Detect the MIPS R2 vectored interrupt, external interrupt controller
options and the precense of the MT ASE.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/include/asm-mips/cpu-features.h b/include/asm-mips/cpu-features.h
index bb2212c..698c2112 100644
--- a/include/asm-mips/cpu-features.h
+++ b/include/asm-mips/cpu-features.h
@@ -109,6 +109,14 @@
#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP)
#endif
+#ifdef CONFIG_MIPS_MT
+#ifndef cpu_has_mipsmt
+# define cpu_has_mipsmt (cpu_data[0].ases & MIPS_ASE_MIPSMT)
+#endif
+#else
+# define cpu_has_mipsmt 0
+#endif
+
#ifdef CONFIG_32BIT
# ifndef cpu_has_nofpuex
# define cpu_has_nofpuex (cpu_data[0].options & MIPS_CPU_NOFPUEX)
@@ -145,6 +153,22 @@
# endif
#endif
+#ifdef CONFIG_CPU_MIPSR2
+# if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
+# define cpu_has_vint (cpu_data[0].options & MIPS_CPU_VINT)
+# else
+# define cpu_has_vint 0
+# endif
+# if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic)
+# define cpu_has_veic (cpu_data[0].options & MIPS_CPU_VEIC)
+# else
+# define cpu_has_veic 0
+# endif
+#else
+# define cpu_has_vint 0
+# define cpu_has_veic 0
+#endif
+
#ifndef cpu_has_subset_pcaches
#define cpu_has_subset_pcaches (cpu_data[0].options & MIPS_CPU_SUBSET_CACHES)
#endif
diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h
index e692744..3bbb643 100644
--- a/include/asm-mips/cpu.h
+++ b/include/asm-mips/cpu.h
@@ -227,6 +227,8 @@
#define MIPS_CPU_LLSC 0x00010000 /* CPU has ll/sc instructions */
#define MIPS_CPU_SUBSET_CACHES 0x00020000 /* P-cache subset enforced */
#define MIPS_CPU_PREFETCH 0x00040000 /* CPU has usable prefetch */
+#define MIPS_CPU_VINT 0x00080000 /* CPU supports MIPSR2 vectored interrupts */
+#define MIPS_CPU_VEIC 0x00100000 /* CPU supports MIPSR2 external interrupt controller mode */
/*
* CPU ASE encodings
@@ -236,5 +238,7 @@
#define MIPS_ASE_MIPS3D 0x00000004 /* MIPS-3D */
#define MIPS_ASE_SMARTMIPS 0x00000008 /* SmartMIPS */
#define MIPS_ASE_DSP 0x00000010 /* Signal Processing ASE */
+#define MIPS_ASE_MIPSMT 0x00000020 /* CPU supports MIPS MT */
+
#endif /* _ASM_CPU_H */
diff --git a/include/asm-mips/mipsmtregs.h b/include/asm-mips/mipsmtregs.h
index 9aaefc1..eda24c2 100644
--- a/include/asm-mips/mipsmtregs.h
+++ b/include/asm-mips/mipsmtregs.h
@@ -175,8 +175,8 @@
" .set noreorder \n"
" .set noat \n"
" .set mips32r2 \n"
- " move $1, %0 \n"
" .word 0x41610001 # dvpe $1 \n"
+ " move %0, $1 \n"
" ehb \n"
" .set pop \n"
: "=r" (res));
@@ -214,12 +214,13 @@
int res;
__asm__ __volatile__(
- " .set noreorder \n"
+ " .set push \n"
" .set mips32r2 \n"
- " dmt %0 \n"
+ " .set noat \n"
+ " .word 0x41610BC1 # dmt $1 \n"
" ehb \n"
- " .set mips0 \n"
- " .set reorder \n"
+ " move %0, $1 \n"
+ " .set pop \n"
: "=r" (res));
instruction_hazard();
@@ -251,7 +252,10 @@
static inline void ehb(void)
{
- __asm__ __volatile__("ehb");
+ __asm__ __volatile__(
+ " .set mips32r2 \n"
+ " ehb \n"
+ " .set mips0 \n");
}
#define mftc0(rt,sel) \
@@ -259,10 +263,14 @@
unsigned long __res; \
\
__asm__ __volatile__( \
- " .set noat\n\t" \
- " mftc0\t%0," #rt ", " #sel "\n\t" \
- " .set at\n\t" \
- : "=r" (__res)); \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " .set noat \n" \
+ " # mftc0 $1, $" #rt ", " #sel " \n" \
+ " .word 0x41000800 | (" #rt " << 16) | " #sel " \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__res)); \
\
__res; \
})
@@ -272,9 +280,10 @@
unsigned long __res; \
\
__asm__ __volatile__( \
- " .set noat \n" \
+ " .set push \n" \
+ " .set mips32r2 \n" \
" mftgpr %0," #rt " \n" \
- " .set at \n" \
+ " .set pop \n" \
: "=r" (__res)); \
\
__res; \
@@ -294,17 +303,30 @@
})
#define mttgpr(rd,v) \
-({ \
+do { \
__asm__ __volatile__( \
- "mttgpr %0," #rd \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mttgpr $1, " #rd " \n" \
+ " .word 0x41810020 | (" #rd " << 11) \n" \
