023,6 +1034,17 @@
static void arcmsr_free_ccb_pool(struct AdapterControlBlock *acb)
{
+ switch (acb->adapter_type) {
+ case ACB_ADAPTER_TYPE_A: {
+ iounmap(acb->pmuA);
+ break;
+ }
+ case ACB_ADAPTER_TYPE_B: {
+ struct MessageUnit_B *reg = acb->pmuB;
+ iounmap(reg->drv2iop_doorbell_reg - ARCMSR_DRV2IOP_DOORBELL);
+ iounmap(reg->ioctl_wbuffer_reg - ARCMSR_IOCTL_WBUFFER);
+ }
+ }
dma_free_coherent(&acb->pdev->dev,
ARCMSR_MAX_FREECCB_NUM * sizeof (struct CommandControlBlock) + 0x20,
acb->dma_coherent,
@@ -1033,13 +1055,13 @@
{
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A: {
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
writel(ARCMSR_INBOUND_DRIVER_DATA_READ_OK, ®->inbound_doorbell);
}
break;
case ACB_ADAPTER_TYPE_B: {
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
writel(ARCMSR_DRV2IOP_DATA_READ_OK, reg->drv2iop_doorbell_reg);
}
break;
@@ -1050,7 +1072,7 @@
{
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A: {
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
/*
** push inbound doorbell tell iop, driver data write ok
** and wait reply on next hwinterrupt for next Qbuffer post
@@ -1060,7 +1082,7 @@
break;
case ACB_ADAPTER_TYPE_B: {
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
/*
** push inbound doorbell tell iop, driver data write ok
** and wait reply on next hwinterrupt for next Qbuffer post
@@ -1071,41 +1093,41 @@
}
}
-struct QBUFFER *arcmsr_get_iop_rqbuffer(struct AdapterControlBlock *acb)
+struct QBUFFER __iomem *arcmsr_get_iop_rqbuffer(struct AdapterControlBlock *acb)
{
- static struct QBUFFER *qbuffer;
+ struct QBUFFER __iomem *qbuffer = NULL;
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A: {
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
- qbuffer = (struct QBUFFER __iomem *) ®->message_rbuffer;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
+ qbuffer = (struct QBUFFER __iomem *)®->message_rbuffer;
}
break;
case ACB_ADAPTER_TYPE_B: {
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
- qbuffer = (struct QBUFFER __iomem *) reg->ioctl_rbuffer_reg;
+ struct MessageUnit_B *reg = acb->pmuB;
+ qbuffer = (struct QBUFFER __iomem *)reg->ioctl_rbuffer_reg;
}
break;
}
return qbuffer;
}
-static struct QBUFFER *arcmsr_get_iop_wqbuffer(struct AdapterControlBlock *acb)
+static struct QBUFFER __iomem *arcmsr_get_iop_wqbuffer(struct AdapterControlBlock *acb)
{
- static struct QBUFFER *pqbuffer;
+ struct QBUFFER __iomem *pqbuffer = NULL;
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A: {
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
- pqbuffer = (struct QBUFFER *) ®->message_wbuffer;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
+ pqbuffer = (struct QBUFFER __iomem *) ®->message_wbuffer;
}
break;
case ACB_ADAPTER_TYPE_B: {
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
pqbuffer = (struct QBUFFER __iomem *)reg->ioctl_wbuffer_reg;
}
break;
@@ -1115,15 +1137,15 @@
static void arcmsr_iop2drv_data_wrote_handle(struct AdapterControlBlock *acb)
{
- struct QBUFFER *prbuffer;
+ struct QBUFFER __iomem *prbuffer;
struct QBUFFER *pQbuffer;
- uint8_t *iop_data;
+ uint8_t __iomem *iop_data;
int32_t my_empty_len, iop_len, rqbuf_firstindex, rqbuf_lastindex;
rqbuf_lastindex = acb->rqbuf_lastindex;
rqbuf_firstindex = acb->rqbuf_firstindex;
prbuffer = arcmsr_get_iop_rqbuffer(acb);
- iop_data = (uint8_t *)prbuffer->data;
+ iop_data = (uint8_t __iomem *)prbuffer->data;
iop_len = prbuffer->data_len;
my_empty_len = (rqbuf_firstindex - rqbuf_lastindex -1)&(ARCMSR_MAX_QBUFFER -1);
@@ -1151,8 +1173,8 @@
acb->acb_flags |= ACB_F_MESSAGE_WQBUFFER_READED;
if (acb->wqbuf_firstindex != acb->wqbuf_lastindex) {
uint8_t *pQbuffer;
- struct QBUFFER *pwbuffer;
- uint8_t *iop_data;
+ struct QBUFFER __iomem *pwbuffer;
+ uint8_t __iomem *iop_data;
int32_t allxfer_len = 0;
acb->acb_flags &= (~ACB_F_MESSAGE_WQBUFFER_READED);
@@ -1181,7 +1203,7 @@
static void arcmsr_hba_doorbell_isr(struct AdapterControlBlock *acb)
{
uint32_t outbound_doorbell;
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
outbound_doorbell = readl(®->outbound_doorbell);
writel(outbound_doorbell, ®->outbound_doorbell);
@@ -1197,7 +1219,7 @@
static void arcmsr_hba_postqueue_isr(struct AdapterControlBlock *acb)
{
uint32_t flag_ccb;
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
while ((flag_ccb = readl(®->outbound_queueport)) != 0xFFFFFFFF) {
arcmsr_drain_donequeue(acb, flag_ccb);
@@ -1208,7 +1230,7 @@
{
uint32_t index;
uint32_t flag_ccb;
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
index = reg->doneq_index;
@@ -1224,7 +1246,7 @@
static int arcmsr_handle_hba_isr(struct AdapterControlBlock *acb)
{
uint32_t outbound_intstatus;
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
outbound_intstatus = readl(®->outbound_intstatus) & \
acb->outbound_int_enable;
@@ -1244,7 +1266,7 @@
static int arcmsr_handle_hbb_isr(struct AdapterControlBlock *acb)
{
uint32_t outbound_doorbell;
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
outbound_doorbell = readl(reg->iop2drv_doorbell_reg) & \
acb->outbound_int_enable;
@@ -1305,8 +1327,8 @@
{
int32_t wqbuf_firstindex, wqbuf_lastindex;
uint8_t *pQbuffer;
- struct QBUFFER *pwbuffer;
- uint8_t *iop_data;
+ struct QBUFFER __iomem *pwbuffer;
+ uint8_t __iomem *iop_data;
int32_t allxfer_len = 0;
pwbuffer = arcmsr_get_iop_wqbuffer(acb);
@@ -1380,13 +1402,13 @@
}
if (acb->acb_flags & ACB_F_IOPDATA_OVERFLOW) {
- struct QBUFFER *prbuffer;
- uint8_t *iop_data;
+ struct QBUFFER __iomem *prbuffer;
+ uint8_t __iomem *iop_data;
int32_t iop_len;
acb->acb_flags &= ~ACB_F_IOPDATA_OVERFLOW;
prbuffer = arcmsr_get_iop_rqbuffer(acb);
- iop_data = (uint8_t *)prbuffer->data;
+ iop_data = prbuffer->data;
iop_len = readl(&prbuffer->data_len);
while (iop_len > 0) {
acb->rqbuffer[acb->rqbuf_lastindex] = readb(iop_data);
@@ -1669,11 +1691,11 @@
static void arcmsr_get_hba_config(struct AdapterControlBlock *acb)
{
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
char *acb_firm_model = acb->firm_model;
char *acb_firm_version = acb->firm_version;
- char *iop_firm_model = (char *) (®->message_rwbuffer[15]);
- char *iop_firm_version = (char *) (®->message_rwbuffer[17]);
+ char __iomem *iop_firm_model = (char __iomem *)(®->message_rwbuffer[15]);
+ char __iomem *iop_firm_version = (char __iomem *)(®->message_rwbuffer[17]);
int count;
writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0);
@@ -1710,13 +1732,13 @@
static void arcmsr_get_hbb_config(struct AdapterControlBlock *acb)
{
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
- uint32_t *lrwbuffer = reg->msgcode_rwbuffer_reg;
+ struct MessageUnit_B *reg = acb->pmuB;
+ uint32_t __iomem *lrwbuffer = reg->msgcode_rwbuffer_reg;
char *acb_firm_model = acb->firm_model;
char *acb_firm_version = acb->firm_version;
- char *iop_firm_model = (char *) (&lrwbuffer[15]);
+ char __iomem *iop_firm_model = (char __iomem *)(&lrwbuffer[15]);
/*firm_model,15,60-67*/
- char *iop_firm_version = (char *) (&lrwbuffer[17]);
+ char __iomem *iop_firm_version = (char __iomem *)(&lrwbuffer[17]);
/*firm_version,17,68-83*/
int count;
@@ -1777,7 +1799,7 @@
static void arcmsr_polling_hba_ccbdone(struct AdapterControlBlock *acb,
struct CommandControlBlock *poll_ccb)
{
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
struct CommandControlBlock *ccb;
uint32_t flag_ccb, outbound_intstatus, poll_ccb_done = 0, poll_count = 0;
@@ -1826,7 +1848,7 @@
static void arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb, \
struct CommandControlBlock *poll_ccb)
{
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
struct CommandControlBlock *ccb;
uint32_t flag_ccb, poll_ccb_done = 0, poll_count = 0;
int index;
@@ -1918,8 +1940,7 @@
case ACB_ADAPTER_TYPE_A: {
if (ccb_phyaddr_hi32 != 0) {
- struct MessageUnit_A __iomem *reg = \
- (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
uint32_t intmask_org;
intmask_org = arcmsr_disable_outbound_ints(acb);
writel(ARCMSR_SIGNATURE_SET_CONFIG, \
@@ -1940,9 +1961,9 @@
case ACB_ADAPTER_TYPE_B: {
unsigned long post_queue_phyaddr;
- uint32_t *rwbuffer;
+ uint32_t __iomem *rwbuffer;
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
uint32_t intmask_org;
intmask_org = arcmsr_disable_outbound_ints(acb);
reg->postq_index = 0;
@@ -1994,7 +2015,7 @@
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A: {
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
do {
firmware_state = readl(®->outbound_msgaddr1);
} while ((firmware_state & ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK) == 0);
@@ -2002,7 +2023,7 @@
break;
case ACB_ADAPTER_TYPE_B: {
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
do {
firmware_state = readl(reg->iop2drv_doorbell_reg);
} while ((firmware_state & ARCMSR_MESSAGE_FIRMWARE_OK) == 0);
@@ -2013,7 +2034,7 @@
static void arcmsr_start_hba_bgrb(struct AdapterControlBlock *acb)
{
- struct MessageUnit_A __iomem *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
acb->acb_flags |= ACB_F_MSG_START_BGRB;
writel(ARCMSR_INBOUND_MESG0_START_BGRB, ®->inbound_msgaddr0);
if (arcmsr_hba_wait_msgint_ready(acb)) {
@@ -2024,7 +2045,7 @@
static void arcmsr_start_hbb_bgrb(struct AdapterControlBlock *acb)
{
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
acb->acb_flags |= ACB_F_MSG_START_BGRB;
writel(ARCMSR_MESSAGE_START_BGRB, reg->drv2iop_doorbell_reg);
if (arcmsr_hbb_wait_msgint_ready(acb)) {
@@ -2049,7 +2070,7 @@
{
switch (acb->adapter_type) {
case ACB_ADAPTER_TYPE_A: {
- struct MessageUnit_A *reg = (struct MessageUnit_A *)acb->pmu;
+ struct MessageUnit_A __iomem *reg = acb->pmuA;
uint32_t outbound_doorbell;
/* empty doorbell Qbuffer if door bell ringed */
outbound_doorbell = readl(®->outbound_doorbell);
@@ -2060,7 +2081,7 @@
break;
case ACB_ADAPTER_TYPE_B: {
- struct MessageUnit_B *reg = (struct MessageUnit_B *)acb->pmu;
+ struct MessageUnit_B *reg = acb->pmuB;
/*clear interrupt and message state*/
writel(ARCMSR_MESSAGE_INT_CLEAR_PATTERN, reg->iop2drv_doorbell_reg);
writel(ARCMSR_DRV2IOP_DATA_READ_OK, reg->drv2iop_doorbell_reg);
diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h
index 21ba571..bb6550e 100644
--- a/drivers/scsi/arm/scsi.h
+++ b/drivers/scsi/arm/scsi.h
@@ -38,9 +38,7 @@
if (ret) {
SCp->buffer++;
SCp->buffers_residual--;
- SCp->ptr = (char *)
- (page_address(SCp->buffer->page) +
- SCp->buffer->offset);
+ SCp->ptr = sg_virt(SCp->buffer);
SCp->this_residual = SCp->buffer->length;
} else {
SCp->ptr = NULL;
@@ -76,9 +74,7 @@
SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer;
SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1;
- SCpnt->SCp.ptr = (char *)
- (page_address(SCpnt->SCp.buffer->page) +
- SCpnt->SCp.buffer->offset);
+ SCpnt->SCp.ptr = sg_virt(SCpnt->SCp.buffer);
SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
SCpnt->SCp.phase = SCpnt->request_bufflen;
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index d178098..a9680b5 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -477,10 +477,9 @@
for (endaddr = virt_to_phys(cmd->SCp.ptr + cmd->SCp.this_residual - 1) + 1;
cmd->SCp.buffers_residual &&
- virt_to_phys(page_address(cmd->SCp.buffer[1].page) +
- cmd->SCp.buffer[1].offset) == endaddr;) {
+ virt_to_phys(sg_virt(&cmd->SCp.buffer[1])) == endaddr;) {
MER_PRINTK("VTOP(%p) == %08lx -> merging\n",
- page_address(cmd->SCp.buffer[1].page), endaddr);
+ page_address(sg_page(&cmd->SCp.buffer[1])), endaddr);
#if (NDEBUG & NDEBUG_MERGING)
++cnt;
#endif
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 439b97a..0841df0 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -2890,7 +2890,7 @@
return NULL;
}
- sg_set_page(&scatterlist[i], page);
+ sg_set_page(&scatterlist[i], page, 0, 0);
}
return sglist;
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 6ce4109..4bcf916 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -79,9 +79,7 @@
iscsi_buf_init_sg(struct iscsi_buf *ibuf, struct scatterlist *sg)
{
sg_init_table(&ibuf->sg, 1);
- sg_set_page(&ibuf->sg, sg_page(sg));
- ibuf->sg.offset = sg->offset;
- ibuf->sg.length = sg->length;
+ sg_set_page(&ibuf->sg, sg_page(sg), sg->length, sg->offset);
/*
* Fastpath: sg element fits into single page
*/
@@ -676,9 +674,8 @@
{
struct scatterlist temp;
- memcpy(&temp, sg, sizeof(struct scatterlist));
- temp.offset = offset;
- temp.length = length;
+ sg_init_table(&temp, 1);
+ sg_set_page(&temp, sg_page(sg), length, offset);
crypto_hash_update(desc, &temp, length);
}
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index 1c5c4b6..4652ad2 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -5256,8 +5256,7 @@
STbuffer->sg[0].offset = 0;
if (page != NULL) {
- sg_set_page(&STbuffer->sg[0], page);
- STbuffer->sg[0].length = b_size;
+ sg_set_page(&STbuffer->sg[0], page, b_size, 0);
STbuffer->b_data = page_address(page);
break;
}
@@ -5285,8 +5284,7 @@
normalize_buffer(STbuffer);
return 0;
}
- sg_set_page(&STbuffer->sg[segs], page);
- STbuffer->sg[segs].length = (OS_FRAME_SIZE - got <= PAGE_SIZE / 2) ? (OS_FRAME_SIZE - got) : b_size;
+ sg_set_page(&STbuffer->sg[segs], page, (OS_FRAME_SIZE - got <= PAGE_SIZE / 2) ? (OS_FRAME_SIZE - got) : b_size, 0);
got += STbuffer->sg[segs].length;
STbuffer->buffer_size = got;
STbuffer->sg_segs = ++segs;
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index cc19710..f1871ea 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1652,6 +1652,7 @@
schp->buffer = kzalloc(sg_bufflen, gfp_flags);
if (!schp->buffer)
return -ENOMEM;
+ sg_init_table(schp->buffer, tablesize);
schp->sglist_len = sg_bufflen;
return tablesize; /* number of scat_gath elements allocated */
}
@@ -1717,16 +1718,12 @@
goto out_unlock; */
}
- sg_set_page(sgl, pages[0]);
- sgl[0].offset = uaddr & ~PAGE_MASK;
+ sg_set_page(sgl, pages[0], 0, uaddr & ~PAGE_MASK);
if (nr_pages > 1) {
sgl[0].length = PAGE_SIZE - sgl[0].offset;
count -= sgl[0].length;
- for (i=1; i < nr_pages ; i++) {
- sg_set_page(&sgl[i], pages[i]);
- sgl[i].length = count < PAGE_SIZE ? count : PAGE_SIZE;
- count -= PAGE_SIZE;
- }
+ for (i=1; i < nr_pages ; i++)
+ sg_set_page(&sgl[i], pages[i], count < PAGE_SIZE ? count : PAGE_SIZE, 0);
}
else {
sgl[0].length = count;
@@ -1854,8 +1851,7 @@
scatter_elem_sz_prev = ret_sz;
}
}
- sg_set_page(sg, p);
- sg->length = (ret_sz > num) ? num : ret_sz;
+ sg_set_page(sg, p, (ret_sz > num) ? num : ret_sz, 0);
SCSI_LOG_TIMEOUT(5, printk("sg_build_indirect: k=%d, num=%d, "
"ret_sz=%d\n", k, num, ret_sz));
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index ce69b9e..98dfd6e 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -3797,13 +3797,11 @@
sg = &(STbp->sg[0]);
frp = STbp->frp;
for (i=count=0; count < length; i++) {
- sg_set_page(&sg[i], frp[i].page);
if (length - count > frp[i].length)
- sg[i].length = frp[i].length;
+ sg_set_page(&sg[i], frp[i].page, frp[i].length, 0);
else
- sg[i].length = length - count;
+ sg_set_page(&sg[i], frp[i].page, length - count, 0);
count += sg[i].length;
- sg[i].offset = 0;
}
STbp->sg_segs = i;
STbp->frp_sg_current = length;
@@ -4446,15 +4444,13 @@
}
/* Populate the scatter/gather list */
- sg_set_page(&sgl[0], pages[0]);
- sgl[0].offset = uaddr & ~PAGE_MASK;
+ sg_set_page(&sgl[0], pages[0], 0, uaddr & ~PAGE_MASK);
if (nr_pages > 1) {
sgl[0].length = PAGE_SIZE - sgl[0].offset;
count -= sgl[0].length;
for (i=1; i < nr_pages ; i++) {
- sg_set_page(&sgl[i], pages[i]);;
- sgl[i].offset = 0;
- sgl[i].length = count < PAGE_SIZE ? count : PAGE_SIZE;
+ sg_set_page(&sgl[i], pages[i],
+ count < PAGE_SIZE ? count : PAGE_SIZE, 0);;
count -= PAGE_SIZE;
}
}
diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c
index 80fb3f8..1bc4190 100644
--- a/drivers/scsi/sun3x_esp.c
+++ b/drivers/scsi/sun3x_esp.c
@@ -332,8 +332,8 @@
struct scatterlist *sg = sp->SCp.buffer;
while (sz >= 0) {
- sg[sz].dma_address = dvma_map((unsigned long)page_address(sg[sz].page) +
- sg[sz].offset, sg[sz].length);
+ sg[sz].dma_address = dvma_map((unsigned long)sg_virt(&sg[sz]),
+ sg[sz].length);
sz--;
}
sp->SCp.ptr=(char *)((unsigned long)sp->SCp.buffer->dma_address);
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 1031890..3bb5d24 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1875,6 +1875,7 @@
int baud, int parity, int bits, int flow)
{
struct ktermios termios;
+ static struct ktermios dummy;
int i;
/*
@@ -1920,7 +1921,7 @@
*/
port->mctrl |= TIOCM_DTR;
- port->ops->set_termios(port, &termios, NULL);
+ port->ops->set_termios(port, &termios, &dummy);
co->cflag = termios.c_cflag;
return 0;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 5afcb2f..d8b6600 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -345,7 +345,7 @@
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
if (do_sound) {
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 6846a6c..7ad2192 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -657,7 +657,15 @@
serial_txx9_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
- if (state == 0)
+ /*
+ * If oldstate was -1 this is called from
+ * uart_configure_port(). In this case do not initialize the
+ * port now, because the port was already initialized (for
+ * non-console port) or should not be initialized here (for
+ * console port). If we initialized the port here we lose
+ * serial console settings.
+ */
+ if (state == 0 && oldstate != -1)
serial_txx9_initialize(port);
}
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index 161d102..e52a629 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -601,8 +601,7 @@
return 0;
}
-static int maple_bus_uevent(struct device *dev, char **envp,
- int num_envp, char *buffer, int buffer_size)
+static int maple_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
{
return 0;
}
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index c55459c..b3518ca 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -184,14 +184,14 @@
if (u_tmp->rx_buf) {
k_tmp->rx_buf = buf;
if (!access_ok(VERIFY_WRITE, (u8 __user *)
- (ptrdiff_t) u_tmp->rx_buf,
+ (uintptr_t) u_tmp->rx_buf,
u_tmp->len))
goto done;
}
if (u_tmp->tx_buf) {
k_tmp->tx_buf = buf;
if (copy_from_user(buf, (const u8 __user *)
- (ptrdiff_t) u_tmp->tx_buf,
+ (uintptr_t) u_tmp->tx_buf,
u_tmp->len))
goto done;
}
@@ -224,7 +224,7 @@
for (n = n_xfers, u_tmp = u_xfers; n; n--, u_tmp++) {
if (u_tmp->rx_buf) {
if (__copy_to_user((u8 __user *)
- (ptrdiff_t) u_tmp->rx_buf, buf,
+ (uintptr_t) u_tmp->rx_buf, buf,
u_tmp->len)) {
status = -EFAULT;
goto done;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 8bdaa15..316a746 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -434,7 +434,7 @@
if (dma) {
io->urbs [i]->transfer_dma = sg_dma_address (sg + i);
len = sg_dma_len (sg + i);
-#if defined(CONFIG_HIGHMEM) || defined(CONFIG_IOMMU)
+#if defined(CONFIG_HIGHMEM) || defined(CONFIG_GART_IOMMU)
io->urbs[i]->transfer_buffer = NULL;
#else
io->urbs[i]->transfer_buffer = sg_virt(&sg[i]);
@@ -1641,7 +1641,13 @@
intf->dev.bus_id, ret);
continue;
}
- usb_create_sysfs_intf_files (intf);
+
+ /* The driver's probe method can call usb_set_interface(),
+ * which would mean the interface's sysfs files are already
+ * created. Just in case, we'll remove them first.
+ */
+ usb_remove_sysfs_intf_files(intf);
+ usb_create_sysfs_intf_files(intf);
}
usb_autosuspend_device(dev);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index c20c03a..d05ead2 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -372,7 +372,7 @@
/* enforce simple/standard policy */
allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP |
- URB_NO_INTERRUPT | URB_DIR_MASK);
+ URB_NO_INTERRUPT | URB_DIR_MASK | URB_FREE_BUFFER);
switch (xfertype) {
case USB_ENDPOINT_XFER_BULK:
if (is_out)
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 1c80406..c72e962 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -3289,7 +3289,7 @@
dev->chiprev = pdev->revision;
pci_set_master(pdev);
- pci_set_mwi(pdev);
+ pci_try_set_mwi(pdev);
/* init dma pools */
if (use_dma) {
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index c978d62..177e78e 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -156,7 +156,7 @@
config USB_OHCI_HCD_SSB
bool "OHCI support for Broadcom SSB OHCI core"
- depends on USB_OHCI_HCD && SSB && EXPERIMENTAL
+ depends on USB_OHCI_HCD && (SSB = y || SSB = CONFIG_USB_OHCI_HCD) && EXPERIMENTAL
default n
---help---
Support for the Sonics Silicon Backplane (SSB) attached
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 240c7f5..704f33f 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -80,7 +80,10 @@
static void ohci_dump (struct ohci_hcd *ohci, int verbose);
static int ohci_init (struct ohci_hcd *ohci);
static void ohci_stop (struct usb_hcd *hcd);
+
+#if defined(CONFIG_PM) || defined(CONFIG_PCI)
static int ohci_restart (struct ohci_hcd *ohci);
+#endif
#include "ohci-hub.c"
#include "ohci-dbg.c"
@@ -396,7 +399,7 @@
*/
static void unlink_watchdog_func(unsigned long _ohci)
{
- long flags;
+ unsigned long flags;
unsigned max;
unsigned seen_count = 0;
unsigned i;
@@ -893,6 +896,8 @@
/*-------------------------------------------------------------------------*/
+#if defined(CONFIG_PM) || defined(CONFIG_PCI)
+
/* must not be called from interrupt context */
static int ohci_restart (struct ohci_hcd *ohci)
{
@@ -954,6 +959,8 @@
return 0;
}
+#endif
+
/*-------------------------------------------------------------------------*/
#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index e5d60d5..60379b1 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -1271,7 +1271,8 @@
} else if (qh->period != urb->interval) {
return -EINVAL; /* Can't change the period */
- } else { /* Pick up where the last URB leaves off */
+ } else {
+ /* Find the next unused frame */
if (list_empty(&qh->queue)) {
frame = qh->iso_frame;
} else {
@@ -1283,10 +1284,18 @@
lurb->number_of_packets *
lurb->interval;
}
- if (urb->transfer_flags & URB_ISO_ASAP)
- urb->start_frame = frame;
- else if (urb->start_frame != frame)
- return -EINVAL;
+ if (urb->transfer_flags & URB_ISO_ASAP) {
+ /* Skip some frames if necessary to insure
+ * the start frame is in the future.
+ */
+ uhci_get_current_frame_number(uhci);
+ if (uhci_frame_before_eq(frame, uhci->frame_number)) {
+ frame = uhci->frame_number + 1;
+ frame += ((qh->phase - frame) &
+ (qh->period - 1));
+ }
+ } /* Otherwise pick up where the last URB leaves off */
+ urb->start_frame = frame;
}
/* Make sure we won't have to go too far into the future */
diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c
index 2677fea..1cd9e7e 100644
--- a/drivers/usb/misc/cytherm.c
+++ b/drivers/usb/misc/cytherm.c
@@ -399,7 +399,6 @@
struct usb_cytherm *dev;
dev = usb_get_intfdata (interface);
- usb_set_intfdata (interface, NULL);
device_remove_file(&interface->dev, &dev_attr_brightness);
device_remove_file(&interface->dev, &dev_attr_temp);
@@ -407,6 +406,9 @@
device_remove_file(&interface->dev, &dev_attr_port0);
device_remove_file(&interface->dev, &dev_attr_port1);
+ /* first remove the files, then NULL the pointer */
+ usb_set_intfdata (interface, NULL);
+
usb_put_dev(dev->udev);
kfree(dev);
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index cd13757..4a09b87 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -114,6 +114,10 @@
/* De-assert reset (let the CPU run) */
err = emi26_set_reset(dev,0);
+ if (err < 0) {
+ err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ goto wraperr;
+ }
msleep(250); /* let device settle */
/* 2. We upload the FPGA firmware into the EMI
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 4758cc5..d136241 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -123,6 +123,10 @@
/* De-assert reset (let the CPU run) */
err = emi62_set_reset(dev,0);
+ if (err < 0) {
+ err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ goto wraperr;
+ }
msleep(250); /* let device settle */
/* 2. We upload the FPGA firmware into the EMI
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index d3d8cd6..148b7fe 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -147,7 +147,7 @@
/* Structure to hold all of our device specific stuff*/
struct usb_ftdi {
struct list_head ftdi_list;
- struct semaphore u132_lock;
+ struct mutex u132_lock;
int command_next;
int command_head;
struct u132_command command[COMMAND_SIZE];
@@ -330,39 +330,39 @@
static void ftdi_elan_abandon_completions(struct usb_ftdi *ftdi)
{
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
while (ftdi->respond_next > ftdi->respond_head) {
struct u132_respond *respond = &ftdi->respond[RESPOND_MASK &
ftdi->respond_head++];
*respond->result = -ESHUTDOWN;
*respond->value = 0;
complete(&respond->wait_completion);
- } up(&ftdi->u132_lock);
+ } mutex_unlock(&ftdi->u132_lock);
}
static void ftdi_elan_abandon_targets(struct usb_ftdi *ftdi)
{
int ed_number = 4;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
while (ed_number-- > 0) {
struct u132_target *target = &ftdi->target[ed_number];
if (target->active == 1) {
target->condition_code = TD_DEVNOTRESP;
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
ftdi_elan_do_callback(ftdi, target, NULL, 0);
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
}
}
ftdi->recieved = 0;
ftdi->expected = 4;
ftdi->ed_found = 0;
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
}
static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi)
{
int ed_number = 4;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
while (ed_number-- > 0) {
struct u132_target *target = &ftdi->target[ed_number];
target->abandoning = 1;
@@ -382,9 +382,9 @@
ftdi->command_next += 1;
ftdi_elan_kick_command_queue(ftdi);
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
goto wait_1;
}
}
@@ -404,9 +404,9 @@
ftdi->command_next += 1;
ftdi_elan_kick_command_queue(ftdi);
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
goto wait_2;
}
}
@@ -414,13 +414,13 @@
ftdi->recieved = 0;
ftdi->expected = 4;
ftdi->ed_found = 0;
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
}
static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi)
{
int ed_number = 4;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
while (ed_number-- > 0) {
struct u132_target *target = &ftdi->target[ed_number];
target->abandoning = 1;
@@ -440,9 +440,9 @@
ftdi->command_next += 1;
ftdi_elan_kick_command_queue(ftdi);
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
goto wait;
}
}
@@ -450,7 +450,7 @@
ftdi->recieved = 0;
ftdi->expected = 4;
ftdi->ed_found = 0;
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
}
static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi)
@@ -886,14 +886,14 @@
char *b)
{
int payload = (ed_length >> 0) & 0x07FF;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
target->actual = 0;
target->non_null = (ed_length >> 15) & 0x0001;
target->repeat_number = (ed_length >> 11) & 0x000F;
if (ed_type == 0x02) {
if (payload == 0 || target->abandoning > 0) {
target->abandoning = 0;
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
payload);
ftdi->recieved = 0;
@@ -903,13 +903,13 @@
} else {
ftdi->expected = 4 + payload;
ftdi->ed_found = 1;
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
return b;
}
} else if (ed_type == 0x03) {
if (payload == 0 || target->abandoning > 0) {
target->abandoning = 0;
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
payload);
ftdi->recieved = 0;
@@ -919,12 +919,12 @@
} else {
ftdi->expected = 4 + payload;
ftdi->ed_found = 1;
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
return b;
}
} else if (ed_type == 0x01) {
target->abandoning = 0;
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
payload);
ftdi->recieved = 0;
@@ -933,7 +933,7 @@
return ftdi->response;
} else {
target->abandoning = 0;
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
payload);
ftdi->recieved = 0;
@@ -947,12 +947,12 @@
struct u132_target *target, u16 ed_length, int ed_number, int ed_type,
char *b)
{
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
target->condition_code = TD_DEVNOTRESP;
target->actual = (ed_length >> 0) & 0x01FF;
target->non_null = (ed_length >> 15) & 0x0001;
target->repeat_number = (ed_length >> 11) & 0x000F;
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
if (target->active)
ftdi_elan_do_callback(ftdi, target, NULL, 0);
target->abandoning = 0;
@@ -1278,7 +1278,7 @@
return -ENODEV;
} else {
int command_size;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
command_size = ftdi->command_next - ftdi->command_head;
if (command_size < COMMAND_SIZE) {
struct u132_command *command = &ftdi->command[
@@ -1292,10 +1292,10 @@
command->buffer = &command->value;
ftdi->command_next += 1;
ftdi_elan_kick_command_queue(ftdi);
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
return 0;
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
goto wait;
}
@@ -1310,7 +1310,7 @@
return -ENODEV;
} else {
int command_size;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
command_size = ftdi->command_next - ftdi->command_head;
if (command_size < COMMAND_SIZE) {
struct u132_command *command = &ftdi->command[
@@ -1324,10 +1324,10 @@
command->buffer = &command->value;
ftdi->command_next += 1;
ftdi_elan_kick_command_queue(ftdi);
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
return 0;
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
goto wait;
}
@@ -1342,7 +1342,7 @@
return -ENODEV;
} else {
int command_size;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
command_size = ftdi->command_next - ftdi->command_head;
if (command_size < COMMAND_SIZE) {
struct u132_command *command = &ftdi->command[
@@ -1356,10 +1356,10 @@
command->buffer = &command->value;
ftdi->command_next += 1;
ftdi_elan_kick_command_queue(ftdi);
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
return 0;
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
goto wait;
}
@@ -1382,7 +1382,7 @@
} else {
int command_size;
int respond_size;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
command_size = ftdi->command_next - ftdi->command_head;
respond_size = ftdi->respond_next - ftdi->respond_head;
if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE)
@@ -1405,11 +1405,11 @@
ftdi->command_next += 1;
ftdi->respond_next += 1;
ftdi_elan_kick_command_queue(ftdi);
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
wait_for_completion(&respond->wait_completion);
return result;
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
goto wait;
}
@@ -1425,7 +1425,7 @@
} else {
int command_size;
int respond_size;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
command_size = ftdi->command_next - ftdi->command_head;
respond_size = ftdi->respond_next - ftdi->respond_head;
if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE)
@@ -1449,11 +1449,11 @@
ftdi->command_next += 1;
ftdi->respond_next += 1;
ftdi_elan_kick_command_queue(ftdi);
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
wait_for_completion(&respond->wait_completion);
return result;
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
goto wait;
}
@@ -1469,7 +1469,7 @@
} else {
int command_size;
int respond_size;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
command_size = ftdi->command_next - ftdi->command_head;
respond_size = ftdi->respond_next - ftdi->respond_head;
if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE)
@@ -1493,11 +1493,11 @@
ftdi->command_next += 1;
ftdi->respond_next += 1;
ftdi_elan_kick_command_queue(ftdi);
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
wait_for_completion(&respond->wait_completion);
return result;
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
goto wait;
}
@@ -1529,7 +1529,7 @@
return -ENODEV;
} else {
int command_size;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
command_size = ftdi->command_next - ftdi->command_head;
if (command_size < COMMAND_SIZE) {
struct u132_target *target = &ftdi->target[ed];
@@ -1550,10 +1550,10 @@
target->active = 1;
ftdi->command_next += 1;
ftdi_elan_kick_command_queue(ftdi);
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
return 0;
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
goto wait;
}
@@ -1586,7 +1586,7 @@
return -ENODEV;
} else {
int command_size;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
command_size = ftdi->command_next - ftdi->command_head;
if (command_size < COMMAND_SIZE) {
struct u132_target *target = &ftdi->target[ed];
@@ -1615,10 +1615,10 @@
target->active = 1;
ftdi->command_next += 1;
ftdi_elan_kick_command_queue(ftdi);
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
return 0;
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
goto wait;
}
@@ -1651,7 +1651,7 @@
return -ENODEV;
} else {
int command_size;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
command_size = ftdi->command_next - ftdi->command_head;
if (command_size < COMMAND_SIZE) {
struct u132_target *target = &ftdi->target[ed];
@@ -1672,10 +1672,10 @@
target->active = 1;
ftdi->command_next += 1;
ftdi_elan_kick_command_queue(ftdi);
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
return 0;
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
goto wait;
}
@@ -1708,7 +1708,7 @@
return -ENODEV;
} else {
int command_size;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
command_size = ftdi->command_next - ftdi->command_head;
if (command_size < COMMAND_SIZE) {
u8 *b;
@@ -1751,10 +1751,10 @@
target->active = 1;
ftdi->command_next += 1;
ftdi_elan_kick_command_queue(ftdi);
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
return 0;
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
goto wait;
}
@@ -1787,7 +1787,7 @@
return -ENODEV;
} else {
int command_size;
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
command_size = ftdi->command_next - ftdi->command_head;
if (command_size < COMMAND_SIZE) {
int remaining_length = urb->transfer_buffer_length -
@@ -1816,10 +1816,10 @@
target->active = 1;
ftdi->command_next += 1;
ftdi_elan_kick_command_queue(ftdi);
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
return 0;
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
goto wait;
}
@@ -1849,9 +1849,9 @@
return -ENODEV;
} else {
struct u132_target *target = &ftdi->target[ed];
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
if (target->abandoning > 0) {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
return 0;
} else {
target->abandoning = 1;
@@ -1873,13 +1873,13 @@
ftdi->command_next += 1;
ftdi_elan_kick_command_queue(ftdi);
} else {
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
msleep(100);
- down(&ftdi->u132_lock);
+ mutex_lock(&ftdi->u132_lock);
goto wait_1;
}
}
- up(&ftdi->u132_lock);
+ mutex_unlock(&ftdi->u132_lock);
return 0;
}
}
@@ -2793,7 +2793,7 @@
init_MUTEX(&ftdi->sw_lock);
ftdi->udev = usb_get_dev(interface_to_usbdev(interface));
ftdi->interface = interface;
- init_MUTEX(&ftdi->u132_lock);
+ mutex_init(&ftdi->u132_lock);
ftdi->expected = 4;
iface_desc = interface->cur_altsetting;
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index e6fd024..4bcf7fb 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -66,6 +66,7 @@
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, value, index, NULL, 0, 1000)
MODULE_DEVICE_TABLE(usb, idmouse_table);
+static DEFINE_MUTEX(open_disc_mutex);
/* structure to hold all of our device specific stuff */
struct usb_idmouse {
@@ -80,7 +81,7 @@
int open; /* if the port is open or not */
int present; /* if the device is not disconnected */
- struct semaphore sem; /* locks this structure */
+ struct mutex lock; /* locks this structure */
};
@@ -213,13 +214,17 @@
if (!interface)
return -ENODEV;
+ mutex_lock(&open_disc_mutex);
/* get the device information block from the interface */
dev = usb_get_intfdata(interface);
- if (!dev)
+ if (!dev) {
+ mutex_unlock(&open_disc_mutex);
return -ENODEV;
+ }
/* lock this device */
- down(&dev->sem);
+ mutex_lock(&dev->lock);
+ mutex_unlock(&open_disc_mutex);
/* check if already open */
if (dev->open) {
@@ -245,7 +250,7 @@
error:
/* unlock this device */
- up(&dev->sem);
+ mutex_unlock(&dev->lock);
return result;
}
@@ -258,12 +263,14 @@
if (dev == NULL)
return -ENODEV;
+ mutex_lock(&open_disc_mutex);
/* lock our device */
- down(&dev->sem);
+ mutex_lock(&dev->lock);
/* are we really open? */
if (dev->open <= 0) {
- up(&dev->sem);
+ mutex_unlock(&dev->lock);
+ mutex_unlock(&open_disc_mutex);
return -ENODEV;
}
@@ -271,10 +278,12 @@
if (!dev->present) {
/* the device was unplugged before the file was released */
- up(&dev->sem);
+ mutex_unlock(&dev->lock);
+ mutex_unlock(&open_disc_mutex);
idmouse_delete(dev);
} else {
- up(&dev->sem);
+ mutex_unlock(&dev->lock);
+ mutex_unlock(&open_disc_mutex);
}
return 0;
}
@@ -286,18 +295,18 @@
int result;
/* lock this object */
- down(&dev->sem);
+ mutex_lock(&dev->lock);
/* verify that the device wasn't unplugged */
if (!dev->present) {
- up(&dev->sem);
+ mutex_unlock(&dev->lock);
return -ENODEV;
}
result = simple_read_from_buffer(buffer, count, ppos,
dev->bulk_in_buffer, IMGSIZE);
/* unlock the device */
- up(&dev->sem);
+ mutex_unlock(&dev->lock);
return result;
}
@@ -320,7 +329,7 @@
if (dev == NULL)
return -ENOMEM;
- init_MUTEX(&dev->sem);
+ mutex_init(&dev->lock);
dev->udev = udev;
dev->interface = interface;
@@ -372,24 +381,26 @@
/* get device structure */
dev = usb_get_intfdata(interface);
- usb_set_intfdata(interface, NULL);
/* give back our minor */
usb_deregister_dev(interface, &idmouse_class);
- /* lock it */
- down(&dev->sem);
+ mutex_lock(&open_disc_mutex);
+ usb_set_intfdata(interface, NULL);
+ /* lock the device */
+ mutex_lock(&dev->lock);
+ mutex_unlock(&open_disc_mutex);
/* prevent device read, write and ioctl */
dev->present = 0;
/* if the device is opened, idmouse_release will clean this up */
if (!dev->open) {
- up(&dev->sem);
+ mutex_unlock(&dev->lock);
idmouse_delete(dev);
} else {
/* unlock */
- up(&dev->sem);
+ mutex_unlock(&dev->lock);
}
info("%s disconnected", DRIVER_DESC);
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index d372fbc..764696f 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -66,6 +66,7 @@
MODULE_PARM_DESC(debug, "debug=1 enables debugging messages");
static struct usb_driver iowarrior_driver;
+static DEFINE_MUTEX(iowarrior_open_disc_lock);
/*--------------*/
/* data */
@@ -351,7 +352,7 @@
mutex_lock(&dev->mutex);
/* verify that the device wasn't unplugged */
- if (dev == NULL || !dev->present) {
+ if (!dev->present) {
retval = -ENODEV;
goto exit;
}
@@ -608,11 +609,15 @@
return -ENODEV;
}
+ mutex_lock(&iowarrior_open_disc_lock);
dev = usb_get_intfdata(interface);
- if (!dev)
+ if (!dev) {
+ mutex_unlock(&iowarrior_open_disc_lock);
return -ENODEV;
+ }
mutex_lock(&dev->mutex);
+ mutex_unlock(&iowarrior_open_disc_lock);
/* Only one process can open each device, no sharing. */
if (dev->opened) {
@@ -866,6 +871,7 @@
int minor;
dev = usb_get_intfdata(interface);
+ mutex_lock(&iowarrior_open_disc_lock);
usb_set_intfdata(interface, NULL);
minor = dev->minor;
@@ -879,6 +885,7 @@
dev->present = 0;
mutex_unlock(&dev->mutex);
+ mutex_unlock(&iowarrior_open_disc_lock);
if (dev->opened) {
/* There is a process that holds a filedescriptor to the device ,
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 561970b..aab3200 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -198,6 +198,7 @@
};
MODULE_DEVICE_TABLE (usb, tower_table);
+static DEFINE_MUTEX(open_disc_mutex);
#define LEGO_USB_TOWER_MINOR_BASE 160
@@ -350,25 +351,31 @@
goto exit;
}
+ mutex_lock(&open_disc_mutex);
dev = usb_get_intfdata(interface);
if (!dev) {
+ mutex_unlock(&open_disc_mutex);
retval = -ENODEV;
goto exit;
}
/* lock this device */
if (down_interruptible (&dev->sem)) {
+ mutex_unlock(&open_disc_mutex);
retval = -ERESTARTSYS;
goto exit;
}
+
/* allow opening only once */
if (dev->open_count) {
+ mutex_unlock(&open_disc_mutex);
retval = -EBUSY;
goto unlock_exit;
}
dev->open_count = 1;
+ mutex_unlock(&open_disc_mutex);
/* reset the tower */
result = usb_control_msg (dev->udev,
@@ -437,9 +444,10 @@
if (dev == NULL) {
dbg(1, "%s: object is NULL", __FUNCTION__);
retval = -ENODEV;
- goto exit;
+ goto exit_nolock;
}
+ mutex_lock(&open_disc_mutex);
if (down_interruptible (&dev->sem)) {
retval = -ERESTARTSYS;
goto exit;
@@ -468,6 +476,8 @@
up (&dev->sem);
exit:
+ mutex_unlock(&open_disc_mutex);
+exit_nolock:
dbg(2, "%s: leave, return value %d", __FUNCTION__, retval);
return retval;
}
@@ -989,6 +999,7 @@
dbg(2, "%s: enter", __FUNCTION__);
dev = usb_get_intfdata (interface);
+ mutex_lock(&open_disc_mutex);
usb_set_intfdata (interface, NULL);
minor = dev->minor;
@@ -997,6 +1008,7 @@
usb_deregister_dev (interface, &tower_class);
down (&dev->sem);
+ mutex_unlock(&open_disc_mutex);
/* if the device is not opened, then we clean up right now */
if (!dev->open_count) {
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index 88f6abe..330c18e 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -118,10 +118,7 @@
mutex_lock(&(rio->lock));
/* Sanity check to make sure rio is connected, powered, etc */
- if ( rio == NULL ||
- rio->present == 0 ||
- rio->rio_dev == NULL )
- {
+ if (rio->present == 0 || rio->rio_dev == NULL) {
retval = -ENODEV;
goto err_out;
}
@@ -280,10 +277,7 @@
if (intr)
return -EINTR;
/* Sanity check to make sure rio is connected, powered, etc */
- if ( rio == NULL ||
- rio->present == 0 ||
- rio->rio_dev == NULL )
- {
+ if (rio->present == 0 || rio->rio_dev == NULL) {
mutex_unlock(&(rio->lock));
return -ENODEV;
}
@@ -369,10 +363,7 @@
if (intr)
return -EINTR;
/* Sanity check to make sure rio is connected, powered, etc */
- if ( rio == NULL ||
- rio->present == 0 ||
- rio->rio_dev == NULL )
- {
+ if (rio->present == 0 || rio->rio_dev == NULL) {
mutex_unlock(&(rio->lock));
return -ENODEV;
}
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 7198420..20777d0 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/errno.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
@@ -34,6 +35,8 @@
};
MODULE_DEVICE_TABLE (usb, id_table);
+static DEFINE_MUTEX(open_disc_mutex);
+
struct usb_lcd {
struct usb_device * udev; /* init: probe_lcd */
@@ -79,12 +82,16 @@
return -ENODEV;
}
+ mutex_lock(&open_disc_mutex);
dev = usb_get_intfdata(interface);
- if (!dev)
+ if (!dev) {
+ mutex_unlock(&open_disc_mutex);
return -ENODEV;
+ }
/* increment our usage count for the device */
kref_get(&dev->kref);
+ mutex_unlock(&open_disc_mutex);
/* grab a power reference */
r = usb_autopm_get_interface(interface);
@@ -393,8 +400,10 @@
struct usb_lcd *dev;
int minor = interface->minor;
+ mutex_lock(&open_disc_mutex);
dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
+ mutex_unlock(&open_disc_mutex);
/* give back our minor */
usb_deregister_dev(interface, &lcd_class);
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 2a8e537..ddfee91 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -161,7 +161,8 @@
{
struct usb_serial *serial = port->serial;
struct ark3116_private *priv = usb_get_serial_port_data(port);
- unsigned int cflag = port->tty->termios->c_cflag;
+ struct ktermios *termios = port->tty->termios;
+ unsigned int cflag = termios->c_cflag;
unsigned long flags;
int baud;
int ark3116_baud;
@@ -177,11 +178,14 @@
*(port->tty->termios) = tty_std_termios;
port->tty->termios->c_cflag = B9600 | CS8
| CREAD | HUPCL | CLOCAL;
+ termios->c_ispeed = 9600;
+ termios->c_ospeed = 9600;
priv->termios_initialized = 1;
}
spin_unlock_irqrestore(&priv->lock, flags);
- cflag = port->tty->termios->c_cflag;
+ cflag = termios->c_cflag;
+ termios->c_cflag &= ~(CMSPAR|CRTSCTS);
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
@@ -254,9 +258,13 @@
case 115200:
case 230400:
case 460800:
+ /* Report the resulting rate back to the caller */
+ tty_encode_baud_rate(port->tty, baud, baud);
break;
/* set 9600 as default (if given baudrate is invalid for example) */
default:
+ tty_encode_baud_rate(port->tty, 9600, 9600);
+ case 0:
baud = 9600;
}
@@ -302,6 +310,7 @@
/* TEST ARK3116_SND(154, 0xFE, 0x40, 0xFFFF, 0x0006); */
kfree(buf);
+
return;
}
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 6b252ce..42582d4 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -272,9 +272,6 @@
dbg("ch341_set_termios()");
- if (!tty || !tty->termios)
- return;
-
baud_rate = tty_get_baud_rate(tty);
switch (baud_rate) {
@@ -299,6 +296,11 @@
* (cflag & PARENB) : parity {NONE, EVEN, ODD}
* (cflag & CSTOPB) : stop bits [1, 2]
*/
+
+ /* Copy back the old hardware settings */
+ tty_termios_copy_hw(tty->termios, old_termios);
+ /* And re-encode with the new baud */
+ tty_encode_baud_rate(tty, baud_rate, baud_rate);
}
static struct usb_driver ch341_driver = {
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 9386e21..0362654 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -164,6 +164,7 @@
}
if (serial->type->set_termios) {
+ struct ktermios dummy;
/* build up a fake tty structure so that the open call has something
* to look at to get the cflag value */
tty = kzalloc(sizeof(*tty), GFP_KERNEL);
@@ -177,12 +178,13 @@
kfree (tty);
return -ENOMEM;
}
+ memset(&dummy, 0, sizeof(struct ktermios));
termios->c_cflag = cflag;
tty->termios = termios;
port->tty = tty;
/* set up the initial termios settings */
- serial->type->set_termios(port, NULL);
+ serial->type->set_termios(port, &dummy);
port->tty = NULL;
kfree (termios);
kfree (tty);
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index eb7df18..3a83cb4 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -361,7 +361,6 @@
dbg("%s - no tty structures", __FUNCTION__);
return;
}
- cflag = port->tty->termios->c_cflag;
cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
/* Convert to baudrate */
@@ -369,40 +368,9 @@
baud = BAUD_RATE_GEN_FREQ / baud;
dbg("%s - baud rate = %d", __FUNCTION__, baud);
- cflag &= ~CBAUD;
- switch (baud) {
- /*
- * The baud rates which are commented out below
- * appear to be supported by the device
- * but are non-standard
- */
- case 600: cflag |= B600; break;
- case 1200: cflag |= B1200; break;
- case 1800: cflag |= B1800; break;
- case 2400: cflag |= B2400; break;
- case 4800: cflag |= B4800; break;
- /*case 7200: cflag |= B7200; break;*/
- case 9600: cflag |= B9600; break;
- /*case 14400: cflag |= B14400; break;*/
- case 19200: cflag |= B19200; break;
- /*case 28800: cflag |= B28800; break;*/
- case 38400: cflag |= B38400; break;
- /*case 55854: cflag |= B55054; break;*/
- case 57600: cflag |= B57600; break;
- case 115200: cflag |= B115200; break;
- /*case 127117: cflag |= B127117; break;*/
- case 230400: cflag |= B230400; break;
- case 460800: cflag |= B460800; break;
- case 921600: cflag |= B921600; break;
- /*case 3686400: cflag |= B3686400; break;*/
- default:
- dbg("%s - Baud rate is not supported, "
- "using 9600 baud", __FUNCTION__);
- cflag |= B9600;
- cp2101_set_config_single(port, CP2101_BAUDRATE,
- (BAUD_RATE_GEN_FREQ/9600));
- break;
- }
+
+ tty_encode_baud_rate(port->tty, baud, baud);
+ cflag = port->tty->termios->c_cflag;
cp2101_get_config(port, CP2101_BITS, &bits, 2);
cflag &= ~CSIZE;
@@ -516,7 +484,7 @@
static void cp2101_set_termios (struct usb_serial_port *port,
struct ktermios *old_termios)
{
- unsigned int cflag, old_cflag=0;
+ unsigned int cflag, old_cflag;
int baud=0, bits;
unsigned int modem_ctl[4];
@@ -526,6 +494,8 @@
dbg("%s - no tty structures", __FUNCTION__);
return;
}
+ port->tty->termios->c_cflag &= ~CMSPAR;
+
cflag = port->tty->termios->c_cflag;
old_cflag = old_termios->c_cflag;
baud = tty_get_baud_rate(port->tty);
@@ -563,11 +533,15 @@
dbg("%s - Setting baud rate to %d baud", __FUNCTION__,
baud);
if (cp2101_set_config_single(port, CP2101_BAUDRATE,
- (BAUD_RATE_GEN_FREQ / baud)))
+ (BAUD_RATE_GEN_FREQ / baud))) {
dev_err(&port->dev, "Baud rate requested not "
"supported by device\n");
+ baud = tty_termios_baud_rate(old_termios);
+ }
}
}
+ /* Report back the resulting baud rate */
+ tty_encode_baud_rate(port->tty, baud, baud);
/* If the number of data bits is to be updated */
if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index dab2e66..ae410c4 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -973,6 +973,8 @@
}
}
/* set parity */
+ tty->termios->c_cflag &= ~CMSPAR;
+
if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) {
if (cflag&PARENB) {
if (cflag&PARODD)
@@ -1054,15 +1056,15 @@
}
/* set output flow control */
- if ((iflag&IXON) != (old_iflag&IXON)
- || (cflag&CRTSCTS) != (old_cflag&CRTSCTS)) {
+ if ((iflag & IXON) != (old_iflag & IXON)
+ || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
arg = 0;
- if (iflag&IXON)
+ if (iflag & IXON)
arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
else
arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF;
- if (cflag&CRTSCTS) {
+ if (cflag & CRTSCTS) {
arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
} else {
arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
@@ -1076,8 +1078,8 @@
}
/* set receive enable/disable */
- if ((cflag&CREAD) != (old_cflag&CREAD)) {
- if (cflag&CREAD)
+ if ((cflag & CREAD) != (old_cflag & CREAD)) {
+ if (cflag & CREAD)
arg = DIGI_ENABLE;
else
arg = DIGI_DISABLE;
@@ -1089,7 +1091,7 @@
}
if ((ret = digi_write_oob_command(port, buf, i, 1)) != 0)
dbg("digi_set_termios: write oob failed, ret=%d", ret);
-
+ tty_encode_baud_rate(tty, baud, baud);
}
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 050fcc9..a5c8e1e 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -449,14 +449,9 @@
static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
-
+ struct ktermios *termios = port->tty->termios;
dbg("%s - port %d", __FUNCTION__, port->number);
- if ((!port->tty) || (!port->tty->termios)) {
- dbg("%s - no tty structures", __FUNCTION__);
- return;
- }
-
/*
* The empeg-car player wants these particular tty settings.
