ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code
Remove the feature to configure the CLKR/FSR mux on McBSP port with 6pin
configuration.
When moving to devicetree these callback can no longer be used in a clean
way anymore.
If a board require to change the 6pin port to work in 4pin setup it needs
to set up the mux in the board file.
For OMAP2/3:
u32 devconf0;
/* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */
devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
devconf0 |= OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK;
omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
For OMAP4:
u32 mcbsp_pad;
/* McBSP4 CLKR/FSR signal to be connected to CLKX/FSX pin */
mcbsp_pad = omap4_ctrl_pad_readl(OMAP2_CONTROL_DEVCONF0);
mcbsp_pad |= ((1 << 31) | (1 << 30));
omap4_ctrl_pad_writel(mcbsp_pad, OMAP2_CONTROL_DEVCONF0);
In case when the kernel is booted with DT blob the pinctrl-single will be
provided as soon as it is enabled on the platform.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 1046083..5061594 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -516,21 +516,9 @@
return -EBUSY;
}
- if (clk_id == OMAP_MCBSP_SYSCLK_CLK ||
- clk_id == OMAP_MCBSP_SYSCLK_CLKS_FCLK ||
- clk_id == OMAP_MCBSP_SYSCLK_CLKS_EXT ||
- clk_id == OMAP_MCBSP_SYSCLK_CLKX_EXT ||
- clk_id == OMAP_MCBSP_SYSCLK_CLKR_EXT) {
- mcbsp->in_freq = freq;
- regs->srgr2 &= ~CLKSM;
- regs->pcr0 &= ~SCLKME;
- } else if (cpu_class_is_omap1()) {
- /*
- * McBSP CLKR/FSR signal muxing functions are only available on
- * OMAP2 or newer versions
- */
- return -EINVAL;
- }
+ mcbsp->in_freq = freq;
+ regs->srgr2 &= ~CLKSM;
+ regs->pcr0 &= ~SCLKME;
switch (clk_id) {
case OMAP_MCBSP_SYSCLK_CLK:
@@ -558,20 +546,6 @@
case OMAP_MCBSP_SYSCLK_CLKR_EXT:
regs->pcr0 |= SCLKME;
break;
-
-
- case OMAP_MCBSP_CLKR_SRC_CLKR:
- err = omap_mcbsp_6pin_src_mux(mcbsp, CLKR_SRC_CLKR);
- break;
- case OMAP_MCBSP_CLKR_SRC_CLKX:
- err = omap_mcbsp_6pin_src_mux(mcbsp, CLKR_SRC_CLKX);
- break;
- case OMAP_MCBSP_FSR_SRC_FSR:
- err = omap_mcbsp_6pin_src_mux(mcbsp, FSR_SRC_FSR);
- break;
- case OMAP_MCBSP_FSR_SRC_FSX:
- err = omap_mcbsp_6pin_src_mux(mcbsp, FSR_SRC_FSX);
- break;
default:
err = -ENODEV;
}