+ " .set pop \n" \
: : "r" (v)); \
-})
+} while (0)
#define mttc0(rd,sel,v) \
({ \
__asm__ __volatile__( \
- "mttc0\t %0," #rd ", " #sel \
- : : "r" (v)); \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mttc0 %0," #rd ", " #sel " \n" \
+ " .word 0x41810000 | (" #rd " << 11) | " #sel " \n" \
+ " .set pop \n" \
+ : \
+ : "r" (v)); \
})
@@ -324,42 +346,42 @@
/* you *must* set the target tc (settc) before trying to use these */
-#define read_vpe_c0_vpecontrol() mftc0($1, 1)
-#define write_vpe_c0_vpecontrol(val) mttc0($1, 1, val)
-#define read_vpe_c0_vpeconf0() mftc0($1, 2)
-#define write_vpe_c0_vpeconf0(val) mttc0($1, 2, val)
-#define read_vpe_c0_status() mftc0($12, 0)
-#define write_vpe_c0_status(val) mttc0($12, 0, val)
-#define read_vpe_c0_cause() mftc0($13, 0)
-#define write_vpe_c0_cause(val) mttc0($13, 0, val)
-#define read_vpe_c0_config() mftc0($16, 0)
-#define write_vpe_c0_config(val) mttc0($16, 0, val)
-#define read_vpe_c0_config1() mftc0($16, 1)
-#define write_vpe_c0_config1(val) mttc0($16, 1, val)
-#define read_vpe_c0_config7() mftc0($16, 7)
-#define write_vpe_c0_config7(val) mttc0($16, 7, val)
-#define read_vpe_c0_ebase() mftc0($15,1)
-#define write_vpe_c0_ebase(val) mttc0($15, 1, val)
-#define write_vpe_c0_compare(val) mttc0($11, 0, val)
+#define read_vpe_c0_vpecontrol() mftc0(1, 1)
+#define write_vpe_c0_vpecontrol(val) mttc0(1, 1, val)
+#define read_vpe_c0_vpeconf0() mftc0(1, 2)
+#define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val)
+#define read_vpe_c0_status() mftc0(12, 0)
+#define write_vpe_c0_status(val) mttc0(12, 0, val)
+#define read_vpe_c0_cause() mftc0(13, 0)
+#define write_vpe_c0_cause(val) mttc0(13, 0, val)
+#define read_vpe_c0_config() mftc0(16, 0)
+#define write_vpe_c0_config(val) mttc0(16, 0, val)
+#define read_vpe_c0_config1() mftc0(16, 1)
+#define write_vpe_c0_config1(val) mttc0(16, 1, val)
+#define read_vpe_c0_config7() mftc0(16, 7)
+#define write_vpe_c0_config7(val) mttc0(16, 7, val)
+#define read_vpe_c0_ebase() mftc0(15,1)
+#define write_vpe_c0_ebase(val) mttc0(15, 1, val)
+#define write_vpe_c0_compare(val) mttc0(11, 0, val)
/* TC */
-#define read_tc_c0_tcstatus() mftc0($2, 1)
-#define write_tc_c0_tcstatus(val) mttc0($2,1,val)
-#define read_tc_c0_tcbind() mftc0($2, 2)
-#define write_tc_c0_tcbind(val) mttc0($2,2,val)
-#define read_tc_c0_tcrestart() mftc0($2, 3)
-#define write_tc_c0_tcrestart(val) mttc0($2,3,val)
-#define read_tc_c0_tchalt() mftc0($2, 4)
-#define write_tc_c0_tchalt(val) mttc0($2,4,val)
-#define read_tc_c0_tccontext() mftc0($2, 5)
-#define write_tc_c0_tccontext(val) mttc0($2,5,val)
+#define read_tc_c0_tcstatus() mftc0(2, 1)
+#define write_tc_c0_tcstatus(val) mttc0(2,1,val)
+#define read_tc_c0_tcbind() mftc0(2, 2)
+#define write_tc_c0_tcbind(val) mttc0(2,2,val)
+#define read_tc_c0_tcrestart() mftc0(2, 3)
+#define write_tc_c0_tcrestart(val) mttc0(2,3,val)
+#define read_tc_c0_tchalt() mftc0(2, 4)
+#define write_tc_c0_tchalt(val) mttc0(2,4,val)
+#define read_tc_c0_tccontext() mftc0(2, 5)
+#define write_tc_c0_tccontext(val) mttc0(2,5,val)
/* GPR */
-#define read_tc_gpr_sp() mftgpr($29)
-#define write_tc_gpr_sp(val) mttgpr($29, val)
-#define read_tc_gpr_gp() mftgpr($28)
-#define write_tc_gpr_gp(val) mttgpr($28, val)
+#define read_tc_gpr_sp() mftgpr(29)
+#define write_tc_gpr_sp(val) mttgpr(29, val)
+#define read_tc_gpr_gp() mftgpr(28)
+#define write_tc_gpr_gp(val) mttgpr(28, val)
#endif /* Not __ASSEMBLY__ */
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index 89aac1e..a7a43ff 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -528,6 +528,7 @@
#define MIPS_CONF3_TL (_ULCAST_(1) << 0)
#define MIPS_CONF3_SM (_ULCAST_(1) << 1)
+#define MIPS_CONF3_MT (_ULCAST_(1) << 2)
#define MIPS_CONF3_SP (_ULCAST_(1) << 4)
#define MIPS_CONF3_VINT (_ULCAST_(1) << 5)
#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6)