* You could, for example, change the baud rate, however the
@@ -466,7 +461,7 @@
*
* The default requirements for this device are:
*/
- port->tty->termios->c_iflag
+ termios->c_iflag
&= ~(IGNBRK /* disable ignore break */
| BRKINT /* disable break causes interrupt */
| PARMRK /* disable mark parity errors */
@@ -476,24 +471,23 @@
| ICRNL /* disable translate CR to NL */
| IXON); /* disable enable XON/XOFF flow control */
- port->tty->termios->c_oflag
+ termios->c_oflag
&= ~OPOST; /* disable postprocess output characters */
- port->tty->termios->c_lflag
+ termios->c_lflag
&= ~(ECHO /* disable echo input characters */
| ECHONL /* disable echo new line */
| ICANON /* disable erase, kill, werase, and rprnt special characters */
| ISIG /* disable interrupt, quit, and suspend special characters */
| IEXTEN); /* disable non-POSIX special characters */
- port->tty->termios->c_cflag
+ termios->c_cflag
&= ~(CSIZE /* no size */
| PARENB /* disable parity bit */
| CBAUD); /* clear current baud rate */
- port->tty->termios->c_cflag
- |= (CS8 /* character size 8 bits */
- | B115200); /* baud rate 115200 */
+ termios->c_cflag
+ |= CS8; /* character size 8 bits */
/*
* Force low_latency on; otherwise the pushes are scheduled;
@@ -501,8 +495,7 @@
* on the floor. We don't want to drop bytes on the floor. :)
*/
port->tty->low_latency = 1;
-
- return;
+ tty_encode_baud_rate(port->tty, 115200, 115200);
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8a8a6b9..c40e77d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -294,7 +294,7 @@
__u16 interface; /* FT2232C port interface (0 for FT232/245) */
- int force_baud; /* if non-zero, force the baud rate to this value */
+ speed_t force_baud; /* if non-zero, force the baud rate to this value */
int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */
spinlock_t tx_lock; /* spinlock for transmit state */
@@ -878,6 +878,7 @@
if (div_value == 0) {
dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__, baud);
div_value = ftdi_sio_b9600;
+ baud = 9600;
div_okay = 0;
}
break;
@@ -886,6 +887,7 @@
div_value = ftdi_232am_baud_to_divisor(baud);
} else {
dbg("%s - Baud rate too high!", __FUNCTION__);
+ baud = 9600;
div_value = ftdi_232am_baud_to_divisor(9600);
div_okay = 0;
}
@@ -899,6 +901,7 @@
dbg("%s - Baud rate too high!", __FUNCTION__);
div_value = ftdi_232bm_baud_to_divisor(9600);
div_okay = 0;
+ baud = 9600;
}
break;
} /* priv->chip_type */
@@ -909,6 +912,7 @@
ftdi_chip_name[priv->chip_type]);
}
+ tty_encode_baud_rate(port->tty, baud, baud);
return(div_value);
}
@@ -1263,7 +1267,7 @@
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 77;
- priv->force_baud = B38400;
+ priv->force_baud = 38400;
} /* ftdi_USB_UIRT_setup */
/* Setup for the HE-TIRA1 device, which requires hardwired
@@ -1274,7 +1278,7 @@
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 240;
- priv->force_baud = B38400;
+ priv->force_baud = 38400;
priv->force_rtscts = 1;
} /* ftdi_HE_TIRA1_setup */
@@ -1363,7 +1367,7 @@
/* ftdi_set_termios will send usb control messages */
if (port->tty)
- ftdi_set_termios(port, NULL);
+ ftdi_set_termios(port, port->tty->termios);
/* FIXME: Flow control might be enabled, so it should be checked -
we have no control of defaults! */
@@ -1933,32 +1937,33 @@
static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{ /* ftdi_termios */
struct usb_device *dev = port->serial->dev;
- unsigned int cflag = port->tty->termios->c_cflag;
struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct ktermios *termios = port->tty->termios;
+ unsigned int cflag = termios->c_cflag;
__u16 urb_value; /* will hold the new flags */
char buf[1]; /* Perhaps I should dynamically alloc this? */
// Added for xon/xoff support
- unsigned int iflag = port->tty->termios->c_iflag;
+ unsigned int iflag = termios->c_iflag;
unsigned char vstop;
unsigned char vstart;
dbg("%s", __FUNCTION__);
/* Force baud rate if this device requires it, unless it is set to B0. */
- if (priv->force_baud && ((port->tty->termios->c_cflag & CBAUD) != B0)) {
+ if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
dbg("%s: forcing baud rate for this device", __FUNCTION__);
- port->tty->termios->c_cflag &= ~CBAUD;
- port->tty->termios->c_cflag |= priv->force_baud;
+ tty_encode_baud_rate(port->tty, priv->force_baud,
+ priv->force_baud);
}
/* Force RTS-CTS if this device requires it. */
if (priv->force_rtscts) {
dbg("%s: forcing rtscts for this device", __FUNCTION__);
- port->tty->termios->c_cflag |= CRTSCTS;
+ termios->c_cflag |= CRTSCTS;
}
- cflag = port->tty->termios->c_cflag;
+ cflag = termios->c_cflag;
/* FIXME -For this cut I don't care if the line is really changing or
not - so just do the change regardless - should be able to
@@ -1969,6 +1974,8 @@
/* Set number of data bits, parity, stop bits */
+ termios->c_cflag &= ~CMSPAR;
+
urb_value = 0;
urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 :
FTDI_SIO_SET_DATA_STOP_BITS_1);
@@ -2048,8 +2055,8 @@
// Set the vstart and vstop -- could have been done up above where
// a lot of other dereferencing is done but that would be very
// inefficient as vstart and vstop are not always needed
- vstart=port->tty->termios->c_cc[VSTART];
- vstop=port->tty->termios->c_cc[VSTOP];
+ vstart = termios->c_cc[VSTART];
+ vstop = termios->c_cc[VSTOP];
urb_value=(vstop << 8) | (vstart);
if (usb_control_msg(dev,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 88a2c7d..9eb4a65 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -208,14 +208,15 @@
/* only do something if we have a bulk out endpoint */
if (serial->num_bulk_out) {
- spin_lock_bh(&port->lock);
+ unsigned long flags;
+ spin_lock_irqsave(&port->lock, flags);
if (port->write_urb_busy) {
- spin_unlock_bh(&port->lock);
+ spin_unlock_irqrestore(&port->lock, flags);
dbg("%s - already writing", __FUNCTION__);
return 0;
}
port->write_urb_busy = 1;
- spin_unlock_bh(&port->lock);
+ spin_unlock_irqrestore(&port->lock, flags);
count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 8dd3abc..a5d2e11 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1503,22 +1503,16 @@
*****************************************************************************/
static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
+ /* FIXME: This function appears unused ?? */
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
struct tty_struct *tty = port->tty;
unsigned int cflag;
- if (!port->tty || !port->tty->termios) {
- dbg ("%s - no tty or termios", __FUNCTION__);
- return;
- }
-
cflag = tty->termios->c_cflag;
dbg("%s - clfag %08x iflag %08x", __FUNCTION__,
tty->termios->c_cflag, tty->termios->c_iflag);
- if (old_termios) {
- dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
- old_termios->c_cflag, old_termios->c_iflag);
- }
+ dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
+ old_termios->c_cflag, old_termios->c_iflag);
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -2653,7 +2647,11 @@
dbg("%s - baud rate = %d", __FUNCTION__, baud);
status = send_cmd_write_baud_rate (edge_port, baud);
-
+ if (status == -1) {
+ /* Speed change was not possible - put back the old speed */
+ baud = tty_termios_baud_rate(old_termios);
+ tty_encode_baud_rate(tty, baud, baud);
+ }
return;
}
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 5ab6a0c..6b803ab 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -504,11 +504,6 @@
dbg("%s - port %d", __FUNCTION__, port->number);
- if ((!port->tty) || (!port->tty->termios)) {
- dbg("%s - no tty structures", __FUNCTION__);
- return;
- }
-
baud = tty_get_baud_rate(port->tty);
/*
@@ -531,8 +526,6 @@
default:
ir_baud = SPEED_9600;
baud = 9600;
- /* And once the new tty stuff is all done we need to
- call back to correct the baud bits */
}
if (xbof == -1)
@@ -562,6 +555,10 @@
result = usb_submit_urb (port->write_urb, GFP_KERNEL);
if (result)
dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result);
+
+ /* Only speed changes are supported */
+ tty_termios_copy_hw(port->tty->termios, old_termios);
+ tty_encode_baud_rate(port->tty, baud, baud);
}
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index f2a6fce..6bfdba6 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -278,29 +278,35 @@
struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details;
unsigned int cflag;
+ struct tty_struct *tty = port->tty;
dbg("%s", __FUNCTION__);
p_priv = usb_get_serial_port_data(port);
d_details = p_priv->device_details;
- cflag = port->tty->termios->c_cflag;
+ cflag = tty->termios->c_cflag;
device_port = port->number - port->serial->minor;
/* Baud rate calculation takes baud rate as an integer
so other rates can be generated if desired. */
- baud_rate = tty_get_baud_rate(port->tty);
+ baud_rate = tty_get_baud_rate(tty);
/* If no match or invalid, don't change */
- if (baud_rate >= 0
- && d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
+ if (d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
/* FIXME - more to do here to ensure rate changes cleanly */
+ /* FIXME - calcuate exact rate from divisor ? */
p_priv->baud = baud_rate;
- }
+ } else
+ baud_rate = tty_termios_baud_rate(old_termios);
+ tty_encode_baud_rate(tty, baud_rate, baud_rate);
/* set CTS/RTS handshake etc. */
p_priv->cflag = cflag;
p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none;
+ /* Mark/Space not supported */
+ tty->termios->c_cflag &= ~CMSPAR;
+
keyspan_send_setup(port, 0);
}
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6f22419..aee4502 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -616,8 +616,9 @@
case 1200:
urb_val = SUSBCR_SBR_1200;
break;
- case 9600:
default:
+ speed = 9600;
+ case 9600:
urb_val = SUSBCR_SBR_9600;
break;
}
@@ -641,6 +642,8 @@
urb_val |= SUSBCR_SPASB_NoParity;
strcat(settings, "No Parity");
}
+ port->tty->termios->c_cflag &= ~CMSPAR;
+ tty_encode_baud_rate(port->tty, speed, speed);
result = usb_control_msg( port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0 ),
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index f76480f..a5ced7e 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1977,11 +1977,6 @@
tty = mos7840_port->port->tty;
- if ((!tty) || (!tty->termios)) {
- dbg("%s - no tty structures", __FUNCTION__);
- return;
- }
-
dbg("%s", "Entering .......... \n");
lData = LCR_BITS_8;
@@ -2151,11 +2146,6 @@
tty = port->tty;
- if (!port->tty || !port->tty->termios) {
- dbg("%s - no tty or termios", __FUNCTION__);
- return;
- }
-
if (!mos7840_port->open) {
dbg("%s - port not opened", __FUNCTION__);
return;
@@ -2165,19 +2155,10 @@
cflag = tty->termios->c_cflag;
- if (!cflag) {
- dbg("%s %s\n", __FUNCTION__, "cflag is NULL");
- return;
- }
-
dbg("%s - clfag %08x iflag %08x", __FUNCTION__,
tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
-
- if (old_termios) {
- dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
- old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
- }
-
+ dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
+ old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
dbg("%s - port %d", __FUNCTION__, port->number);
/* change the port settings to the new ones specified */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a18659e..4590124 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -172,6 +172,8 @@
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2110) }, /* Novatel Merlin ES620 / Merlin ES720 / Ovation U720 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4100) }, /* Novatel U727 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4400) }, /* Novatel MC950 */
{ USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
{ USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
{ USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
@@ -311,7 +313,8 @@
struct ktermios *old_termios)
{
dbg("%s", __FUNCTION__);
-
+ /* Doesn't support option setting */
+ tty_termios_copy_hw(port->tty->termios, old_termios);
option_send_setup(port);
}
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1da57fd..2cd3f1d 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -56,6 +56,7 @@
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
+ { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
@@ -470,16 +471,13 @@
dbg("%s - port %d", __FUNCTION__, port->number);
- if ((!port->tty) || (!port->tty->termios)) {
- dbg("%s - no tty structures", __FUNCTION__);
- return;
- }
-
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
*(port->tty->termios) = tty_std_termios;
port->tty->termios->c_cflag = B9600 | CS8 | CREAD |
HUPCL | CLOCAL;
+ port->tty->termios->c_ispeed = 9600;
+ port->tty->termios->c_ospeed = 9600;
priv->termios_initialized = 1;
}
spin_unlock_irqrestore(&priv->lock, flags);
@@ -596,6 +594,10 @@
dbg ("0x40:0x1:0x0:0x0 %d", i);
}
+ /* FIXME: Need to read back resulting baud rate */
+ if (baud)
+ tty_encode_baud_rate(port->tty, baud, baud);
+
kfree(buf);
}
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index c39bace..ed603e3 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -20,6 +20,7 @@
#define IODATA_VENDOR_ID 0x04bb
#define IODATA_PRODUCT_ID 0x0a03
+#define IODATA_PRODUCT_ID_RSAQ5 0x0a0e
#define ELCOM_VENDOR_ID 0x056e
#define ELCOM_PRODUCT_ID 0x5003
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 959b3e4..833f6e1 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -224,7 +224,7 @@
struct ktermios *old_termios)
{
dbg("%s", __FUNCTION__);
-
+ tty_termios_copy_hw(port->tty->termios, old_termios);
sierra_send_setup(port);
}
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4b1bd7d..497e29a 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -429,6 +429,8 @@
/* pass on to the driver specific version of this function if it is available */
if (port->serial->type->set_termios)
port->serial->type->set_termios(port, old);
+ else
+ tty_termios_copy_hw(tty->termios, old);
}
static void serial_break (struct tty_struct *tty, int break_state)
@@ -1121,7 +1123,9 @@
{
struct usb_serial *serial = usb_get_intfdata(intf);
- return serial->type->resume(serial);
+ if (serial->type->resume)
+ return serial->type->resume(serial);
+ return 0;
}
EXPORT_SYMBOL(usb_serial_resume);
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index cc8b44c..ee5dd8b 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -885,16 +885,7 @@
static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios)
{
dbg("%s -port %d", __FUNCTION__, port->number);
-
- if ((!port->tty) || (!port->tty->termios)) {
- dbg("%s - no tty structures", __FUNCTION__);
- goto exit;
- }
-
firm_setup_port(port);
-
-exit:
- return;
}
@@ -1244,6 +1235,8 @@
port_settings.baud = tty_get_baud_rate(port->tty);
dbg("%s - baud rate = %d", __FUNCTION__, port_settings.baud);
+ /* fixme: should set validated settings */
+ tty_encode_baud_rate(port->tty, port_settings.baud, port_settings.baud);
/* handle any settings that aren't specified in the tty structure */
port_settings.lloop = 0;
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index fe2c4cd..7e53333 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -48,7 +48,6 @@
config USB_STORAGE_ISD200
bool "ISD-200 USB/ATA Bridge support"
depends on USB_STORAGE
- depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE
---help---
Say Y here if you want to use USB Mass Store devices based
on the In-Systems Design ISD-200 USB/ATA bridge.
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 93a7724..49ba6c0 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -977,6 +977,109 @@
return(retStatus);
}
+/*
+ * We are the last non IDE user of the legacy IDE ident structures
+ * and we thus want to keep a private copy of this function so the
+ * driver can be used without the obsolete drivers/ide layer
+ */
+
+static void isd200_fix_driveid (struct hd_driveid *id)
+{
+#ifndef __LITTLE_ENDIAN
+# ifdef __BIG_ENDIAN
+ int i;
+ u16 *stringcast;
+
+ id->config = __le16_to_cpu(id->config);
+ id->cyls = __le16_to_cpu(id->cyls);
+ id->reserved2 = __le16_to_cpu(id->reserved2);
+ id->heads = __le16_to_cpu(id->heads);
+ id->track_bytes = __le16_to_cpu(id->track_bytes);
+ id->sector_bytes = __le16_to_cpu(id->sector_bytes);
+ id->sectors = __le16_to_cpu(id->sectors);
+ id->vendor0 = __le16_to_cpu(id->vendor0);
+ id->vendor1 = __le16_to_cpu(id->vendor1);
+ id->vendor2 = __le16_to_cpu(id->vendor2);
+ stringcast = (u16 *)&id->serial_no[0];
+ for (i = 0; i < (20/2); i++)
+ stringcast[i] = __le16_to_cpu(stringcast[i]);
+ id->buf_type = __le16_to_cpu(id->buf_type);
+ id->buf_size = __le16_to_cpu(id->buf_size);
+ id->ecc_bytes = __le16_to_cpu(id->ecc_bytes);
+ stringcast = (u16 *)&id->fw_rev[0];
+ for (i = 0; i < (8/2); i++)
+ stringcast[i] = __le16_to_cpu(stringcast[i]);
+ stringcast = (u16 *)&id->model[0];
+ for (i = 0; i < (40/2); i++)
+ stringcast[i] = __le16_to_cpu(stringcast[i]);
+ id->dword_io = __le16_to_cpu(id->dword_io);
+ id->reserved50 = __le16_to_cpu(id->reserved50);
+ id->field_valid = __le16_to_cpu(id->field_valid);
+ id->cur_cyls = __le16_to_cpu(id->cur_cyls);
+ id->cur_heads = __le16_to_cpu(id->cur_heads);
+ id->cur_sectors = __le16_to_cpu(id->cur_sectors);
+ id->cur_capacity0 = __le16_to_cpu(id->cur_capacity0);
+ id->cur_capacity1 = __le16_to_cpu(id->cur_capacity1);
+ id->lba_capacity = __le32_to_cpu(id->lba_capacity);
+ id->dma_1word = __le16_to_cpu(id->dma_1word);
+ id->dma_mword = __le16_to_cpu(id->dma_mword);
+ id->eide_pio_modes = __le16_to_cpu(id->eide_pio_modes);
+ id->eide_dma_min = __le16_to_cpu(id->eide_dma_min);
+ id->eide_dma_time = __le16_to_cpu(id->eide_dma_time);
+ id->eide_pio = __le16_to_cpu(id->eide_pio);
+ id->eide_pio_iordy = __le16_to_cpu(id->eide_pio_iordy);
+ for (i = 0; i < 2; ++i)
+ id->words69_70[i] = __le16_to_cpu(id->words69_70[i]);
+ for (i = 0; i < 4; ++i)
+ id->words71_74[i] = __le16_to_cpu(id->words71_74[i]);
+ id->queue_depth = __le16_to_cpu(id->queue_depth);
+ for (i = 0; i < 4; ++i)
+ id->words76_79[i] = __le16_to_cpu(id->words76_79[i]);
+ id->major_rev_num = __le16_to_cpu(id->major_rev_num);
+ id->minor_rev_num = __le16_to_cpu(id->minor_rev_num);
+ id->command_set_1 = __le16_to_cpu(id->command_set_1);
+ id->command_set_2 = __le16_to_cpu(id->command_set_2);
+ id->cfsse = __le16_to_cpu(id->cfsse);
+ id->cfs_enable_1 = __le16_to_cpu(id->cfs_enable_1);
+ id->cfs_enable_2 = __le16_to_cpu(id->cfs_enable_2);
+ id->csf_default = __le16_to_cpu(id->csf_default);
+ id->dma_ultra = __le16_to_cpu(id->dma_ultra);
+ id->trseuc = __le16_to_cpu(id->trseuc);
+ id->trsEuc = __le16_to_cpu(id->trsEuc);
+ id->CurAPMvalues = __le16_to_cpu(id->CurAPMvalues);
+ id->mprc = __le16_to_cpu(id->mprc);
+ id->hw_config = __le16_to_cpu(id->hw_config);
+ id->acoustic = __le16_to_cpu(id->acoustic);
+ id->msrqs = __le16_to_cpu(id->msrqs);
+ id->sxfert = __le16_to_cpu(id->sxfert);
+ id->sal = __le16_to_cpu(id->sal);
+ id->spg = __le32_to_cpu(id->spg);
+ id->lba_capacity_2 = __le64_to_cpu(id->lba_capacity_2);
+ for (i = 0; i < 22; i++)
+ id->words104_125[i] = __le16_to_cpu(id->words104_125[i]);
+ id->last_lun = __le16_to_cpu(id->last_lun);
+ id->word127 = __le16_to_cpu(id->word127);
+ id->dlf = __le16_to_cpu(id->dlf);
+ id->csfo = __le16_to_cpu(id->csfo);
+ for (i = 0; i < 26; i++)
+ id->words130_155[i] = __le16_to_cpu(id->words130_155[i]);
+ id->word156 = __le16_to_cpu(id->word156);
+ for (i = 0; i < 3; i++)
+ id->words157_159[i] = __le16_to_cpu(id->words157_159[i]);
+ id->cfa_power = __le16_to_cpu(id->cfa_power);
+ for (i = 0; i < 14; i++)
+ id->words161_175[i] = __le16_to_cpu(id->words161_175[i]);
+ for (i = 0; i < 31; i++)
+ id->words176_205[i] = __le16_to_cpu(id->words176_205[i]);
+ for (i = 0; i < 48; i++)
+ id->words206_254[i] = __le16_to_cpu(id->words206_254[i]);
+ id->integrity_word = __le16_to_cpu(id->integrity_word);
+# else
+# error "Please fix <asm/byteorder.h>"
+# endif
+#endif
+}
+
/**************************************************************************
* isd200_get_inquiry_data
@@ -1018,7 +1121,7 @@
int i;
__be16 *src;
__u16 *dest;
- ide_fix_driveid(id);
+ isd200_fix_driveid(id);
US_DEBUGP(" Identify Data Structure:\n");
US_DEBUGP(" config = 0x%x\n", id->config);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index fb9d8d0..cc4b60f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1509,7 +1509,7 @@
WARNING: Do not use any application that uses the 3D engine
(namely glide) while using this driver.
- Please read the <file:Documentation/fb/README-sstfb.txt> for supported
+ Please read the <file:Documentation/fb/sstfb.txt> for supported
options and other important info support.
config FB_VT8623
@@ -1807,7 +1807,7 @@
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called sm501fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
@@ -1892,9 +1892,7 @@
If unsure, say N.
-if ARCH_OMAP
- source "drivers/video/omap/Kconfig"
-endif
+source "drivers/video/omap/Kconfig"
source "drivers/video/backlight/Kconfig"
source "drivers/video/display/Kconfig"
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index be1d57bf..83ee3e7 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -27,8 +27,6 @@
#include "ati_ids.h"
-static void radeon_reinitialize_M10(struct radeonfb_info *rinfo);
-
/*
* Workarounds for bugs in PC laptops:
* - enable D2 sleep in some IBM Thinkpads
@@ -39,6 +37,8 @@
*/
#if defined(CONFIG_PM) && defined(CONFIG_X86)
+static void radeon_reinitialize_M10(struct radeonfb_info *rinfo);
+
struct radeon_device_id {
const char *ident; /* (arbitrary) Name */
const unsigned short subsystem_vendor; /* Subsystem Vendor ID */
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index f99cb77..f7e2d5a 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -2509,8 +2509,7 @@
cinfo = info->par;
cinfo->btype = btype;
- assert(z > 0);
- assert(z2 >= 0);
+ assert(z);
assert(btype != BT_NONE);
cinfo->zdev = z;
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index f4fcf11..4440885 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -1,6 +1,6 @@
config FB_OMAP
tristate "OMAP frame buffer support (EXPERIMENTAL)"
- depends on FB
+ depends on FB && ARCH_OMAP
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 6854fd6..9adbb4f 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -17,7 +17,8 @@
bool "Userspace communication over connector"
default y
--- help ---
- This allows to communicate with userspace using connector [Documentation/connector].
+ This allows to communicate with userspace using connector. For more
+ information see <file:Documentation/connector/connector.txt>.
There are three types of messages between w1 core and userspace:
1. Events. They are generated each time new master or slave device found
either due to automatic or requested search.
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 81db48f..2792bc1 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -15,8 +15,8 @@
implementation entirely in software (which can sometimes fail to
reboot the machine) and a driver for hardware watchdog boards, which
are more robust and can also keep track of the temperature inside
- your computer. For details, read <file:Documentation/watchdog/watchdog.txt>
- in the kernel source.
+ your computer. For details, read
+ <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
The watchdog is usually used together with the watchdog daemon
which is available from
diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c
index c404fc6..b481cc0e 100644
--- a/drivers/watchdog/alim1535_wdt.c
+++ b/drivers/watchdog/alim1535_wdt.c
@@ -31,7 +31,7 @@
static char ali_expect_release;
static struct pci_dev *ali_pci;
static u32 ali_timeout_bits; /* stores the computed timeout */
-static spinlock_t ali_lock; /* Guards the hardware */
+static DEFINE_SPINLOCK(ali_lock); /* Guards the hardware */
/* module parameters */
static int timeout = WATCHDOG_TIMEOUT;
@@ -398,8 +398,6 @@
{
int ret;
- spin_lock_init(&ali_lock);
-
/* Check whether or not the hardware watchdog is there */
if (ali_find_watchdog() != 0) {
return -ENODEV;
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 19db530..a61cbd4 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -61,7 +61,7 @@
static int heartbeat = DEFAULT_HEARTBEAT;
-static spinlock_t io_lock;
+static DEFINE_SPINLOCK(io_lock);
static unsigned long wdt_status;
#define WDT_IN_USE 0
#define WDT_OK_TO_CLOSE 1
@@ -200,8 +200,6 @@
int ret = 0, size;
struct resource *res;
- spin_lock_init(&io_lock);
-
if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
heartbeat = DEFAULT_HEARTBEAT;
@@ -262,7 +260,7 @@
static void __exit davinci_wdt_exit(void)
{
- return platform_driver_unregister(&platform_wdt_driver);
+ platform_driver_unregister(&platform_wdt_driver);
}
module_init(davinci_wdt_init);
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
index f236954..ca44fd9 100644
--- a/drivers/watchdog/i6300esb.c
+++ b/drivers/watchdog/i6300esb.c
@@ -77,7 +77,7 @@
/* internal variables */
static void __iomem *BASEADDR;
-static spinlock_t esb_lock; /* Guards the hardware */
+static DEFINE_SPINLOCK(esb_lock); /* Guards the hardware */
static unsigned long timer_alive;
static struct pci_dev *esb_pci;
static unsigned short triggered; /* The status of the watchdog upon boot */
@@ -456,8 +456,6 @@
{
int ret;
- spin_lock_init(&esb_lock);
-
/* Check whether or not the hardware watchdog is there */
if (!esb_getdevice () || esb_pci == NULL)
return -ENODEV;
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index cd5a565..a0e6809 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -35,10 +35,12 @@
* 82801GDH (ICH7DH) : document number 307013-002, 307014-009,
* 82801GBM (ICH7-M) : document number 307013-002, 307014-009,
* 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009,
- * 82801HB (ICH8) : document number 313056-002, 313057-004,
- * 82801HR (ICH8R) : document number 313056-002, 313057-004,
- * 82801HH (ICH8DH) : document number 313056-002, 313057-004,
- * 82801HO (ICH8DO) : document number 313056-002, 313057-004,
+ * 82801HB (ICH8) : document number 313056-003, 313057-009,
+ * 82801HR (ICH8R) : document number 313056-003, 313057-009,
+ * 82801HBM (ICH8M) : document number 313056-003, 313057-009,
+ * 82801HH (ICH8DH) : document number 313056-003, 313057-009,
+ * 82801HO (ICH8DO) : document number 313056-003, 313057-009,
+ * 82801HEM (ICH8M-E) : document number 313056-003, 313057-009,
* 82801IB (ICH9) : document number 316972-001, 316973-001,
* 82801IR (ICH9R) : document number 316972-001, 316973-001,
* 82801IH (ICH9DH) : document number 316972-001, 316973-001,
@@ -95,8 +97,10 @@
TCO_ICH7M, /* ICH7-M */
TCO_ICH7MDH, /* ICH7-M DH */
TCO_ICH8, /* ICH8 & ICH8R */
+ TCO_ICH8ME, /* ICH8M-E */
TCO_ICH8DH, /* ICH8DH */
TCO_ICH8DO, /* ICH8DO */
+ TCO_ICH8M, /* ICH8M */
TCO_ICH9, /* ICH9 */
TCO_ICH9R, /* ICH9R */
TCO_ICH9DH, /* ICH9DH */
@@ -125,8 +129,10 @@
{"ICH7-M", 2},
{"ICH7-M DH", 2},
{"ICH8 or ICH8R", 2},
+ {"ICH8M-E", 2},
{"ICH8DH", 2},
{"ICH8DO", 2},
+ {"ICH8M", 2},
{"ICH9", 2},
{"ICH9R", 2},
{"ICH9DH", 2},
@@ -134,6 +140,15 @@
{NULL,0}
};
+#define ITCO_PCI_DEVICE(dev, data) \
+ .vendor = PCI_VENDOR_ID_INTEL, \
+ .device = dev, \
+ .subvendor = PCI_ANY_ID, \
+ .subdevice = PCI_ANY_ID, \
+ .class = 0, \
+ .class_mask = 0, \
+ .driver_data = data
+
/*
* This data only exists for exporting the supported PCI ids
* via MODULE_DEVICE_TABLE. We do not actually register a
@@ -141,45 +156,47 @@
* functions that probably will be registered by other drivers.
*/
static struct pci_device_id iTCO_wdt_pci_tbl[] = {
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH0 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2M },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3M },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4M },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_CICH },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH5 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_6300ESB },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6M },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6W },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DH },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DO },
- { PCI_VENDOR_ID_INTEL, 0x2918, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH9 },
- { PCI_VENDOR_ID_INTEL, 0x2916, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH9R },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH9DH },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2671, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2672, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2673, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2674, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2675, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2676, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2677, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2678, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x2679, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x267a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x267b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x267c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x267d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x267e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
- { PCI_VENDOR_ID_INTEL, 0x267f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB },
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0, TCO_ICH )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0, TCO_ICH0 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0, TCO_ICH2 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10, TCO_ICH2M )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0, TCO_ICH3 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12, TCO_ICH3M )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0, TCO_ICH4 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12, TCO_ICH4M )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0, TCO_CICH )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0, TCO_ICH5 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB_1, TCO_6300ESB)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8 )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M )},
+ { ITCO_PCI_DEVICE(0x2918, TCO_ICH9 )},
+ { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2673, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2674, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2675, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2676, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2677, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2678, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2679, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267a, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267b, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267c, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267d, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267e, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267f, TCO_631XESB)},
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl);
@@ -300,6 +317,7 @@
/* disable chipset's NO_REBOOT bit */
if (iTCO_wdt_unset_NO_REBOOT_bit()) {
+ spin_unlock(&iTCO_wdt_private.io_lock);
printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
return -EIO;
}
@@ -590,7 +608,7 @@
* Init & exit routines
*/
-static int iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, struct platform_device *dev)
+static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, struct platform_device *dev)
{
int ret;
u32 base_address;
@@ -694,7 +712,7 @@
return ret;
}
-static void iTCO_wdt_cleanup(void)
+static void __devexit iTCO_wdt_cleanup(void)
{
/* Stop the timer before we leave */
if (!nowayout)
@@ -709,7 +727,7 @@
iTCO_wdt_private.ACPIBASE = 0;
}
-static int iTCO_wdt_probe(struct platform_device *dev)
+static int __devinit iTCO_wdt_probe(struct platform_device *dev)
{
int found = 0;
struct pci_dev *pdev = NULL;
@@ -735,7 +753,7 @@
return 0;
}
-static int iTCO_wdt_remove(struct platform_device *dev)
+static int __devexit iTCO_wdt_remove(struct platform_device *dev)
{
if (iTCO_wdt_private.ACPIBASE)
iTCO_wdt_cleanup();
@@ -753,7 +771,7 @@
static struct platform_driver iTCO_wdt_driver = {
.probe = iTCO_wdt_probe,
- .remove = iTCO_wdt_remove,
+ .remove = __devexit_p(iTCO_wdt_remove),
.shutdown = iTCO_wdt_shutdown,
.suspend = iTCO_wdt_suspend,
.resume = iTCO_wdt_resume,
diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c
index c3a60f5..4b89f40 100644
--- a/drivers/watchdog/ib700wdt.c
+++ b/drivers/watchdog/ib700wdt.c
@@ -48,7 +48,7 @@
static struct platform_device *ibwdt_platform_device;
static unsigned long ibwdt_is_open;
-static spinlock_t ibwdt_lock;
+static DEFINE_SPINLOCK(ibwdt_lock);
static char expect_close;
/* Module information */
@@ -308,8 +308,6 @@
{
int res;
- spin_lock_init(&ibwdt_lock);
-
#if WDT_START != WDT_STOP
if (!request_region(WDT_STOP, 1, "IB700 WDT")) {
printk (KERN_ERR PFX "STOP method I/O %X is not available.\n", WDT_STOP);
diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c
index 6d35bb1..e6e07b4 100644
--- a/drivers/watchdog/machzwd.c
+++ b/drivers/watchdog/machzwd.c
@@ -123,8 +123,8 @@
static int zf_action = GEN_RESET;
static unsigned long zf_is_open;
static char zf_expect_close;
-static spinlock_t zf_lock;
-static spinlock_t zf_port_lock;
+static DEFINE_SPINLOCK(zf_lock);
+static DEFINE_SPINLOCK(zf_port_lock);
static DEFINE_TIMER(zf_timer, zf_ping, 0, 0);
static unsigned long next_heartbeat = 0;
@@ -438,9 +438,6 @@
zf_show_action(action);
- spin_lock_init(&zf_lock);
- spin_lock_init(&zf_port_lock);
-
if(!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")){
printk(KERN_ERR "cannot reserve I/O ports at %d\n",
ZF_IOBASE);
diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c
index a0bf95f..6369f56 100644
--- a/drivers/watchdog/mpc83xx_wdt.c
+++ b/drivers/watchdog/mpc83xx_wdt.c
@@ -56,7 +56,7 @@
static unsigned int timeout_sec;
static unsigned long wdt_is_open;
-static spinlock_t wdt_spinlock;
+static DEFINE_SPINLOCK(wdt_spinlock);
static void mpc83xx_wdt_keepalive(void)
{
@@ -185,9 +185,6 @@
printk(KERN_INFO "WDT driver for MPC83xx initialized. "
"mode:%s timeout=%d (%d seconds)\n",
reset ? "reset":"interrupt", timeout, timeout_sec);
-
- spin_lock_init(&wdt_spinlock);
-
return 0;
err_unmap:
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index 3d3deae..15e4f88 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -61,7 +61,7 @@
static char expect_close; /* is the close expected? */
-static spinlock_t io_lock; /* to guard the watchdog from io races */
+static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */
static int nowayout = WATCHDOG_NOWAYOUT;
@@ -561,8 +561,6 @@
{
int ret;
- spin_lock_init(&io_lock);
-
printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n", WDT_INDEX_IO_PORT);
/* request_region(io, 2, "pc87413"); */
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 22f8873..b04aa09 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -80,7 +80,7 @@
static int nowayout = WATCHDOG_NOWAYOUT;
static int heartbeat = DEFAULT_HEARTBEAT;
-static spinlock_t io_lock;
+static DEFINE_SPINLOCK(io_lock);
static unsigned long wdt_status;
#define WDT_IN_USE 0
#define WDT_OK_TO_CLOSE 1
@@ -254,8 +254,6 @@
int ret = 0, size;
struct resource *res;
- spin_lock_init(&io_lock);
-
if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
heartbeat = DEFAULT_HEARTBEAT;
@@ -335,7 +333,7 @@
static void __exit pnx4008_wdt_exit(void)
{
- return platform_driver_unregister(&platform_wdt_driver);
+ platform_driver_unregister(&platform_wdt_driver);
}
module_init(pnx4008_wdt_init);
diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c
index 285d852..2ee2677 100644
--- a/drivers/watchdog/sbc8360.c
+++ b/drivers/watchdog/sbc8360.c
@@ -54,7 +54,7 @@
#include <asm/system.h>
static unsigned long sbc8360_is_open;
-static spinlock_t sbc8360_lock;
+static DEFINE_SPINLOCK(sbc8360_lock);
static char expect_close;
#define PFX "sbc8360: "
@@ -359,7 +359,6 @@
goto out_noreboot;
}
- spin_lock_init(&sbc8360_lock);
res = misc_register(&sbc8360_miscdev);
if (res) {
printk(KERN_ERR PFX "failed to register misc device\n");
diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c
index 9670d47..32ccd7c 100644
--- a/drivers/watchdog/sc1200wdt.c
+++ b/drivers/watchdog/sc1200wdt.c
@@ -74,7 +74,7 @@
static int io_len = 2; /* for non plug and play */
static struct semaphore open_sem;
static char expect_close;
-static spinlock_t sc1200wdt_lock; /* io port access serialisation */
+static DEFINE_SPINLOCK(sc1200wdt_lock); /* io port access serialisation */
#if defined CONFIG_PNP
static int isapnp = 1;
@@ -375,7 +375,6 @@
printk("%s\n", banner);
- spin_lock_init(&sc1200wdt_lock);
sema_init(&open_sem, 1);
#if defined CONFIG_PNP
diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c
index e8594c6..2847324 100644
--- a/drivers/watchdog/sc520_wdt.c
+++ b/drivers/watchdog/sc520_wdt.c
@@ -125,7 +125,7 @@
static unsigned long next_heartbeat;
static unsigned long wdt_is_open;
static char wdt_expect_close;
-static spinlock_t wdt_spinlock;
+static DEFINE_SPINLOCK(wdt_spinlock);
/*
* Whack the dog
@@ -383,8 +383,6 @@
{
int rc = -EBUSY;
- spin_lock_init(&wdt_spinlock);
-
/* Check that the timeout value is within it's range ; if not reset to the default */
if (wdt_set_heartbeat(timeout)) {
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index d3cb0a7..5d2b5ba 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -83,7 +83,7 @@
static char expect_close; /* is the close expected? */
-static spinlock_t io_lock; /* to guard the watchdog from io races */
+static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */
static int nowayout = WATCHDOG_NOWAYOUT;
@@ -540,8 +540,6 @@
{
int ret;
- spin_lock_init(&io_lock);
-
printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n");
if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) {
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index df33b3b..3864928 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -48,7 +48,7 @@
static unsigned long wdt_is_open;
static char expect_close;
-static spinlock_t io_lock;
+static DEFINE_SPINLOCK(io_lock);
/* You must set this - there is no sane way to probe for this board. */
static int wdt_io = 0x2E;
@@ -328,8 +328,6 @@
{
int ret;
- spin_lock_init(&io_lock);
-
printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.\n");
if (wdt_set_heartbeat(timeout)) {
diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c
index 51826c2..c622a0e 100644
--- a/drivers/watchdog/w83697hf_wdt.c
+++ b/drivers/watchdog/w83697hf_wdt.c
@@ -47,7 +47,7 @@
static unsigned long wdt_is_open;
static char expect_close;
-static spinlock_t io_lock;
+static DEFINE_SPINLOCK(io_lock);
/* You must set this - there is no sane way to probe for this board. */
static int wdt_io = 0x2e;
@@ -376,8 +376,6 @@
{
int ret, i, found = 0;
- spin_lock_init(&io_lock);
-
printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n");
if (wdt_io == 0) {
diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c
index 3c88fe1..bcc9d48 100644
--- a/drivers/watchdog/w83877f_wdt.c
+++ b/drivers/watchdog/w83877f_wdt.c
@@ -94,7 +94,7 @@
static unsigned long next_heartbeat;
static unsigned long wdt_is_open;
static char wdt_expect_close;
-static spinlock_t wdt_spinlock;
+static DEFINE_SPINLOCK(wdt_spinlock);
/*
* Whack the dog
@@ -350,8 +350,6 @@
{
int rc = -EBUSY;
- spin_lock_init(&wdt_spinlock);
-
if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */
{
timeout = WATCHDOG_TIMEOUT;
diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c
index 1579684..b475529 100644
--- a/drivers/watchdog/w83977f_wdt.c
+++ b/drivers/watchdog/w83977f_wdt.c
@@ -50,7 +50,7 @@
static unsigned long timer_alive;
static int testmode;
static char expect_close;
-static spinlock_t spinlock;
+static DEFINE_SPINLOCK(spinlock);
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (15..7635), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
@@ -476,8 +476,6 @@
printk(KERN_INFO PFX DRIVER_VERSION);
- spin_lock_init(&spinlock);
-
/*
* Check that the timeout value is within it's range ;
* if not reset to the default
diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c
index 950905d..9e36809 100644
--- a/drivers/watchdog/wafer5823wdt.c
+++ b/drivers/watchdog/wafer5823wdt.c
@@ -45,7 +45,7 @@
static unsigned long wafwdt_is_open;
static char expect_close;
-static spinlock_t wafwdt_lock;
+static DEFINE_SPINLOCK(wafwdt_lock);
/*
* You must set these - there is no sane way to probe for this board.
@@ -252,8 +252,6 @@
printk(KERN_INFO "WDT driver for Wafer 5823 single board computer initialising.\n");
- spin_lock_init(&wafwdt_lock);
-
if (timeout < 1 || timeout > 255) {
timeout = WD_TIMO;
printk (KERN_INFO PFX "timeout value must be 1<=x<=255, using %d\n",
diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
index 0a3de6a..53d0bb4 100644
--- a/drivers/watchdog/wdt.c
+++ b/drivers/watchdog/wdt.c
@@ -253,7 +253,7 @@
printk(KERN_CRIT "Possible fan fault.\n");
}
#endif /* CONFIG_WDT_501 */
- if (!(status & WDC_SR_WCCR))
+ if (!(status & WDC_SR_WCCR)) {
#ifdef SOFTWARE_REBOOT
#ifdef ONLY_TESTING
printk(KERN_CRIT "Would Reboot.\n");
@@ -264,6 +264,7 @@
#else
printk(KERN_CRIT "Reset in 5ms.\n");
#endif
+ }
return IRQ_HANDLED;
}
diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c
index 7d300ff..9b7f6b6 100644
--- a/drivers/watchdog/wdt977.c
+++ b/drivers/watchdog/wdt977.c
@@ -59,7 +59,7 @@
static unsigned long timer_alive;
static int testmode;
static char expect_close;
-static spinlock_t spinlock;
+static DEFINE_SPINLOCK(spinlock);
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (60..15300), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
@@ -448,8 +448,6 @@
printk(KERN_INFO PFX DRIVER_VERSION);
- spin_lock_init(&spinlock);
-
/* Check that the timeout value is within it's range ; if not reset to the default */
if (wdt977_set_timeout(timeout))
{
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index 6baf4ae..1355608 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -74,7 +74,7 @@
static int dev_count;
static struct semaphore open_sem;
-static spinlock_t wdtpci_lock;
+static DEFINE_SPINLOCK(wdtpci_lock);
static char expect_close;
static int io;
@@ -298,7 +298,7 @@
printk(KERN_CRIT PFX "Possible fan fault.\n");
}
#endif /* CONFIG_WDT_501_PCI */
- if (!(status&WDC_SR_WCCR))
+ if (!(status&WDC_SR_WCCR)) {
#ifdef SOFTWARE_REBOOT
#ifdef ONLY_TESTING
printk(KERN_CRIT PFX "Would Reboot.\n");
@@ -309,6 +309,7 @@
#else
printk(KERN_CRIT PFX "Reset in 5ms.\n");
#endif
+ }
return IRQ_HANDLED;
}
@@ -606,7 +607,6 @@
}
sema_init(&open_sem, 1);
- spin_lock_init(&wdtpci_lock);
irq = dev->irq;
io = pci_resource_start (dev, 2);
diff --git a/fs/Kconfig b/fs/Kconfig
index cc28a69..c75c954 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -504,7 +504,7 @@
including multiple file events, one-shot support, and unmount
notification.
- For more information, see Documentation/filesystems/inotify.txt
+ For more information, see <file:Documentation/filesystems/inotify.txt>
If unsure, say Y.
@@ -518,7 +518,7 @@
directories via a single open fd. Events are read from the file
descriptor, which is also select()- and poll()-able.
- For more information, see Documentation/filesystems/inotify.txt
+ For more information, see <file:Documentation/filesystems/inotify.txt>
If unsure, say Y.
@@ -1089,7 +1089,7 @@
depends on EXPERIMENTAL && KEYS && CRYPTO && NET
help
Encrypted filesystem that operates on the VFS layer. See
- <file:Documentation/ecryptfs.txt> to learn more about
+ <file:Documentation/filesystems/ecryptfs.txt> to learn more about
eCryptfs. Userspace components are required and can be
obtained from <http://ecryptfs.sf.net>.
