ASoC: stm32: sai: Fix DMA burst size
Set best burst size tradeoff for 8, 16, 32 bits transfers.
Signed-off-by: olivier moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index 5e66bf31..dde8ddf 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -446,12 +446,16 @@ static int stm32_sai_set_config(struct snd_soc_dai *cpu_dai,
{
struct stm32_sai_sub_data *sai = snd_soc_dai_get_drvdata(cpu_dai);
int cr1, cr1_mask, ret;
- int fth = STM_SAI_FIFO_TH_HALF;
- /* FIFO config */
+ /*
+ * DMA bursts increment is set to 4 words.
+ * SAI fifo threshold is set to half fifo, to keep enough space
+ * for DMA incoming bursts.
+ */
regmap_update_bits(sai->regmap, STM_SAI_CR2_REGX,
SAI_XCR2_FFLUSH | SAI_XCR2_FTH_MASK,
- SAI_XCR2_FFLUSH | SAI_XCR2_FTH_SET(fth));
+ SAI_XCR2_FFLUSH |
+ SAI_XCR2_FTH_SET(STM_SAI_FIFO_TH_HALF));
/* Mode, data format and channel config */
cr1 = SAI_XCR1_PRTCFG_SET(SAI_FREE_PROTOCOL);
@@ -485,10 +489,6 @@ static int stm32_sai_set_config(struct snd_soc_dai *cpu_dai,
return ret;
}
- /* DMA config */
- sai->dma_params.maxburst = STM_SAI_FIFO_SIZE * fth / sizeof(u32);
- snd_soc_dai_set_dma_data(cpu_dai, substream, (void *)&sai->dma_params);
-
return 0;
}
@@ -731,7 +731,12 @@ static int stm32_sai_dai_probe(struct snd_soc_dai *cpu_dai)
struct stm32_sai_sub_data *sai = dev_get_drvdata(cpu_dai->dev);
sai->dma_params.addr = (dma_addr_t)(sai->phys_addr + STM_SAI_DR_REGX);
- sai->dma_params.maxburst = 1;
+ /*
+ * DMA supports 4, 8 or 16 burst sizes. Burst size 4 is the best choice,
+ * as it allows bytes, half-word and words transfers. (See DMA fifos
+ * constraints).
+ */
+ sai->dma_params.maxburst = 4;
/* Buswidth will be set by framework at runtime */
sai->dma_params.addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED;