i2c: Fix error value returned by several bus drivers
When adding checks for ACPI resource conflicts to many bus drivers,
not enough attention was paid to the error paths, and for several
drivers this causes 0 to be returned on error in some cases. Fix this
by properly returning a non-zero value on every error.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index b6807db..5b667e5 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -140,7 +140,7 @@
defined to make the transition easier. */
static int __devinit ali1535_setup(struct pci_dev *dev)
{
- int retval = -ENODEV;
+ int retval;
unsigned char temp;
/* Check the following things:
@@ -155,6 +155,7 @@
if (ali1535_smba == 0) {
dev_warn(&dev->dev,
"ALI1535_smb region uninitialized - upgrade BIOS?\n");
+ retval = -ENODEV;
goto exit;
}
@@ -167,6 +168,7 @@
ali1535_driver.name)) {
dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
ali1535_smba);
+ retval = -EBUSY;
goto exit;
}
@@ -174,6 +176,7 @@
pci_read_config_byte(dev, SMBCFG, &temp);
if ((temp & ALI1535_SMBIO_EN) == 0) {
dev_err(&dev->dev, "SMB device not enabled - upgrade BIOS?\n");
+ retval = -ENODEV;
goto exit_free;
}
@@ -181,6 +184,7 @@
pci_read_config_byte(dev, SMBHSTCFG, &temp);
if ((temp & 1) == 0) {
dev_err(&dev->dev, "SMBus controller not enabled - upgrade BIOS?\n");
+ retval = -ENODEV;
goto exit_free;
}
@@ -198,12 +202,11 @@
dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
dev_dbg(&dev->dev, "ALI1535_smba = 0x%X\n", ali1535_smba);
- retval = 0;
-exit:
- return retval;
+ return 0;
exit_free:
release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
+exit:
return retval;
}