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index a4284cc..bd26e4c 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -322,7 +322,7 @@
int err;
uifr = compat_alloc_user_space(sizeof(struct ifreq));
- if (copy_in_user(uifr, compat_ptr(arg), sizeof(struct ifreq32)));
+ if (copy_in_user(uifr, compat_ptr(arg), sizeof(struct ifreq32)))
return -EFAULT;
err = sys_ioctl(fd, SIOCGIFNAME, (unsigned long)uifr);
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 0a9882e..9d70289 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -279,13 +279,13 @@
int offset;
int remainder_of_page;
+ sg_init_table(sg, sg_size);
+
while (size > 0 && i < sg_size) {
pg = virt_to_page(addr);
offset = offset_in_page(addr);
- if (sg) {
- sg_set_page(&sg[i], pg);
- sg[i].offset = offset;
- }
+ if (sg)
+ sg_set_page(&sg[i], pg, 0, offset);
remainder_of_page = PAGE_CACHE_SIZE - offset;
if (size >= remainder_of_page) {
if (sg)
@@ -716,12 +716,8 @@
sg_init_table(&src_sg, 1);
sg_init_table(&dst_sg, 1);
- sg_set_page(&src_sg, src_page);
- src_sg.offset = src_offset;
- src_sg.length = size;
- sg_set_page(&dst_sg, dst_page);
- dst_sg.offset = dst_offset;
- dst_sg.length = size;
+ sg_set_page(&src_sg, src_page, size, src_offset);
+ sg_set_page(&dst_sg, dst_page, size, dst_offset);
return encrypt_scatterlist(crypt_stat, &dst_sg, &src_sg, size, iv);
}
@@ -746,14 +742,11 @@
struct scatterlist src_sg, dst_sg;
sg_init_table(&src_sg, 1);
- sg_init_table(&dst_sg, 1);
+ sg_set_page(&src_sg, src_page, size, src_offset);
- sg_set_page(&src_sg, src_page);
- src_sg.offset = src_offset;
- src_sg.length = size;
- sg_set_page(&dst_sg, dst_page);
- dst_sg.offset = dst_offset;
- dst_sg.length = size;
+ sg_init_table(&dst_sg, 1);
+ sg_set_page(&dst_sg, dst_page, size, dst_offset);
+
return decrypt_scatterlist(crypt_stat, &dst_sg, &src_sg, size, iv);
}
diff --git a/fs/jffs2/acl.c b/fs/jffs2/acl.c
index 9728614..77fc583 100644
--- a/fs/jffs2/acl.c
+++ b/fs/jffs2/acl.c
@@ -372,7 +372,7 @@
return rc;
}
- return rc;
+ return 0;
}
void jffs2_clear_acl(struct jffs2_inode_info *f)
diff --git a/fs/locks.c b/fs/locks.c
index 0127a28..8b8388e 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -696,17 +696,28 @@
* Note: the above assumption may not be true when handling lock requests
* from a broken NFS client. But broken NFS clients have a lot more to
* worry about than proper deadlock detection anyway... --okir
+ *
+ * However, the failure of this assumption (also possible in the case of
+ * multiple tasks sharing the same open file table) also means there's no
+ * guarantee that the loop below will terminate. As a hack, we give up
+ * after a few iterations.
*/
+
+#define MAX_DEADLK_ITERATIONS 10
+
static int posix_locks_deadlock(struct file_lock *caller_fl,
struct file_lock *block_fl)
{
struct file_lock *fl;
+ int i = 0;
next_task:
if (posix_same_owner(caller_fl, block_fl))
return 1;
list_for_each_entry(fl, &blocked_list, fl_link) {
if (posix_same_owner(fl, block_fl)) {
+ if (i++ > MAX_DEADLK_ITERATIONS)
+ return 0;
fl = fl->fl_next;
block_fl = fl;
goto next_task;
diff --git a/fs/mbcache.c b/fs/mbcache.c
index 1046cbe..eb31b73 100644
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -403,9 +403,9 @@
{
struct mb_cache_entry *ce;
- atomic_inc(&cache->c_entry_count);
ce = kmem_cache_alloc(cache->c_entry_cache, GFP_KERNEL);
if (ce) {
+ atomic_inc(&cache->c_entry_count);
INIT_LIST_HEAD(&ce->e_lru_list);
INIT_LIST_HEAD(&ce->e_block_list);
ce->e_cache = cache;
diff --git a/fs/ntfs/aops.c b/fs/ntfs/aops.c
index cfdc790..ad87cb0 100644
--- a/fs/ntfs/aops.c
+++ b/fs/ntfs/aops.c
@@ -405,6 +405,15 @@
retry_readpage:
BUG_ON(!PageLocked(page));
+ vi = page->mapping->host;
+ i_size = i_size_read(vi);
+ /* Is the page fully outside i_size? (truncate in progress) */
+ if (unlikely(page->index >= (i_size + PAGE_CACHE_SIZE - 1) >>
+ PAGE_CACHE_SHIFT)) {
+ zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0);
+ ntfs_debug("Read outside i_size - truncated?");
+ goto done;
+ }
/*
* This can potentially happen because we clear PageUptodate() during
* ntfs_writepage() of MstProtected() attributes.
@@ -413,7 +422,6 @@
unlock_page(page);
return 0;
}
- vi = page->mapping->host;
ni = NTFS_I(vi);
/*
* Only $DATA attributes can be encrypted and only unnamed $DATA
diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c
index 92dabdc..50d3b0c 100644
--- a/fs/ntfs/attrib.c
+++ b/fs/ntfs/attrib.c
@@ -179,10 +179,7 @@
* ntfs_mapping_pairs_decompress() fails.
*/
end_vcn = sle64_to_cpu(a->data.non_resident.highest_vcn) + 1;
- if (!a->data.non_resident.lowest_vcn && end_vcn == 1)
- end_vcn = sle64_to_cpu(a->data.non_resident.allocated_size) >>
- ni->vol->cluster_size_bits;
- if (unlikely(vcn >= end_vcn)) {
+ if (unlikely(vcn && vcn >= end_vcn)) {
err = -ENOENT;
goto err_out;
}
diff --git a/fs/ntfs/compress.c b/fs/ntfs/compress.c
index d98daf5..d1619d0 100644
--- a/fs/ntfs/compress.c
+++ b/fs/ntfs/compress.c
@@ -561,6 +561,16 @@
read_unlock_irqrestore(&ni->size_lock, flags);
max_page = ((i_size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT) -
offset;
+ /* Is the page fully outside i_size? (truncate in progress) */
+ if (xpage >= max_page) {
+ kfree(bhs);
+ kfree(pages);
+ zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0);
+ ntfs_debug("Compressed read outside i_size - truncated?");
+ SetPageUptodate(page);
+ unlock_page(page);
+ return 0;
+ }
if (nr_pages < max_page)
max_page = nr_pages;
for (i = 0; i < max_page; i++, offset++) {
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 63c95af..eba339ec 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -358,7 +358,8 @@
}
utime = (clock_t)temp;
- return clock_t_to_cputime(utime);
+ p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime));
+ return p->prev_utime;
}
static cputime_t task_stime(struct task_struct *p)
@@ -373,7 +374,8 @@
stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
cputime_to_clock_t(task_utime(p));
- return clock_t_to_cputime(stime);
+ p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
+ return p->prev_stime;
}
#endif
diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c
index 2e91fb7..749def0 100644
--- a/fs/proc/proc_net.c
+++ b/fs/proc/proc_net.c
@@ -185,7 +185,7 @@
kfree(net->proc_net_root);
}
-struct pernet_operations __net_initdata proc_net_ns_ops = {
+static struct pernet_operations proc_net_ns_ops = {
.init = proc_net_ns_init,
.exit = proc_net_ns_exit,
};
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 680c429..4e57fcf 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -171,7 +171,8 @@
struct dentry *dentry = filp->f_dentry;
struct ctl_table_header *head;
struct ctl_table *table;
- ssize_t error, res;
+ ssize_t error;
+ size_t res;
table = do_proc_sys_lookup(dentry->d_parent, &dentry->d_name, &head);
/* Has the sysctl entry disappeared on us? */
@@ -209,7 +210,8 @@
struct dentry *dentry = filp->f_dentry;
struct ctl_table_header *head;
struct ctl_table *table;
- ssize_t error, res;
+ ssize_t error;
+ size_t res;
table = do_proc_sys_lookup(dentry->d_parent, &dentry->d_name, &head);
/* Has the sysctl entry disappeared on us? */
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 7a8ce9e..3371629 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -132,7 +132,7 @@
* RETURNS:
* Pointer to @sd on success, NULL on failure.
*/
-struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd)
+static struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd)
{
if (unlikely(!sd))
return NULL;
@@ -161,7 +161,7 @@
* Put an active reference to @sd. This function is noop if @sd
* is NULL.
*/
-void sysfs_put_active(struct sysfs_dirent *sd)
+static void sysfs_put_active(struct sysfs_dirent *sd)
{
struct completion *cmpl;
int v;
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index f841798..ff17f8d 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -103,8 +103,6 @@
extern const struct inode_operations sysfs_dir_inode_operations;
struct dentry *sysfs_get_dentry(struct sysfs_dirent *sd);
-struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd);
-void sysfs_put_active(struct sysfs_dirent *sd);
struct sysfs_dirent *sysfs_get_active_two(struct sysfs_dirent *sd);
void sysfs_put_active_two(struct sysfs_dirent *sd);
void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt,
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 584cf12..c78c04f 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -933,20 +933,19 @@
goto again;
}
- /* Set sbi->s_flags here, used by ufs_get_fs_state() below */
- sbi->s_flags = flags;
+ sbi->s_flags = flags;/*after that line some functions use s_flags*/
ufs_print_super_stuff(sb, usb1, usb2, usb3);
/*
* Check, if file system was correctly unmounted.
* If not, make it read only.
*/
- if ((((flags & UFS_ST_MASK) == UFS_ST_44BSD) ||
- ((flags & UFS_ST_MASK) == UFS_ST_OLD) ||
- ((flags & UFS_ST_MASK) == UFS_ST_SUN) ||
- ((flags & UFS_ST_MASK) == UFS_ST_SUNOS) ||
- ((flags & UFS_ST_MASK) == UFS_ST_SUNx86)) &&
- (ufs_get_fs_state(sb, usb1, usb3) == (UFS_FSOK - fs32_to_cpu(sb, usb1->fs_time)))) {
+ if (((flags & UFS_ST_MASK) == UFS_ST_44BSD) ||
+ ((flags & UFS_ST_MASK) == UFS_ST_OLD) ||
+ (((flags & UFS_ST_MASK) == UFS_ST_SUN ||
+ (flags & UFS_ST_MASK) == UFS_ST_SUNOS ||
+ (flags & UFS_ST_MASK) == UFS_ST_SUNx86) &&
+ (ufs_get_fs_state(sb, usb1, usb3) == (UFS_FSOK - fs32_to_cpu(sb, usb1->fs_time))))) {
switch(usb1->fs_clean) {
case UFS_FSCLEAN:
UFSD("fs is clean\n");
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 7b74b60..19c3ead 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -168,8 +168,7 @@
u32 power_manageable:1;
u32 performance_manageable:1;
u32 wake_capable:1; /* Wakeup(_PRW) supported? */
- u32 force_power_state:1;
- u32 reserved:19;
+ u32 reserved:20;
};
/* File System */
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index d96b10f..c0d7075 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -130,4 +130,7 @@
extern u8 at91_leds_timer;
extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+/* FIXME: this needs a better location, but gets stuff building again */
+extern int at91_suspend_entering_slow_clock(void);
+
#endif
diff --git a/include/asm-arm/arch-davinci/gpio.h b/include/asm-arm/arch-davinci/gpio.h
index ea24a0e..ff8de30 100644
--- a/include/asm-arm/arch-davinci/gpio.h
+++ b/include/asm-arm/arch-davinci/gpio.h
@@ -13,6 +13,9 @@
#ifndef __DAVINCI_GPIO_H
#define __DAVINCI_GPIO_H
+#include <linux/io.h>
+#include <asm/hardware.h>
+
/*
* basic gpio routines
*
diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h
index 7513c7a..822a27c 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa300.h
+++ b/include/asm-arm/arch-pxa/mfp-pxa300.h
@@ -4,7 +4,7 @@
* PXA300/PXA310 specific MFP configuration definitions
*
* Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h
index ae8ba34..488a5bb 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa320.h
+++ b/include/asm-arm/arch-pxa/mfp-pxa320.h
@@ -4,7 +4,7 @@
* PXA320 specific MFP configuration definitions
*
* Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h
index 6029174..ac4157a 100644
--- a/include/asm-arm/arch-pxa/mfp.h
+++ b/include/asm-arm/arch-pxa/mfp.h
@@ -5,7 +5,7 @@
*
* Copyright (C) 2007 Marvell International Ltd.
*
- * 2007-8-21: eric miao <eric.y.miao@gmail.com>
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/asm-arm/flat.h b/include/asm-arm/flat.h
index 16f5375..9918aa4 100644
--- a/include/asm-arm/flat.h
+++ b/include/asm-arm/flat.h
@@ -11,8 +11,9 @@
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags) get_unaligned(rp)
+#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp)
#define flat_get_relocate_addr(rel) (rel)
+#define flat_set_persistent(relval, p) 0
#endif /* __ARM_FLAT_H__ */
diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h
index b824d37..d742205 100644
--- a/include/asm-arm/plat-s3c/regs-nand.h
+++ b/include/asm-arm/plat-s3c/regs-nand.h
@@ -35,7 +35,7 @@
#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28)
#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C)
#define S3C2440_NFMECC1 S3C2410_NFREG(0x30)
-#define S3C2440_NFSECC S3C24E10_NFREG(0x34)
+#define S3C2440_NFSECC S3C2410_NFREG(0x34)
#define S3C2440_NFSBLK S3C2410_NFREG(0x38)
#define S3C2440_NFEBLK S3C2410_NFREG(0x3C)
diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h
index a713163..57dc672 100644
--- a/include/asm-avr32/dma-mapping.h
+++ b/include/asm-avr32/dma-mapping.h
@@ -3,7 +3,7 @@
#include <linux/mm.h>
#include <linux/device.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <asm/processor.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index 14cb8d3..0212e18 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -80,6 +80,7 @@
extern int atomic_ior32(void);
extern int atomic_and32(void);
extern int atomic_xor32(void);
+extern void safe_user_instruction(void);
extern void sigreturn_stub(void);
extern void *l1_data_A_sram_alloc(size_t);
diff --git a/include/asm-blackfin/fixed_code.h b/include/asm-blackfin/fixed_code.h
index e6df84e..37db66c 100644
--- a/include/asm-blackfin/fixed_code.h
+++ b/include/asm-blackfin/fixed_code.h
@@ -17,4 +17,6 @@
#define ATOMIC_SEQS_END 0x480
-#define FIXED_CODE_END 0x480
+#define SAFE_USER_INSTRUCTION 0x480
+
+#define FIXED_CODE_END 0x490
diff --git a/include/asm-blackfin/gptimers.h b/include/asm-blackfin/gptimers.h
index c97ab03..8265ea4 100644
--- a/include/asm-blackfin/gptimers.h
+++ b/include/asm-blackfin/gptimers.h
@@ -197,6 +197,8 @@
uint32_t get_gptimer_count (int timer_id);
uint16_t get_gptimer_intr (int timer_id);
void clear_gptimer_intr (int timer_id);
+uint16_t get_gptimer_over (int timer_id);
+void clear_gptimer_over (int timer_id);
void set_gptimer_config (int timer_id, uint16_t config);
uint16_t get_gptimer_config (int timer_id);
void set_gptimer_pulse_hi (int timer_id);
diff --git a/include/asm-blackfin/mach-bf527/defBF52x_base.h b/include/asm-blackfin/mach-bf527/defBF52x_base.h
index d6c24c54..fc69cf9 100644
--- a/include/asm-blackfin/mach-bf527/defBF52x_base.h
+++ b/include/asm-blackfin/mach-bf527/defBF52x_base.h
@@ -1718,55 +1718,55 @@
/* Bit masks for HOST_CONTROL */
-#define HOST_EN 0x1 /* Host Enable */
-#define nHOST_EN 0x0
-#define HOST_END 0x2 /* Host Endianess */
-#define nHOST_END 0x0
-#define DATA_SIZE 0x4 /* Data Size */
-#define nDATA_SIZE 0x0
-#define HOST_RST 0x8 /* Host Reset */
-#define nHOST_RST 0x0
-#define HRDY_OVR 0x20 /* Host Ready Override */
-#define nHRDY_OVR 0x0
-#define INT_MODE 0x40 /* Interrupt Mode */
-#define nINT_MODE 0x0
-#define BT_EN 0x80 /* Bus Timeout Enable */
-#define nBT_EN 0x0
-#define EHW 0x100 /* Enable Host Write */
-#define nEHW 0x0
-#define EHR 0x200 /* Enable Host Read */
-#define nEHR 0x0
-#define BDR 0x400 /* Burst DMA Requests */
-#define nBDR 0x0
+#define HOST_CNTR_HOST_EN 0x1 /* Host Enable */
+#define HOST_CNTR_nHOST_EN 0x0
+#define HOST_CNTR_HOST_END 0x2 /* Host Endianess */
+#define HOST_CNTR_nHOST_END 0x0
+#define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */
+#define HOST_CNTR_nDATA_SIZE 0x0
+#define HOST_CNTR_HOST_RST 0x8 /* Host Reset */
+#define HOST_CNTR_nHOST_RST 0x0
+#define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */
+#define HOST_CNTR_nHRDY_OVR 0x0
+#define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */
+#define HOST_CNTR_nINT_MODE 0x0
+#define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */
+#define HOST_CNTR_ nBT_EN 0x0
+#define HOST_CNTR_EHW 0x100 /* Enable Host Write */
+#define HOST_CNTR_nEHW 0x0
+#define HOST_CNTR_EHR 0x200 /* Enable Host Read */
+#define HOST_CNTR_nEHR 0x0
+#define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */
+#define HOST_CNTR_nBDR 0x0
/* Bit masks for HOST_STATUS */
-#define READY 0x1 /* DMA Ready */
-#define nREADY 0x0
-#define FIFOFULL 0x2 /* FIFO Full */
-#define nFIFOFULL 0x0
-#define FIFOEMPTY 0x4 /* FIFO Empty */
-#define nFIFOEMPTY 0x0
-#define COMPLETE 0x8 /* DMA Complete */
-#define nCOMPLETE 0x0
-#define HSHK 0x10 /* Host Handshake */
-#define nHSHK 0x0
-#define TIMEOUT 0x20 /* Host Timeout */
-#define nTIMEOUT 0x0
-#define HIRQ 0x40 /* Host Interrupt Request */
-#define nHIRQ 0x0
-#define ALLOW_CNFG 0x80 /* Allow New Configuration */
-#define nALLOW_CNFG 0x0
-#define DMA_DIR 0x100 /* DMA Direction */
-#define nDMA_DIR 0x0
-#define BTE 0x200 /* Bus Timeout Enabled */
-#define nBTE 0x0
-#define HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
-#define nHOSTRD_DONE 0x0
+#define HOST_STAT_READY 0x1 /* DMA Ready */
+#define HOST_STAT_nREADY 0x0
+#define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */
+#define HOST_STAT_nFIFOFULL 0x0
+#define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */
+#define HOST_STAT_nFIFOEMPTY 0x0
+#define HOST_STAT_COMPLETE 0x8 /* DMA Complete */
+#define HOST_STAT_nCOMPLETE 0x0
+#define HOST_STAT_HSHK 0x10 /* Host Handshake */
+#define HOST_STAT_nHSHK 0x0
+#define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */
+#define HOST_STAT_nTIMEOUT 0x0
+#define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */
+#define HOST_STAT_nHIRQ 0x0
+#define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */
+#define HOST_STAT_nALLOW_CNFG 0x0
+#define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */
+#define HOST_STAT_nDMA_DIR 0x0
+#define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */
+#define HOST_STAT_nBTE 0x0
+#define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
+#define HOST_STAT_nHOSTRD_DONE 0x0
/* Bit masks for HOST_TIMEOUT */
-#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
+#define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */
/* Bit masks for CNT_CONFIG */
diff --git a/include/asm-blackfin/mach-bf527/dma.h b/include/asm-blackfin/mach-bf527/dma.h
index a41627a..2dfee12 100644
--- a/include/asm-blackfin/mach-bf527/dma.h
+++ b/include/asm-blackfin/mach-bf527/dma.h
@@ -35,7 +35,6 @@
#define MAX_BLACKFIN_DMA_CHANNEL 16
#define CH_PPI 0 /* PPI receive/transmit or NFC */
-#define CH_NFC 0 /* PPI receive/transmit or NFC */
#define CH_EMAC_RX 1 /* Ethernet MAC receive or HOSTDP */
#define CH_EMAC_HOSTDP 1 /* Ethernet MAC receive or HOSTDP */
#define CH_EMAC_TX 2 /* Ethernet MAC transmit or NFC */
@@ -54,6 +53,12 @@
#define CH_MEM_STREAM1_DEST 14 /* TX */
#define CH_MEM_STREAM1_SRC 15 /* RX */
+#if defined(CONFIG_BF527_NAND_D_PORTF)
+#define CH_NFC CH_PPI /* PPI receive/transmit or NFC */
+#elif defined(CONFIG_BF527_NAND_D_PORTH)
+#define CH_NFC CH_EMAC_TX /* PPI receive/transmit or NFC */
+#endif
+
extern int channel2irq(unsigned int channel);
extern struct dma_register *base_addr[];
diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/include/asm-blackfin/mach-bf548/defBF549.h
index 4e46d65..fcb72b4 100644
--- a/include/asm-blackfin/mach-bf548/defBF549.h
+++ b/include/asm-blackfin/mach-bf548/defBF549.h
@@ -1671,7 +1671,7 @@
/* Bit masks for MXVR_DMAx_CONFIG */
#define MDMAEN 0x1 /* DMA Channel Enable */
-#define DD 0x2 /* DMA Channel Direction */
+#define DMADD 0x2 /* DMA Channel Direction */
#define BY4SWAPEN 0x20 /* DMA Channel Four Byte Swap Enable */
#define LCHAN 0x3c0 /* DMA Channel Logical Channel */
#define BITSWAPEN 0x400 /* DMA Channel Bit Swap Enable */
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h
index 1d365c8..da979cb 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h
@@ -2252,6 +2252,13 @@
#define PLL_OFF 0x2 /* Disable PLL */
#define DF 0x1 /* Divide Frequency */
+/* SWRST Masks */
+#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
+#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
+#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
+#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
+#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
+
/* Bit masks for PLL_STAT */
#define PLL_LOCKED 0x20 /* PLL Locked Status */
diff --git a/include/asm-blackfin/mach-bf548/portmux.h b/include/asm-blackfin/mach-bf548/portmux.h
index b382deb..6b48512 100644
--- a/include/asm-blackfin/mach-bf548/portmux.h
+++ b/include/asm-blackfin/mach-bf548/portmux.h
@@ -267,4 +267,18 @@
#define P_AMC_BG (P_DEFINED | P_IDENT(GPIO_PJ12) | P_FUNCT(0))
#define P_AMC_BGH (P_DEFINED | P_IDENT(GPIO_PJ13) | P_FUNCT(0))
+
+#define P_NAND_D0 (P_DONTCARE)
+#define P_NAND_D1 (P_DONTCARE)
+#define P_NAND_D2 (P_DONTCARE)
+#define P_NAND_D3 (P_DONTCARE)
+#define P_NAND_D4 (P_DONTCARE)
+#define P_NAND_D5 (P_DONTCARE)
+#define P_NAND_D6 (P_DONTCARE)
+#define P_NAND_D7 (P_DONTCARE)
+#define P_NAND_WE (P_DONTCARE)
+#define P_NAND_RE (P_DONTCARE)
+#define P_NAND_CLE (P_DONTCARE)
+#define P_NAND_ALE (P_DONTCARE)
+
#endif /* _MACH_PORTMUX_H_ */
diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h
index bf7dc4e..7945e8a 100644
--- a/include/asm-blackfin/mach-bf561/defBF561.h
+++ b/include/asm-blackfin/mach-bf561/defBF561.h
@@ -55,6 +55,9 @@
/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
#define SWRST SICA_SWRST
#define SYSCR SICA_SYSCR
+#define RESET_DOUBLE (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A)
+#define RESET_WDOG (SWRST_WDT_B|SWRST_WDT_A)
+#define RESET_SOFTWARE (SWRST_OCCURRED)
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
#define SICA_SWRST 0xFFC00100 /* Software Reset register */
diff --git a/include/asm-frv/scatterlist.h b/include/asm-frv/scatterlist.h
index 99ba76e..2e7143b 100644
--- a/include/asm-frv/scatterlist.h
+++ b/include/asm-frv/scatterlist.h
@@ -16,8 +16,7 @@
*
* can be rewritten as
*
- * sg_set_page(virt_to_page(some_ptr));
- * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
+ * sg_set_buf(sg, some_ptr, length);
*
* and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
*/
diff --git a/include/asm-ia64/percpu.h b/include/asm-ia64/percpu.h
index 43a7aac..c4f1e32 100644
--- a/include/asm-ia64/percpu.h
+++ b/include/asm-ia64/percpu.h
@@ -46,7 +46,7 @@
#ifdef CONFIG_SMP
extern unsigned long __per_cpu_offset[NR_CPUS];
-#define per_cpu_offset(x) (__per_cpu_offset(x))
+#define per_cpu_offset(x) (__per_cpu_offset[x])
/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
diff --git a/include/asm-ia64/smp.h b/include/asm-ia64/smp.h
index 471cc2e..4fa733d 100644
--- a/include/asm-ia64/smp.h
+++ b/include/asm-ia64/smp.h
@@ -60,7 +60,6 @@
extern cpumask_t cpu_core_map[NR_CPUS];
DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
extern int smp_num_siblings;
-extern int smp_num_cpucores;
extern void __iomem *ipi_base_addr;
extern unsigned char smp_int_redirect;
diff --git a/include/asm-mips/i8253.h b/include/asm-mips/i8253.h
index affb32c..032ca73 100644
--- a/include/asm-mips/i8253.h
+++ b/include/asm-mips/i8253.h
@@ -5,25 +5,14 @@
#ifndef __ASM_I8253_H
#define __ASM_I8253_H
+#include <linux/spinlock.h>
+
/* i8253A PIT registers */
#define PIT_MODE 0x43
#define PIT_CH0 0x40
#define PIT_CH2 0x42
-/* i8259A PIC registers */
-#define PIC_MASTER_CMD 0x20
-#define PIC_MASTER_IMR 0x21
-#define PIC_MASTER_ISR PIC_MASTER_CMD
-#define PIC_MASTER_POLL PIC_MASTER_ISR
-#define PIC_MASTER_OCW3 PIC_MASTER_ISR
-#define PIC_SLAVE_CMD 0xa0
-#define PIC_SLAVE_IMR 0xa1
-
-/* i8259A PIC related value */
-#define PIC_CASCADE_IR 2
-#define MASTER_ICW4_DEFAULT 0x01
-#define SLAVE_ICW4_DEFAULT 0x01
-#define PIC_ICW4_AEOI 2
+extern spinlock_t i8253_lock;
extern void setup_pit_timer(void);
diff --git a/include/asm-mips/ip32/ip32_ints.h b/include/asm-mips/ip32/ip32_ints.h
index 042f8218..ab5612f 100644
--- a/include/asm-mips/ip32/ip32_ints.h
+++ b/include/asm-mips/ip32/ip32_ints.h
@@ -22,10 +22,12 @@
* CPU interrupts are 0 ... 7
*/
+ CRIME_IRQ_BASE = MIPS_CPU_IRQ_BASE,
+
/*
* MACE
*/
- MACE_VID_IN1_IRQ = MIPS_CPU_IRQ_BASE + 8,
+ MACE_VID_IN1_IRQ = CRIME_IRQ_BASE,
MACE_VID_IN2_IRQ,
MACE_VID_OUT_IRQ,
MACE_ETHERNET_IRQ,
diff --git a/include/asm-mips/jmr3927/jmr3927.h b/include/asm-mips/jmr3927/jmr3927.h
index b2dc35f..81602c8 100644
--- a/include/asm-mips/jmr3927/jmr3927.h
+++ b/include/asm-mips/jmr3927/jmr3927.h
@@ -132,9 +132,7 @@
#define JMR3927_IRQ_IRC_DMA (JMR3927_IRQ_IRC + TX3927_IR_DMA)
#define JMR3927_IRQ_IRC_PIO (JMR3927_IRQ_IRC + TX3927_IR_PIO)
#define JMR3927_IRQ_IRC_PCI (JMR3927_IRQ_IRC + TX3927_IR_PCI)
-#define JMR3927_IRQ_IRC_TMR0 (JMR3927_IRQ_IRC + TX3927_IR_TMR0)
-#define JMR3927_IRQ_IRC_TMR1 (JMR3927_IRQ_IRC + TX3927_IR_TMR1)
-#define JMR3927_IRQ_IRC_TMR2 (JMR3927_IRQ_IRC + TX3927_IR_TMR2)
+#define JMR3927_IRQ_IRC_TMR(ch) (JMR3927_IRQ_IRC + TX3927_IR_TMR(ch))
#define JMR3927_IRQ_IOC_PCIA (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIA)
#define JMR3927_IRQ_IOC_PCIB (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIB)
#define JMR3927_IRQ_IOC_PCIC (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIC)
@@ -148,17 +146,12 @@
#define JMR3927_IRQ_IOCINT JMR3927_IRQ_IRC_INT1
/* TC35815 100M Ether (JMR-TX3912:JPW4:2-3 Short) */
#define JMR3927_IRQ_ETHER0 JMR3927_IRQ_IRC_INT3
-/* Clock Tick (10ms) */
-#define JMR3927_IRQ_TICK JMR3927_IRQ_IRC_TMR0
/* Clocks */
#define JMR3927_CORECLK 132710400 /* 132.7MHz */
#define JMR3927_GBUSCLK (JMR3927_CORECLK / 2) /* 66.35MHz */
#define JMR3927_IMCLK (JMR3927_CORECLK / 4) /* 33.17MHz */
-#define jmr3927_tmrptr tx3927_tmrptr(0) /* TMR0 */
-
-
/*
* TX3927 Pin Configuration:
*
diff --git a/include/asm-mips/jmr3927/tx3927.h b/include/asm-mips/jmr3927/tx3927.h
index 211bcf4..338f998 100644
--- a/include/asm-mips/jmr3927/tx3927.h
+++ b/include/asm-mips/jmr3927/tx3927.h
@@ -222,9 +222,7 @@
#define TX3927_IR_DMA 8
#define TX3927_IR_PIO 9
#define TX3927_IR_PCI 10
-#define TX3927_IR_TMR0 13
-#define TX3927_IR_TMR1 14
-#define TX3927_IR_TMR2 15
+#define TX3927_IR_TMR(ch) (13 + (ch))
#define TX3927_NUM_IR 16
/*
diff --git a/include/asm-mips/jmr3927/txx927.h b/include/asm-mips/jmr3927/txx927.h
index 58a8ff6..0474fe8 100644
--- a/include/asm-mips/jmr3927/txx927.h
+++ b/include/asm-mips/jmr3927/txx927.h
@@ -10,22 +10,6 @@
#ifndef __ASM_TXX927_H
#define __ASM_TXX927_H
-struct txx927_tmr_reg {
- volatile unsigned long tcr;
- volatile unsigned long tisr;
- volatile unsigned long cpra;
- volatile unsigned long cprb;
- volatile unsigned long itmr;
- volatile unsigned long unused0[3];
- volatile unsigned long ccdr;
- volatile unsigned long unused1[3];
- volatile unsigned long pgmr;
- volatile unsigned long unused2[3];
- volatile unsigned long wtmr;
- volatile unsigned long unused3[43];
- volatile unsigned long trr;
-};
-
struct txx927_sio_reg {
volatile unsigned long lcr;
volatile unsigned long dicr;
@@ -51,27 +35,6 @@
};
/*
- * TMR
- */
-/* TMTCR : Timer Control */
-#define TXx927_TMTCR_TCE 0x00000080
-#define TXx927_TMTCR_CCDE 0x00000040
-#define TXx927_TMTCR_CRE 0x00000020
-#define TXx927_TMTCR_ECES 0x00000008
-#define TXx927_TMTCR_CCS 0x00000004
-#define TXx927_TMTCR_TMODE_MASK 0x00000003
-#define TXx927_TMTCR_TMODE_ITVL 0x00000000
-
-/* TMTISR : Timer Int. Status */
-#define TXx927_TMTISR_TPIBS 0x00000004
-#define TXx927_TMTISR_TPIAS 0x00000002
-#define TXx927_TMTISR_TIIS 0x00000001
-
-/* TMTITMR : Interval Timer Mode */
-#define TXx927_TMTITMR_TIIE 0x00008000
-#define TXx927_TMTITMR_TZCE 0x00000001
-
-/*
* SIO
*/
/* SILCR : Line Control */
diff --git a/include/asm-mips/mach-au1x00/timex.h b/include/asm-mips/mach-au1x00/timex.h
deleted file mode 100644
index e3ada66..0000000
--- a/include/asm-mips/mach-au1x00/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 by Ralf Baechle
- */
-#ifndef __ASM_MACH_AU1X00_TIMEX_H
-#define __ASM_MACH_AU1X00_TIMEX_H
-
-#define CLOCK_TICK_RATE ((HZ * 100000UL) / 2)
-
-#endif /* __ASM_MACH_AU1X00_TIMEX_H */
diff --git a/include/asm-mips/mach-cobalt/irq.h b/include/asm-mips/mach-cobalt/irq.h
index 179d0e8..57c8c9a 100644
--- a/include/asm-mips/mach-cobalt/irq.h
+++ b/include/asm-mips/mach-cobalt/irq.h
@@ -35,7 +35,7 @@
* 4 - ethernet
* 5 - 16550 UART
* 6 - cascade i8259
- * 7 - CP0 counter (unused)
+ * 7 - CP0 counter
*/
#define MIPS_CPU_IRQ_BASE 16
@@ -48,7 +48,6 @@
#define SCSI_IRQ (MIPS_CPU_IRQ_BASE + 5)
#define I8259_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 6)
-
#define GT641XX_IRQ_BASE 24
#include <asm/irq_gt641xx.h>
diff --git a/include/asm-mips/mach-generic/timex.h b/include/asm-mips/mach-generic/timex.h
deleted file mode 100644
index 48b4cfa..0000000
--- a/include/asm-mips/mach-generic/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 2005 by Ralf Baechle
- */
-#ifndef __ASM_MACH_GENERIC_TIMEX_H
-#define __ASM_MACH_GENERIC_TIMEX_H
-
-#define CLOCK_TICK_RATE 500000
-
-#endif /* __ASM_MACH_GENERIC_TIMEX_H */
diff --git a/include/asm-mips/mach-jazz/timex.h b/include/asm-mips/mach-jazz/timex.h
deleted file mode 100644
index 93affa3..0000000
--- a/include/asm-mips/mach-jazz/timex.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 by Ralf Baechle
- */
-#ifndef __ASM_MACH_JAZZ_TIMEX_H
-#define __ASM_MACH_JAZZ_TIMEX_H
-
-/*
- * Jazz is still using the R4030 100Hz counter
- */
-#define CLOCK_TICK_RATE 100
-
-#endif /* __ASM_MACH_JAZZ_TIMEX_H */
diff --git a/include/asm-mips/mach-qemu/timex.h b/include/asm-mips/mach-qemu/timex.h
deleted file mode 100644
index cd54369..0000000
--- a/include/asm-mips/mach-qemu/timex.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 Daniel Jacobowitz
- */
-#ifndef __ASM_MACH_QEMU_TIMEX_H
-#define __ASM_MACH_QEMU_TIMEX_H
-
-/*
- * We use a simulated i8254 PIC...
- */
-#define CLOCK_TICK_RATE 1193182
-
-#endif /* __ASM_MACH_QEMU_TIMEX_H */
diff --git a/include/asm-mips/mach-rm/timex.h b/include/asm-mips/mach-rm/timex.h
deleted file mode 100644
index 11ff6cb..0000000
--- a/include/asm-mips/mach-rm/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 2005 by Ralf Baechle
- */
-#ifndef __ASM_MACH_RM200_TIMEX_H
-#define __ASM_MACH_RM200_TIMEX_H
-
-#define CLOCK_TICK_RATE 1193182
-
-#endif /* __ASM_MACH_RM200_TIMEX_H */
diff --git a/include/asm-mips/time.h b/include/asm-mips/time.h
index bc47af3..ee1663e 100644
--- a/include/asm-mips/time.h
+++ b/include/asm-mips/time.h
@@ -10,15 +10,10 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
- *
- * Please refer to Documentation/mips/time.README.
*/
#ifndef _ASM_TIME_H
#define _ASM_TIME_H
-#include <linux/interrupt.h>
-#include <linux/linkage.h>
-#include <linux/ptrace.h>
#include <linux/rtc.h>
#include <linux/spinlock.h>
#include <linux/clockchips.h>
@@ -38,27 +33,13 @@
/*
* Timer interrupt functions.
* mips_timer_state is needed for high precision timer calibration.
- * mips_timer_ack may be NULL if the interrupt is self-recoverable.
*/
extern int (*mips_timer_state)(void);
/*
- * High precision timer clocksource.
- * If .read is NULL, an R4k-compatible timer setup is attempted.
- */
-extern struct clocksource clocksource_mips;
-
-/*
- * profiling and process accouting is done separately in local_timer_interrupt
- */
-extern void local_timer_interrupt(int irq, void *dev_id);
-
-/*
* board specific routines required by time_init().
*/
-struct irqaction;
extern void plat_time_init(void);
-extern void plat_timer_setup(struct irqaction *irq);
/*
* mips_hpt_frequency - must be set if you intend to use an R4k-compatible
@@ -78,6 +59,7 @@
*/
#ifdef CONFIG_CEVT_R4K
extern void mips_clockevent_init(void);
+extern unsigned int __weak get_c0_compare_int(void);
#else
static inline void mips_clockevent_init(void)
{
diff --git a/include/asm-mips/timex.h b/include/asm-mips/timex.h
index 87c68ae..5816ad1 100644
--- a/include/asm-mips/timex.h
+++ b/include/asm-mips/timex.h
@@ -13,27 +13,12 @@
#include <asm/mipsregs.h>
/*
- * This is the frequency of the timer used for Linux's timer interrupt.
- * The value should be defined as accurate as possible or under certain
- * circumstances Linux timekeeping might become inaccurate or fail.
- *
- * For many system the exact clockrate of the timer isn't known but due to
- * the way this value is used we can get away with a wrong value as long
- * as this value is:
- *
- * - a multiple of HZ
- * - a divisor of the actual rate
- *
- * 500000 is a good such cheat value.
- *
- * The obscure number 1193182 is the same as used by the original i8254
- * time in legacy PC hardware; the chip unfortunately also found in a
- * bunch of MIPS systems. The last remaining user of the i8254 for the
- * timer interrupt is the RM200; it's a very standard system so there is
- * no reason to make this a separate architecture.
+ * This is the clock rate of the i8253 PIT. A MIPS system may not have
+ * a PIT by the symbol is used all over the kernel including some APIs.
+ * So keeping it defined to the number for the PIT is the only sane thing
+ * for now.
*/
-
-#include <timex.h>
+#define CLOCK_TICK_RATE 1193182
/*
* Standard way to access the cycle counter.
diff --git a/include/asm-mips/tx4927/tx4927_pci.h b/include/asm-mips/tx4927/tx4927_pci.h
index f98b2bb..3f1e470 100644
--- a/include/asm-mips/tx4927/tx4927_pci.h
+++ b/include/asm-mips/tx4927/tx4927_pci.h
@@ -9,6 +9,7 @@
#define __ASM_TX4927_TX4927_PCI_H
#define TX4927_CCFG_TOE 0x00004000
+#define TX4927_CCFG_TINTDIS 0x01000000
#define TX4927_PCIMEM 0x08000000
#define TX4927_PCIMEM_SIZE 0x08000000
@@ -20,6 +21,8 @@
#define TX4927_PCIC_REG 0xff1fd000
#define TX4927_CCFG_REG 0xff1fe000
#define TX4927_IRC_REG 0xff1ff600
+#define TX4927_NR_TMR 3
+#define TX4927_TMR_REG(ch) (0xff1ff000 + (ch) * 0x100)
#define TX4927_CE3 0x17f00000 /* 1M */
#define TX4927_PCIRESET_ADDR 0xbc00f006
#define TX4927_PCI_CLK_ADDR (KSEG1 + TX4927_CE3 + 0x00040020)
diff --git a/include/asm-mips/tx4938/tx4938.h b/include/asm-mips/tx4938/tx4938.h
index 650b010..f7c448b 100644
--- a/include/asm-mips/tx4938/tx4938.h
+++ b/include/asm-mips/tx4938/tx4938.h
@@ -641,7 +641,6 @@
#define tx4938_pcicptr ((struct tx4938_pcic_reg *)TX4938_PCIC_REG)
#define tx4938_pcic1ptr ((struct tx4938_pcic_reg *)TX4938_PCIC1_REG)
#define tx4938_ccfgptr ((struct tx4938_ccfg_reg *)TX4938_CCFG_REG)
-#define tx4938_tmrptr(ch) ((struct tx4938_tmr_reg *)TX4938_TMR_REG(ch))
#define tx4938_sioptr(ch) ((struct tx4938_sio_reg *)TX4938_SIO_REG(ch))
#define tx4938_pioptr ((struct tx4938_pio_reg *)TX4938_PIO_REG)
#define tx4938_aclcptr ((struct tx4938_aclc_reg *)TX4938_ACLC_REG)
diff --git a/include/asm-mips/txx9tmr.h b/include/asm-mips/txx9tmr.h
new file mode 100644
index 0000000..67f70a8
--- /dev/null
+++ b/include/asm-mips/txx9tmr.h
@@ -0,0 +1,67 @@
+/*
+ * include/asm-mips/txx9tmr.h
+ * TX39/TX49 timer controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9TMR_H
+#define __ASM_TXX9TMR_H
+
+#include <linux/types.h>
+
+struct txx9_tmr_reg {
+ u32 tcr;
+ u32 tisr;
+ u32 cpra;
+ u32 cprb;
+ u32 itmr;
+ u32 unused0[3];
+ u32 ccdr;
+ u32 unused1[3];
+ u32 pgmr;
+ u32 unused2[3];
+ u32 wtmr;
+ u32 unused3[43];
+ u32 trr;
+};
+
+/* TMTCR : Timer Control */
+#define TXx9_TMTCR_TCE 0x00000080
+#define TXx9_TMTCR_CCDE 0x00000040
+#define TXx9_TMTCR_CRE 0x00000020
+#define TXx9_TMTCR_ECES 0x00000008
+#define TXx9_TMTCR_CCS 0x00000004
+#define TXx9_TMTCR_TMODE_MASK 0x00000003
+#define TXx9_TMTCR_TMODE_ITVL 0x00000000
+#define TXx9_TMTCR_TMODE_PGEN 0x00000001
+#define TXx9_TMTCR_TMODE_WDOG 0x00000002
+
+/* TMTISR : Timer Int. Status */
+#define TXx9_TMTISR_TPIBS 0x00000004
+#define TXx9_TMTISR_TPIAS 0x00000002
+#define TXx9_TMTISR_TIIS 0x00000001
+
+/* TMITMR : Interval Timer Mode */
+#define TXx9_TMITMR_TIIE 0x00008000
+#define TXx9_TMITMR_TZCE 0x00000001
+
+/* TMWTMR : Watchdog Timer Mode */
+#define TXx9_TMWTMR_TWIE 0x00008000
+#define TXx9_TMWTMR_WDIS 0x00000080
+#define TXx9_TMWTMR_TWC 0x00000001
+
+void txx9_clocksource_init(unsigned long baseaddr,
+ unsigned int imbusclk);
+void txx9_clockevent_init(unsigned long baseaddr, int irq,
+ unsigned int imbusclk);
+void txx9_tmr_init(unsigned long baseaddr);
+
+#ifdef CONFIG_CPU_TX39XX
+#define TXX9_TIMER_BITS 24
+#else
+#define TXX9_TIMER_BITS 32
+#endif
+
+#endif /* __ASM_TXX9TMR_H */
diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h
index 7a18649..01e5cf5 100644
--- a/include/asm-sh/cache.h
+++ b/include/asm-sh/cache.h
@@ -18,9 +18,8 @@
#define SH_CACHE_ASSOC 8
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
#ifndef __ASSEMBLY__
struct cache_info {
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index c61d902..11850f6 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -41,7 +41,7 @@
#define irq_canonicalize(irq) (irq)
#define irq_demux(irq) sh_mv.mv_irq_demux(irq)
-#ifdef CONFIG_4KSTACKS
+#ifdef CONFIG_IRQSTACKS
extern void irq_ctx_init(int cpu);
extern void irq_ctx_exit(int cpu);
# define __ARCH_HAS_DO_SOFTIRQ
diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h
index cb3d46c..3aa8b07 100644
--- a/include/asm-sh/page.h
+++ b/include/asm-sh/page.h
@@ -128,7 +128,6 @@
#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
-#define phys_to_page(phys) (pfn_to_page(phys >> PAGE_SHIFT))
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
/* PFN start number, because of __MEMORY_START */
diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h
index cf0dd2b..0b1d7c6 100644
--- a/include/asm-sh/pgtable.h
+++ b/include/asm-sh/pgtable.h
@@ -399,7 +399,7 @@
#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK)
#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-#define pte_page(x) phys_to_page(pte_val(x)&PTE_PHYS_MASK)
+#define pte_page(x) pfn_to_page(pte_pfn(x))
/*
* The following only work if pte_present() is true.
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index 4f2922a..ab0028d 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -71,7 +71,7 @@
struct cache_info scache; /* Secondary cache */
unsigned long flags;
-} __attribute__ ((aligned(SMP_CACHE_BYTES)));
+} __attribute__ ((aligned(L1_CACHE_BYTES)));
extern struct sh_cpuinfo cpu_data[];
#define boot_cpu_data cpu_data[0]
diff --git a/include/asm-sh/setup.h b/include/asm-sh/setup.h
index 586a971..55a2bd3 100644
--- a/include/asm-sh/setup.h
+++ b/include/asm-sh/setup.h
@@ -5,6 +5,20 @@
#ifdef __KERNEL__
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+#define PARAM ((unsigned char *)empty_zero_page)
+
+#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
+#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
+#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
+#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
+#define INITRD_START (*(unsigned long *) (PARAM+0x010))
+#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
+/* ... */
+#define COMMAND_LINE ((char *) (PARAM+0x100))
+
int setup_early_printk(char *);
void sh_mv_setup(void);
diff --git a/include/asm-sh64/dma-mapping.h b/include/asm-sh64/dma-mapping.h
index 1438b76..18f8dd6 100644
--- a/include/asm-sh64/dma-mapping.h
+++ b/include/asm-sh64/dma-mapping.h
@@ -42,8 +42,9 @@
static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction dir)
{
- unsigned long s = (unsigned long) vaddr & L1_CACHE_ALIGN_MASK;
- unsigned long e = (vaddr + size) & L1_CACHE_ALIGN_MASK;
+ unsigned long start = (unsigned long) vaddr;
+ unsigned long s = start & L1_CACHE_ALIGN_MASK;
+ unsigned long e = (start + size) & L1_CACHE_ALIGN_MASK;
for (; s <= e; s += L1_CACHE_BYTES)
asm volatile ("ocbp %0, 0" : : "r" (s));
diff --git a/include/asm-sh64/pci.h b/include/asm-sh64/pci.h
index 57a67cf..18055db 100644
--- a/include/asm-sh64/pci.h
+++ b/include/asm-sh64/pci.h
@@ -72,15 +72,6 @@
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#endif
-/* These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
diff --git a/include/asm-sh64/scatterlist.h b/include/asm-sh64/scatterlist.h
index 5109251..7f729bb 100644
--- a/include/asm-sh64/scatterlist.h
+++ b/include/asm-sh64/scatterlist.h
@@ -23,6 +23,15 @@
unsigned int length;
};
+/* These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
#define ISA_DMA_THRESHOLD (0xffffffff)
#endif /* !__ASM_SH64_SCATTERLIST_H */
diff --git a/include/asm-sparc/atomic.h b/include/asm-sparc/atomic.h
index bdca541..3328950 100644
--- a/include/asm-sparc/atomic.h
+++ b/include/asm-sparc/atomic.h
@@ -1,6 +1,6 @@
/* atomic.h: These still suck, but the I-cache hit rate is higher.
*
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
* Copyright (C) 2000 Anton Blanchard (anton@linuxcare.com.au)
* Copyright (C) 2007 Kyle McMartin (kyle@parisc-linux.org)
*
@@ -33,7 +33,7 @@
extern unsigned long __cmpxchg_u32(volatile u32 *m, u32 old, u32 new_);
/* don't worry...optimizer will get rid of most of this */
-static __inline__ unsigned long
+static inline unsigned long
__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size)
{
switch(size) {
diff --git a/include/asm-sparc/dma.h b/include/asm-sparc/dma.h
index 407b361..959d6c8 100644
--- a/include/asm-sparc/dma.h
+++ b/include/asm-sparc/dma.h
@@ -1,7 +1,6 @@
-/* $Id: dma.h,v 1.35 1999/12/27 06:37:09 anton Exp $
- * include/asm-sparc/dma.h
+/* include/asm-sparc/dma.h
*
- * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1995 (C) David S. Miller (davem@davemloft.net)
*/
#ifndef _ASM_SPARC_DMA_H
@@ -21,14 +20,14 @@
struct page;
extern spinlock_t dma_spin_lock;
-static __inline__ unsigned long claim_dma_lock(void)
+static inline unsigned long claim_dma_lock(void)
{
unsigned long flags;
spin_lock_irqsave(&dma_spin_lock, flags);
return flags;
}
-static __inline__ void release_dma_lock(unsigned long flags)
+static inline void release_dma_lock(unsigned long flags)
{
spin_unlock_irqrestore(&dma_spin_lock, flags);
}
diff --git a/include/asm-sparc/floppy.h b/include/asm-sparc/floppy.h
index 5da1eef..dbe7a58 100644
--- a/include/asm-sparc/floppy.h
+++ b/include/asm-sparc/floppy.h
@@ -1,6 +1,6 @@
/* asm-sparc/floppy.h: Sparc specific parts of the Floppy driver.
