usb: dwc3: core: cleanup IRQ resources
Implementations might use different IRQs for
host, gadget so use named interrupt resources
to allow device tree to specify the interrupts.
Following are the interrupt names
Peripheral Interrupt - peripheral
HOST Interrupt - host
Maintain backward compatibility for a single named
interrupt ("dwc3_usb3") for all interrupts as well as
unnamed interrupt at index 0 for all interrupts.
As platform_get_irq() variants are used, tackle
the -EPROBE_DEFER case as well.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index b9bc646..f209753 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1765,7 +1765,7 @@
int ret = 0;
int irq;
- irq = platform_get_irq(to_platform_device(dwc->dev), 0);
+ irq = dwc->irq_gadget;
ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
IRQF_SHARED, "dwc3", dwc->ev_buf);
if (ret) {
@@ -1773,7 +1773,6 @@
irq, ret);
goto err0;
}
- dwc->irq_gadget = irq;
spin_lock_irqsave(&dwc->lock, flags);
if (dwc->gadget_driver) {
@@ -2891,7 +2890,33 @@
*/
int dwc3_gadget_init(struct dwc3 *dwc)
{
- int ret;
+ int ret, irq;
+ struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
+
+ irq = platform_get_irq_byname(dwc3_pdev, "peripheral");
+ if (irq == -EPROBE_DEFER)
+ return irq;
+
+ if (irq <= 0) {
+ irq = platform_get_irq_byname(dwc3_pdev, "dwc_usb3");
+ if (irq == -EPROBE_DEFER)
+ return irq;
+
+ if (irq <= 0) {
+ irq = platform_get_irq(dwc3_pdev, 0);
+ if (irq <= 0) {
+ if (irq != -EPROBE_DEFER) {
+ dev_err(dwc->dev,
+ "missing peripheral IRQ\n");
+ }
+ if (!irq)
+ irq = -EINVAL;
+ return irq;
+ }
+ }
+ }
+
+ dwc->irq_gadget = irq;
dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
&dwc->ctrl_req_addr, GFP_KERNEL);