*
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
*/
#ifndef __ASM_SPARC_FLOPPY_H
@@ -232,12 +232,12 @@
extern unsigned long pdma_areasize;
/* Common routines to all controller types on the Sparc. */
-static __inline__ void virtual_dma_init(void)
+static inline void virtual_dma_init(void)
{
/* nothing... */
}
-static __inline__ void sun_fd_disable_dma(void)
+static inline void sun_fd_disable_dma(void)
{
doing_pdma = 0;
if (pdma_base) {
@@ -246,7 +246,7 @@
}
}
-static __inline__ void sun_fd_set_dma_mode(int mode)
+static inline void sun_fd_set_dma_mode(int mode)
{
switch(mode) {
case DMA_MODE_READ:
@@ -261,17 +261,17 @@
}
}
-static __inline__ void sun_fd_set_dma_addr(char *buffer)
+static inline void sun_fd_set_dma_addr(char *buffer)
{
pdma_vaddr = buffer;
}
-static __inline__ void sun_fd_set_dma_count(int length)
+static inline void sun_fd_set_dma_count(int length)
{
pdma_size = length;
}
-static __inline__ void sun_fd_enable_dma(void)
+static inline void sun_fd_enable_dma(void)
{
pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
pdma_base = pdma_vaddr;
diff --git a/include/asm-sparc/ide.h b/include/asm-sparc/ide.h
index 4040227..4076cb5 100644
--- a/include/asm-sparc/ide.h
+++ b/include/asm-sparc/ide.h
@@ -1,7 +1,6 @@
-/* $Id: ide.h,v 1.7 2002/01/16 20:58:40 davem Exp $
- * ide.h: SPARC PCI specific IDE glue.
+/* ide.h: SPARC PCI specific IDE glue.
*
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1997 David S. Miller (davem@davemloft.net)
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
* Adaptation from sparc64 version to sparc by Pete Zaitcev.
*/
@@ -31,7 +30,7 @@
#define __ide_mm_outsw __ide_outsw
#define __ide_mm_outsl __ide_outsl
-static __inline__ void __ide_insw(unsigned long port,
+static inline void __ide_insw(unsigned long port,
void *dst,
unsigned long count)
{
@@ -62,7 +61,7 @@
/* __flush_dcache_range((unsigned long)dst, end); */ /* P3 see hme */
}
-static __inline__ void __ide_outsw(unsigned long port,
+static inline void __ide_outsw(unsigned long port,
const void *src,
unsigned long count)
{
diff --git a/include/asm-sparc/posix_types.h b/include/asm-sparc/posix_types.h
index 9ef1b3d..62c8fa7 100644
--- a/include/asm-sparc/posix_types.h
+++ b/include/asm-sparc/posix_types.h
@@ -49,7 +49,7 @@
#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
#undef __FD_SET
-static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
{
unsigned long _tmp = fd / __NFDBITS;
unsigned long _rem = fd % __NFDBITS;
@@ -57,7 +57,7 @@
}
#undef __FD_CLR
-static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
{
unsigned long _tmp = fd / __NFDBITS;
unsigned long _rem = fd % __NFDBITS;
@@ -65,7 +65,7 @@
}
#undef __FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
{
unsigned long _tmp = fd / __NFDBITS;
unsigned long _rem = fd % __NFDBITS;
@@ -77,7 +77,7 @@
* for 256 and 1024-bit fd_sets respectively)
*/
#undef __FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+static inline void __FD_ZERO(__kernel_fd_set *p)
{
unsigned long *tmp = p->fds_bits;
int i;
diff --git a/include/asm-sparc/system.h b/include/asm-sparc/system.h
index 8c259de..2655d14 100644
--- a/include/asm-sparc/system.h
+++ b/include/asm-sparc/system.h
@@ -1,5 +1,3 @@
-/* $Id: system.h,v 1.86 2001/10/30 04:57:10 davem Exp $ */
-
#ifndef __SPARC_SYSTEM_H
#define __SPARC_SYSTEM_H
@@ -56,7 +54,7 @@
extern int serial_console;
extern int stop_a_enabled;
-static __inline__ int con_is_present(void)
+static inline int con_is_present(void)
{
return serial_console ? 0 : 1;
}
@@ -217,7 +215,7 @@
extern void __xchg_called_with_bad_pointer(void);
-static __inline__ unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
+static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
{
switch (size) {
case 4:
diff --git a/include/asm-sparc64/atomic.h b/include/asm-sparc64/atomic.h
index 3fb4e1f..2c71ec4a 100644
--- a/include/asm-sparc64/atomic.h
+++ b/include/asm-sparc64/atomic.h
@@ -1,5 +1,4 @@
-/* $Id: atomic.h,v 1.22 2001/07/11 23:56:07 davem Exp $
- * atomic.h: Thankfully the V9 is at least reasonable for this
+/* atomic.h: Thankfully the V9 is at least reasonable for this
* stuff.
*
* Copyright (C) 1996, 1997, 2000 David S. Miller (davem@redhat.com)
@@ -74,7 +73,7 @@
#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
{
int c, old;
c = atomic_read(v);
@@ -95,7 +94,7 @@
((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
{
long c, old;
c = atomic64_read(v);
diff --git a/include/asm-sparc64/backoff.h b/include/asm-sparc64/backoff.h
index 0e32f8b..dadd6c3 100644
--- a/include/asm-sparc64/backoff.h
+++ b/include/asm-sparc64/backoff.h
@@ -21,7 +21,9 @@
#else
#define BACKOFF_SETUP(reg)
-#define BACKOFF_SPIN(reg, tmp, label)
+#define BACKOFF_SPIN(reg, tmp, label) \
+ ba,pt %xcc, label; \
+ nop;
#endif
diff --git a/include/asm-sparc64/byteorder.h b/include/asm-sparc64/byteorder.h
index c69b08a..3943022 100644
--- a/include/asm-sparc64/byteorder.h
+++ b/include/asm-sparc64/byteorder.h
@@ -1,4 +1,3 @@
-/* $Id: byteorder.h,v 1.8 1997/12/18 02:44:14 ecd Exp $ */
#ifndef _SPARC64_BYTEORDER_H
#define _SPARC64_BYTEORDER_H
@@ -7,7 +6,7 @@
#ifdef __GNUC__
-static __inline__ __u16 ___arch__swab16p(const __u16 *addr)
+static inline __u16 ___arch__swab16p(const __u16 *addr)
{
__u16 ret;
@@ -17,7 +16,7 @@
return ret;
}
-static __inline__ __u32 ___arch__swab32p(const __u32 *addr)
+static inline __u32 ___arch__swab32p(const __u32 *addr)
{
__u32 ret;
@@ -27,7 +26,7 @@
return ret;
}
-static __inline__ __u64 ___arch__swab64p(const __u64 *addr)
+static inline __u64 ___arch__swab64p(const __u64 *addr)
{
__u64 ret;
diff --git a/include/asm-sparc64/fpumacro.h b/include/asm-sparc64/fpumacro.h
index d583e5e..cc463fe 100644
--- a/include/asm-sparc64/fpumacro.h
+++ b/include/asm-sparc64/fpumacro.h
@@ -16,7 +16,7 @@
#define FPUSTATE (struct fpustate *)(current_thread_info()->fpregs)
-static __inline__ unsigned long fprs_read(void)
+static inline unsigned long fprs_read(void)
{
unsigned long retval;
@@ -25,7 +25,7 @@
return retval;
}
-static __inline__ void fprs_write(unsigned long val)
+static inline void fprs_write(unsigned long val)
{
__asm__ __volatile__("wr %0, 0x0, %%fprs" : : "r" (val));
}
diff --git a/include/asm-sparc64/futex.h b/include/asm-sparc64/futex.h
index 876312f..df1097d 100644
--- a/include/asm-sparc64/futex.h
+++ b/include/asm-sparc64/futex.h
@@ -17,7 +17,8 @@
"3:\n" \
" .section .fixup,#alloc,#execinstr\n" \
" .align 4\n" \
- "4: ba 3b\n" \
+ "4: sethi %%hi(3b), %0\n" \
+ " jmpl %0 + %%lo(3b), %%g0\n" \
" mov %5, %0\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
@@ -91,7 +92,8 @@
"2:\n"
" .section .fixup,#alloc,#execinstr\n"
" .align 4\n"
- "3: ba 2b\n"
+ "3: sethi %%hi(2b), %0\n"
+ " jmpl %0 + %%lo(2b), %%g0\n"
" mov %4, %0\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
diff --git a/include/asm-sparc64/io.h b/include/asm-sparc64/io.h
index cd7ef30..c299b85 100644
--- a/include/asm-sparc64/io.h
+++ b/include/asm-sparc64/io.h
@@ -1,4 +1,3 @@
-/* $Id: io.h,v 1.47 2001/12/13 10:36:02 davem Exp $ */
#ifndef __SPARC64_IO_H
#define __SPARC64_IO_H
@@ -19,7 +18,7 @@
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
#define BIO_VMERGE_BOUNDARY 8192
-static __inline__ u8 _inb(unsigned long addr)
+static inline u8 _inb(unsigned long addr)
{
u8 ret;
@@ -30,7 +29,7 @@
return ret;
}
-static __inline__ u16 _inw(unsigned long addr)
+static inline u16 _inw(unsigned long addr)
{
u16 ret;
@@ -41,7 +40,7 @@
return ret;
}
-static __inline__ u32 _inl(unsigned long addr)
+static inline u32 _inl(unsigned long addr)
{
u32 ret;
@@ -52,21 +51,21 @@
return ret;
}
-static __inline__ void _outb(u8 b, unsigned long addr)
+static inline void _outb(u8 b, unsigned long addr)
{
__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */"
: /* no outputs */
: "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
}
-static __inline__ void _outw(u16 w, unsigned long addr)
+static inline void _outw(u16 w, unsigned long addr)
{
__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */"
: /* no outputs */
: "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
}
-static __inline__ void _outl(u32 l, unsigned long addr)
+static inline void _outl(u32 l, unsigned long addr)
{
__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */"
: /* no outputs */
@@ -205,7 +204,7 @@
#define writeq(__q, __addr) _writeq(__q, __addr)
/* Now versions without byte-swapping. */
-static __inline__ u8 _raw_readb(unsigned long addr)
+static inline u8 _raw_readb(unsigned long addr)
{
u8 ret;
@@ -216,7 +215,7 @@
return ret;
}
-static __inline__ u16 _raw_readw(unsigned long addr)
+static inline u16 _raw_readw(unsigned long addr)
{
u16 ret;
@@ -227,7 +226,7 @@
return ret;
}
-static __inline__ u32 _raw_readl(unsigned long addr)
+static inline u32 _raw_readl(unsigned long addr)
{
u32 ret;
@@ -238,7 +237,7 @@
return ret;
}
-static __inline__ u64 _raw_readq(unsigned long addr)
+static inline u64 _raw_readq(unsigned long addr)
{
u64 ret;
@@ -249,28 +248,28 @@
return ret;
}
-static __inline__ void _raw_writeb(u8 b, unsigned long addr)
+static inline void _raw_writeb(u8 b, unsigned long addr)
{
__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_raw_writeb */"
: /* no outputs */
: "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
}
-static __inline__ void _raw_writew(u16 w, unsigned long addr)
+static inline void _raw_writew(u16 w, unsigned long addr)
{
__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_raw_writew */"
: /* no outputs */
: "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
}
-static __inline__ void _raw_writel(u32 l, unsigned long addr)
+static inline void _raw_writel(u32 l, unsigned long addr)
{
__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_raw_writel */"
: /* no outputs */
: "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
}
-static __inline__ void _raw_writeq(u64 q, unsigned long addr)
+static inline void _raw_writeq(u64 q, unsigned long addr)
{
__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_raw_writeq */"
: /* no outputs */
diff --git a/include/asm-sparc64/irq.h b/include/asm-sparc64/irq.h
index 182dba0..30cb76b 100644
--- a/include/asm-sparc64/irq.h
+++ b/include/asm-sparc64/irq.h
@@ -1,7 +1,6 @@
-/* $Id: irq.h,v 1.21 2002/01/23 11:27:36 davem Exp $
- * irq.h: IRQ registers on the 64-bit Sparc.
+/* irq.h: IRQ registers on the 64-bit Sparc.
*
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
* Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
*/
@@ -67,21 +66,21 @@
extern void fixup_irqs(void);
-static __inline__ void set_softint(unsigned long bits)
+static inline void set_softint(unsigned long bits)
{
__asm__ __volatile__("wr %0, 0x0, %%set_softint"
: /* No outputs */
: "r" (bits));
}
-static __inline__ void clear_softint(unsigned long bits)
+static inline void clear_softint(unsigned long bits)
{
__asm__ __volatile__("wr %0, 0x0, %%clear_softint"
: /* No outputs */
: "r" (bits));
}
-static __inline__ unsigned long get_softint(void)
+static inline unsigned long get_softint(void)
{
unsigned long retval;
diff --git a/include/asm-sparc64/mostek.h b/include/asm-sparc64/mostek.h
index d14dd89..c5652de 100644
--- a/include/asm-sparc64/mostek.h
+++ b/include/asm-sparc64/mostek.h
@@ -1,7 +1,6 @@
-/* $Id: mostek.h,v 1.4 2001/01/11 15:07:09 davem Exp $
- * mostek.h: Describes the various Mostek time of day clock registers.
+/* mostek.h: Describes the various Mostek time of day clock registers.
*
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
* Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
*/
@@ -38,7 +37,7 @@
*
* We now deal with physical addresses for I/O to the chip. -DaveM
*/
-static __inline__ u8 mostek_read(void __iomem *addr)
+static inline u8 mostek_read(void __iomem *addr)
{
u8 ret;
@@ -48,7 +47,7 @@
return ret;
}
-static __inline__ void mostek_write(void __iomem *addr, u8 val)
+static inline void mostek_write(void __iomem *addr, u8 val)
{
__asm__ __volatile__("stba %0, [%1] %2"
: /* no outputs */
diff --git a/include/asm-sparc64/ns87303.h b/include/asm-sparc64/ns87303.h
index 6d58fdf..686defe 100644
--- a/include/asm-sparc64/ns87303.h
+++ b/include/asm-sparc64/ns87303.h
@@ -1,5 +1,4 @@
-/* $Id: ns87303.h,v 1.3 2000/01/09 15:16:34 ecd Exp $
- * ns87303.h: Configuration Register Description for the
+/* ns87303.h: Configuration Register Description for the
* National Semiconductor PC87303 (SuperIO).
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
@@ -85,7 +84,7 @@
extern spinlock_t ns87303_lock;
-static __inline__ int ns87303_modify(unsigned long port, unsigned int index,
+static inline int ns87303_modify(unsigned long port, unsigned int index,
unsigned char clr, unsigned char set)
{
static unsigned char reserved[] = {
diff --git a/include/asm-sparc64/parport.h b/include/asm-sparc64/parport.h
index 8116e8f..e9555b2 100644
--- a/include/asm-sparc64/parport.h
+++ b/include/asm-sparc64/parport.h
@@ -1,5 +1,4 @@
-/* $Id: parport.h,v 1.11 2001/05/11 07:54:24 davem Exp $
- * parport.h: sparc64 specific parport initialization and dma.
+/* parport.h: sparc64 specific parport initialization and dma.
*
* Copyright (C) 1999 Eddie C. Dost (ecd@skynet.be)
*/
@@ -42,7 +41,7 @@
static DECLARE_BITMAP(dma_slot_map, PARPORT_PC_MAX_PORTS);
-static __inline__ int request_dma(unsigned int dmanr, const char *device_id)
+static inline int request_dma(unsigned int dmanr, const char *device_id)
{
if (dmanr >= PARPORT_PC_MAX_PORTS)
return -EINVAL;
@@ -51,7 +50,7 @@
return 0;
}
-static __inline__ void free_dma(unsigned int dmanr)
+static inline void free_dma(unsigned int dmanr)
{
if (dmanr >= PARPORT_PC_MAX_PORTS) {
printk(KERN_WARNING "Trying to free DMA%d\n", dmanr);
@@ -63,7 +62,7 @@
}
}
-static __inline__ void enable_dma(unsigned int dmanr)
+static inline void enable_dma(unsigned int dmanr)
{
ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 1);
@@ -73,32 +72,32 @@
BUG();
}
-static __inline__ void disable_dma(unsigned int dmanr)
+static inline void disable_dma(unsigned int dmanr)
{
ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 0);
}
-static __inline__ void clear_dma_ff(unsigned int dmanr)
+static inline void clear_dma_ff(unsigned int dmanr)
{
/* nothing */
}
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+static inline void set_dma_mode(unsigned int dmanr, char mode)
{
ebus_dma_prepare(&sparc_ebus_dmas[dmanr].info, (mode != DMA_MODE_WRITE));
}
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int addr)
+static inline void set_dma_addr(unsigned int dmanr, unsigned int addr)
{
sparc_ebus_dmas[dmanr].addr = addr;
}
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
{
sparc_ebus_dmas[dmanr].count = count;
}
-static __inline__ unsigned int get_dma_residue(unsigned int dmanr)
+static inline unsigned int get_dma_residue(unsigned int dmanr)
{
return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info);
}
diff --git a/include/asm-sparc64/posix_types.h b/include/asm-sparc64/posix_types.h
index c86b945..3426a65 100644
--- a/include/asm-sparc64/posix_types.h
+++ b/include/asm-sparc64/posix_types.h
@@ -53,7 +53,7 @@
#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
#undef __FD_SET
-static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
{
unsigned long _tmp = fd / __NFDBITS;
unsigned long _rem = fd % __NFDBITS;
@@ -61,7 +61,7 @@
}
#undef __FD_CLR
-static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
{
unsigned long _tmp = fd / __NFDBITS;
unsigned long _rem = fd % __NFDBITS;
@@ -69,7 +69,7 @@
}
#undef __FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
{
unsigned long _tmp = fd / __NFDBITS;
unsigned long _rem = fd % __NFDBITS;
@@ -81,7 +81,7 @@
* for 256 and 1024-bit fd_sets respectively)
*/
#undef __FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+static inline void __FD_ZERO(__kernel_fd_set *p)
{
unsigned long *tmp = p->fds_bits;
int i;
diff --git a/include/asm-sparc64/sbus.h b/include/asm-sparc64/sbus.h
index 0151cad..24a04a5 100644
--- a/include/asm-sparc64/sbus.h
+++ b/include/asm-sparc64/sbus.h
@@ -29,12 +29,12 @@
* numbers + offsets, and vice versa.
*/
-static __inline__ unsigned long sbus_devaddr(int slotnum, unsigned long offset)
+static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
{
return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<28)+(offset));
}
-static __inline__ int sbus_dev_slot(unsigned long dev_addr)
+static inline int sbus_dev_slot(unsigned long dev_addr)
{
return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>28);
}
diff --git a/include/asm-sparc64/spitfire.h b/include/asm-sparc64/spitfire.h
index cf78078..63b7040 100644
--- a/include/asm-sparc64/spitfire.h
+++ b/include/asm-sparc64/spitfire.h
@@ -1,7 +1,6 @@
-/* $Id: spitfire.h,v 1.18 2001/11/29 16:42:10 kanoj Exp $
- * spitfire.h: SpitFire/BlackBird/Cheetah inline MMU operations.
+/* spitfire.h: SpitFire/BlackBird/Cheetah inline MMU operations.
*
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
*/
#ifndef _SPARC64_SPITFIRE_H
@@ -67,7 +66,7 @@
/* The data cache is write through, so this just invalidates the
* specified line.
*/
-static __inline__ void spitfire_put_dcache_tag(unsigned long addr, unsigned long tag)
+static inline void spitfire_put_dcache_tag(unsigned long addr, unsigned long tag)
{
__asm__ __volatile__("stxa %0, [%1] %2\n\t"
"membar #Sync"
@@ -81,7 +80,7 @@
* a flush instruction (to any address) is sufficient to handle
* this issue after the line is invalidated.
*/
-static __inline__ void spitfire_put_icache_tag(unsigned long addr, unsigned long tag)
+static inline void spitfire_put_icache_tag(unsigned long addr, unsigned long tag)
{
__asm__ __volatile__("stxa %0, [%1] %2\n\t"
"membar #Sync"
@@ -89,7 +88,7 @@
: "r" (tag), "r" (addr), "i" (ASI_IC_TAG));
}
-static __inline__ unsigned long spitfire_get_dtlb_data(int entry)
+static inline unsigned long spitfire_get_dtlb_data(int entry)
{
unsigned long data;
@@ -103,7 +102,7 @@
return data;
}
-static __inline__ unsigned long spitfire_get_dtlb_tag(int entry)
+static inline unsigned long spitfire_get_dtlb_tag(int entry)
{
unsigned long tag;
@@ -113,7 +112,7 @@
return tag;
}
-static __inline__ void spitfire_put_dtlb_data(int entry, unsigned long data)
+static inline void spitfire_put_dtlb_data(int entry, unsigned long data)
{
__asm__ __volatile__("stxa %0, [%1] %2\n\t"
"membar #Sync"
@@ -122,7 +121,7 @@
"i" (ASI_DTLB_DATA_ACCESS));
}
-static __inline__ unsigned long spitfire_get_itlb_data(int entry)
+static inline unsigned long spitfire_get_itlb_data(int entry)
{
unsigned long data;
@@ -136,7 +135,7 @@
return data;
}
-static __inline__ unsigned long spitfire_get_itlb_tag(int entry)
+static inline unsigned long spitfire_get_itlb_tag(int entry)
{
unsigned long tag;
@@ -146,7 +145,7 @@
return tag;
}
-static __inline__ void spitfire_put_itlb_data(int entry, unsigned long data)
+static inline void spitfire_put_itlb_data(int entry, unsigned long data)
{
__asm__ __volatile__("stxa %0, [%1] %2\n\t"
"membar #Sync"
@@ -155,7 +154,7 @@
"i" (ASI_ITLB_DATA_ACCESS));
}
-static __inline__ void spitfire_flush_dtlb_nucleus_page(unsigned long page)
+static inline void spitfire_flush_dtlb_nucleus_page(unsigned long page)
{
__asm__ __volatile__("stxa %%g0, [%0] %1\n\t"
"membar #Sync"
@@ -163,7 +162,7 @@
: "r" (page | 0x20), "i" (ASI_DMMU_DEMAP));
}
-static __inline__ void spitfire_flush_itlb_nucleus_page(unsigned long page)
+static inline void spitfire_flush_itlb_nucleus_page(unsigned long page)
{
__asm__ __volatile__("stxa %%g0, [%0] %1\n\t"
"membar #Sync"
@@ -172,7 +171,7 @@
}
/* Cheetah has "all non-locked" tlb flushes. */
-static __inline__ void cheetah_flush_dtlb_all(void)
+static inline void cheetah_flush_dtlb_all(void)
{
__asm__ __volatile__("stxa %%g0, [%0] %1\n\t"
"membar #Sync"
@@ -180,7 +179,7 @@
: "r" (0x80), "i" (ASI_DMMU_DEMAP));
}
-static __inline__ void cheetah_flush_itlb_all(void)
+static inline void cheetah_flush_itlb_all(void)
{
__asm__ __volatile__("stxa %%g0, [%0] %1\n\t"
"membar #Sync"
@@ -202,7 +201,7 @@
* ASI_{D,I}TLB_DATA_ACCESS loads, doing the load twice fixes
* the problem for me. -DaveM
*/
-static __inline__ unsigned long cheetah_get_ldtlb_data(int entry)
+static inline unsigned long cheetah_get_ldtlb_data(int entry)
{
unsigned long data;
@@ -215,7 +214,7 @@
return data;
}
-static __inline__ unsigned long cheetah_get_litlb_data(int entry)
+static inline unsigned long cheetah_get_litlb_data(int entry)
{
unsigned long data;
@@ -228,7 +227,7 @@
return data;
}
-static __inline__ unsigned long cheetah_get_ldtlb_tag(int entry)
+static inline unsigned long cheetah_get_ldtlb_tag(int entry)
{
unsigned long tag;
@@ -240,7 +239,7 @@
return tag;
}
-static __inline__ unsigned long cheetah_get_litlb_tag(int entry)
+static inline unsigned long cheetah_get_litlb_tag(int entry)
{
unsigned long tag;
@@ -252,7 +251,7 @@
return tag;
}
-static __inline__ void cheetah_put_ldtlb_data(int entry, unsigned long data)
+static inline void cheetah_put_ldtlb_data(int entry, unsigned long data)
{
__asm__ __volatile__("stxa %0, [%1] %2\n\t"
"membar #Sync"
@@ -262,7 +261,7 @@
"i" (ASI_DTLB_DATA_ACCESS));
}
-static __inline__ void cheetah_put_litlb_data(int entry, unsigned long data)
+static inline void cheetah_put_litlb_data(int entry, unsigned long data)
{
__asm__ __volatile__("stxa %0, [%1] %2\n\t"
"membar #Sync"
@@ -272,7 +271,7 @@
"i" (ASI_ITLB_DATA_ACCESS));
}
-static __inline__ unsigned long cheetah_get_dtlb_data(int entry, int tlb)
+static inline unsigned long cheetah_get_dtlb_data(int entry, int tlb)
{
unsigned long data;
@@ -284,7 +283,7 @@
return data;
}
-static __inline__ unsigned long cheetah_get_dtlb_tag(int entry, int tlb)
+static inline unsigned long cheetah_get_dtlb_tag(int entry, int tlb)
{
unsigned long tag;
@@ -294,7 +293,7 @@
return tag;
}
-static __inline__ void cheetah_put_dtlb_data(int entry, unsigned long data, int tlb)
+static inline void cheetah_put_dtlb_data(int entry, unsigned long data, int tlb)
{
__asm__ __volatile__("stxa %0, [%1] %2\n\t"
"membar #Sync"
@@ -304,7 +303,7 @@
"i" (ASI_DTLB_DATA_ACCESS));
}
-static __inline__ unsigned long cheetah_get_itlb_data(int entry)
+static inline unsigned long cheetah_get_itlb_data(int entry)
{
unsigned long data;
@@ -317,7 +316,7 @@
return data;
}
-static __inline__ unsigned long cheetah_get_itlb_tag(int entry)
+static inline unsigned long cheetah_get_itlb_tag(int entry)
{
unsigned long tag;
@@ -327,7 +326,7 @@
return tag;
}
-static __inline__ void cheetah_put_itlb_data(int entry, unsigned long data)
+static inline void cheetah_put_itlb_data(int entry, unsigned long data)
{
__asm__ __volatile__("stxa %0, [%1] %2\n\t"
"membar #Sync"
diff --git a/include/asm-sparc64/system.h b/include/asm-sparc64/system.h
index 3f175fa..99a669c 100644
--- a/include/asm-sparc64/system.h
+++ b/include/asm-sparc64/system.h
@@ -1,4 +1,3 @@
-/* $Id: system.h,v 1.69 2002/02/09 19:49:31 davem Exp $ */
#ifndef __SPARC64_SYSTEM_H
#define __SPARC64_SYSTEM_H
@@ -179,7 +178,9 @@
"ldx [%%g6 + %9], %%g4\n\t" \
"brz,pt %%o7, 1f\n\t" \
" mov %%g7, %0\n\t" \
- "b,a ret_from_syscall\n\t" \
+ "sethi %%hi(ret_from_syscall), %%g1\n\t" \
+ "jmpl %%g1 + %%lo(ret_from_syscall), %%g0\n\t" \
+ " nop\n\t" \
"1:\n\t" \
: "=&r" (last), "=r" (current), "=r" (current_thread_info_reg), \
"=r" (__local_per_cpu_offset) \
@@ -240,7 +241,7 @@
extern void __xchg_called_with_bad_pointer(void);
-static __inline__ unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
+static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
int size)
{
switch (size) {
@@ -263,7 +264,7 @@
#define __HAVE_ARCH_CMPXCHG 1
-static __inline__ unsigned long
+static inline unsigned long
__cmpxchg_u32(volatile int *m, int old, int new)
{
__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
@@ -276,7 +277,7 @@
return new;
}
-static __inline__ unsigned long
+static inline unsigned long
__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
{
__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
@@ -293,7 +294,7 @@
if something tries to do an invalid cmpxchg(). */
extern void __cmpxchg_called_with_bad_pointer(void);
-static __inline__ unsigned long
+static inline unsigned long
__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
{
switch (size) {
diff --git a/include/asm-sparc64/uaccess.h b/include/asm-sparc64/uaccess.h
index afe236b..93720e7 100644
--- a/include/asm-sparc64/uaccess.h
+++ b/include/asm-sparc64/uaccess.h
@@ -123,7 +123,8 @@
".section .fixup,#alloc,#execinstr\n\t" \
".align 4\n" \
"3:\n\t" \
- "b 2b\n\t" \
+ "sethi %%hi(2b), %0\n\t" \
+ "jmpl %0 + %%lo(2b), %%g0\n\t" \
" mov %3, %0\n\n\t" \
".previous\n\t" \
".section __ex_table,\"a\"\n\t" \
@@ -165,8 +166,9 @@
".section .fixup,#alloc,#execinstr\n\t" \
".align 4\n" \
"3:\n\t" \
+ "sethi %%hi(2b), %0\n\t" \
"clr %1\n\t" \
- "b 2b\n\t" \
+ "jmpl %0 + %%lo(2b), %%g0\n\t" \
" mov %3, %0\n\n\t" \
".previous\n\t" \
".section __ex_table,\"a\"\n\t" \
diff --git a/include/asm-sparc64/upa.h b/include/asm-sparc64/upa.h
index 7ae09a2..5b16332 100644
--- a/include/asm-sparc64/upa.h
+++ b/include/asm-sparc64/upa.h
@@ -1,4 +1,3 @@
-/* $Id: upa.h,v 1.3 1999/09/21 14:39:47 davem Exp $ */
#ifndef _SPARC64_UPA_H
#define _SPARC64_UPA_H
@@ -25,7 +24,7 @@
/* UPA I/O space accessors */
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
-static __inline__ unsigned char _upa_readb(unsigned long addr)
+static inline unsigned char _upa_readb(unsigned long addr)
{
unsigned char ret;
@@ -36,7 +35,7 @@
return ret;
}
-static __inline__ unsigned short _upa_readw(unsigned long addr)
+static inline unsigned short _upa_readw(unsigned long addr)
{
unsigned short ret;
@@ -47,7 +46,7 @@
return ret;
}
-static __inline__ unsigned int _upa_readl(unsigned long addr)
+static inline unsigned int _upa_readl(unsigned long addr)
{
unsigned int ret;
@@ -58,7 +57,7 @@
return ret;
}
-static __inline__ unsigned long _upa_readq(unsigned long addr)
+static inline unsigned long _upa_readq(unsigned long addr)
{
unsigned long ret;
@@ -69,28 +68,28 @@
return ret;
}
-static __inline__ void _upa_writeb(unsigned char b, unsigned long addr)
+static inline void _upa_writeb(unsigned char b, unsigned long addr)
{
__asm__ __volatile__("stba\t%0, [%1] %2\t/* upa_writeb */"
: /* no outputs */
: "r" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
}
-static __inline__ void _upa_writew(unsigned short w, unsigned long addr)
+static inline void _upa_writew(unsigned short w, unsigned long addr)
{
__asm__ __volatile__("stha\t%0, [%1] %2\t/* upa_writew */"
: /* no outputs */
: "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
}
-static __inline__ void _upa_writel(unsigned int l, unsigned long addr)
+static inline void _upa_writel(unsigned int l, unsigned long addr)
{
__asm__ __volatile__("stwa\t%0, [%1] %2\t/* upa_writel */"
: /* no outputs */
: "r" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
}
-static __inline__ void _upa_writeq(unsigned long q, unsigned long addr)
+static inline void _upa_writeq(unsigned long q, unsigned long addr)
{
__asm__ __volatile__("stxa\t%0, [%1] %2\t/* upa_writeq */"
: /* no outputs */
diff --git a/include/asm-sparc64/visasm.h b/include/asm-sparc64/visasm.h
index a740785..34f2ec64 100644
--- a/include/asm-sparc64/visasm.h
+++ b/include/asm-sparc64/visasm.h
@@ -1,4 +1,3 @@
-/* $Id: visasm.h,v 1.5 2001/04/24 01:09:12 davem Exp $ */
#ifndef _SPARC64_VISASM_H
#define _SPARC64_VISASM_H
@@ -44,7 +43,7 @@
wr %o5, 0, %fprs;
#ifndef __ASSEMBLY__
-static __inline__ void save_and_clear_fpu(void) {
+static inline void save_and_clear_fpu(void) {
__asm__ __volatile__ (
" rd %%fprs, %%o5\n"
" andcc %%o5, %0, %%g0\n"
diff --git a/include/asm-um/unistd.h b/include/asm-um/unistd.h
index 732c83f..38bd9d94 100644
--- a/include/asm-um/unistd.h
+++ b/include/asm-um/unistd.h
@@ -14,7 +14,6 @@
#ifdef __KERNEL__
/* We get __ARCH_WANT_OLD_STAT and __ARCH_WANT_STAT64 from the base arch */
-#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_SYS_ALARM
#define __ARCH_WANT_SYS_GETHOSTNAME
diff --git a/include/asm-x86/bitops_32.h b/include/asm-x86/bitops_32.h
index 36ebb5b..0b40f6d 100644
--- a/include/asm-x86/bitops_32.h
+++ b/include/asm-x86/bitops_32.h
@@ -183,9 +183,12 @@
* @nr: Bit to set
* @addr: Address to count from
*
- * This is the same as test_and_set_bit on x86
+ * This is the same as test_and_set_bit on x86.
*/
-#define test_and_set_bit_lock test_and_set_bit
+static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr)
+{
+ return test_and_set_bit(nr, addr);
+}
/**
* __test_and_set_bit - Set a bit and return its old value
diff --git a/include/asm-x86/bitops_64.h b/include/asm-x86/bitops_64.h
index b4d4794..766bcc0 100644
--- a/include/asm-x86/bitops_64.h
+++ b/include/asm-x86/bitops_64.h
@@ -29,7 +29,7 @@
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
-static __inline__ void set_bit(int nr, volatile void * addr)
+static inline void set_bit(int nr, volatile void *addr)
{
__asm__ __volatile__( LOCK_PREFIX
"btsl %1,%0"
@@ -46,7 +46,7 @@
* If it's called on the same region of memory simultaneously, the effect
* may be that only one operation succeeds.
*/
-static __inline__ void __set_bit(int nr, volatile void * addr)
+static inline void __set_bit(int nr, volatile void *addr)
{
__asm__ volatile(
"btsl %1,%0"
@@ -64,7 +64,7 @@
* you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
* in order to ensure changes are visible on other processors.
*/
-static __inline__ void clear_bit(int nr, volatile void * addr)
+static inline void clear_bit(int nr, volatile void *addr)
{
__asm__ __volatile__( LOCK_PREFIX
"btrl %1,%0"
@@ -86,7 +86,7 @@
clear_bit(nr, addr);
}
-static __inline__ void __clear_bit(int nr, volatile void * addr)
+static inline void __clear_bit(int nr, volatile void *addr)
{
__asm__ __volatile__(
"btrl %1,%0"
@@ -124,7 +124,7 @@
* If it's called on the same region of memory simultaneously, the effect
* may be that only one operation succeeds.
*/
-static __inline__ void __change_bit(int nr, volatile void * addr)
+static inline void __change_bit(int nr, volatile void *addr)
{
__asm__ __volatile__(
"btcl %1,%0"
@@ -141,7 +141,7 @@
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
-static __inline__ void change_bit(int nr, volatile void * addr)
+static inline void change_bit(int nr, volatile void *addr)
{
__asm__ __volatile__( LOCK_PREFIX
"btcl %1,%0"
@@ -157,7 +157,7 @@
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
-static __inline__ int test_and_set_bit(int nr, volatile void * addr)
+static inline int test_and_set_bit(int nr, volatile void *addr)
{
int oldbit;
@@ -173,9 +173,12 @@
* @nr: Bit to set
* @addr: Address to count from
*
- * This is the same as test_and_set_bit on x86
+ * This is the same as test_and_set_bit on x86.
*/
-#define test_and_set_bit_lock test_and_set_bit
+static inline int test_and_set_bit_lock(int nr, volatile void *addr)
+{
+ return test_and_set_bit(nr, addr);
+}
/**
* __test_and_set_bit - Set a bit and return its old value
@@ -186,7 +189,7 @@
* If two examples of this operation race, one can appear to succeed
* but actually fail. You must protect multiple accesses with a lock.
*/
-static __inline__ int __test_and_set_bit(int nr, volatile void * addr)
+static inline int __test_and_set_bit(int nr, volatile void *addr)
{
int oldbit;
@@ -205,7 +208,7 @@
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
-static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
+static inline int test_and_clear_bit(int nr, volatile void *addr)
{
int oldbit;
@@ -225,7 +228,7 @@
* If two examples of this operation race, one can appear to succeed
* but actually fail. You must protect multiple accesses with a lock.
*/
-static __inline__ int __test_and_clear_bit(int nr, volatile void * addr)
+static inline int __test_and_clear_bit(int nr, volatile void *addr)
{
int oldbit;
@@ -237,7 +240,7 @@
}
/* WARNING: non atomic and it can be reordered! */
-static __inline__ int __test_and_change_bit(int nr, volatile void * addr)
+static inline int __test_and_change_bit(int nr, volatile void *addr)
{
int oldbit;
@@ -256,7 +259,7 @@
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
-static __inline__ int test_and_change_bit(int nr, volatile void * addr)
+static inline int test_and_change_bit(int nr, volatile void *addr)
{
int oldbit;
@@ -273,15 +276,15 @@
* @nr: bit number to test
* @addr: Address to start counting from
*/
-static int test_bit(int nr, const volatile void * addr);
+static int test_bit(int nr, const volatile void *addr);
#endif
-static __inline__ int constant_test_bit(int nr, const volatile void * addr)
+static inline int constant_test_bit(int nr, const volatile void *addr)
{
return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
}
-static __inline__ int variable_test_bit(int nr, volatile const void * addr)
+static inline int variable_test_bit(int nr, volatile const void *addr)
{
int oldbit;
@@ -299,10 +302,10 @@
#undef ADDR
-extern long find_first_zero_bit(const unsigned long * addr, unsigned long size);
-extern long find_next_zero_bit (const unsigned long * addr, long size, long offset);
-extern long find_first_bit(const unsigned long * addr, unsigned long size);
-extern long find_next_bit(const unsigned long * addr, long size, long offset);
+extern long find_first_zero_bit(const unsigned long *addr, unsigned long size);
+extern long find_next_zero_bit(const unsigned long *addr, long size, long offset);
+extern long find_first_bit(const unsigned long *addr, unsigned long size);
+extern long find_next_bit(const unsigned long *addr, long size, long offset);
/* return index of first bet set in val or max when no bit is set */
static inline long __scanbit(unsigned long val, unsigned long max)
@@ -363,7 +366,7 @@
*
* Undefined if no zero exists, so code should check against ~0UL first.
*/
-static __inline__ unsigned long ffz(unsigned long word)
+static inline unsigned long ffz(unsigned long word)
{
__asm__("bsfq %1,%0"
:"=r" (word)
@@ -377,7 +380,7 @@
*
* Undefined if no bit exists, so code should check against 0 first.
*/
-static __inline__ unsigned long __ffs(unsigned long word)
+static inline unsigned long __ffs(unsigned long word)
{
__asm__("bsfq %1,%0"
:"=r" (word)
@@ -391,7 +394,7 @@
*
* Undefined if no zero exists, so code should check against ~0UL first.
*/
-static __inline__ unsigned long __fls(unsigned long word)
+static inline unsigned long __fls(unsigned long word)
{
__asm__("bsrq %1,%0"
:"=r" (word)
@@ -411,7 +414,7 @@
* the libc and compiler builtin ffs routines, therefore
* differs in spirit from the above ffz (man ffs).
*/
-static __inline__ int ffs(int x)
+static inline int ffs(int x)
{
int r;
@@ -427,7 +430,7 @@
*
* This is defined the same way as fls.
*/
-static __inline__ int fls64(__u64 x)
+static inline int fls64(__u64 x)
{
if (x == 0)
return 0;
@@ -440,7 +443,7 @@
*
* This is defined the same way as ffs.
*/
-static __inline__ int fls(int x)
+static inline int fls(int x)
{
int r;
diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h
new file mode 100644
index 0000000..f704c50
--- /dev/null
+++ b/include/asm-x86/gart.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_X8664_IOMMU_H
+#define _ASM_X8664_IOMMU_H 1
+
+extern void pci_iommu_shutdown(void);
+extern void no_iommu_init(void);
+extern int force_iommu, no_iommu;
+extern int iommu_detected;
+#ifdef CONFIG_GART_IOMMU
+extern void gart_iommu_init(void);
+extern void gart_iommu_shutdown(void);
+extern void __init gart_parse_options(char *);
+extern void gart_iommu_hole_init(void);
+extern int fallback_aper_order;
+extern int fallback_aper_force;
+extern int gart_iommu_aperture;
+extern int gart_iommu_aperture_allowed;
+extern int gart_iommu_aperture_disabled;
+extern int fix_aperture;
+#else
+#define gart_iommu_aperture 0
+#define gart_iommu_aperture_allowed 0
+
+static inline void gart_iommu_shutdown(void)
+{
+}
+
+#endif
+
+#endif
diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h
index 5af471f..07862fd 100644
--- a/include/asm-x86/iommu.h
+++ b/include/asm-x86/iommu.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X8664_IOMMU_H
-#define _ASM_X8664_IOMMU_H 1
+#ifndef _ASM_X8664_GART_H
+#define _ASM_X8664_GART_H 1
extern void pci_iommu_shutdown(void);
extern void no_iommu_init(void);
diff --git a/include/asm-x86/lguest_hcall.h b/include/asm-x86/lguest_hcall.h
index f948491..9c5092b 100644
--- a/include/asm-x86/lguest_hcall.h
+++ b/include/asm-x86/lguest_hcall.h
@@ -18,12 +18,17 @@
#define LHCALL_LOAD_TLS 16
#define LHCALL_NOTIFY 17
+#define LGUEST_TRAP_ENTRY 0x1F
+
+#ifndef __ASSEMBLY__
+#include <asm/hw_irq.h>
+
/*G:031 First, how does our Guest contact the Host to ask for privileged
* operations? There are two ways: the direct way is to make a "hypercall",
* to make requests of the Host Itself.
*
* Our hypercall mechanism uses the highest unused trap code (traps 32 and
- * above are used by real hardware interrupts). Seventeen hypercalls are
+ * above are used by real hardware interrupts). Fifteen hypercalls are
* available: the hypercall number is put in the %eax register, and the
* arguments (when required) are placed in %edx, %ebx and %ecx. If a return
* value makes sense, it's returned in %eax.
@@ -31,20 +36,15 @@
* Grossly invalid calls result in Sudden Death at the hands of the vengeful
* Host, rather than returning failure. This reflects Winston Churchill's
* definition of a gentleman: "someone who is only rude intentionally". */
-#define LGUEST_TRAP_ENTRY 0x1F
-
-#ifndef __ASSEMBLY__
-#include <asm/hw_irq.h>
-
static inline unsigned long
hcall(unsigned long call,
unsigned long arg1, unsigned long arg2, unsigned long arg3)
{
/* "int" is the Intel instruction to trigger a trap. */
asm volatile("int $" __stringify(LGUEST_TRAP_ENTRY)
- /* The call is in %eax (aka "a"), and can be replaced */
+ /* The call in %eax (aka "a") might be overwritten */
: "=a"(call)
- /* The other arguments are in %eax, %edx, %ebx & %ecx */
+ /* The arguments are in %eax, %edx, %ebx & %ecx */
: "a"(call), "d"(arg1), "b"(arg2), "c"(arg3)
/* "memory" means this might write somewhere in memory.
* This isn't true for all calls, but it's safe to tell
diff --git a/include/asm-x86/pci_64.h b/include/asm-x86/pci_64.h
index 9baa46d..ef54226 100644
--- a/include/asm-x86/pci_64.h
+++ b/include/asm-x86/pci_64.h
@@ -37,7 +37,7 @@
*/
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-#if defined(CONFIG_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
+#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
diff --git a/include/asm-x86/smp_32.h b/include/asm-x86/smp_32.h
index 7056d86..e10b7af 100644
--- a/include/asm-x86/smp_32.h
+++ b/include/asm-x86/smp_32.h
@@ -94,9 +94,12 @@
{
smp_ops.smp_send_reschedule(cpu);
}
-extern int smp_call_function_mask(cpumask_t mask,
- void (*func) (void *info), void *info,
- int wait);
+static inline int smp_call_function_mask(cpumask_t mask,
+ void (*func) (void *info), void *info,
+ int wait)
+{
+ return smp_ops.smp_call_function_mask(mask, func, info, wait);
+}
void native_smp_prepare_boot_cpu(void);
void native_smp_prepare_cpus(unsigned int max_cpus);
diff --git a/include/asm-xtensa/dma-mapping.h b/include/asm-xtensa/dma-mapping.h
index 8bd9d2c..3c7d537 100644
--- a/include/asm-xtensa/dma-mapping.h
+++ b/include/asm-xtensa/dma-mapping.h
@@ -11,10 +11,10 @@
#ifndef _XTENSA_DMA_MAPPING_H
#define _XTENSA_DMA_MAPPING_H
-#include <asm/scatterlist.h>
#include <asm/cache.h>
#include <asm/io.h>
#include <linux/mm.h>
+#include <linux/scatterlist.h>
/*
* DMA-consistent mapping functions.
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 6a65231..37bfa19 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -149,6 +149,7 @@
header-y += times.h
header-y += tiocl.h
header-y += tipc.h
+header-y += tipc_config.h
header-y += toshiba.h
header-y += ultrasound.h
header-y += un.h
@@ -325,6 +326,7 @@
unifdef-y += soundcard.h
unifdef-y += stat.h
unifdef-y += stddef.h
+unifdef-y += string.h
unifdef-y += synclink.h
unifdef-y += sysctl.h
unifdef-y += tcp.h
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 8263a7b..61535e7 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -43,6 +43,7 @@
ATA_MAX_SECTORS_128 = 128,
ATA_MAX_SECTORS = 256,
ATA_MAX_SECTORS_LBA48 = 65535,/* TODO: 65536? */
+ ATA_MAX_SECTORS_TAPE = 65535,
ATA_ID_WORDS = 256,
ATA_ID_SERNO = 10,
@@ -180,6 +181,7 @@
ATA_CMD_VERIFY_EXT = 0x42,
ATA_CMD_STANDBYNOW1 = 0xE0,
ATA_CMD_IDLEIMMEDIATE = 0xE1,
+ ATA_CMD_SLEEP = 0xE6,
ATA_CMD_INIT_DEV_PARAMS = 0x91,
ATA_CMD_READ_NATIVE_MAX = 0xF8,
ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
@@ -235,6 +237,7 @@
/* SETFEATURE Sector counts for SATA features */
SATA_AN = 0x05, /* Asynchronous Notification */
+ SATA_DIPM = 0x03, /* Device Initiated Power Management */
/* ATAPI stuff */
ATAPI_PKT_DMA = (1 << 0),
@@ -377,6 +380,26 @@
#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20)
+static inline bool ata_id_has_hipm(const u16 *id)
+{
+ u16 val = id[76];
+
+ if (val == 0 || val == 0xffff)
+ return false;
+
+ return val & (1 << 9);
+}
+
+static inline bool ata_id_has_dipm(const u16 *id)
+{
+ u16 val = id[78];
+
+ if (val == 0 || val == 0xffff)
+ return false;
+
+ return val & (1 << 3);
+}
+
static inline int ata_id_has_fua(const u16 *id)
{
if ((id[84] & 0xC000) != 0x4000)
@@ -522,6 +545,11 @@
}
}
+static inline int atapi_command_packet_set(const u16 *dev_id)
+{
+ return (dev_id[0] >> 8) & 0x1f;
+}
+
static inline int is_atapi_taskfile(const struct ata_taskfile *tf)
{
return (tf->protocol == ATA_PROT_ATAPI) ||
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index bbf906a..8396db2 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -341,7 +341,6 @@
struct blk_queue_tag {
struct request **tag_index; /* map of busy tags */
unsigned long *tag_map; /* bit map of free/busy tags */
- struct list_head busy_list; /* fifo list of busy tags */
int busy; /* current depth */
int max_depth; /* what we will send to device */
int real_max_depth; /* what the array can hold */
@@ -435,6 +434,7 @@
unsigned int dma_alignment;
struct blk_queue_tag *queue_tags;
+ struct list_head tag_busy_list;
unsigned int nr_sorted;
unsigned int in_flight;
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index c83534e..0365ec9 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -59,7 +59,6 @@
unsigned long align,
unsigned long goal,
unsigned long limit);
-extern void *alloc_bootmem_high_node(pg_data_t *pgdat, unsigned long size);
#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE
extern void reserve_bootmem(unsigned long addr, unsigned long size);
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index c811c8b..c68b67b 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -101,6 +101,12 @@
#undef __must_check
#define __must_check
#endif
+#ifndef CONFIG_ENABLE_WARN_DEPRECATED
+#undef __deprecated
+#undef __deprecated_for_modules
+#define __deprecated
+#define __deprecated_for_modules
+#endif
/*
* Allow us to avoid 'defined but not used' warnings on functions and data,
diff --git a/include/linux/completion.h b/include/linux/completion.h
index 268c5a4a..33d6aaf 100644
--- a/include/linux/completion.h
+++ b/include/linux/completion.h
@@ -42,15 +42,15 @@
init_waitqueue_head(&x->wait);
}
-extern void FASTCALL(wait_for_completion(struct completion *));
-extern int FASTCALL(wait_for_completion_interruptible(struct completion *x));
-extern unsigned long FASTCALL(wait_for_completion_timeout(struct completion *x,
- unsigned long timeout));
-extern unsigned long FASTCALL(wait_for_completion_interruptible_timeout(
- struct completion *x, unsigned long timeout));
+extern void wait_for_completion(struct completion *);
+extern int wait_for_completion_interruptible(struct completion *x);
+extern unsigned long wait_for_completion_timeout(struct completion *x,
+ unsigned long timeout);
+extern unsigned long wait_for_completion_interruptible_timeout(
+ struct completion *x, unsigned long timeout);
-extern void FASTCALL(complete(struct completion *));
-extern void FASTCALL(complete_all(struct completion *));
+extern void complete(struct completion *);
+extern void complete_all(struct completion *);
#define INIT_COMPLETION(x) ((x).done = 0)
diff --git a/include/linux/dccp.h b/include/linux/dccp.h
index f3fc439..333c3ea 100644
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@@ -144,6 +144,8 @@
DCCP_RESET_CODE_TOO_BUSY,
DCCP_RESET_CODE_BAD_INIT_COOKIE,
DCCP_RESET_CODE_AGGRESSION_PENALTY,
+
+ DCCP_MAX_RESET_CODES /* Leave at the end! */
};
/* DCCP options */
@@ -270,10 +272,9 @@
return memset(skb_transport_header(skb), 0, headlen);
}
-static inline struct dccp_hdr_ext *dccp_hdrx(const struct sk_buff *skb)
+static inline struct dccp_hdr_ext *dccp_hdrx(const struct dccp_hdr *dh)
{
- return (struct dccp_hdr_ext *)(skb_transport_header(skb) +
- sizeof(struct dccp_hdr));
+ return (struct dccp_hdr_ext *)((unsigned char *)dh + sizeof(*dh));
}
static inline unsigned int __dccp_basic_hdr_len(const struct dccp_hdr *dh)
@@ -287,13 +288,12 @@
return __dccp_basic_hdr_len(dh);
}
-static inline __u64 dccp_hdr_seq(const struct sk_buff *skb)
+static inline __u64 dccp_hdr_seq(const struct dccp_hdr *dh)
{
- const struct dccp_hdr *dh = dccp_hdr(skb);
__u64 seq_nr = ntohs(dh->dccph_seq);
if (dh->dccph_x != 0)
- seq_nr = (seq_nr << 32) + ntohl(dccp_hdrx(skb)->dccph_seq_low);
+ seq_nr = (seq_nr << 32) + ntohl(dccp_hdrx(dh)->dccph_seq_low);
else
seq_nr += (u32)dh->dccph_seq2 << 16;
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index d2a96cb..cf79853 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -32,18 +32,13 @@
* On x86-64 make the 64bit structure have the same alignment as the
* 32bit structure. This makes 32bit emulation easier.
*
- * UML/x86_64 needs the same packing as x86_64 - UML + UML_X86 +
- * 64_BIT adds up to UML/x86_64.
+ * UML/x86_64 needs the same packing as x86_64
*/
#ifdef __x86_64__
#define EPOLL_PACKED __attribute__((packed))
#else
-#if defined(CONFIG_UML) && defined(CONFIG_UML_X86) && defined(CONFIG_64BIT)
-#define EPOLL_PACKED __attribute__((packed))
-#else
#define EPOLL_PACKED
#endif
-#endif
struct epoll_event {
__u32 events;
diff --git a/include/linux/input.h b/include/linux/input.h
index 6226892..b45f240 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -527,6 +527,9 @@
#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
#define KEY_LOGOFF 0x1b1 /* AL Logoff */
+#define KEY_DOLLAR 0x1b2
+#define KEY_EURO 0x1b3
+
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
#define KEY_INS_LINE 0x1c2
diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h
index 56ae438..6e8cec5 100644
--- a/include/linux/ipmi_smi.h
+++ b/include/linux/ipmi_smi.h
@@ -173,7 +173,7 @@
id->firmware_revision_2 = data[3];
id->ipmi_version = data[4];
id->additional_device_support = data[5];
- if (data_len >= 6) {
+ if (data_len >= 11) {
id->manufacturer_id = (data[6] | (data[7] << 8) |
(data[8] << 16));
id->product_id = data[9] | (data[10] << 8);
diff --git a/include/linux/lguest.h b/include/linux/lguest.h
index 8beb291..175e63f 100644
--- a/include/linux/lguest.h
+++ b/include/linux/lguest.h
@@ -12,8 +12,8 @@
#define LG_CLOCK_MAX_DELTA ULONG_MAX
/*G:032 The second method of communicating with the Host is to via "struct
- * lguest_data". The Guest's very first hypercall is to tell the Host where
- * this is, and then the Guest and Host both publish information in it. :*/
+ * lguest_data". Once the Guest's initialization hypercall tells the Host where
+ * this is, the Guest and Host both publish information in it. :*/
struct lguest_data
{
/* 512 == enabled (same as eflags in normal hardware). The Guest
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
index 61e1e3e..697104d 100644
--- a/include/linux/lguest_launcher.h
+++ b/include/linux/lguest_launcher.h
@@ -1,17 +1,7 @@
-#ifndef _ASM_LGUEST_USER
-#define _ASM_LGUEST_USER
+#ifndef _LINUX_LGUEST_LAUNCHER
+#define _LINUX_LGUEST_LAUNCHER
/* Everything the "lguest" userspace program needs to know. */
#include <linux/types.h>
-/* They can register up to 32 arrays of lguest_dma. */
-#define LGUEST_MAX_DMA 32
-/* At most we can dma 16 lguest_dma in one op. */
-#define LGUEST_MAX_DMA_SECTIONS 16
-
-/* How many devices? Assume each one wants up to two dma arrays per device. */
-#define LGUEST_MAX_DEVICES (LGUEST_MAX_DMA/2)
-
-/* Where the Host expects the Guest to SEND_DMA console output to. */
-#define LGUEST_CONSOLE_DMA_KEY 0
/*D:010
* Drivers
@@ -20,7 +10,11 @@
* real devices (think of the damage it could do!) we provide virtual devices.
* We could emulate a PCI bus with various devices on it, but that is a fairly
* complex burden for the Host and suboptimal for the Guest, so we have our own
- * "lguest" bus and simple drivers.
+ * simple lguest bus and we use "virtio" drivers. These drivers need a set of
+ * routines from us which will actually do the virtual I/O, but they handle all
+ * the net/block/console stuff themselves. This means that if we want to add
+ * a new device, we simply need to write a new virtio driver and create support
+ * for it in the Launcher: this code won't need to change.
*
* Devices are described by a simplified ID, a status byte, and some "config"
* bytes which describe this device's configuration. This is placed by the
@@ -51,9 +45,9 @@
/* Write command first word is a request. */
enum lguest_req
{
- LHREQ_INITIALIZE, /* + pfnlimit, pgdir, start, pageoffset */
+ LHREQ_INITIALIZE, /* + base, pfnlimit, pgdir, start */
LHREQ_GETDMA, /* No longer used */
LHREQ_IRQ, /* + irq */
LHREQ_BREAK, /* + on/off flag (on blocks until someone does off) */
};
-#endif /* _ASM_LGUEST_USER */
+#endif /* _LINUX_LGUEST_LAUNCHER */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 6fd24e0..1e27785 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -133,11 +133,14 @@
ATA_DFLAG_ACPI_PENDING = (1 << 5), /* ACPI resume action pending */
ATA_DFLAG_ACPI_FAILED = (1 << 6), /* ACPI on devcfg has failed */
ATA_DFLAG_AN = (1 << 7), /* AN configured */
+ ATA_DFLAG_HIPM = (1 << 8), /* device supports HIPM */
+ ATA_DFLAG_DIPM = (1 << 9), /* device supports DIPM */
ATA_DFLAG_CFG_MASK = (1 << 12) - 1,
ATA_DFLAG_PIO = (1 << 12), /* device limited to PIO mode */
ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */
ATA_DFLAG_SPUNDOWN = (1 << 14), /* XXX: for spindown_compat */
+ ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */
ATA_DFLAG_INIT_MASK = (1 << 16) - 1,
ATA_DFLAG_DETACH = (1 << 16),
@@ -185,6 +188,7 @@
ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */
ATA_FLAG_AN = (1 << 18), /* controller supports AN */
ATA_FLAG_PMP = (1 << 19), /* controller supports PMP */
+ ATA_FLAG_IPM = (1 << 20), /* driver can handle IPM */
/* The following flag belongs to ap->pflags but is kept in
* ap->flags because it's referenced in many LLDs and will be
@@ -217,6 +221,7 @@
ATA_QCFLAG_IO = (1 << 3), /* standard IO command */
ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */
ATA_QCFLAG_CLEAR_EXCL = (1 << 5), /* clear excl_link on completion */
+ ATA_QCFLAG_QUIET = (1 << 6), /* don't report device error */
ATA_QCFLAG_FAILED = (1 << 16), /* cmd failed and is owned by EH */
ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */
@@ -234,6 +239,13 @@
ATA_TMOUT_INTERNAL = 30 * HZ,
ATA_TMOUT_INTERNAL_QUICK = 5 * HZ,
+ /* FIXME: GoVault needs 2s but we can't afford that without
+ * parallel probing. 800ms is enough for iVDR disk
+ * HHD424020F7SV00. Increase to 2secs when parallel probing
+ * is in place.
+ */
+ ATA_TMOUT_FF_WAIT = 4 * HZ / 5,
+
/* ATA bus states */
BUS_UNKNOWN = 0,
BUS_DMA = 1,
@@ -294,6 +306,7 @@
ATA_EHI_RESUME_LINK = (1 << 1), /* resume link (reset modifier) */
ATA_EHI_NO_AUTOPSY = (1 << 2), /* no autopsy */
ATA_EHI_QUIET = (1 << 3), /* be quiet */
+ ATA_EHI_LPM = (1 << 4), /* link power management action */
ATA_EHI_DID_SOFTRESET = (1 << 16), /* already soft-reset this port */
ATA_EHI_DID_HARDRESET = (1 << 17), /* already soft-reset this port */
@@ -325,6 +338,7 @@
ATA_HORKAGE_BROKEN_HPA = (1 << 4), /* Broken HPA */
ATA_HORKAGE_SKIP_PM = (1 << 5), /* Skip PM operations */
ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */
+ ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
@@ -370,6 +384,18 @@
unsigned long deadline);
typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes);
+/*
+ * host pm policy: If you alter this, you also need to alter libata-scsi.c
+ * (for the ascii descriptions)
+ */
+enum link_pm {
+ NOT_AVAILABLE,
+ MIN_POWER,
+ MAX_PERFORMANCE,
+ MEDIUM_POWER,
+};
+extern struct class_device_attribute class_device_attr_link_power_management_policy;
+
struct ata_ioports {
void __iomem *cmd_addr;
void __iomem *data_addr;
@@ -616,6 +642,7 @@
pm_message_t pm_mesg;
int *pm_result;
+ enum link_pm pm_policy;
struct timer_list fastdrain_timer;
unsigned long fastdrain_cnt;
@@ -683,7 +710,8 @@
int (*port_suspend) (struct ata_port *ap, pm_message_t mesg);
int (*port_resume) (struct ata_port *ap);
-
+ int (*enable_pm) (struct ata_port *ap, enum link_pm policy);
+ void (*disable_pm) (struct ata_port *ap);
int (*port_start) (struct ata_port *ap);
void (*port_stop) (struct ata_port *ap);
@@ -799,6 +827,7 @@
extern int ata_ratelimit(void);
extern int ata_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat, unsigned long timeout);
+extern void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline);
extern int ata_wait_ready(struct ata_port *ap, unsigned long deadline);
extern void ata_port_queue_task(struct ata_port *ap, work_func_t fn,
void *data, unsigned long delay);
diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h
index 3f27239..30e11aa 100644
--- a/include/linux/mv643xx_eth.h
+++ b/include/linux/mv643xx_eth.h
@@ -8,6 +8,9 @@
#define MV643XX_ETH_NAME "mv643xx_eth"
#define MV643XX_ETH_SHARED_REGS 0x2000
#define MV643XX_ETH_SHARED_REGS_SIZE 0x2000
+#define MV643XX_ETH_BAR_4 0x2220
+#define MV643XX_ETH_SIZE_REG_4 0x2224
+#define MV643XX_ETH_BASE_ADDR_ENABLE_REG 0x2290
struct mv643xx_eth_platform_data {
int port_number;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index c4de536..1e6af4f 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -390,7 +390,7 @@
static inline void napi_disable(struct napi_struct *n)
{
while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
- msleep_interruptible(1);
+ msleep(1);
}
/**
@@ -669,6 +669,8 @@
#define HAVE_SET_MAC_ADDR
int (*set_mac_address)(struct net_device *dev,
void *addr);
+#define HAVE_VALIDATE_ADDR
+ int (*validate_addr)(struct net_device *dev);
#define HAVE_PRIVATE_IOCTL
int (*do_ioctl)(struct net_device *dev,
struct ifreq *ifr, int cmd);
@@ -737,6 +739,16 @@
*/
#define SET_NETDEV_DEV(net, pdev) ((net)->dev.parent = (pdev))
+/**
+ * netif_napi_add - initialize a napi context
+ * @dev: network device
+ * @napi: napi context
+ * @poll: polling function
+ * @weight: default weight
+ *
+ * netif_napi_add() must be used to initialize a napi context prior to calling
+ * *any* of the other napi related functions.
+ */
static inline void netif_napi_add(struct net_device *dev,
struct napi_struct *napi,
int (*poll)(struct napi_struct *, int),
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 4e10a07..e44aac8c 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1236,6 +1236,10 @@
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE 0x0560
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE 0x056C
#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE 0x0759
+#define PCI_DEVICE_ID_NVIDIA_NVENET_32 0x0760
+#define PCI_DEVICE_ID_NVIDIA_NVENET_33 0x0761
+#define PCI_DEVICE_ID_NVIDIA_NVENET_34 0x0762
+#define PCI_DEVICE_ID_NVIDIA_NVENET_35 0x0763
#define PCI_VENDOR_ID_IMS 0x10e0
#define PCI_DEVICE_ID_IMS_TT128 0x9128
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index df7ddce..32326c2 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -1,6 +1,7 @@
#ifndef _LINUX_SCATTERLIST_H
#define _LINUX_SCATTERLIST_H
+#include <asm/types.h>
#include <asm/scatterlist.h>
#include <linux/mm.h>
#include <linux/string.h>
@@ -26,18 +27,16 @@
#define SG_MAGIC 0x87654321
/**
- * sg_set_page - Set sg entry to point at given page
- * @sg: SG entry
- * @page: The page
+ * sg_assign_page - Assign a given page to an SG entry
+ * @sg: SG entry
+ * @page: The page
*
* Description:
- * Use this function to set an sg entry pointing at a page, never assign
- * the page directly. We encode sg table information in the lower bits
- * of the page pointer. See sg_page() for looking up the page belonging
- * to an sg entry.
+ * Assign page to sg entry. Also see sg_set_page(), the most commonly used
+ * variant.
*
**/
-static inline void sg_set_page(struct scatterlist *sg, struct page *page)
+static inline void sg_assign_page(struct scatterlist *sg, struct page *page)
{
unsigned long page_link = sg->page_link & 0x3;
@@ -52,6 +51,28 @@
sg->page_link = page_link | (unsigned long) page;
}
+/**
+ * sg_set_page - Set sg entry to point at given page
+ * @sg: SG entry
+ * @page: The page
+ * @len: Length of data
+ * @offset: Offset into page
+ *
+ * Description:
+ * Use this function to set an sg entry pointing at a page, never assign
+ * the page directly. We encode sg table information in the lower bits
+ * of the page pointer. See sg_page() for looking up the page belonging
+ * to an sg entry.
+ *
+ **/
+static inline void sg_set_page(struct scatterlist *sg, struct page *page,
+ unsigned int len, unsigned int offset)
+{
+ sg_assign_page(sg, page);
+ sg->offset = offset;
+ sg->length = len;
+}
+
#define sg_page(sg) ((struct page *) ((sg)->page_link & ~0x3))
/**
@@ -64,9 +85,7 @@
static inline void sg_set_buf(struct scatterlist *sg, const void *buf,
unsigned int buflen)
{
- sg_set_page(sg, virt_to_page(buf));
- sg->offset = offset_in_page(buf);
- sg->length = buflen;
+ sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf));
}
/*
@@ -131,7 +150,7 @@
struct scatterlist *ret = &sgl[nents - 1];
#else
struct scatterlist *sg, *ret = NULL;
- int i;
+ unsigned int i;
for_each_sg(sgl, sg, nents, i)
ret = sg;
@@ -160,7 +179,11 @@
#ifndef ARCH_HAS_SG_CHAIN
BUG();
#endif
- prv[prv_nents - 1].page_link = (unsigned long) sgl | 0x01;
+ /*
+ * Set lowest bit to indicate a link pointer, and make sure to clear
+ * the termination bit if it happens to be set.
+ */
+ prv[prv_nents - 1].page_link = ((unsigned long) sgl | 0x01) & ~0x02;
}
/**
@@ -220,7 +243,7 @@
sg_mark_end(sgl, nents);
#ifdef CONFIG_DEBUG_SG
{
- int i;
+ unsigned int i;
for (i = 0; i < nents; i++)
sgl[i].sg_magic = SG_MAGIC;
}
@@ -237,7 +260,7 @@
* on the sg page.
*
**/
-static inline unsigned long sg_phys(struct scatterlist *sg)
+static inline dma_addr_t sg_phys(struct scatterlist *sg)
{
return page_to_phys(sg_page(sg)) + sg->offset;
}
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 13df99f..155d743 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -828,12 +828,17 @@
struct task_struct * (*pick_next_task) (struct rq *rq);
void (*put_prev_task) (struct rq *rq, struct task_struct *p);
+#ifdef CONFIG_SMP
unsigned long (*load_balance) (struct rq *this_rq, int this_cpu,
- struct rq *busiest,
- unsigned long max_nr_move, unsigned long max_load_move,
+ struct rq *busiest, unsigned long max_load_move,
struct sched_domain *sd, enum cpu_idle_type idle,
int *all_pinned, int *this_best_prio);
+ int (*move_one_task) (struct rq *this_rq, int this_cpu,
+ struct rq *busiest, struct sched_domain *sd,
+ enum cpu_idle_type idle);
+#endif
+
void (*set_curr_task) (struct rq *rq);
void (*task_tick) (struct rq *rq, struct task_struct *p);
void (*task_new) (struct rq *rq, struct task_struct *p);
@@ -1004,6 +1009,7 @@
unsigned int rt_priority;
cputime_t utime, stime, utimescaled, stimescaled;
cputime_t gtime;
+ cputime_t prev_utime, prev_stime;
unsigned long nvcsw, nivcsw; /* context switch counts */
struct timespec start_time; /* monotonic time */
struct timespec real_start_time; /* boot based time */
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index fd4e12f..94e4991 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -994,7 +994,7 @@
*
* Return the number of bytes of free space at the head of an &sk_buff.
*/
-static inline int skb_headroom(const struct sk_buff *skb)
+static inline unsigned int skb_headroom(const struct sk_buff *skb)
{
return skb->data - skb->head;
}
@@ -1347,7 +1347,7 @@
* Returns true if modifying the header part of the cloned buffer
* does not requires the data to be copied.
*/
-static inline int skb_clone_writable(struct sk_buff *skb, int len)
+static inline int skb_clone_writable(struct sk_buff *skb, unsigned int len)
{
return !skb_header_cloned(skb) &&
skb_headroom(skb) + len <= skb->hdr_len;
diff --git a/include/linux/string.h b/include/linux/string.h
index 836062b..c5d3fca 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -3,16 +3,14 @@
/* We don't want strings.h stuff being user by user stuff by accident */
-#ifdef __KERNEL__
+#ifndef __KERNEL__
+#include <string.h>
+#else
#include <linux/compiler.h> /* for inline */
#include <linux/types.h> /* for size_t */
#include <linux/stddef.h> /* for NULL */
-#ifdef __cplusplus
-extern "C" {
-#endif
-
extern char *strndup_user(const char __user *, long);
/*
@@ -111,9 +109,5 @@
extern char **argv_split(gfp_t gfp, const char *str, int *argcp);
extern void argv_free(char **argv);
-#ifdef __cplusplus
-}
-#endif
-
#endif
#endif /* _LINUX_STRING_H_ */
diff --git a/include/linux/sunrpc/rpc_rdma.h b/include/linux/sunrpc/rpc_rdma.h
index 0013a0d..87b895d 100644
--- a/include/linux/sunrpc/rpc_rdma.h
+++ b/include/linux/sunrpc/rpc_rdma.h
@@ -41,17 +41,17 @@
#define _LINUX_SUNRPC_RPC_RDMA_H
struct rpcrdma_segment {
- uint32_t rs_handle; /* Registered memory handle */
- uint32_t rs_length; /* Length of the chunk in bytes */
- uint64_t rs_offset; /* Chunk virtual address or offset */
+ __be32 rs_handle; /* Registered memory handle */
+ __be32 rs_length; /* Length of the chunk in bytes */
+ __be64 rs_offset; /* Chunk virtual address or offset */
};
/*
* read chunk(s), encoded as a linked list.
*/
struct rpcrdma_read_chunk {
- uint32_t rc_discrim; /* 1 indicates presence */
- uint32_t rc_position; /* Position in XDR stream */
+ __be32 rc_discrim; /* 1 indicates presence */
+ __be32 rc_position; /* Position in XDR stream */
struct rpcrdma_segment rc_target;
};
@@ -66,29 +66,29 @@
* write chunk(s), encoded as a counted array.
*/
struct rpcrdma_write_array {
- uint32_t wc_discrim; /* 1 indicates presence */
- uint32_t wc_nchunks; /* Array count */
+ __be32 wc_discrim; /* 1 indicates presence */
+ __be32 wc_nchunks; /* Array count */
struct rpcrdma_write_chunk wc_array[0];
};
struct rpcrdma_msg {
- uint32_t rm_xid; /* Mirrors the RPC header xid */
- uint32_t rm_vers; /* Version of this protocol */
- uint32_t rm_credit; /* Buffers requested/granted */
- uint32_t rm_type; /* Type of message (enum rpcrdma_proc) */
+ __be32 rm_xid; /* Mirrors the RPC header xid */
+ __be32 rm_vers; /* Version of this protocol */
+ __be32 rm_credit; /* Buffers requested/granted */
+ __be32 rm_type; /* Type of message (enum rpcrdma_proc) */
union {
struct { /* no chunks */
- uint32_t rm_empty[3]; /* 3 empty chunk lists */
+ __be32 rm_empty[3]; /* 3 empty chunk lists */
} rm_nochunks;
struct { /* no chunks and padded */
- uint32_t rm_align; /* Padding alignment */
- uint32_t rm_thresh; /* Padding threshold */
- uint32_t rm_pempty[3]; /* 3 empty chunk lists */
+ __be32 rm_align; /* Padding alignment */
+ __be32 rm_thresh; /* Padding threshold */
+ __be32 rm_pempty[3]; /* 3 empty chunk lists */
} rm_padded;
- uint32_t rm_chunks[0]; /* read, write and reply chunks */
+ __be32 rm_chunks[0]; /* read, write and reply chunks */
} rm_body;
};
diff --git a/include/linux/types.h b/include/linux/types.h
index 4f0dad2..f4f8d19 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -37,6 +37,8 @@
typedef __kernel_uid16_t uid16_t;
typedef __kernel_gid16_t gid16_t;
+typedef unsigned long uintptr_t;
+
#ifdef CONFIG_UID16
/* This is defined by include/asm-{arch}/posix_types.h */
typedef __kernel_old_uid_t old_uid_t;
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index 8228b57..4427dcd 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -26,7 +26,6 @@
#include <net/inet_connection_sock.h>
#include <net/inet_sock.h>
-#include <net/route.h>
#include <net/sock.h>
#include <net/tcp_states.h>
@@ -266,11 +265,6 @@
wake_up(&hashinfo->lhash_wait);
}
-static inline int inet_iif(const struct sk_buff *skb)
-{
- return ((struct rtable *)skb->dst)->rt_iif;
-}
-
extern struct sock *__inet_lookup_listener(struct inet_hashinfo *hashinfo,
const __be32 daddr,
const unsigned short hnum,
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index 62daf21..70013c5 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -24,6 +24,7 @@
#include <net/flow.h>
#include <net/sock.h>
#include <net/request_sock.h>
+#include <net/route.h>
/** struct ip_options - IP Options
*
@@ -190,4 +191,10 @@
return inet_ehashfn(laddr, lport, faddr, fport);
}
+
+static inline int inet_iif(const struct sk_buff *skb)
+{
+ return ((struct rtable *)skb->dst)->rt_iif;
+}
+
#endif /* _INET_SOCK_H */
diff --git a/include/net/irda/ircomm_tty.h b/include/net/irda/ircomm_tty.h
index 8dabdd6..eea2e61 100644
--- a/include/net/irda/ircomm_tty.h
+++ b/include/net/irda/ircomm_tty.h
@@ -127,7 +127,6 @@
unsigned int cmd, unsigned long arg);
extern void ircomm_tty_set_termios(struct tty_struct *tty,
struct ktermios *old_termios);
-extern hashbin_t *ircomm_tty;
#endif
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 93aa87d..1fd449a 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -51,13 +51,12 @@
}
#endif
+#ifdef CONFIG_NET_NS
extern void __put_net(struct net *net);
static inline struct net *get_net(struct net *net)
{
-#ifdef CONFIG_NET
atomic_inc(&net->count);
-#endif
return net;
}
@@ -75,26 +74,44 @@
static inline void put_net(struct net *net)
{
-#ifdef CONFIG_NET
if (atomic_dec_and_test(&net->count))
__put_net(net);
-#endif
}
static inline struct net *hold_net(struct net *net)
{
-#ifdef CONFIG_NET
atomic_inc(&net->use_count);
-#endif
return net;
}
static inline void release_net(struct net *net)
{
-#ifdef CONFIG_NET
atomic_dec(&net->use_count);
-#endif
}
+#else
+static inline struct net *get_net(struct net *net)
+{
+ return net;
+}
+
+static inline void put_net(struct net *net)
+{
+}
+
+static inline struct net *hold_net(struct net *net)
+{
+ return net;
+}
+
+static inline void release_net(struct net *net)
+{
+}
+
+static inline struct net *maybe_get_net(struct net *net)
+{
+ return net;
+}
+#endif
#define for_each_net(VAR) \
list_for_each_entry(VAR, &net_namespace_list, list)
@@ -102,11 +119,9 @@
#ifdef CONFIG_NET_NS
#define __net_init
#define __net_exit
-#define __net_initdata
#else
#define __net_init __init
#define __net_exit __exit_refok
-#define __net_initdata __initdata
#endif
struct pernet_operations {
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index a02ec9e..c9265518 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -316,4 +316,19 @@
return rtab->data[slot];
}
+#ifdef CONFIG_NET_CLS_ACT
+static inline struct sk_buff *skb_act_clone(struct sk_buff *skb, gfp_t gfp_mask)
+{
+ struct sk_buff *n = skb_clone(skb, gfp_mask);
+
+ if (n) {
+ n->tc_verd = SET_TC_VERD(n->tc_verd, 0);
+ n->tc_verd = CLR_TC_OK2MUNGE(n->tc_verd);
+ n->tc_verd = CLR_TC_MUNGED(n->tc_verd);
+ n->iif = skb->iif;
+ }
+ return n;
+}
+#endif
+
#endif
diff --git a/include/net/sctp/auth.h b/include/net/sctp/auth.h
index 4945954..5db261a 100644
--- a/include/net/sctp/auth.h
+++ b/include/net/sctp/auth.h
@@ -88,7 +88,6 @@
void sctp_auth_key_put(struct sctp_auth_bytes *key);
struct sctp_shared_key *sctp_auth_shkey_create(__u16 key_id, gfp_t gfp);
-void sctp_auth_shkey_free(struct sctp_shared_key *sh_key);
void sctp_auth_destroy_keys(struct list_head *keys);
int sctp_auth_asoc_init_active_key(struct sctp_association *asoc, gfp_t gfp);
struct sctp_shared_key *sctp_auth_get_shkey(
@@ -104,7 +103,7 @@
void sctp_auth_asoc_set_default_hmac(struct sctp_association *asoc,
struct sctp_hmac_algo_param *hmacs);
int sctp_auth_asoc_verify_hmac_id(const struct sctp_association *asoc,
- __u16 hmac_id);
+ __be16 hmac_id);
int sctp_auth_send_cid(sctp_cid_t chunk, const struct sctp_association *asoc);
int sctp_auth_recv_cid(sctp_cid_t chunk, const struct sctp_association *asoc);
void sctp_auth_calculate_hmac(const struct sctp_association *asoc,
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index 119f5a1..93eb708 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -156,7 +156,6 @@
__u32 sctp_start_cksum(__u8 *ptr, __u16 count);
__u32 sctp_update_cksum(__u8 *ptr, __u16 count, __u32 cksum);
__u32 sctp_end_cksum(__u32 cksum);
-__u32 sctp_update_copy_cksum(__u8 *, __u8 *, __u16 count, __u32 cksum);
/*
* sctp/input.c
diff --git a/include/net/sock.h b/include/net/sock.h
index 43fc3fa..20de3fa 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -779,7 +779,7 @@
extern struct sock *sk_alloc(struct net *net, int family,
gfp_t priority,
- struct proto *prot, int zero_it);
+ struct proto *prot);
extern void sk_free(struct sock *sk);
extern struct sock *sk_clone(const struct sock *sk,
const gfp_t priority);
@@ -993,20 +993,6 @@
write_unlock_bh(&sk->sk_callback_lock);
}
-static inline void sock_copy(struct sock *nsk, const struct sock *osk)
-{
-#ifdef CONFIG_SECURITY_NETWORK
- void *sptr = nsk->sk_security;
-#endif
-
- memcpy(nsk, osk, osk->sk_prot->obj_size);
- get_net(nsk->sk_net);
-#ifdef CONFIG_SECURITY_NETWORK
- nsk->sk_security = sptr;
- security_sk_clone(osk, nsk);
-#endif
-}
-
extern int sock_i_uid(struct sock *sk);
extern unsigned long sock_i_ino(struct sock *sk);
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 92049e6..d695cea 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -803,7 +803,7 @@
return left <= tcp_max_burst(tp);
}
-static inline void tcp_minshall_update(struct tcp_sock *tp, int mss,
+static inline void tcp_minshall_update(struct tcp_sock *tp, unsigned int mss,
const struct sk_buff *skb)
{
if (skb->len < mss)
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 688f6f5..58dfa828 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -37,6 +37,8 @@
extern struct sock *xfrm_nl;
extern u32 sysctl_xfrm_aevent_etime;
extern u32 sysctl_xfrm_aevent_rseqth;
+extern int sysctl_xfrm_larval_drop;
+extern u32 sysctl_xfrm_acq_expires;
extern struct mutex xfrm_cfg_mutex;
diff --git a/init/Kconfig b/init/Kconfig
index b7dffa8..8b88d0b 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -322,7 +322,6 @@
config FAIR_GROUP_SCHED
bool "Fair group CPU scheduler"
default y
- depends on EXPERIMENTAL
help
This feature lets CPU scheduler recognize task groups and control CPU
bandwidth allocation to such task groups.
diff --git a/kernel/fork.c b/kernel/fork.c
index ddafdfa..28a7401 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1056,6 +1056,8 @@
p->gtime = cputime_zero;
p->utimescaled = cputime_zero;
p->stimescaled = cputime_zero;
+ p->prev_utime = cputime_zero;
+ p->prev_stime = cputime_zero;
#ifdef CONFIG_TASK_XACCT
p->rchar = 0; /* I/O counter: bytes read */
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index b6d2ff7..22a2514 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -602,7 +602,7 @@
/* "Retrigger" the interrupt to get things going */
retrigger_next_event(NULL);
local_irq_restore(flags);
- printk(KERN_INFO "Switched to high resolution mode on CPU %d\n",
+ printk(KERN_DEBUG "Switched to high resolution mode on CPU %d\n",
smp_processor_id());
return 1;
}
diff --git a/kernel/profile.c b/kernel/profile.c
index 631b75c..5e95330 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -60,6 +60,7 @@
int par;
if (!strncmp(str, sleepstr, strlen(sleepstr))) {
+#ifdef CONFIG_SCHEDSTATS
prof_on = SLEEP_PROFILING;
if (str[strlen(sleepstr)] == ',')
str += strlen(sleepstr) + 1;
@@ -68,6 +69,10 @@
printk(KERN_INFO
"kernel sleep profiling enabled (shift: %ld)\n",
prof_shift);
+#else
+ printk(KERN_WARNING
+ "kernel sleep profiling requires CONFIG_SCHEDSTATS\n");
+#endif /* CONFIG_SCHEDSTATS */
} else if (!strncmp(str, schedstr, strlen(schedstr))) {
prof_on = SCHED_PROFILING;
if (str[strlen(schedstr)] == ',')
diff --git a/kernel/sched.c b/kernel/sched.c
index 2810e56..3f6bd11 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -66,6 +66,7 @@
#include <linux/pagemap.h>
#include <asm/tlb.h>
+#include <asm/irq_regs.h>
/*
* Scheduler clock - returns current time in nanosec units.
@@ -171,6 +172,7 @@
unsigned long shares;
/* spinlock to serialize modification to shares */
spinlock_t lock;
+ struct rcu_head rcu;
};
/* Default task group's sched entity on each cpu */
@@ -257,7 +259,6 @@
*/
struct list_head leaf_cfs_rq_list; /* Better name : task_cfs_rq_list? */
struct task_group *tg; /* group that "owns" this runqueue */
- struct rcu_head rcu;
#endif
};
@@ -837,11 +838,18 @@
struct task_struct *(*next)(void *);
};
-static int balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_nr_move, unsigned long max_load_move,
- struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned, unsigned long *load_moved,
- int *this_best_prio, struct rq_iterator *iterator);
+#ifdef CONFIG_SMP
+static unsigned long
+balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
+ unsigned long max_load_move, struct sched_domain *sd,
+ enum cpu_idle_type idle, int *all_pinned,
+ int *this_best_prio, struct rq_iterator *iterator);
+
+static int
+iter_move_one_task(struct rq *this_rq, int this_cpu, struct rq *busiest,
+ struct sched_domain *sd, enum cpu_idle_type idle,
+ struct rq_iterator *iterator);
+#endif
#include "sched_stats.h"
#include "sched_idletask.c"
@@ -2223,17 +2231,17 @@
return 1;
}
-static int balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_nr_move, unsigned long max_load_move,
- struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned, unsigned long *load_moved,
- int *this_best_prio, struct rq_iterator *iterator)
+static unsigned long
+balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
+ unsigned long max_load_move, struct sched_domain *sd,
+ enum cpu_idle_type idle, int *all_pinned,
+ int *this_best_prio, struct rq_iterator *iterator)
{
int pulled = 0, pinned = 0, skip_for_load;
struct task_struct *p;
long rem_load_move = max_load_move;
- if (max_nr_move == 0 || max_load_move == 0)
+ if (max_load_move == 0)
goto out;
pinned = 1;
@@ -2266,7 +2274,7 @@
* We only want to steal up to the prescribed number of tasks
* and the prescribed amount of weighted load.
*/
- if (pulled < max_nr_move && rem_load_move > 0) {
+ if (rem_load_move > 0) {
if (p->prio < *this_best_prio)
*this_best_prio = p->prio;
p = iterator->next(iterator->arg);
@@ -2274,7 +2282,7 @@
}
out:
/*
- * Right now, this is the only place pull_task() is called,
+ * Right now, this is one of only two places pull_task() is called,
* so we can safely collect pull_task() stats here rather than
* inside pull_task().
*/
@@ -2282,8 +2290,8 @@
if (all_pinned)
*all_pinned = pinned;
- *load_moved = max_load_move - rem_load_move;
- return pulled;
+
+ return max_load_move - rem_load_move;
}
/*
@@ -2305,7 +2313,7 @@
do {
total_load_moved +=
class->load_balance(this_rq, this_cpu, busiest,
- ULONG_MAX, max_load_move - total_load_moved,
+ max_load_move - total_load_moved,
sd, idle, all_pinned, &this_best_prio);
class = class->next;
} while (class && max_load_move > total_load_moved);
@@ -2313,6 +2321,32 @@
return total_load_moved > 0;
}
+static int
+iter_move_one_task(struct rq *this_rq, int this_cpu, struct rq *busiest,
+ struct sched_domain *sd, enum cpu_idle_type idle,
+ struct rq_iterator *iterator)
+{
+ struct task_struct *p = iterator->start(iterator->arg);
+ int pinned = 0;
+
+ while (p) {
+ if (can_migrate_task(p, busiest, this_cpu, sd, idle, &pinned)) {
+ pull_task(busiest, p, this_rq, this_cpu);
+ /*
+ * Right now, this is only the second place pull_task()
+ * is called, so we can safely collect pull_task()
+ * stats here rather than inside pull_task().
+ */
+ schedstat_inc(sd, lb_gained[idle]);
+
+ return 1;
+ }
+ p = iterator->next(iterator->arg);
+ }
+
+ return 0;
+}
+
/*
* move_one_task tries to move exactly one task from busiest to this_rq, as
* part of active balancing operations within "domain".
@@ -2324,12 +2358,9 @@
struct sched_domain *sd, enum cpu_idle_type idle)
{
const struct sched_class *class;
- int this_best_prio = MAX_PRIO;
for (class = sched_class_highest; class; class = class->next)
- if (class->load_balance(this_rq, this_cpu, busiest,
- 1, ULONG_MAX, sd, idle, NULL,
- &this_best_prio))
+ if (class->move_one_task(this_rq, this_cpu, busiest, sd, idle))
return 1;
return 0;
@@ -3266,18 +3297,6 @@
{
}
-/* Avoid "used but not defined" warning on UP */
-static int balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_nr_move, unsigned long max_load_move,
- struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned, unsigned long *load_moved,
- int *this_best_prio, struct rq_iterator *iterator)
-{
- *load_moved = 0;
-
- return 0;
-}
-
#endif
DEFINE_PER_CPU(struct kernel_stat, kstat);
@@ -3336,7 +3355,7 @@
* @p: the process that the cpu time gets accounted to
* @cputime: the cpu time spent in virtual machine since the last update
*/
-void account_guest_time(struct task_struct *p, cputime_t cputime)
+static void account_guest_time(struct task_struct *p, cputime_t cputime)
{
cputime64_t tmp;
struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
@@ -3507,12 +3526,19 @@
*/
static noinline void __schedule_bug(struct task_struct *prev)
{
- printk(KERN_ERR "BUG: scheduling while atomic: %s/0x%08x/%d\n",
- prev->comm, preempt_count(), task_pid_nr(prev));
+ struct pt_regs *regs = get_irq_regs();
+
+ printk(KERN_ERR "BUG: scheduling while atomic: %s/%d/0x%08x\n",
+ prev->comm, prev->pid, preempt_count());
+
debug_show_held_locks(prev);
if (irqs_disabled())
print_irqtrace_events(prev);
- dump_stack();
+
+ if (regs)
+ show_regs(regs);
+ else
+ dump_stack();
}
/*
@@ -3820,7 +3846,7 @@
}
EXPORT_SYMBOL_GPL(__wake_up_sync); /* For internal use only */
-void fastcall complete(struct completion *x)
+void complete(struct completion *x)
{
unsigned long flags;
@@ -3832,7 +3858,7 @@
}
EXPORT_SYMBOL(complete);
-void fastcall complete_all(struct completion *x)
+void complete_all(struct completion *x)
{
unsigned long flags;
@@ -3884,13 +3910,13 @@
return timeout;
}
-void fastcall __sched wait_for_completion(struct completion *x)
+void __sched wait_for_completion(struct completion *x)
{
wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_UNINTERRUPTIBLE);
}
EXPORT_SYMBOL(wait_for_completion);
-unsigned long fastcall __sched
+unsigned long __sched
wait_for_completion_timeout(struct completion *x, unsigned long timeout)
{
return wait_for_common(x, timeout, TASK_UNINTERRUPTIBLE);
@@ -3906,7 +3932,7 @@
}
EXPORT_SYMBOL(wait_for_completion_interruptible);
-unsigned long fastcall __sched
+unsigned long __sched
wait_for_completion_interruptible_timeout(struct completion *x,
unsigned long timeout)
{
@@ -5339,7 +5365,7 @@
.procname = "sched_domain",
.mode = 0555,
},
- {0,},
+ {0, },
};
static struct ctl_table sd_ctl_root[] = {
@@ -5349,7 +5375,7 @@
.mode = 0555,
.child = sd_ctl_dir,
},
- {0,},
+ {0, },
};
static struct ctl_table *sd_alloc_ctl_entry(int n)
@@ -5461,11 +5487,12 @@
struct ctl_table *entry = sd_alloc_ctl_entry(cpu_num + 1);
char buf[32];
+ WARN_ON(sd_ctl_dir[0].child);
+ sd_ctl_dir[0].child = entry;
+
if (entry == NULL)
return;
- sd_ctl_dir[0].child = entry;
-
for_each_online_cpu(i) {
snprintf(buf, 32, "cpu%d", i);
entry->procname = kstrdup(buf, GFP_KERNEL);
@@ -5473,14 +5500,19 @@
entry->child = sd_alloc_ctl_cpu_table(i);
entry++;
}
+
+ WARN_ON(sd_sysctl_header);
sd_sysctl_header = register_sysctl_table(sd_ctl_root);
}
+/* may be called multiple times per register */
static void unregister_sched_domain_sysctl(void)
{
- unregister_sysctl_table(sd_sysctl_header);
+ if (sd_sysctl_header)
+ unregister_sysctl_table(sd_sysctl_header);
sd_sysctl_header = NULL;
- sd_free_ctl_entry(&sd_ctl_dir[0].child);
+ if (sd_ctl_dir[0].child)
+ sd_free_ctl_entry(&sd_ctl_dir[0].child);
}
#else
static void register_sched_domain_sysctl(void)
@@ -5611,6 +5643,82 @@
EXPORT_SYMBOL(nr_cpu_ids);
#ifdef CONFIG_SCHED_DEBUG
+
+static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level)
+{
+ struct sched_group *group = sd->groups;
+ cpumask_t groupmask;
+ char str[NR_CPUS];
+
+ cpumask_scnprintf(str, NR_CPUS, sd->span);
+ cpus_clear(groupmask);
+
+ printk(KERN_DEBUG "%*s domain %d: ", level, "", level);
+
+ if (!(sd->flags & SD_LOAD_BALANCE)) {
+ printk("does not load-balance\n");
+ if (sd->parent)
+ printk(KERN_ERR "ERROR: !SD_LOAD_BALANCE domain"
+ " has parent");
+ return -1;
+ }
+
+ printk(KERN_CONT "span %s\n", str);
+
+ if (!cpu_isset(cpu, sd->span)) {
+ printk(KERN_ERR "ERROR: domain->span does not contain "
+ "CPU%d\n", cpu);
+ }
+ if (!cpu_isset(cpu, group->cpumask)) {
+ printk(KERN_ERR "ERROR: domain->groups does not contain"
+ " CPU%d\n", cpu);
+ }
+
+ printk(KERN_DEBUG "%*s groups:", level + 1, "");
+ do {
+ if (!group) {
+ printk("\n");
+ printk(KERN_ERR "ERROR: group is NULL\n");
+ break;
+ }
+
+ if (!group->__cpu_power) {
+ printk(KERN_CONT "\n");
+ printk(KERN_ERR "ERROR: domain->cpu_power not "
+ "set\n");
+ break;
+ }
+
+ if (!cpus_weight(group->cpumask)) {
+ printk(KERN_CONT "\n");
+ printk(KERN_ERR "ERROR: empty group\n");
+ break;
+ }
+
+ if (cpus_intersects(groupmask, group->cpumask)) {
+ printk(KERN_CONT "\n");
+ printk(KERN_ERR "ERROR: repeated CPUs\n");
+ break;
+ }
+
+ cpus_or(groupmask, groupmask, group->cpumask);
+
+ cpumask_scnprintf(str, NR_CPUS, group->cpumask);
+ printk(KERN_CONT " %s", str);
+
+ group = group->next;
+ } while (group != sd->groups);
+ printk(KERN_CONT "\n");
+
+ if (!cpus_equal(sd->span, groupmask))
+ printk(KERN_ERR "ERROR: groups don't span domain->span\n");
+
+ if (sd->parent && !cpus_subset(groupmask, sd->parent->span))
+ printk(KERN_ERR "ERROR: parent span is not a superset "
+ "of domain->span\n");
+ return 0;
+}
+
static void sched_domain_debug(struct sched_domain *sd, int cpu)
{
int level = 0;
@@ -5622,90 +5730,14 @@
printk(KERN_DEBUG "CPU%d attaching sched-domain:\n", cpu);
- do {
- int i;
- char str[NR_CPUS];
- struct sched_group *group = sd->groups;
- cpumask_t groupmask;
-
- cpumask_scnprintf(str, NR_CPUS, sd->span);
- cpus_clear(groupmask);
-
- printk(KERN_DEBUG);
- for (i = 0; i < level + 1; i++)
- printk(" ");
- printk("domain %d: ", level);
-
- if (!(sd->flags & SD_LOAD_BALANCE)) {
- printk("does not load-balance\n");
- if (sd->parent)
- printk(KERN_ERR "ERROR: !SD_LOAD_BALANCE domain"
- " has parent");
+ for (;;) {
+ if (sched_domain_debug_one(sd, cpu, level))
break;
- }
-
- printk("span %s\n", str);
-
- if (!cpu_isset(cpu, sd->span))
- printk(KERN_ERR "ERROR: domain->span does not contain "
- "CPU%d\n", cpu);
- if (!cpu_isset(cpu, group->cpumask))
- printk(KERN_ERR "ERROR: domain->groups does not contain"
- " CPU%d\n", cpu);
-
- printk(KERN_DEBUG);
- for (i = 0; i < level + 2; i++)
- printk(" ");
- printk("groups:");
- do {
- if (!group) {
- printk("\n");
- printk(KERN_ERR "ERROR: group is NULL\n");
- break;
- }
-
- if (!group->__cpu_power) {
- printk(KERN_CONT "\n");
- printk(KERN_ERR "ERROR: domain->cpu_power not "
- "set\n");
- break;
- }
-
- if (!cpus_weight(group->cpumask)) {
- printk(KERN_CONT "\n");
- printk(KERN_ERR "ERROR: empty group\n");
- break;
- }
-
- if (cpus_intersects(groupmask, group->cpumask)) {
- printk(KERN_CONT "\n");
- printk(KERN_ERR "ERROR: repeated CPUs\n");
- break;
- }
-
- cpus_or(groupmask, groupmask, group->cpumask);
-
- cpumask_scnprintf(str, NR_CPUS, group->cpumask);
- printk(KERN_CONT " %s", str);
-
- group = group->next;
- } while (group != sd->groups);
- printk(KERN_CONT "\n");
-
- if (!cpus_equal(sd->span, groupmask))
- printk(KERN_ERR "ERROR: groups don't span "
- "domain->span\n");
-
level++;
sd = sd->parent;
if (!sd)
- continue;
-
- if (!cpus_subset(groupmask, sd->span))
- printk(KERN_ERR "ERROR: parent span is not a superset "
- "of domain->span\n");
-
- } while (sd);
+ break;
+ }
}
#else
# define sched_domain_debug(sd, cpu) do { } while (0)
@@ -6424,13 +6456,17 @@
*/
static int arch_init_sched_domains(const cpumask_t *cpu_map)
{
+ int err;
+
ndoms_cur = 1;
doms_cur = kmalloc(sizeof(cpumask_t), GFP_KERNEL);
if (!doms_cur)
doms_cur = &fallback_doms;
cpus_andnot(*doms_cur, *cpu_map, cpu_isolated_map);
+ err = build_sched_domains(doms_cur);
register_sched_domain_sysctl();
- return build_sched_domains(doms_cur);
+
+ return err;
}
static void arch_destroy_sched_domains(const cpumask_t *cpu_map)
@@ -6479,6 +6515,9 @@
{
int i, j;
+ /* always unregister in case we don't destroy any domains */
+ unregister_sched_domain_sysctl();
+
if (doms_new == NULL) {
ndoms_new = 1;
doms_new = &fallback_doms;
@@ -6514,6 +6553,8 @@
kfree(doms_cur);
doms_cur = doms_new;
ndoms_cur = ndoms_new;
+
+ register_sched_domain_sysctl();
}
#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
@@ -6978,8 +7019,8 @@
/* rcu callback to free various structures associated with a task group */
static void free_sched_group(struct rcu_head *rhp)
{
- struct cfs_rq *cfs_rq = container_of(rhp, struct cfs_rq, rcu);
- struct task_group *tg = cfs_rq->tg;
+ struct task_group *tg = container_of(rhp, struct task_group, rcu);
+ struct cfs_rq *cfs_rq;
struct sched_entity *se;
int i;
@@ -7000,7 +7041,7 @@
/* Destroy runqueue etc associated with a task group */
void sched_destroy_group(struct task_group *tg)
{
- struct cfs_rq *cfs_rq;
+ struct cfs_rq *cfs_rq = NULL;
int i;
for_each_possible_cpu(i) {
@@ -7008,10 +7049,10 @@
list_del_rcu(&cfs_rq->leaf_cfs_rq_list);
}
- cfs_rq = tg->cfs_rq[0];
+ BUG_ON(!cfs_rq);
/* wait for possible concurrent references to cfs_rqs complete */
- call_rcu(&cfs_rq->rcu, free_sched_group);
+ call_rcu(&tg->rcu, free_sched_group);
}
/* change task's runqueue when it moves between groups.
@@ -7101,25 +7142,25 @@
#ifdef CONFIG_FAIR_CGROUP_SCHED
/* return corresponding task_group object of a cgroup */
-static inline struct task_group *cgroup_tg(struct cgroup *cont)
+static inline struct task_group *cgroup_tg(struct cgroup *cgrp)
{
- return container_of(cgroup_subsys_state(cont, cpu_cgroup_subsys_id),
- struct task_group, css);
+ return container_of(cgroup_subsys_state(cgrp, cpu_cgroup_subsys_id),
+ struct task_group, css);
}
static struct cgroup_subsys_state *
-cpu_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
+cpu_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cgrp)
{
struct task_group *tg;
- if (!cont->parent) {
+ if (!cgrp->parent) {
/* This is early initialization for the top cgroup */
- init_task_group.css.cgroup = cont;
+ init_task_group.css.cgroup = cgrp;
return &init_task_group.css;
}
/* we support only 1-level deep hierarchical scheduler atm */
- if (cont->parent->parent)
+ if (cgrp->parent->parent)
return ERR_PTR(-EINVAL);
tg = sched_create_group();
@@ -7127,21 +7168,21 @@
return ERR_PTR(-ENOMEM);
/* Bind the cgroup to task_group object we just created */
- tg->css.cgroup = cont;
+ tg->css.cgroup = cgrp;
return &tg->css;
}
static void cpu_cgroup_destroy(struct cgroup_subsys *ss,
- struct cgroup *cont)
+ struct cgroup *cgrp)
{
- struct task_group *tg = cgroup_tg(cont);
+ struct task_group *tg = cgroup_tg(cgrp);
sched_destroy_group(tg);
}
static int cpu_cgroup_can_attach(struct cgroup_subsys *ss,
- struct cgroup *cont, struct task_struct *tsk)
+ struct cgroup *cgrp, struct task_struct *tsk)
{
/* We don't support RT-tasks being in separate groups */
if (tsk->sched_class != &fair_sched_class)
@@ -7151,61 +7192,72 @@
}
static void
-cpu_cgroup_attach(struct cgroup_subsys *ss, struct cgroup *cont,
+cpu_cgroup_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
struct cgroup *old_cont, struct task_struct *tsk)
{
sched_move_task(tsk);
}
-static ssize_t cpu_shares_write(struct cgroup *cont, struct cftype *cftype,
- struct file *file, const char __user *userbuf,
- size_t nbytes, loff_t *ppos)
+static int cpu_shares_write_uint(struct cgroup *cgrp, struct cftype *cftype,
+ u64 shareval)
{
- unsigned long shareval;
- struct task_group *tg = cgroup_tg(cont);
- char buffer[2*sizeof(unsigned long) + 1];
- int rc;
-
- if (nbytes > 2*sizeof(unsigned long)) /* safety check */
- return -E2BIG;
-
- if (copy_from_user(buffer, userbuf, nbytes))
- return -EFAULT;
-
- buffer[nbytes] = 0; /* nul-terminate */
- shareval = simple_strtoul(buffer, NULL, 10);
-
- rc = sched_group_set_shares(tg, shareval);
-
- return (rc < 0 ? rc : nbytes);
+ return sched_group_set_shares(cgroup_tg(cgrp), shareval);
}
-static u64 cpu_shares_read_uint(struct cgroup *cont, struct cftype *cft)
+static u64 cpu_shares_read_uint(struct cgroup *cgrp, struct cftype *cft)
{
- struct task_group *tg = cgroup_tg(cont);
+ struct task_group *tg = cgroup_tg(cgrp);
return (u64) tg->shares;
}
-static struct cftype cpu_shares = {
- .name = "shares",
- .read_uint = cpu_shares_read_uint,
- .write = cpu_shares_write,
+static u64 cpu_usage_read(struct cgroup *cgrp, struct cftype *cft)
+{
+ struct task_group *tg = cgroup_tg(cgrp);
+ unsigned long flags;
+ u64 res = 0;
+ int i;
+
+ for_each_possible_cpu(i) {
+ /*
+ * Lock to prevent races with updating 64-bit counters
+ * on 32-bit arches.
+ */
+ spin_lock_irqsave(&cpu_rq(i)->lock, flags);
+ res += tg->se[i]->sum_exec_runtime;
+ spin_unlock_irqrestore(&cpu_rq(i)->lock, flags);
+ }
+ /* Convert from ns to ms */
+ do_div(res, 1000000);
+
+ return res;
+}
+
+static struct cftype cpu_files[] = {
+ {
+ .name = "shares",
+ .read_uint = cpu_shares_read_uint,
+ .write_uint = cpu_shares_write_uint,
+ },
+ {
+ .name = "usage",
+ .read_uint = cpu_usage_read,
+ },
};
static int cpu_cgroup_populate(struct cgroup_subsys *ss, struct cgroup *cont)
{
- return cgroup_add_file(cont, ss, &cpu_shares);
+ return cgroup_add_files(cont, ss, cpu_files, ARRAY_SIZE(cpu_files));
}
struct cgroup_subsys cpu_cgroup_subsys = {
- .name = "cpu",
- .create = cpu_cgroup_create,
- .destroy = cpu_cgroup_destroy,
- .can_attach = cpu_cgroup_can_attach,
- .attach = cpu_cgroup_attach,
- .populate = cpu_cgroup_populate,
- .subsys_id = cpu_cgroup_subsys_id,
+ .name = "cpu",
+ .create = cpu_cgroup_create,
+ .destroy = cpu_cgroup_destroy,
+ .can_attach = cpu_cgroup_can_attach,
+ .attach = cpu_cgroup_attach,
+ .populate = cpu_cgroup_populate,
+ .subsys_id = cpu_cgroup_subsys_id,
.early_init = 1,
};
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 166ed6d..01859f6 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -876,6 +876,7 @@
}
}
+#ifdef CONFIG_SMP
/**************************************************
* Fair scheduling class load-balancing methods:
*/
@@ -936,12 +937,11 @@
static unsigned long
load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_nr_move, unsigned long max_load_move,
+ unsigned long max_load_move,
struct sched_domain *sd, enum cpu_idle_type idle,
int *all_pinned, int *this_best_prio)
{
struct cfs_rq *busy_cfs_rq;
- unsigned long load_moved, total_nr_moved = 0, nr_moved;
long rem_load_move = max_load_move;
struct rq_iterator cfs_rq_iterator;
@@ -969,25 +969,48 @@
#else
# define maxload rem_load_move
#endif
- /* pass busy_cfs_rq argument into
+ /*
+ * pass busy_cfs_rq argument into
* load_balance_[start|next]_fair iterators
*/
cfs_rq_iterator.arg = busy_cfs_rq;
- nr_moved = balance_tasks(this_rq, this_cpu, busiest,
- max_nr_move, maxload, sd, idle, all_pinned,
- &load_moved, this_best_prio, &cfs_rq_iterator);
+ rem_load_move -= balance_tasks(this_rq, this_cpu, busiest,
+ maxload, sd, idle, all_pinned,
+ this_best_prio,
+ &cfs_rq_iterator);
- total_nr_moved += nr_moved;
- max_nr_move -= nr_moved;
- rem_load_move -= load_moved;
-
- if (max_nr_move <= 0 || rem_load_move <= 0)
+ if (rem_load_move <= 0)
break;
}
return max_load_move - rem_load_move;
}
+static int
+move_one_task_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
+ struct sched_domain *sd, enum cpu_idle_type idle)
+{
+ struct cfs_rq *busy_cfs_rq;
+ struct rq_iterator cfs_rq_iterator;
+
+ cfs_rq_iterator.start = load_balance_start_fair;
+ cfs_rq_iterator.next = load_balance_next_fair;
+
+ for_each_leaf_cfs_rq(busiest, busy_cfs_rq) {
+ /*
+ * pass busy_cfs_rq argument into
+ * load_balance_[start|next]_fair iterators
+ */
+ cfs_rq_iterator.arg = busy_cfs_rq;
+ if (iter_move_one_task(this_rq, this_cpu, busiest, sd, idle,
+ &cfs_rq_iterator))
+ return 1;
+ }
+
+ return 0;
+}
+#endif
+
/*
* scheduler tick hitting a task of our scheduling class:
*/
@@ -1002,7 +1025,7 @@
}
}
-#define swap(a,b) do { typeof(a) tmp = (a); (a) = (b); (b) = tmp; } while (0)
+#define swap(a, b) do { typeof(a) tmp = (a); (a) = (b); (b) = tmp; } while (0)
/*
* Share the fairness runtime between parent and child, thus the
@@ -1063,7 +1086,10 @@
.pick_next_task = pick_next_task_fair,
.put_prev_task = put_prev_task_fair,
+#ifdef CONFIG_SMP
.load_balance = load_balance_fair,
+ .move_one_task = move_one_task_fair,
+#endif
.set_curr_task = set_curr_task_fair,
.task_tick = task_tick_fair,
diff --git a/kernel/sched_idletask.c b/kernel/sched_idletask.c
index 6e2ead4..bf9c25c 100644
--- a/kernel/sched_idletask.c
+++ b/kernel/sched_idletask.c
@@ -37,15 +37,24 @@
{
}
+#ifdef CONFIG_SMP
static unsigned long
load_balance_idle(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_nr_move, unsigned long max_load_move,
- struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned, int *this_best_prio)
+ unsigned long max_load_move,
+ struct sched_domain *sd, enum cpu_idle_type idle,
+ int *all_pinned, int *this_best_prio)
{
return 0;
}
+static int
+move_one_task_idle(struct rq *this_rq, int this_cpu, struct rq *busiest,
+ struct sched_domain *sd, enum cpu_idle_type idle)
+{
+ return 0;
+}
+#endif
+
static void task_tick_idle(struct rq *rq, struct task_struct *curr)
{
}
@@ -69,7 +78,10 @@
.pick_next_task = pick_next_task_idle,
.put_prev_task = put_prev_task_idle,
+#ifdef CONFIG_SMP
.load_balance = load_balance_idle,
+ .move_one_task = move_one_task_idle,
+#endif
.set_curr_task = set_curr_task_idle,
.task_tick = task_tick_idle,
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index d0097a0..8abd752a 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -98,6 +98,7 @@
p->se.exec_start = 0;
}
+#ifdef CONFIG_SMP
/*
* Load-balancing iterator. Note: while the runqueue stays locked
* during the whole iteration, the current task might be
@@ -172,13 +173,11 @@
static unsigned long
load_balance_rt(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_nr_move, unsigned long max_load_move,
- struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned, int *this_best_prio)
+ unsigned long max_load_move,
+ struct sched_domain *sd, enum cpu_idle_type idle,
+ int *all_pinned, int *this_best_prio)
{
- int nr_moved;
struct rq_iterator rt_rq_iterator;
- unsigned long load_moved;
rt_rq_iterator.start = load_balance_start_rt;
rt_rq_iterator.next = load_balance_next_rt;
@@ -187,13 +186,25 @@
*/
rt_rq_iterator.arg = busiest;
- nr_moved = balance_tasks(this_rq, this_cpu, busiest, max_nr_move,
- max_load_move, sd, idle, all_pinned, &load_moved,
- this_best_prio, &rt_rq_iterator);
-
- return load_moved;
+ return balance_tasks(this_rq, this_cpu, busiest, max_load_move, sd,
+ idle, all_pinned, this_best_prio, &rt_rq_iterator);
}
+static int
+move_one_task_rt(struct rq *this_rq, int this_cpu, struct rq *busiest,
+ struct sched_domain *sd, enum cpu_idle_type idle)
+{
+ struct rq_iterator rt_rq_iterator;
+
+ rt_rq_iterator.start = load_balance_start_rt;
+ rt_rq_iterator.next = load_balance_next_rt;
+ rt_rq_iterator.arg = busiest;
+
+ return iter_move_one_task(this_rq, this_cpu, busiest, sd, idle,
+ &rt_rq_iterator);
+}
+#endif
+
static void task_tick_rt(struct rq *rq, struct task_struct *p)
{
/*
@@ -236,7 +247,10 @@
.pick_next_task = pick_next_task_rt,
.put_prev_task = put_prev_task_rt,
+#ifdef CONFIG_SMP
.load_balance = load_balance_rt,
+ .move_one_task = move_one_task_rt,
+#endif
.set_curr_task = set_curr_task_rt,
.task_tick = task_tick_rt,
diff --git a/kernel/signal.c b/kernel/signal.c
index 1200630..909a0cc 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -124,7 +124,7 @@
void recalc_sigpending(void)
{
- if (!recalc_sigpending_tsk(current))
+ if (!recalc_sigpending_tsk(current) && !freezing(current))
clear_thread_flag(TIF_SIGPENDING);
}
@@ -732,7 +732,7 @@
printk("%s/%d: potentially unexpected fatal signal %d.\n",
current->comm, task_pid_nr(current), signr);
-#ifdef __i386__
+#if defined(__i386__) && !defined(__arch_um__)
printk("code at %08lx: ", regs->eip);
{
int i;
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 52c7a15..56cb009 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -40,10 +40,14 @@
cond_syscall(sys_recv);
cond_syscall(sys_socket);
cond_syscall(sys_setsockopt);
+cond_syscall(compat_sys_setsockopt);
cond_syscall(sys_getsockopt);
+cond_syscall(compat_sys_getsockopt);
cond_syscall(sys_shutdown);
cond_syscall(sys_sendmsg);
+cond_syscall(compat_sys_sendmsg);
cond_syscall(sys_recvmsg);
+cond_syscall(compat_sys_recvmsg);
cond_syscall(sys_socketcall);
cond_syscall(sys_futex);
cond_syscall(compat_sys_futex);
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 10a1347..5997456 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -320,8 +320,6 @@
return ts->sleep_length;
}
-EXPORT_SYMBOL_GPL(tick_nohz_get_sleep_length);
-
/**
* nohz_restart_sched_tick - restart the idle tick from the idle task
*
diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c
index fdb2e03..12c5f4c 100644
--- a/kernel/time/timer_list.c
+++ b/kernel/time/timer_list.c
@@ -129,7 +129,8 @@
struct hrtimer_cpu_base *cpu_base = &per_cpu(hrtimer_bases, cpu);
int i;
- SEQ_printf(m, "\ncpu: %d\n", cpu);
+ SEQ_printf(m, "\n");
+ SEQ_printf(m, "cpu: %d\n", cpu);
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
SEQ_printf(m, " clock %d:\n", i);
print_base(m, cpu_base->clock_base + i, now);
@@ -184,7 +185,8 @@
{
struct clock_event_device *dev = td->evtdev;
- SEQ_printf(m, "\nTick Device: mode: %d\n", td->mode);
+ SEQ_printf(m, "\n");
+ SEQ_printf(m, "Tick Device: mode: %d\n", td->mode);
SEQ_printf(m, "Clock Event Device: ");
if (!dev) {
diff --git a/kernel/user.c b/kernel/user.c
index e91331c..0f3aa02 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -129,7 +129,7 @@
}
/* return cpu shares held by the user */
-ssize_t cpu_shares_show(struct kset *kset, char *buffer)
+static ssize_t cpu_shares_show(struct kset *kset, char *buffer)
{
struct user_struct *up = container_of(kset, struct user_struct, kset);
@@ -137,7 +137,8 @@
}
/* modify cpu shares held by the user */
-ssize_t cpu_shares_store(struct kset *kset, const char *buffer, size_t size)
+static ssize_t cpu_shares_store(struct kset *kset, const char *buffer,
+ size_t size)
{
struct user_struct *up = container_of(kset, struct user_struct, kset);
unsigned long shares;
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 1faa508..1e5f207 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -9,6 +9,14 @@
operations. This is useful for identifying long delays
in kernel startup.
+config ENABLE_WARN_DEPRECATED
+ bool "Enable __deprecated logic"
+ default y
+ help
+ Enable the __deprecated logic in the kernel build.
+ Disable this to suppress the "warning: 'foo' is deprecated
+ (declared at kernel/power/somefile.c:1234)" messages.
+
config ENABLE_MUST_CHECK
bool "Enable __must_check logic"
default y
diff --git a/lib/kobject.c b/lib/kobject.c
index 03d4036..a7e3bf4 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -308,6 +308,19 @@
if (!kobj->parent)
return -EINVAL;
+ /* see if this name is already in use */
+ if (kobj->kset) {
+ struct kobject *temp_kobj;
+ temp_kobj = kset_find_obj(kobj->kset, new_name);
+ if (temp_kobj) {
+ printk(KERN_WARNING "kobject '%s' can not be renamed "
+ "to '%s' as '%s' is already in existance.\n",
+ kobject_name(kobj), new_name, new_name);
+ kobject_put(temp_kobj);
+ return -EINVAL;
+ }
+ }
+
devpath = kobject_get_path(kobj, GFP_KERNEL);
if (!devpath) {
error = -ENOMEM;
diff --git a/mm/filemap.c b/mm/filemap.c
index 5209e47..188cf5f 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -28,6 +28,7 @@
#include <linux/backing-dev.h>
#include <linux/pagevec.h>
#include <linux/blkdev.h>
+#include <linux/backing-dev.h>
#include <linux/security.h>
#include <linux/syscalls.h>
#include <linux/cpuset.h>
@@ -1299,7 +1300,7 @@
size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
if (vmf->pgoff >= size)
- goto outside_data_content;
+ return VM_FAULT_SIGBUS;
/* If we don't want any read-ahead, don't bother */
if (VM_RandomReadHint(vma))
@@ -1376,7 +1377,7 @@
if (unlikely(vmf->pgoff >= size)) {
unlock_page(page);
page_cache_release(page);
- goto outside_data_content;
+ return VM_FAULT_SIGBUS;
}
/*
@@ -1387,15 +1388,6 @@
vmf->page = page;
return ret | VM_FAULT_LOCKED;
-outside_data_content:
- /*
- * An external ptracer can access pages that normally aren't
- * accessible..
- */
- if (vma->vm_mm == current->mm)
- return VM_FAULT_SIGBUS;
-
- /* Fall through to the non-read-ahead case */
no_cached_page:
/*
* We're only likely to ever get here if MADV_RANDOM is in
@@ -2510,21 +2502,17 @@
}
retval = mapping->a_ops->direct_IO(rw, iocb, iov, offset, nr_segs);
- if (retval)
- goto out;
/*
* Finally, try again to invalidate clean pages which might have been
- * faulted in by get_user_pages() if the source of the write was an
- * mmap()ed region of the file we're writing. That's a pretty crazy
- * thing to do, so we don't support it 100%. If this invalidation
- * fails and we have -EIOCBQUEUED we ignore the failure.
+ * cached by non-direct readahead, or faulted in by get_user_pages()
+ * if the source of the write was an mmap'ed region of the file
+ * we're writing. Either one is a pretty crazy thing to do,
+ * so we don't support it 100%. If this invalidation
+ * fails, tough, the write still worked...
*/
if (rw == WRITE && mapping->nrpages) {
- int err = invalidate_inode_pages2_range(mapping,
- offset >> PAGE_CACHE_SHIFT, end);
- if (err && retval >= 0)
- retval = err;
+ invalidate_inode_pages2_range(mapping, offset >> PAGE_CACHE_SHIFT, end);
}
out:
return retval;
diff --git a/mm/nommu.c b/mm/nommu.c
index 8f09333..35622c5 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -12,6 +12,7 @@
* Copyright (c) 2002 Greg Ungerer <gerg@snapgear.com>
*/
+#include <linux/module.h>
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/swap.h>
diff --git a/mm/shmem.c b/mm/shmem.c
index 404e53b..253d20591 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -915,6 +915,21 @@
struct inode *inode;
BUG_ON(!PageLocked(page));
+ /*
+ * shmem_backing_dev_info's capabilities prevent regular writeback or
+ * sync from ever calling shmem_writepage; but a stacking filesystem
+ * may use the ->writepage of its underlying filesystem, in which case
+ * we want to do nothing when that underlying filesystem is tmpfs
+ * (writing out to swap is useful as a response to memory pressure, but
+ * of no use to stabilize the data) - just redirty the page, unlock it
+ * and claim success in this case. AOP_WRITEPAGE_ACTIVATE, and the
+ * page_mapped check below, must be avoided unless we're in reclaim.
+ */
+ if (!wbc->for_reclaim) {
+ set_page_dirty(page);
+ unlock_page(page);
+ return 0;
+ }
BUG_ON(page_mapped(page));
mapping = page->mapping;
diff --git a/mm/slub.c b/mm/slub.c
index aac1dd3..bcdb2c89 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2734,7 +2734,7 @@
* and offline_pages() function shoudn't call this
* callback. So, we must fail.
*/
- BUG_ON(atomic_read(&n->nr_slabs));
+ BUG_ON(atomic_long_read(&n->nr_slabs));
s->node[offline_node] = NULL;
kmem_cache_free(kmalloc_caches, n);
diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c
index d3b718b..22620f6 100644
--- a/mm/sparse-vmemmap.c
+++ b/mm/sparse-vmemmap.c
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/vmalloc.h>
+#include <linux/sched.h>
#include <asm/dma.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
diff --git a/mm/sparse.c b/mm/sparse.c
index 08fb14f..e06f514 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -220,12 +220,6 @@
return 1;
}
-__attribute__((weak)) __init
-void *alloc_bootmem_high_node(pg_data_t *pgdat, unsigned long size)
-{
- return NULL;
-}
-
static unsigned long usemap_size(void)
{
unsigned long size_bytes;
@@ -267,11 +261,6 @@
if (map)
return map;
- map = alloc_bootmem_high_node(NODE_DATA(nid),
- sizeof(struct page) * PAGES_PER_SECTION);
- if (map)
- return map;
-
map = alloc_bootmem_node(NODE_DATA(nid),
sizeof(struct page) * PAGES_PER_SECTION);
return map;
diff --git a/net/9p/mux.c b/net/9p/mux.c
index f140147..c9f0805 100644
--- a/net/9p/mux.c
+++ b/net/9p/mux.c
@@ -222,8 +222,10 @@
}
if (i >= ARRAY_SIZE(p9_mux_poll_tasks)) {
- if (vptlast == NULL)
+ if (vptlast == NULL) {
+ mutex_unlock(&p9_mux_task_lock);
return -ENOMEM;
+ }
P9_DPRINTK(P9_DEBUG_MUX, "put in proc %d\n", i);
list_add(&m->mux_list, &vptlast->mux_list);
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 7c0b515..e0d37d6d 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -1044,7 +1044,7 @@
if (sock->type != SOCK_RAW && sock->type != SOCK_DGRAM)
goto out;
rc = -ENOMEM;
- sk = sk_alloc(net, PF_APPLETALK, GFP_KERNEL, &ddp_proto, 1);
+ sk = sk_alloc(net, PF_APPLETALK, GFP_KERNEL, &ddp_proto);
if (!sk)
goto out;
rc = 0;
diff --git a/net/atm/common.c b/net/atm/common.c
index e166d9e..eba09a0 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -133,7 +133,7 @@
sock->sk = NULL;
if (sock->type == SOCK_STREAM)
return -EINVAL;
- sk = sk_alloc(net, family, GFP_KERNEL, &vcc_proto, 1);
+ sk = sk_alloc(net, family, GFP_KERNEL, &vcc_proto);
if (!sk)
return -ENOMEM;
sock_init_data(sock, sk);
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 993e5c7..8378afd 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -836,7 +836,8 @@
return -ESOCKTNOSUPPORT;
}
- if ((sk = sk_alloc(net, PF_AX25, GFP_ATOMIC, &ax25_proto, 1)) == NULL)
+ sk = sk_alloc(net, PF_AX25, GFP_ATOMIC, &ax25_proto);
+ if (sk == NULL)
return -ENOMEM;
ax25 = sk->sk_protinfo = ax25_create_cb();
@@ -861,7 +862,8 @@
struct sock *sk;
ax25_cb *ax25, *oax25;
- if ((sk = sk_alloc(osk->sk_net, PF_AX25, GFP_ATOMIC, osk->sk_prot, 1)) == NULL)
+ sk = sk_alloc(osk->sk_net, PF_AX25, GFP_ATOMIC, osk->sk_prot);
+ if (sk == NULL)
return NULL;
if ((ax25 = ax25_create_cb()) == NULL) {
diff --git a/net/bluetooth/bnep/sock.c b/net/bluetooth/bnep/sock.c
index f718965..9ebd3c6 100644
--- a/net/bluetooth/bnep/sock.c
+++ b/net/bluetooth/bnep/sock.c
@@ -213,7 +213,7 @@
if (sock->type != SOCK_RAW)
return -ESOCKTNOSUPPORT;
- sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &bnep_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &bnep_proto);
if (!sk)
return -ENOMEM;
diff --git a/net/bluetooth/cmtp/sock.c b/net/bluetooth/cmtp/sock.c
index cf700c2..783edab 100644
--- a/net/bluetooth/cmtp/sock.c
+++ b/net/bluetooth/cmtp/sock.c
@@ -204,7 +204,7 @@
if (sock->type != SOCK_RAW)
return -ESOCKTNOSUPPORT;
- sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &cmtp_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &cmtp_proto);
if (!sk)
return -ENOMEM;
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 8825102..1499132 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -645,7 +645,7 @@
sock->ops = &hci_sock_ops;
- sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &hci_sk_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &hci_sk_proto);
if (!sk)
return -ENOMEM;
diff --git a/net/bluetooth/hidp/sock.c b/net/bluetooth/hidp/sock.c
index 1de2b6f..3292b95 100644
--- a/net/bluetooth/hidp/sock.c
+++ b/net/bluetooth/hidp/sock.c
@@ -255,7 +255,7 @@
if (sock->type != SOCK_RAW)
return -ESOCKTNOSUPPORT;
- sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &hidp_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, GFP_ATOMIC, &hidp_proto);
if (!sk)
return -ENOMEM;
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 6fbbae7..477e052 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -607,7 +607,7 @@
{
struct sock *sk;
- sk = sk_alloc(net, PF_BLUETOOTH, prio, &l2cap_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, prio, &l2cap_proto);
if (!sk)
return NULL;
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 266b697..c46d510 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -287,7 +287,7 @@
struct rfcomm_dlc *d;
struct sock *sk;
- sk = sk_alloc(net, PF_BLUETOOTH, prio, &rfcomm_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, prio, &rfcomm_proto);
if (!sk)
return NULL;
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 82d0dfdf..93ad1aa 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -421,7 +421,7 @@
{
struct sock *sk;
- sk = sk_alloc(net, PF_BLUETOOTH, prio, &sco_proto, 1);
+ sk = sk_alloc(net, PF_BLUETOOTH, prio, &sco_proto);
if (!sk)
return NULL;
diff --git a/net/core/dev.c b/net/core/dev.c
index 8726589..be6ceda 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -120,6 +120,8 @@
#include <linux/ctype.h>
#include <linux/if_arp.h>
+#include "net-sysfs.h"
+
/*
* The list of packet types we will receive (as opposed to discard)
* and the routines to invoke.
@@ -249,10 +251,6 @@
DEFINE_PER_CPU(struct softnet_data, softnet_data);
-extern int netdev_kobject_init(void);
-extern int netdev_register_kobject(struct net_device *);
-extern void netdev_unregister_kobject(struct net_device *);
-
#ifdef CONFIG_DEBUG_LOCK_ALLOC
/*
* register_netdevice() inits dev->_xmit_lock and sets lockdep class
@@ -885,6 +883,9 @@
if (!dev_valid_name(newname))
return -EINVAL;
+ if (strncmp(newname, dev->name, IFNAMSIZ) == 0)
+ return 0;
+
memcpy(oldname, dev->name, IFNAMSIZ);
if (strchr(newname, '%')) {
@@ -1007,17 +1008,20 @@
* Call device private open method
*/
set_bit(__LINK_STATE_START, &dev->state);
- if (dev->open) {
+
+ if (dev->validate_addr)
+ ret = dev->validate_addr(dev);
+
+ if (!ret && dev->open)
ret = dev->open(dev);
- if (ret)
- clear_bit(__LINK_STATE_START, &dev->state);
- }
/*
* If it went open OK then:
*/
- if (!ret) {
+ if (ret)
+ clear_bit(__LINK_STATE_START, &dev->state);
+ else {
/*
* Set the flags.
*/
@@ -1038,6 +1042,7 @@
*/
call_netdevice_notifiers(NETDEV_UP, dev);
}
+
return ret;
}
@@ -1746,9 +1751,6 @@
*
* return values:
* NET_RX_SUCCESS (no congestion)
- * NET_RX_CN_LOW (low congestion)
- * NET_RX_CN_MOD (moderate congestion)
- * NET_RX_CN_HIGH (high congestion)
* NET_RX_DROP (packet was dropped)
*
*/
@@ -1996,6 +1998,21 @@
}
#endif
+/**
+ * netif_receive_skb - process receive buffer from network
+ * @skb: buffer to process
+ *
+ * netif_receive_skb() is the main receive data processing function.
+ * It always succeeds. The buffer may be dropped during processing
+ * for congestion control or by the protocol layers.
+ *
+ * This function may only be called from softirq context and interrupts
+ * should be enabled.
+ *
+ * Return values (usually ignored):
+ * NET_RX_SUCCESS: no congestion
+ * NET_RX_DROP: packet was dropped
+ */
int netif_receive_skb(struct sk_buff *skb)
{
struct packet_type *ptype, *pt_prev;
@@ -2167,7 +2184,15 @@
weight = n->weight;
- work = n->poll(n, weight);
+ /* This NAPI_STATE_SCHED test is for avoiding a race
+ * with netpoll's poll_napi(). Only the entity which
+ * obtains the lock and sees NAPI_STATE_SCHED set will
+ * actually make the ->poll() call. Therefore we avoid
+ * accidently calling ->poll() when NAPI is not scheduled.
+ */
+ work = 0;
+ if (test_bit(NAPI_STATE_SCHED, &n->state))
+ work = n->poll(n, weight);
WARN_ON_ONCE(work > weight);
@@ -2663,7 +2688,7 @@
proc_net_remove(net, "dev");
}
-static struct pernet_operations __net_initdata dev_proc_ops = {
+static struct pernet_operations dev_proc_ops = {
.init = dev_proc_net_init,
.exit = dev_proc_net_exit,
};
@@ -3483,6 +3508,60 @@
spin_unlock(&net_todo_list_lock);
}
+static void rollback_registered(struct net_device *dev)
+{
+ BUG_ON(dev_boot_phase);
+ ASSERT_RTNL();
+
+ /* Some devices call without registering for initialization unwind. */
+ if (dev->reg_state == NETREG_UNINITIALIZED) {
+ printk(KERN_DEBUG "unregister_netdevice: device %s/%p never "
+ "was registered\n", dev->name, dev);
+
+ WARN_ON(1);
+ return;
+ }
+
+ BUG_ON(dev->reg_state != NETREG_REGISTERED);
+
+ /* If device is running, close it first. */
+ dev_close(dev);
+
+ /* And unlink it from device chain. */
+ unlist_netdevice(dev);
+
+ dev->reg_state = NETREG_UNREGISTERING;
+
+ synchronize_net();
+
+ /* Shutdown queueing discipline. */
+ dev_shutdown(dev);
+
+
+ /* Notify protocols, that we are about to destroy
+ this device. They should clean all the things.
+ */
+ call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
+
+ /*
+ * Flush the unicast and multicast chains
+ */
+ dev_addr_discard(dev);
+
+ if (dev->uninit)
+ dev->uninit(dev);
+
+ /* Notifier chain MUST detach us from master device. */
+ BUG_TRAP(!dev->master);
+
+ /* Remove entries from kobject tree */
+ netdev_unregister_kobject(dev);
+
+ synchronize_net();
+
+ dev_put(dev);
+}
+
/**
* register_netdevice - register a network device
* @dev: device to register
@@ -3620,8 +3699,10 @@
/* Notify protocols, that a new device appeared. */
ret = call_netdevice_notifiers(NETDEV_REGISTER, dev);
ret = notifier_to_errno(ret);
- if (ret)
- unregister_netdevice(dev);
+ if (ret) {
+ rollback_registered(dev);
+ dev->reg_state = NETREG_UNREGISTERED;
+ }
out:
return ret;
@@ -3898,59 +3979,9 @@
void unregister_netdevice(struct net_device *dev)
{
- BUG_ON(dev_boot_phase);
- ASSERT_RTNL();
-
- /* Some devices call without registering for initialization unwind. */
- if (dev->reg_state == NETREG_UNINITIALIZED) {
- printk(KERN_DEBUG "unregister_netdevice: device %s/%p never "
- "was registered\n", dev->name, dev);
-
- WARN_ON(1);
- return;
- }
-
- BUG_ON(dev->reg_state != NETREG_REGISTERED);
-
- /* If device is running, close it first. */
- dev_close(dev);
-
- /* And unlink it from device chain. */
- unlist_netdevice(dev);
-
- dev->reg_state = NETREG_UNREGISTERING;
-
- synchronize_net();
-
- /* Shutdown queueing discipline. */
- dev_shutdown(dev);
-
-
- /* Notify protocols, that we are about to destroy
- this device. They should clean all the things.
- */
- call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
-
- /*
- * Flush the unicast and multicast chains
- */
- dev_addr_discard(dev);
-
- if (dev->uninit)
- dev->uninit(dev);
-
- /* Notifier chain MUST detach us from master device. */
- BUG_TRAP(!dev->master);
-
- /* Remove entries from kobject tree */
- netdev_unregister_kobject(dev);
-
+ rollback_registered(dev);
/* Finish processing unregister after unlock */
net_set_todo(dev);
-
- synchronize_net();
-
- dev_put(dev);
}
/**
@@ -4323,7 +4354,7 @@
kfree(net->dev_index_head);
}
-static struct pernet_operations __net_initdata netdev_net_ops = {
+static struct pernet_operations netdev_net_ops = {
.init = netdev_init,
.exit = netdev_exit,
};
@@ -4354,7 +4385,7 @@
rtnl_unlock();
}
-static struct pernet_operations __net_initdata default_device_ops = {
+static struct pernet_operations default_device_ops = {
.exit = default_device_exit,
};
diff --git a/net/core/dev_mcast.c b/net/core/dev_mcast.c
index 15241cf..ae35405 100644
--- a/net/core/dev_mcast.c
+++ b/net/core/dev_mcast.c
@@ -285,7 +285,7 @@
proc_net_remove(net, "dev_mcast");
}
-static struct pernet_operations __net_initdata dev_mc_net_ops = {
+static struct pernet_operations dev_mc_net_ops = {
.init = dev_mc_net_init,
.exit = dev_mc_net_exit,
};
diff --git a/net/core/flow.c b/net/core/flow.c
index 0ab5234..3ed2b4b 100644
--- a/net/core/flow.c
+++ b/net/core/flow.c
@@ -142,8 +142,6 @@
typedef u32 flow_compare_t;
#endif
-extern void flowi_is_missized(void);
-
/* I hear what you're saying, use memcmp. But memcmp cannot make
* important assumptions that we can here, such as alignment and
* constant size.
@@ -153,8 +151,7 @@
flow_compare_t *k1, *k1_lim, *k2;
const int n_elem = sizeof(struct flowi) / sizeof(flow_compare_t);
- if (sizeof(struct flowi) % sizeof(flow_compare_t))
- flowi_is_missized();
+ BUILD_BUG_ON(sizeof(struct flowi) % sizeof(flow_compare_t));
k1 = (flow_compare_t *) key1;
k1_lim = k1 + n_elem;
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 6628e45..61ead1d 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -18,6 +18,8 @@
#include <linux/wireless.h>
#include <net/iw_handler.h>
+#include "net-sysfs.h"
+
#ifdef CONFIG_SYSFS
static const char fmt_hex[] = "%#x\n";
static const char fmt_long_hex[] = "%#lx\n";
diff --git a/net/core/net-sysfs.h b/net/core/net-sysfs.h
new file mode 100644
index 0000000..f5f108d
--- /dev/null
+++ b/net/core/net-sysfs.h
@@ -0,0 +1,8 @@
+#ifndef __NET_SYSFS_H__
+#define __NET_SYSFS_H__
+
+int netdev_kobject_init(void);
+int netdev_register_kobject(struct net_device *);
+void netdev_unregister_kobject(struct net_device *);
+
+#endif
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 6f71db8..e9f0964 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -17,16 +17,89 @@
LIST_HEAD(net_namespace_list);
-static struct kmem_cache *net_cachep;
-
struct net init_net;
EXPORT_SYMBOL_GPL(init_net);
+/*
+ * setup_net runs the initializers for the network namespace object.
+ */
+static __net_init int setup_net(struct net *net)
+{
+ /* Must be called with net_mutex held */
+ struct pernet_operations *ops;
+ int error;
+
+ atomic_set(&net->count, 1);
+ atomic_set(&net->use_count, 0);
+
+ error = 0;
+ list_for_each_entry(ops, &pernet_list, list) {
+ if (ops->init) {
+ error = ops->init(net);
+ if (error < 0)
+ goto out_undo;
+ }
+ }
+out:
+ return error;
+
+out_undo:
+ /* Walk through the list backwards calling the exit functions
+ * for the pernet modules whose init functions did not fail.
+ */
+ list_for_each_entry_continue_reverse(ops, &pernet_list, list) {
+ if (ops->exit)
+ ops->exit(net);
+ }
+
+ rcu_barrier();
+ goto out;
+}
+
+#ifdef CONFIG_NET_NS
+static struct kmem_cache *net_cachep;
+
static struct net *net_alloc(void)
{
return kmem_cache_zalloc(net_cachep, GFP_KERNEL);
}
+struct net *copy_net_ns(unsigned long flags, struct net *old_net)
+{
+ struct net *new_net = NULL;
+ int err;
+
+ get_net(old_net);
+
+ if (!(flags & CLONE_NEWNET))
+ return old_net;
+
+ err = -ENOMEM;
+ new_net = net_alloc();
+ if (!new_net)
+ goto out;
+
+ mutex_lock(&net_mutex);
+ err = setup_net(new_net);
+ if (err)
+ goto out_unlock;
+
+ rtnl_lock();
+ list_add_tail(&new_net->list, &net_namespace_list);
+ rtnl_unlock();
+
+
+out_unlock:
+ mutex_unlock(&net_mutex);
+out:
+ put_net(old_net);
+ if (err) {
+ net_free(new_net);
+ new_net = ERR_PTR(err);
+ }
+ return new_net;
+}
+
static void net_free(struct net *net)
{
if (!net)
@@ -72,7 +145,6 @@
net_free(net);
}
-
void __put_net(struct net *net)
{
/* Cleanup the network namespace in process context */
@@ -81,88 +153,25 @@
}
EXPORT_SYMBOL_GPL(__put_net);
-/*
- * setup_net runs the initializers for the network namespace object.
- */
-static int setup_net(struct net *net)
-{
- /* Must be called with net_mutex held */
- struct pernet_operations *ops;
- int error;
-
- atomic_set(&net->count, 1);
- atomic_set(&net->use_count, 0);
-
- error = 0;
- list_for_each_entry(ops, &pernet_list, list) {
- if (ops->init) {
- error = ops->init(net);
- if (error < 0)
- goto out_undo;
- }
- }
-out:
- return error;
-
-out_undo:
- /* Walk through the list backwards calling the exit functions
- * for the pernet modules whose init functions did not fail.
- */
- list_for_each_entry_continue_reverse(ops, &pernet_list, list) {
- if (ops->exit)
- ops->exit(net);
- }
- goto out;
-}
-
+#else
struct net *copy_net_ns(unsigned long flags, struct net *old_net)
{
- struct net *new_net = NULL;
- int err;
-
- get_net(old_net);
-
- if (!(flags & CLONE_NEWNET))
- return old_net;
-
-#ifndef CONFIG_NET_NS
- return ERR_PTR(-EINVAL);
-#endif
-
- err = -ENOMEM;
- new_net = net_alloc();
- if (!new_net)
- goto out;
-
- mutex_lock(&net_mutex);
- err = setup_net(new_net);
- if (err)
- goto out_unlock;
-
- rtnl_lock();
- list_add_tail(&new_net->list, &net_namespace_list);
- rtnl_unlock();
-
-
-out_unlock:
- mutex_unlock(&net_mutex);
-out:
- put_net(old_net);
- if (err) {
- net_free(new_net);
- new_net = ERR_PTR(err);
- }
- return new_net;
+ if (flags & CLONE_NEWNET)
+ return ERR_PTR(-EINVAL);
+ return old_net;
}
+#endif
static int __init net_ns_init(void)
{
int err;
printk(KERN_INFO "net_namespace: %zd bytes\n", sizeof(struct net));
+#ifdef CONFIG_NET_NS
net_cachep = kmem_cache_create("net_namespace", sizeof(struct net),
SMP_CACHE_BYTES,
SLAB_PANIC, NULL);
+#endif
mutex_lock(&net_mutex);
err = setup_net(&init_net);
@@ -185,29 +194,28 @@
struct net *net, *undo_net;
int error;
- error = 0;
list_add_tail(&ops->list, list);
- for_each_net(net) {
- if (ops->init) {
+ if (ops->init) {
+ for_each_net(net) {
error = ops->init(net);
if (error)
goto out_undo;
}
}
-out:
- return error;
+ return 0;
out_undo:
/* If I have an error cleanup all namespaces I initialized */
list_del(&ops->list);
- for_each_net(undo_net) {
- if (undo_net == net)
- goto undone;
- if (ops->exit)
+ if (ops->exit) {
+ for_each_net(undo_net) {
+ if (undo_net == net)
+ goto undone;
ops->exit(undo_net);
+ }
}
undone:
- goto out;
+ return error;
}
static void unregister_pernet_operations(struct pernet_operations *ops)
@@ -215,8 +223,8 @@
struct net *net;
list_del(&ops->list);
- for_each_net(net)
- if (ops->exit)
+ if (ops->exit)
+ for_each_net(net)
ops->exit(net);
}
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index bf8d18f..c499b5c 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -116,6 +116,29 @@
* network adapter, forcing superfluous retries and possibly timeouts.
* Thus, we set our budget to greater than 1.
*/
+static int poll_one_napi(struct netpoll_info *npinfo,
+ struct napi_struct *napi, int budget)
+{
+ int work;
+
+ /* net_rx_action's ->poll() invocations and our's are
+ * synchronized by this test which is only made while
+ * holding the napi->poll_lock.
+ */
+ if (!test_bit(NAPI_STATE_SCHED, &napi->state))
+ return budget;
+
+ npinfo->rx_flags |= NETPOLL_RX_DROP;
+ atomic_inc(&trapped);
+
+ work = napi->poll(napi, budget);
+
+ atomic_dec(&trapped);
+ npinfo->rx_flags &= ~NETPOLL_RX_DROP;
+
+ return budget - work;
+}
+
static void poll_napi(struct netpoll *np)
{
struct netpoll_info *npinfo = np->dev->npinfo;
@@ -123,17 +146,13 @@
int budget = 16;
list_for_each_entry(napi, &np->dev->napi_list, dev_list) {
- if (test_bit(NAPI_STATE_SCHED, &napi->state) &&
- napi->poll_owner != smp_processor_id() &&
+ if (napi->poll_owner != smp_processor_id() &&
spin_trylock(&napi->poll_lock)) {
- npinfo->rx_flags |= NETPOLL_RX_DROP;
- atomic_inc(&trapped);
-
- napi->poll(napi, budget);
-
- atomic_dec(&trapped);
- npinfo->rx_flags &= ~NETPOLL_RX_DROP;
+ budget = poll_one_napi(npinfo, napi, budget);
spin_unlock(&napi->poll_lock);
+
+ if (!budget)
+ break;
}
}
}
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 4a2640d..e1ba26f 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -742,7 +742,7 @@
/* Lookup the network namespace */
net = ERR_PTR(-ESRCH);
rcu_read_lock();
- tsk = find_task_by_pid(pid);
+ tsk = find_task_by_vpid(pid);
if (tsk) {
struct nsproxy *nsproxy;
nsproxy = task_nsproxy(tsk);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 4e2c84f..64b50ff 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -415,13 +415,6 @@
n->hdr_len = skb->nohdr ? skb_headroom(skb) : skb->hdr_len;
n->nohdr = 0;
n->destructor = NULL;
-#ifdef CONFIG_NET_CLS_ACT
- /* FIXME What is this and why don't we do it in copy_skb_header? */
- n->tc_verd = SET_TC_VERD(n->tc_verd,0);
- n->tc_verd = CLR_TC_OK2MUNGE(n->tc_verd);
- n->tc_verd = CLR_TC_MUNGED(n->tc_verd);
- C(iif);
-#endif
C(truesize);
atomic_set(&n->users, 1);
C(head);
@@ -2035,8 +2028,8 @@
* Fill the specified scatter-gather list with mappings/pointers into a
* region of the buffer space attached to a socket buffer.
*/
-int
-skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
+static int
+__skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
{
int start = skb_headlen(skb);
int i, copy = start - offset;
@@ -2045,9 +2038,7 @@
if (copy > 0) {
if (copy > len)
copy = len;
- sg_set_page(&sg[elt], virt_to_page(skb->data + offset));
- sg[elt].offset = (unsigned long)(skb->data + offset) % PAGE_SIZE;
- sg[elt].length = copy;
+ sg_set_buf(sg, skb->data + offset, copy);
elt++;
if ((len -= copy) == 0)
return elt;
@@ -2065,9 +2056,8 @@
if (copy > len)
copy = len;
- sg_set_page(&sg[elt], frag->page);
- sg[elt].offset = frag->page_offset+offset-start;
- sg[elt].length = copy;
+ sg_set_page(&sg[elt], frag->page, copy,
+ frag->page_offset+offset-start);
elt++;
if (!(len -= copy))
return elt;
@@ -2088,7 +2078,8 @@
if ((copy = end - offset) > 0) {
if (copy > len)
copy = len;
- elt += skb_to_sgvec(list, sg+elt, offset - start, copy);
+ elt += __skb_to_sgvec(list, sg+elt, offset - start,
+ copy);
if ((len -= copy) == 0)
return elt;
offset += copy;
@@ -2100,6 +2091,15 @@
return elt;
}
+int skb_to_sgvec(struct sk_buff *skb, struct scatterlist *sg, int offset, int len)
+{
+ int nsg = __skb_to_sgvec(skb, sg, offset, len);
+
+ __sg_mark_end(&sg[nsg - 1]);
+
+ return nsg;
+}
+
/**
* skb_cow_data - Check that a socket buffer's data buffers are writable
* @skb: The socket buffer to check.
diff --git a/net/core/sock.c b/net/core/sock.c
index febbcbc..12ad206 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -857,6 +857,67 @@
af_family_keys + sk->sk_family);
}
+static void sock_copy(struct sock *nsk, const struct sock *osk)
+{
+#ifdef CONFIG_SECURITY_NETWORK
+ void *sptr = nsk->sk_security;
+#endif
+
+ memcpy(nsk, osk, osk->sk_prot->obj_size);
+#ifdef CONFIG_SECURITY_NETWORK
+ nsk->sk_security = sptr;
+ security_sk_clone(osk, nsk);
+#endif
+}
+
+static struct sock *sk_prot_alloc(struct proto *prot, gfp_t priority,
+ int family)
+{
+ struct sock *sk;
+ struct kmem_cache *slab;
+
+ slab = prot->slab;
+ if (slab != NULL)
+ sk = kmem_cache_alloc(slab, priority);
+ else
+ sk = kmalloc(prot->obj_size, priority);
+
+ if (sk != NULL) {
+ if (security_sk_alloc(sk, family, priority))
+ goto out_free;
+
+ if (!try_module_get(prot->owner))
+ goto out_free_sec;
+ }
+
+ return sk;
+
+out_free_sec:
+ security_sk_free(sk);
+out_free:
+ if (slab != NULL)
+ kmem_cache_free(slab, sk);
+ else
+ kfree(sk);
+ return NULL;
+}
+
+static void sk_prot_free(struct proto *prot, struct sock *sk)
+{
+ struct kmem_cache *slab;
+ struct module *owner;
+
+ owner = prot->owner;
+ slab = prot->slab;
+
+ security_sk_free(sk);
+ if (slab != NULL)
+ kmem_cache_free(slab, sk);
+ else
+ kfree(sk);
+ module_put(owner);
+}
+
/**
* sk_alloc - All socket objects are allocated here
* @net: the applicable net namespace
@@ -866,49 +927,28 @@
* @zero_it: if we should zero the newly allocated sock
*/
struct sock *sk_alloc(struct net *net, int family, gfp_t priority,
- struct proto *prot, int zero_it)
+ struct proto *prot)
{
- struct sock *sk = NULL;
- struct kmem_cache *slab = prot->slab;
+ struct sock *sk;
- if (slab != NULL)
- sk = kmem_cache_alloc(slab, priority);
- else
- sk = kmalloc(prot->obj_size, priority);
-
+ sk = sk_prot_alloc(prot, priority | __GFP_ZERO, family);
if (sk) {
- if (zero_it) {
- memset(sk, 0, prot->obj_size);
- sk->sk_family = family;
- /*
- * See comment in struct sock definition to understand
- * why we need sk_prot_creator -acme
- */
- sk->sk_prot = sk->sk_prot_creator = prot;
- sock_lock_init(sk);
- sk->sk_net = get_net(net);
- }
-
- if (security_sk_alloc(sk, family, priority))
- goto out_free;
-
- if (!try_module_get(prot->owner))
- goto out_free;
+ sk->sk_family = family;
+ /*
+ * See comment in struct sock definition to understand
+ * why we need sk_prot_creator -acme
+ */
+ sk->sk_prot = sk->sk_prot_creator = prot;
+ sock_lock_init(sk);
+ sk->sk_net = get_net(net);
}
- return sk;
-out_free:
- if (slab != NULL)
- kmem_cache_free(slab, sk);
- else
- kfree(sk);
- return NULL;
+ return sk;
}
void sk_free(struct sock *sk)
{
struct sk_filter *filter;
- struct module *owner = sk->sk_prot_creator->owner;
if (sk->sk_destruct)
sk->sk_destruct(sk);
@@ -925,25 +965,22 @@
printk(KERN_DEBUG "%s: optmem leakage (%d bytes) detected.\n",
__FUNCTION__, atomic_read(&sk->sk_omem_alloc));
- security_sk_free(sk);
put_net(sk->sk_net);
- if (sk->sk_prot_creator->slab != NULL)
- kmem_cache_free(sk->sk_prot_creator->slab, sk);
- else
- kfree(sk);
- module_put(owner);
+ sk_prot_free(sk->sk_prot_creator, sk);
}
struct sock *sk_clone(const struct sock *sk, const gfp_t priority)
{
- struct sock *newsk = sk_alloc(sk->sk_net, sk->sk_family, priority, sk->sk_prot, 0);
+ struct sock *newsk;
+ newsk = sk_prot_alloc(sk->sk_prot, priority, sk->sk_family);
if (newsk != NULL) {
struct sk_filter *filter;
sock_copy(newsk, sk);
/* SANITY */
+ get_net(newsk->sk_net);
sk_node_init(&newsk->sk_node);
sock_lock_init(newsk);
bh_lock_sock(newsk);
@@ -1649,7 +1686,6 @@
net_enable_timestamp();
}
}
-EXPORT_SYMBOL(sock_enable_timestamp);
/*
* Get a socket option on an socket.
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index 6d5ea97..113cc72 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -9,25 +9,12 @@
#include <linux/sysctl.h>
#include <linux/module.h>
#include <linux/socket.h>
+#include <linux/netdevice.h>
#include <net/sock.h>
+#include <net/xfrm.h>
#ifdef CONFIG_SYSCTL
-extern int netdev_max_backlog;
-extern int weight_p;
-
-extern __u32 sysctl_wmem_max;
-extern __u32 sysctl_rmem_max;
-
-extern int sysctl_core_destroy_delay;
-
-#ifdef CONFIG_XFRM
-extern u32 sysctl_xfrm_aevent_etime;
-extern u32 sysctl_xfrm_aevent_rseqth;
-extern int sysctl_xfrm_larval_drop;
-extern u32 sysctl_xfrm_acq_expires;
-#endif
-
ctl_table core_table[] = {
#ifdef CONFIG_NET
{
diff --git a/net/dccp/ccids/ccid2.c b/net/dccp/ccids/ccid2.c
index 426008e..d694656 100644
--- a/net/dccp/ccids/ccid2.c
+++ b/net/dccp/ccids/ccid2.c
@@ -750,20 +750,16 @@
*/
hctx->ccid2hctx_ssthresh = ~0;
hctx->ccid2hctx_numdupack = 3;
- hctx->ccid2hctx_seqbufc = 0;
/* XXX init ~ to window size... */
if (ccid2_hc_tx_alloc_seq(hctx))
return -ENOMEM;
- hctx->ccid2hctx_sent = 0;
hctx->ccid2hctx_rto = 3 * HZ;
ccid2_change_srtt(hctx, -1);
hctx->ccid2hctx_rttvar = -1;
- hctx->ccid2hctx_lastrtt = 0;
hctx->ccid2hctx_rpdupack = -1;
hctx->ccid2hctx_last_cong = jiffies;
- hctx->ccid2hctx_high_ack = 0;
hctx->ccid2hctx_rtotimer.function = &ccid2_hc_tx_rto_expire;
hctx->ccid2hctx_rtotimer.data = (unsigned long)sk;
diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index 25772c3..19b3358 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -40,6 +40,8 @@
#include "lib/tfrc.h"
#include "ccid3.h"
+#include <asm/unaligned.h>
+
#ifdef CONFIG_IP_DCCP_CCID3_DEBUG
static int ccid3_debug;
#define ccid3_pr_debug(format, a...) DCCP_PR_DEBUG(ccid3_debug, format, ##a)
@@ -544,6 +546,7 @@
const struct dccp_sock *dp = dccp_sk(sk);
struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
struct ccid3_options_received *opt_recv;
+ __be32 opt_val;
opt_recv = &hctx->ccid3hctx_options_received;
@@ -563,8 +566,8 @@
dccp_role(sk), sk, len);
rc = -EINVAL;
} else {
- opt_recv->ccid3or_loss_event_rate =
- ntohl(*(__be32 *)value);
+ opt_val = get_unaligned((__be32 *)value);
+ opt_recv->ccid3or_loss_event_rate = ntohl(opt_val);
ccid3_pr_debug("%s(%p), LOSS_EVENT_RATE=%u\n",
dccp_role(sk), sk,
opt_recv->ccid3or_loss_event_rate);
@@ -585,8 +588,8 @@
dccp_role(sk), sk, len);
rc = -EINVAL;
} else {
- opt_recv->ccid3or_receive_rate =
- ntohl(*(__be32 *)value);
+ opt_val = get_unaligned((__be32 *)value);
+ opt_recv->ccid3or_receive_rate = ntohl(opt_val);
ccid3_pr_debug("%s(%p), RECEIVE_RATE=%u\n",
dccp_role(sk), sk,
opt_recv->ccid3or_receive_rate);
@@ -601,8 +604,6 @@
{
struct ccid3_hc_tx_sock *hctx = ccid_priv(ccid);
- hctx->ccid3hctx_s = 0;
- hctx->ccid3hctx_rtt = 0;
hctx->ccid3hctx_state = TFRC_SSTATE_NO_SENT;
INIT_LIST_HEAD(&hctx->ccid3hctx_hist);
@@ -963,8 +964,6 @@
INIT_LIST_HEAD(&hcrx->ccid3hcrx_li_hist);
hcrx->ccid3hcrx_tstamp_last_feedback =
hcrx->ccid3hcrx_tstamp_last_ack = ktime_get_real();
- hcrx->ccid3hcrx_s = 0;
- hcrx->ccid3hcrx_rtt = 0;
return 0;
}
diff --git a/net/dccp/input.c b/net/dccp/input.c
index 3560a2a..1ce1010 100644
--- a/net/dccp/input.c
+++ b/net/dccp/input.c
@@ -58,6 +58,42 @@
dccp_send_close(sk, 0);
}
+static u8 dccp_reset_code_convert(const u8 code)
+{
+ const u8 error_code[] = {
+ [DCCP_RESET_CODE_CLOSED] = 0, /* normal termination */
+ [DCCP_RESET_CODE_UNSPECIFIED] = 0, /* nothing known */
+ [DCCP_RESET_CODE_ABORTED] = ECONNRESET,
+
+ [DCCP_RESET_CODE_NO_CONNECTION] = ECONNREFUSED,
+ [DCCP_RESET_CODE_CONNECTION_REFUSED] = ECONNREFUSED,
+ [DCCP_RESET_CODE_TOO_BUSY] = EUSERS,
+ [DCCP_RESET_CODE_AGGRESSION_PENALTY] = EDQUOT,
+
+ [DCCP_RESET_CODE_PACKET_ERROR] = ENOMSG,
+ [DCCP_RESET_CODE_BAD_INIT_COOKIE] = EBADR,
+ [DCCP_RESET_CODE_BAD_SERVICE_CODE] = EBADRQC,
+ [DCCP_RESET_CODE_OPTION_ERROR] = EILSEQ,
+ [DCCP_RESET_CODE_MANDATORY_ERROR] = EOPNOTSUPP,
+ };
+
+ return code >= DCCP_MAX_RESET_CODES ? 0 : error_code[code];
+}
+
+static void dccp_rcv_reset(struct sock *sk, struct sk_buff *skb)
+{
+ u8 err = dccp_reset_code_convert(dccp_hdr_reset(skb)->dccph_reset_code);
+
+ sk->sk_err = err;
+
+ /* Queue the equivalent of TCP fin so that dccp_recvmsg exits the loop */
+ dccp_fin(sk, skb);
+
+ if (err && !sock_flag(sk, SOCK_DEAD))
+ sk_wake_async(sk, 0, POLL_ERR);
+ dccp_time_wait(sk, DCCP_TIME_WAIT, 0);
+}
+
static void dccp_event_ack_recv(struct sock *sk, struct sk_buff *skb)
{
struct dccp_sock *dp = dccp_sk(sk);
@@ -191,9 +227,8 @@
* S.state := TIMEWAIT
* Set TIMEWAIT timer
* Drop packet and return
- */
- dccp_fin(sk, skb);
- dccp_time_wait(sk, DCCP_TIME_WAIT, 0);
+ */
+ dccp_rcv_reset(sk, skb);
return 0;
case DCCP_PKT_CLOSEREQ:
dccp_rcv_closereq(sk, skb);
@@ -521,12 +556,7 @@
* Drop packet and return
*/
if (dh->dccph_type == DCCP_PKT_RESET) {
- /*
- * Queue the equivalent of TCP fin so that dccp_recvmsg
- * exits the loop
- */
- dccp_fin(sk, skb);
- dccp_time_wait(sk, DCCP_TIME_WAIT, 0);
+ dccp_rcv_reset(sk, skb);
return 0;
/*
* Step 7: Check for unexpected packet types
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index 222549a..01a6a80 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -241,8 +241,8 @@
goto out;
dp = dccp_sk(sk);
- seq = dccp_hdr_seq(skb);
- if (sk->sk_state != DCCP_LISTEN &&
+ seq = dccp_hdr_seq(dh);
+ if ((1 << sk->sk_state) & ~(DCCPF_REQUESTING | DCCPF_LISTEN) &&
!between48(seq, dp->dccps_swl, dp->dccps_swh)) {
NET_INC_STATS_BH(LINUX_MIB_OUTOFWINDOWICMPS);
goto out;
@@ -795,7 +795,7 @@
dh = dccp_hdr(skb);
- DCCP_SKB_CB(skb)->dccpd_seq = dccp_hdr_seq(skb);
+ DCCP_SKB_CB(skb)->dccpd_seq = dccp_hdr_seq(dh);
DCCP_SKB_CB(skb)->dccpd_type = dh->dccph_type;
dccp_pr_debug("%8.8s "
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index bbadd66..62428ff 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -173,7 +173,7 @@
icmpv6_err_convert(type, code, &err);
- seq = DCCP_SKB_CB(skb)->dccpd_seq;
+ seq = dccp_hdr_seq(dh);
/* Might be for an request_sock */
switch (sk->sk_state) {
struct request_sock *req, **prev;
@@ -787,7 +787,7 @@
dh = dccp_hdr(skb);
- DCCP_SKB_CB(skb)->dccpd_seq = dccp_hdr_seq(skb);
+ DCCP_SKB_CB(skb)->dccpd_seq = dccp_hdr_seq(dh);
DCCP_SKB_CB(skb)->dccpd_type = dh->dccph_type;
if (dccp_packet_without_ack(skb))
diff --git a/net/dccp/options.c b/net/dccp/options.c
index d361b55..d286cff 100644
--- a/net/dccp/options.c
+++ b/net/dccp/options.c
@@ -14,6 +14,7 @@
#include <linux/dccp.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <asm/unaligned.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
@@ -59,6 +60,7 @@
unsigned char opt, len;
unsigned char *value;
u32 elapsed_time;
+ __be32 opt_val;
int rc;
int mandatory = 0;
@@ -145,7 +147,8 @@
if (len != 4)
goto out_invalid_option;
- opt_recv->dccpor_timestamp = ntohl(*(__be32 *)value);
+ opt_val = get_unaligned((__be32 *)value);
+ opt_recv->dccpor_timestamp = ntohl(opt_val);
dp->dccps_timestamp_echo = opt_recv->dccpor_timestamp;
dp->dccps_timestamp_time = ktime_get_real();
@@ -159,7 +162,8 @@
if (len != 4 && len != 6 && len != 8)
goto out_invalid_option;
- opt_recv->dccpor_timestamp_echo = ntohl(*(__be32 *)value);
+ opt_val = get_unaligned((__be32 *)value);
+ opt_recv->dccpor_timestamp_echo = ntohl(opt_val);
dccp_pr_debug("%s rx opt: TIMESTAMP_ECHO=%u, len=%d, "
"ackno=%llu", dccp_role(sk),
@@ -168,16 +172,20 @@
(unsigned long long)
DCCP_SKB_CB(skb)->dccpd_ack_seq);
+ value += 4;
- if (len == 4) {
+ if (len == 4) { /* no elapsed time included */
dccp_pr_debug_cat("\n");
break;
}
- if (len == 6)
- elapsed_time = ntohs(*(__be16 *)(value + 4));
- else
- elapsed_time = ntohl(*(__be32 *)(value + 4));
+ if (len == 6) { /* 2-byte elapsed time */
+ __be16 opt_val2 = get_unaligned((__be16 *)value);
+ elapsed_time = ntohs(opt_val2);
+ } else { /* 4-byte elapsed time */
+ opt_val = get_unaligned((__be32 *)value);
+ elapsed_time = ntohl(opt_val);
+ }
dccp_pr_debug_cat(", ELAPSED_TIME=%u\n", elapsed_time);
@@ -192,10 +200,13 @@
if (pkt_type == DCCP_PKT_DATA)
continue;
- if (len == 2)
- elapsed_time = ntohs(*(__be16 *)value);
- else
- elapsed_time = ntohl(*(__be32 *)value);
+ if (len == 2) {
+ __be16 opt_val2 = get_unaligned((__be16 *)value);
+ elapsed_time = ntohs(opt_val2);
+ } else {
+ opt_val = get_unaligned((__be32 *)value);
+ elapsed_time = ntohl(opt_val);
+ }
if (elapsed_time > opt_recv->dccpor_elapsed_time)
opt_recv->dccpor_elapsed_time = elapsed_time;
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index cc9bf1c..d849739 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -26,6 +26,7 @@
#include <net/sock.h>
#include <net/xfrm.h>
+#include <asm/ioctls.h>
#include <asm/semaphore.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
@@ -378,8 +379,36 @@
int dccp_ioctl(struct sock *sk, int cmd, unsigned long arg)
{
- dccp_pr_debug("entry\n");
- return -ENOIOCTLCMD;
+ int rc = -ENOTCONN;
+
+ lock_sock(sk);
+
+ if (sk->sk_state == DCCP_LISTEN)
+ goto out;
+
+ switch (cmd) {
+ case SIOCINQ: {
+ struct sk_buff *skb;
+ unsigned long amount = 0;
+
+ skb = skb_peek(&sk->sk_receive_queue);
+ if (skb != NULL) {
+ /*
+ * We will only return the amount of this packet since
+ * that is all that will be read.
+ */
+ amount = skb->len;
+ }
+ rc = put_user(amount, (int __user *)arg);
+ }
+ break;
+ default:
+ rc = -ENOIOCTLCMD;
+ break;
+ }
+out:
+ release_sock(sk);
+ return rc;
}
EXPORT_SYMBOL_GPL(dccp_ioctl);
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index aabe98d..57d5749 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -474,7 +474,7 @@
static struct sock *dn_alloc_sock(struct net *net, struct socket *sock, gfp_t gfp)
{
struct dn_scp *scp;
- struct sock *sk = sk_alloc(net, PF_DECnet, gfp, &dn_proto, 1);
+ struct sock *sk = sk_alloc(net, PF_DECnet, gfp, &dn_proto);
if (!sk)
goto out;
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index 9cae16b..f70df07 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -624,7 +624,7 @@
sock->state = SS_UNCONNECTED;
err = -ENOBUFS;
- sk = sk_alloc(net, PF_ECONET, GFP_KERNEL, &econet_proto, 1);
+ sk = sk_alloc(net, PF_ECONET, GFP_KERNEL, &econet_proto);
if (sk == NULL)
goto out;
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index ed8a3d4..6b2e454 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -298,6 +298,14 @@
return 0;
}
+static int eth_validate_addr(struct net_device *dev)
+{
+ if (!is_valid_ether_addr(dev->dev_addr))
+ return -EINVAL;
+
+ return 0;
+}
+
const struct header_ops eth_header_ops ____cacheline_aligned = {
.create = eth_header,
.parse = eth_header_parse,
@@ -317,6 +325,7 @@
dev->change_mtu = eth_change_mtu;
dev->set_mac_address = eth_mac_addr;
+ dev->validate_addr = eth_validate_addr;
dev->type = ARPHRD_ETHER;
dev->hard_header_len = ETH_HLEN;
diff --git a/net/ieee80211/ieee80211_crypt_tkip.c b/net/ieee80211/ieee80211_crypt_tkip.c
index 8117776..4cce353 100644
--- a/net/ieee80211/ieee80211_crypt_tkip.c
+++ b/net/ieee80211/ieee80211_crypt_tkip.c
@@ -25,7 +25,7 @@
#include <net/ieee80211.h>
#include <linux/crypto.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <linux/crc32.h>
MODULE_AUTHOR("Jouni Malinen");
@@ -537,13 +537,8 @@
return -1;
}
sg_init_table(sg, 2);
- sg_set_page(&sg[0], virt_to_page(hdr));
- sg[0].offset = offset_in_page(hdr);
- sg[0].length = 16;
-
- sg_set_page(&sg[1], virt_to_page(data));
- sg[1].offset = offset_in_page(data);
- sg[1].length = data_len;
+ sg_set_buf(&sg[0], hdr, 16);
+ sg_set_buf(&sg[1], data, data_len);
if (crypto_hash_setkey(tfm_michael, key, 8))
return -1;
diff --git a/net/ieee80211/ieee80211_crypt_wep.c b/net/ieee80211/ieee80211_crypt_wep.c
index 9693429..866fc04 100644
--- a/net/ieee80211/ieee80211_crypt_wep.c
+++ b/net/ieee80211/ieee80211_crypt_wep.c
@@ -22,7 +22,7 @@
#include <net/ieee80211.h>
#include <linux/crypto.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <linux/crc32.h>
MODULE_AUTHOR("Jouni Malinen");
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 621b128..d2f22e7 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -323,7 +323,7 @@
BUG_TRAP(answer_prot->slab != NULL);
err = -ENOBUFS;
- sk = sk_alloc(net, PF_INET, GFP_KERNEL, answer_prot, 1);
+ sk = sk_alloc(net, PF_INET, GFP_KERNEL, answer_prot);
if (sk == NULL)
goto out;
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index 805a78e6..f18e88b 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -504,22 +504,16 @@
INIT_RCU_HEAD(&doi_def->rcu);
INIT_LIST_HEAD(&doi_def->dom_list);
- rcu_read_lock();
- if (cipso_v4_doi_search(doi_def->doi) != NULL)
- goto doi_add_failure_rlock;
spin_lock(&cipso_v4_doi_list_lock);
if (cipso_v4_doi_search(doi_def->doi) != NULL)
- goto doi_add_failure_slock;
+ goto doi_add_failure;
list_add_tail_rcu(&doi_def->list, &cipso_v4_doi_list);
spin_unlock(&cipso_v4_doi_list_lock);
- rcu_read_unlock();
return 0;
-doi_add_failure_slock:
+doi_add_failure:
spin_unlock(&cipso_v4_doi_list_lock);
-doi_add_failure_rlock:
- rcu_read_unlock();
return -EEXIST;
}
@@ -543,29 +537,23 @@
struct cipso_v4_doi *doi_def;
struct cipso_v4_domhsh_entry *dom_iter;
- rcu_read_lock();
- if (cipso_v4_doi_search(doi) != NULL) {
- spin_lock(&cipso_v4_doi_list_lock);
- doi_def = cipso_v4_doi_search(doi);
- if (doi_def == NULL) {
- spin_unlock(&cipso_v4_doi_list_lock);
- rcu_read_unlock();
- return -ENOENT;
- }
+ spin_lock(&cipso_v4_doi_list_lock);
+ doi_def = cipso_v4_doi_search(doi);
+ if (doi_def != NULL) {
doi_def->valid = 0;
list_del_rcu(&doi_def->list);
spin_unlock(&cipso_v4_doi_list_lock);
+ rcu_read_lock();
list_for_each_entry_rcu(dom_iter, &doi_def->dom_list, list)
if (dom_iter->valid)
netlbl_domhsh_remove(dom_iter->domain,
audit_info);
- cipso_v4_cache_invalidate();
rcu_read_unlock();
-
+ cipso_v4_cache_invalidate();
call_rcu(&doi_def->rcu, callback);
return 0;
}
- rcu_read_unlock();
+ spin_unlock(&cipso_v4_doi_list_lock);
return -ENOENT;
}
@@ -653,22 +641,19 @@
new_dom->valid = 1;
INIT_RCU_HEAD(&new_dom->rcu);
- rcu_read_lock();
spin_lock(&cipso_v4_doi_list_lock);
- list_for_each_entry_rcu(iter, &doi_def->dom_list, list)
+ list_for_each_entry(iter, &doi_def->dom_list, list)
if (iter->valid &&
((domain != NULL && iter->domain != NULL &&
strcmp(iter->domain, domain) == 0) ||
(domain == NULL && iter->domain == NULL))) {
spin_unlock(&cipso_v4_doi_list_lock);
- rcu_read_unlock();
kfree(new_dom->domain);
kfree(new_dom);
return -EEXIST;
}
list_add_tail_rcu(&new_dom->list, &doi_def->dom_list);
spin_unlock(&cipso_v4_doi_list_lock);
- rcu_read_unlock();
return 0;
}
@@ -689,9 +674,8 @@
{
struct cipso_v4_domhsh_entry *iter;
- rcu_read_lock();
spin_lock(&cipso_v4_doi_list_lock);
- list_for_each_entry_rcu(iter, &doi_def->dom_list, list)
+ list_for_each_entry(iter, &doi_def->dom_list, list)
if (iter->valid &&
((domain != NULL && iter->domain != NULL &&
strcmp(iter->domain, domain) == 0) ||
@@ -699,13 +683,10 @@
iter->valid = 0;
list_del_rcu(&iter->list);
spin_unlock(&cipso_v4_doi_list_lock);
- rcu_read_unlock();
call_rcu(&iter->rcu, cipso_v4_doi_domhsh_free);
-
return 0;
}
spin_unlock(&cipso_v4_doi_list_lock);
- rcu_read_unlock();
return -ENOENT;
}
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 6b1a31a74..c31bccb 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -3,7 +3,7 @@
#include <net/ip.h>
#include <net/xfrm.h>
#include <net/esp.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <linux/crypto.h>
#include <linux/kernel.h>
#include <linux/pfkeyv2.h>
@@ -110,7 +110,11 @@
if (!sg)
goto unlock;
}
- skb_to_sgvec(skb, sg, esph->enc_data+esp->conf.ivlen-skb->data, clen);
+ sg_init_table(sg, nfrags);
+ skb_to_sgvec(skb, sg,
+ esph->enc_data +
+ esp->conf.ivlen -
+ skb->data, clen);
err = crypto_blkcipher_encrypt(&desc, sg, sg, clen);
if (unlikely(sg != &esp->sgbuf[0]))
kfree(sg);
@@ -201,7 +205,10 @@
if (!sg)
goto out;
}
- skb_to_sgvec(skb, sg, sizeof(*esph) + esp->conf.ivlen, elen);
+ sg_init_table(sg, nfrags);
+ skb_to_sgvec(skb, sg,
+ sizeof(*esph) + esp->conf.ivlen,
+ elen);
err = crypto_blkcipher_decrypt(&desc, sg, sg, elen);
if (unlikely(sg != &esp->sgbuf[0]))
kfree(sg);
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 78b514b..6012390 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -128,13 +128,14 @@
struct flowi fl = { .nl_u = { .ip4_u = { .daddr = addr } } };
struct fib_result res;
struct net_device *dev = NULL;
+ struct fib_table *local_table;
#ifdef CONFIG_IP_MULTIPLE_TABLES
res.r = NULL;
#endif
- if (!ip_fib_local_table ||
- ip_fib_local_table->tb_lookup(ip_fib_local_table, &fl, &res))
+ local_table = fib_get_table(RT_TABLE_LOCAL);
+ if (!local_table || local_table->tb_lookup(local_table, &fl, &res))
return NULL;
if (res.type != RTN_LOCAL)
goto out;
@@ -152,6 +153,7 @@
struct flowi fl = { .nl_u = { .ip4_u = { .daddr = addr } } };
struct fib_result res;
unsigned ret = RTN_BROADCAST;
+ struct fib_table *local_table;
if (ZERONET(addr) || BADCLASS(addr))
return RTN_BROADCAST;
@@ -162,10 +164,10 @@
res.r = NULL;
#endif
- if (ip_fib_local_table) {
+ local_table = fib_get_table(RT_TABLE_LOCAL);
+ if (local_table) {
ret = RTN_UNICAST;
- if (!ip_fib_local_table->tb_lookup(ip_fib_local_table,
- &fl, &res)) {
+ if (!local_table->tb_lookup(local_table, &fl, &res)) {
ret = res.type;
fib_res_put(&res);
}
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 272c69e..233de06 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -1104,5 +1104,4 @@
EXPORT_SYMBOL(icmp_err_convert);
EXPORT_SYMBOL(icmp_send);
EXPORT_SYMBOL(icmp_statistics);
-EXPORT_SYMBOL(icmpmsg_statistics);
EXPORT_SYMBOL(xrlim_allow);
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index f151900..02b02a8 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -674,7 +674,7 @@
struct rtable *rt; /* Route to the other host */
struct net_device *tdev; /* Device to other host */
struct iphdr *iph; /* Our new IP header */
- int max_headroom; /* The extra header space needed */
+ unsigned int max_headroom; /* The extra header space needed */
int gre_hlen;
__be32 dst;
int mtu;
@@ -1033,7 +1033,6 @@
return 0;
}
-#ifdef CONFIG_NET_IPGRE_BROADCAST
/* Nice toy. Unfortunately, useless in real life :-)
It allows to construct virtual multiprotocol broadcast "LAN"
over the Internet, provided multicast routing is tuned.
@@ -1092,10 +1091,19 @@
return -t->hlen;
}
+static int ipgre_header_parse(const struct sk_buff *skb, unsigned char *haddr)
+{
+ struct iphdr *iph = (struct iphdr*) skb_mac_header(skb);
+ memcpy(haddr, &iph->saddr, 4);
+ return 4;
+}
+
static const struct header_ops ipgre_header_ops = {
.create = ipgre_header,
+ .parse = ipgre_header_parse,
};
+#ifdef CONFIG_NET_IPGRE_BROADCAST
static int ipgre_open(struct net_device *dev)
{
struct ip_tunnel *t = netdev_priv(dev);
@@ -1197,6 +1205,8 @@
dev->stop = ipgre_close;
}
#endif
+ } else {
+ dev->header_ops = &ipgre_header_ops;
}
if (!tdev && tunnel->parms.link)
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index f508835..e5f7dc2 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -161,7 +161,7 @@
struct dst_entry *dst = skb->dst;
struct rtable *rt = (struct rtable *)dst;
struct net_device *dev = dst->dev;
- int hh_len = LL_RESERVED_SPACE(dev);
+ unsigned int hh_len = LL_RESERVED_SPACE(dev);
if (rt->rt_type == RTN_MULTICAST)
IP_INC_STATS(IPSTATS_MIB_OUTMCASTPKTS);
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index 5cd5bbe..8c2b2b0 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -515,7 +515,7 @@
struct net_device *tdev; /* Device to other host */
struct iphdr *old_iph = ip_hdr(skb);
struct iphdr *iph; /* Our new IP header */
- int max_headroom; /* The extra header space needed */
+ unsigned int max_headroom; /* The extra header space needed */
__be32 dst = tiph->daddr;
int mtu;
diff --git a/net/ipv4/ipvs/ip_vs_lblcr.c b/net/ipv4/ipvs/ip_vs_lblcr.c
index 6a1fec4..427b593 100644
--- a/net/ipv4/ipvs/ip_vs_lblcr.c
+++ b/net/ipv4/ipvs/ip_vs_lblcr.c
@@ -48,8 +48,6 @@
/* for sysctl */
#include <linux/fs.h>
#include <linux/sysctl.h>
-/* for proc_net_create/proc_net_remove */
-#include <linux/proc_fs.h>
#include <net/net_namespace.h>
#include <net/ip_vs.h>
@@ -547,71 +545,6 @@
mod_timer(&tbl->periodic_timer, jiffies+CHECK_EXPIRE_INTERVAL);
}
-
-#ifdef CONFIG_IP_VS_LBLCR_DEBUG
-static struct ip_vs_lblcr_table *lblcr_table_list;
-
-/*
- * /proc/net/ip_vs_lblcr to display the mappings of
- * destination IP address <==> its serverSet
- */
-static int
-ip_vs_lblcr_getinfo(char *buffer, char **start, off_t offset, int length)
-{
- off_t pos=0, begin;
- int len=0, size;
- struct ip_vs_lblcr_table *tbl;
- unsigned long now = jiffies;
- int i;
- struct ip_vs_lblcr_entry *en;
-
- tbl = lblcr_table_list;
-
- size = sprintf(buffer, "LastTime Dest IP address Server set\n");
- pos += size;
- len += size;
-
- for (i=0; i<IP_VS_LBLCR_TAB_SIZE; i++) {
- read_lock_bh(&tbl->lock);
- list_for_each_entry(en, &tbl->bucket[i], list) {
- char tbuf[16];
- struct ip_vs_dest_list *d;
-
- sprintf(tbuf, "%u.%u.%u.%u", NIPQUAD(en->addr));
- size = sprintf(buffer+len, "%8lu %-16s ",
- now-en->lastuse, tbuf);
-
- read_lock(&en->set.lock);
- for (d=en->set.list; d!=NULL; d=d->next) {
- size += sprintf(buffer+len+size,
- "%u.%u.%u.%u ",
- NIPQUAD(d->dest->addr));
- }
- read_unlock(&en->set.lock);
- size += sprintf(buffer+len+size, "\n");
- len += size;
- pos += size;
- if (pos <= offset)
- len=0;
- if (pos >= offset+length) {
- read_unlock_bh(&tbl->lock);
- goto done;
- }
- }
- read_unlock_bh(&tbl->lock);
- }
-
- done:
- begin = len - (pos - offset);
- *start = buffer + begin;
- len -= begin;
- if(len>length)
- len = length;
- return len;
-}
-#endif
-
-
static int ip_vs_lblcr_init_svc(struct ip_vs_service *svc)
{
int i;
@@ -650,9 +583,6 @@
tbl->periodic_timer.expires = jiffies+CHECK_EXPIRE_INTERVAL;
add_timer(&tbl->periodic_timer);
-#ifdef CONFIG_IP_VS_LBLCR_DEBUG
- lblcr_table_list = tbl;
-#endif
return 0;
}
@@ -843,18 +773,12 @@
{
INIT_LIST_HEAD(&ip_vs_lblcr_scheduler.n_list);
sysctl_header = register_sysctl_table(lblcr_root_table);
-#ifdef CONFIG_IP_VS_LBLCR_DEBUG
- proc_net_create(&init_net, "ip_vs_lblcr", 0, ip_vs_lblcr_getinfo);
-#endif
return register_ip_vs_scheduler(&ip_vs_lblcr_scheduler);
}
static void __exit ip_vs_lblcr_cleanup(void)
{
-#ifdef CONFIG_IP_VS_LBLCR_DEBUG
- proc_net_remove(&init_net, "ip_vs_lblcr");
-#endif
unregister_sysctl_table(sysctl_header);
unregister_ip_vs_scheduler(&ip_vs_lblcr_scheduler);
}
diff --git a/net/ipv4/ipvs/ip_vs_sync.c b/net/ipv4/ipvs/ip_vs_sync.c
index c99f2a3..0d4d972 100644
--- a/net/ipv4/ipvs/ip_vs_sync.c
+++ b/net/ipv4/ipvs/ip_vs_sync.c
@@ -72,7 +72,6 @@
int state;
};
-#define IP_VS_SYNC_CONN_TIMEOUT (3*60*HZ)
#define SIMPLE_CONN_SIZE (sizeof(struct ip_vs_sync_conn))
#define FULL_CONN_SIZE \
(sizeof(struct ip_vs_sync_conn) + sizeof(struct ip_vs_sync_conn_options))
@@ -284,6 +283,7 @@
struct ip_vs_sync_conn *s;
struct ip_vs_sync_conn_options *opt;
struct ip_vs_conn *cp;
+ struct ip_vs_protocol *pp;
char *p;
int i;
@@ -342,7 +342,8 @@
p += SIMPLE_CONN_SIZE;
atomic_set(&cp->in_pkts, sysctl_ip_vs_sync_threshold[0]);
- cp->timeout = IP_VS_SYNC_CONN_TIMEOUT;
+ pp = ip_vs_proto_get(s->protocol);
+ cp->timeout = pp->timeout_table[cp->state];
ip_vs_conn_put(cp);
if (p > buffer+buflen) {
diff --git a/net/ipv4/ipvs/ip_vs_xmit.c b/net/ipv4/ipvs/ip_vs_xmit.c
index d0a92de..7c074e3 100644
--- a/net/ipv4/ipvs/ip_vs_xmit.c
+++ b/net/ipv4/ipvs/ip_vs_xmit.c
@@ -325,7 +325,7 @@
__be16 df = old_iph->frag_off;
sk_buff_data_t old_transport_header = skb->transport_header;
struct iphdr *iph; /* Our new IP header */
- int max_headroom; /* The extra header space needed */
+ unsigned int max_headroom; /* The extra header space needed */
int mtu;
EnterFunction(10);
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index fa97947..9aca9c5 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -128,7 +128,7 @@
eg. UNICAST, LOCAL, BROADCAST, ...
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
# `filter', generic and specific targets
config IP_NF_FILTER
@@ -371,7 +371,7 @@
and OUTPUT chains.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
# ARP tables
config IP_NF_ARPTABLES
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index fd16cb8..ffdccc0 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -121,14 +121,6 @@
SNMP_MIB_SENTINEL
};
-static const struct snmp_mib snmp4_icmp_list[] = {
- SNMP_MIB_ITEM("InMsgs", ICMP_MIB_INMSGS),
- SNMP_MIB_ITEM("InErrors", ICMP_MIB_INERRORS),
- SNMP_MIB_ITEM("OutMsgs", ICMP_MIB_OUTMSGS),
- SNMP_MIB_ITEM("OutErrors", ICMP_MIB_OUTERRORS),
- SNMP_MIB_SENTINEL
-};
-
static struct {
char *name;
int index;
@@ -312,7 +304,7 @@
for (i=0; icmpmibmap[i].name != NULL; i++)
seq_printf(seq, " %lu",
snmp_fold_field((void **) icmpmsg_statistics,
- icmpmibmap[i].index));
+ icmpmibmap[i].index | 0x100));
}
/*
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 2e6ad6d..c64072b 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2453,7 +2453,7 @@
0,
&tcp_hashinfo.ehash_size,
NULL,
- 0);
+ thash_entries ? 0 : 512 * 1024);
tcp_hashinfo.ehash_size = 1 << tcp_hashinfo.ehash_size;
for (i = 0; i < tcp_hashinfo.ehash_size; i++) {
rwlock_init(&tcp_hashinfo.ehash[i].lock);
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 9288220..ca9590f 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -103,7 +103,7 @@
#define FLAG_SLOWPATH 0x100 /* Do not skip RFC checks for window update.*/
#define FLAG_ONLY_ORIG_SACKED 0x200 /* SACKs only non-rexmit sent before RTO */
#define FLAG_SND_UNA_ADVANCED 0x400 /* Snd_una was changed (!= FLAG_DATA_ACKED) */
-#define FLAG_DSACKING_ACK 0x800 /* SACK blocks contained DSACK info */
+#define FLAG_DSACKING_ACK 0x800 /* SACK blocks contained D-SACK info */
#define FLAG_NONHEAD_RETRANS_ACKED 0x1000 /* Non-head rexmitted data was ACKed */
#define FLAG_ACKED (FLAG_DATA_ACKED|FLAG_SYN_ACKED)
@@ -866,7 +866,7 @@
tp->rx_opt.sack_ok &= ~2;
}
-/* Take a notice that peer is sending DSACKs */
+/* Take a notice that peer is sending D-SACKs */
static void tcp_dsack_seen(struct tcp_sock *tp)
{
tp->rx_opt.sack_ok |= 4;
@@ -1058,7 +1058,7 @@
*
* With D-SACK the lower bound is extended to cover sequence space below
* SND.UNA down to undo_marker, which is the last point of interest. Yet
- * again, DSACK block must not to go across snd_una (for the same reason as
+ * again, D-SACK block must not to go across snd_una (for the same reason as
* for the normal SACK blocks, explained above). But there all simplicity
* ends, TCP might receive valid D-SACKs below that. As long as they reside
* fully below undo_marker they do not affect behavior in anyway and can
@@ -1080,7 +1080,7 @@
if (!before(start_seq, tp->snd_nxt))
return 0;
- /* In outstanding window? ...This is valid exit for DSACKs too.
+ /* In outstanding window? ...This is valid exit for D-SACKs too.
* start_seq == snd_una is non-sensical (see comments above)
*/
if (after(start_seq, tp->snd_una))
@@ -1204,8 +1204,8 @@
* which may fail and creates some hassle (caller must handle error case
* returns).
*/
-int tcp_match_skb_to_sack(struct sock *sk, struct sk_buff *skb,
- u32 start_seq, u32 end_seq)
+static int tcp_match_skb_to_sack(struct sock *sk, struct sk_buff *skb,
+ u32 start_seq, u32 end_seq)
{
int in_sack, err;
unsigned int pkt_len;
@@ -1248,6 +1248,7 @@
int cached_fack_count;
int i;
int first_sack_index;
+ int force_one_sack;
if (!tp->sacked_out) {
if (WARN_ON(tp->fackets_out))
@@ -1272,18 +1273,18 @@
* if the only SACK change is the increase of the end_seq of
* the first block then only apply that SACK block
* and use retrans queue hinting otherwise slowpath */
- flag = 1;
+ force_one_sack = 1;
for (i = 0; i < num_sacks; i++) {
__be32 start_seq = sp[i].start_seq;
__be32 end_seq = sp[i].end_seq;
if (i == 0) {
if (tp->recv_sack_cache[i].start_seq != start_seq)
- flag = 0;
+ force_one_sack = 0;
} else {
if ((tp->recv_sack_cache[i].start_seq != start_seq) ||
(tp->recv_sack_cache[i].end_seq != end_seq))
- flag = 0;
+ force_one_sack = 0;
}
tp->recv_sack_cache[i].start_seq = start_seq;
tp->recv_sack_cache[i].end_seq = end_seq;
@@ -1295,7 +1296,7 @@
}
first_sack_index = 0;
- if (flag)
+ if (force_one_sack)
num_sacks = 1;
else {
int j;
@@ -1321,9 +1322,6 @@
}
}
- /* clear flag as used for different purpose in following code */
- flag = 0;
-
/* Use SACK fastpath hint if valid */
cached_skb = tp->fastpath_skb_hint;
cached_fack_count = tp->fastpath_cnt_hint;
@@ -1332,12 +1330,15 @@
cached_fack_count = 0;
}
- for (i=0; i<num_sacks; i++, sp++) {
+ for (i = 0; i < num_sacks; i++) {
struct sk_buff *skb;
__u32 start_seq = ntohl(sp->start_seq);
__u32 end_seq = ntohl(sp->end_seq);
int fack_count;
int dup_sack = (found_dup_sack && (i == first_sack_index));
+ int next_dup = (found_dup_sack && (i+1 == first_sack_index));
+
+ sp++;
if (!tcp_is_sackblock_valid(tp, dup_sack, start_seq, end_seq)) {
if (dup_sack) {
@@ -1363,7 +1364,7 @@
flag |= FLAG_DATA_LOST;
tcp_for_write_queue_from(skb, sk) {
- int in_sack;
+ int in_sack = 0;
u8 sacked;
if (skb == tcp_send_head(sk))
@@ -1382,7 +1383,23 @@
if (!before(TCP_SKB_CB(skb)->seq, end_seq))
break;
- in_sack = tcp_match_skb_to_sack(sk, skb, start_seq, end_seq);
+ dup_sack = (found_dup_sack && (i == first_sack_index));
+
+ /* Due to sorting DSACK may reside within this SACK block! */
+ if (next_dup) {
+ u32 dup_start = ntohl(sp->start_seq);
+ u32 dup_end = ntohl(sp->end_seq);
+
+ if (before(TCP_SKB_CB(skb)->seq, dup_end)) {
+ in_sack = tcp_match_skb_to_sack(sk, skb, dup_start, dup_end);
+ if (in_sack > 0)
+ dup_sack = 1;
+ }
+ }
+
+ /* DSACK info lost if out-of-mem, try SACK still */
+ if (in_sack <= 0)
+ in_sack = tcp_match_skb_to_sack(sk, skb, start_seq, end_seq);
if (in_sack < 0)
break;
@@ -1615,7 +1632,7 @@
!icsk->icsk_retransmits)) {
tp->prior_ssthresh = tcp_current_ssthresh(sk);
/* Our state is too optimistic in ssthresh() call because cwnd
- * is not reduced until tcp_enter_frto_loss() when previous FRTO
+ * is not reduced until tcp_enter_frto_loss() when previous F-RTO
* recovery has not yet completed. Pattern would be this: RTO,
* Cumulative ACK, RTO (2xRTO for the same segment does not end
* up here twice).
@@ -1801,7 +1818,7 @@
tcp_set_ca_state(sk, TCP_CA_Loss);
tp->high_seq = tp->snd_nxt;
TCP_ECN_queue_cwr(tp);
- /* Abort FRTO algorithm if one is in progress */
+ /* Abort F-RTO algorithm if one is in progress */
tp->frto_counter = 0;
}
@@ -1946,7 +1963,7 @@
struct tcp_sock *tp = tcp_sk(sk);
__u32 packets_out;
- /* Do not perform any recovery during FRTO algorithm */
+ /* Do not perform any recovery during F-RTO algorithm */
if (tp->frto_counter)
return 0;
@@ -2061,7 +2078,7 @@
if (!tcp_skb_timedout(sk, skb))
break;
- if (!(TCP_SKB_CB(skb)->sacked&TCPCB_TAGBITS)) {
+ if (!(TCP_SKB_CB(skb)->sacked & (TCPCB_SACKED_ACKED|TCPCB_LOST))) {
TCP_SKB_CB(skb)->sacked |= TCPCB_LOST;
tp->lost_out += tcp_skb_pcount(skb);
tcp_verify_retransmit_hint(tp, skb);
@@ -2962,7 +2979,7 @@
}
if (tp->frto_counter == 1) {
- /* Sending of the next skb must be allowed or no FRTO */
+ /* Sending of the next skb must be allowed or no F-RTO */
if (!tcp_send_head(sk) ||
after(TCP_SKB_CB(tcp_send_head(sk))->end_seq,
tp->snd_una + tp->snd_wnd)) {
@@ -3909,7 +3926,7 @@
while (before(start, end)) {
struct sk_buff *nskb;
- int header = skb_headroom(skb);
+ unsigned int header = skb_headroom(skb);
int copy = SKB_MAX_ORDER(header, 0);
/* Too big header? This can happen with IPv6. */
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 38cf73a..eec02b2 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -858,16 +858,16 @@
u8 *newkey, u8 newkeylen)
{
/* Add Key to the list */
- struct tcp4_md5sig_key *key;
+ struct tcp_md5sig_key *key;
struct tcp_sock *tp = tcp_sk(sk);
struct tcp4_md5sig_key *keys;
- key = (struct tcp4_md5sig_key *)tcp_v4_md5_do_lookup(sk, addr);
+ key = tcp_v4_md5_do_lookup(sk, addr);
if (key) {
/* Pre-existing entry - just update that one. */
- kfree(key->base.key);
- key->base.key = newkey;
- key->base.keylen = newkeylen;
+ kfree(key->key);
+ key->key = newkey;
+ key->keylen = newkeylen;
} else {
struct tcp_md5sig_info *md5sig;
@@ -1055,6 +1055,9 @@
bp->pad = 0;
bp->protocol = protocol;
bp->len = htons(tcplen);
+
+ sg_init_table(sg, 4);
+
sg_set_buf(&sg[block++], bp, sizeof(*bp));
nbytes += sizeof(*bp);
@@ -1080,6 +1083,8 @@
sg_set_buf(&sg[block++], key->key, key->keylen);
nbytes += key->keylen;
+ __sg_mark_end(&sg[block - 1]);
+
/* Now store the Hash into the packet */
err = crypto_hash_init(desc);
if (err)
diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c
index b49dedc..007304e 100644
--- a/net/ipv4/tcp_vegas.c
+++ b/net/ipv4/tcp_vegas.c
@@ -266,26 +266,25 @@
*/
diff = (old_wnd << V_PARAM_SHIFT) - target_cwnd;
- if (tp->snd_cwnd <= tp->snd_ssthresh) {
+ if (diff > gamma && tp->snd_ssthresh > 2 ) {
+ /* Going too fast. Time to slow down
+ * and switch to congestion avoidance.
+ */
+ tp->snd_ssthresh = 2;
+
+ /* Set cwnd to match the actual rate
+ * exactly:
+ * cwnd = (actual rate) * baseRTT
+ * Then we add 1 because the integer
+ * truncation robs us of full link
+ * utilization.
+ */
+ tp->snd_cwnd = min(tp->snd_cwnd,
+ (target_cwnd >>
+ V_PARAM_SHIFT)+1);
+
+ } else if (tp->snd_cwnd <= tp->snd_ssthresh) {
/* Slow start. */
- if (diff > gamma) {
- /* Going too fast. Time to slow down
- * and switch to congestion avoidance.
- */
- tp->snd_ssthresh = 2;
-
- /* Set cwnd to match the actual rate
- * exactly:
- * cwnd = (actual rate) * baseRTT
- * Then we add 1 because the integer
- * truncation robs us of full link
- * utilization.
- */
- tp->snd_cwnd = min(tp->snd_cwnd,
- (target_cwnd >>
- V_PARAM_SHIFT)+1);
-
- }
tcp_slow_start(tp);
} else {
/* Congestion avoidance. */
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 35d2b0e..4bc25b4 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1152,7 +1152,7 @@
return __udp4_lib_mcast_deliver(skb, uh, saddr, daddr, udptable);
sk = __udp4_lib_lookup(saddr, uh->source, daddr, uh->dest,
- skb->dev->ifindex, udptable );
+ inet_iif(skb), udptable);
if (sk != NULL) {
int ret = udp_queue_rcv_skb(sk, skb);
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 348bd8d..1bd8d81 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4288,8 +4288,4 @@
del_timer(&addr_chk_timer);
rtnl_unlock();
-
-#ifdef CONFIG_PROC_FS
- proc_net_remove(&init_net, "if_inet6");
-#endif
}
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 1b1caf3..ecbd388 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -162,7 +162,7 @@
BUG_TRAP(answer_prot->slab != NULL);
err = -ENOBUFS;
- sk = sk_alloc(net, PF_INET6, GFP_KERNEL, answer_prot, 1);
+ sk = sk_alloc(net, PF_INET6, GFP_KERNEL, answer_prot);
if (sk == NULL)
goto out;
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index 72a6598..7db66f1 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -29,7 +29,7 @@
#include <net/ip.h>
#include <net/xfrm.h>
#include <net/esp.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <linux/crypto.h>
#include <linux/kernel.h>
#include <linux/pfkeyv2.h>
@@ -109,7 +109,11 @@
if (!sg)
goto unlock;
}
- skb_to_sgvec(skb, sg, esph->enc_data+esp->conf.ivlen-skb->data, clen);
+ sg_init_table(sg, nfrags);
+ skb_to_sgvec(skb, sg,
+ esph->enc_data +
+ esp->conf.ivlen -
+ skb->data, clen);
err = crypto_blkcipher_encrypt(&desc, sg, sg, clen);
if (unlikely(sg != &esp->sgbuf[0]))
kfree(sg);
@@ -205,7 +209,10 @@
goto out;
}
}
- skb_to_sgvec(skb, sg, sizeof(*esph) + esp->conf.ivlen, elen);
+ sg_init_table(sg, nfrags);
+ skb_to_sgvec(skb, sg,
+ sizeof(*esph) + esp->conf.ivlen,
+ elen);
ret = crypto_blkcipher_decrypt(&desc, sg, sg, elen);
if (unlikely(sg != &esp->sgbuf[0]))
kfree(sg);
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 13565df..653fc0a 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -171,7 +171,7 @@
u32 mtu;
if (opt) {
- int head_room;
+ unsigned int head_room;
/* First: exthdrs may take lots of space (~8K for now)
MAX_HEADER is not enough.
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 2320cc2..5383b33 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -838,7 +838,7 @@
struct dst_entry *dst;
struct net_device *tdev;
int mtu;
- int max_headroom = sizeof(struct ipv6hdr);
+ unsigned int max_headroom = sizeof(struct ipv6hdr);
u8 proto;
int err = -1;
int pkt_len;
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 20cfc90..36f7dbf 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1670,7 +1670,7 @@
filp, buffer, lenp, ppos);
else if ((strcmp(ctl->procname, "retrans_time_ms") == 0) ||
- (strcmp(ctl->procname, "base_reacable_time_ms") == 0))
+ (strcmp(ctl->procname, "base_reachable_time_ms") == 0))
ret = proc_dointvec_ms_jiffies(ctl, write,
filp, buffer, lenp, ppos);
else
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 466657a..71433d2 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -430,7 +430,7 @@
struct rtable *rt; /* Route to the other host */
struct net_device *tdev; /* Device to other host */
struct iphdr *iph; /* Our new IP header */
- int max_headroom; /* The extra header space needed */
+ unsigned int max_headroom; /* The extra header space needed */
__be32 dst = tiph->daddr;
int mtu;
struct in6_addr *addr6;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 737b755..4b90328 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -59,6 +59,7 @@
#include <net/snmp.h>
#include <net/dsfield.h>
#include <net/timewait_sock.h>
+#include <net/netdma.h>
#include <asm/uaccess.h>
@@ -560,16 +561,16 @@
char *newkey, u8 newkeylen)
{
/* Add key to the list */
- struct tcp6_md5sig_key *key;
+ struct tcp_md5sig_key *key;
struct tcp_sock *tp = tcp_sk(sk);
struct tcp6_md5sig_key *keys;
- key = (struct tcp6_md5sig_key*) tcp_v6_md5_do_lookup(sk, peer);
+ key = tcp_v6_md5_do_lookup(sk, peer);
if (key) {
/* modify existing entry - just update that one */
- kfree(key->base.key);
- key->base.key = newkey;
- key->base.keylen = newkeylen;
+ kfree(key->key);
+ key->key = newkey;
+ key->keylen = newkeylen;
} else {
/* reallocate new list if current one is full. */
if (!tp->md5sig_info) {
@@ -757,6 +758,8 @@
bp->len = htonl(tcplen);
bp->protocol = htonl(protocol);
+ sg_init_table(sg, 4);
+
sg_set_buf(&sg[block++], bp, sizeof(*bp));
nbytes += sizeof(*bp);
@@ -778,6 +781,8 @@
sg_set_buf(&sg[block++], key->key, key->keylen);
nbytes += key->keylen;
+ __sg_mark_end(&sg[block - 1]);
+
/* Now store the hash into the packet */
err = crypto_hash_init(desc);
if (err) {
@@ -1728,6 +1733,8 @@
if (!sock_owned_by_user(sk)) {
#ifdef CONFIG_NET_DMA
struct tcp_sock *tp = tcp_sk(sk);
+ if (!tp->ucopy.dma_chan && tp->ucopy.pinned_list)
+ tp->ucopy.dma_chan = get_softnet_dma();
if (tp->ucopy.dma_chan)
ret = tcp_v6_do_rcv(sk, skb);
else
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 29b063d..a195a66 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -1381,7 +1381,7 @@
goto out;
rc = -ENOMEM;
- sk = sk_alloc(net, PF_IPX, GFP_KERNEL, &ipx_proto, 1);
+ sk = sk_alloc(net, PF_IPX, GFP_KERNEL, &ipx_proto);
if (!sk)
goto out;
#ifdef IPX_REFCNT_DEBUG
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index 0328ae2..48ce59a 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -1078,7 +1078,7 @@
}
/* Allocate networking socket */
- sk = sk_alloc(net, PF_IRDA, GFP_ATOMIC, &irda_proto, 1);
+ sk = sk_alloc(net, PF_IRDA, GFP_ATOMIC, &irda_proto);
if (sk == NULL)
return -ENOMEM;
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index 3d241e4..1120b15 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -77,7 +77,7 @@
#endif /* CONFIG_PROC_FS */
static struct tty_driver *driver;
-hashbin_t *ircomm_tty = NULL;
+static hashbin_t *ircomm_tty = NULL;
static const struct tty_operations ops = {
.open = ircomm_tty_open,
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
index 2f9f8dc..e0eab59 100644
--- a/net/irda/irnet/irnet_ppp.c
+++ b/net/irda/irnet/irnet_ppp.c
@@ -731,15 +731,25 @@
/* Get termios */
case TCGETS:
DEBUG(FS_INFO, "Get termios.\n");
+#ifndef TCGETS2
if(kernel_termios_to_user_termios((struct termios __user *)argp, &ap->termios))
break;
+#else
+ if(kernel_termios_to_user_termios_1((struct termios __user *)argp, &ap->termios))
+ break;
+#endif
err = 0;
break;
/* Set termios */
case TCSETSF:
DEBUG(FS_INFO, "Set termios.\n");
+#ifndef TCGETS2
if(user_termios_to_kernel_termios(&ap->termios, (struct termios __user *)argp))
break;
+#else
+ if(user_termios_to_kernel_termios_1(&ap->termios, (struct termios __user *)argp))
+ break;
+#endif
err = 0;
break;
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 43e01c8..aef6645 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -216,7 +216,7 @@
{
struct sock *sk;
- sk = sk_alloc(&init_net, PF_IUCV, prio, &iucv_proto, 1);
+ sk = sk_alloc(&init_net, PF_IUCV, prio, &iucv_proto);
if (!sk)
return NULL;
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 7969f8a..10c89d4 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -152,7 +152,7 @@
return -EPROTONOSUPPORT;
err = -ENOMEM;
- sk = sk_alloc(net, PF_KEY, GFP_KERNEL, &key_proto, 1);
+ sk = sk_alloc(net, PF_KEY, GFP_KERNEL, &key_proto);
if (sk == NULL)
goto out;
@@ -395,9 +395,9 @@
static inline int verify_sec_ctx_len(void *p)
{
struct sadb_x_sec_ctx *sec_ctx = (struct sadb_x_sec_ctx *)p;
- int len;
+ int len = sec_ctx->sadb_x_ctx_len;
- if (sec_ctx->sadb_x_ctx_len > PAGE_SIZE)
+ if (len > PAGE_SIZE)
return -EINVAL;
len = pfkey_sec_ctx_len(sec_ctx);
diff --git a/net/llc/llc_conn.c b/net/llc/llc_conn.c
index 8ebc276..5c0b484 100644
--- a/net/llc/llc_conn.c
+++ b/net/llc/llc_conn.c
@@ -869,7 +869,7 @@
*/
struct sock *llc_sk_alloc(struct net *net, int family, gfp_t priority, struct proto *prot)
{
- struct sock *sk = sk_alloc(net, family, priority, prot, 1);
+ struct sock *sk = sk_alloc(net, family, priority, prot);
if (!sk)
goto out;
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index f7ffeec..fda0e06 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -1184,7 +1184,7 @@
printk(KERN_DEBUG "%s: RX %sssocResp from %s (capab=0x%x "
"status=%d aid=%d)\n",
dev->name, reassoc ? "Rea" : "A", print_mac(mac, mgmt->sa),
- capab_info, status_code, aid & ~(BIT(15) | BIT(14)));
+ capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
if (status_code != WLAN_STATUS_SUCCESS) {
printk(KERN_DEBUG "%s: AP denied association (code=%d)\n",
@@ -2096,7 +2096,8 @@
{
int tmp, hidden_ssid;
- if (!memcmp(ifsta->ssid, ssid, ssid_len))
+ if (ssid_len == ifsta->ssid_len &&
+ !memcmp(ifsta->ssid, ssid, ssid_len))
return 1;
if (ifsta->flags & IEEE80211_STA_AUTO_BSSID_SEL)
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index d7a600a..21a9fcc 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -363,7 +363,7 @@
the tables, chains, rules.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_TARGET_SECMARK
tristate '"SECMARK" target support'
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 4d6171b..000c2fb 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -999,7 +999,7 @@
*vmalloced = 0;
size = *sizep = roundup(*sizep, PAGE_SIZE / sizeof(struct hlist_head));
- hash = (void*)__get_free_pages(GFP_KERNEL,
+ hash = (void*)__get_free_pages(GFP_KERNEL|__GFP_NOWARN,
get_order(sizeof(struct hlist_head)
* size));
if (!hash) {
diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c
index b6c844b..b3675bd 100644
--- a/net/netlabel/netlabel_domainhash.c
+++ b/net/netlabel/netlabel_domainhash.c
@@ -178,11 +178,9 @@
for (iter = 0; iter < hsh_tbl->size; iter++)
INIT_LIST_HEAD(&hsh_tbl->tbl[iter]);
- rcu_read_lock();
spin_lock(&netlbl_domhsh_lock);
rcu_assign_pointer(netlbl_domhsh, hsh_tbl);
spin_unlock(&netlbl_domhsh_lock);
- rcu_read_unlock();
return 0;
}
@@ -222,7 +220,6 @@
entry->valid = 1;
INIT_RCU_HEAD(&entry->rcu);
- ret_val = 0;
rcu_read_lock();
if (entry->domain != NULL) {
bkt = netlbl_domhsh_hash(entry->domain);
@@ -233,7 +230,7 @@
else
ret_val = -EEXIST;
spin_unlock(&netlbl_domhsh_lock);
- } else if (entry->domain == NULL) {
+ } else {
INIT_LIST_HEAD(&entry->list);
spin_lock(&netlbl_domhsh_def_lock);
if (rcu_dereference(netlbl_domhsh_def) == NULL)
@@ -241,9 +238,7 @@
else
ret_val = -EEXIST;
spin_unlock(&netlbl_domhsh_def_lock);
- } else
- ret_val = -EINVAL;
-
+ }
audit_buf = netlbl_audit_start_common(AUDIT_MAC_MAP_ADD, audit_info);
if (audit_buf != NULL) {
audit_log_format(audit_buf,
@@ -262,7 +257,6 @@
audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
audit_log_end(audit_buf);
}
-
rcu_read_unlock();
if (ret_val != 0) {
@@ -313,38 +307,30 @@
struct audit_buffer *audit_buf;
rcu_read_lock();
- if (domain != NULL)
- entry = netlbl_domhsh_search(domain, 0);
- else
- entry = netlbl_domhsh_search(domain, 1);
+ entry = netlbl_domhsh_search(domain, (domain != NULL ? 0 : 1));
if (entry == NULL)
goto remove_return;
switch (entry->type) {
- case NETLBL_NLTYPE_UNLABELED:
- break;
case NETLBL_NLTYPE_CIPSOV4:
- ret_val = cipso_v4_doi_domhsh_remove(entry->type_def.cipsov4,
- entry->domain);
- if (ret_val != 0)
- goto remove_return;
+ cipso_v4_doi_domhsh_remove(entry->type_def.cipsov4,
+ entry->domain);
break;
}
- ret_val = 0;
if (entry != rcu_dereference(netlbl_domhsh_def)) {
spin_lock(&netlbl_domhsh_lock);
if (entry->valid) {
entry->valid = 0;
list_del_rcu(&entry->list);
- } else
- ret_val = -ENOENT;
+ ret_val = 0;
+ }
spin_unlock(&netlbl_domhsh_lock);
} else {
spin_lock(&netlbl_domhsh_def_lock);
if (entry->valid) {
entry->valid = 0;
rcu_assign_pointer(netlbl_domhsh_def, NULL);
- } else
- ret_val = -ENOENT;
+ ret_val = 0;
+ }
spin_unlock(&netlbl_domhsh_def_lock);
}
@@ -357,11 +343,10 @@
audit_log_end(audit_buf);
}
- if (ret_val == 0)
- call_rcu(&entry->rcu, netlbl_domhsh_free_entry);
-
remove_return:
rcu_read_unlock();
+ if (ret_val == 0)
+ call_rcu(&entry->rcu, netlbl_domhsh_free_entry);
return ret_val;
}
diff --git a/net/netlabel/netlabel_mgmt.c b/net/netlabel/netlabel_mgmt.c
index 5315dac..5648337 100644
--- a/net/netlabel/netlabel_mgmt.c
+++ b/net/netlabel/netlabel_mgmt.c
@@ -85,11 +85,9 @@
*/
void netlbl_mgmt_protocount_inc(void)
{
- rcu_read_lock();
spin_lock(&netlabel_mgmt_protocount_lock);
netlabel_mgmt_protocount++;
spin_unlock(&netlabel_mgmt_protocount_lock);
- rcu_read_unlock();
}
/**
@@ -103,12 +101,10 @@
*/
void netlbl_mgmt_protocount_dec(void)
{
- rcu_read_lock();
spin_lock(&netlabel_mgmt_protocount_lock);
if (netlabel_mgmt_protocount > 0)
netlabel_mgmt_protocount--;
spin_unlock(&netlabel_mgmt_protocount_lock);
- rcu_read_unlock();
}
/**
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index 5c303c68a..3482924 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -84,12 +84,10 @@
struct audit_buffer *audit_buf;
u8 old_val;
- rcu_read_lock();
- old_val = netlabel_unlabel_acceptflg;
spin_lock(&netlabel_unlabel_acceptflg_lock);
+ old_val = netlabel_unlabel_acceptflg;
netlabel_unlabel_acceptflg = value;
spin_unlock(&netlabel_unlabel_acceptflg_lock);
- rcu_read_unlock();
audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_ALLOW,
audit_info);
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 98e313e..2601712 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -396,7 +396,7 @@
sock->ops = &netlink_ops;
- sk = sk_alloc(net, PF_NETLINK, GFP_KERNEL, &netlink_proto, 1);
+ sk = sk_alloc(net, PF_NETLINK, GFP_KERNEL, &netlink_proto);
if (!sk)
return -ENOMEM;
@@ -1565,7 +1565,11 @@
netlink_dump(sk);
sock_put(sk);
- return 0;
+
+ /* We successfully started a dump, by returning -EINTR we
+ * signal not to send ACK even if it was requested.
+ */
+ return -EINTR;
}
void netlink_ack(struct sk_buff *in_skb, struct nlmsghdr *nlh, int err)
@@ -1619,17 +1623,21 @@
/* Only requests are handled by the kernel */
if (!(nlh->nlmsg_flags & NLM_F_REQUEST))
- goto skip;
+ goto ack;
/* Skip control messages */
if (nlh->nlmsg_type < NLMSG_MIN_TYPE)
- goto skip;
+ goto ack;
err = cb(skb, nlh);
-skip:
+ if (err == -EINTR)
+ goto skip;
+
+ack:
if (nlh->nlmsg_flags & NLM_F_ACK || err)
netlink_ack(skb, nlh, err);
+skip:
msglen = NLMSG_ALIGN(nlh->nlmsg_len);
if (msglen > skb->len)
msglen = skb->len;
@@ -1880,7 +1888,7 @@
#endif
}
-static struct pernet_operations __net_initdata netlink_net_ops = {
+static struct pernet_operations netlink_net_ops = {
.init = netlink_net_init,
.exit = netlink_net_exit,
};
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 3a4d479..972250c9 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -423,7 +423,8 @@
if (sock->type != SOCK_SEQPACKET || protocol != 0)
return -ESOCKTNOSUPPORT;
- if ((sk = sk_alloc(net, PF_NETROM, GFP_ATOMIC, &nr_proto, 1)) == NULL)
+ sk = sk_alloc(net, PF_NETROM, GFP_ATOMIC, &nr_proto);
+ if (sk == NULL)
return -ENOMEM;
nr = nr_sk(sk);
@@ -465,7 +466,8 @@
if (osk->sk_type != SOCK_SEQPACKET)
return NULL;
- if ((sk = sk_alloc(osk->sk_net, PF_NETROM, GFP_ATOMIC, osk->sk_prot, 1)) == NULL)
+ sk = sk_alloc(osk->sk_net, PF_NETROM, GFP_ATOMIC, osk->sk_prot);
+ if (sk == NULL)
return NULL;
nr = nr_sk(sk);
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index d093650..4cb2dfb 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -995,7 +995,7 @@
sock->state = SS_UNCONNECTED;
err = -ENOBUFS;
- sk = sk_alloc(net, PF_PACKET, GFP_KERNEL, &packet_proto, 1);
+ sk = sk_alloc(net, PF_PACKET, GFP_KERNEL, &packet_proto);
if (sk == NULL)
goto out;
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 509defe..ed2d65c 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -513,7 +513,8 @@
if (sock->type != SOCK_SEQPACKET || protocol != 0)
return -ESOCKTNOSUPPORT;
- if ((sk = sk_alloc(net, PF_ROSE, GFP_ATOMIC, &rose_proto, 1)) == NULL)
+ sk = sk_alloc(net, PF_ROSE, GFP_ATOMIC, &rose_proto);
+ if (sk == NULL)
return -ENOMEM;
rose = rose_sk(sk);
@@ -551,7 +552,8 @@
if (osk->sk_type != SOCK_SEQPACKET)
return NULL;
- if ((sk = sk_alloc(osk->sk_net, PF_ROSE, GFP_ATOMIC, &rose_proto, 1)) == NULL)
+ sk = sk_alloc(osk->sk_net, PF_ROSE, GFP_ATOMIC, &rose_proto);
+ if (sk == NULL)
return NULL;
rose = rose_sk(sk);
diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c
index c680017..d638945 100644
--- a/net/rxrpc/af_rxrpc.c
+++ b/net/rxrpc/af_rxrpc.c
@@ -627,7 +627,7 @@
sock->ops = &rxrpc_rpc_ops;
sock->state = SS_UNCONNECTED;
- sk = sk_alloc(net, PF_RXRPC, GFP_KERNEL, &rxrpc_proto, 1);
+ sk = sk_alloc(net, PF_RXRPC, GFP_KERNEL, &rxrpc_proto);
if (!sk)
return -ENOMEM;
diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c
index ac3cabd..c387cf6 100644
--- a/net/rxrpc/rxkad.c
+++ b/net/rxrpc/rxkad.c
@@ -135,9 +135,8 @@
tmpbuf.x[2] = 0;
tmpbuf.x[3] = htonl(conn->security_ix);
- memset(sg, 0, sizeof(sg));
- sg_set_buf(&sg[0], &tmpbuf, sizeof(tmpbuf));
- sg_set_buf(&sg[1], &tmpbuf, sizeof(tmpbuf));
+ sg_init_one(&sg[0], &tmpbuf, sizeof(tmpbuf));
+ sg_init_one(&sg[1], &tmpbuf, sizeof(tmpbuf));
crypto_blkcipher_encrypt_iv(&desc, &sg[0], &sg[1], sizeof(tmpbuf));
memcpy(&conn->csum_iv, &tmpbuf.x[2], sizeof(conn->csum_iv));
@@ -180,9 +179,8 @@
desc.info = iv.x;
desc.flags = 0;
- memset(sg, 0, sizeof(sg));
- sg_set_buf(&sg[0], &tmpbuf, sizeof(tmpbuf));
- sg_set_buf(&sg[1], &tmpbuf, sizeof(tmpbuf));
+ sg_init_one(&sg[0], &tmpbuf, sizeof(tmpbuf));
+ sg_init_one(&sg[1], &tmpbuf, sizeof(tmpbuf));
crypto_blkcipher_encrypt_iv(&desc, &sg[0], &sg[1], sizeof(tmpbuf));
memcpy(sechdr, &tmpbuf, sizeof(tmpbuf));
@@ -227,9 +225,8 @@
desc.info = iv.x;
desc.flags = 0;
- memset(sg, 0, sizeof(sg[0]) * 2);
- sg_set_buf(&sg[0], sechdr, sizeof(rxkhdr));
- sg_set_buf(&sg[1], &rxkhdr, sizeof(rxkhdr));
+ sg_init_one(&sg[0], sechdr, sizeof(rxkhdr));
+ sg_init_one(&sg[1], &rxkhdr, sizeof(rxkhdr));
crypto_blkcipher_encrypt_iv(&desc, &sg[0], &sg[1], sizeof(rxkhdr));
/* we want to encrypt the skbuff in-place */
@@ -240,6 +237,7 @@
len = data_size + call->conn->size_align - 1;
len &= ~(call->conn->size_align - 1);
+ sg_init_table(sg, nsg);
skb_to_sgvec(skb, sg, 0, len);
crypto_blkcipher_encrypt_iv(&desc, sg, sg, len);
@@ -290,9 +288,8 @@
tmpbuf.x[0] = sp->hdr.callNumber;
tmpbuf.x[1] = x;
- memset(&sg, 0, sizeof(sg));
- sg_set_buf(&sg[0], &tmpbuf, sizeof(tmpbuf));
- sg_set_buf(&sg[1], &tmpbuf, sizeof(tmpbuf));
+ sg_init_one(&sg[0], &tmpbuf, sizeof(tmpbuf));
+ sg_init_one(&sg[1], &tmpbuf, sizeof(tmpbuf));
crypto_blkcipher_encrypt_iv(&desc, &sg[0], &sg[1], sizeof(tmpbuf));
x = ntohl(tmpbuf.x[1]);
@@ -332,19 +329,22 @@
struct rxrpc_skb_priv *sp;
struct blkcipher_desc desc;
struct rxrpc_crypt iv;
- struct scatterlist sg[2];
+ struct scatterlist sg[16];
struct sk_buff *trailer;
u32 data_size, buf;
u16 check;
+ int nsg;
_enter("");
sp = rxrpc_skb(skb);
/* we want to decrypt the skbuff in-place */
- if (skb_cow_data(skb, 0, &trailer) < 0)
+ nsg = skb_cow_data(skb, 0, &trailer);
+ if (nsg < 0 || nsg > 16)
goto nomem;
+ sg_init_table(sg, nsg);
skb_to_sgvec(skb, sg, 0, 8);
/* start the decryption afresh */
@@ -426,6 +426,7 @@
goto nomem;
}
+ sg_init_table(sg, nsg);
skb_to_sgvec(skb, sg, 0, skb->len);
/* decrypt from the session key */
@@ -521,9 +522,8 @@
tmpbuf.x[0] = call->call_id;
tmpbuf.x[1] = x;
- memset(&sg, 0, sizeof(sg));
- sg_set_buf(&sg[0], &tmpbuf, sizeof(tmpbuf));
- sg_set_buf(&sg[1], &tmpbuf, sizeof(tmpbuf));
+ sg_init_one(&sg[0], &tmpbuf, sizeof(tmpbuf));
+ sg_init_one(&sg[1], &tmpbuf, sizeof(tmpbuf));
crypto_blkcipher_encrypt_iv(&desc, &sg[0], &sg[1], sizeof(tmpbuf));
x = ntohl(tmpbuf.x[1]);
@@ -690,16 +690,20 @@
static void rxkad_sg_set_buf2(struct scatterlist sg[2],
void *buf, size_t buflen)
{
+ int nsg = 1;
- memset(sg, 0, sizeof(sg));
+ sg_init_table(sg, 2);
sg_set_buf(&sg[0], buf, buflen);
if (sg[0].offset + buflen > PAGE_SIZE) {
/* the buffer was split over two pages */
sg[0].length = PAGE_SIZE - sg[0].offset;
sg_set_buf(&sg[1], buf + sg[0].length, buflen - sg[0].length);
+ nsg++;
}
+ __sg_mark_end(&sg[nsg - 1]);
+
ASSERTCMP(sg[0].length + sg[1].length, ==, buflen);
}
@@ -712,7 +716,7 @@
{
struct blkcipher_desc desc;
struct rxrpc_crypt iv;
- struct scatterlist ssg[2], dsg[2];
+ struct scatterlist sg[2];
/* continue encrypting from where we left off */
memcpy(&iv, s2->session_key, sizeof(iv));
@@ -720,9 +724,8 @@
desc.info = iv.x;
desc.flags = 0;
- rxkad_sg_set_buf2(ssg, &resp->encrypted, sizeof(resp->encrypted));
- memcpy(dsg, ssg, sizeof(dsg));
- crypto_blkcipher_encrypt_iv(&desc, dsg, ssg, sizeof(resp->encrypted));
+ rxkad_sg_set_buf2(sg, &resp->encrypted, sizeof(resp->encrypted));
+ crypto_blkcipher_encrypt_iv(&desc, sg, sg, sizeof(resp->encrypted));
}
/*
@@ -817,7 +820,7 @@
{
struct blkcipher_desc desc;
struct rxrpc_crypt iv, key;
- struct scatterlist ssg[1], dsg[1];
+ struct scatterlist sg[1];
struct in_addr addr;
unsigned life;
time_t issue, now;
@@ -850,9 +853,8 @@
desc.info = iv.x;
desc.flags = 0;
- sg_init_one(&ssg[0], ticket, ticket_len);
- memcpy(dsg, ssg, sizeof(dsg));
- crypto_blkcipher_decrypt_iv(&desc, dsg, ssg, ticket_len);
+ sg_init_one(&sg[0], ticket, ticket_len);
+ crypto_blkcipher_decrypt_iv(&desc, sg, sg, ticket_len);
p = ticket;
end = p + ticket_len;
@@ -961,7 +963,7 @@
const struct rxrpc_crypt *session_key)
{
struct blkcipher_desc desc;
- struct scatterlist ssg[2], dsg[2];
+ struct scatterlist sg[2];
struct rxrpc_crypt iv;
_enter(",,%08x%08x",
@@ -979,9 +981,8 @@
desc.info = iv.x;
desc.flags = 0;
- rxkad_sg_set_buf2(ssg, &resp->encrypted, sizeof(resp->encrypted));
- memcpy(dsg, ssg, sizeof(dsg));
- crypto_blkcipher_decrypt_iv(&desc, dsg, ssg, sizeof(resp->encrypted));
+ rxkad_sg_set_buf2(sg, &resp->encrypted, sizeof(resp->encrypted));
+ crypto_blkcipher_decrypt_iv(&desc, sg, sg, sizeof(resp->encrypted));
mutex_unlock(&rxkad_ci_mutex);
_leave("");
diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
index fd7bca4..c3fde91 100644
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -166,7 +166,7 @@
return TC_ACT_SHOT;
}
- skb2 = skb_clone(skb, GFP_ATOMIC);
+ skb2 = skb_act_clone(skb, GFP_ATOMIC);
if (skb2 == NULL)
goto bad_mirred;
if (m->tcfm_eaction != TCA_EGRESS_MIRROR &&
diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c
index abd82fc..de89409 100644
--- a/net/sched/sch_prio.c
+++ b/net/sched/sch_prio.c
@@ -136,7 +136,7 @@
* pulling an skb. This way we avoid excessive requeues
* for slower queues.
*/
- if (!netif_subqueue_stopped(sch->dev, (q->mq ? prio : 0))) {
+ if (!__netif_subqueue_stopped(sch->dev, (q->mq ? prio : 0))) {
qdisc = q->queues[prio];
skb = qdisc->dequeue(qdisc);
if (skb) {
@@ -165,7 +165,7 @@
* for slower queues. If the queue is stopped, try the
* next queue.
*/
- if (!netif_subqueue_stopped(sch->dev,
+ if (!__netif_subqueue_stopped(sch->dev,
(q->mq ? q->curband : 0))) {
qdisc = q->queues[q->curband];
skb = qdisc->dequeue(qdisc);
diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index cbd64b2..6d5fa6b 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -107,7 +107,7 @@
}
/* Free the shared key stucture */
-void sctp_auth_shkey_free(struct sctp_shared_key *sh_key)
+static void sctp_auth_shkey_free(struct sctp_shared_key *sh_key)
{
BUG_ON(!list_empty(&sh_key->key_list));
sctp_auth_key_put(sh_key->key);
@@ -220,7 +220,7 @@
/* Make a key vector based on our local parameters */
-struct sctp_auth_bytes *sctp_auth_make_local_vector(
+static struct sctp_auth_bytes *sctp_auth_make_local_vector(
const struct sctp_association *asoc,
gfp_t gfp)
{
@@ -232,7 +232,7 @@
}
/* Make a key vector based on peer's parameters */
-struct sctp_auth_bytes *sctp_auth_make_peer_vector(
+static struct sctp_auth_bytes *sctp_auth_make_peer_vector(
const struct sctp_association *asoc,
gfp_t gfp)
{
@@ -556,7 +556,7 @@
return &sctp_hmac_list[id];
}
-static int __sctp_auth_find_hmacid(__u16 *hmacs, int n_elts, __u16 hmac_id)
+static int __sctp_auth_find_hmacid(__be16 *hmacs, int n_elts, __be16 hmac_id)
{
int found = 0;
int i;
@@ -573,7 +573,7 @@
/* See if the HMAC_ID is one that we claim as supported */
int sctp_auth_asoc_verify_hmac_id(const struct sctp_association *asoc,
- __u16 hmac_id)
+ __be16 hmac_id)
{
struct sctp_hmac_algo_param *hmacs;
__u16 n_elt;
@@ -726,10 +726,7 @@
/* set up scatter list */
end = skb_tail_pointer(skb);
- sg_init_table(&sg, 1);
- sg_set_page(&sg, virt_to_page(auth));
- sg.offset = (unsigned long)(auth) % PAGE_SIZE;
- sg.length = end - (unsigned char *)auth;
+ sg_init_one(&sg, auth, end - (unsigned char *)auth);
desc.tfm = asoc->ep->auth_hmacs[hmac_id];
desc.flags = 0;
diff --git a/net/sctp/crc32c.c b/net/sctp/crc32c.c
index 59cf7b0..181edab 100644
--- a/net/sctp/crc32c.c
+++ b/net/sctp/crc32c.c
@@ -170,6 +170,7 @@
return crc32;
}
+#if 0
__u32 sctp_update_copy_cksum(__u8 *to, __u8 *from, __u16 length, __u32 crc32)
{
__u32 i;
@@ -186,6 +187,7 @@
return crc32;
}
+#endif /* 0 */
__u32 sctp_end_cksum(__u32 crc32)
{
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index eb4deaf..7f31ff638 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -631,7 +631,7 @@
struct ipv6_pinfo *newnp, *np = inet6_sk(sk);
struct sctp6_sock *newsctp6sk;
- newsk = sk_alloc(sk->sk_net, PF_INET6, GFP_KERNEL, sk->sk_prot, 1);
+ newsk = sk_alloc(sk->sk_net, PF_INET6, GFP_KERNEL, sk->sk_prot);
if (!newsk)
goto out;
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index f5cd96f..40c1a47 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -552,7 +552,8 @@
{
struct inet_sock *inet = inet_sk(sk);
struct inet_sock *newinet;
- struct sock *newsk = sk_alloc(sk->sk_net, PF_INET, GFP_KERNEL, sk->sk_prot, 1);
+ struct sock *newsk = sk_alloc(sk->sk_net, PF_INET, GFP_KERNEL,
+ sk->sk_prot);
if (!newsk)
goto out;
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 658476c..c377e4e 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1513,10 +1513,7 @@
struct hash_desc desc;
/* Sign the message. */
- sg_init_table(&sg, 1);
- sg_set_page(&sg, virt_to_page(&cookie->c));
- sg.offset = (unsigned long)(&cookie->c) % PAGE_SIZE;
- sg.length = bodysize;
+ sg_init_one(&sg, &cookie->c, bodysize);
keylen = SCTP_SECRET_SIZE;
key = (char *)ep->secret_key[ep->current_key];
desc.tfm = sctp_sk(ep->base.sk)->hmac;
@@ -1586,10 +1583,7 @@
/* Check the signature. */
keylen = SCTP_SECRET_SIZE;
- sg_init_table(&sg, 1);
- sg_set_page(&sg, virt_to_page(bear_cookie));
- sg.offset = (unsigned long)(bear_cookie) % PAGE_SIZE;
- sg.length = bodysize;
+ sg_init_one(&sg, bear_cookie, bodysize);
key = (char *)ep->secret_key[ep->current_key];
desc.tfm = sctp_sk(ep->base.sk)->hmac;
desc.flags = 0;
diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c
index b937095..4be92d0 100644
--- a/net/sctp/ulpqueue.c
+++ b/net/sctp/ulpqueue.c
@@ -908,8 +908,8 @@
return;
}
-/* Renege 'needed' bytes from the ordering queue. */
-static __u16 sctp_ulpq_renege_order(struct sctp_ulpq *ulpq, __u16 needed)
+static __u16 sctp_ulpq_renege_list(struct sctp_ulpq *ulpq,
+ struct sk_buff_head *list, __u16 needed)
{
__u16 freed = 0;
__u32 tsn;
@@ -919,7 +919,7 @@
tsnmap = &ulpq->asoc->peer.tsn_map;
- while ((skb = __skb_dequeue_tail(&ulpq->lobby)) != NULL) {
+ while ((skb = __skb_dequeue_tail(list)) != NULL) {
freed += skb_headlen(skb);
event = sctp_skb2event(skb);
tsn = event->tsn;
@@ -933,30 +933,16 @@
return freed;
}
+/* Renege 'needed' bytes from the ordering queue. */
+static __u16 sctp_ulpq_renege_order(struct sctp_ulpq *ulpq, __u16 needed)
+{
+ return sctp_ulpq_renege_list(ulpq, &ulpq->lobby, needed);
+}
+
/* Renege 'needed' bytes from the reassembly queue. */
static __u16 sctp_ulpq_renege_frags(struct sctp_ulpq *ulpq, __u16 needed)
{
- __u16 freed = 0;
- __u32 tsn;
- struct sk_buff *skb;
- struct sctp_ulpevent *event;
- struct sctp_tsnmap *tsnmap;
-
- tsnmap = &ulpq->asoc->peer.tsn_map;
-
- /* Walk backwards through the list, reneges the newest tsns. */
- while ((skb = __skb_dequeue_tail(&ulpq->reasm)) != NULL) {
- freed += skb_headlen(skb);
- event = sctp_skb2event(skb);
- tsn = event->tsn;
-
- sctp_ulpevent_free(event);
- sctp_tsnmap_renege(tsnmap, tsn);
- if (freed >= needed)
- return freed;
- }
-
- return freed;
+ return sctp_ulpq_renege_list(ulpq, &ulpq->reasm, needed);
}
/* Partial deliver the first message as there is pressure on rwnd. */
diff --git a/net/socket.c b/net/socket.c
index 540013e..5d879fd 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1250,11 +1250,14 @@
goto out_release_both;
fd1 = sock_alloc_fd(&newfile1);
- if (unlikely(fd1 < 0))
+ if (unlikely(fd1 < 0)) {
+ err = fd1;
goto out_release_both;
+ }
fd2 = sock_alloc_fd(&newfile2);
if (unlikely(fd2 < 0)) {
+ err = fd2;
put_filp(newfile1);
put_unused_fd(fd1);
goto out_release_both;
diff --git a/net/sunrpc/auth_gss/gss_krb5_crypto.c b/net/sunrpc/auth_gss/gss_krb5_crypto.c
index 32be431..ab7cbd6 100644
--- a/net/sunrpc/auth_gss/gss_krb5_crypto.c
+++ b/net/sunrpc/auth_gss/gss_krb5_crypto.c
@@ -75,7 +75,7 @@
memcpy(local_iv, iv, crypto_blkcipher_ivsize(tfm));
memcpy(out, in, length);
- sg_set_buf(sg, out, length);
+ sg_init_one(sg, out, length);
ret = crypto_blkcipher_encrypt_iv(&desc, sg, sg, length);
out:
@@ -110,7 +110,7 @@
memcpy(local_iv,iv, crypto_blkcipher_ivsize(tfm));
memcpy(out, in, length);
- sg_set_buf(sg, out, length);
+ sg_init_one(sg, out, length);
ret = crypto_blkcipher_decrypt_iv(&desc, sg, sg, length);
out:
@@ -146,7 +146,7 @@
err = crypto_hash_init(&desc);
if (err)
goto out;
- sg_set_buf(sg, header, hdrlen);
+ sg_init_one(sg, header, hdrlen);
err = crypto_hash_update(&desc, sg, hdrlen);
if (err)
goto out;
@@ -188,8 +188,6 @@
/* Worst case is 4 fragments: head, end of page 1, start
* of page 2, tail. Anything more is a bug. */
BUG_ON(desc->fragno > 3);
- desc->infrags[desc->fragno] = *sg;
- desc->outfrags[desc->fragno] = *sg;
page_pos = desc->pos - outbuf->head[0].iov_len;
if (page_pos >= 0 && page_pos < outbuf->page_len) {
@@ -199,7 +197,10 @@
} else {
in_page = sg_page(sg);
}
- sg_set_page(&desc->infrags[desc->fragno], in_page);
+ sg_set_page(&desc->infrags[desc->fragno], in_page, sg->length,
+ sg->offset);
+ sg_set_page(&desc->outfrags[desc->fragno], sg_page(sg), sg->length,
+ sg->offset);
desc->fragno++;
desc->fraglen += sg->length;
desc->pos += sg->length;
@@ -210,16 +211,22 @@
if (thislen == 0)
return 0;
+ __sg_mark_end(&desc->infrags[desc->fragno - 1]);
+ __sg_mark_end(&desc->outfrags[desc->fragno - 1]);
+
ret = crypto_blkcipher_encrypt_iv(&desc->desc, desc->outfrags,
desc->infrags, thislen);
if (ret)
return ret;
+
+ sg_init_table(desc->infrags, 4);
+ sg_init_table(desc->outfrags, 4);
+
if (fraglen) {
- sg_set_page(&desc->outfrags[0], sg_page(sg));
- desc->outfrags[0].offset = sg->offset + sg->length - fraglen;
- desc->outfrags[0].length = fraglen;
+ sg_set_page(&desc->outfrags[0], sg_page(sg), fraglen,
+ sg->offset + sg->length - fraglen);
desc->infrags[0] = desc->outfrags[0];
- sg_set_page(&desc->infrags[0], in_page);
+ sg_assign_page(&desc->infrags[0], in_page);
desc->fragno = 1;
desc->fraglen = fraglen;
} else {
@@ -248,6 +255,9 @@
desc.fragno = 0;
desc.fraglen = 0;
+ sg_init_table(desc.infrags, 4);
+ sg_init_table(desc.outfrags, 4);
+
ret = xdr_process_buf(buf, offset, buf->len - offset, encryptor, &desc);
return ret;
}
@@ -272,7 +282,8 @@
/* Worst case is 4 fragments: head, end of page 1, start
* of page 2, tail. Anything more is a bug. */
BUG_ON(desc->fragno > 3);
- desc->frags[desc->fragno] = *sg;
+ sg_set_page(&desc->frags[desc->fragno], sg_page(sg), sg->length,
+ sg->offset);
desc->fragno++;
desc->fraglen += sg->length;
@@ -282,14 +293,18 @@
if (thislen == 0)
return 0;
+ __sg_mark_end(&desc->frags[desc->fragno - 1]);
+
ret = crypto_blkcipher_decrypt_iv(&desc->desc, desc->frags,
desc->frags, thislen);
if (ret)
return ret;
+
+ sg_init_table(desc->frags, 4);
+
if (fraglen) {
- sg_set_page(&desc->frags[0], sg_page(sg));
- desc->frags[0].offset = sg->offset + sg->length - fraglen;
- desc->frags[0].length = fraglen;
+ sg_set_page(&desc->frags[0], sg_page(sg), fraglen,
+ sg->offset + sg->length - fraglen);
desc->fragno = 1;
desc->fraglen = fraglen;
} else {
@@ -314,6 +329,9 @@
desc.desc.flags = 0;
desc.fragno = 0;
desc.fraglen = 0;
+
+ sg_init_table(desc.frags, 4);
+
return xdr_process_buf(buf, offset, buf->len - offset, decryptor, &desc);
}
diff --git a/net/sunrpc/auth_gss/gss_spkm3_seal.c b/net/sunrpc/auth_gss/gss_spkm3_seal.c
index d158635..abf17ce 100644
--- a/net/sunrpc/auth_gss/gss_spkm3_seal.c
+++ b/net/sunrpc/auth_gss/gss_spkm3_seal.c
@@ -173,7 +173,7 @@
if (err)
goto out;
- sg_set_buf(sg, header, hdrlen);
+ sg_init_one(sg, header, hdrlen);
crypto_hash_update(&desc, sg, sg->length);
xdr_process_buf(body, body_offset, body->len - body_offset,
diff --git a/net/sunrpc/sysctl.c b/net/sunrpc/sysctl.c
index 864b541b..2be714e 100644
--- a/net/sunrpc/sysctl.c
+++ b/net/sunrpc/sysctl.c
@@ -87,9 +87,8 @@
left--, s++;
*(unsigned int *) table->data = value;
/* Display the RPC tasks on writing to rpc_debug */
- if (table->ctl_name == CTL_RPCDEBUG) {
+ if (strcmp(table->procname, "rpc_debug") == 0)
rpc_show_tasks();
- }
} else {
if (!access_ok(VERIFY_WRITE, buffer, left))
return -EFAULT;
diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c
index 3d1f7cd..fdc5e6d 100644
--- a/net/sunrpc/xdr.c
+++ b/net/sunrpc/xdr.c
@@ -1030,6 +1030,8 @@
unsigned page_len, thislen, page_offset;
struct scatterlist sg[1];
+ sg_init_table(sg, 1);
+
if (offset >= buf->head[0].iov_len) {
offset -= buf->head[0].iov_len;
} else {
@@ -1059,9 +1061,7 @@
do {
if (thislen > page_len)
thislen = page_len;
- sg_set_page(sg, buf->pages[i]);
- sg->offset = page_offset;
- sg->length = thislen;
+ sg_set_page(sg, buf->pages[i], thislen, page_offset);
ret = actor(sg, data);
if (ret)
goto out;
diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c
index 12db635..9e11ce7 100644
--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -181,7 +181,7 @@
struct rpcrdma_read_chunk *cur_rchunk = NULL;
struct rpcrdma_write_array *warray = NULL;
struct rpcrdma_write_chunk *cur_wchunk = NULL;
- u32 *iptr = headerp->rm_body.rm_chunks;
+ __be32 *iptr = headerp->rm_body.rm_chunks;
if (type == rpcrdma_readch || type == rpcrdma_areadch) {
/* a read chunk - server will RDMA Read our memory */
@@ -217,25 +217,25 @@
cur_rchunk->rc_target.rs_handle = htonl(seg->mr_rkey);
cur_rchunk->rc_target.rs_length = htonl(seg->mr_len);
xdr_encode_hyper(
- (u32 *)&cur_rchunk->rc_target.rs_offset,
+ (__be32 *)&cur_rchunk->rc_target.rs_offset,
seg->mr_base);
dprintk("RPC: %s: read chunk "
"elem %d@0x%llx:0x%x pos %d (%s)\n", __func__,
- seg->mr_len, seg->mr_base, seg->mr_rkey, pos,
- n < nsegs ? "more" : "last");
+ seg->mr_len, (unsigned long long)seg->mr_base,
+ seg->mr_rkey, pos, n < nsegs ? "more" : "last");
cur_rchunk++;
r_xprt->rx_stats.read_chunk_count++;
} else { /* write/reply */
cur_wchunk->wc_target.rs_handle = htonl(seg->mr_rkey);
cur_wchunk->wc_target.rs_length = htonl(seg->mr_len);
xdr_encode_hyper(
- (u32 *)&cur_wchunk->wc_target.rs_offset,
+ (__be32 *)&cur_wchunk->wc_target.rs_offset,
seg->mr_base);
dprintk("RPC: %s: %s chunk "
"elem %d@0x%llx:0x%x (%s)\n", __func__,
(type == rpcrdma_replych) ? "reply" : "write",
- seg->mr_len, seg->mr_base, seg->mr_rkey,
- n < nsegs ? "more" : "last");
+ seg->mr_len, (unsigned long long)seg->mr_base,
+ seg->mr_rkey, n < nsegs ? "more" : "last");
cur_wchunk++;
if (type == rpcrdma_replych)
r_xprt->rx_stats.reply_chunk_count++;
@@ -257,14 +257,14 @@
* finish off header. If write, marshal discrim and nchunks.
*/
if (cur_rchunk) {
- iptr = (u32 *) cur_rchunk;
+ iptr = (__be32 *) cur_rchunk;
*iptr++ = xdr_zero; /* finish the read chunk list */
*iptr++ = xdr_zero; /* encode a NULL write chunk list */
*iptr++ = xdr_zero; /* encode a NULL reply chunk */
} else {
warray->wc_discrim = xdr_one;
warray->wc_nchunks = htonl(nchunks);
- iptr = (u32 *) cur_wchunk;
+ iptr = (__be32 *) cur_wchunk;
if (type == rpcrdma_writech) {
*iptr++ = xdr_zero; /* finish the write chunk list */
*iptr++ = xdr_zero; /* encode a NULL reply chunk */
@@ -559,7 +559,7 @@
* RDMA'd by server. See map at rpcrdma_create_chunks()! :-)
*/
static int
-rpcrdma_count_chunks(struct rpcrdma_rep *rep, int max, int wrchunk, u32 **iptrp)
+rpcrdma_count_chunks(struct rpcrdma_rep *rep, int max, int wrchunk, __be32 **iptrp)
{
unsigned int i, total_len;
struct rpcrdma_write_chunk *cur_wchunk;
@@ -573,11 +573,11 @@
struct rpcrdma_segment *seg = &cur_wchunk->wc_target;
ifdebug(FACILITY) {
u64 off;
- xdr_decode_hyper((u32 *)&seg->rs_offset, &off);
+ xdr_decode_hyper((__be32 *)&seg->rs_offset, &off);
dprintk("RPC: %s: chunk %d@0x%llx:0x%x\n",
__func__,
ntohl(seg->rs_length),
- off,
+ (unsigned long long)off,
ntohl(seg->rs_handle));
}
total_len += ntohl(seg->rs_length);
@@ -585,7 +585,7 @@
}
/* check and adjust for properly terminated write chunk */
if (wrchunk) {
- u32 *w = (u32 *) cur_wchunk;
+ __be32 *w = (__be32 *) cur_wchunk;
if (*w++ != xdr_zero)
return -1;
cur_wchunk = (struct rpcrdma_write_chunk *) w;
@@ -593,7 +593,7 @@
if ((char *) cur_wchunk > rep->rr_base + rep->rr_len)
return -1;
- *iptrp = (u32 *) cur_wchunk;
+ *iptrp = (__be32 *) cur_wchunk;
return total_len;
}
@@ -721,7 +721,7 @@
struct rpc_rqst *rqst;
struct rpc_xprt *xprt = rep->rr_xprt;
struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
- u32 *iptr;
+ __be32 *iptr;
int i, rdmalen, status;
/* Check status. If bad, signal disconnect and return rep to pool */
@@ -801,7 +801,7 @@
r_xprt->rx_stats.total_rdma_reply += rdmalen;
} else {
/* else ordinary inline */
- iptr = (u32 *)((unsigned char *)headerp + 28);
+ iptr = (__be32 *)((unsigned char *)headerp + 28);
rep->rr_len -= 28; /*sizeof *headerp;*/
status = rep->rr_len;
}
@@ -816,7 +816,7 @@
headerp->rm_body.rm_chunks[2] != xdr_one ||
req->rl_nchunks == 0)
goto badheader;
- iptr = (u32 *)((unsigned char *)headerp + 28);
+ iptr = (__be32 *)((unsigned char *)headerp + 28);
rdmalen = rpcrdma_count_chunks(rep, req->rl_nchunks, 0, &iptr);
if (rdmalen < 0)
goto badheader;
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index e36b4b5..6b79226 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -201,7 +201,7 @@
return -EPROTOTYPE;
}
- sk = sk_alloc(net, AF_TIPC, GFP_KERNEL, &tipc_proto, 1);
+ sk = sk_alloc(net, AF_TIPC, GFP_KERNEL, &tipc_proto);
if (!sk) {
tipc_deleteport(ref);
return -ENOMEM;
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 9163ec5..515e7a6 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -602,7 +602,7 @@
if (atomic_read(&unix_nr_socks) >= 2*get_max_files())
goto out;
- sk = sk_alloc(net, PF_UNIX, GFP_KERNEL, &unix_proto, 1);
+ sk = sk_alloc(net, PF_UNIX, GFP_KERNEL, &unix_proto);
if (!sk)
goto out;
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index fc416f9..92cfe8e 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -472,7 +472,7 @@
static struct sock *x25_alloc_socket(struct net *net)
{
struct x25_sock *x25;
- struct sock *sk = sk_alloc(net, AF_X25, GFP_ATOMIC, &x25_proto, 1);
+ struct sock *sk = sk_alloc(net, AF_X25, GFP_ATOMIC, &x25_proto);
if (!sk)
goto out;
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index 313d4be..0426388 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -553,9 +553,7 @@
if (copy > len)
copy = len;
- sg_set_page(&sg, virt_to_page(skb->data + offset));
- sg.offset = (unsigned long)(skb->data + offset) % PAGE_SIZE;
- sg.length = copy;
+ sg_init_one(&sg, skb->data + offset, copy);
err = icv_update(desc, &sg, copy);
if (unlikely(err))
@@ -578,9 +576,9 @@
if (copy > len)
copy = len;
- sg_set_page(&sg, frag->page);
- sg.offset = frag->page_offset + offset-start;
- sg.length = copy;
+ sg_init_table(&sg, 1);
+ sg_set_page(&sg, frag->page, copy,
+ frag->page_offset + offset-start);
err = icv_update(desc, &sg, copy);
if (unlikely(err))
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 83c5e76..5959412 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -4,23 +4,30 @@
PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
+# If a arch/$(SRCARCH)/Kconfig.$(ARCH) file exist use it
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/Kconfig.$(ARCH)),)
+ Kconfig := arch/$(SRCARCH)/Kconfig.$(ARCH)
+else
+ Kconfig := arch/$(SRCARCH)/Kconfig
+endif
+
xconfig: $(obj)/qconf
- $< arch/$(ARCH)/Kconfig
+ $< $(Kconfig)
gconfig: $(obj)/gconf
- $< arch/$(ARCH)/Kconfig
+ $< $(Kconfig)
menuconfig: $(obj)/mconf
- $< arch/$(ARCH)/Kconfig
+ $< $(Kconfig)
config: $(obj)/conf
- $< arch/$(ARCH)/Kconfig
+ $< $(Kconfig)
oldconfig: $(obj)/conf
- $< -o arch/$(ARCH)/Kconfig
+ $< -o $(Kconfig)
silentoldconfig: $(obj)/conf
- $< -s arch/$(ARCH)/Kconfig
+ $< -s $(Kconfig)
# Create new linux.po file
# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
@@ -45,27 +52,27 @@
PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig
randconfig: $(obj)/conf
- $< -r arch/$(ARCH)/Kconfig
+ $< -r $(Kconfig)
allyesconfig: $(obj)/conf
- $< -y arch/$(ARCH)/Kconfig
+ $< -y $(Kconfig)
allnoconfig: $(obj)/conf
- $< -n arch/$(ARCH)/Kconfig
+ $< -n $(Kconfig)
allmodconfig: $(obj)/conf
- $< -m arch/$(ARCH)/Kconfig
+ $< -m $(Kconfig)
defconfig: $(obj)/conf
ifeq ($(KBUILD_DEFCONFIG),)
- $< -d arch/$(ARCH)/Kconfig
+ $< -d $(Kconfig)
else
- @echo *** Default configuration is based on '$(KBUILD_DEFCONFIG)'
- $(Q)$< -D arch/$(ARCH)/configs/$(KBUILD_DEFCONFIG) arch/$(ARCH)/Kconfig
+ @echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
+ $(Q)$< -D arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
endif
%_defconfig: $(obj)/conf
- $(Q)$< -D arch/$(ARCH)/configs/$@ arch/$(ARCH)/Kconfig
+ $(Q)$< -D arch/$(SRCARCH)/configs/$@ $(Kconfig)
# Help text used by make help
help:
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index d9f78c8..1c50278 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9299,7 +9299,6 @@
.num_channel_mode = ARRAY_SIZE(alc268_modes),
.channel_mode = alc268_modes,
.input_mux = &alc268_capture_source,
- .input_mux = &alc268_capture_source,
.unsol_event = alc268_toshiba_unsol_event,
.init_hook = alc268_toshiba_automute,
},